TY - JOUR A1 - Liu, Yue A1 - Gould, Oliver E. C. A1 - Rudolph, Tobias A1 - Fang, Liang A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Polymeric microcuboids programmable for temperature-memory JF - Macromolecular materials and engineering N2 - Microobjects with programmable mechanical functionality are highly desirable for the creation of flexible electronics, sensors, and microfluidic systems, where fabrication/programming and quantification methods are required to fully control and implement dynamic physical behavior. Here, programmable microcuboids with defined geometries are prepared by a template-based method from crosslinked poly[ethylene-co-(vinyl acetate)] elastomers. These microobjects could be programmed to exhibit a temperature-memory effect or a shape-memory polymer actuation capability. Switching temperaturesT(sw)during shape recovery of 55 +/- 2, 68 +/- 2, 80 +/- 2, and 86 +/- 2 degrees C are achieved by tuning programming temperatures to 55, 70, 85, and 100 degrees C, respectively. Actuation is achieved with a reversible strain of 2.9 +/- 0.2% to 6.7 +/- 0.1%, whereby greater compression ratios and higher separation temperatures induce a more pronounced actuation. Micro-geometry change is quantified using optical microscopy and atomic force microscopy. The realization and quantification of microparticles, capable of a tunable temperature responsive shape-change or reversible actuation, represent a key development in the creation of soft microscale devices for drug delivery or microrobotics. KW - actuation KW - atomic force microscopy KW - biomaterials KW - microparticles KW - shape-memory polymers Y1 - 2020 U6 - https://doi.org/10.1002/mame.202000333 SN - 1438-7492 SN - 1439-2054 VL - 305 IS - 10 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Liu, Yue T1 - Polymeric objects switchable between two shapes N2 - As the ongoing trend of developing smart materials that can reversibly switch geometry stimulated by environmental control addressed increasing attention in many research fields, especially for biomedical or soft robotic applications. Shape-memory polymers (SMPs), which can change shape, stiffness, size, and structure when exposed to an external stimulus, are intensively explored as encouraging material candidates for achieving multifunctionality, and for miniaturizing into micro-components to expand the applications. Besides, the geometrical design has gained growing attention for creating engineering applications, such as bi-stable mechanisms, and has the potential to be explored by implementing SMP for new functions. In this context, this thesis aimed to develop smart micro-/nano-objects based on SMP and explore new functions by geometrical design using SMP. Here, two types of stimuli-responsive objects capable of one-way temperature-memory effect (TME) or free-standing reversible actuation e.g., micro/nanofibers (i) and microcuboids (ii) at different aspects were explored. At first, it was hypothesized that the advanced atomic force microscopy (AFM) platform can be established to study individual polymeric micro-/nanofibers (i) in terms of incorporation and characterization of a reversible shape-memory actuation capability. Crystallizable material was chosen for preparing the fibers and the molecular alignment within the fibers among different diameters will influence the crystallization-induced elongation during cooling that determined the reversible effect. For the second type, microcuboids (ii), it was hypothesized that a programming and quantification approach can be developed to enable the realization and characterization of a one-way micro-TME and micro-shape-memory polymer actuation (SMPA) in microcuboids. The responsive temperature of one-way shape transformation can be tuned by programming temperature (Tp) and the separation temperature (Tsep) for post-programming can influence the actuation. Finally, a geometrical design with bi-stability was combined with SME to create new functions of shape actuation. It was hypothesized that the predicted bi-stable or mono-stable structures can be achieved with the aid of digital fabrication methods. Using shape-memory effect (SME), the alteration of bi-stable and mono-stable can initiate shape transformation with a larger magnitude and higher energy output. In the first part, the method to quantify the reversible SMPA of a single micro/nano crystallizable fiber with geometry change during the actuation was explored. Electrospinning was used to prepare poly (ε-caprolactone) (PCL) micro/nanofiber with different diameters, which were fixed by UV glue and crosslinked on the structured silicon wafer. Using AFM, the programming, as well as the observation of recovery and reversible displacement of the fiber, were performed by vertical three-point bending at the free suspended part. A plateau tip was chosen to achieve stable contact and longer working distance for performing larger deformation, enabling intensified reversible SMPA of single fibers. In this way, programming strains of 39 ± 1% or 46 ± 1% were realized for fiber with a diameter of 1 ± 0.2 µm and 300 ± 50 nm, which were bent at 80 °C and fixed at 10 °C. Values for the reversible elongation of εrev = 3.4 ± 0.1% and 10.5 ± 0.1% were obtained for a single micro and nanofiber respectively between 10 and 60 °C. The higher actuation effect observed for nanofiber demonstrated that the highly compact and oriented crystallites in nanofibers, which determined the pronounced εrev compared to the thick microfibers. Besides, a stable reversible actuation of a nanofiber can be tracked by AFM tip up to 10 cycles, indicating a sustainable application can be achieved on the fiber actuators. The findings obtained for cPCL micro-/nano-fibers will help design and evaluate the next generation polymeric microactuators or micromanipulators. The second part of the thesis studies the shape-memory effect (SME) of a single individual SMP micro-object by controlling deformation temperatures during programming and actuation temperatures during reversible change. In this work, microcuboids of crosslinked poly[ethylene-co-(vinyl acetate)] (cPEVA) elastomers with 18 wt% vinyl acetate (VA) contents were successfully prepared by template-based replication from polydimethylsiloxane (PDMS) mold. The micro-TME and micro-SMPA were observed and studied based on micro-geometry change using optical microscopy (OM) and AFM. Different switching temperatures of shape recovery were achieved from 55 °C to 86 °C by tuning Tp from 55 °C to 100 °C, indicating a successful implementation of micro-TME on individual microcuboid. For micro-SMPA functionalization, microcuboids were deformed by compression at 100 °C and the change in single particle height was monitored during cyclic heating and cooling between various Tseps from 60 °C to 85 °C and 20 °C. The micro-SMPA on a single microcuboid was achieved with a reversible strain in the range of 2 to 7%, whereby higher compression ratio CR and Tsep induced prominent reversible strain. The results achieved in this work demonstrated the successful functionalization of microcuboids with different SMEs by controlling temperatures during programming and actuation processes. Based on these achievements, such micro-objects can be further designed as on demand switchable microactuators or release systems with adjustable working temperatures. In the last part of the work, a new function of shape-memory polymeric bi-stable 3D structured film was designed and fabricated. The SME and geometrical design of compliant mechanics were merged to enable switching between bi-stable and mono-stable states, which generate snap movement that mimics the Venus flytrap. A truncated tetrahedron structure with a slope angle as a tunable parameter to alter the bi-stability was chosen for the study to combine with SME. It was anticipated that the structured film designed with a slope angle of 30° exhibited mono-stable behavior, and such a structure with a slope angle of 45° exhibited bi-stable behavior. Then the structured SMP film of designed mono-stable shape was successfully fabricated using soft lithography based on 3D printed master molds supported from digital manufacturing. The structured mold was also used in programming the SMP film into the structure with a higher slope angle to attain bi-stability. Finally, the switching between bi-stable and mono-stable states was successfully realized using SME, which introduces snapping movement triggered by heat. The implementation of compliant mechanisms by the SME increased the magnitude of thermally induced reconfiguration without additional external force. To sum up, the results of the thesis support the development of smart objects capable of one-way micro-TME, free-standing reversible actuation, or bi-stability mediated shape-memory reconfiguration. Electrospinning and template-based method were used for fabrication with good control of geometry and low size dispersity. Microscopy methods especially the AFM platform with decent sensitivity was developed for implementation as well as characterization of SME on individual micro-/nanoobjects. Implementation of bi-stability improves the shape transformation amplitude of thermally triggered SMP. These findings can give novel insights for designing polymer-based actuators or soft robotics. KW - shape-memory polymer KW - compliant mechanism KW - atomic force microscopy Y1 - 2021 ER - TY - JOUR A1 - Fang, Liang A1 - Gould, Oliver E. C. A1 - Lysyakova, Liudmila A1 - Jiang, Yi A1 - Sauter, Tilman A1 - Frank, Oliver A1 - Becker, Tino A1 - Schossig, Michael A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Implementing and quantifying the shape-memory effect of single polymeric micro/nanowires with an atomic force microscope JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The implementation of shape-memory effects (SME) in polymeric micro- or nano-objects currently relies on the application of indirect macroscopic manipulation techniques, for example, stretchable molds or phantoms, to ensembles of small objects. Here, we introduce a method capable of the controlled manipulation and SME quantification of individual micro- and nano-objects in analogy to macroscopic thermomechanical test procedures. An atomic force microscope was utilized to address individual electro-spun poly(ether urethane) (PEU) micro- or nanowires freely suspended between two micropillars on a micro-structured silicon substrate. In this way, programming strains of 10 +/- 1% or 21 +/- 1% were realized, which could be successfully fixed. An almost complete restoration of the original free-suspended shape during heating confirmed the excellent shape-memory performance of the PEU wires. Apparent recovery stresses of sigma(max,app)=1.2 +/- 0.1 and 33.3 +/- 0.1MPa were obtained for a single microwire and nanowire, respectively. The universal AFM test platform described here enables the implementation and quantification of a thermomechanically induced function for individual polymeric micro- and nanosystems. KW - cyclic thermomechanical testing KW - atomic force microscopy KW - soft matter micro- and nanowires KW - shape-memory effect KW - materials science Y1 - 2018 U6 - https://doi.org/10.1002/cphc.201701362 SN - 1439-4235 SN - 1439-7641 VL - 19 IS - 16 SP - 2078 EP - 2084 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Novakovic, Lazar T1 - Investigating DEFECTIVE KERNEL 1 regulation of primary cell wall biosynthesis and mechanical properties during plant growth in Arabidopsis thaliana N2 - Plants possess cell wall, a polysaccharide exoskeleton which encompasses all plant cells. Cell wall gives plant cells mechanical support, defines their shape, enables growth and water transport through a plant. It also has important role in communication with the external environment. Regulation of plant cell wall biosynthesis and cell and organ morphogenesis depends on cell’s ability to detect mechanical signals originating both from the external environment and from internal plant tissues. Thanks to the presence of the cell wall, all living plant cells develop constant internal pressure generated by the active water uptake, known as turgor pressure, which enables them to grow. Thus, actively growing cells in the tissue are exerting mechanical stress to each other. In order to properly coordinate cell growth, tissue morphogenesis and maintain cell-to-cell adhesion, plant cell have to detect these mechanical signals. That is performed by a group of still not well enough characterized plant mechanosensitive proteins. Mechanosensors are proteins capable of detecting changes in mechanical stress patterns and translating them into physiological and developmental outputs. One of plant mechanosensitive proteins, DEFECTIVE KERNEL1 (DEK1) has shown to be a very important in proper plant development. DEK1 bears similarity with animal cysteine proteases of Calpain superfamily. DEK1 is very important for plant development since all null alleles are embryo lethal. During the last 20 years of DEK1 studies, this protein has proven to be a very difficult for different molecular and biochemical manipulations. As a consequence, very little is known about its direct target proteins. Wang and co-workers (2003) and Johnson and co-workers (2008) have given a valuable contribution to biochemical understanding of DEK1 by determining that it functions as Cys-protease in similar way as animal calpains. However, a lot of indirect knowledge was gathered about the effects of disruption and modulation of DEK1 activity. DEK1 is important for proper organ development, epidermal specification, and maintenance. However, some studies have inferred that DEK1 affects expression of different cell wall related genes, and it regulates cell-to-cell adhesion in epidermal cells. This led to two extensive studies (Amanda et al., 2016, 2017) which demonstrated importance of DEK1 in regulation leaf epidermal cell walls in A. thaliana mature leaves and inflorescence stems. These studies demonstrated that DEK1 also influences cell wall thickness and cell-to-cell adhesion and that it could potentially regulate cell growth and expansion. Building up on this research, we decided to try to further characterize molecular and biomechanical aspects of DEK1 mediated cell wall regulation, with special emphasis on regulation of cellulose synthesis. We used two mutant lines, with modulated DEK1 activity, a constitutive overexpressor for DEK1 CALPAIN domain and a point mutant in CALPAIN domain, dek1-4. In Chapter 3 we demonstrated that DEK1 regulates dynamics of Cellulose Synthase Complexes (CSCs). Both lines showed decreased crystalline cellulose contents. This led us to investigate if velocity of CSCs in cotyledons, was affected, since it is known that changes in cellulose contents are often caused by defects in CSC. We found that bothDEK1 modulated lines we used have significantly decreased velocity of CSCs. We have also examined plasma membrane turnover rates of CSCs and found out that after photo-bleaching OE CALPAIN has much faster recovery rates compared to Col-0 wild type, while dek1-4 has lower exocytotic rates of CSCs, and much longer life-time of CSCs inserted into the plasma membrane. These results suggested that DEK1 regulates different aspects of CSC dynamics, possibly through interaction with different regulatory proteins. Decrease in cellulose contents we observed in DEK1 modulated lines, prompted us to investigate how this reflects biomechanics and structural properties of epidermal cotyledon cell walls of DEK1 modulated lines, which is described in Chapter 4. To achieve this, we developed a novel microdissection method for isolation and mechanical and structural characterization of native epidermal cell wall monolayers using atomic force microscopy (AFM). AFM force spectroscopy assays showed that both DEK1 modulated lines had stiffer cell walls compared to Col-0. This was awkward since we initially detected decrease in crystalline cellulose which implied decrease in cell wall stiffness. However, subsequent high-resolution AFM imaging has revealed that DEK1 modulate lines cells walls have their cellulose microfibrils organized in thicker bundles than Col-0. Also, polysaccharide composition analysis has revealed that DEK1 modulated lines have increased abundance of pectins, which could also be responsible for the observed increase in cell wall stiffness. Previous work has shown that different dek1 mutants and modulated lines have defects in cell-to-cell adhesion. This implied that DEK1 may be involved in sensing and/or maintaining cell wall integrity (CWI). We performed several growth assays to determine role of DEK1 in CWI, which is described in Chapter 5. We performed cellulose synthesis perturbation assays with cellulose synthesis inhibitor Isoxaben and obtained very interesting results. While OE CALPAIN plants were hypersensitive to Isoxaben, dek1-4 has shown complete insensitivity. Furthermore, a regular CWI maintenance response, reported in A. thaliana as result of compromised CWI, ectopic lignification in seedlings’ roots was absent in both DEK1 modulated lines we examined. We detected interesting growth response of DEK1 lines to NaCl and mannitol treatments as well. Although these findings are pointing out that DEK1 could be part of CWI signalling pathways, more experiments are necessary to fully elucidate possible role of DEK1 in CWI sensing and/or maintenance pathways, especially to check if DEK1 is interacting with Catharanthus roseus Receptor Like Kinase group of CWI sensors. Studies on 4-month old short day grown DEK1 modulated lines, have shown defects in branching, with development of fasciated stem branches in a DEK1 modulated line overexpressing CALPAIN domain (Amanda et al., 2017). This result pointed out to a possibility that DEK1 may regulate organ morphogenesis and patterning at the level of shoot apical meristem (SAM). Work towards elucidating role of DEK1 in SAM maintenance and organ patterning is detailed in Chapter 6. We determined that OE CALPAIN had significantly larger central zone of SAM as well as larger individual SAM cells in central zone, as well as higher distribution of cell sizes, implying possible cell expansion defects. dek1-4 did not exhibited changes in SAM central zone size or individual stem cell size, but it seemed that it had increased number of stem cells in SAM central zone. Both DEK1 lines had perturbation of phyllotaxis on SAM level, with disturbed divergence angles between floral primordia. Disturbed phyllotaxis was also observed between siliques, in mature plants. In addition to this, OE CALPAIN has exhibited occurrence of multiple (up to four) siliques growing from a single stem node. All this is pointing out that DEK1 might participate in hormone-signalling in the SAM.. DEK1 is a highly intriguing protein. However, since it is a unigene, and in addition to that, a regulatory protease, it probably participates in multiple signalling pathways, which makes understanding its function much more complicated. KW - DEK1 KW - atomic force microscopy KW - cellulose microfibrils KW - shoot apical meristem KW - phyllotaxis KW - biomechanics KW - cellulose synthase complex KW - cell wall Y1 - 2021 ER - TY - GEN A1 - Bald, Ilko A1 - Keller, Adrian T1 - Molecular processes studied at a single-molecule level using DNA origami nanostructures and atomic force microscopy T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - DNA origami nanostructures allow for the arrangement of different functionalities such as proteins, specific DNA structures, nanoparticles, and various chemical modifications with unprecedented precision. The arranged functional entities can be visualized by atomic force microscopy (AFM) which enables the study of molecular processes at a single-molecular level. Examples comprise the investigation of chemical reactions, electron-induced bond breaking, enzymatic binding and cleavage events, and conformational transitions in DNA. In this paper, we provide an overview of the advances achieved in the field of single-molecule investigations by applying atomic force microscopy to functionalized DNA origami substrates. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1146 KW - DNA origami KW - atomic force microscopy KW - single-molecule analysis KW - DNA radiation damage KW - protein binding KW - enzyme reactions KW - G quadruplexes Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-475843 SN - 1866-8372 IS - 9 SP - 13803 EP - 13823 ER - TY - JOUR A1 - Kielar, Charlotte A1 - Xin, Yang A1 - Xu, Xiaodan A1 - Zhu, Siqi A1 - Gorin, Nelli A1 - Grundmeier, Guido A1 - Möser, Christin A1 - Smith, David M. A1 - Keller, Adrian T1 - Effect of staple age on DNA origami nanostructure assembly and stability JF - Molecules N2 - DNA origami nanostructures are widely employed in various areas of fundamental and applied research. Due to the tremendous success of the DNA origami technique in the academic field, considerable efforts currently aim at the translation of this technology from a laboratory setting to real-world applications, such as nanoelectronics, drug delivery, and biosensing. While many of these real-world applications rely on an intact DNA origami shape, they often also subject the DNA origami nanostructures to rather harsh and potentially damaging environmental and processing conditions. Furthermore, in the context of DNA origami mass production, the long-term storage of DNA origami nanostructures or their pre-assembled components also becomes an issue of high relevance, especially regarding the possible negative effects on DNA origami structural integrity. Thus, we investigated the effect of staple age on the self-assembly and stability of DNA origami nanostructures using atomic force microscopy. Different harsh processing conditions were simulated by applying different sample preparation protocols. Our results show that staple solutions may be stored at -20 degrees C for several years without impeding DNA origami self-assembly. Depending on DNA origami shape and superstructure, however, staple age may have negative effects on DNA origami stability under harsh treatment conditions. Mass spectrometry analysis of the aged staple mixtures revealed no signs of staple fragmentation. We, therefore, attribute the increased DNA origami sensitivity toward environmental conditions to an accumulation of damaged nucleobases, which undergo weaker base-pairing interactions and thus lead to reduced duplex stability. KW - DNA origami KW - atomic force microscopy KW - stability KW - storage Y1 - 2019 U6 - https://doi.org/10.3390/molecules24142577 SN - 1420-3049 VL - 24 IS - 14 PB - MDPI CY - Basel ER - TY - JOUR A1 - Matkovic, Aleksandar A1 - Vasic, Borislav A1 - Pesic, Jelena A1 - Prinz, Julia A1 - Bald, Ilko A1 - Milosavljevic, Aleksandar R. A1 - Gajic, Rados T1 - Enhanced structural stability of DNA origami nanostructures by graphene encapsulation JF - NEW JOURNAL OF PHYSICS N2 - We demonstrate that a single-layer graphene replicates the shape of DNA origami nanostructures very well. It can be employed as a protective layer for the enhancement of structural stability of DNA origami nanostructures. Using the AFM based manipulation, we show that the normal force required to damage graphene encapsulated DNA origami nanostructures is over an order of magnitude greater than for the unprotected ones. In addition, we show that graphene encapsulation offers protection to the DNA origami nanostructures against prolonged exposure to deionized water, and multiple immersions. Through these results we demonstrate that graphene encapsulated DNA origami nanostructures are strong enough to sustain various solution phase processing, lithography and transfer steps, thus extending the limits of DNA-mediated bottom-up fabrication. KW - graphene KW - DNA origami nanostructures KW - atomic force microscopy Y1 - 2016 U6 - https://doi.org/10.1088/1367-2630/18/2/025016 SN - 1367-2630 VL - 18 PB - IOP Publ. Ltd. CY - Bristol ER - TY - THES A1 - Roder, Phillip T1 - Kombination von Fluoreszenzmikroskopie und Rasterkraftmikroskopie zur Aufklärung physiologischer Prozesse in lebenden Zellen T1 - Combination of fluorescence microscopy and atomic force microscopy for the investigation of physiological processes in living cells BT - Charakterisierung und Anwendung einer neuartigen lokalen Mikromanipulationstechnik BT - characterisation and application of a novel local micromanipulation technique N2 - Innerhalb dieser Doktorarbeit wurde eine neuartige Mikromanipulationstechnik für die lokale Flüssigkeitsabgabe am komplexen Drüsengewebe der Schabe P. americana charakterisiert und für die damit verbundene gezielte Manipulation von einzelnen Zellen in einem Zellkomplex (Gewebe) angewandt. Bei dieser Mikromanipulationstechnik handelt es sich um die seit 2009 bekannte nanofluidische Rasterkraftmikroskopie (FluidFM = fluidic force microscopy). Dabei werden sehr kleine mikrokanälige Rasterkraftspitzen bzw. Mikro-/Nanopipetten mit einer Öffnung zwischen 300 nm und 2 µm verwendet, mit denen es möglich ist, sehr kleine Volumina im Pikoliter- bis Femtoliter-Bereich (10-12 L – 10-15 L) gezielt und ortsgenau abzugeben. Das Ziel dieser Arbeit war die Analyse zellulärer Prozesse, wie z. B. Zell-Zell-Kommunikation oder Signalweiterleitung, zwischen benachbarten Zellen unter Zuhilfenahme der Fluoreszenzmikroskopie. Mit dieser Methode können die Zellen und ihre Bestandteile mittels vorheriger Farbstoffbeladung unter einem Mikroskop mit hohem Kontrast optisch dargestellt werden. Mit Hilfe der Fluoreszenzmikroskopie sollten schlussendlich die zellulären Reaktionen innerhalb des Gewebes nach der lokalen Manipulation visualisiert werden. Zunächst wurde die Anwendung des Systems an Luft und wässriger Umgebung beschrieben. In diesem Zusammenhang wurde eine Reinigungs- und Beladungsmethode entwickelt, mit der es möglich war, die kostspieligen Mikro-/Nanopipetten zu reinigen und anschließend mehrmals wiederzuverwenden. Hierzu wurde eine alternative Methode getestet, mit der das Diffusionsverhalten von Farbstoffmolekülen in unterschiedlichen Medien untersucht werden kann. Des Weiteren wurden die Systemparameter optimiert, welche nötig sind, um zwischen der Probenoberfläche und der Pipette einen guten Pipettenöffnungs-abschluss zu erhalten. Dieser Abschluss ist essentiell, damit die abgegebene Flüssigkeit ausschließlich in der Abgaberegion mit der Probe wechselwirkt und die darauffolgenden Reaktionen nur innerhalb des Gewebes erfolgen, da ansonsten die Zell-Zell-Signalweiterleitung zwischen den Zellen nicht eindeutig nachvollzogen werden kann. Diese interzelluläre Kommunikation wurde anhand zweier sekundärer Botenstoffe (Ca2+ und NO) untersucht. Hierbei war es möglich einzelne lokale Reaktionen zu detektieren, welche sich über weitere Zellen ausbreiteten. Schlussendlich wurde die Fertigung einer speziellen Injektionspipette beschrieben, welche an zwei biologischen Systemen getestet wurde. N2 - Within this thesis, a novel micromanipulation technique was characterised for the local liquid delivery at the complex salivary glands tissue of the cockroach P. americana and was applied for the associated targeted manipulation of single cells in a cell complex (tissue). This micromanipulation technique is known since 2009 as the fluidic force microscopy (FluidFM) technique. In this case, very small microchanneled AFM tips or rather micro-/nanopipettes with an opening between 300 nm and 2 μm are used to deliver very small volumes in the picoliter to femtoliter range (10-12 L - 10-15 L) targeted and accurate. The aim of this work was the analysis of cellular processes, such as cell-cell communication or signal transduction, between adjacent cells using fluorescence microscopy. Using this method, the cells and their components can be optically visualised by prior dye loading under a microscope with high contrast. Using fluorescence microscopy, the cellular responses within the tissue were finally visualised after local manipulation. First, the application of the system in air and aqueous environment was described. In this context, a cleaning and loading method was developed which allows the cleaning and the repeated reuse of the expensive micro-/nanopipettes. For this purpose, an alternative method has been tested, with which the diffusion of dye molecules in different media can be examined. Furthermore, the system parameters needed to obtain a good pipette opening sealing between the sample surface and the pipette have been optimised. This sealing is essential to ensure that the delivered liquid interacts only with the sample in the delivery region and that subsequent reactions occur only within the tissue, otherwise cell-cell signaling between the cells can not be clearly understood. This intercellular communication was studied by means of two secondary messengers (Ca2+ and NO). Here it was possible to detect individual local reactions that spread over more cells. Finally, the production of a special injection pipette was described, which was tested on two biological systems. KW - Rasterkraftmikroskopie KW - Fluoreszenzmikroskopie KW - Mikromanipulation KW - Zellgewebe KW - Diffusion KW - atomic force microscopy KW - fluorescence microscopy KW - micromanipulation KW - cellular tissue KW - diffusion Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-419806 ER - TY - JOUR A1 - Bald, Ilko A1 - Keller, Adrian T1 - Molecular processes studied at a single-molecule level using DNA origami nanostructures and atomic force microscopy JF - Molecules N2 - DNA origami nanostructures allow for the arrangement of different functionalities such as proteins, specific DNA structures, nanoparticles, and various chemical modifications with unprecedented precision. The arranged functional entities can be visualized by atomic force microscopy (AFM) which enables the study of molecular processes at a single-molecular level. Examples comprise the investigation of chemical reactions, electron-induced bond breaking, enzymatic binding and cleavage events, and conformational transitions in DNA. In this paper, we provide an overview of the advances achieved in the field of single-molecule investigations by applying atomic force microscopy to functionalized DNA origami substrates. KW - DNA origami KW - atomic force microscopy KW - single-molecule analysis KW - DNA radiation damage KW - protein binding KW - enzyme reactions KW - G quadruplexes Y1 - 2014 U6 - https://doi.org/10.3390/molecules190913803 SN - 1420-3049 VL - 19 IS - 9 SP - 13803 EP - 13823 PB - MDPI CY - Basel ER - TY - THES A1 - Elsner, Nils T1 - Nanomechanik und Adhäsion von Polyelektrolytmultischicht-Hohlkapseln T1 - Nanomechanics and adhesion of polyelectrolyte multilayer hollow capsules N2 - Die vorliegende Arbeit beschäftigte sich mit zwei Themengebieten. Es ging zum einen um die mechanischen Eigenschaften von Polyelektrolythohlkapseln und zum anderen um die Adhäsion von Polyelektrolythohlkapseln. Die mechanischen Eigenschaften wurden mit der AFM „colloidal probe” Technik untersucht. Dabei zeigte sich, dass die Kraftdeformationskurven für kleine Deformationen den nach der Schalentheorie vorhergesagten linearen Verlauf haben. Ebenso wurde die quadratische Abhängigkeit der Federkonstanten von der Dicke bestätigt. Für PAH/PSS findet man einen E-Modul von 0.25 GPa. Zusammen mit der Tatsache, dass die Deformationskurven unabhängig von der Geschwindigkeit sind und praktisch keine Hysterese zeigen, sowie der Möglichkeit die Kapseln plastisch zu deformieren, kann man schließen, dass das System in einem glasartigen Zustand vorliegt. Erwartungsgemäß zeigte der pH einen starken Einfluss auf die PEM. Während in einem pH-Bereich zwischen 2 und 11.5 keine morphologischen Änderungen festgestellt werden konnten, vergrößerte sich der Radius bei pH = 12 um bis zu 50 %. Diese Radienänderung war reversibel und ging einher mit einem sichtbaren Weicherwerden der Kapseln. Eine Abnahme des E-Moduls um mindestens drei Größenordungen wurde durch Kraftdeformationsmessungen bestätigt. Die Kraftdeformationskurven zeigen eine starke Hysterese. Das System befindet sich nun nicht mehr in einem glasartigen Zustand, sondern ist viskos bis gummiartig geworden. Messungen an Kapseln, die mit Glutardialdehyd behandelt wurden, zeigten, dass die Behandlung das pH-abhängige Verhalten verändert. Dies kann darauf zurückgeführt werden, dass das PAH durch den Glutardialdehyd quervernetzt wird. Bei einem hohen Quervernetzungsgrad, zeigen die Kapseln keine Änderung des mechanischen Verhaltens bei pH = 12. Schwach quervernetzte Kapseln werden immer noch signifikant weicher bei pH = 12, jedoch ändert sich der Radius nicht. Außerdem wurden Multilagenkapseln untersucht, deren Stabilität nicht auf elektrostatischen Wechselwirkungen sondern auf Wasserstoffbrückenbindungen beruhte. Diese Kapseln zeigten eine deutlich höhere Steifigkeit mit E-Modulen bis zu 1 GPa. Es wurde gefunden, dass auch dieses System für kleine Deformationen ein lineares Kraft-Deformationsverhalten zeigt, und dass die Federkonstante quadratisch von der Dicke abhängt. Die Kapseln lösen sich praktisch sofort bei pH = 6.5 auf. In der Nähe dieses pHs konnte das Abnehmen der Federkonstanten verfolgt werden. Außerdem wurde das Adhäsionsverhalten von PAH/PSS Kapseln auf mit PEI-beschichtetem Glas untersucht. Die Adhäsionsflächen waren zu einem großen Teil rund und ließen sich quantitativ auswerten. Der Adhäsionsradius nimmt mit dem Kapselradius zu und mit der Dicke ab. Das Verhalten konnte mit zwei Modellen, einem für die große und einem für die kleine Deformation beschrieben werden. Das große Deformationsmodell liefert um eine Größenordung niedrigere Adhäsionsenergien als das kleine Deformationsmodell, welches mit Werten von ‑0.2 mJ/m2 Werte in einem plausiblen Bereich liefert. Es wurde gefunden, dass bei einem Verhältnis von Dicke zu Deformation von etwa eins "buckling" auftritt. Dieser Punkt markierte zugleich den Übergang von der großen zur kleinen Deformation. N2 - This work had two objectives. The first was to study the mechanical properties of polyelectrolyte hollow capsules depending on the pH and the wall composition utilizing the AFM colloidal probe technique. The second objective was to study the adhesion of these capsules varying the radius and thickness. It was found that the AFM colloidal probe technique can be utilized to measure the shells spring constant. The acquired deformation curves for small deformations showed the linear force deformation relation predicted by the shell theory. The stiffness of capsules composed of polyallylamine and polystyrenesulfonate scales quadratically with the thickness giving Young’s modulus of 0.25 GPa. Changing the pH had no effect concerning the morphology and the elastic properties of the afore mentioned capsules up to pH = 11.5. At pH = 12 the capsules’ radius increased between 30 % and 50 % and the elastic modulus decreased by more than one order of magnitude. This pH-change can be viewed as the glass transition of the material, being in a glassy state below pH = 11.5 and becoming rubbery at pH = 12. Introducing crosslinking into the capsule wall inhibited any morphological changes at pH = 12, while leaving the capsule stiffness sensitive for small degrees of crosslinking. It was possible to prove the quadratic thickness dependency of the stiffness for a system where the internal forces keeping together the multilayer were hydrogen bonds (poly(methacrylic acid) / poly-4-vinylpyrrolidone). These apsules are significantly stiffer than the afore mentioned ones (Young’s modulus 0.6 to 1 GPa) and show a strong reaction towards increasing the pH by dissolving within seconds. Close to the dissolution pH these capsules also exhibit a transition from a glassy to a rubbery state. Capsules composed of polyallylamine / polystyrene sulfonate adhered to polyethylene imine coated glass. The radius of the adhesion disc increased with the radius of the capsule and decreased with increasing thickness. This behaviour could be semi quantitatively described with a strong and a weak deformation model giving a value for the adhesion energy of ‑0.02 mJ/m2 for the small deformation model. At deformations of the order of the thickness, the theoretically predicted buckling was observed. KW - Polyelektrolyt KW - Mehrschichtsystem KW - Mikroskopie KW - Kraftmikroskopie KW - Mechanische Eigenschaft KW - Adhäsion KW - Wasserstoffionenkonzentration KW - polyelectrolyte multilayer KW - microscopy KW - atomic force microscopy KW - mechanical properties KW - adhesion Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5555 ER -