TY - GEN A1 - Andersen, Jane Lund A1 - Egholm, David L. A1 - Faurschou Knudsen, Mads A1 - Jansen, John D. A1 - Nielsen, S. B. T1 - The periglacial engine of mountain erosion BT - Part 1: Rates of frost cracking and frost creep T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - With accelerating climate cooling in the late Cenozoic, glacial and periglacial erosion became more widespread on the surface of the Earth. The resultant shift in erosion patterns significantly changed the large-scale morphology of many mountain ranges worldwide. Whereas the glacial fingerprint is easily distinguished by its characteristic fjords and U-shaped valleys, the periglacial fingerprint is more subtle but potentially prevails in some mid- to high-latitude landscapes. Previous models have advocated a frost-driven control on debris production at steep headwalls and glacial valley sides. Here we investigate the important role that periglacial processes also play in less steep parts of mountain landscapes. Understanding the influences of frost-driven processes in low-relief areas requires a focus on the consequences of an accreting soil mantle, which characterises such surfaces. We present a new model that quantifies two key physical processes: frost cracking and frost creep, as a function of both temperature and sediment thickness. Our results yield new insights into how climate and sediment transport properties combine to scale the intensity of periglacial processes. The thickness of the soil mantle strongly modulates the relation between climate and the intensity of mechanical weathering and sediment flux. Our results also point to an offset between the conditions that promote frost cracking and those that promote frost creep, indicating that a stable climate can provide optimal conditions for only one of those processes at a time. Finally, quantifying these relations also opens up the possibility of including periglacial processes in large-scale, long-term landscape evolution models, as demonstrated in a companion paper. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 530 KW - soil production function KW - mantled hillslopes KW - sediment transport KW - southern Alps KW - New-Zealand KW - ice-sheet KW - bedrock KW - model KW - rock KW - evolution Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-409656 SN - 1866-8372 IS - 530 ER - TY - JOUR A1 - Brooke, Sam A. S. A1 - Whittaker, Alexander C. A1 - Armitage, John J. A1 - Watkins, Stephen E. A1 - D'Arcy, Mitchell T1 - Quantifying sediment transport dynamics on alluvial fans from spatial and temporal changes in Grain Size, Death Valley, California JF - Journal of geophysical research : Earth surface N2 - How information about sediment transport processes is transmitted to the sedimentary record remains a complex problem for the interpretation of fluvial stratigraphy. Alluvial fan deposits represent the condensed archive of sediment transport, which is at least partly controlled by tectonics and climate. For three coupled catchment-fan systems in northern Death Valley, California, we measure grain size across 12 well-preserved Holocene and late-Pleistocene surfaces, mapped in detail from field observations and remote sensing. Our results show that fan surfaces correlated to the late Pleistocene are, on average, 30-50% coarser than active or Holocene fan surfaces. We adopt a self-similar form of grain size distribution based on the observed stability of the ratio between mean grain size and standard deviation downstream. Using statistical analysis, we show that fan surface grain size distributions are self-similar. We derive a relative mobility function using our self-similar grain size distributions, which describes the relative probability of a given grain size being transported. We show that the largest mobile grain sizes are between 20 and 35mm, a value that varies over time and is clearly lower in the Holocene than in the Pleistocene; a change we suggest is due to a drier climate in the Holocene. These results support recent findings that alluvial fan sedimentology can record past environmental change and that these landscapes are potentially sensitive to climatic change over a glacial-interglacial cycle. We demonstrate that the self-similarity methodology offers a means to explore changes in relative mobility of grain sizes from preserved fluvial deposits. Plain Language Summary A key challenge in Earth Science is understanding how landscapes respond to climate. It may be possible to observe measurable differences in certain landscapes settings such as alluvial fans in desert regions. Alluvial fans are believed to be effective recorders of climate, representing a cumulative store of material transported downstream by rainfall-sensitive river systems. In northern Death Valley, California, we measure at high resolution grain size on three alluvial fans with surfaces that date from the Holocene and the arid climate of today to the 20-40% wetter late-Pleistocene epoch. We find that older late-Pleistocene surfaces are coarser on average than surfaces deposited during the modern and Holocene dry period, suggesting a changing sediment transport regime potentially in response to precipitation. We also show that measured grain size distributions within and between surfaces can be successfully normalized based on the decay in mean grain size and variance downstream, exhibiting a self-similar pattern. Finally, we employ a grain size relative mobility model using our field data to establish which grain sizes are likely to be in transport or locked in the substrate. This model predicts that during the wetter late-Pleistocene mobile grain sizes are up to 40% larger than during the Holocene. KW - alluvial fans KW - grain size KW - sediment transport KW - self-similarity KW - fluvial geomorphology KW - Death Valley Y1 - 2018 U6 - https://doi.org/10.1029/2018JF004622 SN - 2169-9003 SN - 2169-9011 VL - 123 IS - 8 SP - 2039 EP - 2067 PB - American Geophysical Union CY - Washington ER - TY - THES A1 - Kämpf, Lucas T1 - Extreme events in geoarchives T1 - Extremereignisse in Geoarchiven BT - deciphering processes of detrital flood layer formation in lake sediments BT - Bildung von Hochwasserlagen in Seesedimenten N2 - A main limitation in the field of flood hydrology is the short time period covered by instrumental flood time series, rarely exceeding more than 50 to 100 years. However, climate variability acts on short to millennial time scales and identifying causal linkages to extreme hydrological events requires longer datasets. To extend instrumental flood time series back in time, natural geoarchives are increasingly explored as flood recorders. Therefore, annually laminated (varved) lake sediments seem to be the most suitable archives since (i) lake basins act as natural sediment traps in the landscape continuously recording land surface processes including floods and (ii) individual flood events are preserved as detrital layers intercalated in the varved sediment sequence and can be dated with seasonal precision by varve counting. The main goal of this thesis is to improve the understanding about hydrological and sedimentological processes leading to the formation of detrital flood layers and therewith to contribute to an improved interpretation of lake sediments as natural flood archives. This goal was achieved in two ways: first, by comparing detrital layers in sediments of two dissimilar peri-Alpine lakes, Lago Maggiore in Northern Italy and Mondsee in Upper Austria, with local instrumental flood data and, second, by tracking detrital layer formation during floods by a combined hydro-sedimentary monitoring network at Lake Mondsee spanning from the rain fall to the deposition of detrital sediment at the lake floor. Successions of sub-millimetre to 17 mm thick detrital layers were detected in sub-recent lake sediments of the Pallanza Basin in the western part of Lago Maggiore (23 detrital layers) and Lake Mondsee (23 detrital layers) by combining microfacies and high-resolution micro X-ray fluorescence scanning techniques (µ-XRF). The detrital layer records were dated by detailed intra-basin correlation to a previously dated core sequence in Lago Maggiore and varve counting in Mondsee. The intra-basin correlation of detrital layers between five sediment cores in Lago Maggiore and 13 sediment cores in Mondsee allowed distinguishing river runoff events from local erosion. Moreover, characteristic spatial distribution patterns of detrital flood layers revealed different depositional processes in the two dissimilar lakes, underflows in Lago Maggiore as well as under- and interflows in Mondsee. Comparisons with runoff data of the main tributary streams, the Toce River at Lago Maggiore and the Griesler Ache at Mondsee, revealed empirical runoff thresholds above which the deposition of a detrital layer becomes likely. Whereas this threshold is the same for the whole Pallanza Basin in Lago Maggiore (600 m3s-1 daily runoff), it varies within Lake Mondsee. At proximal locations close to the river inflow detrital layer deposition requires floods exceeding a daily runoff of 40 m3s-1, whereas at a location 2 km more distal an hourly runoff of 80 m3s-1 and at least 2 days with runoff above 40 m3s-1 are necessary. A relation between the thickness of individual deposits and runoff amplitude of the triggering events is apparent for both lakes but is obviously further influenced by variable influx and lake internal distribution of detrital sediment. To investigate processes of flood layer formation in lake sediments, hydro-sedimentary dynamics in Lake Mondsee and its main tributary stream, Griesler Ache, were monitored from January 2011 to December 2013. Precipitation, discharge and turbidity were recorded continuously at the rivers outlet to the lake and compared to sediment fluxes trapped close to the lake bottom on a basis of three to twelve days and on a monthly basis in three different water depths at two locations in the lake basin, in a distance of 0.9 (proximal) and 2.8 km (distal) to the Griesler Ache inflow. Within the three-year observation period, 26 river floods of different amplitude (10-110 m3s-1) were recorded resulting in variable sediment fluxes to the lake (4-760 g m-2d-1). Vertical and lateral variations in flood-related sedimentation during the largest floods indicate that interflows are the main processes of lake internal sediment transport in Lake Mondsee. The comparison of hydrological and sedimentological data revealed (i) a rapid sedimentation within three days after the peak runoff in the proximal and within six to ten days in the distal lake basin, (ii) empirical runoff thresholds for triggering sediment flux at the lake floor increasing from the proximal (20 m3s-1) to the distal lake basin (30 m3s-1) and (iii) factors controlling the amount of detrital sediment deposition at a certain location in the lake basin. The total influx of detrital sediment is mainly driven by runoff amplitude, catchment sediment availability and episodic sediment input by local sediment sources. A further role plays the lake internal sediment distribution which is not the same for each event but is favoured by flood duration and the existence of a thermocline and, therewith, the season in which a flood occurred. In summary, the studies reveal a high sensitivity of lake sediments to flood events of different intensity. Certain runoff amplitudes are required to supply enough detrital material to form a visible detrital layer at the lake floor. Reasonable are positive feedback mechanisms between rainfall, runoff, erosion, fluvial sediment transport capacity and lake internal sediment distribution. Therefore, runoff thresholds for detrital layer formation are site-specific due to different lake-catchment characteristics. However, the studies also reveal that flood amplitude is not the only control for the amount of deposited sediment at a certain location in the lake basin even for the strongest flood events. The sediment deposition is rather influenced by a complex interaction of catchment and in-lake processes. This means that the coring location within a lake basin strongly determines the significance of a flood layer record. Moreover, the results show that while lake sediments provide ideal archives for reconstructing flood frequencies, the reconstruction of flood amplitudes is a more complex issue and requires detailed knowledge about relevant catchment and in-lake sediment transport and depositional processes. N2 - Die Erforschung von Hochwasserereignissen, ihrer Wiederkehrhäufigkeiten und Entwicklung im Zuge des prognostizierten Klimawandels wird durch die kurzen instrumentellen Datenreihen stark begrenzt. Diese umfassen selten mehr als die letzten 50 bis 100 Jahre. Das Klima verändert sich jedoch in kurzen bis hin zu sehr langen Zeiträumen, welche mehrere tausend Jahre umfassen können. Die Feststellung von Zusammenhängen zwischen Klimaänderungen und dem Auftreten von Hochwasserereignissen bedarf daher längerer Datenreihen. Aus diesem Grund sind in den letzten Jahren Geoarchive als Zeugen vergangener Hochwasserereignisse stärker in den Fokus der Forschung gerückt. Besonders geeignete Archive sind jährlich geschichtete Seesedimente, da Seen natürliche Senken für Stoffflüsse aus der Landschaft darstellen. Sedimenteinträge durch Hochwasserereignisse führen zur Bildung charakteristischer Lagen am Seeboden. Diese Eintragslagen können im Seesediment untersucht und aufgrund der Jahresschichtung mit saisonaler Präzision datiert werden. Das Ziel der vorliegenden Arbeit ist es, das Verständnis über jene Prozesse, die zur Bildung solcher Hochwasserlagen in Seesedimenten führen, zu erweitern und damit zu einer verbesserten Interpretation von Seesedimenten als natürliche Hochwasserarchive beizutragen. Dieses Ziel wurde auf zwei Wegen verfolgt. Zum einen wurden einzelne Hochwasserlagen in zwei unterschiedlichen Seen, Lago Maggiore in Norditalien und Mondsee in Oberösterreich, mit instrumentellen Hochwasserdaten verglichen und zum anderen wurden Prozesse, die zur Bildung von Hochwasserlagen führen, durch ein umfassendes Messnetz im Mondsee überwacht. Für den Vergleich der Hochwasserlagen mit instrumentellen Hochwasserdaten wurden zunächst die zum Teil unter einem Millimeter dünnen Sedimentlagen in den obersten Sedimentschichten aus dem Mondsee und der Pallanzabucht im Westen des Lago Maggiore mittels Mikroskopie und geochemischen Verfahren untersucht. Das Alter jeder einzelnen Lage wurde durch Zählung der Jahresschichten im Mondsee (23 Lagen zwischen 1976 und 2005) und im Lago Maggiore durch detaillierte Korrelation zu einer bereits datierten Kernsequenz (23 Lagen zwischen 1965 und 2006) bestimmt. Die Verbindung der einzelnen Hochwasserlagen zwischen fünf Sedimentkernen im Lago Maggiore und 13 Sedimentkernen im Mondsee zeigte verschiedene räumliche Verbreitungsmuster von Hochwasserlagen auf. Das heißt, dass die Prozesse, die zur Bildung der Hochwasserlagen führen in den beiden Seen unterschiedlich sind. Im Lago Maggiore wird das eingetragene Sediment durch Ströme am Seeboden transportiert. Dagegen erfolgt der Sedimenttransport im Mondsee im oberen Bereich der Wassersäule entlang der Sprungschicht, wo die Temperatur- und Dichteunterschiede im See am größten sind. Weiterhin wurden die Hochwasserlagen mit instrumentellen Abflusszeitreihen der Hauptzuflüsse, dem Toce am Lago Maggiore und der Griesler Ache am Mondsee, verglichen. Die Vergleiche zeigten nicht nur, dass die Hochwasserlagen zeitgleich mit erhöhten Abflüssen auftreten, sondern auch, dass die Ablagerung erst ab einem bestimmten Abflusswert wahrscheinlich wird. Die meisten Hochwasserlagen im Lago Maggiore korrelieren mit Hochwasserereignissen, die einen Tagesabfluss von 600 m3s-1 überschreiten. Im Mondsee ist der Abflusswert zum einen geringer als im Lago Maggiore und zum anderen nicht im ganzen Seebecken gleich, sondern steigt vom Delta (Tagesabfluss: 40 m3s-1) zur Seemitte hin an (stündlicher Abfluss: 80 m3s-1, 2 Tage über 40 m3s-1 Tagesabfluss). Weiterhin wurde für beide Seen eine Beziehung zwischen der Stärke des Abflusses und der Dicke der Hochwasserlagen festgestellt. Diese ist allerdings stark durch Variationen im Sedimenteintrag und in der Verbreitung innerhalb des Seebeckens beeinflusst. Um die Prozesse, welche zur Bildung von Hochwasserlagen führen, besser zu verstehen, wurden im Mondsee und dem Hauptzufluss, der Griesler Ache, verschiedene Messparameter von 2011 bis 2013 aufgezeichnet. Der Niederschlag wurde an verschiedenen Stationen im Einzugsgebiet und der Abfluss sowie die Trübung des Flusswassers am Austritt der Griesler Ache in den Mondsee kontinuierlich gemessen. Im See wurde an zwei Stellen, in 0.9 km und in 2.8 km Entfernung zum Delta der Griesler Ache, Sediment mittels Sedimentfallen gesammelt, zum einen nahe dem Seeboden mit einer zeitlichen Auflösung von drei bis zwölf Tagen und zum anderen monatlich in drei unterschiedlichen Wassertiefen. Innerhalb des dreijährigen Messzeitraums wurden 26 Hochwasserereignisse mit unterschiedlicher Abflussstärke (10-110 m3s-1) aufgezeichnet, die einen unterschiedlichen Sedimenteintrag am Seeboden auslösten (4-760 g m-2d-1). Die räumliche Verteilung des Sediments nach den Hochwasserereignissen deutet wieder auf einen Sedimenttransport im oberen Teil der Wassersäule hin. Durch den Vergleich von Abflussdaten der Griesler Ache und der gefangenen Sedimentmenge für jedes einzelne der 26 Ereignisse konnte zunächst die Zeitspanne zwischen Hochwasserereignis und Sedimentation am Seeboden ermittelt werden. Nahe dem Zufluss wird das Sediment zum größten Teil bereits innerhalb von drei Tagen nach der Hochwasserspitze abgelagert. In der Seemitte dauert die Sedimentation sechs bis zehn Tage. Des Weiteren wurden, ähnlich wie bereits bei der Untersuchung der Hochwasserlagen festgestellt, bestimmte Abflusswerte detektiert über welchen ein erhöhter Sedimenteintrag am Seeboden gemessen wurde. Nahe dem Flussdelta führen Hochwasser mit mehr als 20 m3s-1 Spitzenabfluss zum erhöhten Sedimenteintrag, während in der Seemitte ein Spitzenabfluss von 30 m3s-1 notwendig ist. Obwohl ein statistischer Zusammenhang zwischen der Hochwasserstärke und der abgelagerten Sedimentmenge besteht, wurde gezeigt, dass weitere Faktoren die Sedimentation am Seeboden beeinflussen. Der Sedimenteintrag in den See wird neben der Abflussstärke durch die Sedimentverfügbarkeit im Einzugsgebiet und episodischen Sedimenteinträgen von lokalen Quellen bestimmt. Eine weitere Rolle spielt die Verteilung des Sediments innerhalb des Seebeckens. Diese ist nicht für jedes Hochwasserereignis gleich, sondern wird durch die Dauer des Hochwasserereignisses und die Existenz der Sprungschicht in den Sommermonaten limitiert. Insgesamt zeigen die Untersuchungen, dass Seesedimente Hochwasserereignisse unterschiedlicher Stärke aufzeichnen. Eine bestimmte Hochwasserstärke ist notwendig, damit ausreichend Sediment für eine sichtbare Hochwasserlage am Seeboden abgelagert wird. Die Ursache ist der Einfluss von Niederschlags- und Abflussstärke auf Erosion, Sedimenttransport im Fluss und die Sedimentverteilung innerhalb des Seebeckens. Da diese Faktoren in unterschiedlichen Seen verschieden wirken, sind die Abflusswerte über denen es zur Hochwasserlagenbildung kommt, in jedem See verschieden. Die Untersuchungen dieser Arbeit zeigen weiterhin, dass die Menge an abgelagertem Sediment am Seeboden nicht nur durch die Abflussstärke bestimmt wird. Die Sedimentation ist vielmehr durch die komplexe Wechselwirkung von Prozessen im Einzugsgebiet und innerhalb des Sees kontrolliert. Dass bedeutet, dass jene Stelle innerhalb eines Seebeckens, an welcher ein Sedimentkern entnommen wird, die Güte eines Hochwasserarchivs maßgeblich beeinflusst. Weiterhin zeigen die Ergebnisse, dass Seesedimente für die Rekonstruktion von Hochwasserhäufigkeiten ideale Archive darstellen. Die Ableitung von Hochwasserstärken aus der Dicke einzelner Hochwasserlagen ist allerdings komplexer und setzt eine detaillierte Kenntnis der relevanten Transport- und Ablagerungsprozesse im See und seinem Einzugsgebiet voraus. KW - lake sediments KW - flood reconstruction KW - sediment transport KW - environmental monitoring KW - Seesedimente KW - Hochwasserrekonstruktion KW - Sedimenttransport KW - Umweltmonitoring Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85961 ER - TY - THES A1 - Mamede, George Leite T1 - Reservoir sedimentation in dryland catchments : modelling and management N2 - Semi-arid environments are mainly characterized by scarce water resources and are usually subject to risks of water stress. In these regions, water supply for drinking and irrigation purposes depends strongly on storage in surface reservoirs and sediment deposition in these reservoirs affects adversely the water storage. In order to reproduce the complex behaviour of sediment deposition in reservoirs located in semi-arid environments and the effects of using sediment management techniques, a reservoir sedimentation model is developed and coupled within the WASA-SED model, which simulates rainfall-runoff processes and sediment transport at the hillslope and river network. The reservoir sedimentation model consists of two modelling approaches, which may be applied according to reservoir size and data availability. For reservoirs with information about their geometric features (reservoir topography, stage-area and stage-volume curves) and physical properties of sediment deposits, such as deposition thickness, grain size distribution of sediment deposits and sediment densities, a detailed modelling approach of reservoir sedimentation may be applied. For reservoirs without those characteristics, a simplified modelling approach is used. The detailed modelling approach of reservoir sedimentation enables the assessment of sediment deposition pattern in reservoirs and the evaluation of sediment release efficiency of sediment management techniques. It simulates sediment transport along the longitudinal profile of a reservoir. The reservoir is divided into cross sections to elaborate the sediment budget. The sediment transport component is calculated using a non-uniform sediment transport approach based on the concept of sediment carrying capacity. Four different sediment-transport equations can be selected for the simulations. The simplified modelling approach of reservoir sedimentation is suitable to simulate water and sediment transfer in dense reservoirs network. Nevertheless, it allows simulating neither sediment management techniques, nor spatial distribution of sedimentation. In this approach, the reservoirs are classified into small and strategic reservoirs according to their location and size. Strategic reservoirs are medium and large-sized reservoirs located on main rivers at the sub-basin’s outlet or reservoirs of particular interest. The small reservoirs are located at tributary streams and represented in the model in an aggregate manner by grouping them into size classes according to their storage capacity. A cascade routing scheme is used to describe the upstream-downstream position of the reservoir classes. The water and sediment balances of small reservoirs are computed for one hypothetical representative reservoir of mean characteristics. Sediment trapping efficiency and effluent grain size distribution are estimated using the overflow rate concept. Three model applications are carried out within this research, as follows: • The detailed modelling approach of reservoir sedimentation is applied to the 92.2 Mm³ Barasona Reservoir, located in the foothills of the Central Pyrenees (Aragon, Spain). A two-stage calibration was performed to account for changes on the sediment deposition pattern caused by sediment management. The reservoir sedimentation model is then validated for another simulation period which confirms that the processes related to reservoir sedimentation are well represented by the model. • An application is carried out to the 933-km² Benguê catchment, located in the semi-arid region of Northeast Brazil. The catchment is characterized by a dense reservoir network, covering almost 45% of the catchment area, with a significant lack of data. Water and sediment balances of those reservoirs are computed using the simplified modelling approach. Three spatial configurations describing the cascade routing scheme are tested. • The reservoir sedimentation model is applied again to the Barasona reservoir to evaluate the sediment release efficiency of sediment management strategies. Cost analysis is presented to help in the choice of the most promising sediment management technique for that situation. Thus, the model enables the assessment of technical features of the sediment management strategies. Overall, simulation results are characterized by large uncertainties, partly due to low data availability and also due to uncertainties of the model structure to adequately represent the processes related to reservoir sedimentation. N2 - Semiaride Gebiete sind hauptsächlich durch geringe Wasserressourcen gekennzeichnet und unterliegen häufig dem Risiko der Wasserknappheit. In diesen Gebieten ist die Wasserbereitstellung für Bewässerung und Trinkwasserversorgung stark von der oberflächlichen Speicherung in Stauseen abhängig, deren Wasserverfügbarkeit nachteilig durch Sedimentablagerung beeinflusst wird. Zur Wiedergabe des komplexen Sedimentablagerungsverhaltens in Stauseen von semiariden Gebieten und die Auswirkungen von Sedimentmanagementmaßnahmen wird ein Sedimentationsmodell entwickelt und mit dem WASA-SED Modell gekoppelt, das für die Modellierung der Abflussbildung und des Sedimenttransportes in Einzugsgebieten geeignet ist. Das Sedimentationsmodell beinhaltet zwei Ansätze, die unter der Berücksichtigung verschiedener Stauseengrößenklassen und Datenverfügbarkeit eingesetzt werden können. Für die Stauseen mit verfügbaren Informationen über ihre geometrischen Eigenschaften (wie Stauseetopographie und Höhe-Fläche-Volumen-Beziehung) und weitere Kenngrößen wie Ablagerungsmächtigkeit, Korngrößenverteilung und Sedimentdichte, kann ein detaillierter Modellansatz für die Sedimentablagerung verwendet werden. Wo diese Informationen nicht verfügbar sind, wird auf einen vereinfachten Ansatz zurückgegriffen. Der detaillierte Modellansatz ermöglicht die Betrachtung von Ablagerungsmustern im Stausee und Einschätzungen über die Effektivität von Sedimentmanagementmaßnahmen hinsichtlich der Sedimententlastung. Dieser Ansatz beruht auf der Simulation des Sedimenttransportes entlang eines Stauseelängsprofils. Für die Berechnung des Sedimenttransfers wird der Stauseekörper in einer Folge von Querprofilen repräsentiert. Der Sedimenttransport wird dabei korngrößenspezifisch entsprechend der Transportkapazität berechnet. Dafür stehen vier verschiedenen Sedimenttransportgleichungen zur Verfügung. Der vereinfachte Modellansatz ist für die Simulation des Sedimenttransfers in Gebieten mit hoher Stauseedichte geeignet, jedoch können weder Sedimentmanagementmaßnahmen noch die räumliche Verteilung der Ablagerungen berücksichtigt werden. Dafür werden die Stauseen in Abhängigkeit von ihrer Größe und Position in kleine und strategische Stauseen unterteilt. Dabei sind strategische Stausseen solche mit mittlerem bis großem Volumen sowie einer Lage im Hauptgerinne oder solche mit sonstiger besonderer Bedeutung. Kleine Stauseen hingegen befinden sich an den Nebenflüssen und werden im Modell in aggregierter Form durch ihre Einteilung in Stauseegrößenklassen repräsentiert. Ein Kaskadenverfahren wird für den Wasser- und Sedimentlauf zwischen den Stauseeklassen verwendet. Dabei werden für jede Stauseeklasse der Wasser- sowie Sedimenthaushalt für einen hypothetischen repräsentativen Stausee mit mittleren Eigenschaften berechnet. Die Sedimentaufnahme und die Korngrößenverteilung des abgegebenen Sediments werden mit dem Überlaufanteil-Ansatz berechnet. In dieser Studie werden drei Modellanwendungen vorgestellt: • Für den 92,2 Mio.m³-großen Barasona-Stausee (Vorland der Zentralpyrenäen, Aragon, Spanien) wird die Modellierung der Sedimentablagerung mit dem detaillierten Modellansatz vorgenommen. Die Kalibrierung dafür wurde in zwei Schritten durchgeführt, um Änderungen im Stauseemanagement Rechnung zu tragen. Die ModellValidierung wird schließlich für eine andere Simulationsperiode vorgenommen. Dabei wird ersichtlich, dass die Prozesse der Sedimentablagerung gut durch das Modell wiedergegeben werden. • Das Modell wird auf das 933 km²-große Benguê-Einzugsgebiet, das sich im semiariden Nordosten Brasiliens befindet, angewendet. Dieses Einzugsgebiet ist durch eine hohe Dichte an kleinen Stauseen, charakterisiert, die fast 45% des Gebietes umfasst, wofür jedoch wenige Messdaten verfügbar sind. Deshalb werden der Wasser- und Sedimenttransport mit dem vereinfachten Modellansatz berechnet. Dabei werden drei Konfigurationen des Kaskadenverfahrens getestet. • Die Modellanwendung erfolgt erneut für den Barasona-Stausee bezüglich der Effektivität der Sedimentmanagementmaßnahmen. Eine Kostenanalyse ermöglicht die Auswahl geeigneter Maßnahmen für den Stausee. Dadurch wird eine Beurteilung der verschiedenen Sedimentmanagementstrategien ermöglicht. Im Allgemeinen unterliegen die Simulationsergebnisse großen Unsicherheiten, teilweise wegen der geringen Datenverfügbarkeit, andererseits durch die Unsicherheiten in der Modellstruktur zur korrekten Wiedergabe der Sedimentablagerungsprozesse. T2 - Verlandung von Stauseen in semiariden Gebieten : Modellierung und Management KW - Sedimentation KW - semiarides Gebiet KW - Sedimenttransport KW - reservoir sedimentation KW - sediment management KW - modelling KW - dryland catchments KW - sediment transport Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-17047 ER - TY - THES A1 - Nguyen, Van Manh T1 - Large-scale floodplain sediment dynamics in the Mekong Delta : present state and future prospects T1 - Großskalige Sedimentdynamik im Mekong Delta : aktuelle Situation und zukünftige Entwicklungen N2 - The Mekong Delta (MD) sustains the livelihood and food security of millions of people in Vietnam and Cambodia. It is known as the “rice bowl” of South East Asia and has one of the world’s most productive fisheries. Sediment dynamics play a major role for the high productivity of agriculture and fishery in the delta. However, the MD is threatened by climate change, sea level rise and unsustainable development activities in the Mekong Basin. But despite its importance and the expected threats, the understanding of the present and future sediment dynamics in the MD is very limited. This is a consequence of its large extent, the intricate system of rivers, channels and floodplains and the scarcity of observations. Thus this thesis aimed at (1) the quantification of suspended sediment dynamics and associated sediment-nutrient deposition in floodplains of the MD, and (2) assessed the impacts of likely future boundary changes on the sediment dynamics in the MD. The applied methodology combines field experiments and numerical simulation to quantify and predict the sediment dynamics in the entire delta in a spatially explicit manner. The experimental part consists of a comprehensive procedure to monitor quantity and spatial variability of sediment and associated nutrient deposition for large and complex river floodplains, including an uncertainty analysis. The measurement campaign applied 450 sediment mat traps in 19 floodplains over the MD for a complete flood season. The data also supports quantification of nutrient deposition in floodplains based on laboratory analysis of nutrient fractions of trapped sedimentation.The main findings are that the distribution of grain size and nutrient fractions of suspended sediment are homogeneous over the Vietnamese floodplains. But the sediment deposition within and between ring dike floodplains shows very high spatial variability due to a high level of human inference. The experimental findings provide the essential data for setting up and calibration of a large-scale sediment transport model for the MD. For the simulation studies a large scale hydrodynamic model was developed in order to quantify large-scale floodplain sediment dynamics. The complex river-channel-floodplain system of the MD is described by a quasi-2D model linking a hydrodynamic and a cohesive sediment transport model. The floodplains are described as quasi-2D presentations linked to rivers and channels modeled in 1D by using control structures. The model setup, based on the experimental findings, ignored erosion and re-suspension processes due to a very high degree of human interference during the flood season. A two-stage calibration with six objective functions was developed in order to calibrate both the hydrodynamic and sediment transport modules. The objective functions include hydraulic and sediment transport parameters in main rivers, channels and floodplains. The model results show, for the first time, the tempo-spatial distribution of sediment and associated nutrient deposition rates in the whole MD. The patterns of sediment transport and deposition are quantified for different sub-systems. The main factors influencing spatial sediment dynamics are the network of rivers, channels and dike-rings, sluice gate operations, magnitude of the floods and tidal influences. The superposition of these factors leads to high spatial variability of the sediment transport and deposition, in particular in the Vietnamese floodplains. Depending on the flood magnitude, annual sediment loads reaching the coast vary from 48% to 60% of the sediment load at Kratie, the upper boundary of the MD. Deposited sediment varies from 19% to 23% of the annual load at Kratie in Cambodian floodplains, and from 1% to 6% in the compartmented and diked floodplains in Vietnam. Annual deposited nutrients (N, P, K), which are associated to the sediment deposition, provide on average more than 50% of mineral fertilizers typically applied for rice crops in non-flooded ring dike compartments in Vietnam. This large-scale quantification provides a basis for estimating the benefits of the annual Mekong floods for agriculture and fishery, for assessing the impacts of future changes on the delta system, and further studies on coastal deposition/erosion. For the estimation of future prospects a sensitivity-based approach is applied to assess the response of floodplain hydraulics and sediment dynamics to the changes in the delta boundaries including hydropower development, climate change in the Mekong River Basin and effective sea level rise. The developed sediment model is used to simulate the mean sediment transport and sediment deposition in the whole delta system for the baseline (2000-2010) and future (2050-2060) periods. For each driver we derive a plausible range of future changes and discretize it into five levels, resulting in altogether 216 possible factor combinations. Our results thus cover all plausible future pathways of sediment dynamics in the delta based on current knowledge. The uncertainty of the range of the resulting impacts can be decreased in case more information on these drivers becomes available. Our results indicate that the hydropower development dominates the changes in sediment dynamics of the Mekong Delta, while sea level rise has the smallest effect. The floodplains of Vietnamese Mekong Delta are much more sensitive to the changes compared to the other subsystems of the delta. In terms of median changes of the three combined drivers, the inundation extent is predicted to increase slightly, but the overall floodplain sedimentation would be reduced by approximately 40%, while the sediment load to the Sea would diminish to half of the current rates. These findings provide new and valuable information on the possible impacts of future development on the delta, and indicate the most vulnerable areas. Thus, the presented results are a significant contribution to the ongoing international discussion on the hydropower development in the Mekong basin and its impact on the Mekong delta. N2 - Das Mekong Delta bildet die Existenzgrundlage und Nahrungsquelle für mehrere Millionen Menschen in Vietnam und Kambodscha. Die Sedimentdynamik spielt in diesem Zusammenhang eine große Rolle für die Landwirtschaft und Fischerei im Delta. Klimawandel und zweifelhaft nachhaltige Entwicklungen im Mekong Einzugsgebiet können jedoch diese essentielle Grundlage gefährden. Trotz der hohen Bedeutung des Sedimenthaushaltes für das Delta ist jedoch das Wissen um die räumliche und zeitliche Dynamik der Sedimentdynamik und insbesondere der Sedimentation auf den Überflutungsflächen sehr begrenzt. Dies liegt zum einen an der hohen Komplexität des Deltas mit unzähligen Kanälen, Deichen und hydraulischen Strukturen, zum anderen an dem Mangel an Beobachtungsdaten. Die vorliegende Arbeit zielte daher auf a) die Schaffung einer quantitativen Datenbasis zur Sedimentation auf den Überflutungsflächen, b) auf eine modellbasierte Abschätzung der Sedimentation im gesamten Mekong Delta, und c) auf die Abschätzung des Einflusses relevanter Änderungen in den Randbedingungen auf die zukünftige Sedimentdynamik. Im experimentellen Teil der Arbeit wurde die Sedimentation auf den Überflutungsflächen im vietnamesischen Teil des Deltas mittels Sedimentfallen, die über weite Bereiche des Deltas verteilt wurden, quantitativ inklusive einer Unsicherheitsabschätzung bestimmt. Die Ergebnisse zeigten, dass die Sedimentation räumlich sehr stark variiert, verursacht durch die Komplexität und Diversität des hydraulischen Systems und insbesondere die menschliche Steuerung der hydraulischen Bauten. Die experimentellen Daten geben einen ersten Einblick in die räumliche Variabilität der Sedimentation im Mekong Delta, und bilden die Basis für die Kalibrierung des hydraulischen Modells im nächsten Schritt. Zusätzlich konnten auch die Nährstoffanteile im Sediment bestimmt werden, wodurch eine Basis zur Abschätzung des Nutzens der Sedimente für die Landwirtschaft gelegt wurde. Die Sedimentdynamik wurde mittels eines quasi-2D hydraulischen Modells, das mit einer Sedimenttransportroutine für kohäsive Sedimente gekoppelt wurde, simuliert. Hierbei wurden die hydraulische und die Sedimenttransportroutine unabhängig voneinander mit mehreren Optimierungsfunktionen und Stations-, Feld- und Fernerkundungsdaten kalibriert. Durch die Modellergebnisse konnte zum ersten Mal die räumliche und zeitliche Variabilität des Sedimenttansports und der Sedimentation quantifiziert werden. Diese großskalige Quantifizierung bildet zudem die Basis für eine ökonomische Nutzensabschätzung der Sedimente für die Landwirtschaft und Fischerei. Mittels des entwickelten und kalibrierten Modells konnten auch zukünftige Entwicklungen abgeschätzt werden. Hierzu wurde ein Verfahren basierend auf einem Sensitivitätsansatz implementiert, mittels dessen die Auswirkungen des Baus von Staudämmen im Mekong Einzugsgebiet, des Klimawandels auf den Abfluss und Sedimenttransport aus dem Mekong Einzugsgebiet und des effektiven Meeresspiegelanstiegs auf die Sedimentdynamik im Delta einzeln in verschiedenen Ausprägungsstufen als auch kombiniert quantifiziert werden konnte. Durch diese Kombinationen können alle möglichen zukünftigen Entwicklungen basierend auf dem jetzigen Kenntnisstand betrachtet werden. Von den betrachteten Faktoren hat der Bau von Staudämmen den größten Einfluss auf die Sedimentdynamik im Delta, insbesondere auf den vietnamesischen Teil des Deltas. Der Klimawandel hat das Potential diese Änderungen partiell zu dämpfen, aber auch zu verstärken. Die Änderungen im Meeresspiegel haben den geringsten Effekt, beschränken sich in den Auswirkungen auf den Vietnamesischen Teil und modulieren im Wesentlichen die Auswirkungen des Klimawandels. Diese Ergebnisse liefern somit neue quantitative Erkenntnisse zur möglichen zukünftigen Sedimentdynamik im Mekong Delta, identifiziert die verwundbarsten Regionen und trägt dadurch zur internationalen kontroversen Diskussion über die Auswirkungen des Staudammbaus im Mekong bei. KW - Mekong Delta KW - Sedimentfallen KW - Sedimentation KW - Sedimenttransportroutine KW - Staudämme KW - Mekong Delta KW - sediment trap KW - floodplain sedimentation KW - sediment transport KW - hydropower dam impact Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72512 ER - TY - GEN A1 - Skinner, Christopher J. A1 - Coulthard, Tom J. A1 - Schwanghart, Wolfgang A1 - Van De Wiel, Marco J. A1 - Hancock, Greg T1 - Global sensitivity analysis of parameter uncertainty in landscape evolution models T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The evaluation and verification of landscape evolution models (LEMs) has long been limited by a lack of suitable observational data and statistical measures which can fully capture the complexity of landscape changes. This lack of data limits the use of objective function based evaluation prolific in other modelling fields, and restricts the application of sensitivity analyses in the models and the consequent assessment of model uncertainties. To overcome this deficiency, a novel model function approach has been developed, with each model function representing an aspect of model behaviour, which allows for the application of sensitivity analyses. The model function approach is used to assess the relative sensitivity of the CAESAR-Lisflood LEM to a set of model parameters by applying the Morris method sensitivity analysis for two contrasting catchments. The test revealed that the model was most sensitive to the choice of the sediment transport formula for both catchments, and that each parameter influenced model behaviours differently, with model functions relating to internal geomorphic changes responding in a different way to those relating to the sediment yields from the catchment outlet. The model functions proved useful for providing a way of evaluating the sensitivity of LEMs in the absence of data and methods for an objective function approach. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1084 KW - self-organized criticality KW - rainfall variability KW - sediment transport KW - periglacial engine KW - hydraulic models KW - numerical models KW - mountain erosion KW - river KW - catchment KW - scale Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-468013 SN - 1866-8372 IS - 1084 SP - 4873 EP - 4888 ER - TY - GEN A1 - Wickert, Andrew D. A1 - Schildgen, Taylor F. T1 - Long-profile evolution of transport-limited gravel-bed rivers T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Alluvial and transport-limited bedrock rivers constitute the majority of fluvial systems on Earth. Their long profiles hold clues to their present state and past evolution. We currently possess first-principles-based governing equations for flow, sediment transport, and channel morphodynamics in these systems, which we lack for detachment-limited bedrock rivers. Here we formally couple these equations for transport-limited gravel-bed river long-profile evolution. The result is a new predictive relationship whose functional form and parameters are grounded in theory and defined through experimental data. From this, we produce a power-law analytical solution and a finite-difference numerical solution to long-profile evolution. Steady-state channel concavity and steepness are diagnostic of external drivers: concavity decreases with increasing uplift rate, and steepness increases with an increasing sediment-to-water supply ratio. Constraining free parameters explains common observations of river form: to match observed channel concavities, gravel-sized sediments must weather and fine – typically rapidly – and valleys typically should widen gradually. To match the empirical square-root width–discharge scaling in equilibrium-width gravel-bed rivers, downstream fining must occur. The ability to assign a cause to such observations is the direct result of a deductive approach to developing equations for landscape evolution. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 680 KW - bedrock incision models KW - sediment transport KW - landscape response KW - stream-power KW - alluvial river KW - size distribution KW - channel changes KW - basin geometry KW - grain-size KW - flow Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-425718 SN - 1866-8372 IS - 680 ER -