TY - JOUR A1 - Wang, Ningzhen A1 - Daniels, Robert A1 - Connelly, Liam A1 - Sotzing, Michael A1 - Wu, Chao A1 - Gerhard, Reimund A1 - Sotzing, Gregory A. A1 - Cao, Yang T1 - All-organic flexible ferroelectret nanogenerator with fabric-based electrodes for self-powered body area networks JF - Small : nano micro N2 - Due to their electrically polarized air-filled internal pores, optimized ferroelectrets exhibit a remarkable piezoelectric response, making them suitable for energy harvesting. Expanded polytetrafluoroethylene (ePTFE) ferroelectret films are laminated with two fluorinated-ethylene-propylene (FEP) copolymer films and internally polarized by corona discharge. Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)-coated spandex fabric is employed for the electrodes to assemble an all-organic ferroelectret nanogenerator (FENG). The outer electret-plus-electrode double layers form active device layers with deformable electric dipoles that strongly contribute to the overall piezoelectric response in the proposed concept of wearable nanogenerators. Thus, the FENG with spandex electrodes generates a short-circuit current which is twice as high as that with aluminum electrodes. The stacking sequence spandex/FEP/ePTFE/FEP/ePTFE/FEP/spandex with an average pore size of 3 mu m in the ePTFE films yields the best overall performance, which is also demonstrated by the displacement-versus-electric-field loop results. The all-organic FENGs are stable up to 90 degrees C and still perform well 9 months after being polarized. An optimized FENG makes three light emitting diodes (LEDs) blink twice with the energy generated during a single footstep. The new all-organic FENG can thus continuously power wearable electronic devices and is easily integrated, for example, with clothing, other textiles, or shoe insoles. KW - all-organic ferroelectret nanogenerator (FENG) KW - all-organic KW - piezoelectric nanogenerator (PENG) KW - expanded polytetrafluoroethylene KW - ferroelectret KW - micro-energy harvesting KW - (PEDOT KW - PSS)-coated porous KW - fabric electrodes KW - wearable electronics Y1 - 2021 U6 - https://doi.org/10.1002/smll.202103161 SN - 1613-6810 SN - 1613-6829 VL - 17 IS - 33 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Zhang, Xiaoqing A1 - Zhang, Xinwu A1 - You, Qiong A1 - Sessler, Gerhard M. T1 - Low- cost, large- area, stretchable piezoelectric films based on irradiation- crosslinked poly ( propylene) JF - Macromolecular materials and engineering N2 - Low cost, large area, lightweight, stretchable piezoelectric films, based on space-charge electret with a foam structure (i.e., ferroelectrets or piezoelectrets), have been fabricated by using commercially available irradiation cross-linked poly(propylene) (IXPP) foam sheets. Piezoelectric d(33) coefficients are as high as 100pCN(-1). The piezoelectric performance in such IXPP films is well preserved for repeated strains of less than 10%. Piezoelectric d(33) coefficients are frequency independent in the range from 2 to 100Hz. Such new class materials may be applied in sensory skins, smart clothing, bio-inspired systems, microenergy harvesters, and so on. KW - crosslinked poly(propylene) KW - ferroelectret KW - piezoelectricity KW - stretchability Y1 - 2014 U6 - https://doi.org/10.1002/mame.201300161 SN - 1438-7492 SN - 1439-2054 VL - 299 IS - 3 SP - 290 EP - 295 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Fang, Peng A1 - Hollaender, Lars A1 - Wirges, Werner A1 - Gerhard, Reimund T1 - Piezoelectric d(33) coefficients in foamed and layered polymer piezoelectrets from dynamic mechano-electrical experiments, electro-mechanical resonance spectroscopy and acoustic-transducer measurements JF - Measurement science and technology N2 - Piezoelectrets are novel transducer materials which can be widely applied in sensors and actuators. Here, three techniques for determining piezoelectric d(33) coefficients of piezoelectrets are reviewed and compared. Two types of piezoelectrets, polyethylene-naphthalate (PEN) polymer-foam piezoelectrets and fluorinated ethylene-propylene (FEP) copolymer-layer piezoelectrets, have been prepared and measured by means of dynamic, resonance, and acoustical methods. The dynamic measurements show that the d(33) coefficient of PEN-foam samples clearly decreases with increasing stress, but 80% of the initial d(33) can be retained after 1800 cycles of a continuous dynamic measurement in a mechanical fatigue test. The resonance measurements demonstrate that both PEN-foam and FEP-layer samples exhibit clear electro-mechanical resonances. PEN-foam samples show elastic moduli in the range from 1 to 12 MPa and d(33) values up to 500 pC N-1, while FEP-layer samples show homogeneous elastic moduli of about 0.3 MPa and d(33) values of about 280 pC N-1. The acoustical measurements reveal that both PEN-foam and FEP-layer samples exhibit stable frequency responses in the range from 5.7 to 20 kHz. In addition, d(33) coefficients obtained with different experimental methods are in good agreement with each other, which confirms the reliability of all three techniques. KW - piezoelectret KW - ferroelectret KW - dielectric resonance spectroscopy KW - piezoelectric measurements KW - acoustic-transducer materials KW - polyethylene naphthalate (PEN) KW - fluorinated ethylene-propylene copolymer (FEP) Y1 - 2012 U6 - https://doi.org/10.1088/0957-0233/23/3/035604 SN - 0957-0233 VL - 23 IS - 3 PB - IOP Publ. Ltd. CY - Bristol ER -