TY - THES A1 - Koppitz, Michael T1 - Numerical studies of Black Hole initial data N2 - Diese Doktorarbeit behandelt neue Methoden der numerischen Evolution von Systemen mit binären Schwarzen Löchern. Wir analysieren und vergleichen Evolutionen von verschiedenen physikalisch motivierten Anfangsdaten und zeigen Resultate der ersten Evolution von so genannten 'Thin Sandwich' Daten, die von der Gruppe in Meudon entwickelt wurden. Zum ersten Mal wurden zwei verschiedene Anfangsdaten anhand von dreidimensionalen Evolutionen verglichen: die Puncture-Daten und die Thin-Sandwich Daten. Diese zwei Datentypen wurden im Hinblick auf die physikalischen Eigenschaften während der Evolution verglichen. Die Evolutionen zeigen, dass die Meudon Daten im Vergleich zu Puncture Daten wesentlich mehr Zeit benötigen bevor sie kollidieren. Dies deutet auf eine bessere Abschätzung der Parameter hin. Die Kollisionszeiten der numerischen Evolutionen sind konsistent mit unabhängigen Schätzungen basierend auf Post-Newtonschen Näherungen die vorhersagen, dass die Schwarzen Löcher ca. 60% eines Orbits rotieren bevor sie kollidieren. N2 - This thesis presents new approaches to evolutions of binary black hole systems in numerical relativity. We analyze and compare evolutions from various physically motivated initial data sets, in particular presenting the first evolutions of Thin Sandwich data generated by the Meudon group. For the first time two different quasi-circular orbit initial data sequences are compared through fully 3d numerical evolutions: Puncture data and Thin Sandwich data (TSD) based on a helical killing vector ansatz. The two different sets are compared in terms of the physical quantities that can be measured from the numerical data, and in terms of their evolutionary behavior. The evolutions demonstrate that for the latter, "Meudon" datasets, the black holes do in fact orbit for a longer amount of time before they merge, in comparison with Puncture data from the same separation. This indicates they are potentially better estimates of quasi-circular orbit parameters. The merger times resulting from the numerical simulations are consistent with independent Post-Newtonian estimates that the final plunge phase of a black hole inspiral should take 60% of an orbit. KW - numerische Relativiät KW - binäre schwarze Löcher KW - Anfangsdaten KW - Evolutionen KW - numerical relativity KW - binary black holes KW - initial data KW - evolutions Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001245 ER - TY - THES A1 - Zillmer, Rüdiger T1 - Statistical properties and scaling of the Lyapunov exponents in stochastic systems N2 - Die vorliegende Arbeit umfaßt drei Abhandlungen, welche allgemein mit einer stochastischen Theorie für die Lyapunov-Exponenten befaßt sind. Mit Hilfe dieser Theorie werden universelle Skalengesetze untersucht, die in gekoppelten chaotischen und ungeordneten Systemen auftreten. Zunächst werden zwei zeitkontinuierliche stochastische Modelle für schwach gekoppelte chaotische Systeme eingeführt, um die Skalierung der Lyapunov-Exponenten mit der Kopplungsstärke ('coupling sensitivity of chaos') zu untersuchen. Mit Hilfe des Fokker-Planck-Formalismus werden Skalengesetze hergeleitet, die von Ergebnissen numerischer Simulationen bestätigt werden. Anschließend wird gezeigt, daß 'coupling sensitivity' im Fall gekoppelter ungeordneter Ketten auftritt, wobei der Effekt sich durch ein singuläres Anwachsen der Lokalisierungslänge äußert. Numerische Ergebnisse für gekoppelte Anderson-Modelle werden bekräftigt durch analytische Resultate für gekoppelte raumkontinuierliche Schrödinger-Gleichungen. Das resultierende Skalengesetz für die Lokalisierungslänge ähnelt der Skalierung der Lyapunov-Exponenten gekoppelter chaotischer Systeme. Schließlich wird die Statistik der exponentiellen Wachstumsrate des linearen Oszillators mit parametrischem Rauschen studiert. Es wird gezeigt, daß die Verteilung des zeitabhängigen Lyapunov-Exponenten von der Normalverteilung abweicht. Mittels der verallgemeinerten Lyapunov-Exponenten wird der Parameterbereich bestimmt, in welchem die Abweichungen von der Normalverteilung signifikant sind und Multiskalierung wesentlich wird. N2 - This work incorporates three treatises which are commonly concerned with a stochastic theory of the Lyapunov exponents. With the help of this theory universal scaling laws are investigated which appear in coupled chaotic and disordered systems. First, two continuous-time stochastic models for weakly coupled chaotic systems are introduced to study the scaling of the Lyapunov exponents with the coupling strength (coupling sensitivity of chaos). By means of the the Fokker-Planck formalism scaling relations are derived, which are confirmed by results of numerical simulations. Next, coupling sensitivity is shown to exist for coupled disordered chains, where it appears as a singular increase of the localization length. Numerical findings for coupled Anderson models are confirmed by analytic results for coupled continuous-space Schrödinger equations. The resulting scaling relation of the localization length resembles the scaling of the Lyapunov exponent of coupled chaotic systems. Finally, the statistics of the exponential growth rate of the linear oscillator with parametric noise are studied. It is shown that the distribution of the finite-time Lyapunov exponent deviates from a Gaussian one. By means of the generalized Lyapunov exponents the parameter range is determined where the non-Gaussian part of the distribution is significant and multiscaling becomes essential. KW - Lyapunov-Exponenten KW - Chaos KW - ungeordnete Systeme KW - Lokalisierung KW - stochastische Systeme KW - 'coupling sensitivity' KW - parametrisch erregter Oszillator KW - Lyapunov exponents KW - chaos KW - disordered systems KW - localization KW - stochastic systems KW - coupling sensitivity KW - parametrically excited oscillator Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001147 ER - TY - THES A1 - Klessen, Ralf S. T1 - The relation between interstellar turbulence and star formation N2 - Eine der zentralen Fragestellungen der modernen Astrophysik ist es, unser Verständnis fuer die Bildung von Sternen und Sternhaufen in unserer Milchstrasse zu erweitern und zu vertiefen. Sterne entstehen in interstellaren Wolken aus molekularem Wasserstoffgas. In den vergangenen zwanzig bis dreißig Jahren ging man davon aus, dass der Prozess der Sternentstehung vor allem durch das Wechselspiel von gravitativer Anziehung und magnetischer Abstossung bestimmt ist. Neuere Erkenntnisse, sowohl von Seiten der Beobachtung als auch der Theorie, deuten darauf hin, dass nicht Magnetfelder, sondern Überschallturbulenz die Bildung von Sternen in galaktischen Molekülwolken bestimmt. Diese Arbeit fasst diese neuen Überlegungen zusammen, erweitert sie und formuliert eine neue Theorie der Sternentstehung die auf dem komplexen Wechselspiel von Eigengravitation des Wolkengases und der darin beobachteten Überschallturbulenz basiert. Die kinetische Energie des turbulenten Geschwindigkeitsfeldes ist typischerweise ausreichend, um interstellare Gaswolken auf großen Skalen gegen gravitative Kontraktion zu stabilisieren. Auf kleinen Skalen jedoch führt diese Turbulenz zu starken Dichtefluktuationen, wobei einige davon die lokale kritische Masse und Dichte für gravitativen Kollaps überschreiten koennen. Diese Regionen schockkomprimierten Gases sind es nun, aus denen sich die Sterne der Milchstrasse bilden. Die Effizienz und die Zeitskala der Sternentstehung hängt somit unmittelbar von den Eigenschaften der Turbulenz in interstellaren Gaswolken ab. Sterne bilden sich langsam und in Isolation, wenn der Widerstand des turbulenten Geschwindigkeitsfeldes gegen gravitativen Kollaps sehr stark ist. Überwiegt hingegen der Einfluss der Eigengravitation, dann bilden sich Sternen in dichten Gruppen oder Haufen sehr rasch und mit grosser Effizienz. Die Vorhersagungen dieser Theorie werden sowohl auf Skalen einzelner Sternentstehungsgebiete als auch auf Skalen der Scheibe unserer Milchstrasse als ganzes untersucht. Es zu erwarten, dass protostellare Kerne, d.h. die direkten Vorläufer von Sternen oder Doppelsternsystemen, eine hochgradig dynamische Zeitentwicklung aufweisen, und keineswegs quasi-statische Objekte sind, wie es in der Theorie der magnetisch moderierten Sternentstehung vorausgesetzt wird. So muss etwa die Massenanwachsrate junger Sterne starken zeitlichen Schwankungen unterworfen sein, was wiederum wichtige Konsequenzen für die statistische Verteilung der resultierenden Sternmassen hat. Auch auf galaktischen Skalen scheint die Wechselwirkung von Turbulenz und Gravitation maßgeblich. Der Prozess wird hier allerdings noch zusätzlich moduliert durch chemische Prozesse, die die Heizung und Kühlung des Gases bestimmen, und durch die differenzielle Rotation der galaktischen Scheibe. Als wichtigster Mechanismus zur Erzeugung der interstellaren Turbulenz lässt sich die Überlagerung vieler Supernova-Explosionen identifizieren, die das Sterben massiver Sterne begleiten und große Mengen an Energie und Impuls freisetzen. Insgesamt unterstützen die Beobachtungsbefunde auf allen Skalen das Bild der turbulenten, dynamischen Sternentstehung, so wie es in dieser Arbeit gezeichnet wird. N2 - Understanding the formation of stars in galaxies is central to much of modern astrophysics. For several decades it has been thought that the star formation process is primarily controlled by the interplay between gravity and magnetostatic support, modulated by neutral-ion drift. Recently, however, both observational and numerical work has begun to suggest that supersonic interstellar turbulence rather than magnetic fields controls star formation. This review begins with a historical overview of the successes and problems of both the classical dynamical theory of star formation, and the standard theory of magnetostatic support from both observational and theoretical perspectives. We then present the outline of a new paradigm of star formation based on the interplay between supersonic turbulence and self-gravity. Supersonic turbulence can provide support against gravitational collapse on global scales, while at the same time it produces localized density enhancements that allow for collapse on small scales. The efficiency and timescale of stellar birth in Galactic gas clouds strongly depend on the properties of the interstellar turbulent velocity field, with slow, inefficient, isolated star formation being a hallmark of turbulent support, and fast, efficient, clustered star formation occurring in its absence. After discussing in detail various theoretical aspects of supersonic turbulence in compressible self-gravitating gaseous media relevant for star forming interstellar clouds, we explore the consequences of the new theory for both local star formation and galactic scale star formation. The theory predicts that individual star-forming cores are likely not quasi-static objects, but dynamically evolving. Accretion onto these objects will vary with time and depend on the properties of the surrounding turbulent flow. This has important consequences for the resulting stellar mass function. Star formation on scales of galaxies as a whole is expected to be controlled by the balance between gravity and turbulence, just like star formation on scales of individual interstellar gas clouds, but may be modulated by additional effects like cooling and differential rotation. The dominant mechanism for driving interstellar turbulence in star-forming regions of galactic disks appears to be supernovae explosions. In the outer disk of our Milky Way or in low-surface brightness galaxies the coupling of rotation to the gas through magnetic fields or gravity may become important. KW - Sterne KW - Sternentstehung KW - Turbulenz KW - Astrophysik KW - Galaxien KW - interstellare Materie KW - stars KW - star formation KW - turbulence KW - astrophysics KW - galaxies KW - interstellar matter Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001118 ER - TY - THES A1 - Füssel, Hans-Martin T1 - Impacts analysis for inverse integrated assessments of climate change N2 - Diese Dissertation beschreibt die Entwicklung und Anwendung des Klimawirkungsmoduls des ICLIPS-Modells, eines integrierten Modells des Klimawandels ('Integrated Assessment'-Modell). Vorangestellt ist eine Diskussion des gesellschaftspolitischen Kontexts, in dem modellbasiertes 'Integrated Assessment' stattfindet, aus der wichtige Anforderungen an die Spezifikation des Klimawirkungsmoduls abgeleitet werden. Das 'Integrated Assessment' des Klimawandels umfasst eine weiten Bereich von Aktivitäten zur wissenschaftsbasierten Unterstützung klimapolitischer Entscheidungen. Hierbei wird eine Vielzahl von Ansätzen verfolgt, um politikrelevante Informationen über die erwarteten Auswirkungen des Klimawandels zu berücksichtigen. Wichtige Herausforderungen in diesem Bereich sind die große Bandbreite der relevanten räumlichen und zeitlichen Skalen, die multifaktorielle Verursachung vieler 'Klimafolgen', erhebliche wissenschaftliche Unsicherheiten sowie die Mehrdeutigkeit unvermeidlicher Werturteile. Die Entwicklung eines hierarchischen Konzeptmodells erlaubt die Strukturierung der verschiedenen Ansätze sowie die Darstellung eines mehrstufigen Entwicklungsprozesses, der sich in der Praxis und der zu Grunde liegenden Theorie von Studien zur Vulnerabilität hinsichtlich des Klimawandels wiederspiegelt. 'Integrated Assessment'-Modelle des Klimawandels sind wissenschaftliche Werkzeuge, welche eine vereinfachte Beschreibung des gekoppelten Mensch-Klima-Systems enthalten. Die wichtigsten entscheidungstheoretischen Ansätze im Bereich des modellbasierten 'Integrated Assessment' werden im Hinblick auf ihre Fähigkeit zur adäquaten Darstellung klimapolitischer Entscheidungsprobleme bewertet. Dabei stellt der 'Leitplankenansatz' eine 'inverse' Herangehensweise zur Unterstützung klimapolitischer Entscheidungen dar, bei der versucht wird, die Gesamtheit der klimapolitischen Strategien zu bestimmen, die mit einer Reihe von zuvor normativ bestimmten Mindestkriterien (den sogenannten 'Leitplanken') verträglich sind. Dieser Ansatz verbindet bis zu einem gewissen Grad die wissenschaftliche Strenge und Objektivität simulationsbasierter Ansätze mit der Fähigkeit von Optimierungsansätzen, die Gesamtheit aller Entscheidungsoptionen zu berücksichtigen. Das ICLIPS-Modell ist das erste 'Integrated Assessment'-Modell des Klimawandels, welches den Leitplankenansatz implementiert. Die Darstellung von Klimafolgen ist eine wichtige Herausforderung für 'Integrated Assessment'-Modelle des Klimawandels. Eine Betrachtung bestehender 'Integrated Assessment'-Modelle offenbart große Unterschiede in der Berücksichtigung verschiedener vom Klimawandel betroffenen Sektoren, in der Wahl des bzw. der Indikatoren zur Darstellung von Klimafolgen, in der Berücksichtigung nicht-klimatischer Entwicklungen einschließlich gezielter Anpassungsmaßnahmen an den Klimawandel, in der Behandlung von Unsicherheiten und in der Berücksichtigung von 'singulären' Ereignissen. 'Integrated Assessment'-Modelle, die auf einem Inversansatz beruhen, stellen besondere Anforderungen an die Darstellung von Klimafolgen. Einerseits muss der Detaillierungsgrad hinreichend sein, um Leitplanken für Klimafolgen sinnvoll definieren zu können; andererseits muss die Darstellung effizient genug sein, um die Gesamtheit der möglichen klimapolitischen Strategien erkunden zu können. Großräumige Singularitäten können häufig durch vereinfachte dynamische Modelle abgebildet werden. Diese Methode ist jedoch weniger geeignet für reguläre Klimafolgen, bei denen die Bestimmung relevanter Ergebnisse in der Regel die Berücksichtigung der Heterogenität von klimatischen, naturräumlichen und sozialen Faktoren auf der lokalen oder regionalen Ebene erfordert. Klimawirkungsfunktionen stellen sich als die geeignetste Darstellung regulärer Klimafolgen im ICLIPS-Modell heraus. Eine Klimawirkungsfunktion beschreibt in aggregierter Form die Reaktion eines klimasensitiven Systems, wie sie von einem geographisch expliziten Klimawirkungsmodell für eine repräsentative Teilmenge möglicher zukünftiger Entwicklungen simuliert wurde. Die in dieser Arbeit vorgestellten Klimawirkungsfunktionen nutzen die globale Mitteltemperatur sowie die atmosphärische CO2-Konzentration als Prädiktoren für global und regional aggregierte Auswirkungen des Klimawandels auf natürliche Ökosysteme, die landwirtschaftliche Produktion und die Wasserverfügbarkeit. Die Anwendung einer 'Musterskalierungstechnik' ermöglicht hierbei die Berücksichtigung der regionalen und saisonalen Muster des Klimaänderungssignals aus allgemeinen Zirkulationsmodellen, ohne die Effizienz der dynamischen Modellkomponenten zu beeinträchtigen. Bemühungen zur quantitativen Abschätzung zukünftiger Klimafolgen sehen sich bei der Wahl geeigneter Indikatoren in der Regel einem Zielkonflikt zwischen der Relevanz eines Indikators für Entscheidungsträger und der Zuverlässigkeit, mit der dieser bestimmt werden kann, gegenüber. Eine Reihe von nichtmonetären Indikatoren zur aggregierten Darstellung von Klimafolgen in Klimawirkungsfunktionen wird präsentiert, welche eine Balance zwischen diesen beiden Zielen anstreben und gleichzeitig die Beschränkungen berücksichtigen, die sich aus anderen Komponenten des ICLIPS-Modells ergeben. Klimawirkungsfunktionen werden durch verschiedene Typen von Diagrammen visualisiert, welche jeweils unterschiedliche Perspektiven auf die Ergebnismenge der Klimawirkungssimulationen erlauben. Die schiere Anzahl von Klimawirkungsfunktionen verhindert ihre umfassende Darstellung in dieser Arbeit. Ausgewählte Ergebnisse zu Veränderungen in der räumlichen Ausdehnung von Biomen, im landwirtschaftlichen Potential verschiedener Länder und in der Wasserverfügbarkeit in mehreren großen Einzugsgebieten werden diskutiert. Die Gesamtheit der Klimawirkungsfunktionen wird zugänglich gemacht durch das 'ICLIPS Impacts Tool', eine graphische Benutzeroberfläche, die einen bequemen Zugriff auf über 100.000 Klimawirkungsdiagramme ermöglicht. Die technischen Aspekte der Software sowie die zugehörige Datenbasis wird beschrieben. Die wichtigste Anwendung von Klimawirkungsfunktionen ist im 'Inversmodus', wo sie genutzt werden, um Leitplanken zur Begrenzung von Klimafolgen in gleichzeitige Randbedingungen für Variablen aus dem optimierenden ICLIPS-Klima-Weltwirtschafts-Modell zu übersetzen. Diese Übersetzung wird ermöglicht durch Algorithmen zur Bestimmung von Mengen erreichbarer Klimazustände ('reachable climate domains') sowie zur parametrisierten Approximation zulässiger Klimafenster ('admissible climate windows'), die aus Klimawirkungsfunktionen abgeleitet werden. Der umfassende Bestand an Klimawirkungsfunktionen zusammen mit diesen Algorithmen ermöglicht es dem integrierten ICLIPS-Modell, in flexibler Weise diejenigen klimapolitischen Strategien zu bestimmen, welche bestimmte in biophysikalischen Einheiten ausgedrückte Begrenzungen von Klimafolgen explizit berücksichtigen. Diese Möglichkeit bietet kein anderes intertemporal optimierendes 'Integrated Assessment'-Modell. Eine Leitplankenanalyse mit dem integrierten ICLIPS-Modell unter Anwendung ausgewählter Klimawirkungsfunktionen für Veränderungen natürlicher Ökosysteme wird beschrieben. In dieser Analyse werden so genannte 'notwendige Emissionskorridore' berechnet, die vorgegebene Beschränkungen hinsichtlich der maximal zulässigen globalen Vegetationsveränderungen und der regionalen Klimaschutzkosten berücksichtigen. Dies geschieht sowohl für eine 'Standardkombination' der drei gewählten Kriterien als auch für deren systematische Variation. Eine abschließende Diskussion aktueller Entwicklungen in der 'Integrated Assessment'-Modellierung stellt diese Arbeit mit anderen einschlägigen Bemühungen in Beziehung. N2 - This thesis describes the development and application of the impacts module of the ICLIPS model, a global integrated assessment model of climate change. The presentation of the technical aspects of this model component is preceded by a discussion of the sociopolitical context for model-based integrated assessments, which defines important requirements for the specification of the model. Integrated assessment of climate change comprises a broad range of scientific efforts to support the decision-making about objectives and measures for climate policy, whereby many different approaches have been followed to provide policy-relevant information about climate impacts. Major challenges in this context are the large diversity of the relevant spatial and temporal scales, the multifactorial causation of many climate impacts', considerable scientific uncertainties, and the ambiguity associated with unavoidable normative evaluations. A hierarchical framework is presented for structuring climate impact assessments that reflects the evolution of their practice and of the underlying theory. Integrated assessment models of climate change (IAMs) are scientific tools that contain simplified representations of the relevant components of the coupled society-climate system. The major decision-analytical frameworks for IAMs are evaluated according to their ability to address important aspects of the pertinent social decision problem. The guardrail approach is presented as an inverse' framework for climate change decision support, which aims to identify the whole set of policy strategies that are compatible with a set of normatively specified constraints (guardrails'). This approach combines, to a certain degree, the scientific rigour and objectivity typical of predictive approaches with the ability to consider virtually all decision options that is at the core of optimization approaches. The ICLIPS model is described as the first IAM that implements the guardrail approach. The representation of climate impacts is a key concern in any IAM. A review of existing IAMs reveals large differences in the coverage of impact sectors, in the choice of the impact numeraire(s), in the consideration of non-climatic developments, including purposeful adaptation, in the handling of uncertainty, and in the inclusion of singular events. IAMs based on an inverse approach impose specific requirements to the representation of climate impacts. This representation needs to combine a level of detail and reliability that is sufficient for the specification of impact guardrails with the conciseness and efficiency that allows for an exploration of the complete domain of plausible climate protection strategies. Large-scale singular events can often be represented by dynamic reduced-form models. This approach, however, is less appropriate for regular impacts where the determination of policy-relevant results generally needs to consider the heterogeneity of climatic, environmental, and socioeconomic factors at the local or regional scale. Climate impact response functions (CIRFs) are identified as the most suitable reduced-form representation of regular climate impacts in the ICLIPS model. A CIRF depicts the aggregated response of a climate-sensitive system or sector as simulated by a spatially explicit sectoral impact model for a representative subset of plausible futures. In the CIRFs presented here, global mean temperature and atmospheric CO2 concentration are used as predictors for global and regional impacts on natural vegetation, agricultural crop production, and water availability. Application of a pattern scaling technique makes it possible to consider the regional and seasonal patterns in the climate anomalies simulated by several general circulation models while ensuring the efficiency of the dynamic model components. Efforts to provide quantitative estimates of future climate impacts generally face a trade-off between the relevance of an indicator for stakeholders and the exactness with which it can be determined. A number of non-monetary aggregated impact indicators for the CIRFs is presented, which aim to strike the balance between these two conflicting goals while taking into account additional constraints of the ICLIPS modelling framework. Various types of impact diagrams are used for the visualization of CIRFs, each of which provides a different perspective on the impact result space. The sheer number of CIRFs computed for the ICLIPS model precludes their comprehensive presentation in this thesis. Selected results referring to changes in the distribution of biomes in different biogeographical regions, in the agricultural potential of various countries, and in the water availability in selected major catchments are discussed. The full set of CIRFs is accessible via the ICLIPS Impacts Tool, a graphical user interface that provides convenient access to more than 100,000 impact diagrams developed for the ICLIPS model. The technical aspects of the software are described as well as the accompanying database of CIRFs. The most important application of CIRFs is in inverse' mode, where they are used to translate impact guardrails into simultaneous constraints for variables from the optimizing ICLIPS climate-economy model. This translation is facilitated by algorithms for the computation of reachable climate domains and for the parameterized approximation of admissible climate windows derived from CIRFs. The comprehensive set of CIRFs, together with these algorithms, enables the ICLIPS model to flexibly explore sets of climate policy strategies that explicitly comply with impact guardrails specified in biophysical units. This feature is not found in any other intertemporally optimizing IAM. A guardrail analysis with the integrated ICLIPS model is described that applies selected CIRFs for ecosystem changes. So-called necessary carbon emission corridors' are determined for a default choice of normative constraints that limit global vegetation impacts as well as regional mitigation costs, and for systematic variations of these constraints. A brief discussion of recent developments in integrated assessment modelling of climate change connects the work presented here with related efforts. KW - Klimawandel KW - Klimafolgen KW - Integrierte Bewertung KW - Leitplankenansatz KW - Fensteransatz KW - Inversanalyse KW - Klimawirkungsfunktionen KW - Musterskalierung KW - ICLIPS KW - Climate change KW - climate impacts KW - integrated assessment KW - guardrail approach KW - tolerable windows approach KW - inverse analysis KW - climate impact response func Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001089 ER - TY - THES A1 - Gil-Merino Rubio, Rodrigo T1 - Cosmology through gravitational lenses N2 - In dieser Dissertation nutze ich den Gravitationslinseneffekt, um eine Reihe von kosmologischen Fragen zu untersuchen. Der Laufzeitunterschied des Gravitationslinsensystems HE1104-1805 wurde mit unterschiedlichen Methoden bestimmt. Zwischen den beiden Komponenten erhalte ich einen Unterschied von Delta_t(A-B) = -310 +-20 Tagen (2 sigma Konfidenzintervall). Außerdem nutze ich eine dreijährige Beobachtungskampagne, um den Doppelquasar Q0957+561 zu untersuchen. Die beobachteten Fluktuationen in den Differenzlichtkurven lassen sich durch Rauschen erklären, ein Mikrogravitationslinseneffekt wird zur Erklärung nicht benötigt. Am Vierfachquasar Q2237+0305 untersuchte ich den Mikrogravitationslinseneffekt anhand der Daten der GLITP-Kollaboration (Okt. 1999-Feb. 2000). Durch die Abwesenheit eines starken Mikrogravitationslinsensignals konnte ich eine obere Grenze von v=600 km/s f für die effektive Transversalgeschwindigkeit der Linsengalaxie bestimmen (unter der Annahme von Mikrolinsen mit 0.1 Sonnenmassen). Im zweiten Teil der Arbeit untersuchte ich die Verteilung der Dunklen Materie in Galaxienhaufen. Für den Galaxienhaufen Cl0024+1654 erhalte ich ein Masse-Leuchtkraft-Verhältnis von M/L = 200 M_sun/L_sun (innerhalb eines Radius von 3 Bogenminuten). Im Galaxienhaufen RBS380 finde ich eine relativ geringe Röntgenleuchtkraft von L =2*10^(44) erg/s, obwohl im optischen eine große Anzahl von Galaxien gefunden wurde. N2 - In this thesis the gravitational lensing effect is used to explore a number of cosmological topics. We determine the time delay in the gravitationally lensed quasar system HE1104-1805 using different techniques. We obtain a time delay Delta_t(A-B) Delta_t(A-B) =-310 +- 20 days (2 sigma errors) between the two components. We also study the double quasar Q0957+561 during a three years monitoring campaign. The fluctuations we find in the difference light curves are completely consistent with noise and no microlensing is needed to explain these fluctuations. Microlensing is also studied in the quadruple quasar Q2237+0305 during the GLITP collaboration (Oct.1999-Feb.2000). We use the absence of a strong microlensing signal to obtain an upper limit of v=600 km/s for the effective transverse velocity of the lens galaxy (considering microlenses with 0.1 solar masses). The distribution of dark matter in galaxy clusters is also studied in the second part of the thesis. In the cluster of galaxies Cl0024+1654 we obtain a mass-to-light ratio of M/L = 200 M_sun/L_sun (within a radius of 3 arcminutes). In the galaxy cluster RBS380 we find a relatively low X-ray luminosity for a massive cluster of L =2*10^(44) erg/s, but a rich distribution of galaxies in the optical band. KW - Gravitationslinsen KW - Mikrolinsen KW - Quasar KW - gravitational lensing KW - microlensing KW - quasar Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001030 ER - TY - THES A1 - Xü, Chenggang T1 - Preparation and characterization of vapour deposited films based on substituted 2,5-diphenyl-1,3,4-oxadiazole derivatives N2 - Diese Arbeit befasst sich mit dem Einfluss der molekularen Struktur von 2,5-Diphenyl-1,3,4-Oxadiazol-Derivaten auf die Präparierung dünner Schichten mittels Vakuumdeposition. Dünne Schichten von diesen Substanzen wurden auf Si/SiO2 aufgedampft und ihre Struktur systematisch mittels XSR, AFM und IR untersucht. Das Ergebnis zeigt, dass die Schichtstrukturen offenbar von Substratetemperatur (Ts) abhängig sind. Im untersuchten Ts-Bereich bilden etherverbrückte Oxadiazole immer geordnete Schichten und die Schichtperiodicität hängt linear von der Längen der aliphatischen Ketten, während sich bei den amidverbrückten Oxadiazolen nur bei hohen Ts geordnete Schichten bilden können. Diese Unterschiede sind auf die intermolekularen Wasserstoffbrücken zurückzuführen. Der Tilt-Winkel der Moleküle ist durch die Wechselwirkung zwischen dem aromatischen Teil bestimmt. Die Wechselwirkungen zwischen den Kopfgruppen können durch Tempern abgeschwächt werden und führen zur Strukturumwandlung von Schichten, die auf etherverbrückten Oxadiazolen basieren. Alle Schichten von etherverbrückten Oxadiazolen haben Doppelschicht-Struktur, aber amidverbrückte Oxadiazole bilden nur Doppelschicht-Strukturen, wenn die Moleküle eine Kopfgruppe besitzen. N2 - The correlations between the chemical structures of the 2,5-diphenyl-1,3,4-oxadiazole compounds and their corresponding vapour deposited film structures on Si/SiO2 were systematically investigated with AFM, XSR and IR for the first time. The result shows that the film structure depends strongly on the substrate temperature (Ts). For the compounds with ether bridge group, the film periodicity depends linearly on the length of the aliphatic chain. The films based on those oxadiazols have ordered structure in the investigated substrate temperature region, while die amide bridged compounds form ordered film only at high Ts due to the formation of intermolecular H-bond. The tilt angle of most molecules is determined by the pi-pi complexes between the molecules. The intermolecular interaction between head groups leads to the structural transformation during the thermal treatment after deposition. All the ether bridged oxadiazoles form films with bilayer structure, while amide bridged oxadiazole form film bilayer structure only when the molecule has a head group. KW - 1 KW - 3 KW - 4-oxadiazol KW - Vapour Deposition KW - Dünnschichten KW - AFM KW - X-ray KW - Infrarot Spektroskopie KW - intermolekülare Wechselwirkung KW - Hochvakuum KW - 1 KW - 3 KW - 4-oxadiazole KW - vapour deposition KW - Thin film KW - AFM KW - X-ray KW - Infrared spectroscopy KW - intermolecular interaction KW - high vacuum Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001358 ER - TY - THES A1 - Boström, Kim T1 - Lossless quantum data compression and secure direct communication N2 - Diese Dissertation behandelt die Kodierung und Verschickung von Information durch einen Quantenkanal. Ein Quantenkanal besteht aus einem quantenmechanischen System, welches vom Sender manipuliert und vom Empfänger ausgelesen werden kann. Dabei repräsentiert der individuelle Zustand des Kanals die Nachricht. Die zwei Themen der Dissertation umfassen 1) die Möglichkeit, eine Nachricht in einem Quantenkanal verlustfrei zu komprimieren und 2) die Möglichkeit eine Nachricht von einer Partei zu einer einer anderen direkt und auf sichere Weise zu übermitteln, d.h. ohne dass es einer dritte Partei möglich ist, die Nachricht abzuhören und dabei unerkannt zu bleiben. Die wesentlichen Ergebnisse der Dissertation sind die folgenden. Ein allgemeiner Formalismus für Quantencodes mit variabler Länge wird ausgearbeitet. Diese Codes sind notwendig um verlustfreie Kompression zu ermöglichen. Wegen der Quantennatur des Kanals sind die codierten Nachrichten allgemein in einer Superposition von verschiedenen Längen. Es zeigt sich, daß es unmöglich ist eine Quantennachricht verlustfrei zu komprimieren, wenn diese dem Sender nicht apriori bekannt ist. Im anderen Falle wird die Möglichkeit verlustfreier Quantenkompression gezeigt und eine untere Schranke für die Kompressionsrate abgeleitet. Des weiteren wird ein expliziter Kompressionsalgorithmus konstruiert, der für beliebig vorgegebene Ensembles aus Quantennachrichten funktioniert. Ein quantenkryptografisches Prokoll - das “Ping-Pong Protokoll” - wird vorgestellt, welches die sichere direkte übertragung von klassischen Nachrichten durch einen Quantenkanal ermöglicht. Die Sicherheit des Protokolls gegen beliebige Abhörangriffe wird bewiesen für den Fall eines idealen Quantenkanals. Im Gegensatz zu anderen quantenkryptografischen Verfahren ist das Ping-Pong Protokoll deterministisch und kann somit sowohl für die Übermittlung eines zufälligen Schlüssels als auch einer komponierten Nachricht verwendet werden. Das Protokoll is perfekt sicher für die Übertragung eines Schlüssels und quasi-sicher für die direkte Übermittlung einer Nachricht. Letzteres bedeutet, dass die Wahrscheinlichkeit eines erfolgreichen Abhörangriffs exponenziell mit der Länge der Nachricht abnimmt. N2 - This thesis deals with the encoding and transmission of information through a quantum channel. A quantum channel is a quantum mechanical system whose state is manipulated by a sender and read out by a receiver. The individual state of the channel represents the message. The two topics of the thesis comprise 1) the possibility of compressing a message stored in a quantum channel without loss of information and 2) the possibility to communicate a message directly from one party to another in a secure manner, that is, a third party is not able to eavesdrop the message without being detected. The main results of the thesis are the following. A general framework for variable-length quantum codes is worked out. These codes are necessary to make lossless compression possible. Due to the quantum nature of the channel, the encoded messages are in general in a superposition of different lengths. It is found to be impossible to compress a quantum message without loss of information if the message is not apriori known to the sender. In the other case it is shown that lossless quantum data compression is possible and a lower bound on the compression rate is derived. Furthermore, an explicit compression scheme is constructed that works for arbitrarily given source message ensembles. A quantum cryptographic protocol - the “ping-pong protocol” - is presented that realizes the secure direct communication of classical messages through a quantum channel. The security of the protocol against arbitrary eavesdropping attacks is proven for the case of an ideal quantum channel. In contrast to other quantum cryptographic protocols, the ping-pong protocol is deterministic and can thus be used to transmit a random key as well as a composed message. The protocol is perfectly secure for the transmission of a key, and it is quasi-secure for the direct transmission of a message. The latter means that the probability of successful eavesdropping exponentially decreases with the length of the message. KW - quanteninformation KW - quantenkodierung KW - quantenkanal KW - kompression KW - kryptografie KW - sichere Übertragung KW - quantum information KW - quantum channel KW - compression KW - cryptography KW - secure communication Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001383 ER - TY - THES A1 - Nikolov, Vesselin Kirolov T1 - Model membranes grafted with long polymers N2 - Wir untersuchen, welchen Einfluss die Verankerung von langen, hydrophilen Polymeren in Lipidmembranen auf deren elastische Eigenschaften ausübt. Theoretisch werden zwei Grenzbereiche für die spontane Krümmung der Membran erwartet: i) bei kleinen Oberflächenkonzentrationen des Polymers (Pilzgebiet) sollte die spontane Krümmung linear von der Oberflächendichte des verankerten Polymers abhängen; ii) bei hoher Bedeckung (Bürstengebiet) sollte die Abhängigkeit quadratisch sein. Wir versuchen, Vorhersagen für das Bürstengebiet zu prüfen, indem wir die morphologischen Veränderungen beobachten, die bei Riesen (Giant)- Vesikeln hervorgerufen werden. Als lange Polymere verwenden wir fluoreszenzmarkierte λ-Phage DNA Moleküle, die durch eine Biotin-Avidin-Biotin Verbindung an biotinhaltigen Lipidvesikeln befestigt sind. Wir kontrollieren die Oberflächenkonzentration der Anker durch Variation der Menge an biotinhaltigem Lipid in der Membran. Die Menge der an der Membran verankerten DNA wird durch Fluoreszenzmessungen quantifiziert. Änderungen in den elastischen Eigenschaften der Membran bei Anbindung der DNA, werden über eine Analyse der Vesikel-Fluktuationen kontrolliert. Die spontane Krümmung der Membran steigt mit der Oberflächenbeladung. Bei höheren Verankerungen bilden die Vesikel Knospen (budding). Die Größe der Knospen kann ebenfalls zur Bestimmung der Krümmung der Membran verwendet werden. Der Einfluss auf die Biegesteifigkeit ist Thema weiterer Untersuchungen. N2 - We study the effect on the elastic properties of lipid membranes induced by anchoring of long hydrophilic polymers. Theoretically, two limiting regimes for the membrane spontaneous curvature are expected : i) at low surface polymer concentration (mushroom regime) the spontaneous curvature should scale linearly with the surface density of anchored polymers; ii) at high coverage (brush regime) the dependence should be quadratic. We attempt to test the predictions for the brush regime by monitoring the morphological changes induced on giant vesicles. As long polymers we use fluorescently labeled λ-phage DNA molecules which are attached to biotinylated lipid vesicles with a biotin-avidin-biotin linkage. By varying the amount of biotinylated lipid in the membrane we control the surface concentration of the anchors. The amount of anchored DNA to the membrane is quantified with fluorescence measurements. Changes in the elastic properties of the membrane as DNA grafts to it are monitored via analysis of the vesicle fluctuations. The spontaneous curvature of the membrane increases as a function of the surface coverage. At higher grafting concentrations the vesicles bud. The size of the buds can also be used to assess the membrane curvature. The effect on the bending stiffness is a subject of further investigation. KW - membrane curvature KW - anchored polymer KW - fluctuations KW - avidin Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001409 ER - TY - THES A1 - Albus, Alexander P. T1 - Mixtures of Bosonic and Fermionic atoms N2 - Ziel der Arbeit war die systematische theoretische Behandlung von Gemischen aus bosonischen und fermionischen Atomen in einem Parameterbereich, der sich zur Beschreibung von aktuellen Experimenten mit ultra-kalten atomaren Gasen eignet. Zuerst wurde der Formalismus der Quantenfeldtheorie auf homogene, atomare Boson-Fermion Gemische erweitert, um grundlegende Größen wie Quasiteilchenspektren, die Grundzustandsenergie und daraus abgeleitete Größen über die Molekularfeldtheorie hinaus zu berechnen. Unter Zuhilfenahme der dieser Resultate System wurde ein Boson-Fermion Gemisch in einem Fallenpotential im Rahmen der Dichtefunktionaltheorie beschrieben. Daraus konnten die Dichteprofile ermittelt werden und es ließen sich drei Bereiche im Phasendiagramm identifizieren: (i) ein Bereich eines stabilen Gemisches, (ii) ein Bereich, in dem die Spezies entmischt sind und (iii) ein Bereich, in dem das System kollabiert. Im letzten dieser drei Fällen waren Austausch--Korrelationseffekte signifikant. Weiterhin wurde die Änderung der kritischen Temperatur der Bose-Einstein-Kondensation aufgrund der Boson-Fermion-Wechselwirkung berechnet. Verursacht wird dieser Effekt von Dichtumverteilungen aufgrund der Wechselwirkung. Dann wurden Boson-Fermion Gemische in optischen Gittern betrachtet. Ein Stabilitätskriterium gegen Phasenentmischung wurde gefunden und es ließen sich Bedingungen für einen supraflüssig zu Mott-isolations Phasenübergang angeben. Diese wurden sowohl mittels einer Molekularfeldrechnung als auch numerisch im Rahmen eines Gutzwilleransatzes gefunden. Es wurden weiterhin neuartige frustrierte Grundzustände im Fall von sehr großen Gitterstärken gefunden. N2 - The theory of atomic Boson-Fermion mixtures in the dilute limit beyond mean-field is considered in this thesis. Extending the formalism of quantum field theory we derived expressions for the quasi-particle excitation spectra, the ground state energy, and related quantities for a homogenous system to first order in the dilute gas parameter. In the framework of density functional theory we could carry over the previous results to inhomogeneous systems. We then determined to density distributions for various parameter values and identified three different phase regions: (i) a stable mixed regime, (ii) a phase separated regime, and (iii) a collapsed regime. We found a significant contribution of exchange-correlation effects in the latter case. Next, we determined the shift of the Bose-Einstein condensation temperature caused by Boson-Fermion interactions in a harmonic trap due to redistribution of the density profiles. We then considered Boson-Fermion mixtures in optical lattices. We calculated the criterion for stability against phase separation, identified the Mott-insulating and superfluid regimes both, analytically within a mean-field calculation, and numerically by virtue of a Gutzwiller Ansatz. We also found new frustrated ground states in the limit of very strong lattices. ----Anmerkung: Der Autor ist Träger des durch die Physikalische Gesellschaft zu Berlin vergebenen Carl-Ramsauer-Preises 2004 für die jeweils beste Dissertation der vier Universitäten Freie Universität Berlin, Humboldt-Universität zu Berlin, Technische Universität Berlin und Universität Potsdam. KW - Quantendegeneriert BEK FDS ultrakalte Atome KW - quantum degenerate BEC FDS ultacold atoms Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001065 ER - TY - THES A1 - Jaster, Nicole T1 - Ratchet models of molecular motors N2 - Transportvorgänge in und von Zellen sind von herausragender Bedeutung für das Überleben des Organismus. Muskeln müssen sich kontrahieren können, Chromosomen während der Mitose an entgegengesetzte Enden der Zelle bewegt und Organellen, das sind von Membranen umschlossene Kompartimente, entlang molekularer Schienen transportiert werden. Molekulare Motoren sind Proteine, deren Hauptaufgabe es ist, andere Moleküle zu bewegen. Dazu wandeln sie die bei der ATP-Hydrolyse freiwerdende chemische Energie in mechanische Arbeit um. Die Motoren des Zellskeletts gehören zu den drei Superfamilien Myosin, Kinesin und Dynein. Ihre Schienen sind Filamente des Zellskeletts, Actin und die Microtubuli. In dieser Arbeit werden stochastische Modelle untersucht, welche dazu dienen, die Fortbewegung dieser linearen molekularen Motoren zu beschreiben. Die Skala, auf der wir die Bewegung betrachten, reicht von einzelnen Schritten eines Motorproteins bis in den Bereich der gerichteten Bewegung entlang eines Filaments. Ein Einzelschritt überbrückt je nach Protein etwa 10 nm und wird in ungefähr 10 ms zurückgelegt. Unsere Modelle umfassen M Zustände oder Konformationen, die der Motor annehmen kann, während er sich entlang einer eindimensionalen Schiene bewegt. An K Orten dieser Schiene sind Übergänge zwischen den Zuständen möglich. Die Geschwindigkeit des Proteins lässt sich in Abhängigkeit von den vertikalen Übergangsraten zwischen den einzelnen Zuständen analytisch bestimmen. Wir berechnen diese Geschwindigkeit für Systeme mit bis zu vier Zuständen und Orten und können weiterhin eine Reihe von Regeln ableiten, die uns einschätzen helfen, wie sich ein beliebiges vorgegebenes System verhalten wird. Darüber hinaus betrachten wir entkoppelte Subsysteme, also einen oder mehrere Zustände, die keine Verbindung zum übrigen System haben. Mit einer bestimmten Wahrscheinlichkeit kann ein Motor einen Zyklus von Konformationen durchlaufen, mit einer anderen Wahrscheinlichkeit einen davon unabhängigen anderen. Aktive Elemente werden in realen Transportvorgängen durch Motorproteine nicht auf die Übergänge zwischen den Zuständen beschränkt sein. In verzerrten Netzwerken oder ausgehend von der diskreten Mastergleichung des Systems können auch horizontale Raten spezifiziert werden und müssen weiterhin nicht mehr die Bedingungen der detaillierten Balance erfüllen. Damit ergeben sich eindeutige, komplette Pfade durch das jeweilige Netzwerk und Regeln für die Abhängigkeit des Gesamtstroms von allen Raten des Systems. Außerdem betrachten wir die zeitliche Entwicklung für vorgegebene Anfangsverteilungen. Bei Enzymreaktionen gibt es die Idee des Hauptpfades, dem diese bevorzugt folgen. Wir bestimmen optimale Pfade und den maximalen Fluss durch vorgegebene Netzwerke. Um darüber hinaus die Geschwindigkeit des Motors in Abhängigkeit von seinem Treibstoff ATP angeben zu können, betrachten wir mögliche Reaktionskinetiken, die den Zusammenhang zwischen den unbalancierten Übergangsraten und der ATP-Konzentration bestimmen. Je nach Typ der Reaktionskinetik und Anzahl unbalancierter Raten ergeben sich qualitativ unterschiedliche Verläufe der Geschwindigkeitskurven in Abhängigkeit von der ATP-Konzentration. Die molekularen Wechselwirkungspotentiale, die der Motor entlang seiner Schiene erfährt, sind unbekannt.Wir vergleichen unterschiedliche einfache Potentiale und die Auswirkungen auf die Transportkoeffizienten, die sich durch die Lokalisation der vertikalen Übergänge im Netzwerkmodell im Vergleich zu anderen Ansätzen ergeben. N2 - Transport processes in and of cells are of major importance for the survival of the organism. Muscles have to be able to contract, chromosomes have to be moved to opposing ends of the cell during mitosis, and organelles, which are compartments enclosed by membranes, have to be transported along molecular tracks. Molecular motors are proteins whose main task is moving other molecules.For that purpose they transform the chemical energy released in the hydrolysis of ATP into mechanical work. The motors of the cytoskeleton belong to the three super families myosin, kinesin and dynein. Their tracks are filaments of the cytoskeleton, namely actin and the microtubuli. Here, we examine stochastic models which are used for describing the movements of these linear molecular motors. The scale of the movements comprises the regime of single steps of a motor protein up to the directed walk along a filament. A single step bridges around 10 nm, depending on the protein, and takes about 10 ms, if there is enough ATP available. Our models comprise M states or conformations the motor can attain during its movement along a one-dimensional track. At K locations along the track transitions between the states are possible. The velocity of the protein depending on the transition rates between the single states can be determined analytically. We calculate this velocity for systems of up to four states and locations and are able to derive a number of rules which are helpful in estimating the behaviour of an arbitrary given system. Beyond that we have a look at decoupled subsystems, i.e., one or a couple of states which have no connection to the remaining system. With a certain probability a motor undergoes a cycle of conformational changes, with another probability an independent other cycle. Active elements in real transport processes by molecular motors will not be limited to the transitions between the states. In distorted networks or starting from the discrete Master equation of the system, it is possible to specify horizontal rates, too, which furthermore no longer have to fulfill the conditions of detailed balance. Doing so, we obtain unique, complete paths through the respective network and rules for the dependence of the total current on all the rates of the system. Besides, we view the time evolutions for given initial distributions. In enzymatic reactions there is the idea of a main pathway these reactions follow preferably. We determine optimal paths and the maximal flow for given networks. In order to specify the dependence of the motor's velocity on its fuel ATP, we have a look at possible reaction kinetics determining the connection between unbalanced transitions rates and ATP-concentration. Depending on the type of reaction kinetics and the number of unbalanced rates, we obtain qualitatively different curves connecting the velocity to the ATP-concentration. The molecular interaction potentials the motor experiences on its way along its track are unknown. We compare different simple potentials and the effects the localization of the vertical rates in the network model has on the transport coefficients in comparison to other models. KW - Molekularer Motor KW - stochastische Ratsche KW - Motorzyklus KW - stochastisches Netzwerk KW - Motorgeschwindigkeit KW - molecular motor KW - stochastic ratchet KW - motor cycle KW - stochastic network KW - motor velocity Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000867 ER - TY - THES A1 - Klumpp, Stefan T1 - Movements of molecular motors : diffusion and directed walks N2 - Bewegungen von prozessiven molekularen Motoren des Zytoskeletts sind durch ein Wechselspiel von gerichteter Bewegung entlang von Filamenten und Diffusion in der umgebenden Lösung gekennzeichnet. Diese eigentümlichen Bewegungen werden in der vorliegenden Arbeit untersucht, indem sie als Random Walks auf einem Gitter modelliert werden. Ein weiterer Gegenstand der Untersuchung sind Effekte von Wechselwirkungen zwischen den Motoren auf diese Bewegungen. Im einzelnen werden vier Transportphänomene untersucht: (i) Random Walks von einzelnen Motoren in Kompartimenten verschiedener Geometrien, (ii) stationäre Konzentrationsprofile, die sich in geschlossenen Kompartimenten infolge dieser Bewegungen einstellen, (iii) randinduzierte Phasenübergänge in offenen röhrenartigen Kompartimenten, die an Motorenreservoirs gekoppelt sind, und (iv) der Einfluß von kooperativen Effekten bei der Motor-Filament-Bindung auf die Bewegung. Alle diese Phänomene sind experimentell zugänglich, und mögliche experimentelle Realisierungen werden diskutiert. N2 - Movements of processive cytoskeletal motors are characterized by an interplay between directed motion along filament and diffusion in the surrounding solution. In the present work, these peculiar movements are studied by modeling them as random walks on a lattice. An additional subject of our studies is the effect of motor-motor interactions on these movements. In detail, four transport phenomena are studied: (i) Random walks of single motors in compartments of various geometries, (ii) stationary concentration profiles which build up as a result of these movements in closed compartments, (iii) boundary-induced phase transitions in open tube-like compartments coupled to reservoirs of motors, and (iv) the influence of cooperative effects in motor-filament binding on the movements. All these phenomena are experimentally accessible and possible experimental realizations are discussed. KW - molekulare Motoren KW - aktive Prozesse KW - Diffusion KW - Random Walks KW - Gittermodelle KW - Phasenübergänge KW - Staus KW - kooperative Phänomene KW - molecular motors KW - active processes KW - diffusion KW - random walks KW - lattice models KW - phase transitions KW - traffic jams KW - cooperative phenomena Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000806 ER - TY - THES A1 - Heinig, Peter T1 - The geometry of interacting liquid domains in Langmuir monolayers N2 - Es werden die Strukturbildung und Benetzung zweidimensionaler (2D) Phasen von Langmuir-Monolagen im lokalen thermodynamischen Gleichgewicht untersucht. Eine Langmuir-Monolage ist ein isoliertes 2D System von Surfaktanten an der Wasser/Luft-Grenzfläche, in dem kristalline, flüssigkristalline, flüssige oder gasförmige Phasen auftreten, die sich in Positionsordnung und/oder Orientierungsordnung unterscheiden. Permanente elektrische Dipolmomente der Surfaktanten führen zu einer langreichweitigen repulsiven Selbstwechselwirkung der Monolage und zur Bildung mesoskopischer Strukturen. Es wird ein Wechselwirkungsmodell verwendet, das die Strukturbildung als Wechselspiel kurzreichweitiger Anziehung (nackte Linienspannung) und langreichweitiger Abstoßung (Oberflächenpotential) auf einer Skala Delta beschreibt. Physikalisch trennt Delta die beiden Längenskalen der lang- und kurzreichweitigen Wechselwirkung. In dieser Arbeit werden die thermodynamischen Stabilitätsbedingungen für die Form einer Phasengrenzlinie (Young-Laplace-Gleichung) und Dreiphasenkontaktpunkt (Young-Bedingung) hergeleitet und zur Beschreibung experimenteller Daten genutzt: Die Linienspannung benetzender 2D Tropfen wird mit Hilfe hängender-Tropfen-Tensiometrie gemessen. Die Blasenform und -größe von 2D Schäumen wird theoretisch modelliert und mit experimentellen 2D Schäumen verglichen. Kontaktwinkel werden durch die Anpassung von experimentellen Tropfen mit numerischen Lösungen der Young-Laplace-Gleichung auf Mikrometerskalen gemessen. Das Skalenverhalten des Kontaktwinkels ermöglicht die Bestimmung einer unteren Schranke von Delta. Weiterhin wird diskutiert, inwieweit das Schalten von 2D Benetzungsmodi in biologischen Membranen zur Steuerung der Reaktionskinetik ein Rolle spielen könnte. Hierzu werden Experimente aus unserer Gruppe, die in einer Langmuir-Monolage durchgeführt wurden, herangezogen. Abschließend wird die scheinbare Verletzung der Gibbs′schen Phasenregel in Langmuir-Monolagen (nicht-horizontales Plateau der Oberflächendruck-Fläche Isotherme, ausgedehntes Dreiphasengebiet in Einkomponentensystemen) quantitativ untersucht. Eine Verschmutzung der verwendeten Substanzen ist demnach die wahscheinlichste Erklärung, während Finite-Size-Effekte oder der Einfluss der langreichweitigen Elektrostatik die Größenordnung des Effektes nicht beschreiben können. N2 - The present work investigates the structure formation and wetting in two dimensional (2D) Langmuir monolayer phases in local thermodynamic equilibrium. A Langmuir monolayer is an isolated 2D system of surfactants at the air/water interface. It exhibits crystalline, liquid crystalline, liquid and gaseous phases differing in positional and/or orientational order. Permanent electric dipole moments of the surfactants lead to a long range repulsive interaction and to the formation of mesoscopic patterns. An interaction model is used describing the structure formation as a competition between short range attraction (bare line tension) and long range repulsion (surface potentials) on a scale Delta. Delta has the meaning of a dividing length between the short and long range interaction. In the present work the thermodynamic equilibrium conditions for the shape of two phase boundary lines (Young-Laplace equation) and three phase intersection points (Young′s condition) are derived and applied to describe experimental data: The line tension is measured by pendant droplet tensiometry. The bubble shape and size of 2D foams is calculated numerically and compared to experimental foams. Contact angles are measured by fitting numerical solutions of the Young-Laplace equation on micron scale. The scaling behaviour of the contact angle allows to measure a lower limit for Delta. Further it is discussed, whether in biological membranes wetting transitions are a way in order to control reaction kinetics. Studies performed in our group are discussed with respect to this question in the framework of the above mentioned theory. Finally the apparent violation of Gibbs′ phase rule in Langmuir monolayers (non-horizontal plateau of the surface pressure/area-isotherm, extended three phase coexistence region in one component systems) is investigated quantitatively. It has been found that the most probable explanation are impurities within the system whereas finite size effects or the influence of the long range electrostatics can not explain the order of magnitude of the effect. KW - Langmuir KW - Monolage KW - 2D KW - langreichweitig KW - Benetzung KW - Schäume KW - Phasenregel KW - Langmuir monolayer KW - 2D KW - long range KW - wetting KW - foams KW - phase rule Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000814 ER - TY - THES A1 - Zaikin, Alexei T1 - Noise-induced transitions and resonant effects in nonlinear systems T1 - - N2 - Unsere alltägliche Erfahrung ist mit verschiedenen akustischen Einfluessen wie Lärm, aber auch Musik verbunden. Jeder weiss, wie Lärm stören kann und Kommunikation behindert oder gar unterbindet. Ähnliche optische Effekte sind bekannt: starkes Schneetreiben oder Regengüsse verschlechtern die Sicht und lassen uns Umrisse nur noch schemenhaft erkennen. Jedoch koennen ähnliche Stimuli auch sehr positive Auswirkungen haben: Autofahrer fahren bei leiser Musik konzentrierter -- die Behauptung von Schulkindern, nur bei dröhnenden Bässen die Mathehausaufgaben richtig rechnen zu können, ist allerdings nicht wissenschaftlich erwiesen. Außerordentlich interessant aus dieser Sicht sind auch Reizleitungsprozesse: Reize werden nur weitergleitet, wenn die strukturlosen Signale der Neuronen mit ausreichend starker Intensität erfolgen, also ein Schwellwert überschritten ist. Der Physiker Dr. Alexei Zaikin von der Universität Potsdam beschäftigt sich mit sogenannten rauschinduzierten Phänomenen aus theorischer Sicht. Sein Forschungsgebiet sind Prozesse, bei denen Rauschen mehrfach das Systemverhalten beeinflusst: ist es ausreichend gross, d.h. größer als ein kritischer Wert, wird eine reguläre Struktur gebildet, die durch das immernoch vorhandene Rauschen mit der Struktur des Nachbarsystems synchronisiert. Um ein solches System mit kritischem Wert zu erhalten, bedarf es einer weiteren Rauschquelle. Herr Zaikin analysierte noch weitere Beispiele solcher doppelt stochastischen Effekte. Die Ausarbeitung derartiger theoretischer Grundlagen ist wichtig, da diese Prozesse in der Neurophysik, in technischen Kommunikationssystemen und in den Lebenswissenschaften eine Rolle spielen. N2 - Our every-day experience is connected with different acoustical noise or music. Usually noise plays the role of nuisance in any communication and destroys any order in a system. Similar optical effects are known: strong snowing or raining decreases quality of a vision. In contrast to these situations noisy stimuli can also play a positive constructive role, e.g. a driver can be more concentrated in a presence of quiet music. Transmission processes in neural systems are of especial interest from this point of view: excitation or information will be transmitted only in the case if a signal overcomes a threshold. Dr. Alexei Zaikin from the Potsdam University studies noise-induced phenomena in nonlinear systems from a theoretical point of view. Especially he is interested in the processes, in which noise influences the behaviour of a system twice: if the intensity of noise is over a threshold, it induces some regular structure that will be synchronized with the behaviour of neighbour elements. To obtain such a system with a threshold one needs one more noise source. Dr. Zaikin has analyzed further examples of such doubly stochastic effects and developed a concept of these new phenomena. These theoretical findings are important, because such processes can play a crucial role in neurophysics, technical communication devices and living sciences. T2 - Noise-induced transitions and resonant effects in nonlinear systems KW - Rauschinduzierte Phänomene KW - Stochastische Prozesse KW - Rauschen KW - Stochastische Resonanz KW - Noise-induced phenomena KW - stochastic processes KW - noise KW - stochastic resonance Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000761 ER - TY - THES A1 - Moreira, André Guérin T1 - Charged systems in bulk and at interfaces N2 - Eine der Faustregeln der Kolloid- und Oberflächenphysik ist, dass die meisten Oberflächen geladen sind, wenn sie mit einem Lösungsmittel, normalerweise Wasser, in Kontakt treten. Dies ist zum Beispiel bei ladungsstabilisierten Kolloidalen Suspensionen der Fall, bei denen die Oberfläche der Kolloidteilchen geladen ist (gewöhnlich mit einer Ladung von mehreren Hunderttausend Elementarladungen), oder bei Monoschichten ionischer Tenside, die auf einer Luft-Wasser Grenzfläche sitzen (wobei die wasserliebenden Kopfgruppen durch die Freisetzung von Gegenionen geladen werden), sowie bei Doppelschichten, die geladene phospholipide enthalten (wie Zellmembranen). In dieser Arbeit betrachten wir einige Modellsysteme, die zwar eine vereinfachte Fassung der Realität darstellen, von denen wir aber dennoch erwarten koennen, dass wir mit ihrer Hilfe einige physikalische Eigenschaften realer geladener Systeme (Kolloide und Elektrolyte) einfangen können. N2 - One of the rules-of-thumb of colloid and surface physics is that most surfaces are charged when in contact with a solvent, usually water. This is the case, for instance, in charge-stabilized colloidal suspensions, where the surface of the colloidal particles are charged (usually with a charge of hundreds to thousands of e, the elementary charge), monolayers of ionic surfactants sitting at an air-water interface (where the water-loving head groups become charged by releasing counterions), or bilayers containing charged phospholipids (as cell membranes). In this work, we look at some model-systems that, although being a simplified version of reality, are expected to capture some of the physical properties of real charged systems (colloids and electrolytes). We initially study the simple double layer, composed by a charged wall in the presence of its counterions. The charges at the wall are smeared out and the dielectric constant is the same everywhere. The Poisson-Boltzmann (PB) approach gives asymptotically exact counterion density profiles around charged objects in the weak-coupling limit of systems with low-valent counterions, surfaces with low charge density and high temperature (or small Bjerrum length). Using Monte Carlo simulations, we obtain the profiles around the charged wall and compare it with both Poisson-Boltzmann (in the low coupling limit) and the novel strong coupling (SC) theory in the opposite limit of high couplings. In the latter limit, the simulations show that the SC leads in fact to asymptotically correct density profiles. We also compare the Monte Carlo data with previously calculated corrections to the Poisson-Boltzmann theory. We also discuss in detail the methods used to perform the computer simulations. After studying the simple double layer in detail, we introduce a dielectric jump at the charged wall and investigate its effect on the counterion density distribution. As we will show, the Poisson-Boltzmann description of the double layer remains a good approximation at low coupling values, while the strong coupling theory is shown to lead to the correct density profiles close to the wall (and at all couplings). For very large couplings, only systems where the difference between the dielectric constants of the wall and of the solvent is small are shown to be well described by SC. Another experimentally relevant modification to the simple double layer is to make the charges at the plane discrete. The counterions are still assumed to be point-like, but we constraint the distance of approach between ions in the plane and counterions to a minimum distance D. The ratio between D and the distance between neighboring ions in the plane is, as we will see, one of the important quantities in determining the influence of the discrete nature of the charges at the wall over the density profiles. Another parameter that plays an important role, as in the previous case, is the coupling as we will demonstrate, systems with higher coupling are more subject to discretization effects than systems with low coupling parameter. After studying the isolated double layer, we look at the interaction between two double layers. The system is composed by two equally charged walls at distance d, with the counterions confined between them. The charge at the walls is smeared out and the dielectric constant is the same everywhere. Using Monte-Carlo simulations we obtain the inter-plate pressure in the global parameter space, and the pressure is shown to be negative (attraction) at certain conditions. The simulations also show that the equilibrium plate separation (where the pressure changes from attractive to repulsive) exhibits a novel unbinding transition. We compare the Monte Carlo results with the strong-coupling theory, which is shown to describe well the bound states of systems with moderate and high couplings. The regime where the two walls are very close to each other is also shown to be well described by the SC theory. Finally, Using a field-theoretic approach, we derive the exact low-density ("virial") expansion of a binary mixture of positively and negatively charged hard spheres (two-component hard-core plasma, TCPHC). The free energy obtained is valid for systems where the diameters d_+ and d_- and the charge valences q_+ and q_- of positive and negative ions are unconstrained, i.e., the same expression can be used to treat dilute salt solutions (where typically d_+ ~ d_- and q_+ ~ q_-) as well as colloidal suspensions (where the difference in size and valence between macroions and counterions can be very large). We also discuss some applications of our results. KW - geladene Systeme KW - elektrische Doppelschicht KW - Elektrolyte KW - Theorie KW - Simulation KW - charged systems KW - electric double layer KW - electrolytes KW - theory KW - simulation Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000677 ER - TY - THES A1 - Kuhlbrodt, Till T1 - Stability and variability of open-ocean deep convection in deterministic and stochastic simple models N2 - Die Tiefenkonvektion ist ein wesentlicher Bestandteil der Zirkulation im Nordatlantik. Sie beeinflusst den nordwärtigen Wärmetransport der thermohalinen Zirkulation. Ein Verständnis ihrer Stabilität und Variabilität ist daher nötig, um Klimaveränderungen im Bereich des Nordatlantiks einschätzen zu können. Diese Arbeit hat zum Ziel, das konzeptionelle Verständnis der Stabilität und der Variabilität der Tiefenkonvektion zu verbessern. Beobachtungsdaten aus der Labradorsee zeigen Phasen mit und ohne Tiefenkonvektion. Ein einfaches Modell mit zwei Boxen wird an diese Daten angepasst. Das Ergebnis legt nahe, dass die Labradorsee zwei koexistierende stabile Zustände hat, einen mit regelmäßiger Tiefenkonvektion und einen ohne Tiefenkonvektion. Diese Bistabilität ergibt sich aus einer positiven Salzgehalts-Rückkopplung, deren Ursache ein Netto-Süßwassereintrag in die Deckschicht ist. Der konvektive Zustand kann schnell instabil werden, wenn der mittlere Antrieb sich hin zu wärmeren oder weniger salzhaltigen Bedingungen ändert. Die wetterbedingte Variabilität des externen Antriebs wird durch die Addition eines stochastischen Antriebsterms in das Modell eingebaut. Es zeigt sich, dass dann die Tiefenkonvektion häufig an- und wieder ausgeschaltet wird. Die mittlere Aufenthaltszeit in beiden Zuständen ist ein Maß ihrer stochastischen Stabilität. Die stochastische Stabilität hängt in glatter Weise von den Parametern des Antriebs ab, im Gegensatz zu der deterministischen (nichtstochastischen) Stabilität, die sich abrupt ändern kann. Sowohl das Mittel als auch die Varianz des stochastischen Antriebs beeinflussen die Häufigkeit von Tiefenkonvektion. Eine Abnahme der Konvektionshäufigkeit, als Reaktion auf eine Abnahme des Salzgehalts an der Oberfläche, kann zum Beispiel durch eine Zunahme der Variabilität in den Wärmeflüssen kompensiert werden. Mit einem weiter vereinfachten Box-Modell werden einige Eigenschaften der stochastischen Stabilität analytisch untersucht. Es wird ein neuer Effekt beschrieben, die wandernde Monostabilität: Auch wenn die Tiefenkonvektion aufgrund geänderter Parameter des Antriebs kein stabiler Zustand mehr ist, kann der stochastische Antrieb immer noch häufig Konvektionsereignisse auslösen. Die analytischen Gleichungen zeigen explizit, wie die wandernde Monostabilität sowie andere Effekte von den Modellparametern abhängen. Diese Abhängigkeit ist für die mittleren Aufenthaltszeiten immer exponentiell, für die Wahrscheinlichkeit langer nichtkonvektiver Phasen dagegen nur dann, wenn diese Wahrscheinlichkeit gering ist. Es ist zu erwarten, dass wandernde Monostabilität auch in anderen Teilen des Klimasystems eine Rolle spielt. Insgesamt zeigen die Ergebnisse, dass die Stabilität der Tiefenkonvektion in der Labradorsee sehr empfindlich auf den Antrieb reagiert. Die Rolle der Variabilität ist entscheidend für ein Verständnis dieser Empfindlichkeit. Kleine Änderungen im Antrieb können bereits die Häufigkeit von Tiefenkonvektionsereignissen deutlich mindern, was sich vermutlich stark auf das regionale Klima auswirkt. N2 - Deep convection is an essential part of the circulation in the North Atlantic Ocean. It influences the northward heat transport achieved by the thermohaline circulation. Understanding its stability and variability is therefore necessary for assessing climatic changes in the area of the North Atlantic. This thesis aims at improving the conceptual understanding of the stability and variability of deep convection. Observational data from the Labrador Sea show phases with and without deep convection. A simple two-box model is fitted to these data. The results suggest that the Labrador Sea has two coexisting stable states, one with regular deep convection and one without deep convection. This bistability arises from a positive salinity feedback that is due to the net freshwater input into the surface layer. The convecting state can easily become unstable if the mean forcing shifts to warmer or less saline conditions. The weather-induced variability of the external forcing is included into the box model by adding a stochastic forcing term. It turns out that deep convection is then switched "on" and "off" frequently. The mean residence time in either state is a measure of its stochastic stability. The stochastic stability depends smoothly on the forcing parameters, in contrast to the deterministic (non-stochastic) stability which may change abruptly. The mean and the variance of the stochastic forcing both have an impact on the frequency of deep convection. For instance, a decline in convection frequency due to a surface freshening may be compensated for by an increased heat flux variability. With a further simplified box model some stochastic stability features are studied analytically. A new effect is described, called wandering monostability: even if deep convection is not a stable state due to changed forcing parameters, the stochastic forcing can still trigger convection events frequently. The analytical expressions explicitly show how wandering monostability and other effects depend on the model parameters. This dependence is always exponential for the mean residence times, but for the probability of long nonconvecting phases it is exponential only if this probability is small. It is to be expected that wandering monostability is relevant in other parts of the climate system as well. All in all, the results demonstrate that the stability of deep convection in the Labrador Sea reacts very sensitively to the forcing. The presence of variability is crucial for understanding this sensitivity. Small changes in the forcing can already significantly lower the frequency of deep convection events, which presumably strongly affects the regional climate. ----Anmerkung: Der Autor ist Träger des durch die Physikalische Gesellschaft zu Berlin vergebenen Carl-Ramsauer-Preises 2003 für die jeweils beste Dissertation der vier Universitäten Freie Universität Berlin, Humboldt-Universität zu Berlin, Technische Universität Berlin und Universität Potsdam. KW - Labradorsee ; Thermohaline Konvektion ; Stochastisches Modell KW - Stochastische dynamische Systeme KW - Nichtlineare Dynamik KW - Bistabilität KW - Nordatlantik KW - Stochastic dynamical systems KW - Nonlinear dynamics KW - Bistability KW - North Atlantic Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000622 ER - TY - THES A1 - Sahlmann, Hanno T1 - Coupling matter to loop quantum gravity N2 - Motiviert durch neuere Vorschläge zur experimentellen Untersuchung von Quantengravitationseffekten werden in der vorliegenden Arbeit Annahmen und Methoden untersucht, die für die Vorhersagen solcher Effekte im Rahmen der Loop-Quantengravitation verwendet werden können. Dazu wird als Modellsystem ein skalares Feld, gekoppelt an das Gravitationsfeld, betrachtet. Zunächst wird unter bestimmten Annahmen über die Dynamik des gekoppelten Systems eine Quantentheorie für das Skalarfeld vorgeschlagen. Unter der Annahme, dass sich das Gravitationsfeld in einem semiklassischen Zustand befindet, wird dann ein "QFT auf gekrümmter Raumzeit-Limes" dieser Theorie definiert. Im Gegensatz zur gewöhnlichen Quantenfeldtheorie auf gekrümmter Raumzeit beschreibt die Theorie in diesem Grenzfall jedoch ein quantisiertes Skalarfeld, das auf einem (klassisch beschriebenen) Zufallsgitter propagiert. Sodann werden Methoden vorgeschlagen, den Niederenergieliemes einer solchen Gittertheorie, vor allem hinsichtlich der resultierenden modifizierten Dispersonsrelation, zu berechnen. Diese Methoden werden anhand von einfachen Modellsystemen untersucht. Schließlich werden die entwickelten Methoden unter vereinfachenden Annahmen und der Benutzung einer speziellen Klasse von semiklassischen Zuständen angewandt, um Korrekturen zur Dispersionsrelation des skalaren und des elektromagnetischen Feldes im Rahmen der Loop-Quantengravitation zu berechnen. Diese Rechnungen haben vorläufigen Charakter, da viele Annahmen eingehen, deren Gültigkeit genauer untersucht werden muss. Zumindest zeigen sie aber Probleme und Möglichkeiten auf, im Rahmen der Loop-Quantengravitation Vorhersagen zu machen, die sich im Prinzip experimentell verifizieren lassen. N2 - Motivated by recent proposals on the experimental detectability of quantum gravity effects, the present thesis investigates assumptions and methods which might be used for the prediction of such effects within the framework of loop quantum gravity. To this end, a scalar field coupled to gravity is considered as a model system. Starting from certain assumptions about the dynamics of the coupled gravity-matter system, a quantum theory for the scalar field is proposed. Then, assuming that the gravitational field is in a semiclassical state, a "QFT on curved space-time limit" of this theory is defined. In contrast to ordinary quantum field theory on curved space-time however, in this limit the theory describes a quantum scalar field propagating on a (classical) random lattice. Then, methods to obtain the low energy limit of such a lattice theory, especially regarding the resulting modified dispersion relations, are discussed and applied to simple model systems. Finally, under certain simplifying assumptions, using the methods developed before as well as a specific class of semiclassical states, corrections to the dispersion relations for the scalar and the electromagnetic field are computed within the framework of loop quantum gravity. These calculations are of preliminary character, as many assumptions enter whose validity remains to be studied more thoroughly. However they exemplify the problems and possibilities of making predictions based on loop quantum gravity that are in principle testable by experiment. KW - Quantengravitation KW - Loop-Quantengravitation KW - semiklassische Zustände KW - Dispersionsrelationen KW - quantum gravity KW - loop quantum gravity KW - semiclassical states KW - dispersion relations Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000602 ER - TY - THES A1 - Franco González, Olga T1 - Structural and spectroscopical study of crystals of 1,3,4-oxadiazole derivatives at high pressure N2 - Die Suche nach neuen Materialien von technischem Interesse hat in den letzten Jahren neue Antriebe zu der Untersuchung organischer Verbindungen gegeben. Organische Substanzen haben viele Vorteile wie z.B. die Möglichkeit, ihre Eigenschaften durch verschiedene chemische und physikalische Techniken im Herstellung-Prozess für ein bestimmtes Ziel zu modifizieren. Oxadiazolverbindungen sind interessant aufgrund ihrer Nutzung als Material für Licht emittierende Dioden und Scintillatoren. Die physikalischen Eigenschaften eines Festkörpers hängen von seiner Struktur ab. Unterschiedliche Strukturen entwickeln unterschiedliche intra- und intermolekülare Wechselwirkungen. Eine ausgezeichnete Weise, um sowohl die intra- als auch die intermolekularen Wechselwirkungen eines bestimmtes Stoffes zu beeinflussen, ohne seine chemischen Charakteristiken zu ändern, ist die Verwendung von hohem Druck. Wir haben den Einfluss von hohem Druck und hoher Temperatur auf die super-molekulare Struktur einiger Oxadiazolverbindungen im kristallinem Zustand untersucht. Aus diesen Untersuchungsergebnissen wurde eine Zustandsgleichung für diese Kristalle bestimmt. Überdies wurden die spektroskopischen Eigenschaften dieser Materialien unter hohem Druck charakterisiert. N2 - In recent years the search for new materials of technological interest has given new impulses to the study of organic compounds. Organic substances possess a great number of advantages such as the possibility to adjust their properties for a given purpose by different chemical and physical techniques in the preparation process. Oxadiazole derivatives are interesting due to their use as material for light emitting diodes (LED) as well as scintillators. The physical properties of a solid depend on its structure. Different structures induce different intra- and intermolecular interactions. An advantageous method to modify the intra- as well as the intermolecular interactions of a given substance is the application of high pressure. Furthermore, using this method the chemical features of the compound are not influenced. We have investigated the influence of high pressure and high temperature on the super-molecular structure of several oxadiazole derivatives in crystalline state. From the results of this investigation an equation of state for these crystals was determined. Furthermore, the spectroscopical features of these materials under high pressure were characterized. KW - Oxadiazolderivate ; Kristallstruktur ; Hochdruck ; UV-VIS-Spektroskopie ; Raman-Spektroskopie KW - Hochdruck KW - organische Kristalle KW - Kristallstruktur KW - Zustandsgleichung KW - UV-Vis Spektroskopie KW - Raman Streuung KW - high pressure KW - organic crystal KW - crystal structure KW - equation of state KW - UV-Vis spectroscopy KW - Raman scattering Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000572 ER - TY - THES A1 - Imperia, Paolo T1 - Localised states in organic semiconductors and their detection N2 - In den letzten Jahren ist eine Vielzahl neuer organischer Polymere und niedermolekularer Verbindungen synthetisiert worden, die sich als aktive Komponente für Elektrolumineszenz-Bauelemente und andere elektronische Anwendungen eignen. Trotz der großen technologischen Bedeutung und des erheblichen Fortschrittes, der bei der Herstellung solcher Materialien erzielt worden ist, sind grundlegende physikalische Eigenschaften dieser Materialklassen noch nicht ausreichend erforscht. Insbesondere das Auftreten lokalisierter Zustände innerhalb der Bandlücke hat besondere Bedeutung für ihre elektronischen Eigenschaften. Sowohl die Präsenz dieser flachen traps (Fallen, Löcher) als auch der Einfluß der Herstellungsbedingungen auf die tiefen und flachen lokalisierten Zustände wurden bisher nicht systematisch untersucht. Thermische Techniken sind wichtige Methoden, um lokalisierte Niveaus in organischen und anorganischen Materialien zu erforschen. Themisch-Stimulierte Lumineszenz (TSL), Thermisch-Stimulierte Ströme (TSC) und Thermisch-Stimulierte Depolarisierte Ströme (TSDC) ermöglichen die Untersuchung flacher und tiefer traps; in Verbindung mit DiElektrischer Spektroskopie (DES) können außerdem Polarisations- und Depolarisationseffekte studiert werden. Mit Hilfe numerischer Simulationen haben wir die kinetischen Gleichungen erster und zweiter Ordnung untersucht, die sich durch schwaches bzw. starkes Wieder-Fangen beschreiben lassen. In diesen Gleichungen haben wir Gaussian-, exponentielle und quasi-kontinuierliche Verteilungen von lokalisierten Zustände berücksichtigt. Durch Veränderung der beiden wichtigsten Parameter (Tiefe der traps E und Häufigkeit) konnte die Form der thermischen Maxima untersucht werden. Auch die die Gaussian-Verteilung bestimmenden Faktoren wurden verändert. Diese theoretischen Ergebnisse wurden auf die experimentellen Glow-Kurven angewandt. Dünne Filme aus polymeren und niedermolekularen Verbindungen (Polyphenylquinoxaline, Trisphenylquinoxaline und Oxadiazole), die wegen ihrer technologischen Bedeutung ausgewählt wurden, zeigen komplexes thermisches Verhalten. Insbesondere hoch geordnete Filme eines amphiphil substituierten 2-(p-nitrophenyl)-5-(p-undecylamidophenyl)-1,3,4-oxadiazols (NADPO) zeichnen sich durch komplexe TSL-Diagramme aus. Im Bereich von Em = 4 meV wurde eine Region flacher traps gefunden. Zwei weitere TSL-Maxima treten bei Tm = 221.5 K bzw. Tm = 254.2 K auf. Sie besitzen Aktivierungsenergien von Em= 0.63 eV bzw. Em = 0.66 eV, ihre Frequenzfaktoren betragen s = 2.4x1012 s-1 bzw. s = 1.85x1011 s-1, sie zeigen Breiten der Verteilung von s = 0.045 eV bzw. s = 0.088 eV. Des weiteren zeigt diese Arbeit, daß die Form der Glow-Kurven stark von der Anregungstemperatur und vom thermischen Kreislauf beeinflußt wird. N2 - New polymers and low molecular compounds, suitable for organic light emitting devices and organic electronic applications, have been synthesised in this years in order to obtain electron transport characteristics compatible with requirements for applications in real plastic devices. However, despite of the technological importance and of the relevant progress in devices manufacture, fundamental physical properties of such class of materials are still not enough studied. In particular extensive presence of distributions of localised states inside the band gap has a deep impact on their electronic properties. Such presence of shallow traps as well as the influence of the sample preparation conditions on deep and shallow localised states have not been, until now, systematically explored. The thermal techniques are powerful tools in order to study localised levels in inorganic and organic materials. Thermally stimulated luminescence (TSL), thermally stimulated currents (TSC) and thermally stimulated depolarisation currents (TSDC) allow to deeply look to shallow and deep trap levels as well as they permit to study, in synergy with dielectric spectroscopy (DES), polarisation and depolarisation effects. We studied, by means of numerical simulations, the first and the second order kinetic equations characterised by negligible and strong re-trapping respectively. We included in the equations Gaussian, exponential and quasi-continuous distributions of localised states. The shapes of the theoretical peaks have been investigated by means of systematic variation of the two main parameters of the equations, i. e. the energy trap depth E and the frequency factor a and of the parameters regulating the distributions, in particular for a Gaussian distribution the distribution width s and the integration limits. The theoretical findings have been applied to experimental glow curves. Thin films of polymers and low molecular compounds. Polyphenylquinoxalines, trisphenylquinoxalines and oxadiazoles, studied because of their technological relevance, show complex thermograms, having several levels of localised states and depolarisation peaks. In particular well ordered films of an amphiphilic substituted 2-(p-nitrophenyl)-5-(p-undecylamidophenyl)-1,3,4-oxadiazole (NADPO) are characterised by rich TSL thermograms. A wide region of shallow traps, localised at Em = 4 meV, has been successfully fit by means of a first order kinetic equation having a Gaussian distribution of localised states. Two further peaks, having a different origin, have been characterised. The peaks at Tm = 221.5 K and Tm = 254.2 have activation energy of Em= 0.63 eV and Em = 0.66 eV, frequency factor s = 2.4x1012 s-1 and s = 1.85x1011 s-1, distribution width s = 0.045 eV and s = 0.088 eV respectively. Increasing the number of thermal cycle, a peak, probably connected with structural defects, appears at Tm = 197.7 K. The numerical analysis of this peak was performed by means of a first order equation containing a Gaussian distribution of traps. The activation energy of the trap level is centred at Em = 0.55 eV. The distribution is perfectly symmetric with a quite small width s = 0.028 eV. The frequency factor is s = 1.15 x 1012 s-1, resulting of the same order of magnitude of its neighbour peak at Tm = 221.5 K, having both, probably, the same origin. Furthermore the work demonstrates that the shape of the glow curves is strongly influenced by the excitation temperature and by the thermal cycles. For that reason Gaussian distributions of localised states can be confused with exponential distributions if the previous thermal history of the samples is not adequately considered. KW - Themisch-Stimulierte Lumineszenz KW - TSL KW - Verteilungen von lokalisierten Zustände KW - Thermally stimulated luminescence KW - TSL KW - distributions of localised states Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000477 ER - TY - THES A1 - Memola, Elisabetta T1 - Magnetic jets from accretion disks : field structure and X-ray emission N2 - Astrophysikalische Jets sind stark kollimierte Materieströmungen hoher Geschwindigkeit. Sie stehen im Zusammenhang mit einer Fülle verschiedener astrophysikalischer Objekte wie jungen Sternen, stellaren schwarzen Löchern ('Mikro-Quasare'), Galaxien mit aktivem Kern (AGN) und wahrscheinlich auch mit dem beobachteten intensiven Aufblitzen von Gamma-Strahlung (Gamma Ray Bursts). Insbesondere hat sich gezeigt, dass die Jets der Mikro-Quasare wahrscheinlich als kleinskalige Version der Jets der AGN anzusehen sind. Neben den Beobachtungen haben vor allem auch theoretische Überlegungen gezeigt, dass Magnetfelder bei der Jetentstehung, -beschleunigung und -kollimation eine wichtige Rolle spielen. Weiterhin scheinen Jets systematisch verknüpft zu sein mit dem Vorhandensein einer Akkretionsscheibe um das zentrale Objekt. Insbesondere wenn ein schwarzes Loch den Zentralkörper darstellt, ist die umgebende Akkretionsscheibe der einzig mögliche Ort um Magnetfeld erzeugen zu können. Wir sind speziell interessiert am Entstehungsprozess hoch relativistischer Jets wie sie bei Mikro-Quasaren und AGN beobachtet werden. Insbesondere untersuchen wir die Region, in der der Jet kollimiert, eine Region, deren räumliche Ausdehnung extrem klein ist selbst im Vergleich zur Auflösung der Radioteleskope. Dies ist ein Grund, wieso zum heutigen Zeitpunkt für die meisten Quellen die theoretische Modellierung die einzige Möglichkeit darstellt, um Information über die physikalischen Prozesse in der innersten Region der Jetentstehung zu erhalten. Uns ist es zum ersten Mal gelungen, die globale zwei-dimensionale Magnetfeldstruktur stationärer, axialsymmetrischer, relativistischer und stark magnetisierter (kräfte-freier) Jets zu berechnen, die zum einen asymptotisch in einen zylindrischen Jet kollimieren, zum anderen aber in einer differential rotierenden Akkretionsscheibe verankert sind. Damit erlaubt dieser Ansatz eine physikalische Verkn¨upfung zwischen Akkretionsscheibe und dem asymptotischen Jet. Nimmt man also an, dass die Fußpunkte der Magnetfeldlinien mit Keplergeschwindigkeit rotieren, so kann man eine direkte Skalierung der Jetmagnetosphere mit der Größe des Zentralobjektes erhalten. Unsere Resultate zeigen eine gute Übereinstimmung zwischen unserem Modell und Beobachtungen des Jets von M87. Für das Beispiel eines relativistischen Mikroquasarjets haben wir die Röntgenemission im Bereich von 0.2-10.1 keV berechnet. Dafür haben wir in der Literatur aus den relativistischen magnetohydrodynamischen Gleichungen berechnete Jetgrößen (Dichte-, Geschwindigkeits-, und Temperaturprofil) verwendet und das Spektrum für jeden Punkt entlang der Jetströmung abgeleitet. Das theoretische thermische Röntgenspektrum des innersten, heißen Teils des Jets erhalten wir zusammengesetzt aus den spektralen Anteilen der einzelnen Volumenelemente entlang des Jets. Um relativistische Effekte wie Dopplerverschiebung und -verstärkung (boosting) aufgrund der Jetbewegung zu untersuchen, haben wir für verschiedene Inklinationswinkel des Jets zur Sichtlinie berechnet, wie die erhaltenen Spektren davon beeinflusst werden. Unsere Spektren zeigen deutlich die hochionisierten Eisen-Emissionslinien, die in den galaktischen Mikroquasaren GRS 1915+105 und XTE J1748-288 andeutungsweise beobachtet wurden. Eine Dopplerverschiebung dieser Linien ist in unseren Spektren deutlichzu sehen. Da die innerste, Röntgenstrahlung emittierende Region des magnetohydrodynamischen Jets allerdings noch unkollimiert ist, spielt Dopplerboosting in unseren Spektren, abhängig vom Sichtwinkel, keine große Rolle. Mit unseren Resultaten konnte zum ersten Mal ein Röntgenspektrum gewonnen werden, das auf der numerischen Lösung eines magnetohydrodynamischen Jets beruht. N2 - Jets are highly collimated flows of matter. They are present in a large variety of astrophysical sources: young stars, stellar mass black holes (microquasars), galaxies with an active nucleus (AGN) and presumably also intense flashes of gamma-rays. In particular, the jets of microquasars, powered by accretion disks, are probably small-scale versions of the outflows from AGN. Beside observations of astrophysical jet sources, also theoretical considerations have shown that magnetic fields play an important role in jet formation, acceleration and collimation. Collimated jets seem to be systematically associated with the presence of an accretion disk around a star or a collapsed object. If the central object is a black hole, the surrounding accretion disk is the only possible location for a magnetic field generation. We are interested in the formation process of highly relativistic jets as observed from microquasars and AGN. We theoretically investigate the jet collimation region, whose physical dimensions are extremely tiny even compared to radio telescopes spatial resolution. Thus, for most of the jet sources, global theoretical models are, at the moment, the only possibility to gain information about the physical processes in the innermost jet region. For the first time, we determine the global two-dimensional field structure of stationary, axisymmetric, relativistic, strongly magnetized (force-free) jets collimating into an asymptotically cylindrical jet (taken as boundary condition) and anchored into a differentially rotating accretion disk. This approach allows for a direct connection between the accretion disk and the asymptotic collimated jet. Therefore, assuming that the foot points of the field lines are rotating with Keplerian speed, we are able to achieve a direct scaling of the jet magnetosphere in terms of the size of the central object. We find a close compatibility between the results of our model and radio observations of the M87 galaxy innermost jet. We also calculate the X-ray emission in the energy range 0.2--10.1\,keV from a microquasar relativistic jet close to its source of 5 solar masses. In order to do it, we apply the jet flow parameters (densities, velocities, temperatures of each volume element along the collimating jet) derived in the literature from the relativistic magnetohydrodynamic equations. We obtain theoretical thermal X-ray spectra of the innermost jet as composition of the spectral contributions of the single volume elements along the jet. Since relativistic effects as Doppler shift and Doppler boosting due to the motion of jets toward us might be important, we investigate how the spectra are affected by them considering different inclinations of the line of sight to the jet axis. Emission lines of highly ionized iron are clearly visible in our spectra, probably also observed in the Galactic microquasars GRS 1915+105 and XTE J1748-288. The Doppler shift of the emission lines is always evident. Due to the chosen geometry of the magnetohydrodynamic jet, the inner X-ray emitting part is not yet collimated. Ergo, depending on the viewing angle, the Doppler boosting does not play a major role in the total spectra. This is the first time that X-ray spectra have been calculated from the numerical solution of a magnetohydrodynamic jet. KW - MHD ; Röntgenstrahlung ; Jets ; AGN ; Mikro-Quasare KW - MHD ; X-rays ; Jets ; AGN ; Microquasars Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000458 ER - TY - THES A1 - Kraut, Suso T1 - Multistable systems under the influence of noise N2 - Nichtlineare multistabile Systeme unter dem Einfluss von Rauschen weisen vielschichtige dynamische Eigenschaften auf. Ein mittleres Rauschlevel zeitigt ein Springen zwischen den metastabilen Zustaenden. Dieser “attractor-hopping” Prozess ist gekennzeichnet durch laminare Bewegung in der Naehe von Attraktoren und erratische Bewegung, die sich auf chaotischen Satteln abspielt, welche in die fraktalen Einzugsgebietsgrenzen eingebettet sind. Er hat rauschinduziertes Chaos zur Folge. Bei der Untersuchung der dissipativen Standardabbildung wurde das Phaenomen der Praeferenz von Attraktoren durch die Wirkung des Rauschens gefunden. Dies bedeutet, dass einige Attraktoren eine groessere Wahrscheinlichkeit erhalten aufzutreten, als dies fuer das rauschfreie System der Fall waere. Bei einer bestimmten Rauschstaerke ist diese Bevorzugung maximal. Andere Attraktoren werden aufgrund des Rauschens weniger oft angelaufen. Bei einer entsprechend hohen Rauschstaerke werden sie komplett ausgeloescht. Die Komplexitaet des Sprungprozesses wird fuer das Modell zweier gekoppelter logistischer Abbildungen mit symbolischer Dynamik untersucht. Bei Variation eines Parameters steigt an einem bestimmten Wert des Parameters die topologische Entropie steil an, die neben der Shannon Entropie als Komplexitaetsmass verwendet wird. Dieser Anstieg wird auf eine neuartige Bifurkation von chaotischen Satteln zurueckgefuehrt, die in einem Verschmelzen zweier Sattel besteht und durch einen “Snap-back”-Repellor vermittelt wird. Skalierungsgesetze sowohl der Verweilzeit auf einem der zuvor getrennten Teile des Sattels als auch des Wachsens der fraktalen Dimension des entstandenen Sattels beschreiben diese neuartige Bifurkation genauer. Wenn ein chaotischer Sattel eingebettet in der offenen Umgebung eines Einzugsgebietes eines metastabilen Zustandes liegt, fuehrt das zu einer deutlichen Senkung der Schwelle des rauschinduzierten Tunnelns. Dies wird anhand der Ikeda-Abbildung, die ein Lasersystem mit einer zeitverzoegerden Interferenz beschreibt, demonstriert. Dieses Resultat wird unter Verwendung der Theorie der Quasipotentiale erzielt. Sowohl dieser Effekt, die Senkung der Schwelle für rauschinduziertes Tunneln aus einem metastabilen Zustand durch einen chaotischen Sattel, als auch die beiden Skalierungsgesteze sind von experimenteller Relevanz. N2 - Nonlinear multistable systems under the influence of noise exhibit a plethora of interesting dynamical properties. A medium noise level causes hopping between the metastable states. This attractorhopping process is characterized through laminar motion in the vicinity of the attractors and erratic motion taking place on chaotic saddles, which are embedded in the fractal basin boundary. This leads to noise-induced chaos. The investigation of the dissipative standard map showed the phenomenon of preference of attractors through the noise. It means, that some attractors get a larger probability of occurrence than in the noisefree system. For a certain noise level this prefernce achieves a maximum. Other attractors are occur less often. For sufficiently high noise they are completely extinguished. The complexity of the hopping process is examined for a model of two coupled logistic maps employing symbolic dynamics. With the variation of a parameter the topological entropy, which is used together with the Shannon entropy as a measure of complexity, rises sharply at a certain value. This increase is explained by a novel saddle merging bifurcation, which is mediated by a snapback repellor. Scaling laws of the average time spend on one of the formerly disconnected parts and of the fractal dimension of the connected saddle describe this bifurcation in more detail. If a chaotic saddle is embedded in the open neighborhood of the basin of attraction of a metastable state, the required escape energy is lowered. This enhancement of noise-induced escape is demonstrated for the Ikeda map, which models a laser system with time-delayed feedback. The result is gained using the theory of quasipotentials. This effect, as well as the two scaling laws for the saddle merging bifurcation, are of experimental relevance. KW - Multistabilität KW - Rauschen KW - Nichtlineare Systeme KW - Chaotische Sattel KW - Multistability KW - noise KW - nonlinear systems KW - chaotic saddle Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000424 ER -