TY - THES A1 - Keser, Abdulkerim T1 - Der Europäische Automobilsektor : Besteuerung, Marktliberalisierung und Beitrag zur CO₂-Reduktion T1 - The European automotive sector : taxation, market liberalization and CO₂ reduction N2 - Der Automobilsektor ist derzeit einer der wichtigsten Industriezweige in Europa. Ca. 2,2 Millionen Mitarbeiter sind direkt, weitere 9,8 Millionen indirekt darin beschäftigt (sechs Prozent aller Beschäftigten in Europa) und erwirtschaften mit einem Umsatz von ca. € 780 Milliarden im Jahr einen bedeutenden Teil des europäischen Bruttoinlandprodukts (BIP). Auch aus Sicht der Konsumenten ist das Auto für 80 % der Europäischen Haushalte, die ein Auto besitzen, aus dem täglichen Leben nicht mehr weg zu denken. Die europäischen Staaten beziehen ca. € 380 Milliarden ihrer Steuereinnahmen aus der Automobilindustrie. Damit haben sowohl Staaten, Konsumenten als auch die Automobilindustrie ein gewichtiges Interesse am Florieren der Branche. Die Schattenseite der Automobilindustrie sind die CO2-Emissionen, die mit 20 % (der Anteil lag 1970 bei 12 %) aller CO2-Emissionen in Europa einen wesentlichen Teil zum Klimawandel beitragen, Tendenz steigend. So haben im Lauf der vergangenen Jahre mehr und mehr Staaten ihre Besteuerung der Pkw explizit oder implizit nach Umweltstandards ausgerichtet. Damit soll das Autofahren verteuert oder eingeschränkt und / oder die Nutzung von schadstoffarmen Pkw gefördert werden. Neben den Klimaschutz verfolgt die Europäische Union (EU) das Ziel, einen einheitlichen europäischen Binnenmarkt zu schaffen. Durch den Mangel an verbindlichen EU-Richtlinien im Bezug auf Abgaben, haben die Gesetze, Steuern und Abgaben auf einzelstaatlicher und regionaler Ebene ein kaum mehr zu überschauendes Maß angenommen, da Im Rahmen des Subsidiaritätsprinzips die Mitgliedsländer weiterhin ihr Steuersystem überwiegend autonom gestalten, sofern dies im Einklang mit bestimmten europaweiten Vorgaben steht. Dies führt zu einem sehr heterogenen Steuersystem, das gerade im Bereich des Verkehrs bedeutende Markteffekte (z. B. höhere Zulassungszahlen für Diesel betriebene Pkw oder kürzere Haltedauern) nach sich zieht. Europaweit einheitlich sind lediglich Regelungen zu Wettbewerbsbeschränkungen. Es lassen sich nach wie vor viele Beispiele für Marktverzerrungen und die Heterogenität der Steuersysteme in Europa finden: Marktverzerrungen und Wettbewerbsbeschränkungen zeigen sich bei Fahrzeugpreisen, die in Europa stark variieren. Beispielsweise kosten in Dänemark Pkw bis zu 37 % weniger als in Deutschland. Diese Arbeit untersucht und vergleicht die Abgaben auf den Erwerb, den Besitz und die Nutzung von Pkw in den EU-Ländern sowie Norwegen und der Schweiz sowohl systematisch als auch quantitativ. Zur quantitativen Analyse wurde eine Datenbank mit den zur Steuerberechnung notwendigen Informationen erstellt. Darunter sind beispielswiese: Steuersätze und –tarife, Fahrzeugdaten, Kraftstoffpreise, Instandhaltungskosten, Versicherungsbeitrage, Wechselkurse und der durchschnittliche Wertverlust der Fahrzeuge. Darauf und auf bestimmten Annahmen basierend wurden die absoluten Abgaben für repräsentative Fahrzeuge in den verschiedenen Ländern berechnet. Besonderes Augenmerk gilt der CO2-orientierten Besteuerung, die in 17 Ländern (zumindest teilweise) eingeführt wurde. Diese Arbeit betrachtet auch andere, d. h. nicht fiskalische Maßnahmen der Europäischen Union zur CO2-Reduzierung, vergleicht diese mit alternativen Instrumenten, und analysiert die Wirkung unterschiedlicher Besteuerung auf den Pkw-Binnenmarkt, z. B. den Einfluss von Abgaben auf die europäischen Automobilpreise und damit auf Arbitrageeffekte. Es zeigt sich, dass die Besteuerung in Europa sowohl in der Abgabenhöhe als auch konzeptionell in der Vielzahl der Bemessungsgrundlagen und Steuertarife sehr heterogen ist und maßgeblich zu den sehr unterschiedlichen Gesamtkosten der Pkw-Nutzung beiträgt. Die relative Abgabenlast ist in einkommensstarken Ländern Westeuropas nicht hoch genug, um den Kraftstoffverbrauch spürbar zu reduzieren. Aus dem gleichen Grund ist von der CO2-orientierten Novellierung der deutschen Kfz-Steuer kein ausreichender Kaufanreiz zugunsten effizienterer Fahrzeuge zu erwarten. Die in der Vergangenheit von der Europäischen Union eingeführten Instrumente zur Reduzierung von CO2-Emissionen aus dem Straßenverkehr führten nicht zu den erwünschten Emissionsverringerungen. Die jüngste Maßnahme der Europäischen Union, den Automobilherstellern Emissionsgrenzen vorzuschreiben, ist weder effektiv noch effizient. Im letzten Jahrzehnt haben sich die Automobilpreise in Europa zwar etwas angeglichen. Dies liegt weniger an einer Angleichung in der Besteuerung als an der schrittweisen Liberalisierung des europäischen Automobilmarktes und den Novellierungen der Gruppenfreistellungsverordnung. N2 - The automotive industry is currently one of the most important industries in Europe. Approximately 2.2 million people are directly employed in this industry, and an additional 9.8 million jobs indirectly depend on it. This represents 6 percent of all jobs in Europe. A significant amount of Europe’s gross domestic product is generated in this sector which produces a turnover of approximately € 780 billion per year. Governments, consumers and car manufacturers have a significant interest in a flourish automotive industry: 80 % of all European households own a car and rely on it in their day to day life and the European member states are collecting approximately € 380 billion in tax revenue from the automotive industry. One of the problems caused by the automotive sector are the carbon dioxide (CO2) emissions and their impact on the environment. 20 % of all CO2 emissions in Europe are currently caused by cars, being a major contributor to climate change. The contribution has increased from 12% in 1970 and is expected to grow even further in the future. Consequently, several countries recently introduced taxes that consider carbon emissions with the aim to reduce the use of cars, or to incentivise the use of more fuel efficient vehicles. The automotive sector is not only relevant for the European Union’s (EU) climate policy, but for its broader goal to ensure a functioning internal market with free movement of people, goods, services, and capital. However, the degree to which a free internal market can be achieved also depends on the homogeneity of the tax system throughout the EU. To date, taxes and other duties are still very heterogeneous across the EU, due to the lack of binding regulations and directives with respect to taxes – in accordance with the principle of subsidiarity embedded in the Maastricht treaty. These differences affect the automotive sector, for example in terms of demand for diesel cars, or the average number of years that a car is used. More importantly, market distortions can still be observed in the automotive sector: Heterogeneous tax systems lead to vastly different car prices within the EU, e.g. cars are up to 37% cheaper in Denmark than in Germany. This study compares and analyses - both quantitatively and qualitatively - taxes and duties on cars in connection with their purchase and registration, ownership and tenure as well as use. The analysis covers all 27 EU member countries, Switzerland and Norway. For the quantitative analysis, a software based database and simulation tool was developed. This tool contains all relevant data, such as tax rates, tax scales, car characteristics, fuel prices, car maintenance costs or depreciation rates. The simulation tool uses the data to calculate taxes and duties for a number of specific cars models (selected representatively covering all segments) for each of the 29 countries, relying on certain assumptions where necessary. The analysis focuses particularly on taxes introduced to reduce the CO2 emission of cars in the EU, namely CO2 based taxes of motor vehicles, which have been introduced in 17 of the 29 countries. This thesis also considers other, non fiscal measures of the EU that are designed to reduce CO2 emis¬sions of cars. These measures are subsequently analysed and compared to other instruments in order to understand the impact of different taxation models on the European internal car market, for example, with respect to car prices in the EU and hence potential for arbitrage. The thesis demonstrates that material differences in taxation of cars exist, both regarding the total amount of taxes levied in similar circumstances, but also regarding the underlying concepts and bases for assessment. This heterogeneity results in vastly different costs of purchasing, owning and driving a car. In the relatively wealthy countries in Western Europe, costs are not sufficiently high to have a notable impact on the consumption of fuel. This is also why the new German tax on car ownership, although based on the average fuel consumption, is not expected to create a significant incentive for consumers to buy more fuel efficient cars. Similarly, the EU measures to reduce CO2 emissions of car usage failed to deliver the desired outcomes. The most recent instrument of the EU, prescribing emission thresholds for car manufacturers, is neither effective nor efficient. The thesis also shows that during the last ten years car prices in the countries of Europe have converged. However, this is less due to the increasing similarities in taxation, but instead due to the gradual liberalisation of the European car market and the renewal of the block exemption for the motor vehicle sector. KW - Besteuerung KW - Kfz KW - Automobil KW - Gruppenfreistellungsverordnung KW - CO₂ KW - car KW - automotive KW - vehicle KW - taxation KW - carbon dioxide KW - block exemption Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-60269 SN - 978-3-86956-197-4 PB - Universitätsverlag Potsdam CY - Potsdam ER - TY - THES A1 - Sauer, Patrick T1 - Liberation of low molecular weight organic acids from sedimentary organic matter and their role on microbial activity N2 - Low molecular weight organic acids (LMWOAs) are important nutrients for microbes. However, most LMWOAs do not exist freely in the environment but are bound to macromolecular organic matter, e.g. kerogen, lignite and coal. During burial and geological maturation of sedimentary macromolecular organic matter biological and abiological processes promote the liberation of LMWOAs into the surrounding sediment. Through this process, microbes in sedimentary subsurface environments are supplied with essential nutrients. To estimate the feedstock potential of buried macromolecular organic matter to many environments it is important to determine the amount of LMWOAs that are bound to such a matrix. However, high-pressure and high temperature are a key feature of deep subsurface environments, and these physical parameters have a profound influence on chemical reaction kinetics. Therefore it is essential for the estimation of the feedstock potential to generate high-pressure and high temperature for the liberation of LMWOAs to recreate true in-situ conditions. This work presents a newly developed, inexpensive incubation system for biological and geological samples. It allows the application of high-pressure and high temperature as well as a subsampling of the liquid phase without loss of pressure, thereby not disturbing the on-going processes. When simulating the liberation of LMWOAs from sedimentary organic matter, the newly developed incubation system produces more realistic results than other extraction systems like Soxhlet. The extraction products remain in the extraction medium throughout the extraction, influencing the chemical conditions of the extraction medium. Sub-bituminous coal samples from New Zealand as well as lignite samples from Germany were extracted at elevated temperature (90˚C) and pressure (5 MPa). The main LMWOAs released from these low rank coals were formate, acetate and oxalate. Extraction efficiency was increased by two to four times for formate, acetate and oxalate in comparison to existing extraction methods without pressurisation and with demineralised water. This shows the importance of pressure for the simulation of true in-situ conditions and suggests that the amount of bioavailable LMWOAs is higher than previously thought. With the increase in carbon capture and storage (CCS) and the enhanced recovery of oil and gas (EOR/EGR), more and more CO2 becomes injected into the underground. However, the effects of elevated concentrations of carbon dioxide on sedimentary organic matter are rarely investigated. As the incuabtion system allows the manipulation of the composition and partial pressure of dissolved gasses, the effect of highly gas-enriched (CO2, CO2/SO2, CO2/NO2; to simulate flue gas conditions) waters on the extraction yield of LMWOAs from macromolecular organic matter was evaluated. For sub-bituminous coal the concentrations of all LMWAOs decreased upon the addition of gas, irrespective of its composition, whereas for lignite formate always and acetate mostly increased, while oxalate decreased. This suggests an positive effect on the nutrient supply for the subsurface microbiota of lignite layers, as formate and acetate are the most common LMWOAs used for microbial metabolism. In terrestrial mud volcanoes (TMVs), sedimentary material is rapidly ascending from great depth to the surface. Therefore LMWOAs that were produced from buried macromolecular organic matter at depth are also brought up to the surface, and fuel heterotrophic microbial ecosystems at the surface. TMVs represent geochemically and microbiologically diverse habitats, which are supplied with organic substrates and electron acceptors from deep-seated hydrocarbon-generating systems and intersected shallow aquifers, respectively. The main electron donor in TMVs in Azerbaijan is sulphate, and microbial sulphate reduction leads to the production of a wide range of reduced sulphur species that are key players in several biological processes. In our study we estimated the effect of LMWOAs on the sulphur metabolising activity of microorganims in TMVs from Azerbaijan. The addition of a mixture of volatile fatty acids containing acetate and other LMWOAs showed significant positive response to the sulphate reduction rate (SRR) of samples of several mud volcanoes. Further investigations on the temperature dependency of the SRR and the characterisation of thermophilic sulphate-reducing bacteria (SRB) showed a connection between the deep hot subsurface and the surface. N2 - Niedermolekulare organische Säuren (nachfolgend als LMWOAs - low molecular weight organic acids - bezeichnet) stellen wichtige mikrobielle Substrate dar. Jedoch liegen die meisten LMWOAs nicht in freier, bioverfügbarer Form vor, sondern sind vielmehr an hochmolekulare organische Substanzen gebunden, z.B. Kerogen, Lignit und Kohle. Während der geologischen Verbringung in tiefe Erdschichten und der geologischen Reifung von sedimentären hochmolekularen organischen Substanzen, führen biologische und abiologische Prozesse zu einer Freisetzung von LMWOAs in die umgebenden Sedimente. Durch diesen Prozess werden Mikroorganismen in unterirdischen sedimentären Ökosystemen mit essentiellen Nährstoffen versorgt. Um das Nährstoffpotential tief liegender hochmolekularer organischer Substanzen für diverse Ökosystemen abschätzen zu können, ist es notwendig, die Menge an LMWOAs, die an solch eine hochmolekulare Matrix gebunden ist, zu bestimmen. Dabei stellen hoher Druck sowie hohe Temperatur entscheidende Faktoren in tiefen unterirdischen Ökosystemen dar, welche einen signifikanten Einfluss auf chemische Reaktionen haben. Daher ist es für die Abschätzung des Nährstoffpotentials entscheidend, hohen Druck und hohe Temperatur bei der Freisetzung von LMWOAs zu erzeugen, um wahre in situ Bedingungen zu schaffen. In der vorliegenden Arbeit wird ein neu entwickeltes, preiswertes Inkubationssystem für biologische und geologische Proben präsentiert. Es erlaubt die Verwendung von hohem Druck als auch hoher Temperatur sowie eine Unterprobennahme der flüssigen Phase ohne Druckverlust, um den fortlaufende Prozess nicht zu unterbrechen. Bei der Simulierung der Freisetzung von LMWOAs aus sedimentären organischen Substanzen erhält man mit dem neu entwickelten Inkubationssystem realistischere Resultate als mit anderen Extraktionssystemen, wie z.B. eine Soxhlet-Apparatur. Die Extraktionsprodukte verbleiben während der Extraktion im Extraktionsmedium, wodurch die chemischen Bedingungen verändert werden. Kohleproben aus Neuseeland sowie aus Deutschland wurden mittels erhöhter Temperatur (90°C) und Druck (5 MPa) extrahiert. Die wichtigsten LMWOAs, die aus diesen Kohlen freigesetzt wurden, waren Formiat, Acetat und Oxalat. Die Extraktionseffizienz für diese LMWOAs konnte im Vergleich zu existierenden Extraktionsmethoden ohne Druck um den Faktor 2 bis 4 gesteigert werden. Dies zeigt die Bedeutung von Druck bei der Simulation von in situ Bedingungen und legt nahe, dass die Menge an bioverfügbaren LMWOAs größer ist als bisher angenommen. Durch die Zunahme der CO2-Speicherung im Untergrund (carbon capture and storage, CCS) sowie der erweiterten Förderung von Öl und Gas (enhanced recovery of oil and gas, EOR/EGR) wird immer mehr CO2 in den Untergrund gepresst. Jedoch sind die Auswirkungen von erhöhten CO2-Konzentrationen auf sedimentäre organische Materie noch unerforscht. Da mit dem Inkubationssystem die Veränderung der Zusammensetzung und des Partialdruckes von gelösten Gasen möglich ist, wurde der Effekt von hoch mit Gasen (CO2, CO2/SO2, CO2/NO2; um Kraftwerksabgase zu simulieren) angereicherten Wässern auf die Extraktionsausbeute von LMWOAs untersucht. Bei der subbituminösen Kohle zeigte sich eine Abnahme aller LMWOAs-Konzentrationen durch die Lösung von Gas im Extraktionsmedium, wobei die Art des Gases keine Rolle spielte. Bei Lignit konnte hingegen festgestellt werden, dass die Extraktionsausbeute an Formiat immer und an Acetat meistens erhöht wurde, während sie sich bei Oxalat verringerte. Dies deutet auf einen positiven Effekt für die Nährstoffversorgung von Mikroorganismen um Lignit-Lagerstätten an, da Formiat und Acetat die am häufigsten verwendeten LMWOAs im mikrobiellen Stoffwechsel darstellen. In terrestrischen Schlammvulkanen (terrestrial mud volcanoes, TMVs) steigt sedimentäres Material aus großen Tiefen an die Erdoberfläche. Somit werden auch LMWOAs, welche aus hochmolekularen organischen Substanzen freigesetzt werden, an die Oberfläche verbracht, und ermöglichen dort heterotrophe Ökosysteme. TMVs stellen dabei geochemisch und mikrobiell unterschiedliche Habitate dar, welche mit organischen Substraten und Elektronenakzeptoren aus tief liegenden, Kohlenwasserstoffe erzeugenden Systemen versorgt werden. In TMVs in Aserbaidschan stellt Sulfat den Hauptelektronenakzeptor dar, wobei mikrobielle Sulfatreduktion zu einer Vielzahl an reduzierten Schwefelspezies führt. In der vorliegenden Arbeit wurde der Effekt von LMWOAs auf die Aktivität von Mikroorganismen bei der Umsetzung von Schwefel in TMVs in Aserbaidschan untersucht. Die Zugabe einer Mischung verschiedener kurzkettiger Fettsäuren zu Schlammproben verschiedener TMVs erzeugte eine signifikant positive Reaktion in Bezug auf die Sulfat-Reduktionsraten. Weiterführende Untersuchungen zur Temperaturabhängigkeit der Sulfat-Reduktionsraten und die Charakterisierung thermophiler, Sulfat-Reduzierender Bakterien zeigte eine Verbindung zwischen der tiefen, heißen Biosphäre und der Erdoberfläche auf. T2 - Freisetzung niedermolekularer organischer Säuren aus sedimentärer organischer Materie und ihre Rolle auf die mikrobielle Aktivität KW - low molecular weight organic acids KW - sedimentary organic matter KW - carbon dioxide KW - high-pressure incubation system KW - microbial activity Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-68830 ER - TY - THES A1 - Nada, Wael Mohamed Abdel-Rahman T1 - Wood compost process engineering, properties and its impact on extreme soil characteristics N2 - The landfilling of biodegradable waste is proven to contribute to environmental degradation. Much wood and lumber is discharged as waste from the cleared fields. These woody wastes are subsequently disposed of by burning. However, it would be preferable to dispose of them without combustion to avoid the release of carbon dioxide, one of the critical greenhouse gases. Instead of burning these woody wastes, we should recycle them as future resources. One solution to this problem is to make compost from the waste. Compost use in agriculture is increasing as both an alternative to landfilling for the management of biodegradable waste, as well as means of increasing or preserving soil organic matter. This research aimed to contribute to the identification of a system for managing the production and utilization of wood waste (Quercus rubra and Pinus sylvestris) compost for sustainable agriculture, with particular regards to carbon dioxide produced from both compost and combustion of wood. Compost of wood was implemented in two consecutive trials. The first was carried out in greenhouse experiment in 4 liter pot of Quercus rubra and Pinus sylvestris (QR and PS) moisted by compost and tap water and infected by tiger worm (Eisenia fetida, EF) and European night crawlers (Dendrobaena veneta, DV) at different mixed ratios with lake mud (LM). The second was conducted in greenhouse experiment in 40 liter pot of the successful wood and worm from the first compost trial (QR and EF respectively). The tested wood (QR) was mixed separately by lake mud and horse manure and irrigated by compost and tap water. The final product, successful wood compost (QR) produced from the first trial (4 liter pot) was utilized in different mixed ratios with coal mine tailings (tertiary sand) in greenhouse pot trial to study his effects on improving soil physical and chemical properties and some plant growth parameters of RSM 7.2.1 grass. The wood compost produced from the second compost experiment (40 liter pot) and other artificial component named Arkadolith® were used as soil amelioration in field experiments of different selected sites with extremely unsuitable characteristics (tertiary and quaternary sand in Lusatia lignite region, Germany). The soil in each site was sowed by RSM 7.2.1 and autochthonous grasses. Also, some vermicompost samples were selected to study its thermal stability which compared with a soil sample (Niedermoorgleys) by using thermogravimetric analysis technique. Further investigation was achieved to evaluate the effect of charcoal as a source of carbon on vermicompost stability. Moreover some selected vermicompost samples were used to examine its microstructure under scanning electron microscope which compared also with the same soil used in thermal analysis. The obtained results under all studied experiments can be arranged as follow: First compost trial, Cumulative amount of carbon dioxide produced during composting period was lower than that evolved by combustion of wood. The results showed composting of wood can reduce the emitted CO2 up to 50 % when compared with the amount of CO2 produced from combustion of wood. The effect of different studied factors on different studied parameters show that, QR wood compost have more responsive to decomposition processes and humification rate in comparison with PS wood compost. Under different infection worms, Eisenia fetida (EF) was better than Dendrobaena veneta (DV) in biodegradation rate. Compost water has had a better impact of tap water in all studied decomposition parameters. For example, The compost content of OM and total OC was decreased with the increase of the decomposition period in the treatments of compost water and EF worm, where this decrease was higher at mixed ratio of 1:3 (wood: mud, w/w). The total content of N in the final products takes reversible trend regarding to OM and C content. The high content of N was found in QR wood compost moisted by compost water and infected by EF worm. The content of both macro-and micro-nutrients was clearly positive affected by the studied factors. The content of these nutrients in QR wood compost was higher than that found in the compost of PS wood. Second compost trial, The observed data show that, the amount of CO2 produced by composting was lower than that evolved by combustion of wood. Composting of wood reduced CO2 emission up to 40 % of the combustion wood CO2. Cumulative amount of CO2 produced from wood compost treated by horse manure was higher than that fount in the other treated by LM. The compost of wood treated by horse manure has had a high decomposition rate in comparison with that treated by lake mud. The treatments left without worms during all composting period and moisted by compost water have a responsive effects but it was lower than that infected by worms. Total and available contents of N, P, K, Mg, Zn, and Cu in the compost treated by HM were higher than that found in compost treated by LM. The other nutrients (Ca, Fe, Cu, and Mn) take reversible trend, which it was higher in LM than HM treatments. Thermal and microstructure analysis, The selected vermicompost samples from both first and second compost experiments showed, up to 200° C temperature the mass loss was due to free water and bound water (It was in vermicompost samples higher than soil sample). Mass loss from 200 to 550° C is due to easily oxidizable organic forms and it was higher in vermicompost than soil. In this stage the soil OM seems to be more stable than vermicompost which can be explained by a more intensive bond between the organic and inorganic components. At higher temperatures (T> 550° C) no significant detectable was appeared of soil organic matter. In contrast, the vermicompost treatments showed a high proportion of stable groups, especially aromatic compounds. These statements seem to be importance particularly for the practical application of the wood compost in terms of their long-term effect in the soil. The application of charcoal, showed no additional stabilizing effect of vermicompost. Also, the data show that, vermicompost structure characterized with high homogeneity and ratio of surface area to volume compared to those in soil structure. First plant trials (greenhouse), Different compost mixed ratios had positive impact on different extreme soil physiochemical properties. At the end of experiment (42 days) compost increased soil water holding capacity, decreased soil bulk and particle density and increased total porosity. The used wood compost modified soil buffering capacity and soil acidity. The availability of soil macro and micro nutrients were increased after adding wood compost. The wood compost had a positive effect in some growth parameters like fresh and dry matter yield of the selected grass. High dry matter yield and nutrients uptake was achieved with higher rates of compost application (25.0% > 12.5% > 3.0% > 0.0 %, w/w). Second plant trials (field experiment), Regarding to the effect of wood compost (QR) and Arkadolith® component on tertiary and quaternary sand, at the end of grown season (6 month) most soil and plant characteristics of tertiary sand were improved and it was better than that in quaternary sand. This trend reveals to, physical and chemical properties of tertiary sand was better than that in quaternary sand, like organic matter content, CEC, WHC, TOC, available nutrients. In the both sites, the effects of different type of soil conditioners arranged as follow: the treatments treated with wood compost is the better followed by the other treated with both wood compost and Arkadolith. Wood compost increased soil pH, CEC, soil buffering capacity, OM content, and soil WHC in comparison with Arkadolith which make a small improvement of these properties in both sites. Finally, Different growth parameters (height, covering, fresh and dry matter yield) of the used grasses were clearly positive affected by wood compost, with the highest production inherent to the treatments treated by the high amount of wood compost. N2 - Entsprechend der Zielstellung wurden zunächst verschiedene Varianten der Kompostierung von Holzsubstanz getestet, um eine optimale Technologie, die auch für Entwicklungsländer realisierbar ist, herauszufinden. Hierzu sind in Pflanztöpfe Holzspäne (Woodchips) von zwei verschieden Holzarten (Laub- und Nadelholz) gefüllt und mit verschiedenen natürlichen Stickstoffquellen gemischt worden. Diese Ansätze wurden regelmäßig mit Kompostwasser appliziert. Nach vier Wochen sind zwei verschiedene Wurmarten (Dendrobaena veneta und Eisenia fetida) hinzugegeben worden. Die Feuchthaltung erfolgte ab diesem Zeitpunkt durch Frischwasser. Die qualitativ beste Versuchsvariante ist im nächsten Schritt mit weiteren natürlichen Stickstoffquellen, die in Entwicklungsländern zur Verfügung gestellt werden könnten, getestet worden. Von allen Kompostvarianten sind im Labor eine Vielzahl von bodenphysikalischen (z.B. Dichte, Wasserhaltekapazität) und bodenchemischen Zustandsgrößen (z.B. Elektrische Leitfähigkeit, Totalgehalte biophiler Elemente, Bodenreaktion, organische Substanzgehalte, Kationenaustauschkapazität) bestimmt worden. Die Wiederum qualitativ beste Mischung ist in einer weiteren Versuchsreihe in verschiedenen Mengenverhältnissen mit tertiärerem Abraumsand des Braunkohlebergbaus gemischt worden. In diese Versuchsmischungen wurde die Grasmischung RSM 7.2.1 eingesät und regelmäßig bewässert sowie die Wuchshöhe gemessen. Nach 42 Tagen wurden das Gras geerntet und die biometrischen Parameter, die Nährstoffgehalte (pflanzenverfügbare Fraktionen), die Bodenreaktion, die effektive bzw. potentielle Kationenaustauschkapazität sowie die Pufferkapazitäten der Mischsubstrate bestimmt. Die nächsten Versuchsvarianten sind als Feldversuche in der Niederlausitz durchgeführt worden. Für ihre Realisierung wurde als weiterer Zuschlagsstoff Arkadolith® zugemischt. Die Plotflächen sind sowohl auf Abraumsanden des Tertiärs als auch Quartärs angelegt worden. In jeweils eine Subvariante ist RSM 7.2.1, in die andere eine autochthone Grasmischung eingesät worden. Diese Experimente wurden nach 6 Monaten beendet, die Bestimmung aller Parameter erfolgte in gleicher Weise wie bei den Gewächshausversuchen. Auf Basis aller Versuchsreihen konnten die besten Kompostqualitäten und ihre optimalen Herstellungsvarianten ermittelt werden. Eine weitere Aufgabe war es zu untersuchen, wie im Vergleich zur Verbrennung von Holzmasse die CO2-Emission in die Atmosphäre durch Holzkompostierung verringert werden kann. Hierzu wurde während der verschiedenen Kompostierungsvarianten die CO2-Freisetzung gemessen. Im Vergleich dazu ist jeweils die gleiche Masse an Holzsubstanz verbrannt worden. Die Ergebnisse zeigten, dass im Vergleich zu der thermischen Verwertung von Holsubstanz die CO2-Emission bis zu 50 % verringert werden kann. Dem Boden kann darüber hinaus energiereiche organische Substanz zugeführt werden, die eine Entwicklung der Bodenorganismen ermöglicht. Ein weiteres Experiment zielte darauf ab, die Stabilität der Holzkomposte zu bestimmen. Darüber hinaus sollte untersucht werden, ob durch die Zufuhr von pyrogenem Kohlenstoff eine Vergrößerung der Stabilität zu erreichen ist. Diese Untersuchungen wurden mit Hilfe der Thermogravimetrie vorgenommen. Alle wichtigen Kompostierungsvarianten sind sowohl mit verschiedenen Zusatzmengen als auch ohne Zusatz von pyrogenem Kohlenstoff vermessen worden. Als Vergleichssubstanz diente der Oberboden eines Niedermoorgleys, der naturgemäß einen relativ hohen Anteil an organischer Substanz aufweist. Die Ergebnisse zeigten, dass im Bereich niedriger Temperaturen die Wasserbindung im Naturboden fester ist. In der Fraktion der oxidierbaren organischen Substanz, im mittleren Temperaturbereich gemessen, ist die natürliche Bodensubstanz ebenfalls stabiler, was auf eine intensivere Bindung zwischen den organischen und anorganischen Bestandteilen, also auf stabilere organisch-mineralische Komplexe, schlussfolgern lässt. Im Bereich höherer Temperaturen (T> 550° C) waren im Naturboden keine nennenswerten organischen Bestandteile mehr nachweisbar. Hingegen wiesen die Kompostvarianten einen hohen Anteil stabiler Fraktionen, vor allem aromatische Verbindungen, auf. Diese Aussagen erscheinen vor allem für die praktische Anwendung der Holzkomposte in Hinblick auf ihre Langzeitwirkung bedeutsam. Der Zusatz von pyrogenem Kohlenstoff zeigte keine zusätzliche Stabilisierungswirkung. T2 - Holzkompostverfahrenstechnik, Eigenschaften und ihre Auswirkungen auf die extremen Bodeneigenschaften KW - Holzkompost KW - Kohlendioxid KW - Eisenia fetida KW - Dendrobaena veneta KW - Kohlengrubenabraum KW - wood compost KW - carbon dioxide KW - Eisenia fetida KW - Dendrobaena veneta KW - coal mine waste Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-51046 ER -