TY - JOUR A1 - Wetzel, Maria A1 - Kempka, Thomas A1 - Kühn, Michael T1 - Diagenetic trends of synthetic reservoir sandstone properties assessed by digital rock physics JF - Minerals N2 - Quantifying interactions and dependencies among geometric, hydraulic and mechanical properties of reservoir sandstones is of particular importance for the exploration and utilisation of the geological subsurface and can be assessed by synthetic sandstones comprising the microstructural complexity of natural rocks. In the present study, three highly resolved samples of the Fontainebleau, Berea and Bentheim sandstones are generated by means of a process-based approach, which combines the gravity-driven deposition of irregularly shaped grains and their diagenetic cementation by three different schemes. The resulting evolution in porosity, permeability and rock stiffness is examined and compared to the respective micro-computer tomographic (micro-CT) scans. The grain contact-preferential scheme implies a progressive clogging of small throats and consequently produces considerably less connected and stiffer samples than the two other schemes. By contrast, uniform quartz overgrowth continuously alters the pore space and leads to the lowest elastic properties. The proposed stress-dependent cementation scheme combines both approaches of contact-cement and quartz overgrowth, resulting in granulometric, hydraulic and elastic properties equivalent to those of the respective micro-CT scans, where bulk moduli slightly deviate by 0.8%, 4.9% and 2.5% for the Fontainebleau, Berea and Bentheim sandstone, respectively. The synthetic samples can be further altered to examine the impact of mineral dissolution or precipitation as well as fracturing on various petrophysical correlations, which is of particular relevance for numerous aspects of a sustainable subsurface utilisation. KW - digital core reconstruction KW - micro-CT scan KW - pore-scale KW - cementation KW - permeability-porosity relationship KW - elastic rock properties KW - numerical KW - simulation Y1 - 2021 U6 - https://doi.org/10.3390/min11020151 SN - 2075-163X VL - 11 IS - 2 PB - MDPI CY - Basel ER - TY - THES A1 - Schröder, Sarah T1 - Modelling surface evolution coupled with tectonics T1 - Modellierung von Oberflächenprozessen gekoppelt mit Tektonik BT - A case study for the Pamir BT - Eine Fallstudie zum Pamir N2 - This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west. N2 - Im Rahmen dieser Studie werden 1D und 2D Erosionsmodelle im Gebirgsmaßstab implementiert und mit Modellen für tektonische Deformation gekoppelt. Die Kopplungsmethode erlaubt unterschiedlich räumliche und zeitliche Auflösungen im tektonischen und im Erosionsmodell. Es werden sowohl vertikale als auch horizontale Bewegungen zwischen den Modellen transferiert. Darüber hinaus enthält die Kopplungsmethode ein Glättungsverfahren, um eventuelle Instabilitäten des tektonischen Modelles zu kompensieren. Beide Erosionsmodelle beziehen Hangerosion, Flusseinschneidung und Sedimentation ein. Der 1D Code nutzt Hack's Law, um die Wassermengen zu berechnen. Er garantiert Massenerhaltung, indem er Sedimente in Senken speichert. Das 2D Erosionsmodell DANSER basiert auf einem zellulären Automaten. Ein zusätzlicher steigungsabhängiger Faktor erweitert lineare zu nichtlinearer Diffusion. Wassermengen werden mit Hilfe des D8-Algorithmus und einer veränderten Form von O'Callaghans (1984) Algorithmus akkumuliert. Laterale Einschneidung, berechnet durch einen neuen Verteilungs-Algorithmus, verbessert die Modellierung von Flusssystemen. Flüsse sind dabei repräsentiert durch eine unterschiedliche Anzahl an Zellen orthogonal zur Fließrichtung. Ihre Breite wird nach empirischen Gesetzen ermittelt. Die präsentierten Anwendungen dienen der Studie des Pamirgebirges. Zunächst werden die Modellparameter anhand von Einschneidungs- und Erosionsraten sowie Sedimentdurchflüssen kalibriert. Ein digitales Höhenmodell dient als Anfangstopographie und zur Extraktion von Flussprofilen. Laterale Einschneidung zeigt eine deutliche Verbesserung zu bisher vorhandenen Modellen. Sie ermöglicht die Erhaltung der Flussbreite und zeigt hohe Einschneidungsraten in engen Flusspassagen. Modelle von Flussanzapfungen in einem System paralleler Verwerfungen bestätigen die Wichtigkeit von lateraler Einschneidung für Flussanzapfungsmodelle, die Hangerosion einbeziehen. Während die Modelle eine geringe Wahrscheinlichkeit von Flussanzapfungen mit hohem Ablenkungswinkel zeigen, belegen sie auch, dass deren (allgemeine) Wahrscheinlichkeit direkt von der Hebungsrate der Verwerfungen abhängt. Die Erodibilität beschleunigt lediglich die Geschwindigkeit von Flussanzapfungen. Ein Modell, das die Codes SLIM 3D und DANSER koppelt, dokumentiert die vielseitige Verwendbarkeit des neuen Codes: Es zeigt einen geringen Einfluss von Oberflächenprozessen auf die Lithosphärendeformation, während die Sedimentationsroutine erheblich auf spröde Oberflächendeformationen einwirkt. Das Modell legt nahe, dass Sedimentation ein zwischen zwei entstehenden Gebirgen gelegenes Becken weitet. Außerdem weitet sich der südlich von der interkontinentalen Kollisionszone gelegene Teil des Gebirge-Models ebenfalls durch Sedimentation. KW - erosion KW - coupling KW - SEC KW - surface evolution KW - thermo-mechanics KW - surface processes KW - DANSER KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - tectonics KW - modelling KW - modeling KW - numerical model KW - simulation KW - surface KW - fluvial incision KW - hillslope diffusion KW - finite differences KW - finite elements KW - Eulerian grid KW - DANSER KW - DANSER KW - Erosion KW - Modellierung KW - Tektonik KW - Koppelung KW - SEC KW - numerische Modellierung KW - Oberflächenprozesse KW - Pamir KW - Tien-Shan KW - Tian-Shan KW - Tiefendeformation KW - Software KW - Simulation KW - Oberfläche KW - fluviale Einschneidung KW - Hangerosion KW - finite Differenzen KW - finite Elemente KW - Eulerische Gitter Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90385 ER - TY - THES A1 - Pilz, Marco T1 - A comparison of proxies for seismic site conditions and amplification for the large urban area of Santiago de Chile T1 - Ein Vergleich seismischer Parameter für die Standort- und Verstärkungsabschätzung im Stadtgebiet von Santiago de Chile N2 - Situated in an active tectonic region, Santiago de Chile, the country´s capital with more than six million inhabitants, faces tremendous earthquake hazard. Macroseismic data for the 1985 Valparaiso and the 2010 Maule events show large variations in the distribution of damage to buildings within short distances indicating strong influence of local sediments and the shape of the sediment-bedrock interface on ground motion. Therefore, a temporary seismic network was installed in the urban area for recording earthquake activity, and a study was carried out aiming to estimate site amplification derived from earthquake data and ambient noise. The analysis of earthquake data shows significant dependence on the local geological structure with regards to amplitude and duration. Moreover, the analysis of noise spectral ratios shows that they can provide a lower bound in amplitude for site amplification and, since no variability in terms of time and amplitude is observed, that it is possible to map the fundamental resonance frequency of the soil for a 26 km x 12 km area in the northern part of the Santiago de Chile basin. By inverting the noise spectral rations, local shear wave velocity profiles could be derived under the constraint of the thickness of the sedimentary cover which had previously been determined by gravimetric measurements. The resulting 3D model was derived by interpolation between the single shear wave velocity profiles and shows locally good agreement with the few existing velocity profile data, but allows the entire area, as well as deeper parts of the basin, to be represented in greater detail. The wealth of available data allowed further to check if any correlation between the shear wave velocity in the uppermost 30 m (vs30) and the slope of topography, a new technique recently proposed by Wald and Allen (2007), exists on a local scale. While one lithology might provide a greater scatter in the velocity values for the investigated area, almost no correlation between topographic gradient and calculated vs30 exists, whereas a better link is found between vs30 and the local geology. When comparing the vs30 distribution with the MSK intensities for the 1985 Valparaiso event it becomes clear that high intensities are found where the expected vs30 values are low and over a thick sedimentary cover. Although this evidence cannot be generalized for all possible earthquakes, it indicates the influence of site effects modifying the ground motion when earthquakes occur well outside of the Santiago basin. Using the attained knowledge on the basin characteristics, simulations of strong ground motion within the Santiago Metropolitan area were carried out by means of the spectral element technique. The simulation of a regional event, which has also been recorded by a dense network installed in the city of Santiago for recording aftershock activity following the 27 February 2010 Maule earthquake, shows that the model is capable to realistically calculate ground motion in terms of amplitude, duration, and frequency and, moreover, that the surface topography and the shape of the sediment bedrock interface strongly modify ground motion in the Santiago basin. An examination on the dependency of ground motion on the hypocenter location for a hypothetical event occurring along the active San Ramón fault, which is crossing the eastern outskirts of the city, shows that the unfavorable interaction between fault rupture, radiation mechanism, and complex geological conditions in the near-field may give rise to large values of peak ground velocity and therefore considerably increase the level of seismic risk for Santiago de Chile. N2 - Aufgrund ihrer Lage in einem tektonisch aktiven Gebiet ist Santiago de Chile, die Hauptstadt des Landes mit mehr als sechs Millionen Einwohnern, einer großen Erdbebengefährdung ausgesetzt. Darüberhinaus zeigen makroseismische Daten für das 1985 Valparaiso- und das 2010 Maule-Erdbeben eine räumlich unterschiedliche Verteilung der an den Gebäuden festgestellten Schäden; dies weist auf einen starken Einfluss der unterliegenden Sedimentschichten und der Gestalt der Grenzfläche zwischen den Sedimenten und dem Festgestein auf die Bodenbewegung hin. Zu diesem Zweck wurde in der Stadt ein seismisches Netzwerk für die Aufzeichnung der Bodenbewegung installiert, um die auftretende Untergrundverstärkung mittels Erdbebendaten und seismischem Rauschen abzuschätzen. Dabei zeigt sich für die Erdbebendaten eine deutliche Abhängigkeit von der Struktur des Untergrunds hinsichtlich der Amplitude der Erschütterung und ihrer Dauer. Die Untersuchung der aus seismischem Rauschen gewonnenen horizontal-zu-vertikal-(H/V) Spektral-verhältnisse zeigt, dass diese Ergebnisse nur einen unteren Grenzwert für die Bodenverstärkung liefern können. Weil jedoch andererseits keine zeitliche Veränderung bei der Gestalt dieser Spektralverhältnisse festgestellt werden konnte, erlauben die Ergebnisse ferner, die Resonanzfrequenz des Untergrundes für ein 26 km x 12 km großes Gebiet im Nordteil der Stadt zu bestimmen. Unter Zuhilfenahme von Informationen über die Dicke der Sedimentschichten, welche im vorhinein schon durch gravimetrische Messungen bestimmt worden war, konnten nach Inversion der H/V-Spektralverhältnisse lokale Scherwellengeschwindigkeitsprofile und nach Interpolation zwischen den einzelnen Profilen ein dreidimensionales Modell berechnet werden. Darüberhinaus wurde mit den verfügbaren Daten untersucht, ob auf lokaler Ebene ein Zusammenhang zwischen der mittleren Scherwellengeschwindigkeit in den obersten 30 m (vs30) und dem Gefälle existiert, ein Verfahren, welches kürzlich von Wald und Allen (2007) vorgestellt wurde. Da für jede lithologische Einheit eine starke Streuung für die seismischen Geschwindigkeiten gefunden wurde, konnte kein Zusammenhang zwischen dem Gefälle und vs30 hergestellt werden; demgegenüber besteht zumindest ein tendenzieller Zusammenhang zwischen vs30 und der unterliegenden Geologie. Ein Vergleich der Verteilung von vs30 mit den MKS-Intensitäten für das 1985 Valparaiso-Erdbeben in Santiago zeigt, dass hohe Intensitätswerte vor allem in Bereichen geringer vs30-Werte und dicker Sedimentschichten auftraten. Weiterhin ermöglichte die Kenntnis über das Sedimentbeckens Simulationen der Bodenbewegung mittels eines spektralen-Elemente-Verfahrens. Die Simulation eines regionalen Erdbebens, welches auch von einem dichten seismischen Netzwerk aufgezeichnet wurde, das im Stadtgebiet von Santiago infolge des Maule-Erdbebens am 27. Februar 2010 installiert wurde, zeigt, dass das Modell des Sedimentbeckens realistische Berechnungen hinsichtlich Amplitude, Dauer und Frequenz erlaubt und die ausgeprägte Topographie in Verbindung mit der Form der Grenzfläche zwischen den Sedimenten und dem Festgestein starken Einfluss auf die Bodenbewegung haben. Weitere Untersuchungen zur Abhängigkeit der Bodenerschütterung von der Position des Hypozentrums für ein hypothetisches Erdbeben an der San Ramón-Verwerfung, welche die östlichen Vororte der Stadt kreuzt, zeigen, dass die ungünstige Wechselwirkung zwischen dem Verlauf des Bruchs, der Abstrahlung der Energie und der komplexen geologischen Gegebenheiten hohe Werte bei der maximalen Bodengeschwindigkeit erzeugen kann. Dies führt zu einer signifikanten Zunahme des seismischen Risikos für Santiago de Chile. KW - Standorteffekte KW - seismisches Rauschen KW - Sedimentbecken KW - Simulation KW - site effects KW - seismic noise KW - sedimentary basin KW - simulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-52961 ER - TY - THES A1 - Kieling, Katrin T1 - Quantification of ground motions by broadband simulations T1 - Quantifizierung von Bodenbewegung durch Breitband-Simulationen N2 - In many procedures of seismic risk mitigation, ground motion simulations are needed to test systems or improve their effectiveness. For example they may be used to estimate the level of ground shaking caused by future earthquakes. Good physical models for ground motion simulation are also thought to be important for hazard assessment, as they could close gaps in the existing datasets. Since the observed ground motion in nature shows a certain variability, part of which cannot be explained by macroscopic parameters such as magnitude or position of an earthquake, it would be desirable that a good physical model is not only able to produce one single seismogram, but also to reveal this natural variability. In this thesis, I develop a method to model realistic ground motions in a way that is computationally simple to handle, permitting multiple scenario simulations. I focus on two aspects of ground motion modelling. First, I use deterministic wave propagation for the whole frequency range – from static deformation to approximately 10 Hz – but account for source variability by implementing self-similar slip distributions and rough fault interfaces. Second, I scale the source spectrum so that the modelled waveforms represent the correct radiated seismic energy. With this scaling I verify whether the energy magnitude is suitable as an explanatory variable, which characterises the amount of energy radiated at high frequencies – the advantage of the energy magnitude being that it can be deduced from observations, even in real-time. Applications of the developed method for the 2008 Wenchuan (China) earthquake, the 2003 Tokachi-Oki (Japan) earthquake and the 1994 Northridge (California, USA) earthquake show that the fine source discretisations combined with the small scale source variability ensure that high frequencies are satisfactorily introduced, justifying the deterministic wave propagation approach even at high frequencies. I demonstrate that the energy magnitude can be used to calibrate the high-frequency content in ground motion simulations. Because deterministic wave propagation is applied to the whole frequency range, the simulation method permits the quantification of the variability in ground motion due to parametric uncertainties in the source description. A large number of scenario simulations for an M=6 earthquake show that the roughness of the source as well as the distribution of fault dislocations have a minor effect on the simulated variability by diminishing directivity effects, while hypocenter location and rupture velocity more strongly influence the variability. The uncertainty in energy magnitude, however, leads to the largest differences of ground motion amplitude between different events, resulting in a variability which is larger than the one observed. For the presented approach, this dissertation shows (i) the verification of the computational correctness of the code, (ii) the ability to reproduce observed ground motions and (iii) the validation of the simulated ground motion variability. Those three steps are essential to evaluate the suitability of the method for means of seismic risk mitigation. N2 - In vielen Verfahren zur Minimierung seismischen Risikos braucht man Seismogramme, um die Effektivität von Systemen zu testen oder diese zu verbessern. So können realistische Bodenbewegungen genutzt werden, um das Ausmaß der Erschütterungen durch zukünftige Erdbeben abzuschätzen. Gute physikalische Bodenbewegungsmodelle haben auch das Potential, Lücken in den beobachteten Datensätzen zu schließen und somit Gefährdungsabschätzungen zu verbessern. Da die in der Natur beobachtete Bodenbewegung einer gewissen Variabilität unterliegt, von der ein Teil nicht durch makroskopische Parameter wie Magnitude oder Position des Erdbebens erklärt werden kann, ist es wünschenswert, dass ein gutes physikalisches Modell nicht nur ein einzelnes Seismogramm produziert, sondern auch die natürliche Variabilität widerspiegelt. In dieser Arbeit beschreibe ich eine Methode zur Modellierung von realistischen Bodenbewegungen, die – aufgrund ihrer einfachen Modellkonfiguration – mehrere Szenario-Simulationen ermöglicht. Dabei konzentriere ich mich auf zwei Aspekte: Einerseits nutze ich ein deterministisches Verfahren für die Wellenausbreitung für den gesamten Frequenzbereich, von der statischen Deformation bis etwa 10 Hz, unter Berücksichtigung der Variabilität der Quelle durch die Einbeziehung von selbstähnlichen Slipverteilungen und rauen Störungsflächen. Andererseits skaliere ich das Quellspektrum so, dass die modellierte Wellenform die abgestrahlte seismische Ener-gie wiedergibt. Damit überprüfe ich, ob die Energie-Magnitude als Stellgröße geeignet ist, die den Anteil der Energie beschreibt, der im Hochfrequenzbereich abgestrahlt wird. Der Vorteil der Energie- Magnitude ist, dass diese aus Beobachtungen, sogar in sehr kurzer Zeit, ermittelt werden kann. Anwendungen der entwickelten Methode für das Wenchuan (China) Erdbeben von 2008, das Tokachi-Oki (Japan) Erdbeben von 2003 und das Northridge (Kalifornien, USA) Erdbeben von 1994 demonstrieren, dass durch eine feine Diskretisierung und kleinskalige Variabilität in der Quelle hohe Frequenzen ausreichend in die Wellenform eingeführt werden, was den deterministischen Ansatz auch im Hochfrequenzbereich bestätigt. Ich zeige, dass die Energie-Magnitude verwendet werden kann um den Hochfrequenzanteil in Bodenbewegungssimulationen zu kalibrieren. Da die determistische Wellenausbreitung auf den gesamten Frequenzbereich angewandt wird, können die Variabilitäten, die durch parametrische Unsicherheiten in der Quellbeschreibung entstehen, beziffert werden. Zahlreiche Simulationen für ein M=6 Beben zeigen, dass die Rauigkeit der Quelle und die Slipverteilung durch Minderung der Direktivitätseffekte die simulierte Variabilität der Bodenbewegung geringfügig verringern. Dagegen haben die Bruchgeschwindigkeit und die Lage des Hypozentrums einen stärkeren Einfluss auf die Variabilität. Die Unsicherheit in der Energie-Magnitude dagegen führt zu großen Unterschieden zwischen verschiedenen Erdbebensimulationen, welche größer sind als die beobachtete Variabilität von Bodenbewegungen. In Bezug auf die vorgestellte Methode zeigt diese Arbeit (i) den Nachweis der Richtigkeit des Computerprogramms, (ii) die Eignung zur Modellierung beobachteter Bodenbewegung und (iii) den Vergleich der simulierten Variabilität von Bodenbewegung mit der beobachteten. Dies sind die ersten drei Schritte auf dem Weg zur Nutzbarkeit von Bodenbewegungssimulationen in Maßnahmen zur Verminderung des seismischen Risikos. KW - ground motions KW - earthquake KW - simulation KW - seismic risk KW - ground motion variability KW - Bodenbewegung KW - Erdbeben KW - seismisches Risiko KW - Simulation KW - Variabilität von Bodenbewegung Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85989 ER - TY - GEN A1 - Al-Halbouni, Djamil A1 - Holohan, Eoghan P. A1 - Taheri, Abbas A1 - Schöpfer, Martin P. J. A1 - Emam, Sacha A1 - Dahm, Torsten T1 - Geomechanical modelling of sinkhole development using distinct elements BT - model verification for a single void space and application to the Dead Sea area T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Mechanical and/or chemical removal of material from the subsurface may generate large subsurface cavities, the destabilisation of which can lead to ground collapse and the formation of sinkholes. Numerical simulation of the interaction of cavity growth, host material deformation and overburden collapse is desirable to better understand the sinkhole hazard but is a challenging task due to the involved high strains and material discontinuities. Here, we present 2-D distinct element method numerical simulations of cavity growth and sinkhole development. Firstly, we simulate cavity formation by quasi-static, stepwise removal of material in a single growing zone of an arbitrary geometry and depth. We benchmark this approach against analytical and boundary element method models of a deep void space in a linear elastic material. Secondly, we explore the effects of properties of different uniform materials on cavity stability and sinkhole development. We perform simulated biaxial tests to calibrate macroscopic geotechnical parameters of three model materials representative of those in which sinkholes develop at the Dead Sea shoreline: mud, alluvium and salt. We show that weak materials do not support large cavities, leading to gradual sagging or suffusion-style subsidence. Strong materials support quasi-stable to stable cavities, the overburdens of which may fail suddenly in a caprock or bedrock collapse style. Thirdly, we examine the consequences of layered arrangements of weak and strong materials. We find that these are more susceptible to sinkhole collapse than uniform materials not only due to a lower integrated strength of the overburden but also due to an inhibition of stabilising stress arching. Finally, we compare our model sinkhole geometries to observations at the Ghor Al-Haditha sinkhole site in Jordan. Sinkhole depth ∕ diameter ratios of 0.15 in mud, 0.37 in alluvium and 0.33 in salt are reproduced successfully in the calibrated model materials. The model results suggest that the observed distribution of sinkhole depth ∕ diameter values in each material type may partly reflect sinkhole growth trends. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1061 KW - rock mass KW - karst KW - dissolution KW - reflection KW - subsidence KW - subrosion KW - collapse KW - simulation KW - scale KW - fault Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-468435 SN - 1866-8372 IS - 1061 ER -