TY - JOUR A1 - Quan, Ting A1 - Goubard-Bretesche, Nicolas A1 - Haerk, Eneli A1 - Kochovski, Zdravko A1 - Mei, Shilin A1 - Pinna, Nicola A1 - Ballauff, Matthias A1 - Lu, Yan T1 - Highly Dispersible Hexagonal Carbon-MoS2-Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors JF - Chemistry - a European journal N2 - MoS2, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon-MoS2-carbon was successfully synthesized through an L-cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS2 flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m(2) g(-1), a total pore volume of 0.677 cm(3) g(-1), and fairly small mesopores (approximate to 5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g(-1) (0.12 F cm(-2)) at a constant current density of 0.1 Ag-1; thus suggesting that hollow carbon-MoS2 carbon nanoplates are promising candidate materials for supercapacitors. KW - carbon KW - chalcogens KW - electrochemistry KW - nanostructures KW - supercapacitors Y1 - 2019 U6 - https://doi.org/10.1002/chem.201806060 SN - 0947-6539 SN - 1521-3765 VL - 25 IS - 18 SP - 4757 EP - 4766 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Yan, Runyu T1 - Nitrogen-doped and porous carbons towards new energy storage mechanisms for supercapacitors with high energy density T1 - Neuartige Energiespeichermechanismen in porösen und stickstoffdotierten Kohlenstoffen für die Anwendung in Superkondensatoren mit hoher Energiedichte N2 - Supercapacitors are electrochemical energy storage devices with rapid charge/discharge rate and long cycle life. Their biggest challenge is the inferior energy density compared to other electrochemical energy storage devices such as batteries. Being the most widely spread type of supercapacitors, electrochemical double-layer capacitors (EDLCs) store energy by electrosorption of electrolyte ions on the surface of charged electrodes. As a more recent development, Na-ion capacitors (NICs) are expected to be a more promising tactic to tackle the inferior energy density due to their higher-capacity electrodes and larger operating voltage. The charges are simultaneously stored by ion adsorption on the capacitive-type cathode surface and via faradic process in the battery-type anode, respectively. Porous carbon electrodes are of great importance in these devices, but the paramount problems are the facile synthetic routes for high-performance carbons and the lack of fundamental understanding of the energy storage mechanisms. Therefore, the aim of the present dissertation is to develop novel synthetic methods for (nitrogen-doped) porous carbon materials with superior performance, and to reveal a deeper understanding energy storage mechanisms of EDLCs and NICs. The first part introduces a novel synthetic method towards hierarchical ordered meso-microporous carbon electrode materials for EDLCs. The large amount of micropores and highly ordered mesopores endow abundant sites for charge storage and efficient electrolyte transport, respectively, giving rise to superior EDLC performance in different electrolytes. More importantly, the controversial energy storage mechanism of EDLCs employing ionic liquid (IL) electrolytes is investigated by employing a series of porous model carbons as electrodes. The results not only allow to conclude on the relations between the porosity and ion transport dynamics, but also deliver deeper insights into the energy storage mechanism of IL-based EDLCs which is different from the one usually dominating in solvent-based electrolytes leading to compression double-layers. The other part focuses on anodes of NICs, where novel synthesis of nitrogen-rich porous carbon electrodes and their sodium storage mechanism are investigated. Free-standing fibrous nitrogen-doped carbon materials are synthesized by electrospinning using the nitrogen-rich monomer (hexaazatriphenylene-hexacarbonitrile, C18N12) as the precursor followed by condensation at high temperature. These fibers provide superior capacity and desirable charge/discharge rate for sodium storage. This work also allows insights into the sodium storage mechanism in nitrogen-doped carbons. Based on this mechanism, further optimization is done by designing a composite material composed of nitrogen-rich carbon nanoparticles embedded in conductive carbon matrix for a better charge/discharge rate. The energy density of the assembled NICs significantly prevails that of common EDLCs while maintaining the high power density and long cycle life. N2 - Superkondensatoren sind elektrochemische Energiespeicher, die eine hohe Lade-/Entladerate und Zyklensta-bilität aufweisen, deren größte Einschränkung derzeit jedoch bei ihrer im Vergleich zu anderen Speicherlösungen, wie etwa Batterien, geringen Energiedichte liegt. Im am weitesten verbreiteten Superkondensatortyp, dem elektrochemischen Doppelschichtkondensator (engl. electrochemical double-layer capacitor, EDLC), wird die Energie durch Elektrosorption der Elektrolytionen an die geladene Elektrodenoberfläche gespeichert. Der Natrium-Ionen-Kondensator (engl. Na-ion capacitor, NIC) ist eine neuere Entwicklung und löst das Problem der geringen Energiedichte durch Verwendung von Elektroden mit einer höheren Kapazität und Betriebsspannung. Dies wird dadurch erreicht, dass simultan anodenseitig ein faradayscher Prozess und kathodenseitig der Aufbau einer elektrochemischen Doppelschicht genutzt werden. Somit kommen die Vorteile beider Phänomene zum Tragen. Poröse Kohlenstoffelektroden sind wichtig für beide Speichersysteme, wobei die Entwicklung einfacher Syn-theserouten für die Herstellung von Hochleistungskohlenstoffen und der Aufbau eines grundlegenden Ver-ständnisses der dem Energiespeicher zugrunde liegenden Mechanismen die vordergründigen Herausforde-rungen sind. Daher ist es das Ziel der vorliegenden Dissertation, neue Methoden zur Synthese (stickstoffdo-tierter) Kohlenstoffmaterialien mit überlegener Leistung zu erschließen und eine tiefere Einsicht in die me-chanistischen Aspekte der Funktionsweise der eingangs vorgestellten Superkondensatorsysteme zu erhalten. Im ersten Teil der Arbeit wird eine neuartige Synthese von Kohlenstoff-Elektrodenmaterialien für EDLCs vor-gestellt, welche ein hohes Volumen an Mikroporen und hochgeordneten Mesoporen aufweisen. Durch deren Einsatz kann in verschiedenen Elektrolytsystemen eine herausragende Energiedichte erzielt werden. Umso bedeutender sind die Ergebnisse der Untersuchung des kontrovers diskutierten Energiespeichermechanismus in EDLCs mit Elektrolyten auf Basis ionischer Flüssigkeiten (engl. ionic liquids, ILs) und Elektroden aus porösen Modellkohlenstoffen. Aus diesen können nicht nur Rückschlüsse auf den Zusammenhang zwischen Porosität und Ionentransportdynamik gezogen werden, sondern sie lassen auch wichtige Erkenntnisse auf die Mechanismen des Ladungsspeichers in IL-basierten EDLCs zu, welche sich grundlegend von dem in lösungsmittelbasierten Elektrolyten vorherrschenden Mechanismus, der Bildung einer Kompressionsdoppelschicht, unterscheiden. Im zweiten Teil des Werks liegt der Fokus auf der Synthese stickstoffreicher poröser Kohlenstoffelektroden als Anoden für NICs und der Untersuchung der Vorgänge während der Natriumeinlagerung in solchen Syste-men. Freistehende, faserartige und stickstoffdotierte Kohlenstoffmaterialien wurden durch Elektrospinnen des stickstoffreichen Monomers Hexaazatriphenylen-hexacarbonitril (C18N12) gefolgt von dessen Kondensati-on bei hoher Temperatur erhalten. Diese Fasern überzeugen durch überragende Kapazität und eine hohe Lade-/Entladerate beim Natriumspei-chervorgang. In diesem Rahmen wurde auch der Mechanismus der Natriumeinlagerung in stickstoffdotierten Kohlenstoffen beleuchtet und auf Basis dieser Erkenntnisse wurde eine weitere Optimierung vorgenommen. Indem ein Kompositmaterial aus stickstoffreichen Kohlenstoffnanopartikeln in einer leitfähigen Kohlenstoffmatrix erzeugt wurde, konnte die Lade-/Entladerate abermals verbessert werden. Somit übertrifft die Energiedichte der so konstruierten NICs die gewöhnlicher EDLCs, während deren hohe Leistungsdichte und Lebensdauer erhalten bleibt. KW - porous carbons KW - supercapacitors KW - high energy density KW - energy storage mechanism KW - poröse Kohlenstoffe KW - Superkondensatoren KW - hohe Energiedichte KW - Energiespeichermechanismus Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-431413 ER - TY - THES A1 - Schipper, Florian T1 - Biomass derived carbon for new energy storage technologies N2 - The thesis deals with the production and evaluation of porous carbon materials for energy storage technologies, namely super capacitors and lithium sulfur batteries. N2 - Die Doktorarbeit befasst sich mit der Produktion und Evaluierung poröser Kohlenstoffmaterialien für die Anwendung in Energiespeichertechnologien, namentlich Superkondensatoren und Lithiumschwefelbatterien. T2 - Biomasse basierende Kohlenstoffe für neue Energiespeichertechnologien KW - Batterien KW - Superkondensatoren KW - Energiespeicher KW - Lithium-Schwefel-Batterien KW - Kohlenstoff KW - battery KW - supercapacitors KW - energy storage KW - lithium sulfur battery KW - carbon Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72045 ER - TY - THES A1 - Fechler, Nina T1 - Salts as highly diverse porogens : functional ionic liquid-derived carbons and carbon-based composites for energy-related applications T1 - Salze als vielfältige Porogene : funktionelle, ionische Flüssigkeiten basierte Kohlenstoffe und Kohlenstoff basierte Komposite für Energieanwendungen N2 - The present thesis is to be brought into line with the current need for alternative and sustainable approaches toward energy management and materials design. In this context, carbon in particular has become the material of choice in many fields such as energy conversion and storage. Herein, three main topics are covered: 1)An alternative synthesis strategy toward highly porous functional carbons with tunable porosity using ordinary salts as porogen (denoted as “salt templating”) 2)The one-pot synthesis of porous metal nitride containing functional carbon composites 3)The combination of both approaches, enabling the generation of highly porous composites with finely tunable properties All approaches have in common that they are based on the utilization of ionic liquids, salts which are liquid below 100 °C, as precursors. Just recently, ionic liquids were shown to be versatile precursors for the generation of heteroatom-doped carbons since the liquid state and a negligible vapor pressure are highly advantageous properties. However, in most cases the products do not possess any porosity which is essential for many applications. In the first part, “salt templating”, the utilization of salts as diverse and sustainable porogens, is introduced. Exemplarily shown for ionic liquid derived nitrogen- and nitrogen-boron-co-doped carbons, the control of the porosity and morphology on the nanometer scale by salt templating is presented. The studies within this thesis were conducted with the ionic liquids 1-Butyl-3-methyl-pyridinium dicyanamide (Bmp-dca), 1-Ethyl-3-methyl-imidazolium dicyanamide (Emim-dca) and 1 Ethyl 3-methyl-imidazolium tetracyanoborate (Emim-tcb). The materials are generated through thermal treatment of precursor mixtures containing one of the ionic liquids and a porogen salt. By simple removal of the non-carbonizable template salt with water, functional graphitic carbons with pore sizes ranging from micro- to mesoporous and surface areas up to 2000 m2g-1 are obtained. The carbon morphologies, which presumably originate from different onsets of demixing, mainly depend on the nature of the porogen salt whereas the nature of the ionic liquid plays a minor role. Thus, a structural effect of the porogen salt rather than activation can be assumed. This offers an alternative to conventional activation and templating methods, enabling to avoid multiple-step and energy-consuming synthesis pathways as well as employment of hazardous chemicals for the template removal. The composition of the carbons can be altered via the heat-treatment procedure, thus at lower synthesis temperatures rather polymeric carbonaceous materials with a high degree of functional groups and high surface areas are accessible. First results suggest the suitability of the materials for CO2 utilization. In order to further illustrate the potential of ionic liquids as carbon precursors and to expand the class of carbons which can be obtained, the ionic liquid 1-Ethyl-3-methyl-imidazolium thiocyanate (Emim-scn) is introduced for the generation of nitrogen-sulfur-co-doped carbons in combination with the already studied ionic liquids Bmp-dca and Emim-dca. Here, the salt templating approach should also be applicable eventually further illustrating the potential of salt templating, too. In the second part, a one-pot and template-free synthesis approach toward inherently porous metal nitride nanoparticle containing nitrogen-doped carbon composites is presented. Since ionic liquids also offer outstanding solubility properties, the materials can be generated through the carbonization of homogeneous solutions of an ionic liquid acting as nitrogen as well as carbon source and the respective metal precursor. The metal content and surface area are easily tunable via the initial metal precursor amount. Furthermore, it is also possible to synthesize composites with ternary nitride nanoparticles whose composition is adjustable by the metal ratio in the precursor solution. Finally, both approaches are combined into salt templating of the one-pot composites. This opens the way to the one-step synthesis of composites with tunable composition, particle size as well as precisely controllable porosity and morphology. Thereby, common synthesis strategies where the product composition is often negatively affected by the template removal procedure can be avoided. The composites are further shown to be suitable as electrodes for supercapacitors. Here, different properties such as porosity, metal content and particle size are investigated and discussed with respect to their influence on the energy storage performance. Because a variety of ionic liquids, metal precursors and salts can be combined and a simple closed-loop process including salt recycling is imaginable, the approaches present a promising platform toward sustainable materials design. N2 - Die vorliegende Arbeit basiert auf der Notwendigkeit für eine alternative und nachhaltige Energiewirtschaft sowie alternativer Herstellungsmethoden der damit verbundenen Materialien. Hierbei kommt besonders Kohlenstoffen und kohlenstoffbasierten Systemen eine hohe Bedeutung zu. Im Rahmen der Dissertation wurden drei Ansätze verfolgt, die zu der Entwicklung alternativer Strategien zur Herstellung poröser Heteroatom-enthaltender Kohlenstoffe und deren Komposite beitragen. Die Materialien wurden des Weiteren für die CO2 Nutzung sowie Energiespeicherung in Form von Superkondensatoren getestet. Allen Materialien ist gemeinsam, dass sie ausgehend von ionischen Flüssigkeiten, Salze mit einem Schmelzpunkt unterhalb von 100 °C, als Kohlenstoffvorstufe durch Hochtemperaturverfahren hergestellt wurden. Im ersten Teil wird ein alternatives und nachhaltiges Verfahren zur Herstellung hochporöser Stickstoff und Stickstoff-Bor-haltiger Kohlenstoffe vorgestellt. Bei dieser als „Salztemplatierung“ bezeichneten Methode werden herkömmliche Salze als Porogen verwendet. Damit sind sehr hohe Oberflächen erreichbar, die neben der Porengröße und dem Porenvolumen durch die Variation der Salzspezies und Salzmenge einstellbar sind. Dies bietet gegenüber herkömmlichen Templatierungsverfahren den Vorteil, dass das Salz nach erfolgter Karbonisierung der ionischen Flüssigkeit in Anwesenheit der nicht karbonisierbaren Salzspezies einfach mit Wasser auswaschbar ist. Hierbei ist ein Recyclingprozess denkbar. Bei hohen Synthesetemperaturen werden graphitische, bei niedrigen hochfunktionalisierte, polymerartige Produkte erhalten. Letztere erwiesen sich als vielversprechende Materialien für die CO2 Nutzung. Unter Verwendung einer bisher nicht eingesetzten ionische Flüssigkeit konnte weiterhin die Einführung von Schwefel als Heteroatom ermöglicht werden. Im zweiten Teil wird eine Templat-freie Einschrittsynthese von porösen Kompositen aus Metallnitrid Nanopartikeln und Stickstoff-dotiertem Kohlenstoff vorgestellt. Die Materialien werden ausgehend von einer Lösung aus einer ionischen Flüssigkeit und einem Metallvorläufer hergestellt, wobei die ionische Flüssigkeit sowohl als Kohlenstoffvorläufer als auch als Stickstoffquelle für die Metallnitride dient. Der Metallgehalt, das Metallverhältnis in ternären Nitriden und die Oberfläche sind über den Anteil des Metallvorläufers einstellbar. Schließlich werden beide Ansätze zur Salztemplatierung von den Kompositen kombiniert. Dadurch wird die Einschrittsynthese von Kompositen mit einstellbarer Oberfläche, Zusammensetzung, Partikelgröße und Morphologie ermöglicht. Diese Materialien wurden schließlich als Elektroden für Superkondensatoren getestet und der Einfluss verschiedener Parameter auf die Leistungsfähigkeit untersucht. Aufgrund verschiedener Kombinationsmöglichkeiten von ionischen Flüssigkeiten, Metallvorläufern und Salzen, stellen die hier präsentierten Ansätze eine vielversprechende Plattform für die nachhaltige Materialsynthese dar. KW - Salze KW - Poröse Materialien KW - Heteroatom-dotierte Kohlenstoffe KW - Metallnitrid-Kohlenstoff Komposite KW - Superkondensator KW - Salts KW - porous materials KW - heteroatom-doped carbons KW - metal nitride carbon composites KW - supercapacitors Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-64775 ER -