TY - JOUR A1 - Wu, Lei A1 - Glebe, Ulrich A1 - Böker, Alexander T1 - Fabrication of Thermoresponsive Plasmonic Core-Satellite Nanoassemblies with a Tunable Stoichiometry via Surface-Initiated Reversible Addition-Fragmentation Chain Transfer Polymerization from Silica Nanoparticles JF - Advanced materials interfaces N2 - This work presents a fabrication of thermoresponsive plasmonic core-satellite nanoassemblies. The structure has a silica nanoparticle core surrounded by gold nanoparticle satellites using thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) chains as scaffolds. The thiol-terminated PNIPAM shell is densely grafted on the silica core via surface-initiated reversible addition-fragmentation chain transfer polymerization and used to anchor numerous gold nanoparticle satellites with a tunable stoichiometry. Below and above lower critical solution temperature, the chain conformation of PNIPAM reversibly changes between swollen and shrunken state. The reversible change of the polymer size varies the refractive index of the local medium surrounding the satellites and the distance between them. The two effects together lead to the thermoresponsive plasmonic properties of the nanoassemblies. Under different satellite densities, two distinctive plasmonic features appear. KW - gold KW - hybrid materials KW - polymeric materials KW - silica KW - surface plasmon resonance Y1 - 2017 U6 - https://doi.org/10.1002/admi.201700092 SN - 2196-7350 VL - 4 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Weiler, Markus A1 - Menzel, Christoph A1 - Pertsch, Thomas A1 - Alaee, Rasoul A1 - Rockstuhl, Carsten A1 - Pacholski, Claudia T1 - Bottom-Up Fabrication of Hybrid Plasmonic Sensors: Gold-Capped Hydrogel Microspheres Embedded in Periodic Metal Hole Arrays JF - Polymer : the international journal for the science and technology of polymers N2 - The high potential of bottom-up fabrication strategies for realizing sophisticated optical sensors combining the high sensitivity of a surface plasmon resonance with the exceptional properties of stimuli-responsive hydrogel is demonstrated. The sensor is composed of a periodic hole array in a gold film whose holes are filled with gold-capped poly(N-isoproyl-acrylamide) (polyNIPAM) microspheres. The production of this sensor relies on a pure chemical approach enabling simple, time-efficient, and cost-efficient preparation of sensor platforms covering areas of cm(2). The transmission spectrum of this plasmonic sensor shows a strong interaction between propagating surface plasmon polaritons at the metal film surface and localized surface plasmon resonance of the gold cap on top of the polyNIPAM microspheres. Computer simulations support this experimental observation. These interactions lead to distinct changes in the transmission spectrum, which allow for the simultaneous, sensitive optical detection of refractive index changes in the surrounding medium and the swelling state of the embedded polyNIPAM microsphere under the gold cap. The volume of the polyNIPAM microsphere located underneath the gold cap can be changed by certain stimuli such as temperature, pH, ionic strength, and distinct molecules bound to the hydrogel matrix facilitating the detection of analytes which do not change the refractive index of the surrounding medium significantly. KW - bottom-up KW - hydrogel KW - hole array KW - sensor KW - surface plasmon resonance Y1 - 2016 U6 - https://doi.org/10.1021/acsami.6b08636 SN - 1944-8244 VL - 8 SP - 26392 EP - 26399 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Rosencrantz, Sophia A1 - Tang, Jo Sing Julia A1 - Schulte-Osseili, Christine A1 - Böker, Alexander A1 - Rosencrantz, Ruben R. T1 - Glycopolymers by RAFT Polymerization as Functional Surfaces for Galectin-3 JF - Macromolecular chemistry and physics N2 - Glycan-protein interactions are essential biological processes with many disease-related modulations and variations. One of the key proteins involved in tumor progression and metastasis is galectin-3 (Gal-3). A lot of effort is put into the development of Gal-3 inhibitors as new therapeutic agents. The avidity of glycan-protein interactions is strongly enhanced by multivalent ligand presentation. Multivalent presentation of glycans can be accomplished by utilizing glycopolymers, which are polymers with pendent glycan groups. For the production of glycopolymers, glycomonomers are synthesized by a regioselective, microwave-assisted approach starting from lactose. The resulting methacrylamide derivatives are polymerized by RAFT and immobilized on gold surfaces using the trithiocarbonate group of the chain transfer agent. Surface plasmon resonance spectroscopy enables the label free kinetic characterization of Gal-3 binding to these multivalent glycopolymers. The measurements indicate oligomerization of Gal-3 upon exposure to multivalent environments and reveal strong specific interaction with the immobilized polymers. KW - galectin-3 KW - glycopolymers KW - multivalency KW - RAFT KW - surface plasmon resonance Y1 - 2019 U6 - https://doi.org/10.1002/macp.201900293 SN - 1022-1352 SN - 1521-3935 VL - 220 IS - 20 PB - Wiley-VCH CY - Weinheim ER - TY - GEN A1 - Kunstmann, Ruth Sonja A1 - Engström, Olof A1 - Wehle, Marko A1 - Widmalm, Göran A1 - Santer, Mark A1 - Barbirz, Stefanie T1 - Increasing the affinity of an O-Antigen polysaccharide binding site in Shigella flexneri bacteriophage Sf6 tailspike protein T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Broad and unspecific use of antibiotics accelerates spread of resistances. Sensitive and robust pathogen detection is thus important for a more targeted application. Bacteriophages contain a large repertoire of pathogen-binding proteins. These tailspike proteins (TSP) often bind surface glycans and represent a promising design platform for specific pathogen sensors. We analysed bacteriophage Sf6 TSP that recognizes the O-polysaccharide of dysentery-causing Shigella flexneri to develop variants with increased sensitivity for sensor applications. Ligand polyrhamnose backbone conformations were obtained from 2D H-1,H-1-trNOESY NMR utilizing methine-methine and methine-methyl correlations. They agreed well with conformations obtained from molecular dynamics (MD), validating the method for further predictions. In a set of mutants, MD predicted ligand flexibilities that were in good correlation with binding strength as confirmed on immobilized S. flexneri O-polysaccharide (PS) with surface plasmon resonance. In silico approaches combined with rapid screening on PS surfaces hence provide valuable strategies for TSP-based pathogen sensor design. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1417 KW - carbohydrates KW - molecular dynamics simulations KW - NMR spectroscopy KW - protein-carbohydrate interactions KW - surface plasmon resonance Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-519418 SN - 1866-8372 IS - 32 ER - TY - JOUR A1 - Hüttl, Christine A1 - Hettrich, Cornelia A1 - Riedel, Melanie A1 - Henklein, Petra A1 - Rawel, Harshadrai Manilal A1 - Bier, Frank Fabian T1 - Development of Peptidyl Lysine Dendrons: 1,3-Dipolar Cycloaddition for Peptide Coupling and Antibody Recognition JF - Chemical biology & drug design N2 - A straightforward synthesis strategy to multimerize a peptide mimotopes for antibody B13-DE1 recognition is described based on lysine dendrons as multivalent scaffolds. Lysine dendrons that possess N-terminal alkyne residues at the periphery were quantitative functionalized with azido peptides using click chemistry. The solid-phase peptide synthesis (SPPS) allows preparing the peptide dendron in high purity and establishing the possibility of automation. The presented peptide dendron is a promising candidate as multivalent ligand and was used for antibody B13-DE1 recognition. The binding affinity increases with higher dendron generation without loss of specificity. The analysis of biospecific interaction between the synthesized peptide dendron and the antibody was done via surface plasmon resonance (SPR) technique. The presented results show a promising tool for investigations of antigen-antibody reactions. KW - click chemistry KW - lysine dendron KW - peptide mimotopes KW - solid-phase peptide synthesis KW - surface plasmon resonance Y1 - 2015 U6 - https://doi.org/10.1111/cbdd.12444 SN - 1747-0277 SN - 1747-0285 VL - 85 IS - 5 SP - 565 EP - 573 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Hovestaedt, Marc A1 - Memczak, Henry A1 - Pleiner, Dennis A1 - Zhang, Xin A1 - Rappich, Joerg A1 - Bier, Frank Fabian A1 - Stöcklein, Walter F. M. T1 - Characterization of a new maleimido functionalization of gold for surface plasmon resonance spectroscopy JF - Journal of molecular recognition : an international journal devoted to research on specific molecular recognition in chemistry, biology, biotechnology and medicine N2 - Para-maleimidophenyl (p-MP) modified gold surfaces have been prepared by one-step electrochemical deposition and used in surface plasmon resonance (SPR) studies. Therefore, a FITC mimotope peptide (MP1, 12 aa), a human mucin 1 epitope peptide (MUC, 9 aa) and a protein with their specific antibodies were used as model systems. The peptides were modified with an N-terminal cysteine for covalent and directed coupling to the maleimido functionalized surface by means of Michael addition. The coupling yield of the peptide, the binding characteristics of antibody and the unspecific adsorption of the analytes were investigated. The results expand the spectrum of biosensors usable with p-MP by widely used SPR and support its potential to be versatile for several electrochemical and optical biosensors. This allows the combination of an electrochemical and optical read-out for a broad variety of biomolecular interactions on the same chip. Copyright (c) 2014 John Wiley & Sons, Ltd. KW - biosensor KW - surface plasmon resonance KW - diazonium coupling KW - maleimidophenyl KW - cys-peptide KW - aryl diazonium salts Y1 - 2014 U6 - https://doi.org/10.1002/jmr.2396 SN - 0952-3499 SN - 1099-1352 VL - 27 IS - 12 SP - 707 EP - 713 PB - Wiley-Blackwell CY - Hoboken ER - TY - JOUR A1 - Fandrich, Artur A1 - Buller, Jens A1 - Wischerhoff, Erik A1 - Laschewsky, André A1 - Lisdat, Fred T1 - Electrochemical detection of the thermally induced phase transition of a thin stimuli-responsive polymer film JF - ChemPhysChem : a European journal of chemical physics and physical chemistry KW - cyclic voltammetry KW - electrochemical impedance spectroscopy KW - polymers KW - surface chemistry KW - surface plasmon resonance Y1 - 2012 U6 - https://doi.org/10.1002/cphc.201100924 SN - 1439-4235 VL - 13 IS - 8 SP - 2020 EP - 2023 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Balderas-Valadez, Ruth Fabiola A1 - Schürmann, Robin Mathis A1 - Pacholski, Claudia T1 - One Spot-Two Sensors: Porous Silicon Interferometers in Combination With Gold Nanostructures Showing Localized Surface Plasmon Resonance JF - Frontiers in chemistry N2 - Sensors composed of a porous silicon monolayer covered with a film of nanostructured gold layer, which provide two optical signal transduction methods, are fabricated and thoroughly characterized concerning their sensing performance. For this purpose, silicon substrates were electrochemically etched in order to obtain porous silicon monolayers, which were subsequently immersed in gold salt solution facilitating the formation of a porous gold nanoparticle layer on top of the porous silicon. The deposition process was monitored by reflectance spectroscopy, and the appearance of a dip in the interference pattern of the porous silicon layer was observed. This dip can be assigned to the absorption of light by the deposited gold nanostructures leading to localized surface plasmon resonance. The bulk sensitivity of these sensors was determined by recording reflectance spectra in media having different refractive indices and compared to sensors exclusively based on porous silicon or gold nanostructures. A thorough analysis of resulting shifts of the different optical signals in the reflectance spectra on the wavelength scale indicated that the optical response of the porous silicon sensor is not influenced by the presence of a gold nanostructure on top. Moreover, the adsorption of thiol-terminated polystyrene to the sensor surface was solely detected by changes in the position of the dip in the reflectance spectrum, which is assigned to localized surface plasmon resonance in the gold nanostructures. The interference pattern resulting from the porous silicon layer is not shifted to longer wavelengths by the adsorption indicating the independence of the optical response of the two nanostructures, namely porous silicon and nanostructured gold layer, to refractive index changes and pointing to the successful realization of two sensors in one spot. KW - porous silicon KW - interferometry KW - gold nanostructures KW - surface plasmon resonance KW - optical sensor Y1 - 2019 U6 - https://doi.org/10.3389/fchem.2019.00593 SN - 2296-2646 VL - 7 PB - Frontiers Research Foundation CY - Lausanne ER - TY - JOUR A1 - Balderas-Valadez, Ruth Fabiola A1 - Pacholski, Claudia T1 - Plasmonic Nanohole Arrays on Top of Porous Silicon Sensors BT - A Win-Win Situation JF - ACS applied materials & interfaces N2 - Label-free optical sensors are attractive candidates, for example, for detecting toxic substances and monitoring biomolecular interactions. Their performance can be pushed by the design of the sensor through clever material choices and integration of components. In this work, two porous materials, namely, porous silicon and plasmonic nanohole arrays, are combined in order to obtain increased sensitivity and dual-mode sensing capabilities. For this purpose, porous silicon monolayers are prepared by electrochemical etching and plasmonic nanohole arrays are obtained using a bottom-up strategy. Hybrid sensors of these two materials are realized by transferring the plasmonic nanohole array on top of the porous silicon. Reflectance spectra of the hybrid sensors are characterized by a fringe pattern resulting from the Fabry–Pérot interference at the porous silicon borders, which is overlaid with a broad dip based on surface plasmon resonance in the plasmonic nanohole array. In addition, the hybrid sensor shows a significant higher reflectance in comparison to the porous silicon monolayer. The sensitivities of the hybrid sensor to refractive index changes are separately determined for both components. A significant increase in sensitivity from 213 ± 12 to 386 ± 5 nm/RIU is determined for the transfer of the plasmonic nanohole array sensors from solid glass substrates to porous silicon monolayers. In contrast, the spectral position of the interference pattern of porous silicon monolayers in different media is not affected by the presence of the plasmonic nanohole array. However, the changes in fringe pattern reflectance of the hybrid sensor are increased 3.7-fold after being covered with plasmonic nanohole arrays and could be used for high-sensitivity sensing. Finally, the capability of the hybrid sensor for simultaneous and independent dual-mode sensing is demonstrated. KW - optical sensors KW - porous silicon KW - surface plasmon resonance KW - plasmonic KW - nanohole arrays KW - bottom-up fabrication Y1 - 2021 U6 - https://doi.org/10.1021/acsami.1c07034 SN - 1944-8244 SN - 1944-8252 VL - 13 IS - 30 SP - 36436 EP - 36444 PB - American Chemical Society CY - Washington ER -