TY - JOUR A1 - Ulbricht, Alexander A1 - Mohr, Gunther A1 - Altenburg, Simon J. A1 - Oster, Simon A1 - Maierhofer, Christiane A1 - Bruno, Giovanni T1 - Can potential defects in LPBF be healed from the laser exposure of subsequent layers? BT - A quantitative study JF - Metals : open access journal N2 - Additive manufacturing (AM) of metals and in particular laser powder bed fusion (LPBF) enables a degree of freedom in design unparalleled by conventional subtractive methods. To ensure that the designed precision is matched by the produced LPBF parts, a full understanding of the interaction between the laser and the feedstock powder is needed. It has been shown that the laser also melts subjacent layers of material underneath. This effect plays a key role when designing small cavities or overhanging structures, because, in these cases, the material underneath is feed-stock powder. In this study, we quantify the extension of the melt pool during laser illumination of powder layers and the defect spatial distribution in a cylindrical specimen. During the LPBF process, several layers were intentionally not exposed to the laser beam at various locations, while the build process was monitored by thermography and optical tomography. The cylinder was finally scanned by X-ray computed tomography (XCT). To correlate the positions of the unmolten layers in the part, a staircase was manufactured around the cylinder for easier registration. The results show that healing among layers occurs if a scan strategy is applied, where the orientation of the hatches is changed for each subsequent layer. They also show that small pores and surface roughness of solidified material below a thick layer of unmolten material (>200 mu m) serve as seeding points for larger voids. The orientation of the first two layers fully exposed after a thick layer of unmolten powder shapes the orientation of these voids, created by a lack of fusion. KW - selective laser melting (SLM) KW - additive manufacturing (AM) KW - process KW - monitoring KW - infrared thermography KW - optical tomography KW - X-ray computed KW - tomography (XCT) KW - healing KW - in situ monitoring Y1 - 2021 U6 - https://doi.org/10.3390/met11071012 SN - 2075-4701 VL - 11 IS - 7 PB - MDPI CY - Basel ER - TY - JOUR A1 - Rösch, Nicolas A1 - Tiberius, Victor A1 - Kraus, Sascha T1 - Design thinking for innovation BT - context factors, process, and outcomes JF - European journal of innovation management N2 - Purpose – Design thinking has become an omnipresent process to foster innovativeness in various fields. Due to its popularity in both practice and theory, the number of publications has been growing rapidly. The authors aim to develop a research framework that reflects the current state of research and allows for the identification of research gaps. Design/methodology/approach – The authors conduct a systematic literature review based on 164 scholarly articles on design thinking. Findings – This study proposes a framework, which identifies individual and organizational context factors, the stages of a typical design thinking process with its underlying principles and tools, and the individual as well as organizational outcomes of a design thinking project. Originality/value – Whereas previous reviews focused on particular aspects of design thinking, such as its characteristics, the organizational culture as a context factor or its role on new product development, the authors provide a holistic overview of the current state of research. KW - context factors KW - design thinking KW - outcomes KW - process KW - systematic literature review Y1 - 2023 U6 - https://doi.org/10.1108/EJIM-03-2022-0164 SN - 1460-1060 SN - 1758-7115 VL - 26 IS - 7 SP - 160 EP - 176 PB - Emerald CY - Bingley ER -