TY - JOUR A1 - Ullrich, André A1 - Vladova, Gergana A1 - Marquart, Danny A1 - Braun, Andreas A1 - Gronau, Norbert T1 - An overwiew of benefits and risks in open innovation projects and the influence of intermediary participation, decision-making authority, experience, and position on their perception JF - International journal of innovation management : IJIM N2 - This paper presents an exploratory study investigating the influence of the factors (1) intermediary participation, (2) decision-making authority, (3) position in the enterprise, and (4) experience in open innovation on the perception and assessment of the benefits and risks expected from participating in open innovation projects. For this purpose, an online survey was conducted in Germany, Austria and Switzerland. The result of this paper is an empirical evidence showing whether and how these factors affect the perception of potential benefits and risks expected within the context of open innovation project participation. Furthermore, the identified effects are discussed against the theory. Existing theory regarding the benefits and risks of open innovation is expanded by (1) finding that they are perceived mostly independently of the factors, (2) confirming the practical relevance of benefits and risks, and (3) enabling a finer distinction between their degrees of relevance according to respective contextual specifics. KW - Open innovation KW - intermediaries KW - benefits KW - decision-making KW - experience; KW - risks Y1 - 2022 U6 - https://doi.org/10.1142/S1363919622500128 SN - 1363-9196 SN - 1757-5877 VL - 26 IS - 02 PB - World Scientific Publ. CY - Singapore ER - TY - BOOK A1 - Gronau, Norbert T1 - Geschäftsprozessmanagement in Wirtschaft und Verwaltung N2 - Dieses Standardwerk zu Geschäftsprozessmanagement in Wirtschaft und Verwaltung gibt gleichzeitig einen Überblick über den aktuellen Stand der Forschung zu diesem Thema und führt Interessierte wie Studierende oder Praktiker in das Thema und seine Facetten ein. Aktuelle Entwicklungen wie Robotic Process Automation und Process Mining werden aufgegriffen. Im Mittelpunkt stehen die drei wesentlichen GPM- Blickwinkel Technik, Organisation und Mensch. Aus Sicht der Forschung werden innovative Methoden zur Modellierung und Analyse von Geschäftsprozessen beschrieben. Aus Sicht der Lehre dient das Buch als Einstiegslektüre und liefert Ansatzpunkte für die vertiefte Befassung mit einzelnen Aspekten des Geschäftsprozessmanagements. Für die Praxis beschreibt dieses Werk die dort bestehenden konzeptionellen und methodischen Hindernisse des Prozessmanagements und zeigt Wege zur Überwindung dieser Hindernisse. Die vorliegende Auflage wurde vollständig überarbeitet und stark erweitert, u. a. mit neuen Kapiteln zu Software für das Geschäftsprozessmanagement und zum Change Management. Y1 - 2022 UR - https://ebookcentral.proquest.com/lib/potsdamuni/detail.action?docID=7119120 SN - 978-3-95545-399-2 PB - Gito CY - Berlin ET - 3. Aufl. ER - TY - JOUR A1 - Grum, Marcus A1 - Sultanow, Eldar A1 - Friedmann, Daniel A1 - Ulrich, Andre A1 - Gronau, Norbert T1 - Tools des Maschinellen Lernens BT - Marktstudie, Anwendungsbereiche & Lösungen der Künstlichen Intelligenz N2 - Künstliche Intelligenz ist in aller Munde. Immer mehr Anwendungsbereiche werden durch die Auswertung von vorliegenden Daten mit Algorithmen und Frameworks z.B. des Maschinellen Lernens erschlossen. Dieses Buch hat das Ziel, einen Überblick über gegenwärtig vorhandene Lösungen zu geben und darüber hinaus konkrete Hilfestellung bei der Auswahl von Algorithmen oder Tools bei spezifischen Problemstellungen zu bieten. Um diesem Anspruch gerecht zu werden, wurden 90 Lösungen mittels einer systematischen Literaturrecherche und Praxissuche identifiziert sowie anschließend klassifiziert. Mit Hilfe dieses Buches gelingt es, schnell die notwendigen Grundlagen zu verstehen, gängige Anwendungsgebiete zu identifizieren und den Prozess zur Auswahl eines passenden ML-Tools für das eigene Projekt systematisch zu meistern. Y1 - 2021 SN - 978-3-95545-380-0 SN - 978-3-95545-318-7 U6 - https://doi.org/10.30844/grum_2020 PB - Gito CY - Berlin ER - TY - GEN A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Students’ Acceptance of Technology-Mediated Teaching – How It Was Influenced During the COVID-19 Pandemic in 2020: A Study From Germany T2 - Postprints der Universität Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe N2 - In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring–summer 2020 semester. Our study focused on (1) the students’ acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study’s results and derive short- and long-term implications for science and practice. T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 141 KW - COVID-19 KW - digital learning KW - discipline differences KW - e-learning KW - TAM KW - technology acceptance KW - technology-mediated teaching KW - university teaching Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-521615 SN - 1867-5808 ER - TY - JOUR A1 - Vladova, Gergana A1 - Ullrich, André A1 - Bender, Benedict A1 - Gronau, Norbert T1 - Students’ acceptance of technology-mediated teaching – How it was influenced during the COVID-19 Pandemic in 2020 BT - A study from Germany JF - Frontiers in psychology / Frontiers Research Foundation N2 - In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring–summer 2020 semester. Our study focused on (1) the students’ acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study’s results and derive short- and long-term implications for science and practice. KW - COVID-19 KW - digital learning KW - discipline differences KW - e-learning KW - TAM KW - technology acceptance KW - technology-mediated teaching KW - university teaching Y1 - 2020 U6 - https://doi.org/10.3389/fpsyg.2021.636086 SN - 1664-1078 VL - 12 PB - Frontiers Research Foundation CY - Lausanne ER - TY - JOUR A1 - Dragičević, Nikolina A1 - Ullrich, André A1 - Tsui, Eric A1 - Gronau, Norbert T1 - A conceptual model of knowledge dynamics in the industry 4.0 smart grid scenario JF - Knowledge management research & practice : KMRP N2 - Technological advancements are giving rise to the fourth industrial revolution - Industry 4.0 -characterized by the mass employment of smart objects in highly reconfigurable and thoroughly connected industrialproduct-service systems. The purpose of this paper is to propose a theory-based knowledgedynamics model in the smart grid scenario that would provide a holistic view on the knowledge-based interactions among smart objects, humans, and other actors as an underlyingmechanism of value co-creation in Industry 4.0. A multi-loop and three-layer - physical, virtual, and interface - model of knowledge dynamics is developedby building on the concept of ba - an enabling space for interactions and theemergence of knowledge. The model depicts how big data analytics are just one component inunlocking the value of big data, whereas the tacit engagement of humans-in-the-loop - theirsense-making and decision-making - is needed for insights to be evoked fromanalytics reports and customer needs to be met. KW - Industry 4.0 KW - tacit knowledge KW - humans-in-the-loop KW - big data analytics KW - internet of things and services KW - smart grid Y1 - 2020 U6 - https://doi.org/10.1080/14778238.2019.1633893 SN - 1477-8238 SN - 1477-8246 VL - 18 IS - 2 SP - 199 EP - 213 PB - Taylor & Francis CY - London [u.a.] ER - TY - BOOK A1 - Gronau, Norbert T1 - Knowledge Modeling and Description Language 3.0 BT - eine Einführung Y1 - 2020 SN - 978-3-95545-330-5 SN - 978-3-95545-357-2 PB - GITO CY - Berlin ER - TY - JOUR A1 - Lass, Sander A1 - Gronau, Norbert T1 - A factory operating system for extending existing factories to Industry 4.0 JF - Computers in industry : an international, application oriented research journal N2 - Cyber-physical systems (CPS) have shaped the discussion about Industry 4.0 (I4.0) for some time. To ensure the competitiveness of manufacturing enterprises the vision for the future figures out cyber-physical production systems (CPPS) as a core component of a modern factory. Adaptability and coping with complexity are (among others) potentials of this new generation of production management. The successful transformation of this theoretical construct into practical implementation can only take place with regard to the conditions characterizing the context of a factory. The subject of this contribution is a concept that takes up the brownfield character and describes a solution for extending existing (legacy) systems with CPS capabilities. KW - Factory operating system KW - CPPS KW - CPS KW - Decentralized production control KW - Industry 4.0 KW - retrofit Y1 - 2019 U6 - https://doi.org/10.1016/j.compind.2019.103128 SN - 0166-3615 SN - 1872-6194 VL - 115 PB - Elsevier CY - Amsterdam ER - TY - GEN A1 - Weber, Edzard A1 - Tiefenbacher, Anselm A1 - Gronau, Norbert T1 - Need for standardization and systematization of test data for job-shop scheduling T2 - Postprints der Universität Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe N2 - The development of new and better optimization and approximation methods for Job Shop Scheduling Problems (JSP) uses simulations to compare their performance. The test data required for this has an uncertain influence on the simulation results, because the feasable search space can be changed drastically by small variations of the initial problem model. Methods could benefit from this to varying degrees. This speaks in favor of defining standardized and reusable test data for JSP problem classes, which in turn requires a systematic describability of the test data in order to be able to compile problem adequate data sets. This article looks at the test data used for comparing methods by literature review. It also shows how and why the differences in test data have to be taken into account. From this, corresponding challenges are derived which the management of test data must face in the context of JSP research. Keywords T3 - Zweitveröffentlichungen der Universität Potsdam : Wirtschafts- und Sozialwissenschaftliche Reihe - 134 KW - job shop scheduling KW - JSP KW - social network analysis KW - method comparision Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-472229 SN - 1867-5808 IS - 134 ER - TY - JOUR A1 - Weber, Edzard A1 - Tiefenbacher, Anselm A1 - Gronau, Norbert T1 - Need for Standardization and Systematization of Test Data for Job-Shop Scheduling JF - Data N2 - The development of new and better optimization and approximation methods for Job Shop Scheduling Problems (JSP) uses simulations to compare their performance. The test data required for this has an uncertain influence on the simulation results, because the feasable search space can be changed drastically by small variations of the initial problem model. Methods could benefit from this to varying degrees. This speaks in favor of defining standardized and reusable test data for JSP problem classes, which in turn requires a systematic describability of the test data in order to be able to compile problem adequate data sets. This article looks at the test data used for comparing methods by literature review. It also shows how and why the differences in test data have to be taken into account. From this, corresponding challenges are derived which the management of test data must face in the context of JSP research. KW - job shop scheduling KW - JSP KW - social network analysis KW - method comparision Y1 - 2019 U6 - https://doi.org/10.3390/data4010032 SN - 2306-5729 VL - 4 IS - 1 PB - MDPI CY - Basel ER -