TY - JOUR A1 - Stojanović, Ivan A1 - Židov, Bruno A1 - Travkova, Oksana A1 - Grigoriev, Dmitry T1 - Enhanced protective performance of waterborne, microcontainers-doped coatings in harsh environments JF - Progress in organic coatings : an international journal N2 - In this study, the corrosion inhibitors Zinc oleate and 8-Hydroxyquinoline were successfully encapsulated using an interfacial polyaddition method. As such they were dispersed at different concentrations within the waterborne coating matrix. The resulting composite coatings were applied to the low carbon steel substrates. Successful synthesis and morphological characteristics of microcontainers loaded with inhibitors were confirmed using various characterization techniques. Scanning electron microscopy, dynamic light scattering, and thermogravimetric measurements are techniques used to define the surface, dimensional, and dispersive characteristics of containers, and the share of encapsulated inhibitors. The release study defined the discharge kinetics of the corrosion inhibitor from the microcontainers dispersed freely in an aqueous medium. Electrochemical impedance spectroscopy was used to determine the anticorrosive performance of the samples continuously exposed to various corrosive environments of salt and humidity chambers and NaCl solution. Special emphasis was placed on adhesion testing and visual observations during the exposure period. Significant improvements have been noted in terms of corrosion resistance, which, however, depend on the type of inhibitor used, the concentration of the containers embedded in the coating matrix and on the characteristics of the corrosive environment. KW - Self-protecting coatings KW - Interfacial polyaddition KW - Inhibitor loaded KW - microcontainers KW - Corrosion inhibitors Y1 - 2021 U6 - https://doi.org/10.1016/j.porgcoat.2021.106273 SN - 0300-9440 SN - 1873-331X VL - 157 PB - Elsevier Science CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Gahlaut, Shashank K. A1 - Pathak, Anisha A1 - Gupta, Banshi D. T1 - Recent advances in silver nanostructured substrates for plasmonic sensors JF - Biosensors : open access journal N2 - Noble metal nanostructures are known to confine photon energies to their dimensions with resonant oscillations of their conduction electrons, leading to the ultrahigh enhancement of electromagnetic fields in numerous spectroscopic methods. Of all the possible plasmonic nanomaterials, silver offers the most intriguing properties, such as best field enhancements and tunable resonances in visible-to-near infrared regions. This review highlights the recent developments in silver nanostructured substrates for plasmonic sensing with the main emphasis on surface plasmon resonance (SPR) and surface-enhanced Raman spectroscopy (SERS) over the past decade. The main focus is on the synthesis of silver nanostructured substrates via physical vapor deposition and chemical synthesis routes and their applications in each sensing regime. A comprehensive review of recent literature on various possible silver nanostructures prepared through these methodologies is discussed and critically reviewed for various planar and optical fiber-based substrates. KW - silver KW - plasmonics KW - sensors KW - surface-enhanced Raman spectroscopy KW - surface-enhanced fluorescence KW - surface-enhanced infrared spectroscopy Y1 - 2022 U6 - https://doi.org/10.3390/bios12090713 SN - 2079-6374 VL - 12 IS - 9 PB - MDPI CY - Basel ER - TY - JOUR A1 - Diehn, Sabrina Maria A1 - Schlaad, Helmut A1 - Kneipp, Janina T1 - Multivariate imaging for fast evaluation of in situ dark field microscopy hyperspectral data JF - Molecules : a journal of synthetic chemistry and natural product chemistry N2 - Dark field scattering microscopy can create large hyperspectral data sets that contain a wealth of information on the properties and the molecular environment of noble metal nanoparticles. For a quick screening of samples of microscopic dimensions that contain many different types of plasmonic nanostructures, we propose a multivariate analysis of data sets of thousands to several hundreds of thousands of scattering spectra. By using non-negative matrix factorization for decomposing the spectra, components are identified that represent individual plasmon resonances and relative contributions of these resonances to particular microscopic focal volumes in the mapping data sets. Using data from silver and gold nanoparticles in the presence of different molecules, including gold nanoparticle-protein agglomerates or silver nanoparticles forming aggregates in the presence of acrylamide, plasmonic properties are observed that differ from those of the original nanoparticles. For the case of acrylamide, we show that the plasmon resonances of the silver nanoparticles are ideally suited to support surface enhanced Raman scattering (SERS) and the two-photon excited process of surface enhanced hyper Raman scattering (SEHRS). Both vibrational tools give complementary information on the in situ formed polyacrylamide and the molecular composition at the nanoparticle surface. KW - localized surface plasmon resonances KW - gold nanoparticles KW - silver nanoparticles KW - dark field microscopy KW - acrylamide KW - hyperspectral imaging KW - non-negative matrix factorization KW - surface-enhanced Raman scattering (SERS) KW - surface-enhanced hyper Raman scattering (SEHRS) Y1 - 2022 U6 - https://doi.org/10.3390/molecules27165146 SN - 1420-3049 VL - 27 IS - 16 PB - MDPI CY - Basel ER - TY - JOUR A1 - Tarazona, Natalia A. A1 - Wei, Ren A1 - Brott, Stefan A1 - Pfaff, Lara A1 - Bornscheuer, Uwe T. A1 - Lendlein, Andreas A1 - Machatschek, Rainhard T1 - Rapid depolymerization of poly(ethylene terephthalate) thin films by a dual-enzyme system and its impact on material properties JF - Chem Catalysis N2 - Enzymatic hydrolysis holds great promise for plastic waste recycling and upcycling. The interfacial catalysis mode, and the variability of polymer specimen properties under different degradation conditions, add to the complexity and difficulty of understanding polymer cleavage and engineering better biocatalysts. We present a systemic approach to studying the enzyme-catalyzed surface erosion of poly(ethylene terephthalate) (PET) while monitoring/controlling operating conditions in real time with simultaneous detection of mass loss and changes in viscoelastic behavior. PET nanofilms placed on water showed a porous morphology and a thicknessdependent glass transition temperature (T-g) between 40 degrees C and 44 degrees C, which is >20 degrees C lower than the T-g of bulk amorphous PET. Hydrolysis by a dual-enzyme system containing thermostabilized variants of Ideonella sakaiensis PETase and MHETase resulted in a maximum depolymerization of 70% in 1 h at 50 degrees C. We demonstrate that increased accessible surface area, amorphization, and T-g reduction speed up PET degradation while simultaneously lowering the threshold for degradation-induced crystallization. Y1 - 2022 U6 - https://doi.org/10.1016/j.checat.2022.11.004 SN - 2667-1093 SN - 2667-1107 VL - 2 IS - 12 SP - 3573 EP - 3589 PB - Cell Press CY - Cambridge ER - TY - JOUR A1 - Rothe, Martin A1 - Zhao, Yuhang A1 - Halim, Henry A1 - Lu, Yan A1 - Benson, Oliver T1 - Spatial mapping of bleaching in a metal-organic plasmon converter JF - Optics continuum N2 - Hybrid nanophotonic elements, fabricated by organic and inorganic materials, are going to be key components of modern devices. Coupled systems of photoemitters with a plasmonic waveguide serve the demand for nanoscopic frequency converters. However, processes like the degradation of the photoemitters via photobleaching occur and need to be monitored and controlled, to realize future successful devices. We introduce a hybrid perylene-diimide / silver nanowire as plasmon frequency converter. A versatile method is presented to monitor and analyze the bleaching process. It is based on a time series of photoluminescence images, during the operation of a single converter. An analytical model is applied on the data and unveils that the photobleaching rate is constant and independent of the operation of the plasmon converter. Y1 - 2022 U6 - https://doi.org/10.1364/OPTCON.454911 SN - 2770-0208 VL - 1 IS - 8 SP - 1730 EP - 1740 PB - Optica Publishing Group CY - Washington ER - TY - JOUR A1 - Chemura, Sitshengisiwe A1 - Schrumpf, Tim A1 - Günter, Christina A1 - Kumke, Michael Uwe T1 - Ceria nanomaterials containing ytterbium BT - low and high concentration – luminescence analyzed in the near infrared region JF - RSC Advances : an international journal to further the chemical sciences N2 - Lanthanide based ceria nanomaterials are important practical materials due to the redox properties that are useful in the avenues pertaining to technology and life sciences. Sub 10 nm spherical and highly monodisperse Ce1−xYbxO2−y (0.04 ≤ x ≤ 0.22) nanoparticles were synthesized by thermal decomposition, annealed separately at 773 K and 1273 K for 2 hours and characterized. Elemental mapping for Yb3+ doped ceria nanoparticles shows homogeneous distribution of Yb3+ atoms in the ceria with low Yb3+ content annealed at 773 K and 1273 K for 2 hours. However, clusters are observed for 773 K annealed ceria samples with high concentration of Yb3+. These clusters are not detected in 1273 K annealed nanomaterials. Introducing small amounts of Yb3+ ions into the ceria lattice as spectroscopic probes can provide detailed information about the atomic structure and local environments allowing the monitoring of small structural changes, such as clustering. The emission spectra observed at room temperature and at 4 K have a manifold of bands that corresponds to the 2F5/2 → 2F7/2 transition of Yb3+ ions. Some small shifts are observed in the Stark splitting pattern depending on the sample and the annealing conditions. The deconvolution by PARAFAC analysis yielded luminescence decay kinetics as well as the associated luminescence spectra of three species for each of the low Yb3+ doped ceria samples annealed at 773 K and one species for the 1273 K annealed samples. However, the ceria samples with high concentration of Yb3+ annealed at the two temperatures showed only one species with lower decay times as compared to the low Yb3+ doped ceria samples. Y1 - 2023 U6 - https://doi.org/10.1039/D3RA06868D SN - 2046-2069 VL - 13 IS - 50 SP - 35445 EP - 35456 PB - RSC Publishing CY - London ER - TY - JOUR A1 - Lehnen, Anne-Catherine A1 - Kurki, Jan A. M. A1 - Hartlieb, Matthias T1 - The difference between photo-iniferter and conventional RAFT polymerization BT - high livingness enables the straightforward synthesis of multiblock copolymers JF - Polymer Chemistry N2 - Photo-iniferter (PI)-RAFT polymerization, the direct activation of chain transfer agents via light, is a fascinating polymerization technique, as it overcomes some restriction of conventional RAFT polymerization. As such, we elucidated the role of reversible deactivation in this context using a monomer-CTA pair with low chain transfer capabilities. Tests with varying targeted degrees of polymerization (DP) or monomer concentrations revealed no significant improvement of polymerization control using the PI-process. Control can however be achieved via slow monomer addition, increasing the number of activation/deactivation events per monomer addition. More importantly, the livingness of the polymerization was found to be extraordinarily high, enabling the straightforward and rapid synthesis of multiblock copolymers with up to 20 blocks and a high number of repeating units per block (DP = 25-100) maintaining an overall excellent definition (M-n = 90 300 g mol(-1), D = 1.29). This study highlights the enormous potential of PI-RAFT polymerization for the synthesis of polymeric materials. Y1 - 2022 U6 - https://doi.org/10.1039/d1py01530c SN - 1759-9954 SN - 1759-9962 VL - 13 IS - 11 SP - 1537 EP - 1546 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Hermanns, Jolanda A1 - Kunold, Helen T1 - Mechanism comics as a task in a written exam in organic chemistry for pre-service chemistry teachers JF - Chemistry teacher international : best practices in chemistry education N2 - In this paper, we describe and evaluate a study on the use of mechanism comics for writing solutions to a task in a written exam for the course "Organic Chemistry I for Pre-Service Chemistry Teachers." The students had to design a reaction mechanism for a reaction that was unknown to them and write captions explaining every step of their reaction mechanism. The students' work was evaluated using the method of qualitative content analysis in four rounds by both authors. The majority of the captions were coded as "descriptive" and only a minority as "causal." This means that the students mostly described "what" happened, but seldom "why" this happened. Implicit electron movement was also described more often than explicit electron movement. The majority of the captions were technically correct. In summary, the students were capable of designing and describing a reaction mechanism for a previously unknown reaction. The quality of their reasoning could be improved, however. In the new course, the quality of students' mechanistic reasoning and then especially their explanations of "why" mechanistic steps occur will be given much clearer emphasis. KW - concepts KW - mechanistic reasoning KW - organic chemistry KW - pre-service chemistry teachers KW - writing-to-learn Y1 - 2022 U6 - https://doi.org/10.1515/cti-2021-0035 SN - 2569-3263 VL - 4 IS - 3 SP - 259 EP - 269 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Titov, Evgenii T1 - Effect of conformational disorder on exciton states of an azobenzene aggregate JF - Physical chemistry, chemical physics : a journal of European Chemical Societies N2 - Azobenzene is a prototypical molecular photoswitch, widely used to trigger a variety of transformations at different length scales. In systems like self-assembled monolayers or micelles, azobenzene chromophores may interact with each other, which gives rise to the emergence of exciton states. Here, using first-principles calculations, we investigate how conformational disorder (induced, e.g., by thermal fluctuations) affects localization of these states, on an example of an H-type azobenzene tetramer. We find that conformational disorder leads to (partial) exciton localization on a single-geometry level, whereas ensemble-averaging results in a delocalized picture. The pi pi* and n pi* excitons at high and low temperatures are discussed. Y1 - 2022 U6 - https://doi.org/10.1039/d2cp02774g SN - 1463-9076 SN - 1463-9084 VL - 24 IS - 39 SP - 24002 EP - 24006 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Sand, Patrick A1 - Schmidt, Bernd T1 - Orthogonal arylation of a diene-sulfonamide using cationic transition metal catalysts JF - European journal of organic chemistry N2 - The regioselectivity of two mechanistically distinct alkenylation reactions catalyzed by in situ-formed cationic transition metal complexes was studied using N-allyl-N-phenylethenesulfonamide as a model compound. Orthogonal selectivity was observed for the Ru-catalyzed C-H-activating alkenylation with acetanilides, which occurs preferentially at the electron deficient double bond, and for a Pd-catalyzed Heck-type coupling with arene diazonium salts, which occurs preferentially at the more electron rich double bond of the N-allyl substituent. KW - arenes KW - C-H activation KW - palladium KW - ruthenium KW - sulfonamides Y1 - 2022 U6 - https://doi.org/10.1002/ejoc.202201336 SN - 1434-193X SN - 1099-0690 VL - 2022 IS - 47 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Prüfert, Christian A1 - Beitz, Toralf A1 - Reich, Olaf A1 - Löhmannsröben, Hans-Gerd T1 - Inline process analysis of copper-bearing aerosols using laser-induced breakdown spectroscopy, laser-induced incandescence and optical imaging JF - Spectrochimica acta, Part B, Atomic spectroscopy N2 - The quantification and identification of aerosols in industry plays a key role in process monitoring and control and lays the foundation for process automation aspired by the industry 4.0 initiative. However, measuring particulate matter's mass and number concentrations in harsh environments poses great analytical constraints. The presented approach comprises a comprehensive set of light-and imaging-based techniques, all contactless, in-line, and real-time. It includes, but is not limited to, stroboscopic imaging, laser-induced breakdown spectroscopy (LIBS) and laser-induced incandescence (LII). Stroboscopic imaging confirmed the particles sphericity and was used to measure the particle number density. A phase-selective LIBS setup with low fluence and 500 Hz repetition rate was used to classify each particle with a single-pulse and in real time. Simultaneously, the created plasma was captured by CCD imaging to determine the detection volume and hit rate of the LIBS setup. Both data sets combined were converted to a particle number density, which was consistent with the particle number density of the stroboscopic measurements. Furthermore, using a photodiode and microphone in parallel to the LIBS setup allowed for the photoacoustic normalization of the spectral line intensity at the laser repetition rate of 500 Hz. This was done as a partial photoacoustic normalization method with the cut-off based on the coefficient of variation (CV), reducing it by 25%. Aside from that photodiode and microphone were proven to be valuable event counting with the advantage of the less spatially constricted. A second laser setup was used for laser -induced incandescence (LII) making it possible to classify the particles based on their incandescence tendency. Given its larger probing volume, LII could be employed at very low particle number densities. With respect to the current literature, this is the first approach of using LII as an in-line, real-time analytical technique for the compositional classification of metal-bearing aerosols. KW - LIBS KW - LII KW - aerosol. photoacoustics KW - stroboscopic imaging KW - minerals Y1 - 2022 U6 - https://doi.org/10.1016/j.sab.2022.106527 SN - 0584-8547 SN - 1873-3565 VL - 197 PB - Elsevier CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Wessig, Pablo A1 - Badetko, Dominik A1 - Koebe, Michael T1 - Triplet sensitized Photo-Dehydro-Diels-Alder reaction JF - ChemistrySelect N2 - We report on the triplet sensitization of the intramolecular Photo-Dehydro-Diels-Alder (PDDA) reaction of two diaryl suberates bearing methyl propiolate chromophors. Compared with the non-sensitized irradiation, considerably increased yields could be observed. Moreover, it is possible to use the more efficient UVA lamps instead of UVB lamps. Among three investigated sensitizers (xanthone, benzophenone, thioxanthone) xanthone gave the best results. KW - light sources KW - photochemistry KW - photodehydro-Diels-Alder reaction KW - triplet sensitization Y1 - 2022 U6 - https://doi.org/10.1002/slct.202202648 SN - 2365-6549 VL - 7 IS - 38 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Ebel, Kenny A1 - Bald, Ilko T1 - Low-energy (5-20 eV) electron-induced single and double strand breaks in well-defined DNA sequences JF - Journal of physical chemistry letters N2 - Ionizing radiation is used in cancer radiation therapy to effectively damage the DNA of tumors. The main damage is due to generation of highly reactive secondary species such as low-energy electrons (LEEs). The accurate quantification of DNA radiation damage of well-defined DNA target sequences in terms of absolute cross sections for LEE-induced DNA strand breaks is possible by the DNA origami technique; however, to date, it is possible only for DNA single strands. In the present work DNA double strand breaks in the DNA sequence 5 '-d(CAC)4/5 ' d(GTG)4 are compared with DNA single strand breaks in the oligonucleotides 5 '-d(CAC)4 and 5 '-d(GTG)4 upon irradiation with LEEs in the energy range from 5 to 20 eV. A maximum of strand break cross section was found around 7 and 10 eV independent of the DNA sequence, indicating that dissociative electron attachment is the underlying mechanism of strand breakage and confirming previous studies using plasmid DNA. Y1 - 2022 U6 - https://doi.org/10.1021/acs.jpclett.2c00684 SN - 1948-7185 VL - 13 IS - 22 SP - 4871 EP - 4876 PB - American Chemical Society CY - Washington, DC ER - TY - THES A1 - Martin, Johannes T1 - Synthesis of protein-polymer conjugates and block copolymers via sortase-mediated ligation N2 - In den vergangenen Jahrzehnten haben therapeutische Proteine in der pharmazeutischen Industrie mehr und mehr an Bedeutung gewonnen. Werden Proteine nichtmenschlichen Ursprungs verwendet, kann es jedoch zu einer Immunreaktion kommen, sodass das Protein sehr schnell aus dem Körper ausgeschieden oder abgebaut wird. Um die Zirkulationszeit im Blut signifikant zu verlängern, werden die Proteine mit synthetischen Polymeren modifiziert (Protein-Polymer-Konjugate). Die Proteine aller heute auf dem Markt erhältlichen Medikamente dieser Art tragen eine oder mehrere Polymerketten aus Poly(ethylenglycol) (PEG). Ein Nachteil der PEGylierung ist, dass viele Patienten bei regelmäßiger Einnahme dieser Medikamente Antikörper gegen PEG entwickeln, die den effizienzsteigernden Effekt der PEGylierung wieder aufheben. Ein weiterer Nachteil der PEGylierung ist die oftmals deutlich verringerte Aktivität der Konjugate im Vergleich zum nativen Protein. Der Grund dafür ist die Herstellungsmethode der Konjugate, bei der meist die primären Amine der Lysin-Seitenketten und der N-Terminus des Proteins genutzt werden. Da die meisten Proteine mehrere gut zugängliche Lysine aufweisen, werden oft unterschiedliche und teilweise mehrere Lysine mit PEG funktionalisiert, was zu einer Mischung an Regioisomeren führt. Je nach Position der PEG-Kette kann das aktive Zentrum abgeschirmt oder die 3D-Struktur des Proteins verändert werden, was zu einem teilweise drastischen Aktivitätsabfall führt. In dieser Arbeit wurde eine neuartige Methode zur Ligation von Makromolekülen untersucht. Die Verwendung eines Enzyms als Katalysator zur Verbindung zweier Makromoleküle ist bisher wenig untersucht und ineffizient. Als Enzym wurde Sortase A ausgewählt, eine gut untersuchte Ligase aus der Familie der Transpeptidasen, welche die Ligation zweier Peptide katalysieren kann. Ein Nachteil dieser Sortase-vermittelten Ligation ist, dass es sich um eine Gleichgewichtsreaktion handelt, wodurch hohe Ausbeuten schwierig zu erreichen sind. Im Rahmen dieser Dissertation wurden zwei zuvor entwickelte Methoden zur Verschiebung des Gleichgewichts ohne Einsatz eines großen Überschusses von einem Edukt für Makromoleküle überprüft. Zur Durchführung der Sortase-vermittelten Ligation werden zwei komplementäre Peptidsequenzen verwendet, die Erkennungssequenz und das Nukleophil. Um eine systematische Untersuchung durchführen zu können, wurden alle nötigen Bausteine (Protein-Erkennungssequenz zur Reaktion mit Nukleophil-Polymer und Polymer-Erkennungssequenz mit Nukleophil-Protein) hergestellt. Als Polymerisationstechnik wurde die radikalische Polymerisation mit reversibler Deaktivierung (im Detail, Atom Transfer Radical Polymerization, ATRP und Reversible Addition-Fragmentation Chain Transfer, RAFT polymerization) gewählt, um eine enge Molmassenverteilung zu erreichen. Die Herstellung der Bausteine begann mit der Synthese der Peptide via automatisierter Festphasen-Peptidsynthese, um eine einfache Änderung der Peptidsequenz zu gewährleisten und um eine Modifizierung der Polymerkette nach der Polymerisation zu umgehen. Um die benötigte unterschiedliche Funktionalität der zwei Peptidsequenzen (freier C-Terminus bei der Erkennungssequenz bzw. freier N-Terminus bei dem Nukleophil) zu erreichen, wurden verschiedene Linker zwischen Harz und Peptid verwendet. Danach wurde der Kettenüberträger (chain transfer agent, CTA) zur Kontrolle der Polymerisation mit dem auf dem Harz befindlichen Peptid gekoppelt. Die für die anschließende Polymerisation verwendeten Monomere basierten auf Acrylamiden und Acrylaten und wurden anhand ihrer Eignung als Alternativen zu PEG ausgewählt. Es wurde eine kürzlich entwickelte Technik basierend auf der RAFT-Polymerisation (xanthate-supported photo-iniferter RAFT, XPI-RAFT) verwendet um eine Reihe an Peptid-Polymeren mit unterschiedlichen Molekulargewichten und engen Molekulargewichtsverteilungen herzustellen. Nach Entfernung der Schutzgruppen der Peptid-Seitenketten wurden die Peptid-Polymere zunächst genutzt, um mittels Sortase-vermittelter Ligation zwei Polymerketten zu einem Blockcopolymer zu verbinden. Unter Verwendung von Ni2+-Ionen in Kombination mit einer Verlängerung der Erkennungssequenz um ein Histidin zur Unterdrückung der Rückreaktion konnte ein maximaler Umsatz von 70 % erreicht werden. Dabei zeigte sich ein oberes Limit von durchschnittlich 100 Wiederholungseinheiten; die Ligation von längeren Polymeren war nicht erfolgreich. Danach wurden ein Modellprotein und ein Nanobody mit vielversprechenden medizinischen Eigenschaften mit den für die enzymkatalysierte Ligation benötigten Peptidsequenzen für die Kopplung mit den zuvor hergestellten Peptid-Polymeren verwendet. Dabei konnte bei Verwendung des Modellproteins keine Bildung von Protein-Polymer-Konjugaten beobachtet werden. Der Nanobody konnte dagegen C-terminal mit einem Polymer funktionalisiert werden. Dabei wurde eine ähnliche Limitierung in der Polymer-Kettenlänge beobachtet wie zuvor. Die auf Ni-Ionen basierte Strategie zur Gleichgewichtsverschiebung hatte hier keinen ausschlaggebenden Effekt, während die Verwendung von einem Überschuss an Polymer zur vollständigen Umsetzung des Edukt-Nanobody führte. Die erhaltenen Daten aus diesem Projekt bilden eine gute Basis für weitere Forschung in dem vielversprechenden Feld der enzymkatalysierten Herstellung von Protein-Polymer-Konjugaten und Blockcopolymeren. Langfristig könnte diese Herangehensweise eine vielseitig einsetzbare Herstellungsmethode von ortsspezifischen therapeutischen Protein-Polymer Konjugaten darstellen, welche sowohl eine hohe Aktivität als auch eine lange Zirkulationszeit im Blut aufweisen. N2 - During the last decades, therapeutical proteins have risen to great significance in the pharmaceutical industry. As non-human proteins that are introduced into the human body cause a distinct immune system reaction that triggers their rapid clearance, most newly approved protein pharmaceuticals are shielded by modification with synthetic polymers to significantly improve their blood circulation time. All such clinically approved protein-polymer conjugates contain polyethylene glycol (PEG) and its conjugation is denoted as PEGylation. However, many patients develop anti-PEG antibodies which cause a rapid clearance of PEGylated molecules upon repeated administration. Therefore, the search for alternative polymers that can replace PEG in therapeutic applications has become important. In addition, although the blood circulation time is significantly prolonged, the therapeutic activity of some conjugates is decreased compared to the unmodified protein. The reason is that these conjugates are formed by the traditional conjugation method that addresses the protein's lysine side chains. As proteins have many solvent exposed lysines, this results in a somewhat uncontrolled attachment of polymer chains, leading to a mixture of regioisomers, with some of them eventually affecting the therapeutic performance. This thesis investigates a novel method for ligating macromolecules in a site-specific manner, using enzymatic catalysis. Sortase A is used as the enzyme: It is a well-studied transpeptidase which is able to catalyze the intermolecular ligation of two peptides. This process is commonly referred to as sortase-mediated ligation (SML). SML constitutes an equilibrium reaction, which limits product yield. Two previously reported methods to overcome this major limitation were tested with polymers without using an excessive amount of one reactant. Specific C- or N-terminal peptide sequences (recognition sequence and nucleophile) as part of the protein are required for SML. The complementary peptide was located at the polymer chain end. Grafting-to was used to avoid damaging the protein during polymerization. To be able to investigate all possible combinations (protein-recognition sequence and nucleophile-protein as well as polymer-recognition sequence and nucleophile-polymer) all necessary building blocks were synthesized. Polymerization via reversible deactivation radical polymerization (RDRP) was used to achieve a narrow molecular weight distribution of the polymers, which is required for therapeutic use. The synthesis of the polymeric building blocks was started by synthesizing the peptide via automated solid-phase peptide synthesis (SPPS) to avoid post-polymerization attachment and to enable easy adaptation of changes in the peptide sequence. To account for the different functionalities (free N- or C-terminus) required for SML, different linker molecules between resin and peptide were used. To facilitate purification, the chain transfer agent (CTA) for reversible addition-fragmentation chain-transfer (RAFT) polymerization was coupled to the resin-immobilized recognition sequence peptide. The acrylamide and acrylate-based monomers used in this thesis were chosen for their potential to replace PEG. Following that, surface-initiated (SI) ATRP and RAFT polymerization were attempted, but failed. As a result, the newly developed method of xanthate-supported photo-iniferter (XPI) RAFT polymerization in solution was used successfully to obtain a library of various peptide-polymer conjugates with different chain lengths and narrow molar mass distributions. After peptide side chain deprotection, these constructs were used first to ligate two polymers via SML, which was successful but revealed a limit in polymer chain length (max. 100 repeat units). When utilizing equimolar amounts of reactants, the use of Ni2+ ions in combination with a histidine after the recognition sequence to remove the cleaved peptide from the equilibrium maximized product formation with conversions of up to 70 %. Finally, a model protein and a nanobody with promising properties for therapeutical use were biotechnologically modified to contain the peptide sequences required for SML. Using the model protein for C- or N-terminal SML with various polymers did not result in protein-polymer conjugates. The reason is most likely the lack of accessibility of the protein termini to the enzyme. Using the nanobody for C-terminal SML, on the other hand, was successful. However, a similar polymer chain length limit was observed as in polymer-polymer SML. Furthermore, in case of the synthesis of protein-polymer conjugates, it was more effective to shift the SML equilibrium by using an excess of polymer than by employing the Ni2+ ion strategy. Overall, the experimental data from this work provides a good foundation for future research in this promising field; however, more research is required to fully understand the potential and limitations of using SML for protein-polymer synthesis. In future, the method explored in this dissertation could prove to be a very versatile pathway to obtain therapeutic protein-polymer conjugates that exhibit high activities and long blood circulation times. KW - biohybrid molecules KW - sortaseA KW - polymerization KW - RAFT KW - ATRP KW - peptide synthesis KW - enzymatic conjugation KW - sortagging Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-645669 ER - TY - CHAP A1 - Wang, Zhenyu A1 - Breternitz, Joachim A1 - Schorr, Susan T1 - Cation disorder in zinc-group IV- nitride and oxide nitride semiconductor materials revealed through neutron diffraction T2 - Acta crystallographica / International Union of Crystallography. Section A, Foundations and advances KW - nitride materials KW - semiconductors KW - structure-property relationships Y1 - 2021 U6 - https://doi.org/10.1107/S0108767321086256 SN - 2053-2733 VL - 77 IS - Suppl. SP - C1077 EP - C1077 PB - Blackwell CY - Oxford [u.a.] ER - TY - JOUR A1 - Erler, Alexander A1 - Riebe, Daniel A1 - Beitz, Toralf A1 - Löhmannsröben, Hans-Gerd A1 - Leenen, Mathias A1 - Pätzold, Stefan A1 - Ostermann, Markus A1 - Wójcik, Michał T1 - Mobile laser-induced breakdown spectroscopy for future application in precision agriculture BT - a case study JF - Sensors N2 - In precision agriculture, the estimation of soil parameters via sensors and the creation of nutrient maps are a prerequisite for farmers to take targeted measures such as spatially resolved fertilization. In this work, 68 soil samples uniformly distributed over a field near Bonn are investigated using laser-induced breakdown spectroscopy (LIBS). These investigations include the determination of the total contents of macro- and micronutrients as well as further soil parameters such as soil pH, soil organic matter (SOM) content, and soil texture. The applied LIBS instruments are a handheld and a platform spectrometer, which potentially allows for the single-point measurement and scanning of whole fields, respectively. Their results are compared with a high-resolution lab spectrometer. The prediction of soil parameters was based on multivariate methods. Different feature selection methods and regression methods like PLS, PCR, SVM, Lasso, and Gaussian processes were tested and compared. While good predictions were obtained for Ca, Mg, P, Mn, Cu, and silt content, excellent predictions were obtained for K, Fe, and clay content. The comparison of the three different spectrometers showed that although the lab spectrometer gives the best results, measurements with both field spectrometers also yield good results. This allows for a method transfer to the in-field measurements. KW - LIBS KW - precision agriculture KW - soil KW - multivariate methods KW - feature selection Y1 - 2023 U6 - https://doi.org/10.3390/s23167178 SN - 1424-8220 VL - 23 IS - 16 PB - MDPI CY - Basel ER - TY - JOUR A1 - Adesina, Morenike O. A1 - Block, Inga A1 - Günter, Christina A1 - Unuabonah, Emmanuel Iyayi A1 - Taubert, Andreas T1 - Efficient Removal of Tetracycline and Bisphenol A from Water with a New Hybrid Clay/TiO2 Composite JF - ACS Omega N2 - New TiO2 hybrid composites were prepared fromkaolinclay, predried and carbonized biomass, and titanium tetraisopropoxideand explored for tetracycline (TET) and bisphenol A (BPA) removalfrom water. Overall, the removal rate is 84% for TET and 51% for BPA.The maximum adsorption capacities (q (m))are 30 and 23 mg/g for TET and BPA, respectively. These capacitiesare far greater than those obtained for unmodified TiO2. Increasing the ionic strength of the solution does not change theadsorption capacity of the adsorbent. pH changes only slightly changeBPA adsorption, while a pH > 7 significantly reduces the adsorptionof TET on the material. The Brouers-Sotolongo fractal modelbest describes the kinetic data for both TET and BPA adsorption, predictingthat the adsorption process occurs via a complex mechanism involvingvarious forces of attraction. Temkin and Freundlich isotherms, whichbest fit the equilibrium adsorption data for TET and BPA, respectively,suggest that adsorption sites are heterogeneous in nature. Overall,the composite materials are much more effective for TET removal fromaqueous solution than for BPA. This phenomenon is assigned to a differencein the TET/adsorbent interactions vs the BPA/adsorbent interactions:the decisive factor appears to be favorable electrostatic interactionsfor TET yielding a more effective TET removal. Y1 - 2023 U6 - https://doi.org/10.1021/acsomega.3c00184 SN - 2470-1343 VL - 8 IS - 24 SP - 21594 EP - 21604 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Mazarei, Elham A1 - Penschke, Christopher A1 - Saalfrank, Peter T1 - Band gap engineering in two-dimensional materials by functionalization BT - Methylation of graphene and graphene bilayers JF - ACS Omega N2 - Graphene is well-knownfor its unique combination of electricaland mechanical properties. However, its vanishing band gap limitsthe use of graphene in microelectronics. Covalent functionalizationof graphene has been a common approach to address this critical issueand introduce a band gap. In this Article, we systematically analyzethe functionalization of single-layer graphene (SLG) and bilayer graphene(BLG) with methyl (CH3) using periodic density functionaltheory (DFT) at the PBE+D3 level of theory. We also include a comparisonof methylated single-layer and bilayer graphene, as well as a discussionof different methylation options (radicalic, cationic, and anionic).For SLG, methyl coverages ranging from 1/8 to 1/1, (i.e.,the fully methylated analogue of graphane) are considered. We findthat up to a coverage theta of 1/2, graphene readily accepts CH3, with neighbor CH3 groups preferring trans positions. Above theta = 1/2, the tendency to accept further CH3 weakens and the lattice constant increases. The band gapbehaves less regularly, but overall it increases with increasing methylcoverage. Thus, methylated graphene shows potential for developingband gap-tuned microelectronics devices and may offer further functionalizationoptions. To guide in the interpretation of methylation experiments,vibrational signatures of various species are characterized by normal-modeanalysis (NMA), their vibrational density of states (VDOS), and infrared(IR) spectra, the latter two are obtained from ab initio moleculardynamics (AIMD) in combination with a velocity-velocity autocorrelationfunction (VVAF) approach. KW - Adsorption KW - Alkyls KW - Band structure KW - Electrical conductivity KW - Two dimensional materials Y1 - 2023 U6 - https://doi.org/10.1021/acsomega.3c02068 SN - 2470-1343 VL - 8 IS - 24 SP - 22026 EP - 22041 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kleinpeter, Erich A1 - Koch, Andreas T1 - The multiple bond character of the carbon-boron bond in boron trapped N-heterocyclic carbenes (NHCs) and cyclic(alkyl)(amino) carbenes (CAACs) on the magnetic criterion JF - Tetrahedron N2 - Geometry, 11B, 13C chemical shifts and the spatial magnetic properties (Through-Space NMR Shieldings -TSNMRS) of both cations and anions of boron-trapped N-heterocyclic carbenes (NHCs) and cyclic (alkyl)(amino)carbenes (CAACs) and of the corresponding diborane/diborene/diboryne dis-carbene adducts have been calculated using the GIAO perturbation method employing the nucleus independent chemical shift (NICS) concept; the TSNMRS results are visualized as iso-chemical-shielding surfaces (ICSS) of various size and direction. The ICSS of the TSNMRS (actually the anisotropy effects measurable in 1H NMR spectroscopy) are employed to qualify and quantify the present multiple bond character of the Carbene-Boron bond in the trapped NHCs and CAACs. Results are confirmed by bond length and 11B/13C chemical shift variations. Thus the partial multiple bond character of the Carbene-Boron bond cannot be expressed by the arrow of weak, much longer dative bonds and should be omitted as in other covalent lone pair-it or triel bonds. & COPY; 2023 Elsevier Ltd. All rights reserved. KW - NHCs KW - CAACs KW - Multiple NHC(CAAC)-Boron bonds KW - Through -space NMR KW - shieldings (TSNMRS) KW - NICS KW - Anisotropy effect KW - Ring current effect Y1 - 2023 U6 - https://doi.org/10.1016/j.tet.2023.133469 SN - 0040-4020 SN - 1464-5416 VL - 140 PB - Elsevier CY - Oxford ER - TY - JOUR A1 - Schlappa, Stephanie A1 - Bressel, Lena A1 - Reich, Oliver A1 - Münzberg, Marvin T1 - Advanced particle size analysis in high-solid-content polymer dispersions using photon density wave spectroscopy JF - Polymers N2 - High-solid-content polystyrene and polyvinyl acetate dispersions of polymer particles with a 50 nm to 500 nm mean particle diameter and 12-55% (w/w) solid content have been produced via emulsion polymerization and characterized regarding their optical and physical properties. Both systems have been analyzed with common particle-size-measuring techniques like dynamic light scattering (DLS) and static light scattering (SLS) and compared to inline particle size distribution (PSD) measurements via photon density wave (PDW) spectroscopy in undiluted samples. It is shown that particle size measurements of undiluted polystyrene dispersions are in good agreement between analysis methods. However, for polyvinyl acetate particles, size determination is challenging due to bound water in the produced polymer. For the first time, water-swelling factors were determined via an iterative approach of PDW spectroscopy error (X-2) minimization. It is shown that water-swollen particles can be analyzed in high-solid-content solutions and their physical properties can be assumed to determine the refractive index, density, and volume fraction in dispersion. It was found that assumed water swelling improved the reduced scattering coefficient fit by PDW spectroscopy by up to ten times and particle size determination was refined and enabled. Particle size analysis of the water-swollen particles agreed well with offline-based state-of-the-art techniques. KW - emulsion polymerization KW - multiple light scattering KW - photon density wave KW - spectroscopy KW - particle sizing KW - swelling of polymers Y1 - 2023 U6 - https://doi.org/10.3390/polym15153181 SN - 2073-4360 VL - 15 IS - 15 PB - MDPI CY - Basel ER - TY - JOUR A1 - Xu, Yaolin A1 - Dong, Kang A1 - Jie, Yulin A1 - Adelhelm, Philipp A1 - Chen, Yawei A1 - Xu, Liang A1 - Yu, Peiping A1 - Kim, Junghwa A1 - Kochovski, Zdravko A1 - Yu, Zhilong A1 - Li, Wanxia A1 - LeBeau, James A1 - Shao-Horn, Yang A1 - Cao, Ruiguo A1 - Jiao, Shuhong A1 - Cheng, Tao A1 - Manke, Ingo A1 - Lu, Yan T1 - Promoting mechanistic understanding of lithium deposition and solid-electrolyte interphase (SEI) formation using advanced characterization and simulation methods: recent progress, limitations, and future perspectives JF - Avanced energy materials N2 - In recent years, due to its great promise in boosting the energy density of lithium batteries for future energy storage, research on the Li metal anode, as an alternative to the graphite anode in Li-ion batteries, has gained significant momentum. However, the practical use of Li metal anodes has been plagued by unstable Li (re)deposition and poor cyclability. Although tremendous efforts have been devoted to the stabilization of Li metal anodes, the mechanisms of electrochemical (re-)deposition/dissolution of Li and solid-electrolyte-interphase (SEI) formation remain elusive. This article highlights the recent mechanistic understandings and observations of Li deposition/dissolution and SEI formation achieved from advanced characterization techniques and simulation methods, and discusses major limitations and open questions in these processes. In particular, the authors provide their perspectives on advanced and emerging/potential methods for obtaining new insights into these questions. In addition, they give an outlook into cutting-edge interdisciplinary research topics for Li metal anodes. It pushes beyond the current knowledge and is expected to accelerate development toward a more in-depth and comprehensive understanding, in order to guide future research on Li metal anodes toward practical application. KW - advanced characterization KW - Li deposition KW - Li dissolution KW - Li metal KW - anodes KW - mechanistic understanding KW - solid-electrolyte-interphase KW - theoretical simulation Y1 - 2022 U6 - https://doi.org/10.1002/aenm.202200398 SN - 1614-6832 SN - 1614-6840 VL - 12 IS - 19 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Rothe, Martin A1 - Zhao, Yuhang A1 - Müller, Johannes A1 - Kewes, Günter A1 - Koch, Christoph T. A1 - Lu, Yan A1 - Benson, Oliver T1 - Self-assembly of plasmonic nanoantenna-waveguide structures for subdiffractional chiral sensing JF - ACS nano N2 - Spin-momentum locking is a peculiar effect in the near-field of guided optical or plasmonic modes. It can be utilized to map the spinning or handedness of electromagnetic fields onto the propagation direction. This motivates a method to probe the circular dichroism of an illuminated chiral object. In this work, we demonstrate local, subdiffraction limited chiral coupling of light and propagating surface plasmon polaritons in a self-assembled system of a gold nanoantenna and a silver nanowire. A thin silica shell around the nanowire provides precise distance control and also serves as a host for fluorescent molecules, which indicate the direction of plasmon propagation. We characterize our nanoantenna-nanowire systems comprehensively through correlated electron microscopy, energy-dispersive X-ray spectroscopy, dark-field, and fluorescence imaging. Three-dimensional numerical simulations support the experimental findings. Besides our measurement of far-field polarization, we estimate sensing capabilities and derive not only a sensitivity of 1 mdeg for the ellipticity of the light field, but also find 10(3) deg cm(2)/dmol for the circular dichroism of an analyte locally introduced in the hot spot of the antenna-wire system. Thorough modeling of a prototypical design predicts on-chip sensing of chiral analytes. This introduces our system as an ultracompact sensor for chiral response far below the diffraction limit. KW - plasmonics KW - nanoparticle assemblies KW - core-shell KW - spin-orbit coupling KW - chirality KW - circular dichroism KW - nano-optics Y1 - 2021 U6 - https://doi.org/10.1021/acsnano.0c05240 SN - 1936-0851 SN - 1936-086X VL - 15 IS - 1 SP - 351 EP - 361 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Ning, Jiaoyi A1 - Yu, Hongtao A1 - Mei, Shilin A1 - Schütze, Yannik A1 - Risse, Sebastian A1 - Kardjilov, Nikolay A1 - Hilger, André A1 - Manke, Ingo A1 - Bande, Annika A1 - Ruiz, Victor G. A1 - Dzubiella, Joachim A1 - Meng, Hong A1 - Lu, Yan T1 - Constructing binder- and carbon additive-free organosulfur cathodes based on conducting thiol-polymers through electropolymerization for lithium-sulfur batteries JF - ChemSusChem N2 - Herein, the concept of constructing binder- and carbon additive-free organosulfur cathode was proved based on thiol-containing conducting polymer poly(4-(thiophene-3-yl) benzenethiol) (PTBT). The PTBT featured the polythiophene-structure main chain as a highly conducting framework and the benzenethiol side chain to copolymerize with sulfur and form a crosslinked organosulfur polymer (namely S/PTBT). Meanwhile, it could be in-situ deposited on the current collector by electro-polymerization, making it a binder-free and free-standing cathode for Li-S batteries. The S/PTBT cathode exhibited a reversible capacity of around 870 mAh g(-1) at 0.1 C and improved cycling performance compared to the physically mixed cathode (namely S&PTBT). This multifunction cathode eliminated the influence of the additives (carbon/binder), making it suitable to be applied as a model electrode for operando analysis. Operando X-ray imaging revealed the remarkable effect in the suppression of polysulfides shuttle via introducing covalent bonds, paving the way for the study of the intrinsic mechanisms in Li-S batteries. KW - electrochemistry KW - energy storage KW - lithium-sulfur batteries KW - operando KW - studies KW - organosulfur Y1 - 2022 U6 - https://doi.org/10.1002/cssc.202200434 SN - 1864-5631 SN - 1864-564X VL - 15 IS - 14 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Lau, Skadi A1 - Liu, Yue A1 - Maier, Anna A1 - Braune, Steffen A1 - Gossen, Manfred A1 - Neffe, Axel T. A1 - Lendlein, Andreas T1 - Establishment of an in vitro thrombogenicity test system with cyclic olefin copolymer substrate for endothelial layer formation JF - MRS communications / a publication of the Materials Research Society N2 - In vitro thrombogenicity test systems require co-cultivation of endothelial cells and platelets under blood flow-like conditions. Here, a commercially available perfusion system is explored using plasma-treated cyclic olefin copolymer (COC) as a substrate for the endothelial cell layer. COC was characterized prior to endothelialization and co-cultivation with platelets under static or flow conditions. COC exhibits a low roughness and a moderate hydrophilicity. Flow promoted endothelial cell growth and prevented platelet adherence. These findings show the suitability of COC as substrate and the importance of blood flow-like conditions for the assessment of the thrombogenic risk of drugs or cardiovascular implant materials. Y1 - 2021 U6 - https://doi.org/10.1557/s43579-021-00072-6 SN - 2159-6867 VL - 11 IS - 5 SP - 559 EP - 567 PB - Springer CY - Berlin ER - TY - JOUR A1 - Neusser, David A1 - Sun, Bowen A1 - Tan, Wen Liang A1 - Thomsen, Lars A1 - Schultz, Thorsten A1 - Perdigon-Toro, Lorena A1 - Koch, Norbert A1 - Shoaee, Safa A1 - McNeill, Christopher R. A1 - Neher, Dieter A1 - Ludwigs, Sabine T1 - Spectroelectrochemically determined energy levels of PM6:Y6 blends and their relevance to solar cell performance JF - Journal of materials chemistry : C, Materials for optical and electronic devices N2 - Recent advances in organic solar cell performance have been mainly driven forward by combining high-performance p-type donor-acceptor copolymers (e.g.PM6) and non-fullerene small molecule acceptors (e.g.Y6) as bulk-heterojunction layers. A general observation in such devices is that the device performance, e.g., the open-circuit voltage, is strongly dependent on the processing solvent. While the morphology is a typically named key parameter, the energetics of donor-acceptor blends are equally important, but less straightforward to access in the active multicomponent layer. Here, we propose to use spectral onsets during electrochemical cycling in a systematic spectroelectrochemical study of blend films to access the redox behavior and the frontier orbital energy levels of the individual compounds. Our study reveals that the highest occupied molecular orbital offset (Delta E-HOMO) in PM6:Y6 blends is similar to 0.3 eV, which is comparable to the binding energy of Y6 excitons and therefore implies a nearly zero driving force for the dissociation of Y6 excitons. Switching the PM6 orientation in the blend films from face-on to edge-on in bulk has only a minor influence on the positions of the energy levels, but shows significant differences in the open circuit voltage of the device. We explain this phenomenon by the different interfacial molecular orientations, which are known to affect the non-radiative decay rate of the charge-transfer state. We compare our results to ultraviolet photoelectron spectroscopy data, which shows distinct differences in the HOMO offsets in the PM6:Y6 blend compared to neat films. This highlights the necessity to measure the energy levels of the individual compounds in device-relevant blend films. Y1 - 2022 U6 - https://doi.org/10.1039/d2tc01918c SN - 2050-7526 SN - 2050-7534 VL - 10 IS - 32 SP - 11565 EP - 11578 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Tung, Wing Tai A1 - Sun, Xianlei A1 - Wang, Weiwei A1 - Xu, Xun A1 - Ma, Nan A1 - Lendlein, Andreas T1 - Structure, mechanical properties and degradation behavior of electrospun PEEU fiber meshes and films JF - MRS advances : a journal of the Materials Research Society (MRS) N2 - The capability of a degradable implant to provide mechanical support depends on its degradation behavior. Hydrolytic degradation was studied for a polyesteretherurethane (PEEU70), which consists of poly(p-dioxanone) (PPDO) and poly(epsilon-caprolactone) (PCL) segments with a weight ratio of 70:30 linked by diurethane junction units. PEEU70 samples prepared in the form of meshes with average fiber diameters of 1.5 mu m (mesh1.5) and 1.2 mu m (mesh1.2), and films were sterilized and incubated in PBS at 37 degrees C with 5 vol% CO2 supply for 1 to 6 weeks. Degradation features, such as cracks or wrinkles, became apparent from week 4 for all samples. Mass loss was found to be 11 wt%, 6 wt%, and 4 wt% for mesh1.2, mesh1.5, and films at week 6. The elongation at break decreased to under 20% in two weeks for mesh1.2. In case of the other two samples, this level of degradation was achieved after 4 weeks. The weight average molecular weight of both PEEU70 mesh and film samples decreased to below 30 kg/mol when elongation at break dropped below 20%. The time period of sustained mechanical stability of PEEU70-based meshes depends on the fiber diameter and molecular weight. Y1 - 2021 U6 - https://doi.org/10.1557/s43580-020-00001-0 SN - 2059-8521 VL - 6 IS - 10 SP - 276 EP - 282 PB - Springer Nature Switzerland AG CY - Cham ER - TY - JOUR A1 - Stefancu, Andrei A1 - Nan, Lin A1 - Zhu, Li A1 - Chis, Vasile A1 - Bald, Ilko A1 - Liu, Min A1 - Leopold, Nicolae A1 - Maier, Stefan A. A1 - Cortes, Emiliano T1 - Controlling plasmonic chemistry pathways through specific ion effects JF - Advanced optical materials N2 - Plasmon-driven dehalogenation of brominated purines has been recently explored as a model system to understand fundamental aspects of plasmon-assisted chemical reactions. Here, it is shown that divalent Ca2+ ions strongly bridge the adsorption of bromoadenine (Br-Ade) to Ag surfaces. Such ion-mediated binding increases the molecule's adsorption energy leading to an overlap of the metal energy states and the molecular states, enabling the chemical interface damping (CID) of the plasmon modes of the Ag nanostructures (i.e., direct electron transfer from the metal to Br-Ade). Consequently, the conversion of Br-Ade to adenine almost doubles following the addition of Ca2+. These experimental results, supported by theoretical calculations of the local density of states of the Ag/Br-Ade complex, indicate a change of the charge transfer pathway driving the dehalogenation reaction, from Landau damping (in the lack of Ca2+ ions) to CID (after the addition of Ca2+). The results show that the surface dynamics of chemical species (including water molecules) play an essential role in charge transfer at plasmonic interfaces and cannot be ignored. It is envisioned that these results will help in designing more efficient nanoreactors, harnessing the full potential of plasmon-assisted chemistry. KW - chemical interface damping KW - Hofmeister effect KW - hydration layer KW - plasmonic chemistry KW - specific ion effects KW - surface-enhanced Raman scattering Y1 - 2022 U6 - https://doi.org/10.1002/adom.202200397 SN - 2195-1071 VL - 10 IS - 14 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Zhao, Yuhang A1 - Opitz, Andreas A1 - Eljarrat, Alberto A1 - Kochovski, Zdravko A1 - Koch, Christoph A1 - Koch, Norbert A1 - Lu, Yan T1 - Kinetic study on the adsorption of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane on Ag nanoparticles in chloroform BT - implications for the charge transfer complex of Ag-F(4)TCNQ JF - ACS applied nano materials N2 - In this study, the kinetics of the adsorption of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F(4)TCNQ) on the surface of Ag nanoparticles (Ag NPs) in chloroform has been intensively investigated, as molecular doping is known to play a crucial role in organic electronic devices. Based on the results obtained from UV-visible (vis)-near-infrared (NIR) absorption spectroscopy, cryogenic transmission electron microscopy, scanning nanobeam electron diffraction, and electron energy loss spectroscopy, a two-step interaction kinetics has been proposed for the Ag NPs and F(4)TCNQ molecules, which includes the first step of electron transfer from Ag NPs to F(4)TCNQ indicated by the ionization of F(4)TCNQ and the second step of the formation of a Ag-F(4)TCNQ complex. The whole process has been followed via UV-vis-NIR absorption spectroscopy, which reveals distinct kinetics at two stages: the instantaneous ionization and the long-term complex formation. The kinetics and the influence of the molar ratio of Ag NPs/F(4)TCNQ molecules on the interaction between Ag NPs and F(4)TCNQ molecules in an organic solution are reported herein for the first time. Furthermore, the control experiment with silica-coated Ag NPs manifests that the charge transfer at the surface between Ag NPs and F(4)TCNQ molecules is prohibited by a silica layer of 18 nm. KW - Ag nanoparticles KW - F(4)TCNQ KW - phase transfer KW - kinetics KW - electron transfer KW - surface interaction Y1 - 2021 U6 - https://doi.org/10.1021/acsanm.1c02153 SN - 2574-0970 VL - 4 IS - 11 SP - 11625 EP - 11635 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Zhou, Shuo A1 - Xu, Xun A1 - Ma, Nan A1 - Jung, Friedrich A1 - Lendlein, Andreas T1 - Influence of sterilization conditions on sulfate-functionalized polyGGE JF - Clinical hemorheology and microcirculation : blood flow and vessels N2 - Sulfated biomolecules are known to influence numerous biological processes in all living organisms. Particularly, they contribute to prevent and inhibit the hypercoagulation condition. The failure of polymeric implants and blood contacting devices is often related to hypercoagulation and microbial contamination. Here, bioactive sulfated biomacromolecules are mimicked by sulfation of poly(glycerol glycidyl ether) (polyGGE) films. Autoclaving, gamma-ray irradiation and ethylene oxide (EtO) gas sterilization techniques were applied to functionalized materials. The sulfate group density and hydrophilicity of sulfated polymers were decreased while chain mobility and thermal degradation were enhanced post autoclaving when compared to those after EtO sterilization. These results suggest that a quality control after sterilization is mandatory to ensure the amount and functionality of functionalized groups are retained. KW - Sulfated polymer KW - sulfation KW - sterilization KW - ethylene oxide Y1 - 2021 U6 - https://doi.org/10.3233/CH-211241 SN - 1386-0291 SN - 1875-8622 VL - 79 IS - 4 SP - 597 EP - 608 PB - IOS Press CY - Amsterdam ER - TY - THES A1 - Mostafa, Amr T1 - DNA origami nanoforks: A platform for cytochrome c single molecule surface enhanced Raman spectroscopy N2 - This thesis presents a comprehensive exploration of the application of DNA origami nanofork antennas (DONAs) in the field of spectroscopy, with a particular focus on the structural analysis of Cytochrome C (CytC) at the single-molecule level. The research encapsulates the design, optimization, and application of DONAs in enhancing the sensitivity and specificity of Raman spectroscopy, thereby offering new insights into protein structures and interactions. The initial phase of the study involved the meticulous optimization of DNA origami structures. This process was pivotal in developing nanoscale tools that could significantly enhance the capabilities of Raman spectroscopy. The optimized DNA origami nanoforks, in both dimer and aggregate forms, demonstrated an enhanced ability to detect and analyze molecular vibrations, contributing to a more nuanced understanding of protein dynamics. A key aspect of this research was the comparative analysis between the dimer and aggregate forms of DONAs. This comparison revealed that while both configurations effectively identified oxidation and spin states of CytC, the aggregate form offered a broader range of detectable molecular states due to its prolonged signal emission and increased number of molecules. This extended duration of signal emission in the aggregates was attributed to the collective hotspot area, enhancing overall signal stability and sensitivity. Furthermore, the study delved into the analysis of the Amide III band using the DONA system. Observations included a transient shift in the Amide III band's frequency, suggesting dynamic alterations in the secondary structure of CytC. These shifts, indicative of transitions between different protein structures, were crucial in understanding the protein’s functional mechanisms and interactions. The research presented in this thesis not only contributes significantly to the field of spectroscopy but also illustrates the potential of interdisciplinary approaches in biosensing. The use of DNA origami-based systems in spectroscopy has opened new avenues for research, offering a detailed and comprehensive understanding of protein structures and interactions. The insights gained from this research are expected to have lasting implications in scientific fields ranging from drug development to the study of complex biochemical pathways. This thesis thus stands as a testament to the power of integrating nanotechnology, biochemistry, and spectroscopic techniques in addressing complex scientific questions. N2 - Diese Dissertation präsentiert eine umfassende Untersuchung der Anwendung von DNA-Origami-Nanogabelantennen (DONAs) im Bereich der Spektroskopie, mit einem besonderen Fokus auf der strukturellen Analyse von Cytochrom C (CytC) auf Einzelmolekülebene. Die Forschung umfasst das Design, die Optimierung und die Anwendung von DONAs zur Steigerung der Sensitivität und Spezifität der Raman-Spektroskopie und bietet somit neue Einblicke in Proteinstrukturen und -interaktionen. Die erste Phase der Studie beinhaltete die sorgfältige Optimierung von DNA-Origami-Strukturen. Dieser Prozess war entscheidend für die Entwicklung von Nanowerkzeugen, die die Fähigkeiten der Raman-Spektroskopie erheblich verbessern könnten. Die optimierten DNA-Origami-Nanogabeln, sowohl in Dimer- als auch in Aggregatform, zeigten eine verbesserte Fähigkeit, molekulare Schwingungen zu detektieren und zu analysieren, was zu einem nuancierteren Verständnis der Proteindynamik beitrug. Ein Schlüsselaspekt dieser Forschung war die vergleichende Analyse zwischen den Dimer- und Aggregatformen von DONAs. Dieser Vergleich zeigte, dass beide Konfigurationen effektiv Oxidations- und Spin-Zustände von CytC identifizieren konnten, wobei die Aggregatform aufgrund ihrer längeren Signalemission und der erhöhten Anzahl von Molekülen ein breiteres Spektrum an detektierbaren molekularen Zuständen bot. Die verlängerte Dauer der Signalemission in den Aggregaten wurde auf den kollektiven Hotspot-Bereich zurückgeführt, der die Gesamtsignalstabilität und -empfindlichkeit erhöhte. Darüber hinaus ging die Studie auf die Analyse der Amid-III-Bande unter Verwendung des DONA-Systems ein. Zu den Beobachtungen gehörte eine vorübergehende Verschiebung der Frequenz der Amid-III-Bande, was auf dynamische Veränderungen in der Sekundärstruktur von CytC hindeutete. Diese Verschiebungen, die auf Übergänge zwischen verschiedenen Proteinstrukturen hindeuteten, waren entscheidend für das Verständnis der funktionellen Mechanismen und Interaktionen des Proteins. Die in dieser Dissertation präsentierte Forschung leistet nicht nur einen bedeutenden Beitrag zum Gebiet der Spektroskopie, sondern veranschaulicht auch das Potenzial interdisziplinärer Ansätze in der Biosensorik. Der Einsatz von DNA-Origami-basierten Systemen in der Spektroskopie hat neue Wege für die Forschung eröffnet und bietet ein detailliertes und umfassendes Verständnis von Proteinstrukturen und -interaktionen. Die aus dieser Forschung gewonnenen Erkenntnisse werden voraussichtlich langfristige Auswirkungen auf wissenschaftliche Bereiche haben, die von der Arzneimittelentwicklung bis hin zur Untersuchung komplexer biochemischer Prozesse reichen. Diese Dissertation steht somit als Zeugnis für die Kraft der Integration von Nanotechnologie, Biochemie und spektroskopischen Techniken bei der Beantwortung komplexer wissenschaftlicher Fragen. KW - DNA origami KW - DNA origami nanoantennas (DONA) KW - SERS KW - Cytochrome C Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-635482 ER - TY - JOUR A1 - Michaelis, Vivien A1 - Aengenheister, Leonie A1 - Tuchtenhagen, Max A1 - Rinklebe, Jörg A1 - Ebert, Franziska A1 - Schwerdtle, Tanja A1 - Buerki-Thurnherr, Tina A1 - Bornhorst, Julia T1 - Differences and interactions in placental manganese and iron transfer across an in vitro model of human villous trophoblasts JF - International journal of molecular sciences N2 - Manganese (Mn) as well as iron (Fe) are essential trace elements (TE) important for the maintenance of physiological functions including fetal development. However, in the case of Mn, evidence suggests that excess levels of intrauterine Mn are associated with adverse pregnancy outcomes. Although Mn is known to cross the placenta, the fundamentals of Mn transfer kinetics and mechanisms are largely unknown. Moreover, exposure to combinations of TEs should be considered in mechanistic transfer studies, in particular for TEs expected to share similar transfer pathways. Here, we performed a mechanistic in vitro study on the placental transfer of Mn across a BeWo b30 trophoblast layer. Our data revealed distinct differences in the placental transfer of Mn and Fe. While placental permeability to Fe showed a clear inverse dose-dependency, Mn transfer was largely independent of the applied doses. Concurrent exposure of Mn and Fe revealed transfer interactions of Fe and Mn, indicating that they share common transfer mechanisms. In general, mRNA and protein expression of discussed transporters like DMT1, TfR, or FPN were only marginally altered in BeWo cells despite the different exposure scenarios highlighting that Mn transfer across the trophoblast layer likely involves a combination of active and passive transport processes. KW - manganese KW - iron KW - placental transfer KW - TE interactions KW - BeWo b30 KW - trophoblasts Y1 - 2022 U6 - https://doi.org/10.3390/ijms23063296 SN - 1422-0067 VL - 23 IS - 6 PB - MDPI CY - Basel ER - TY - GEN A1 - Bande, Annika A1 - González, Leticia A1 - Klamroth, Tillmann A1 - Tremblay, Jean Christophe T1 - Theoretical chemistry and quantum dynamics at interfaces BT - Celebrating the career of Peter Saalfrank on the occasion of his 60th birthday T2 - Chemical physics : a journal devoted to experimental and theoretical research involving problems of both a chemical and physical nature Y1 - 2022 U6 - https://doi.org/10.1016/j.chemphys.2022.111509 SN - 0301-0104 SN - 1873-4421 VL - 558 PB - Elsevier Science CY - Amsterdam [u.a.] ER - TY - JOUR A1 - Crovetto, Andrea A1 - Kojda, Danny A1 - Yi, Feng A1 - Heinselman, Karen N. A1 - LaVan, David A. A1 - Habicht, Klaus A1 - Unold, Thomas A1 - Zakutayev, Andriy T1 - Crystallize It before It diffuses BT - kinetic stabilization of thin-film phosphorus-rich semiconductor CuP2 JF - Journal of the american chemical society N2 - Numerous phosphorus-rich metal phosphides containing both P-P bonds and metal-P bonds are known from the solid-state chemistry literature. A method to grow these materials in thin-film form would be desirable, as thin films are required in many applications and they are an ideal platform for high-throughput studies. In addition, the high density and smooth surfaces achievable in thin films are a significant advantage for characterization of transport and optical properties. Despite these benefits, there is hardly any published work on even the simplest binary phosphorus-rich phosphide films. Here, we demonstrate growth of single-phase CuP2 films by a two-step process involving reactive sputtering of amorphous CuP2+x and rapid annealing in an inert atmosphere. At the crystallization temperature, CuP2 is thermodynamically unstable with respect to Cu3P and P-4. However, CuP2 can be stabilized if the amorphous precursors are mixed on the atomic scale and are sufficiently close to the desired composition (neither too P poor nor too P rich). Fast formation of polycrystalline CuP2, combined with a short annealing time, makes it possible to bypass the diffusion processes responsible for decomposition. We find that thin-film CuP2 is a 1.5 eV band gap semiconductor with interesting properties, such as a high optical absorption coefficient (above 10(5) cm(-1)), low thermal conductivity (1.1 W/(K m)), and composition-insensitive electrical conductivity (around 1 S/cm). We anticipate that our processing route can be extended to other phosphorus-rich phosphides that are still awaiting thin-film synthesis and will lead to a more complete understanding of these materials and of their potential applications. Y1 - 2022 U6 - https://doi.org/10.1021/jacs.2c04868 SN - 0002-7863 SN - 1520-5126 VL - 144 IS - 29 SP - 13334 EP - 13343 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Tung, Wing Tai A1 - Maring, Janita A. A1 - Xu, Xun A1 - Liu, Yue A1 - Becker, Matthias A1 - Somesh, Dipthi Bachamanda A1 - Klose, Kristin A1 - Wang, Weiwei A1 - Sun, Xianlei A1 - Ullah, Imran A1 - Kratz, Karl A1 - Neffe, Axel T. A1 - Stamm, Christof A1 - Ma, Nan A1 - Lendlein, Andreas T1 - In vivo performance of a cell and factor free multifunctional fiber mesh modulating postinfarct myocardial remodeling JF - Advanced Functional Materials N2 - Guidance of postinfarct myocardial remodeling processes by an epicardial patch system may alleviate the consequences of ischemic heart disease. As macrophages are highly relevant in balancing immune response and regenerative processes their suitable instruction would ensure therapeutic success. A polymeric mesh capable of attracting and instructing monocytes by purely physical cues and accelerating implant degradation at the cell/implant interface is designed. In a murine model for myocardial infarction the meshes are compared to those either coated with extracellular matrix or loaded with induced cardiomyocyte progenitor cells. All implants promote macrophage infiltration and polarization in the epicardium, which is verified by in vitro experiments. 6 weeks post-MI, especially the implantation of the mesh attenuates left ventricular adverse remodeling processes as shown by reduced infarct size (14.7% vs 28-32%) and increased wall thickness (854 mu m vs 400-600 mu m), enhanced angiogenesis/arteriogenesis (more than 50% increase compared to controls and other groups), and improved heart function (ejection fraction = 36.8% compared to 12.7-31.3%). Upscaling as well as process controls is comprehensively considered in the presented mesh fabrication scheme to warrant further progression from bench to bedside. KW - bioinstructive materials KW - cardiac regeneration KW - function by structure; KW - modulation of in vivo regeneration KW - multifunctional biomaterials Y1 - 2022 U6 - https://doi.org/10.1002/adfm.202110179 SN - 1616-301X SN - 1616-3028 VL - 32 IS - 31 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Breternitz, Joachim A1 - Schorr, Susan T1 - Symmetry relations in wurtzite nitrides and oxide nitrides and the curious case of Pmc2(1) JF - Acta crystallographica / International Union of Crystallography. Section A, Foundations and advances N2 - Binary III-V nitrides such as AlN, GaN and InN in the wurtzite-type structure have long been considered as potent semiconducting materials because of their optoelectronic properties, amongst others. With rising concerns over the utilization of scarce elements, a replacement of the trivalent cations by others in ternary and multinary nitrides has led to the development of different variants of nitrides and oxide nitrides crystallizing in lower-symmetry variants of wurtzite. This work presents the symmetry relationships between these structural types specific to nitrides and oxide nitrides and updates some prior work on this matter. The non-existence of compounds crystallizing in Pmc2(1), formally the highest subgroup of the wurtzite type fulfilling Pauling's rules for 1:1:2 stoichiometries, has been puzzling scientists for a while; a rationalization is given, from a crystallographic basis, of why this space group is unlikely to be adopted. KW - group-subgroup relationships KW - nitride materials KW - wurtzite type Y1 - 2021 U6 - https://doi.org/10.1107/S2053273320015971 SN - 2053-2733 VL - 77 IS - 3 SP - 208 EP - 216 PB - Blackwell CY - Oxford [u.a.] ER - TY - JOUR A1 - Mei, Shilin A1 - Siebert, Andreas A1 - Xu, Yaolin A1 - Quan, Ting A1 - Garcia-Diez, Raul A1 - Bär, Marcus A1 - Härtel, Paul A1 - Abendroth, Thomas A1 - Dörfler, Susanne A1 - Kaskel, Stefan A1 - Lu, Yan T1 - Large-Scale Synthesis of Nanostructured Carbon-Ti4O7 Hollow Particles as Efficient Sulfur Host Materials for Multilayer Lithium-Sulfur Pouch Cells JF - Batteries & supercaps N2 - Applications of advanced cathode materials with well-designed chemical components and/or optimized nanostructures promoting the sulfur redox kinetics and suppressing the shuttle effect of polysulfides are highly valued. However, in the case of actual lithium-sulfur (Li-S) batteries under practical working conditions, one long-term obstacle still exists, which is mainly due to the difficulties in massive synthesis of such nanomaterials with low cost and ease of control on the nanostructure. Herein, we develop a facile synthesis of carbon coated Ti4O7 hollow nanoparticles (Ti4O7) using spherical polymer electrolyte brush as soft template, which is scalable via utilizing a minipilot reactor. The C Ti4O7 hollow nanoparticles provide strong chemical adsorption to polysulfides through the large polar surface and additional physical confinement by rich micro- & mesopores and have successfully been employed as an efficient sulfur host for multilayer pouch cells. Besides, the sluggish kinetics of the sulfur and lithium sulfide redox mechanism can be improved by the highly conductive Ti4O7 via catalyzation of the conversion of polysulfides. Consequently, the C-Ti4O7 based pouch cell endows a high discharge capacity of 1003 mAhg(-1) at 0.05 C, a high-capacity retention of 83.7% after 100 cycles at 0.1 C, and a high Coulombic efficiency of 97.5% at the 100th cycle. This work proposes an effective approach to transfer the synthesis of hollow Ti4O7 nanoparticles from lab- to large-scale production, paving the way to explore a wide range of advanced nanomaterials for multilayer Li-S pouch cells. KW - lithium-sulfur batteries KW - pouch cell KW - spherical polyelectrolyte brushes (SPB) KW - Ti4O7 Y1 - 2022 U6 - https://doi.org/10.1002/batt.202100398 SN - 2566-6223 VL - 5 IS - 6 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Lepre, Enrico A1 - Heske, Julian A1 - Nowakowski, Michal A1 - Scoppola, Ernesto A1 - Zizak, Ivo A1 - Heil, Tobias A1 - Kühne, Thomas D. A1 - Antonietti, Markus A1 - Lopez-Salas, Nieves A1 - Albero, Josep T1 - Ni-based electrocatalysts for unconventional CO2 reduction reaction to formic acid JF - Nano energy N2 - Electrochemical reduction stands as an alternative to revalorize CO2. Among the different alternatives, Ni single atoms supported on carbonaceous materials are an appealing catalytic solution due to the low cost and versatility of the support and the optimal usage of Ni and its predicted selectivity and efficiency (ca. 100% towards CO). Herein, we have used noble carbonaceous support derived from cytosine to load Ni subnanometric sites. The large heteroatom content of the support allows the stabilization of up to 11 wt% of Ni without the formation of nanoparticles through a simple impregnation plus calcination approach, where nickel promotes the stabilization of C3NOx frameworks and the oxidative support promotes a high oxidation state of nickel. EXAFS analysis points at nickel single atoms or subnanometric clusters coordinated by oxygen in the material surface. Unlike the wellknown N-coordinated Ni single sites selectivity towards CO2 reduction, O-coordinated-Ni single sites (ca. 7 wt% of Ni) reduced CO2 to CO, but subnanometric clusters (11 wt% of Ni) foster the unprecedented formation of HCOOH with 27% Faradaic efficiency at - 1.4 V. Larger Ni amounts ended up on the formation of NiO nanoparticles and almost 100% selectivity towards hydrogen evolution. KW - CO 2 reduction reaction KW - Noble carbon KW - Ni-O4 electrocatalysts KW - Formic acid Y1 - 2022 U6 - https://doi.org/10.1016/j.nanoen.2022.107191 SN - 2211-2855 SN - 2211-3282 VL - 97 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Haubitz, Toni A1 - Drobot, Björn A1 - Tsushima, Satoru A1 - Steudtner, Robin A1 - Stumpf, Thorsten A1 - Kumke, Michael Uwe T1 - Quenching mechanism of uranyl(VI) by chloride and bromide in aqueous and non-aqueous solutions JF - The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment & general theory N2 - A major hindrance in utilizing uranyl(VI) luminescence as a standard analytical tool, for example, in environmental monitoring or nuclear industries, is quenching by other ions such as halide ions, which are present in many relevant matrices of uranyl(VI) speciation. Here, we demonstrate through a combination of time-resolved laser-induced fluorescence spectroscopy, transient absorption spectroscopy, and quantum chemistry that coordinating solvent molecules play a crucial role in U(VI) halide luminescence quenching. We show that our previously suggested quenching mechanism based on an internal redox reaction of the 1:2-uranyl-halide-complex holds also true for bromide-induced quenching of uranyl(VI). By adopting specific organic solvents, we were able to suppress the separation of the oxidized halide ligand X-2(center dot-) and the formed uranyl(V) into fully solvated ions, thereby "reigniting" U(VI) luminescence. Time-dependent density functional theory calculations show that quenching occurs through the outer-sphere complex of U(VI) and halide in water, while the ligand-to-metal charge transfer is strongly reduced in acetonitrile. Y1 - 2021 U6 - https://doi.org/10.1021/acs.jpca.1c02487 SN - 1089-5639 SN - 1520-5215 VL - 125 IS - 20 SP - 4380 EP - 4389 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Pham, Duong Tung A1 - Quan, Ting A1 - Mei, Shilin A1 - Lu, Yan T1 - Colloidal metal sulfide nanoparticles for high performance electrochemical energy storage systems JF - Current opinion in green and sustainable chemistry N2 - Transition metal sulfides have emerged as excellent replacement candidates of traditional insertion electrode materials based on their conversion or alloying mechanisms, facilitating high specific capacity and rate ability. However, parasitic reactions such as massive volume change during the discharge/ charge processes, intermediate polysulfide dissolution, and passivating solid electrolyte interface formation have led to poor cyclability, hindering their feasibility and applicability in energy storage systems. Colloidal metal sulfide nanoparticles, a special class that integrates the intrinsic chemical properties of metal sulfides and their specified structural features, have fairly enlarged their contribution due to the synergistic effect. This review highlights the latest synthetic approaches based on colloidal process. Their corresponding electrochemical outcomes will also be discussed, which are thoroughly updated along with their insight scientific standpoints. Y1 - 2022 U6 - https://doi.org/10.1016/j.cogsc.2022.100596 SN - 2452-2236 VL - 34 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Reitenbach, Julija A1 - Geiger, Christina A1 - Wang, Peixi A1 - Vagias, Apostolos N. A1 - Cubitt, Robert A1 - Schanzenbach, Dirk A1 - Laschewsky, André A1 - Papadakis, Christine M. A1 - Müller-Buschbaum, Peter T1 - Effect of magnesium salts with chaotropic anions on the swelling behavior of PNIPMAM thin films JF - Macromolecules : a publication of the American Chemical Society N2 - Poly(N-isopropylmethacrylamide) (PNIPMAM) is a stimuli responsive polymer, which in thin film geometry exhibits a volume-phase transition upon temperature increase in water vapor. The swelling behavior of PNIPMAM thin films containing magnesium salts in water vapor is investigated in view of their potential application as nanodevices. Both the extent and the kinetics of the swelling ratio as well as the water content are probed with in situ time-of-flight neutron reflectometry. Additionally, in situ Fourier-transform infrared (FTIR) spectroscopy provides information about the local solvation of the specific functional groups, while two-dimensional FTIR correlation analysis further elucidates the temporal sequence of solvation events. The addition of Mg(ClO4)2 or Mg(NO3)2 enhances the sensitivity of the polymer and therefore the responsiveness of switches and sensors based on PNIPMAM thin films. It is found that Mg(NO3)2 leads to a higher relative water uptake and therefore achieves the highest thickness gain in the swollen state. Y1 - 2023 U6 - https://doi.org/10.1021/acs.macromol.2c02282 SN - 0024-9297 SN - 1520-5835 VL - 56 IS - 2 SP - 567 EP - 577 PB - American Chemical Society CY - Washington ER - TY - CHAP A1 - Breternitz, Joachim A1 - Schorr, Susan T1 - Halide perovskites BT - structural systematisation and what we learn from it T2 - Acta crystallographica / International Union of Crystallography. Section A, Foundations and advances KW - halide perovskites KW - semiconductors KW - group-subgroup relations KW - twinning Y1 - 2021 U6 - https://doi.org/10.1107/S0108767321089479 SN - 2053-2733 VL - 77 IS - Suppl. SP - C750 EP - C750 PB - Blackwell CY - Oxford [u.a.] ER - TY - JOUR A1 - Nchiozem-Ngnitedem, Vaderament-Alexe A1 - Sperlich, Eric A1 - Matieta, Valaire Yemene A1 - Kuete, Jenifer Reine Ngnouzouba A1 - Kuete, Victor A1 - Omer, Ejlal A. A. A1 - Efferth, Thomas A1 - Schmidt, Bernd T1 - Synthesis and bioactivity of isoflavones from ficus carica and some non-natural analogues JF - Journal of natural products : Lloydia N2 - FicucariconeD (1) and its 4 '-demethyl congener 2 are isoflavones isolated from fruits of Ficus carica that share a 5,7-dimethoxy-6-prenyl-substituted A-ring. Both naturalproducts were, for the first time, obtained by chemical synthesisin six steps, starting from 2,4,6-trihydroxyacetophenone. Key stepsare a microwave-promoted tandem sequence of Claisen- and Cope-rearrangementsto install the 6-prenyl substituent and a Suzuki-Miyaura crosscoupling for installing the B-ring. By using various boronic acids,non-natural analogues become conveniently available. All compoundswere tested for cytotoxicity against drug-sensitive and drug-resistanthuman leukemia cell lines, but were found to be inactive. The compoundswere also tested for antimicrobial activities against a panel of eightGram-negative and two Gram-positive bacterial strains. Addition ofthe efflux pump inhibitor phenylalanine-arginine-beta-naphthylamide(PA beta N) significantly improved the antibiotic activity in mostcases, with MIC values as low as 2.5 mu M and activity improvementfactors as high as 128-fold. KW - Antimicrobial activity KW - Bacteria KW - Ethers KW - Flavonoids KW - Mixtures Y1 - 2023 U6 - https://doi.org/10.1021/acs.jnatprod.3c00219 SN - 0163-3864 SN - 1520-6025 VL - 86 IS - 6 SP - 1520 EP - 1528 PB - American Chemical Society CY - Washington, DC ER - TY - JOUR A1 - Geiger, Christina A1 - Reitenbach, Julija A1 - Henschel, Cristiane A1 - Kreuzer, Lucas A1 - Widmann, Tobias A1 - Wang, Peixi A1 - Mangiapia, Gaetano A1 - Moulin, Jean-François A1 - Papadakis, Christine M. A1 - Laschewsky, André A1 - Müller-Buschbaum, Peter T1 - Ternary nanoswitches realized with multiresponsive PMMA-b-PNIPMAM films in mixed water/acetone vapor atmospheres JF - Advanced engineering materials N2 - To systematically add functionality to nanoscale polymer switches, an understanding of their responsive behavior is crucial. Herein, solvent vapor stimuli are applied to thin films of a diblock copolymer consisting of a short poly(methyl methacrylate) (PMMA) block and a long poly(N-isopropylmethacrylamide) (PNIPMAM) block for realizing ternary nanoswitches. Three significantly distinct film states are successfully implemented by the combination of amphiphilicity and co-nonsolvency effect. The exposure of the thin films to nitrogen, pure water vapor, and mixed water/acetone (90 vol%/10 vol%) vapor switches the films from a dried to a hydrated (solvated and swollen) and a water/acetone-exchanged (solvated and contracted) equilibrium state. These three states have distinctly different film thicknesses and solvent contents, which act as switch positions "off," "on," and "standby." For understanding the switching process, time-of-flight neutron reflectometry (ToF-NR) and spectral reflectance (SR) studies of the swelling and dehydration process are complemented by information on the local solvation of functional groups probed with Fourier-transform infrared (FTIR) spectroscopy. An accelerated responsive behavior beyond a minimum hydration/solvation level is attributed to the fast build-up and depletion of the hydration shell of PNIPMAM, caused by its hydrophobic moieties promoting a cooperative hydration character. KW - co-nonsolvency KW - diblock copolymers KW - nanoswitches KW - neutron reflectometry KW - thin films Y1 - 2021 U6 - https://doi.org/10.1002/adem.202100191 SN - 1438-1656 SN - 1527-2648 VL - 23 IS - 11 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Melani, Giacomo A1 - Nagata, Yuki A1 - Saalfrank, Peter T1 - Vibrational energy relaxation of interfacial OH on a water-covered alpha-Al2O3(0001) surface BT - a non-equilibrium ab initio molecular dynamics study JF - Physical chemistry, chemical physics : PCCP ; a journal of European chemical societies N2 - Vibrational relaxation of adsorbates is a sensitive tool to probe energy transfer at gas/solid and liquid/solid interfaces. The most direct way to study relaxation dynamics uses time-resolved spectroscopy. Here we report on a non-equilibrium ab initio molecular dynamics (NE-AIMD) methodology to model vibrational relaxation of OH vibrations on a hydroxylated, water-covered alpha-Al2O3(0001) surface. In our NE-AIMD approach, after exciting selected O-H bonds their coupling to surface phonons and to the water adlayer is analyzed in detail, by following both the energy flow in time, as well as the time-evolution of Vibrational Density of States (VDOS) curves. The latter are obtained from Time-dependent Correlation Functions (TCFs) and serve as prototypical, generic representatives of time-resolved vibrational spectra. As most important results, (i) we find a few-picosecond lifetime of the excited modes and (ii) identify both hydrogen-bonded aluminols and water molecules in the adsorbed water layer as main dissipative channels, while the direct coupling to Al2O3 surface phonons is of minor importance on the timescales of interest. Our NE-AIMD/TCF methodology is powerful for complex adsorbate systems, in principle even reacting ones, and opens a way towards time-resolved vibrational spectroscopy. Y1 - 2021 U6 - https://doi.org/10.1039/d0cp03777j SN - 1463-9076 SN - 1463-9084 VL - 23 IS - 13 SP - 7714 EP - 7723 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Wang, Zhenyu A1 - Fritsch, Daniel A1 - Berendts, Stefan A1 - Lerch, Martin A1 - Breternitz, Joachim A1 - Schorr, Susan T1 - Elucidation of the reaction mechanism for the synthesis of ZnGeN2 through Zn2GeO4 ammonolysis JF - Chemical science / RSC, Royal Society of Chemistry N2 - Ternary II-IV-N-2 materials have been considered as a promising class of materials that combine photovoltaic performance with earth-abundance and low toxicity. When switching from binary III-V materials to ternary II-IV-N-2 materials, further structural complexity is added to the system that may influence its optoelectronic properties. Herein, we present a systematic study of the reaction of Zn2GeO4 with NH3 that produces zinc germanium oxide nitrides, and ultimately approach stoichiometric ZnGeN2, using a combination of chemical analyses, X-ray powder diffraction and DFT calculations. Elucidating the reaction mechanism as being dominated by Zn and O extrusion at the later reaction stages, we give an insight into studying structure-property relationships in this emerging class of materials. Y1 - 2021 U6 - https://doi.org/10.1039/d1sc00328c SN - 2041-6539 VL - 12 IS - 24 SP - 8493 EP - 8500 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Saeedi Garakani, Sadaf A1 - Xie, Dongjiu A1 - Khorsand Kheirabad, Atefeh A1 - Lu, Yan A1 - Yuan, Jiayin T1 - Template-synthesis of a poly(ionic liquid)-derived Fe1-xS/nitrogen-doped porous carbon membrane and its electrode application in lithium-sulfur batteries JF - Materials advances N2 - This study deals with the facile synthesis of Fe1-xS nanoparticle-containing nitrogen-doped porous carbon membranes (denoted as Fe1-xS/N-PCMs) via vacuum carbonization of hybrid porous poly(ionic liquid) (PIL) membranes, and their successful use as a sulfur host material to mitigate the shuttle effect in lithium-sulfur (Li-S) batteries. The hybrid porous PIL membranes as the sacrificial template were prepared via ionic crosslinking of a cationic PIL with base-neutralized 1,1 '-ferrocenedicarboxylic acid, so that the iron source was molecularly incorporated into the template. The carbonization process was investigated in detail at different temperatures, and the chemical and porous structures of the carbon products were comprehensively analyzed. The Fe1-xS/N-PCMs prepared at 900 degrees C have a multimodal pore size distribution with a satisfactorily high surface area and well-dispersed iron sulfide nanoparticles to physically and chemically confine the LiPSs. The sulfur/Fe1-xS/N-PCM composites were then tested as electrodes in Li-S batteries, showing much improved capacity, rate performance and cycle stability, in comparison to iron sulfide-free, nitrogen-doped porous carbon membranes. Y1 - 2021 U6 - https://doi.org/10.1039/d1ma00441g SN - 2633-5409 VL - 2 IS - 15 SP - 5203 EP - 5212 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Xu, Xun A1 - Nie, Yan A1 - Wang, Weiwei A1 - Ma, Nan A1 - Lendlein, Andreas T1 - Periodic thermomechanical modulation of toll-like receptor expression and distribution in mesenchymal stromal cells JF - MRS communications / a publication of the Materials Research Society N2 - Toll-like receptor (TLR) can trigger an immune response against virus including SARS-CoV-2. TLR expression/distribution is varying in mesenchymal stromal cells (MSCs) depending on their culture environments. Here, to explore the effect of periodic thermomechanical cues on TLRs, thermally controlled shape-memory polymer sheets with programmable actuation capacity were created. The proportion of MSCs expressing SARS-CoV-2-associated TLRs was increased upon stimulation. The TLR4/7 colocalization was promoted and retained in the endoplasmic reticula. The TLR redistribution was driven by myosin-mediated F-actin assembly. These results highlight the potential of boosting the immunity for combating COVID-19 via thermomechanical preconditioning of MSCs. KW - Actuation KW - Antiviral KW - Biomaterial KW - COVID-19 KW - Shape memory Y1 - 2021 U6 - https://doi.org/10.1557/s43579-021-00049-5 SN - 2159-6867 VL - 11 IS - 4 SP - 425 EP - 431 PB - Springer CY - Berlin ER - TY - JOUR A1 - Schulze, Nicole A1 - Koetz, Joachim T1 - Kinetically controlled growth of gold nanotriangles in a vesicular template phase by adding a strongly alternating polyampholyte JF - Journal of dispersion science and technology N2 - This paper is focused on the temperature-dependent synthesis of gold nanotriangles in a vesicular template phase, containing phosphatidylcholine and AOT, by adding the strongly alternating polyampholyte PalPhBisCarb. UV-vis absorption spectra in combination with TEM micrographs show that flat gold nanoplatelets are formed predominantly in the presence of the polyampholyte at 45°C. The formation of triangular and hexagonal nanoplatelets can be directly influenced by the kinetic approach, i.e., by varying the polyampholyte dosage rate at 45°C. Corresponding zeta potential measurements indicate that a temperature-dependent adsorption of the polyampholyte on the {111} faces will induce the symmetry breaking effect, which is responsible for the kinetically controlled hindered vertical and preferred lateral growth of the nanoplatelets. KW - Kinetically controlled nanocrystal growth KW - nanotriangles KW - polyampholytes Y1 - 2016 U6 - https://doi.org/10.1080/01932691.2016.1220318 SN - 0193-2691 SN - 1532-2351 VL - 38 IS - 8 SP - 1073 EP - 1078 PB - Taylor & Francis CY - Philadelphia ER - TY - THES A1 - Margraf, Johannes T. T1 - Science-driven chemical machine learning Y1 - 2023 ER - TY - JOUR A1 - Deng, Zijun A1 - Wang, Weiwei A1 - Xu, Xun A1 - Ma, Nan A1 - Lendlein, Andreas T1 - Polydopamine-based biofunctional substrate coating promotes mesenchymal stem cell migration JF - MRS advances : a journal of the Materials Research Society (MRS) N2 - Rapid migration of mesenchymal stem cells (MSCs) on device surfaces could support in vivo tissue integration and might facilitate in vitro organoid formation. Here, polydopamine (PDA) is explored as a biofunctional coating to effectively promote MSC motility. It is hypothesized that PDA stimulates fibronectin deposition and in this way enhances integrin-mediated migration capability. The random and directional cell migration was investigated by time-lapse microscopy and gap closure assay respectively, and analysed with softwares as computational tools. A higher amount of deposited fibronectin was observed on PDA substrate, compared to the non-coated substrate. The integrin beta 1 activation and focal adhesion kinase (FAK) phosphorylation at Y397 were enhanced on PDA substrate, but the F-actin cytoskeleton was not altered, suggesting MSC migration on PDA was regulated by integrin initiated FAK signalling. This study strengthens the biofunctionality of PDA coating for regulating stem cells and offering a way of facilitating tissue integration of devices. Y1 - 2021 U6 - https://doi.org/10.1557/s43580-021-00091-4 SN - 2059-8521 VL - 6 IS - 31 SP - 739 EP - 744 PB - Springer Nature Switzerland AG CY - Cham ER -