TY  - GEN
A1  - Kirchartz, Thomas
A1  - Márquez, José A.
A1  - Stolterfoht, Martin
A1  - Unold, Thomas
T1  - Photoluminescence-based characterization of halide perovskites for photovoltaics
T2  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Photoluminescence spectroscopy is a widely applied characterization technique for semiconductor materials in general and halide perovskite solar cell materials in particular. It can give direct information on the recombination kinetics and processes as well as the internal electrochemical potential of free charge carriers in single semiconductor layers, layer stacks with transport layers, and complete solar cells. The correct evaluation and interpretation of photoluminescence requires the consideration of proper excitation conditions, calibration and application of the appropriate approximations to the rather complex theory, which includes radiative recombination, non-radiative recombination, interface recombination, charge transfer, and photon recycling. In this article, an overview is given of the theory and application to specific halide perovskite compositions, illustrating the variables that should be considered when applying photoluminescence analysis in these materials.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1419 
KW  - metal halide perovskites
KW  - numerical simulations
KW  - photoluminescence
KW  - photon recycling
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-519702
SN  - 1866-8372
IS  - 26
ER  - 
TY  - JOUR
A1  - Kirchartz, Thomas
A1  - Márquez, José A.
A1  - Stolterfoht, Martin
A1  - Unold, Thomas
T1  - Photoluminescence-based characterization of halide perovskites for photovoltaics
JF  - Advanced Energy Materials
N2  - Photoluminescence spectroscopy is a widely applied characterization technique for semiconductor materials in general and halide perovskite solar cell materials in particular. It can give direct information on the recombination kinetics and processes as well as the internal electrochemical potential of free charge carriers in single semiconductor layers, layer stacks with transport layers, and complete solar cells. The correct evaluation and interpretation of photoluminescence requires the consideration of proper excitation conditions, calibration and application of the appropriate approximations to the rather complex theory, which includes radiative recombination, non-radiative recombination, interface recombination, charge transfer, and photon recycling. In this article, an overview is given of the theory and application to specific halide perovskite compositions, illustrating the variables that should be considered when applying photoluminescence analysis in these materials.
KW  - metal halide perovskites
KW  - numerical simulations
KW  - photoluminescence
KW  - photon recycling
Y1  - 2020
U6  - https://doi.org/10.1002/aenm.201904134
SN  - 1614-6832
SN  - 1614-6840
VL  - 10
IS  - 26
SP  - 1
EP  - 21
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - GEN
A1  - Stolterfoht, Martin
A1  - Grischek, Max
A1  - Caprioglio, Pietro
A1  - Wolff, Christian Michael
A1  - Gutierrez-Partida, Emilio
A1  - Peña-Camargo, Francisco
A1  - Rothhardt, Daniel
A1  - Zhang, Shanshan
A1  - Raoufi, Meysam
A1  - Wolansky, Jakob
A1  - Abdi-Jalebi, Mojtaba
A1  - Stranks, Samuel D.
A1  - Albrecht, Steve
A1  - Kirchartz, Thomas
A1  - Neher, Dieter
T1  - How to quantify the efficiency potential of neat perovskite films
BT  - Perovskite semiconductors with an implied efficiency exceeding 28%
T2  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe
N2  - Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1-sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non-radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open-circuit voltage and the internal quasi-Fermi level splitting (QFLS), the transport resistance-free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity-dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non-radiative fill factor and open-circuit voltage loss. It is found that potassium-passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
T3  - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1434 
KW  - non-radiative interface recombination
KW  - perovskite solar cells
KW  - photoluminescence
Y1  - 2020
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-516622
SN  - 1866-8372
IS  - 17
ER  - 
TY  - JOUR
A1  - Stolterfoht, Martin
A1  - Grischek, Max
A1  - Caprioglio, Pietro
A1  - Wolff, Christian Michael
A1  - Gutierrez-Partida, Emilio
A1  - Peña-Camargo, Francisco
A1  - Rothhardt, Daniel
A1  - Zhang, Shanshan
A1  - Raoufi, Meysam
A1  - Wolansky, Jakob
A1  - Abdi-Jalebi, Mojtaba
A1  - Stranks, Samuel D.
A1  - Albrecht, Steve
A1  - Kirchartz, Thomas
A1  - Neher, Dieter
T1  - How to quantify the efficiency potential of neat perovskite films
BT  - Perovskite semiconductors with an implied efficiency exceeding 28%
JF  - Advanced Materials
N2  - Perovskite photovoltaic (PV) cells have demonstrated power conversion efficiencies (PCE) that are close to those of monocrystalline silicon cells; however, in contrast to silicon PV, perovskites are not limited by Auger recombination under 1-sun illumination. Nevertheless, compared to GaAs and monocrystalline silicon PV, perovskite cells have significantly lower fill factors due to a combination of resistive and non-radiative recombination losses. This necessitates a deeper understanding of the underlying loss mechanisms and in particular the ideality factor of the cell. By measuring the intensity dependence of the external open-circuit voltage and the internal quasi-Fermi level splitting (QFLS), the transport resistance-free efficiency of the complete cell as well as the efficiency potential of any neat perovskite film with or without attached transport layers are quantified. Moreover, intensity-dependent QFLS measurements on different perovskite compositions allows for disentangling of the impact of the interfaces and the perovskite surface on the non-radiative fill factor and open-circuit voltage loss. It is found that potassium-passivated triple cation perovskite films stand out by their exceptionally high implied PCEs > 28%, which could be achieved with ideal transport layers. Finally, strategies are presented to reduce both the ideality factor and transport losses to push the efficiency to the thermodynamic limit.
KW  - non-radiative interface recombination
KW  - perovskite solar cells
KW  - photoluminescence
Y1  - 2020
U6  - https://doi.org/10.1002/adma.202000080
SN  - 0935-9648
SN  - 1521-4095
VL  - 32
IS  - 17
SP  - 1
EP  - 10
PB  - Wiley-VCH
CY  - Weinheim
ER  -