TY - GEN A1 - Kumke, Michael Uwe A1 - Frimmel, Fritz Hartmann T1 - Stationary and time-resolved fluorescence for humic substances characterization N2 - Steady-state and time-resolved fluorescence methods were applied to investigate the fluorescence properties of humic substances of different origins. Using standard 2D emission and total luminescence spectra, fluorescence maxima, the width of the fluorescence band and a relative fluorescence quantum efficiency were determined. Different trends for fulvic acids and humic acids were observed indicating differences in the heterogeneity of the sample fractions. The complexity of the fluorescence decay of humic substances is discussed and compared to simple model compounds. The effect of oxidation of humic substances on their fluorescence properties is discussed as well. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 014 Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12353 ER - TY - THES A1 - Note, Carine T1 - Influence of hydrophobically modified polyelectrolytes on nanoparticle synthesis in self-organized systems and in water T1 - Einfluss von hydrophob modifizierten Polyelektrolyten auf die Nanopartikelsynthese in selbst-organisierten Systemen und in Wasser N2 - The formation of colloids by the controlled reduction, nucleation, and growth of inorganic precursor salts in different media has been investigated for more than a century. Recently, the preparation of ultrafine particles has received much attention since they can offer highly promising and novel options for a wide range of technical applications (nanotechnology, electrooptical devices, pharmaceutics, etc). The interest derives from the well-known fact that properties of advanced materials are critically dependent on the microstructure of the sample. Control of size, size distribution and morphology of the individual grains or crystallites is of the utmost importance in order to obtain the material characteristics desired. Several methods can be employed for the synthesis of nanoparticles. On the one hand, the reduction can occur in diluted aqueous or alcoholic solutions. On the other hand, the reduction process can be realized in a template phase, e.g. in well-defined microemulsion droplets. However, the stability of the nanoparticles formed mainly depends on their surface charge and it can be influenced with some added protective components. Quite different types of polymers, including polyelectrolytes and amphiphilic block copolymers, can for instance be used as protecting agents. The reduction and stabilization of metal colloids in aqueous solution by adding self-synthesized hydrophobically modified polyelectrolytes were studied in much more details. The polymers used are hydrophobically modified derivatives of poly(sodium acrylate) and of maleamic acid copolymers as well as the commercially available branched poly(ethyleneimine). The first notable result is that the polyelectrolytes used can act alone as both reducing and stabilizing agent for the preparation of gold nanoparticles. The investigation was then focused on the influence of the hydrophobic substitution of the polymer backbone on the reduction and stabilization processes. First of all, the polymers were added at room temperature and the reduction process was investigated over a longer time period (up to 8 days). In comparison, the reduction process was realized faster at higher temperature, i.e. 100°C. In both cases metal nanoparticles of colloidal dimensions can be produced. However, the size and shape of the individual nanoparticles mainly depends on the polymer added and the temperature procedure used. In a second part, the influence of the prior mentioned polyelectrolytes was investigated on the phase behaviour as well as on the properties of the inverse micellar region (L2 phase) of quaternary systems consisting of a surfactant, toluene-pentanol (1:1) and water. The majority of the present work has been made with the anionic surfactant sodium dodecylsulfate (SDS) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) since they can interact with the oppositely charged polyelectrolytes and the microemulsions formed using these surfactants present a large water-in-oil region. Subsequently, the polymer-modified microemulsions were used as new templates for the synthesis of inorganic particles, ranging from metals to complex crystallites, of very small size. The water droplets can indeed act as nanoreactors for the nucleation and growth of the particles, and the added polymer can influence the droplet size, the droplet-droplet interactions, as well as the stability of the surfactant film by the formation of polymer-surfactant complexes. One further advantage of the polymer-modified microemulsions is the possibility to stabilize the primary formed nanoparticles via a polymer adsorption (steric and/or electrostatic stabilization). Thus, the polyelectrolyte-modified nanoparticles formed can be redispersed without flocculation after solvent evaporation. N2 - Die Bildung von Kolloiden durch kontrollierte Reduktion, durch Keimbildung und durch Wachstum anorganischer Precurser in unterschiedlichen Medien wird seit mehr als einem Jahrhundert intensiv beforscht. Vor kurzem hat die Herstellung ultrafeiner Partikel viel Aufmerksamkeit errungen, da sich hieraus vielversprechende neue Möglichkeiten für ein breites Spektrum an technischen Anwendungen (Nanotechnologie, elektrooptische Materialen, Pharmazeutik, usw.) ergeben. Das Interesse leitet sich von der weithin bekannten Tatsache ab, dass die Eigenschaften der „advanced materials“ von der Mikrostruktur der Probe deutlich abhängig sind. Die gezielte Steuerung der Größe, der Größenverteilung und der Morphologie der einzelnen Keime oder Kristallite ist von größter Wichtigkeit, um die gewünschten Eigenschaften zu erreichen. Verschiedene Methoden können für die Synthese von Nanopartikel verwendet werden. Einerseits kann eine Reduktion in verdünnten wässrigen oder alkoholischen Lösungen stattfinden, andererseits kann der Reduktionsprozess in einer Templatphase, z.B. in definierten Mikroemulsionströpfchen stattfinden. Die Stabilität der produzierten Nanopartikel hängt hauptsächlich von ihrer Oberflächenladung ab, welche durch schützende Komponenten zusätzlich beeinflusst werden kann. Verschiedene Arten von Polymeren, einschließlich Polyelektrolyte und amphiphile Blockcopolymere, können als solche Komponenten benutzt werden. Die Reduktion und Stabilisierung von Metallkolloiden in der wässrigen Lösung durch Addition von hydrophob modifizierten Polyelektrolyten werden bereits ausführlich studiert. Die verwendeten Polymere sind hydrophob modifizierte Derivate des Natrium-Polyacrylat, der Maleinsäure Copolymere sowie das verzweigte Poly(ethylenimin). Erstaunlicherweise genügt bereits die Anwesenheit die verwendeten Polyelektrolyte zu Reduzierung und Stabilisierung der Goldnanopartikel. Darüber hinaus wurde der Einfluss der hydrophoben Seitenkette des Polymer auf den Reduktions- und Stabilisierungsprozess bei unterschiedliche Reaktionstemperatur untersucht. In beiden Fällen können Metallnanopartikel kolloidaler Größe hergestellt werden, jedoch hängt die Größe und die Form der einzelnen Nanopartikel hauptsächlich vom dem zugefügten Polymer und vom verwendeten Temperaturverfahren ab. Im zweiten Teil wurde der Einfluss der vorher erwähnten Polyelektrolyte auf das Phaseverhalten sowie auf die Eigenschaften der inversen mizellaren Region (L2 Phase) der quaternären Systeme untersucht, die aus einem Tensid, Toluol-Pentanol – Gemisch (1:1) sowie Wasser bestehen. Dabei wurden hauptsächlich ionische Tenside, wie z.B. das anionische Natriumdodecylsulfate (SDS) und das kationische Cetyltrimethylammonium-bromid (CTAB) verwendet, da sie mit den geladenen Polyelektrolyten wechselwirken können. Darüber hinaus wurden die polymer-modifizierten Mikroemulsionen als neue Template für die Synthese von anorganischen Nanopartikeln verwendet. Die Wassertröpfchen können in der Tat als Nanoreaktoren für die Keimbildung und das Wachstum der Partikel dienen, und das zugefügte Polymer kann die Tröpfchengröße, die Tröpfchen-Tröpfchen Wechselwirkungen, sowie die Stabilität des Tensidfilms durch Polyelektrolyt-Tensid Komplexbildung beeinflussen. Ein weiterer Vorteil der polymer-modifizierten Mikroemulsionen ist die Stabilizierung der produzierten Primärteilchen über eine Polymeradsorption (durch sterische bzw. elektrostatische Stabilisierung), welche eine Redispergierung der Polyelektrolyte-modifiziert Nanopartikel, nach Lösungsmittel-verdampfung, ohne Aggregation der Partikel erlaubt. KW - Mikroemulsion KW - Nanopartikel KW - Polyelektrolyte KW - microemulsion KW - polyelectrolyte KW - nanoparticle Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-11670 ER - TY - GEN A1 - Dosche, Carsten A1 - Löhmannsröben, Hans-Gerd A1 - Bieser, A. A1 - Dosa, P. I. A1 - Han, S. A1 - Iwamoto, M. A1 - Schleifenbaum, A. A1 - Vollhardt, K. Peter C. T1 - Photophysical properties of [N]phenylenes N2 - In the present study, photophysical properties of [N]phenylenes were studied by means of stationary and time-resolved absorption and fluorescence spectroscopy (in THF at room temperature). For biphenylene (1) and linear [3]phenylene (2a), internal conversion (IC) with quantum yields ΦIC > 0.99 is by far the dominant mechanism of S1 state deactivation. Angular [3]phenylene (3a), the zig-zag [4]- and [5]phenylenes (3b), (3c), and the triangular [4]phenylene (4) show fluorescence emission with fluorescence quantum yieds and lifetimes between ΦF = 0.07 for (3a) and 0.21 for (3c) and τF = 20 ns for (3a) and 81 ns for (4). Also, compounds (3) and (4) exhibit triplet formation upon photoexcitation with quantum yields as high as ΦISC = 0.45 for (3c). The strong differences in the fluorescence properties and in the triplet fromation efficiencies between (1) and (2a) on one hand and (3) and (4) on the other are related to the remarkable variation of the internal conversion (IC) rate constants kIC. A tentative classification of (1) and (2a) as “fast IC compounds”, with kIC > 109 s-1, and of (3) and (4) as “slow IC compounds”, with kIC ≈ 107 s-1, is suggested. This classification cannot simply be related to Hückel’s rule-type concepts of aromaticity, because the group of “fast IC compounds” consists of “antiaromatic” (1) and “aromatic” (2a), and the group of “slow IC compounds” consists of “antiaromatic” (3b), (4) and “aromatic” (3a), (3c). The IC in the [N]phenylenes is discussed within the framework of the so-called energy gap law established for non-radiative processes in benzenoid hydrocarbons. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 001 Y1 - 2002 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-11936 ER - TY - GEN A1 - Löhmannsröben, Hans-Gerd A1 - Beitz, Toralf A1 - Luadien, Robert A1 - Schultze, Rainer T1 - Laser-based ion mobility spectrometry for sensing of aromatic compounds N2 - The drift time spectra of polycyclic aromatic hydrocarbons (PAH), alkylbenzenes and alkylphenylethers were recorded with a laser-based ion mobility (IM) spectrometer. The ion mobilities of all compounds were determined in helium as drift gas. This allows the calculation of the diffusion cross sections (Omegacalc) on the basis of the exact hard sphere scattering model (EHSSM) and their comparison with the experimentally determined diffusion cross sections (Omegaexp). These Omegaexp/Omegacalc-correlations are presented for molecules with a rigid structure like PAH and prove the reliability of the theoretical model and experimental method. The increase of the selectivity of IM spectrometry is demonstrated using resonance enhanced multiphoton ionisation (REMPI) at atmospheric pressure, realized by tuneable lasers. The REMPI spectra of nine alkylbenzenes and alkylphenylethers are investigated. On the basis of these spectra, the complete qualitative distinction of eight compounds in a mixture is shown. These experiments are extended to alkylbenzene isomer mixtures. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 003 KW - Laser KW - REMPI KW - Ion mobility spectrometry KW - PAH Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-11892 ER - TY - GEN A1 - Hörner, Gerald A1 - Lau, Steffen A1 - Kantor, Zoltan A1 - Löhmannsröben, Hans-Gerd T1 - Isotope selective analysis of CO2 with tunable diode laser (TDL) spectroscopy in the NIR N2 - The performance of a home-built tunable diode laser (TDL) spectrometer, aimed at multi-line detection of carbon dioxide, has been evaluated and optimized. In the regime of the (3001)III / (000) band of 12CO2 around 1.6 μm, the dominating isotope species 12CO2, 13CO2, and 12C18O16O were detected simultaneously without interference by water vapor. Detection limits in the range of few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. High sensitivity in conjunction with high precision —typically ±1‰ and ±6‰ for 3% and 0.7% of CO2, respectively— renders this experimental approach a promising analytical concept for isotope-ratio determination of carbon dioxide in soil and breath gas. For a moderate 12CO2 line, the pressure dependence of the line profile was characterized in detail, to account for pressure effects on sensitive measurements. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 020 KW - Isotopenverhältnis KW - Kohlendioxid KW - Diodenlaserspektroskopie KW - Isotope ratio KW - carbon monoxide KW - diode laser spectroscopy Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10167 ER - TY - GEN A1 - Niederkrüger, Matthias A1 - Salb, Christian A1 - Beck, Michael A1 - Hildebrandt, Niko A1 - Löhmannsröben, Hans-Gerd A1 - Marowsky, Gerd T1 - Improvement of a fluorescence immunoassay with a compact diode-pumped solid state laser at 315 nm N2 - We demonstrate the improvement of fluorescence immunoassay (FIA) diagnostics in deploying a newly developed compact diode-pumped solid state (DPSS) laser with emission at 315 nm. The laser is based on the quasi-three-level transition in Nd:YAG at 946 nm. The pulsed operation is either realized by an active Q-switch using an electro-optical device or by introduction of a Cr4+:YAG saturable absorber as passive Q-switch element. By extra-cavity second harmonic generation in different nonlinear crystal media we obtained blue light at 473 nm. Subsequent mixing of the fundamental and the second harmonic in a β-barium-borate crystal provided pulsed emission at 315 nm with up to 20 μJ maximum pulse energy and 17 ns pulse duration. Substitution of a nitrogen laser in a FIA diagnostics system by the DPSS laser succeeded in considerable improvement of the detection limit. Despite significantly lower pulse energies (7 μJ DPSS laser versus 150 μJ nitrogen laser), in preliminary investigations the limit of detection was reduced by a factor of three for a typical FIA. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 016 KW - Immunoassay KW - Fluoreszenz-Resonanz-Energie-Transfer KW - Neodym-YAG-Laser KW - 946 nm KW - 473 nm KW - 315 nm KW - gepulster DPSS Laser KW - sättigbarer Absorber KW - fluorescence immunoassay KW - 946 nm KW - 473 nm KW - 315 nm KW - pulsed DPSS laser Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10150 ER - TY - GEN A1 - Hörner, Gerald A1 - Lau, Steffen A1 - Löhmannsröben, Hans-Gerd T1 - NIR-diode laser spectroscopy for isotope-selective sensing of soil-respired carbon dioxide N2 - The performance of a home-built tunable diode laser (TDL) spectrometer has been optimized regarding multi-line detection of carbon dioxide in natural gases. In the regime of the (3001)III ← (000) band of 12CO2 around 1.6 μm, the dominating isotope species 12CO2, 13CO2, and 12C18O16O were detected simultaneously. In contrast to most established techniques, selective measurements are performed without any sample preparation. This is possible since the CO2 detection is free of interference from water, ubiquitous in natural gases. Detection limits in the range of a few ppmv were obtained for each species utilizing wavelength modulation (WM) spectroscopy with balanced detection in a long-path absorption cell set-up. Linear calibration plots cover a dynamic range of four orders of magnitude, allowing for quantitative CO2 detection in various samples, like soil and breath gas. High isotopic resolution enables the excellent selectivity, sensitivity, and stability of the chosen analytical concept. The obtained isotopic resolution of typically ± 1.0 ‰ and ± 1.5 ‰ (for 3 vol. % and 0.7 vol. % of CO2, respectively) offers a promising analytical tool for isotope-ratio determination of carbon dioxide in soil gas. Preliminary experiments on soil respiration for the first time combine the on-line quantification of the overall carbon dioxide content with an optode sensor and isotopic determination (TDL system) of natural gas species. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 021 KW - Kohlendioxid KW - Isotopenverhältnis KW - Bodengas KW - Diodenlaserspektroskopie KW - tunable diode laser (TDL) KW - carbon dioxide KW - isotope ratios KW - soil gas Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10148 ER - TY - GEN A1 - Lau, Steffen A1 - Salffner, Katharina A1 - Löhmannsröben, Hans-Gerd T1 - Isotopic resolution of carbon monoxide and carbon dioxide by NIR diode laser spectroscopy N2 - Near-infrared (NIR) absorption spectroscopy with tunable diode lasers allows the simultaneous detection of the three most important isotopologues of carbon dioxide (12CO2, 13CO2, 12C18O16O) and carbon monoxide (12CO, 13CO, 12C18O). The flexible and compact fiber-optic tunable diode laser absorption spectrometer (TDLAS) allows selective measurements of CO2 and CO with high isotopic resolution without sample preparation since there is no interference with water vapour. For each species, linear calibration plots with a dynamic range of four orders of magnitude and detection limits (LOD) in the range of a few ppm were obtained utilizing wavelength modulation spectroscopy (WMS) with balanced detection in a Herriott-type multipass cell. The high performance of the apparatus is illustrated by fill-evacuation-refill cycles. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 017 KW - Isotop KW - Kohlenmonoxid KW - Kohlendioxid KW - Diodenlaserspektroskopie KW - isotope KW - carbon monoxide KW - carbon dioxide KW - diode laser spectroscopy Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10135 ER - TY - GEN A1 - Löhmannsröben, Hans-Gerd A1 - Beck, Michael A1 - Hildebrandt, Niko A1 - Schmälzlin, Elmar A1 - van Dongen, Joost T. T1 - New challenges in biophotonics : laser-based fluoroimmuno analysis and in-vivo optical oxygen monitoring N2 - Two examples of our biophotonic research utilizing nanoparticles are presented, namely laser-based fluoroimmuno analysis and in-vivo optical oxygen monitoring. Results of the work include significantly enhanced sensitivity of a homogeneous fluorescence immunoassay and markedly improved spatial resolution of oxygen gradients in root nodules of a legume species. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 018 KW - Sauerstoff KW - Quantenpunkt KW - Lumineszenz KW - Immunoassay KW - Energietransfer KW - Fluoreszenz-Resonanz-Energie-Transfer KW - Nanopartikel KW - Lanthanoide KW - Optode KW - Förster Resonanz Energie Transfer KW - Biophotonik KW - biophotonics KW - nanoparticles KW - immunoassay KW - oxygen KW - optode Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10120 ER - TY - THES A1 - Ba, Jianhua T1 - Nonaqueous synthesis of metal oxide nanoparticles and their assembly into mesoporous materials T1 - Nichtwässrige Synthese von Metalloxid-Nanopartikeln und deren Anordnung zu mesoporösen Materialien N2 - This thesis mainly consist of two parts, the synthesis of several kinds of technologically interesting crystalline metal oxide nanoparticles via nonaqueous sol-gel process and the formation of mesoporous metal oxides using some of these nanoparticles as building blocks via evaporation induced self-assembly (EISA) technique. In the first part, the experimental procedures and characterization results of successful syntheses of crystalline tin oxide and tin doped indium oxide (ITO) nanoparticles are reported. SnO2 nanoparticles exhibit monodisperse particle size (3.5 nm in average), high crystallinity and particularly high dispersibility in THF, which enable them to become the ideal particulate precursor for the formation of mesoporous SnO2. ITO nanoparticles possess uniform particle morphology, narrow particle size distribution (5-10 nm), high crystallinity as well as high electrical conductivity. The synthesis approaches and characterization of various mesoporous metal oxides, including TiO2, SnO2, mixture of CeO2 and TiO2, mixture of BaTiO3 and SnO2, are reported in the second part of this thesis. Mesoporous TiO2 and SnO2 are presented as highlights of this part. Mesoporous TiO2 was produced in the forms of both films and bulk material. In the case of mesoporous SnO2, the study was focused on the high order of the porous structure. All these mesoporous metal oxides show high crystallinity, high surface area and rather monodisperse pore sizes, which demonstrate the validity of EISA process and the usage of preformed crystalline nanoparticles as nanobuilding blocks (NBBs) to produce mesoporous metal oxides. N2 - Diese Arbeit besteht hauptsächlich aus zwei Teilen. Der erste Teil befasst sich mit der Synthese von mehreren technologisch wichtigen, kristallinen Metalloxid-Nanopartikeln mittels nichtwässriger Sol-Gel Chemie. Der zweite Teil beinhaltet die Herstellung von mesoporösen Metalloxiden. Dabei wurden ausgewählte Nanopartikel als Bausteine verwendet und durch langsames Verdampfen des Lösungsmittels in die entsprechenden porösen Strukturen überführt. Das experimentelle Vorgehen wie auch die Charakterisierung der erfolgreich hergestellten Zinnoxid- und Indiumzinnoxid-Nanopartikel sind im ersten Teil beschrieben. Die Zinnoxid-Nanpartikel zeichnen sich durch einheitliche Partikelgrösse (im Durchschnitt ca. 3.5 nm), hoher Kristallinität, und guter Dispergierbarkeit in Tetrahydrofuran aus. Diese Eigenschaften machen aus den Zinnoxid-Nanopartikeln die perfekten Bausteine für den Aufbau von mesoporösem Zinnoxid. Die Indiumzinnoxid-Nanopartikel haben eine einheitliche Partikelform, eine schmale Grösseverteilung (5-10 nm), hohe Kristallinität wie auch gute elektrische Leitfähigkeit. Die Synthese und Charakterisierung von verschiedenen mesoporösen Metalloxiden wie TiO2, SnO2, Mischungen von CeO2 und TiO2, wie auch Mischungen von BaTiO3 und SnO2 werden im zweiten Teil der Arbeit diskutiert. Mesoporöses TiO2 und SnO2 werden als besonders gelungene Beispiele herausgehoben. Mesoporöses TiO2 wurde in Form von Dünnfilmen wie auch als Bulkmaterial hergestellt. Im Falle von SnO2 galt das Augenmerk vor allem der hohen Ordnung der Mesoporen. Alle diese mesoporösen Materialien zeigen eine hohe Kristallinität, grosse Oberfläche und relativ einheitliche Porengrössen. Diese Eigenschaften unterstreichen, wie wertvoll der Ansatz ist, vorgeformte Nanopartikel als Bausteine für die Synthese von porösen Materialien zu verwenden. KW - Nanopartikel KW - transparent-leitendes Oxid KW - Selbstorganisation KW - nanoparticles KW - oxides KW - assembly KW - mesostructure Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-10173 ER - TY - GEN A1 - Beck, Michael A1 - Hildebrandt, Niko A1 - Löhmannsröben, Hans-Gerd T1 - Quantum dots as acceptors in FRET-assays containing serum N2 - Quantum dots (QDs) are common as luminescing markers for imaging in biological applications because their optical properties seem to be inert against their surrounding solvent. This, together with broad and strong absorption bands and intense, sharp tuneable luminescence bands, makes them interesting candidates for methods utilizing Förster Resonance Energy Transfer (FRET), e. g. for sensitive homogeneous fluoroimmunoassays (FIA). In this work we demonstrate energy transfer from Eu3+-trisbipyridin (Eu-TBP) donors to CdSe-ZnS-QD acceptors in solutions with and without serum. The QDs are commercially available CdSe-ZnS core-shell particles emitting at 655 nm (QD655). The FRET system was achieved by the binding of the streptavidin conjugated donors with the biotin conjugated acceptors. After excitation of Eu-TBP and as result of the energy transfer, the luminescence of the QD655 acceptors also showed lengthened decay times like the donors. The energy transfer efficiency, as calculated from the decay times of the bound and the unbound components, amounted to 37%. The Förster-radius, estimated from the absorption and emission bands, was ca. 77 Å. The effective binding ratio, which not only depends on the ratio of binding pairs but also on unspecific binding, was obtained from the donor emission dependent on the concentration. As serum promotes unspecific binding, the overall FRET efficiency of the assay was reduced. We conclude that QDs are good substitutes for acceptors in FRET if combined with slow decay donors like Europium. The investigation of the influence of the serum provides guidance towards improving binding properties of QD assays. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - paper 019 KW - Quantenpunkt KW - Lumineszenz KW - Serum KW - Europium KW - Immunoassay KW - Energietransfer KW - Fluoreszenz-Resonanz-Energie-Transfer KW - Förster-Resonanz-Energie-Transfer KW - Quantum Dot KW - Luminescence KW - Serum KW - Europium KW - Immunoassay KW - Energy Transfer KW - FRET Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-9504 ER - TY - THES A1 - Bhattacharryya, Saroj Kumar T1 - Development of detector for analytical ultracentrifuge. - [korr. Fassung] T1 - Detektor-Entwicklung für die analytische Ultrazentrifuge. - [korr. Fassung] N2 - In this work approaches for new detection system development for an Analytical Ultracentrifuge (AUC) were explored. Unlike its counterpart in chromatography fractionation techniques, the use of a Multidetection system for AUC has not yet been implemented to full extent despite its potential benefit. In this study we tried to couple existing fundamental spectroscopic and scattering techniques that are used in day to day science as tool for extracting analyte information. Trials were performed for adapting Raman, Light scattering and UV/Vis (with possibility to work with the whole range of wavelengths) to AUC. Conclusions were drawn for Raman and Light scattering to be a possible detection system for AUC, while the development for a fast fiber optics based multiwavelength detector was completed. The multiwavelength detector demonstrated the capability of data generation matching the literature and reference measurement data and faster data collection than that of the commercial instrument. It became obvious that with the generation of data in 3-D space in the UV/Vis detection system, the user can select the wavelength for the evaluation of experimental results as the data set contains the whole range of information from UV/Vis wavelength. The detector showed the data generation with much faster speed unlike the commercial instruments. The advantage of fast data generation was exemplified with the evaluation of data for a mixture of three colloids. These data were in conformity with measurement results from normal radial experiments and without significant diffusion broadening. Thus conclusions were drawn that with our designed Multiwavelength detector, meaningful data in 3-D space can be collected with much faster speed of data generation. N2 - In der vorliegenden Arbeit wurde die Entwicklung neuer Detektoren für die Analytische Ultrazentrifugation (AUZ) untersucht und vorangetrieben. Im Gegensatz zu chromatgraphischen. Fraktionierungsmethoden werden Multidetektionssysteme bis heute nicht in der AUZ eingesetzt. Hier wird die Möglichkeit geprüft, bekannte spektroskopische sowie Streumethoden simultan zur Probenanalyse in der AUZ einzusetzen mit dem Ziel, simultan komplimentäre Informationen über die Probe zu erhalten. So wurde versucht, Raman- und UV/VIS-Spektroskopie (letztere mit der Möglichkeit, das gesamte Wellenlängenspektrum auszunutzen) und statische Lichtstreuung zu kombinieren, um das Analytverhalten während des Ultrazentrifugationsexperimentes zu untersuchen. Es wurden zum einen die Ramanspektroskopie als Detektionssystem für chemische Funktionalität in der AUZ geprüft und zum anderen gezeigt, daß die statische Kleinwinkel Lichtstreuung als direkter Molmassendetektor für den Einsatz in der AUZ geeignet erscheint. Zum anderen wurde die Entwicklung eines Multi-Wellenlängen-UV/VIS-Detektors abgeschlossen, um seine Eignung für den Einsatz in der AUZ und die damit verbundene Möglichkeiten der schnelleren und umfassenderen Datenerzeugung gegenüber kommerziellen Geräten zu zeigen. Dieser Multiwellendetektor liefert anstelle eines Absorptionswertes für jede radiale Position in der Messzelle direkt ein ganzes UV-Vis Spektrum und erzeugt eine zusaetzliche Dimension der Messdaten, was die Möglichkeiten der Analyse von komplexen Systemen mit multiplen Chromophoren, Teilchengrößenbestimmung über Wellenlängenabhängigkeit der Trübung oder auch der Datenmittelung enorm vergrößert. Desweiteren erlaubt der Detektor die Anwendung von Geschwindigkeitsprofilen zur Analyse extrem polydisperser Systeme. Die Entwicklung des Detektors beruht auf einem auf Linsen basierenden System mit modularem Aufbau. Dabei war die sorgfältige Ausrichtung des optischen Systems ein essentieller Punkt, um seine Eignung zu überprüfen zu können. An einer Mischung von drei Kolloiden, Halbleiternanopartikeln sowie Proteinen und deren Mischungen ist es hier gelungen, die erfolgreiche Entwicklung des UV/VIS-Detektors zu demonstrieren: Die Daten konnten schneller und mit wesentlich mehr Informationsgehalt, als auf allen kommerziellen Geräten generiert werden. Die Sedimentationskoeffizientenverteilungen stimmen dabei mit denen aus herkömmlichen Sedimentationsgeschwindigkeitsexperimenten überein, unterliegen jedoch nicht einer signifikanten diffusionsbedingten Verbreiterung. Es ist in dieser Arbeit somit gelungen, zum einen die Lichtstreuung als aussichtsreiche Methode für ein Detektorsystem in der AUZ aufzuzeigen, und zum anderen einen Multi-Wellenlängen-UV/VIS-Detektor zu entwickeln, der eine Datenerzeugung von bislang noch nicht erreichter Schnelligkeit im dreidimensionalen Raum ermöglicht. KW - Ultrazentrifuge KW - Detektor KW - Detektor-Entwicklung KW - SLS KW - UV/VIS KW - Raman KW - detector development KW - SLS KW - UV/VIS KW - Raman Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-8215 ER - TY - THES A1 - Nolte, Marc T1 - Integration of freestanding polyelectrolyte multilayer membranes in larger scale structures T1 - Integratrion freistehender Polyelektrolytmembranden in makroskopische Strukturen N2 - Ultrathin, semi-permeable membranes are not only essential in natural systems (membranes of cells or organelles) but they are also important for applications (separation, filtering) in miniaturized devices. Membranes, integrated as diffusion barriers or filters in micron scale devices need to fulfill equivalent requirements as the natural systems, in particular mechanical stability and functionality (e.g. permeability), while being only tens of nm in thickness to allow fast diffusion times. Promising candidates for such membranes are polyelectrolyte multilayers, which were found to be mechanically stable, and variable in functionality. In this thesis two concepts to integrate such membranes in larger scale structures were developed. The first is based on the directed adhesion of polyelectrolyte hollow microcapsules. As a result, arrays of capsules were created. These can be useful for combinatorial chemistry or sensing. This concept was expanded to couple encapsulated living cells to the surface. The second concept is the transfer of flat freestanding multilayer membranes to structured surfaces. We have developed a method that allows us to couple mm2 areas of defect free film with thicknesses down to 50 nm to structured surfaces and to avoid crumpling of the membrane. We could again use this technique to produce arrays of micron size. The freestanding membrane is a diffusion barrier for high molecular weight molecules, while small molecules can pass through the membrane and thus allows us to sense solution properties. We have shown also that osmotic pressures lead to membrane deflection. That could be described quantitatively. N2 - Die Entwicklung von “Labors auf einem Chip” hat in den vergangenen Jahren großes Interesse hervorgerufen. Diese Chips ermöglichen schnelle vor Ort Analytik, wie sie beispielsweise in Arztpraxen oder bei der Schadstoff Überwachung wünschenswert wäre. Die Entwicklung solcher Systeme stellt große Herausforderungen an Forscher verschiedenster Disziplinen. Ein großer Vorteil solcher Systeme sind die verkürzten Reaktionszeiten durch die Verkleinerung der Dimensionen. Membranen, die als Diffusionsbarrieren oder Filter in solche Systeme integriert werden sollen, müssen den Ansprüchen an mechanische Stabilität, Funktionalität (z.B. Permeabilität) bei einer Dicke von einigen 10 nm genügen. Die Reduktion der Membrandicke ist erforderlich um die Diffusionszeiten durch die Membran zu minimieren. Polyelektrolyte sind vielversprechende Kandidaten für solche Membranen, da sie sowohl mechanisch stabil sind, als auch variabel in ihrer Funktionalität In dieser Arbeit werden zwei Konzepte zur Integration solcher Membranen vorgestellt. Das erste Konzept basiert auf der selektiven Adhäsion von Polyelektrolytkapseln auf strukturierten Oberflächen. Für das gewählte Kapselsystem konnte bereits eine große Stabilität und eine breite Funktionalität gezeigt werden. Die Strukturierung wird durch Mikrokontaktdrucken erzielt und führt. zu attraktiven und repulsiven Bereichen auf der Oberfläche. Die Kapesladhäsion findet auf den attraktiven Bereichen statt. Auf diese Weise werden die Kapseln 2-dimensional auf der Oberfläche angeordnet. Die definierte laterale Position der Kapseln ermöglicht Anwendungen in der kombinatorischen Chemie oder der Sensorik. Der makroskopische Transfer von bis zu 50 nm dünnen Polyelektrolytmembranen auf microstrukturierte Substrate ist das zweite präsentierte Konzept zur Integration freistehender Membranen. Dabei entsteht ein großflächiger Bereich (mm2) von Millionen von Hohlräumen mit einem Volumen in der Größe von pL (10-12l). Diese Holräume können mit Reagenzien gefüllt werden. Diese reagieren durch die Membran auf Änderungen in der umgebenden Flüssigkeit. Von besonderem Interesse ist der Aspekt, daß nicht nur eingekapselte Reagenzien als Sensormaterial fungieren können, sondern auch durch die Deformation der Membran Änderungen im osmotischen Druck der Umgebung quantitativ erfaßt werden können. KW - Polyelektrolyt KW - Diffusionsbarriere KW - Freistehende Membranen KW - Kraftsensoren KW - polyelectrolyte membranes KW - force sensors KW - diffusion barrier Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7355 ER - TY - THES A1 - Franke, Danielle T1 - Novel surfactants for the production of functional nanostructured materials via the ionic self-assembly (ISA) route = Neuartige Tenside für die Synthese funktioneller nanostrukturierter Materialien durch ionische Selbsorganisation T1 - Neuartige Tenside für die Synthese funktioneller nanostrukturierter Materialien durch ionische Selbsorganisation N2 - In recent years, the aim of supramolecular syntheses is not only the creation of particular structures but also the introduction of specific functions in these supramolecules. The present work describes the use of the ionic self-assembly (ISA) route to generate nanostructured materials with integrated functionality. Since the ISA strategy has proved to be a facile method for the production of liquid-crystalline materials, we investigated the phase behaviour, physical properties and function of a variety of ISA materials comprising a perylene derivative as the employed oligoelectrolyte. Functionality was introduced into the materials through the use of functional surfactants. In order to meet the requirements to produce functional ISA materials through the use of functional surfactants, we designed and synthesized pyrrole-derived monomers as surfactant building blocks. Owing to the presence of the pyrrole moiety, these surfactants are not only polymerizable but are also potentially conductive when polymerized. We adopted single-tailed and double-tailed N-substituted pyrrole monomers as target molecules. Since routine characterization analysis of the double-tailed pyrrole-containing surfactant indicated very interesting, complex phase behaviour, a comprehensive investigation of its interfacial properties and mesophase behavior was conducted. The synthesized pyrrole-derived surfactants were then employed in the synthesis of ISA complexes. The self-assembled materials were characterized and subsequently polymerized by both chemical and electrochemical methods. The changes in the structure and properties of the materials caused by the in-situ polymerization were addressed. In the second part of this work, the motif investigated was a property rather than a function. Since chiral superstructures have obtained much attention during the last few years, we investigated the possibility of chiral ISA materials through the use of chiral surfactants. Thus, the work involved synthesis of novel chiral surfactants and their incorporation in ISA materials with the aim of obtaining ionically self-assembled chiral superstructures. The results and insights presented here suggest that the presented synthesis strategy can be easily extended to incorporate any kind of charged tectonic unit with desired optical, electrical, or magnetic properties into supramolecular assemblies for practical applications. N2 - Supramolekulare Chemie zielt auf den Aufbau großer Moleküle und neuer Materialien aus kleineren Einheiten. Durch supramolekulare Wechselwirkungen d.h. nicht-kovalente Bindungen, können definierte Ordnungen von Molekülverbänden in Größen von mehreren 100 Mikrometern hergestellt werden. Diese Wechselwirkungen und die daraus resultierenden Anordnungen von Molekülen bestimmen die für Anwendungen relevanten makroskopischen Materialeigenschaften. Es gibt viele verschiedene Wechselwirkungen, die in der Supramolekularen Chemie angewendet werden können. Eine davon ist die ionische Wechselwirkung, die in dieser Arbeit als Triebkraft für die Herstellung supramolekularer Materialien verwendet wird. Diese Strategie wurde vor kurzem ISA (Ionic-Self-Assembly, d.h. Ionische Selbsorganisation) genannt. Die vorliegende Arbeit beschäftigt sich mit der Herstellung funktioneller Nanomaterialen durch die Anwendung der ISA-Strategie. Da sich die ISA-Strategie als einfache Methode für die Produktion von Flüssigkristallen herausstellte, untersuchten wir die Eigenschaften vieler ISA-Materialen, die einen Farbstoffbaustein integriert haben. Die Funktion der Materialien wurde hierbei durch die Verwendung funktioneller Tenside geschaffen. Um die Anforderungen für die Produktion funktioneller ISA-Materialen durch die Nutzung funktioneller Tenside sicherzustellen, wurden Pyrrol-Monomere als Tenside hergestellt. Durch die Pyrrol-Einheiten sind die Tenside polymerisierbar und zeigen danach Potential für Leitfähigkeit. Es wurden Pyrrol-Tenside sowohl mit Einzel- als auch mit Doppelketten synthetisiert. Da die Standardcharakterisierung des Doppelketten-Tensids ein interessantes Phasenverhalten zeigte, wurden umfassende Untersuchungen der Grenzflächeneigenschaften und des mesophasen Verhaltens durchgeführt. Beide Tenside wurden dann in der Produktion von ISA-Materialien verwendet. Die hergestellten Materialen wurden charakterisiert und konnten durch die Pyrrol-Einheit sowohl chemisch als auch elektrochemisch polymerisiert werden. Die aus dieser Polymerisierung resultierenden Änderungen der Eigenschaften, Struktur und Function der Materialen wurden ebenfalls untersucht. Der zweite Teil dieser Arbeit klärt Nutzungsmöglichkeiten chiraler Tenside für die Herstellung chiraler ISA-Strukturen. Obwohl Chiralität keine eigentliche Funktion sondern eine Eigenschaft ist, haben chirale Strukturen in den letzten Jahren viel Aufmerksamkeit bekommen. Deshalb wurden, mit dem Ziel chirale ISA-Strukturen zu erhalten, neue chirale Tenside hergestellt und diese als Bausteine in ISA-Materialien benutzt. Die mit dieser Arbeit gewonnenen Ergebnisse und neuen Einsichten zeigen, dass die ISA-Strategie leicht erweitert werden kann, um jede Art von Bausteine zu integrieren. Dadurch können nanostukturierte Materialien mit gewünschten spezifischen optischen, elektrischen oder elektromagnetischen Eigenschaften für praktische Anwendungen geschaffen werden. KW - Nanotechnologie KW - Tenside KW - ISA KW - Surfactant KW - Nanotechnology KW - self-assembly Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6922 ER - TY - THES A1 - Jovanovic, Ljubisa T1 - New synthetic approaches to 8,5'-neolignans T1 - Neue Synthesewege zur 8,5'-Neolignane N2 - Neolignans, dehydrodimers of phenylpropenes, are natural products that exhibit different biological activities. 8,5’-Neolignans containing a trans- dihydrobenzofuran skeleton are the most abundant neolignans in nature. The published syntheses of trans-dihydrobenzofurans are multistep procedures that are time consuming and provide the product in low yield. Furthermore, all dimerisation reactions either in the presence of enzymes or mediated by metal salts are yielding dimers consisting of two units of the same phenylpropene compound, narrowing substantially the substitution pattern. Two different general synthetic approaches were examined. The first strategy was the enantioselective deprotonation at the α-carbon of the ο-alkyl phenols in the presence of a chiral diamine and sBuLi. Synthesis of several new phosphorous-based directed ortho-metalation groups was studied. The examined compounds having these new groups decomposed even under very mild reaction conditions and are not suitable for the application in the synthesis. The second strategy was to examine one [3+2] cycloaddition reaction, transition metal catalysed Heck oxyarylation reaction, in the synthetic approach to compounds having trans-dihydrobenzofuran skeleton. Palladium catalysed Heck oxyarylation reaction with halogenophenols or ortho-diazonium phenols as the starting material allowed the trans-dihydrobenzofuran compounds as the major products in acceptable yield and in one step. The products were formed under ligand free condition, as well as in the presence of some strong coordinating ligands (Ph3P). The experiments with several chiral ligands, showed that the obtained trans-dihydrobenzofurans were racemic mixtures. This result suggests formation of an achiral intermediate along the reaction pathway, which causes the lack of stereoselectivity in the products. Initially formed trans-dihydrobenzofuran compounds are the key precursors of many naturally occurring neolignans, and can be easily converted to 8,5’-neolignan derivatives. N2 - 8,5’-Neolignane sind Naturstoffe die verschiedene biologische Aktivitäten ausüben. 8,5’-Neolignane mit Dihydrobenzofuran-Kernstruktur haben antioxidative Wirkung und sind als ACAT- und PAF-Inhibitoren bekannt. Zwar gibt es einige stereoselektive Synthesen von 8,5’-Neolignanen, diese sind aber kompliziert und/oder lassen nur ein eingeschränktes Substitutionsmuster zu. In der vorliegenden Dissertation wurden zwei neue Synthesewege, nämlich die Palladium-katalysierte Cycloaddition von o-Halogenphenolen und Phenylpropenen, und die α-Alkylierung, präsentiert. Diese Synthesewege führen diastereoselektiv, in ein bis drei Schritten, zu trans-Dihydrobenzofuranen, den gewünschten, potentiell bioaktiven Zielverbindungen. Ferner wurde gezeigt, dass sich ausdiesen Verbindungen verschiedene 8,5’-Neolignane schnell und einfach herstellen lassen. KW - Dihydrobenzofurane KW - Lignane KW - Palladium KW - 8 KW - 5'-neolignane KW - dihydrobenzofurans KW - palladium KW - neolignans Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6878 ER - TY - THES A1 - Andersen, Audrée T1 - Surfactant dynamics at interfaces : a series of second harmonic generation experiments T1 - Surfactant Dynamik an Grenzflächen : eine Studie über SHG-Experimente N2 - Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants. N2 - Amphiphile vereinen zwei gegensätzliche Strukturelemente in einem Molekül, eine hydrophile Kopfgruppe und ein hydrophobe, meist aliphatische Kette. Aufgrund der molekularen Asymmetrie erfolgt eine spontane Adsorption an der Wasser-Luft Grenzfläche. Die Adsorptionsschicht verändert die makroskopischen Eigenschaften des Materials, z.B. die Grenzflächenspannung wird erniedrigt. Amphiphile sind zentrale Bauelemente der Kolloid- und Grenzflächenforschung, die Phänomene, wie Schäume ermöglichen. Eine Schaumlamelle besteht aus einem dünnen Wasserfilm, der durch zwei Adsorptionsschichten stabilisiert wird. Die Stabilität der Lamelle wird durch die Grenzflächenrheologie entscheidend geprägt. Die wesentliche makroskopische Größe in diesem Zusammenhang ist das so genannte Grenzflächendilatationsmodul E. Es beschreibt die Fähigkeit des Systems die Gleichgewichtsgrenzflächenspannung nach einer Expansion oder Dilatation der Adsorptionschicht wieder herzustellen. Das Modul E ist eine komplexe Größe, in dem der Imaginärteil direkt mit der Schaumstabilität korreliert. Diese Arbeit widmet sich der Grenzflächenrheologie. In der Literatur werden zwei kontroverse Modelle zur Interpretation dieser Größe diskutiert. Diese Modelle werden experimentell in dieser Arbeit überprüft. Dies erfordert die Entwicklung neuer experimenteller Aufbauten basierend auf nichtlinearen, optischen Techniken. Mit diesen Experimenten konnte eines der Modelle bestätigt werden. KW - Tensid KW - Grenzflächenchemie KW - Nichtlineare Spektroskopie KW - Oscillating Bubble KW - surfactants KW - nonlinear optics KW - surface rheology KW - air-water interface KW - oscillating bubble Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6553 ER - TY - THES A1 - Garnier, Sébastien T1 - Novel amphiphilic diblock copolymers by RAFT-polymerization, their self-organization and surfactant properties T1 - Neue Amphiphile Diblockcopolymere mittels RAFT-Polymerisation, ihre Aggregations- und Tensideigenschaften N2 - The Reversible Addition Fragmentation Chain Transfer (RAFT) process using the new RAFT agent benzyldithiophenyl acetate is shown to be a powerful polymerization tool to synthesize novel well-defined amphiphilic diblock copolymers composed of the constant hydrophobic block poly(butyl acrylate) and of 6 different hydrophilic blocks with various polarities, namely a series of non-ionic, non-ionic comb-like, anionic and cationic hydrophilic blocks. The controlled character of the polymerizations was supported by the linear increase of the molar masses with conversion, monomodal molar mass distributions with low polydispersities and high degrees of end-group functionalization. The new macro-surfactants form micelles in water, whose size and geometry strongly depend on their composition, according to dynamic and static light scattering measurements. The micellization is shown to be thermodynamically favored, due to the high incompatibility of the blocks as indicated by thermal analysis of the block copolymers in bulk. The thermodynamic state in solution is found to be in the strong or super strong segregation limit. Nevertheless, due to the low glass transition temperature of the core-forming block, unimer exchange occurs between the micelles. Despite the dynamic character of the polymeric micellar systems, the aggregation behavior is strongly dependent on the history of the sample, i.e., on the preparation conditions. The aqueous micelles exhibit high stability upon temperature cycles, except for an irreversibly precipitating block copolymer containing a hydrophilic block exhibiting a lower critical solution temperature (LCST). Their exceptional stability upon dilution indicates very low critical micelle concentrations (CMC) (below 4∙10-4 g∙L-1). All non-ionic copolymers with sufficiently long solvophobic blocks aggregated into direct micelles in DMSO, too. Additionally, a new low-toxic highly hydrophilic sulfoxide block enables the formation of inverse micelles in organic solvents. The high potential of the new polymeric surfactants for many applications is demonstrated, in comparison to reference surfactants. The diblock copolymers are weakly surface-active, as indicated by the graduate decrease of the surface tension of their aqueous solutions with increasing concentration. No CMC could be detected. Their surface properties at the air/water interface confer anti-foaming properties. The macro-surfactants synthesized are surface-active at the interface between two liquid phases, too, since they are able to stabilize emulsions. The polymeric micelles are shown to exhibit a high ability to solubilize hydrophobic substances in water. N2 - Amphiphile sind Moleküle, die aus einem hydrophilen und einem hydrophoben Molekülteil aufgebaut sind. Beispiele für Amphiphile sind Tenside, deren makromolekulares Pendant amphiphile Block-Copolymere sind, die häufig auch als Makro-Tenside bezeichnet sind. Ihre Lösungseigenschaften in einem selektiven Lösungsmittel, i.e., ein für einen Block gutes und für den anderen schlechtes Lösungsmittel, sind analog zu denen von Tensiden. Die Unverträglichkeit der Polymersegmente führt zu einer von hydrophoben Wechselwirkungen getriebenen Mikrophasenseparation, d.h. zur Selbstorganisation der amphiphilen Makromoleküle zu Mizellen unterschiedlichster Form, während die kovalente Bindung zwischen den Blöcken eine Makrophasenseparation verhindert. Aufgrund ihres besonderen strukturellen Aufbaus adsorbieren Makro-Tenside an Grenzflächen, was zahlreiche Anwendungen, z.B. zur (elektro)sterischen Stabilisierung von Emulsionen und Dispersionen findet. Die vorliegende Arbeit demonstriert, dass die neuen kontrollierten radikalischen Polymerisationen wie die RAFT-Methode („Reversible Addition Fragmentation Chain Transfer“) für die Synthese von neuen wohldefinierten amphiphilen Diblock-Copolymerstrukturen sehr gut geeignet sind. Eine Reihe von neuen amphiphilen Diblock-Copolymeren wurde mittels RAFT synthetisiert, mit einem konstanten hydrophoben Block und verschiedenen hydrophilen Blöcken unterschiedlichster Polaritäten. Die engen Molmassenverteilungen und der lineare Aufstieg der Molmassen mit dem Umsatz belegen den kontrollierten Charakter der Polymerisation. Die thermodynamisch favorisierte Selbstorganisation der synthetisierten Blockcopolymere in Wasser führt zur Bildung von Mizellen, deren Eigenschaften aber von der Präparationsmethode stark abhängig sind. Korrelationen zwischen den Mizelleigenschaften und der Blockcopolymerstruktur zeigen, dass die Mizellgröße vor allem von der Länge des hydrophoben Blocks kontrolliert wird, wohindagegen die Natur des hydrophilen Blocks der entscheidende Faktor für die Mizellgeometrie ist. Die gebildeten Mizellen sind besonders stabil gegenüber Verdünnung und Temperaturzyklen, was ein großer Vorteil für eventuelle Anwendungen ist. Wegen der niedrigen Glasübergangstemperatur des hydrophoben Blocks findet ein Austausch von Makromolekülen zwischen den Mizellen statt, d.h. es handelt sich um dynamische Mizellsysteme. Das Potential der neuen Makrotenside für Anwendungen wurde untersucht. Die Polymermizellen zeigen eine hohe Kapazität wasserunlösliche Substanzen in Wasser zu solubilisieren. Die Blockcopolymere sind grenzflächenaktiv, d.h. sie adsorbieren an Wasser / Luft oder Wasser / Öl Grenzflächen. Entsprechend sind die Blockcopolymere in der Lage, Emulsionen zu stabilisieren oder als Antischaumsubstanzen zu wirken. KW - Blockcopolymere KW - Amphiphile KW - Polymertenside KW - RAFT-Polymerisation KW - Grenzflächenaktivität KW - Amphiphilic diblock copolymers KW - RAFT-Polymerization KW - Surfactants Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-6395 ER - TY - THES A1 - Justynska, Justyna T1 - Towards a library of functional block copolymers : synthesis and colloidal properties T1 - Hin zu einer Bibliothek von funktionalen Blockcopolymeren : Synthese und kolloidale Eigenschaften N2 - Understanding the principles of self-organisation exhibited by block copolymers requires the combination of synthetic and physicochemical knowledge. The ability to synthesise block copolymers with desired architecture facilitates the ability to manipulate their aggregation behaviour, thus providing the key to nanotechnology. Apart from relative block volumes, the size and morphology of the produced nanostructures is controlled by the effective incompatibility between the different blocks. Since polymerisation techniques allowing for the synthesis of well-defined block copolymers are restricted to a limited number of monomers, the ability to tune the incompatibility is very limited. Nevertheless, Polymer Analogue Reactions can offer another possibility for the production of functional block copolymers by chemical modifications of well-defined polymer precursors. Therefore, by applying appropriate modification methods both volume fractions and incompatibility, can be adjusted. Moreover, copolymers with introduced functional units allow utilization of the concept of molecular recognition in the world of synthetic polymers. The present work describes a modular synthetic approach towards functional block copolymers. Radical addition of functional mercaptanes was employed for the introduction of diverse functional groups to polybutadiene-containing block copolymers. Various modifications of 1,2-polybutadiene-poly(ethylene oxide) block copolymer precursors are described in detail. Furthermore, extension of the concept to 1,2-polybutadiene-polystyrene block copolymers is demonstrated. Further investigations involved the self-organisation of the modified block copolymers. Formed aggregates in aqueous solutions of block copolymers with introduced carboxylic acid, amine and hydroxyl groups as well as fluorinated chains were characterised. Study of the aggregation behaviour allowed general conclusions to be drawn regarding the influence of the introduced groups on the self-organisation of the modified copolymers. Finally, possibilities for the formation of complexes, based on electrostatic or hydrogen-bonding interactions in mixtures of block copolymers bearing mutually interacting functional groups, were investigated. N2 - Um die Prinzipien der Selbstorganisation von Blockcopolymeren zu verstehen, ist es notwendig das Wissen auf den Gebieten der Synthese und der Physikochemie zu kombinieren. Die Fähigkeit, Blockcopolymere mit gewünschter Architektur zu synthetisieren, gibt einem auch die Möglichkeit das Aggregationsverhalten zu steuern, was wiederum der Schlüssel zur Nanotechnologie ist. Abgesehen von den relativen Blockvolumina, wird die Größe und Morphologie der gebildeten Nanostrukturen durch die effektive Inkompartibilität zwischen den unterschiedlichen Blöcken bestimmt. Da die Polymerisationstechniken, mit denen man gut definierte Blockcopolymere synthetisieren kann, auf bestimmte Monomere beschränkt sind, läßt sich diese Inkompatibilität nur eingeschränkt abstimmen. Polymeranaloge Reaktionen können dagegen eine Möglichkeit bieten, funktionale Blockcopolymere durch die chemische Modifizierung von gut definierten Copolymeren zu erhalten. Somit können, bei Verwendung von geeigneten Modifikationsmethoden, die Volumenanteile sowie die Inkompatibilität der Blöcke angepasst werden. Außerdem können Copolymere, die funktionelle Gruppe enthalten, es ermöglichen das Prinzip der molekularen Erkennung (Schloss-Schlüssel) auf dem Gebiet der synthetischen Polymere anzuwenden. Die vorleigende Arbeit beschreibt einen Ansatz zur modularen Synthese von funktionalen Blockcopolymeren. Durch radikalische Addition von funktionellen Mercaptanen wurden in Copolymere mit einem Polybutadien-Block verschiedenen funktionelle Gruppen eingebracht. Von 1,2-Polybutadien-Polyethylenoxid Blockcopolymeren werden dabei mehrere Modifikationen im Detail beschrieben. Zudem wird die Erweiterung des Konzepts auf 1,2-Polybutadien-Polystyrol Blockcopolymere gezeigt. Die weiteren Untersuchungen betrafen die Selbstorganisation der modifizierten Blockcopolymere in Lösung. Hierbei wurden die Aggregate, die in wässriger Lösung von Blockcopolymeren mit Carbonsäure-, Amin- und Hydroxylgruppen sowie fluorierte Ketten gebildet werden, charakterisiert. Die Untersuchung des Aggregationsverhaltens erlaubt es, generelle Aussagen über den Einfluss der eingebrachten Gruppen auf die Selbstorganisation der modifizierten Copolymere zu treffen. Abschließend wurde die Bildung von Komplexen auf der Basis von elektrostatischer Wechselwirkung oder Wasserstoffbrückenbindung in Mischungen aus Copolymeren, die untereinander Wechselwirkende funktionale Gruppe besitzen, untersucht. T2 - Towards a library of functional block copolymers : synthesis and colloidal properties KW - Blockcopolymere KW - Funktionalisierung KW - Selbstorganisation KW - Kolloid KW - Komplexe KW - Thiole KW - block copolymers KW - functionalization KW - self-organisation KW - colloids KW - complexes Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5907 ER - TY - THES A1 - Garnweitner, Georg T1 - Nichtwässrige Synthese und Bildungsmechanismus von Übergangsmetalloxid-Nanopartikeln = Nonaqueous synthesis of transition-metal oxide nanoparticles and their formation mechanism T1 - Nichtwässrige Synthese und Bildungsmechanismus von Übergangsmetalloxid-Nanopartikeln N2 - In this work, the nonaqueous synthesis of binary and ternary metal oxide nanoparticles is investigated for a number of technologically important materials. A strong focus was put on studying the reaction mechanisms leading to particle formation upon solvothermal treatment of the precursors, as an understanding of the formation processes is expected to be crucial for a better control of the systems, offering the potential to tailor particle size and morphology. The synthesis of BaTiO3 was achieved by solvothermal reaction of metallic barium and titanium isopropoxide in organic solvents. Phase-pure, highly crystalline particles about 6 nm in size resulted in benzyl alcohol, whereas larger particles could be obtained in ketones such as acetone or acetophenone. In benzyl alcohol, a novel mechanism was found to lead to BaTiO3, involving a C–C coupling step between the isopropoxide ligand and the benzylic carbon of the solvent. The resulting coupling product, 4-phenyl-2-butanol, is found in almost stoichiometric yield. The particle formation in ketones proceeds via a Ti-mediated aldol condensation of the solvent, involving formal elimination of water which induces formation of the oxide. These processes also occurred when reacting solely the titanium alkoxide with ketones or aldehydes, leading to highly crystalline anatase nanoparticles for all tested solvents. In ketones, also the synthesis of nanopowders of lead zirconate titanate (PZT) was achieved, which were initially amorphous but could be crystallized by calcination at moderate temperatures. Additionally, PZT films were prepared by simply casting a suspension of the powder onto Si substrates followed by calcination.Solvothermal synthesis however is not restricted to alkoxides as precursors but is also achieved from metal acetylacetonates. The use of benzylamine as solvent proved particularly versatile, making possible the synthesis of nanocrystalline In2O3, Ga2O3, ZnO and iron oxide from the respective acetylacetonates. During the synthesis, the acetylacetonate ligand undergoes a solvolysis under C–C cleavage, resulting in metal-bound enolate ligands which, in analogy to the synthesis in ketones, induce ketimine and aldol condensation reactions. In the last section of this work, surface functionalization of anatase nanoparticles is explored. The particles were first capped with various organic ligands via a facile in situ route, which resulted in altered properties such as enhanced dispersibility in various solvents. In a second step, short functional oligopeptide segments were attached to the particles by means of a catechol linker to achieve advanced self-assembly properties. N2 - Die vorliegende Arbeit befasst sich mit der nichtwässrigen Synthese binärer und ternärer Metalloxid-Nanopartikel durch solvothermale Behandlung von Metalloxid-Vorstufen in organischen Lösungsmitteln. Dabei wurde besonderes Augenmerk auf die Reaktionsmechanismen gelegt, da eine genaue Kenntnis des Bildungsmechanismus eine bessere Kontrolle über das Partikelwachstum erwarten lässt, woraus sich die Möglichkeit der genauen Steuerung von Partikelgröße und –form ableitet. Bariumtitanat (BaTiO3) konnte durch solvothermale Reaktion von metallischem Barium und Titanisopropoxid in organischen Lösungsmitteln hergestellt werden. Hochkristalline, phasenreine Partikel von etwa 6 nm Durchmesser wurden in Benzylalkohol erhalten, während in Ketonen wie Aceton oder Acetophenon größere Partikel entstanden. In Benzylalkohol läuft ein neuartiger Reaktionsmechanismus ab, der eine C–C-Kupplungsreaktion zwischen dem Isopropoxid und dem benzylischen Kohlenstoffatom des Lösungsmittels umfasst. Das Kupplungsprodukt 4-Phenyl-2-butanol wird in praktisch stöchiometrischer Ausbeute erhalten. In Ketonen verläuft die Partikelbildung über eine titankatalysierte Aldolkondensation des Lösungsmittels, die formell die Eliminierung von Wasser einschließt, was zur Bildung des Oxids führt. Diese Prozesse liefen auch bei Umsetzung von reinem Titanisopropoxid in Ketonen oder Aldehyden ab, wobei hier hochkristalline Anatas-Nanopartikel entstanden. Auch die Synthese von Bleizirkonat-titanat-Nanopulvern war in Ketonen möglich; die zunächst amorphen Pulver konnten durch Kalzinierung bei relativ geringen Temperaturen in kristalline Nanopartikel überführt werden. Zusätzlich wurden Filme durch Auftragen einer Suspension der Pulver auf Siliziumwafer und anschließende Kalzinierung hergestellt.Die solvothermale Synthese kann allerdings auch ausgehend von Metallacetylacetonaten durchgeführt werden. Benzylamin erwies sich hier als ein sehr vielseitiges Lösungsmittel und ermöglichte die Synthese von nanokristallinem In2O3, Ga2O3, ZnO und Eisenoxid ausgehend von den jeweiligen Acetylacetonaten. Im Verlauf der Synthese wird der Acetylacetonatligand unter C–C-Bindungsspaltung solvolysiert. Die entstehenden Enolatliganden reagieren dann unter Ketimin- und Aldolkondensation analog der Solvothermalsynthese in Ketonen weiter. Der letzte Teil dieser Arbeit beschäftigt sich mit der Funktionalisierung der Partikel. Zunächst wurden TiO2-Partikel durch verschiedene organische Liganden „in situ“ funktionalisiert, wodurch Eigenschaften wie etwa die Dispergierbarkeit in unterschiedlichen Lösungsmitteln beeinflusst werden konnten. In einem zweiten Schritt wurden kurze Oligopeptidketten über eine Katecholbrücke an die Partikel geknüpft, um anspruchsvolle Selbstanordnungseigenschaften zu erzielen. KW - Nanopartikel KW - Oxidkeramik KW - Bariumtitanat KW - PZT KW - Reaktionsmechanismus KW - Funktionalisierung KW - Selbstorganisation KW - nichtwässrige Synthese KW - Solvothermalsynthese KW - C-C Bindungsknüpfung KW - Sol-Gel KW - nonaqueous synthesis KW - solvothermal synthesis KW - C-C bond formation KW - sol-gel Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5892 ER - TY - THES A1 - Nozari, Samira T1 - Towards understanding RAFT aqueous heterophase polymerization T1 - Zum Verständnis der wässrigen Heterophasenpolymerisation mit RAFT N2 - Reversible addition-fragmentation transfer (RAFT) was used as a controlling technique for studying the aqueous heterophase polymerization. The polymerization rates obtained by calorimetric investigation of ab initio emulsion polymerization of styrene revealed the strong influence of the type and combination of the RAFT agent and initiator on the polymerization rate and its profile. The studies in all-glass reactors on the evolution of the characteristic data such as average molecular weight, molecular weight distribution, and average particle size during the polymerization revealed the importance of the peculiarities of the heterophase system such as compartmentalization, swelling, and phase transfer. These results illustrated the important role of the water solubility of the initiator in determining the main loci of polymerization and the crucial role of the hydrophobicity of the RAFT agent for efficient transportation to the polymer particles. For an optimum control during ab-initio batch heterophase polymerization of styrene with RAFT, the RAFT agent must have certain hydrophilicity and the initiator must be water soluble in order to minimize reactions in the monomer phase. An analytical method was developed for the quantitative measurements of the sorption of the RAFT agents to the polymer particles based on the absorption of the visible light by the RAFT agent. Polymer nanoparticles, temperature, and stirring were employed to simulate the conditions of a typical aqueous heterophase polymerization system. The results confirmed the role of the hydrophilicity of the RAFT agent on the effectiveness of the control due to its fast transportation to the polymer particles during the initial period of polymerization after particle nucleation. As the presence of the polymer particles were essential for the transportation of the RAFT agents into the polymer dispersion, it was concluded that in an ab initio emulsion polymerization the transport of the hydrophobic RAFT agent only takes place after the nucleation and formation of the polymer particles. While the polymerization proceeds and the particles grow the rate of the transportation of the RAFT agent increases with conversion until the free monomer phase disappears. The degradation of the RAFT agent by addition of KPS initiator revealed unambigueous evidence on the mechanism of entry in heterophase polymerization. These results showed that even extremely hydrophilic primary radicals, such as sulfate ion radical stemming from the KPS initiator, can enter the polymer particles without necessarily having propagated and reached a certain chain length. Moreover, these results recommend the employment of azo-initiators instead of persulfates for the application in seeded heterophase polymerization with RAFT agents. The significant slower rate of transportation of the RAFT agent to the polymer particles when its solvent (styrene) was replaced with a more hydrophilic monomer (methyl methacrylate) lead to the conclusion that a complicated cooperative and competitive interplay of solubility parameters and interaction parameter with the particles exist, determining an effective transportation of the organic molecules to the polymer particles through the aqueous phase. The choice of proper solutions of even the most hydrophobic organic molecules can provide the opportunity of their sorption into the polymer particles. Examples to support this idea were given by loading the extremely stiff fluorescent molecule, pentacene, and very hydrophobic dye, Sudan IV, into the polymer particles. Finally, the first application of RAFT at room temperature heterophase polymerization is reported. The results show that the RAFT process is effective at ambient temperature; however, the rate of fragmentation is significantly slower. The elevation of the reaction temperature in the presence of the RAFT agent resulted in faster polymerization and higher molar mass, suggesting that the fragmentation rate coefficient and its dependence on the temperature is responsible for the observed retardation. N2 - Um neue Materialien mit außergewöhnlichen Eigenschaften zu erstellen, muss man in der Lage sein, die Struktur der Moleküle zu kontrollieren, aus denen die Materialien bestehen. Für das Maßschneidern solcher neuer Eigenschaften besitzen Polymere ein großes Potenzial: Dies sind sehr lange Moleküle, die aus einer großen Zahl von kleineren Einheiten aufgebaut sind. Proteine und DNS sind Beispiele für natürliche Polymere; Plastik und Gummi sind Beispiele für künstliche Polymere. Letztere werden üblicherweise durch das Zusammenfügen einer Reihe von kleineren Molekülen, den Monomeren, hergestellt. Schon lange versuchen Wissenschaftler, die Anordnung, Anzahl und Art dieser Monomere zu kontrollieren, die sich in der Struktur der Polymermoleküle widerspiegeln. Die gebräuchlichste Methode zur kommerziellen Produktion von Polymeren ist die so genannte freie radikalische Polymerisation. Die Strukturkontrolle durch diese Methode ist jedoch relativ schwierig und wurde maßgeblich erst im letzten Jahrzehnt entwickelt. Trotz der Existenz einiger effektiver Kontrollmethoden ist ihre industrielle Anwendung bislang sehr beschränkt, weil sie nicht für die Emulsionspolymerisation verwendbar sind. Die Emulsionspolymerisation ist die gängigste Technik in der industriellen Produktion von Polymeren. Es handelt sich dabei um ein vergleichsweise umweltfreundliches Verfahren, denn es werden keine organischen Lösungsmittel verwendet. Stattdessen dient Wasser als Lösungsmittel, in dem die Polymere in Form von kleinen, fein verteilten Partikeln vorliegen. In der Natur kommt dieses Prinzip beispielsweise in Pflanzen bei der Bildung von Kautschuk - allgemein als Latex bezeichnet - vor. Schließlich ist die Emulsionspolymerisation einfach durchzuführen: Das Produkt ist in vielen Fällen gebrauchsfertig, und es gibt viele technische Vorteile im Vergleich zu anderen Herstellungsprozessen. Doch bevor die Probleme beim Einsatz von Kontrollmethoden in der Emulsionspolymerisation gelöst werden können, müssen erst ihre Ursachen geklärt werden. Dies ist eine unverzichtbare Vorraussetzung zum Übertragen von Forschungsergebnissen auf das tägliche Leben. Ziel dieser Arbeit ist die Untersuchung der Probleme, die für die kontrollierte radikalische Polymerisation in Emulsion von Bedeutung sind. Die wichtigste Fragestellung in der Emulsionspolymerisation zielt auf die Löslichkeit der Reaktionskomponenten in den verschiedenen Phasen, wie z.B. in Wasser oder in den Polymerpartikeln. Die Kontrollmethode der Wahl für diese Arbeit ist "Reversibler Additions-Fragmentierungs Transfer" (RAFT). Die RAFT-Methode ist die modernste Kontrollmethode, und sie ist für viele Reaktionsbedingungen und viele Arten von Monomeren anwendbar. T2 - Towards understanding RAFT aqueous heterophase polymerization KW - Heterophasenpolymerisation KW - Emulsion KW - RAFT KW - kontrollierte radikalische Polymerisation KW - RAFT KW - controlled radical polymerization Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5801 ER - TY - THES A1 - Maltseva, Elena T1 - Model membrane interactions with ions and peptides at the air/water interface T1 - Wechselwirkungen von Modellmembranen mit Ionen und Peptiden - studiert an der Luft-Wasser-Grenzfläche N2 - The interactions between peptides and lipids are of fundamental importance in the functioning of numerous membrane-mediated biochemical processes including antimicrobial peptide action, hormone-receptor interactions, drug bioavailability across the blood-brain barrier and viral fusion processes. Alteration of peptide structure could be a cause of many diseases. Biological membranes are complex systems, therefore simplified models may be introduced in order to understand processes occurring in nature. The lipid monolayers at the air/water interface are suitable model systems to mimic biological membranes since many parameters can be easily controlled. In the present work the lipid monolayers were used as a model membrane and their interactions with two different peptides B18 and Amyloid beta (1-40) peptide were investigated. B18 is a synthetic peptide that binds to lipid membranes that leads to the membrane fusion. It was demonstrated that it adopts different structures in the aqueous solutions and in the membrane interior. It is unstructured in solutions and forms alpha-helix at the air/water interface or in the membrane bound state. The peptide has affinity to the negatively charged lipids and even can fold into beta-sheet structure in the vicinity of charged membranes at high peptide to lipid ratio. It was elucidated that in the absence of electrostatic interactions B18 does not influence on the lipid structure, whereas it provides partial liquidization of the negatively charged lipids. The understanding of mechanism of the peptide action in model system may help to develop the new type of antimicrobial peptides as well as it can shed light on the general mechanisms of peptide/membrane binding. The other studied peptide - Amyloid beta (1-40) peptide, which is the major component of amyloid plaques found in the brain of patients with Alzheimer's disease. Normally the peptide is soluble and is not toxic. During aging or as a result of the disease it aggregates and shows a pronounced neurotoxicity. The peptide aggregation involves the conformational transition from a random coil or alpha-helix to beta-sheets. Recently it was demonstrated that the membrane can play a crucial role for the peptide aggregation and even more the peptide can cause the change in the cell membranes that leads to a neuron death. In the present studies the structure of the membrane bound Amyloid beta peptide was elucidated. It was found that the peptide adopts the beta-sheet structure at the air/water interface or being adsorbed on lipid monolayers, while it can form alpha-helical structure in the presence of the negatively charged vesicles. The difference between the monolayer system and the bulk system with vesicles is the peptide to lipid ratio. The peptide adopts the helical structure at low peptide to lipid ratio and folds into beta-sheet at high ratio. Apparently, Abeta peptide accumulation in the brain is concentration driven. Increasing concentration leads to a change in the lipid to peptide ratio that induces the beta-sheet formation. The negatively charged lipids can act as seeds in the plaque formation, the peptide accumulates on the membrane and when the peptide to lipid ratio increases it the peptide forms toxic beta-sheet containing aggregates. N2 - Wechselwirkungen zwischen Peptiden und Lipiden sind von grundlegender Bedeutung für die Funktion vieler Membran-vermittelter biochemischer Prozesse wie der Wirkung von antimikrobiellen Peptiden, Hormon-Rezeptor Wechselwirkungen, Bioverfügbarkeit von Arzneistoffen durch die Blut-Hirn-Schranke und viraler Fusionsprozesse. Veränderungen in der Peptidstruktur können die Ursache für viele Erkrankungen sein. Biologische Membranen sind für grundlegende physikalisch-chemische Untersuchungen von Naturprozessen zu komplexe Systeme, so dass vereinfachte Modelle für solche Studien eingesetzt werden. Eine Lipidmonoschicht an der Wasser/Luft Grenzfläche ist ein geeignetes Modellsystem für eine Membranoberfläche. Viele physikalisch-chemischen Parameter können auf einfache Weise gezielt verändert werden. In der vorliegenden Arbeit wurden Lipidmonoschichten genutzt, um Wechselwirkungen mit zwei unterschiedlichen Peptiden (B18 and Amyloid Beta (1-40) Peptid) zu untersuchen. B18 ist ein oberflächenaktives synthetisches Peptid, das an Lipidmembranen bindet und zu Membranfusion führt. Es kann verschiedene Sekundärstrukturen ausbilden. So ist B18 in wässrigen Lösungen ungeordnet und bildet eine alpha-helikale Struktur an der Wasser/Luft Grenzfläche. Das Peptid hat eine große Affinität zu negativ geladenen Lipiden und kann in der Nähe von geladenen Membranoberflächen bei einem großen Peptid/Lipid Verhältnis eine Beta-Faltblatt Struktur ausbilden. Beim Fehlen elektrostatischer Wechselwirkungen hat B18 keinen Einfluss auf die Lipidstruktur. Es wirkt jedoch strukturabbauend auf anionische Lipide. Das Verständnis der Peptidwirkungen in Modellsystemen kann helfen, generelle Mechanismen von Peptide-Membran Wechselwirkungen zu verstehen und zur Entwicklung neuer antimikrobieller Peptide beizutragen. Amyloid Beta (1-40) Peptid ist die Hauptkomponente von Amyloid-Plaque, das im Gehirn von Alzheimer Patienten gefunden wird. Normalerweise ist das Peptid löslich und nicht toxisch. Hohe Neurotoxizität wird bei Peptidaggregation, die eine Strukturumwandlung von ungeordnet oder alpha-helikal zu Beta-Faltblatt nach sich zieht, beobachtet. In der vorliegenden Arbeit wurde die Struktur des Membran-gebundenen Amyloid Beta (1-40) Peptids untersucht. Es zeigte sich, dass das Peptid nach Adsorption an die Wasser/Luft Grenzfläche oder an Lipidmonoschichten eine Beta-Faltblatt Struktur ausbildet. Eine alpha-helikale Sekundärstruktur wird nur bei Anwesenheit negativ geladenen Lipidvesikel gefunden. Der entscheidende Unterschied zwischen den Monoschicht- und Vesikel-Systemen ist das Peptid/Lipid Verhältnis. Die alpha-helikale Struktur wird nur bei kleinem Peptid/Lipid Verhältnis beobachtet, während bei großem eine Beta-Faltblatt Struktur auftritt. Steigende Konzentration an Amyloid Beta (1-40) Peptid führt zum Anstieg des Peptid/Lipid Verhältnisses und damit zur Ausbildung der Beta-Faltblatt Struktur. Negativ geladene Lipide können somit als Keimpunkte für die Plaquebildung fungieren. KW - Lipide KW - Monoschicht KW - Peptide KW - Phospholipid KW - Langmuir monolayers KW - IRRAS KW - Amyloid peptide Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5670 ER - TY - THES A1 - Voß, Rebecca T1 - Mesoporous organosilica materials with amine functions : surface characteristics and chirality T1 - Mesoporöse Amin-funktionalisierte Organo-Silik ate : Oberflächen Eigenschaften und Chiralität N2 - In this work mesoporous organisilica materials are synthesized through the silica sol-gel process. For this a new class of precursors which are also surfactant are synthesized and self-assembled. This leads to a high surface area functionality which is analysized with copper (II) and water adsorption. N2 - Im Rahmen dieser Arbeit werden mesoporöse Amin-funktionalisierte Organo-Silikate durch den Silika Sol-Gel Prozess hergestellt. Dabei werden neue Alkoxysilyl-Precursoren synthetisiert und condensiert die die gewünschte Funktion auf die Oberfläche dirigieren. Herstellt werden primäre, secundäre und chirale Amine. Die Oberflächenfunktionalität wird mit Kupfer (II) und Wasser Adsorption analysiert. T2 - Mesoporous organosilica materials with amine functions : surface characteristics and chirality KW - Silicate KW - Chiralität KW - Adsorption KW - Poröser Stoff KW - Hydroborierung KW - Amine KW - Mesoporöse Materialien KW - Organo-Silikate KW - mesoporous materials KW - organosilica Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5287 ER - TY - THES A1 - Mertoglu, Murat T1 - The synthesis of well-defined functional homo- and block copolymers in aqueous media via Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization T1 - - N2 - New chain transfer agents based on dithiobenzoate and trithiocarbonate for free radical polymerization via Reversible Addition-Fragmentation chain Transfer (RAFT) were synthesized. The new compounds bear permanently hydrophilic sulfonate moieties which provide solubility in water independent of the pH. One of them bears a fluorophore, enabling unsymmetrical double end group labelling as well as the preparation of fluorescent labeled polymers. Their stability against hydrolysis in water was studied, and compared with the most frequently employed water-soluble RAFT agent 4-cyano-4-thiobenzoylsulfanylpentanoic acid dithiobenzoate, using UV-Vis and 1H-NMR spectroscopy. An improved resistance to hydrolysis was found for the new RAFT agents, providing good stabilities in the pH range between 1 and 8, and up to temperatures of 70°C. Subsequently, a series of non-ionic, anionic and cationic water-soluble monomers were polymerized via RAFT in water. In these experiments, polymerizations were conducted either at 48°C or 55°C, that are lower than the conventionally employed temperatures (>60°C) for RAFT in organic solvents, in order to minimize hydrolysis of the active chain ends (e.g. dithioester and trithiocarbonate), and thus to obtain good control over the polymerization. Under these conditions, controlled polymerization in aqueous solution was possible with styrenic, acrylic and methacrylic monomers: molar masses increase with conversion, polydispersities are low, and the degree of end group functionalization is high. But polymerizations of methacrylamides were slow at temperatures below 60°C, and showed only moderate control. The RAFT process in water was also proved to be a powerful method to synthesize di- and triblock copolymers including the preparation of functional polymers with complex structure, such as amphiphilic and stimuli-sensitive block copolymers. These include polymers containing one or even two stimuli-sensitive hydrophilic blocks. The hydrophilic character of a single or of several blocks was switched by changing the pH, the temperature or the salt content, to demonstrate the variability of the molecular designs suited for stimuli-sensitive polymeric amphiphiles, and to exemplify the concept of multiple-sensitive systems. Furthermore, stable colloidal block ionomer complexes were prepared by mixing anionic surfactants in aqueous media with a double hydrophilic block copolymer synthesized via RAFT in water. The block copolymer is composed of a noncharged hydrophilic block based on polyethyleneglycol and a cationic block. The complexes prepared with perfluoro decanoate were found so stable that they even withstand dialysis; notably they do not denaturate proteins. So, they are potentially useful for biomedical applications in vivo. N2 - Ziel der vorliegenden Arbeit war es, neue Kettenübertragungs Agenzien, basierend auf Dithiobenzoat- und Trithiocarbonatderivaten zu synthetisieren, welche in der "Reversiblen Additions-Fragmentierungs Kettenübertragungs-Polymerisation" (RAFT) eingesetzt werden können. Die neu synthetisierten Verbindungen zeichnen sich durch permanent hydrophile Sulfonatgruppen aus, welche eine pH-unabhängige Löslichkeit in Wasser ermöglichen. Eine dieser Verbindungen trägt ein Fluorophore, wodurch eine asymmetrische doppelte Endgruppenmarkierung sowie die Herstellung von Fluoreszenzmarkierten Polymeren möglich ist. Die Hydrolysestabilität dieser Verbindungen in wässriger Lösung im Vergleich mit dem z. Zeit bekanntesten wasserlöslichen RAFT Agenz (4-Cyano-4-thiobenzoylsulfanylpentansäuredithiobenzoate) wurde unter Anwendung spektroskopischer Methoden (UV-Vis, 1H-NMR) untersucht. Dabei wurde festgestellt, dass diese neue Verbindungen deutlich bessere Hydrolysestabiltäten im pH-Bereich von 1-8 und bis zu einer Temperatur von 70°C besitzen. Die neuen RAFT-Verbindungen wurden ebenfalls bezgl. Ihrer Eignung in der Polymerisation von wasserlöslichen nichtionischen, anionischen und kationischen Monomeren in wässrigem Medium bei 48°C und 55°C getestet. Unter diesen Bedingungen konnten Vinylverbindungen wie z. B. Styrenderivate. Acrylate und Methacrylate kontrolliert polymerisiert werden: Die Molmasse stieg mit dem Umsatz, die Polydispersitäten waren niedrig und die isolierten Polymere zeigten Grad an Endgruppenfunktionalität. Bei der Polymerisation von Methacrylamiden wurde bei Polymerisationstemperaturen unter 60°C nur eine mäßige Kontrolle gefunden. Es konnte weiterhin die RAFT Polymerisation in Wasser als leistungsstarke Methode zur Herstellung definierter Di- und Triblockcopolymere, einschließlich der Synthese von funktionalen Polymeren mit komplexer Struktur – beispielsweise amphiphiler- und schaltbare (stimuli responsive) Blockcopolymere entwickelt werden. Dies beinhaltet auch Polymere, die einen oder zwei schaltbare hydrophile Polymerblöcke enthalten. Der hydrophile Eigenschaft eines oder mehrer Blöcke kann durch äußere Reize wie pH-Änderung, Temperatur oder Salzgehalt geändert werden. Diese Beispiele demonstrierten die Variabilität des für schaltbare Polyamphiphile notwendigen Designs und zeigten exemplarisch das Konzept für multi-sensitive Systeme. KW - RAFT KW - wasser KW - blockcopolymere KW - stimuli-sensitive KW - RAFT KW - water KW - blockcopolymer KW - stimuli-sensitive Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-2338 ER - TY - THES A1 - Rusu, Viorel Marin T1 - Composite materials made of chitosan and nanosized apatite : preparation and physicochemical characterization T1 - - N2 - Taking inspiration from nature, where composite materials made of a polymer matrix and inorganic fillers are often found, e.g. bone, shell of crustaceans, shell of eggs, etc., the feasibility on making composite materials containing chitosan and nanosized hydroxyapatite were investigated. A new preparation approach based on a co-precipitation method has been developed. In its earlier stage of formation, the composite occurs as hydrogel as suspended in aqueous alkaline solution. In order to get solid composites various drying procedures including freeze-drying technique, air-drying at room temperature and at moderate temperatures, between 50oC and 100oC were used. Physicochemical studies showed that the composites exhibit different properties with respect to their structure and composition. IR and Raman spectroscopy probed the presence of both chitosan and hydroxyapatite in the composites. Hydroxyapatite as dispersed in the chitosan matrix was found to be in the nanosize range (15-50 nm) and occurs in a bimodal distribution with respect to its crystallite length. Two types of distribution domains of hydroxyapatite crystallites in the composite matrix such as cluster-like (200-400 nm) and scattered-like domains were identified by the transmission electron microscopy (TEM), X-ray diffraction (XRD) and by confocal scanning laser microscopy (CSLM) measurements. Relaxation NMR experiments on composite hydrogels showed the presence of two types of water sites in their gel networks, such as free and bound water. Mechanical tests showed that the mechanical properties of composites are one order of magnitude less than those of compact bone but comparable to those of porous bone. The enzymatic degradation rates of composites showed slow degradation processes. The yields of degradation were estimated to be less than 10% by loss of mass, after incubation with lysozyme, for a period of 50 days. Since the composite materials were found biocompatible by the in vivo tests, the simple mode of their fabrication and their properties recommend them as potential candidates for the non-load bearing bone substitute materials. N2 - Inspiriert von Natur, bei der Kompositmaterialien aus Polymermatrices und anorganischen Füllstoffen z.B. in Knochen, Krustentieren und Eierschalen vorzufinden sind, wurde die Herstellungsmöglichkeit von Kompositmaterial aus Chitosan und Hydroxyapatitdispersionen untersucht. Basierend auf einem Kopräzipitationsverfahren wurde eine neue Herstellungsmethode entwickelt, die als flexibler Zugang zu einem Spektrum von Komposittypen führt. In den frühen Phasen der Kompositbildung entsteht ein in der wässrigen alkalischen Lösung suspendiertes Hydrogel, das durch Filtration und Zentrifugation isoliert werden kann. IR und Ramanspektroskopie klären das Vorhandensein von Chitosan und Hydroxyapatit im Kompositmaterial. Hydroxyapatit ist als Nanopartikel der Größe von 15-50 nm in bimodaler Verteilung in der Chitosanmatrix dispersiert, und in durch Transmissionselektronenmikroskopie (TEM), X-Ray Diffraction (XRD) und Konfokaler Laserscanmikroskopie (CSLM) nachweisbaren 200-400 nm großen Clustern assembliert. NMR-Relaxationsmessungen an Hydrogelkompositmaterial decken die Existenz zweier Klassen vorkommenden Wassers im Netzwerk auf, gebundenes und freies Wasser. Mechanische Tests zeigen, dass die mechanische Festigkeit etwa eine Größenordnung unter der von massivem Knochen liegt, der Festigkeit von porösem Knochen aber gleichkommt. Enzymatische Abbauraten des Kompostimaterials sind als langsam einzuschätzen. Eine 50-tägige Einwirkzeit von Lysozym führte zu einem Abbau von 10 % der Kompositmasse. Die sich durch in vivo Tests herausstellende Biokompatibilität, die einfachen Herstellungsmöglichkeiten und die physikochemischen Eigenschaften empfehlen dieses Material als vielversprechenden Kandidaten für Knochenersatzmaterial in mäßig belasteten Bereichen. KW - Chitosan KW - Hydroxyapatit KW - Nanopartikel KW - Kompositmaterial KW - Chitosan KW - hydroxyapatite KW - nanoparticles KW - composites Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-2316 ER - TY - THES A1 - Schlaad, Helmut T1 - Polymer self-assembly : adding complexity to mesostructures of diblock copolymers by specific interactions N2 - In dieser Arbeit wurde die Rolle selektiver, nicht-kovalenter Wechselwirkungen bei der Selbstorganisation von Diblockcopolymeren untersucht. Durch Einführung elektrostatischer, dipolarer Wechselwirkungen oder Wasserstoffbrückenbindungen sollte es gelingen, komplexe Mesostrukturen zu erzeugen und die Ordnung vom Nanometerbereich auf größere Längenskalen auszuweiten. Diese Arbeit ist im Rahmen von Biomimetik zu sehen, da sie Konzepte der synthetischen Polymer- und Kolloidchemie und Grundprinzipien der Strukturbildung in supramolekularen und biologischen Systemen verbindet. Folgende Copolymersysteme wurden untersucht: (i) Blockionomere, (ii) Blockcopolymere mit chelatisierenden Acetoacetoxyeinheiten und (iii) Polypeptid-Blockcopolymere. N2 - In this work, the basic principles of self-organization of diblock copolymers having the in¬herent property of selective or specific non-covalent binding were examined. By the introduction of electrostatic, dipole–dipole, or hydrogen bonding interactions, it was hoped to add complexity to the self-assembled mesostructures and to extend the level of ordering from the nanometer to a larger length scale. This work may be seen in the framework of biomimetics, as it combines features of synthetic polymer and colloid chemistry with basic concepts of structure formation applying in supramolecular and biological systems. The copolymer systems under study were (i) block ionomers, (ii) block copolymers with acetoacetoxy chelating units, and (iii) polypeptide block copolymers. T2 - Polymer self-assembly : adding complexity to mesostructures of diblock copolymers by specific interactions KW - block copolymer KW - polypeptide KW - controlled polymerization KW - self-assembly KW - specific interactions KW - micelle KW - vesicle KW - solid-state structure KW - colloids KW - Blockcopolymer KW - Polypeptid KW - kontrollierte Polymerisation KW - Selbstorganisation KW - spezifische Wechselwirkungen KW - Mizelle KW - Vesikel KW - Festkörperstruktur KW - Kol Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001824 ER - TY - THES A1 - Sinn, Cornelia G. T1 - Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen N2 - Ziel dieser Arbeit ist die Untersuchung der Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen. Im ersten Teil dieser Arbeit wurde der Einfluss verschiedener anorganischer Salze und Polyelektrolyte auf die Struktur des Wassers mit Hilfe Isothermer Mikrotitrationskalorimetrie (ITC) erforscht. Die Verdünnungswärme der Salze wurde als Maß für die Fähigkeit der Ionen, die geordnete Struktur des Wassers zu stabilisieren oder zu zerstören, verwendet. Die Verdünnungswärmen konnten auf Hofmeister Effekte zurückgeführt werden. Im Anschluss daran wurde die Bindung von Ca2+ an Natrium- Poly(acrylsäure) (NaPAA) untersucht. Mit Hilfe von ITC und einer Ca2+- selektiven Elektrode wurde die Reaktionsenthalpie und Bindungsisotherme gemessen. Es wurde gezeigt, dass die Binding von Ca2+ - Ionen an NaPAA stark endotherm und daher entropiegetrieben ist. Anschließend wurde die Bindung von Ca2+ an die eindimensionale Polymerkette mit der an ein Lipidvesikel mit denselben funktioniellen Gruppen verglichen. Es wurde beobachtet, dass die Ionenbindung –wie auch im Fall des Polymers- endotherm ist. Ein Vergleich der Ca2+- Bindung an die Lipidmembran mit der an das Polymer konnte zeigen, dass das Ion schwächer an die Membran bindet. Im Zusammenhang mit diesen Experimenten wurde auch beobachtet, dass Ca2+ nicht nur an geladene, sondern auch an zwitterionische Lipidvesikel bindet. Schließlich wurde die Wechselwirkung zweier Salze, KCl and NaCl, mit einem neutralen Polymergel, PNIPAAM, und dem geladenen Polymer PAA untersucht. Mit Hilfe von Kalorimetrie und einer kaliumselektiven Elektrode wurde beobachtet, dass die Ionen mit beiden Polymeren wechselwirken, unabhängig davon, ob diese Ladungen tragen, oder nicht. N2 - The goal of this work was to study the binding of ions to polymers and lipid bilayer membranes in aqueous solutions. In the first part of this work, the influence of various inorganic salts and polyelectrolytes on the structure of water was studied using Isothermal Titration Calorimetry (ITC). The heat of dilution of the salts was used as a scale of water structure making and breaking of the ions. The heats of dilution could be attributed to the Hofmeister Series. Following this, the binding of Ca2+ to poly(sodium acrylate) (NaPAA) was studied. ITC and a Ca2+ Ion Selective Electrode were used to measure the reaction enthalpy and binding isotherm. Binding of Ca2+ ions to PAA, was found to be highly endothermic and therefore solely driven by entropy. We then compared the binding of ions to the one-dimensional PAA polymer chain to the binding to lipid vesicles with the same functional groups. As for the polymer, Ca2+ binding was found to be endothermic. Binding of calcium to the lipid bilayer was found to be weaker than to the polymer. In the context of these experiments, it was shown that Ca2+ not only binds to charged but also to zwitterionic lipid vesicles. Finally, we studied the interaction of two salts, KCl and NaCl, to a neutral polymer gel, PNIPAAM, and to the ionic polymer PAA. Combining calorimetry and a potassium selective electrode we observed that the ions interact with both polymers, whether containing charges or not. T2 - Ion binding to polymers and lipid membranes in aqueous solutions : Ionenbindung an Polymeren und Lipidmembranen in wässrigen Lösungen KW - Ionen KW - Bindung KW - Salz KW - Wasser KW - Struktur KW - Hofmeister KW - Polyelektrolyt KW - Isotherme Titrationskalorimetrie KW - ionenselektive Elektrode KW - Vesikel KW - Calcium KW - Micr KW - ions KW - binding KW - salt KW - water KW - structure KW - Hofmeister KW - polyelectrolyte KW - Isothermal Titration Calorimetry KW - ion selective electrode KW - vesicle KW - calcium KW - micro Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001778 ER - TY - THES A1 - Appajaiah, Anilkumar T1 - Climatic stability of polymer optical fibers (POF) N2 - Optische Polymerfasern stellen ein relativ neues Medium zur Hochgeschwindigkeitsdatenübertragung mittels moduliertem Licht dar. Sie gestatten die Verbreitung großer Datenmengen über Entfernungen bis zu ca. 100 m, ohne eine Beeinflussung durch externe elektromagnetischen Feldern. Jedoch reagieren die Fasern und somit auch ihre optischen Eigenschaften aufgrund des organischchemischen Faseraufbaus empfindlich auf das Klima ihrer Umgebung. Die Ursachen für die Abnahme der optischen Transmission aufgrund von klimatischen Einflüssen (Alterung, Degradation) werden mittels chemisch analytischer Verfahren wie Chemilumineszenz (CL) und Fourier Transform Infrarot (FTIR) Spektroskopie untersucht. Dabei kommen fünf, von verschiedenen Herstellern bezogene, Multimode- POFs aus PMMA in sieben verschiedenen Klimaten zum Einsatz. Drei dieser fünf POFs werden genauer untersucht, um den Einfluss einzelner Parameter festzustellen und optische Langzeitstabilität aufgrund von Kurzzeittests vorherzusagen. Als erstes erfolgt eine Kennzeichnung unbeanspruchter POF Komponenten (Kern, Mantel und nackte POF als Kombination von Kern und Mantel) über ihre physikalischen und chemischen Eigenschaften. Die Glas- und die Schmelztemperaturen liegen im Bereich von 120 °C bis 140 °C, das Molekulargewicht des Kerns bei größenordnungsmäßig 105 g mol-1 ;. FTIR-Messungen zeigen zwar Unterschiede in der chemischen Zusammensetzung der Mäntel aber keine Unterschiede bei den Kernen. Bei zwei der POF Proben , die als Kabel (Kern, Mantel und Schutzhülle) für 3300 Stunden einem Klima aus 92 °C und 95 % relativer Feuchte (r.F.) ausgesetzt waren, verringern sich daraufhin die optische Transmissionen in unterschiedlicher Weise. Die Untersuchung der zugehörigen nackten POFs mittels CL, FTIR, Thermogravimetrie (TG), UV/VIS und Gel Permeation Chromatographie (GPC) lässt eine stärkere Schädigung der Mäntel als der Kerne vermuten. Wahrscheinlich führt eine starke Manteldegradation zu einer erhöhten Absorption und Fehlstellen im Mantel und damit zu einer Transmissionsabnahme. Daher scheint die optische Stabilität der POF stärker durch die thermo-oxidative Stabilität des Mantels bestimmt zu sein als durch die des Kernes. Drei nackte POFs (Kern und Mantel) sind unterschiedlich lang (30 Stunden bis 3000 Stunden) folgenden Klimaten ausgesetzt: 92 °C / 95 % r.F., 92 °C / 50 % r.F., 50 °C / 95 % r.F., 90 °C / geringe Feuchte, 100 °C / geringe Feuchte, 110 °C / geringe Feuchte and 120 °C / geringe Feuchte. Auch in diesen Klimaten ergaben sich probenbedingte unterschiedliche Transmissionsänderungen. Die Ergebnisse deuten stark darauf hin, dass bei gleichzeitig hoher Temperatur und hoher Feuchte physikalische Änderungen wie die Volumenausdehnung die Hauptursachen für die Abnahme der optischen Transmission bilden. Ein weiterer Einflussfaktor ist die chemische Zusammensetzung der Mäntel. Bei Kombination von hoher Temperatur und geringer Feuchte erzeugen in den Anfangsstadien der Alterung physikalische Änderungen Transmissionsabnahmen, vermutlich entstehen Fehlstellen in der Kern-Mantel-Grenzschicht. Hinzukommen in den späteren Stadien wahrscheinlich zunehmende Lichtabsorption in Kern und Mantel. L. Jankowski (Doktorand in der BAM) bestätigt diese Annahme durch parallel ausgeführte optische Simulationsrechnungen. Auch für nackte POFs scheint also die thermo-oxidative Stabilität die optische Stabilität zu bestimmen. Kurzzeitalterungstests sollen Aufschluss über den Einfluss individueller Klimaparameter auf die POF Eigenschaften geben. Es zeigt sich bei dauerhaft hoher Temperatur und variabler Feuchte aufgrund des physikalisch absorbierten Wassers bis zu einem gewissen Grad ein reversibles Verhalten des Transmissionsverlustes. Dieses Verhalten tritt aber nur kaum merkbar auf, wenn bei konstanter hoher Feuchte die Temperatur variiert wird. Bei Raumtemperatur und variabler Feuchte stellt sich jedoch ein voll reversibles Verhalten des Transmissionsverlustes ein. Die hier beschriebenen Untersuchungen sind als Ausgangspunkt für weitergehende Forschungen zu verstehen. Die begrenzte Zurverfügungstellung von POF Basisdaten durch die Hersteller und der zeitaufwendige klimabedingte Alterungsprozess beschränken die Ergebnisse mehr oder weniger auf die untersuchten Proben. Signifikante allgemeine Aussagen erfordern aber beispielsweise zusätzliche statistische Daten der Produktionsschwankungen von POF Eigenschaften. Dennoch besitzen die hier beschriebenen Tests das Potential für eine Annäherung an die optische Langzeitstabilität und deren Vorhersage. N2 - Polymer optical fibers (POFs) are a rather new tool for high-speed data transfer by modulated light. They allow the transport of high amounts of data over distances up to about 100 m without be influenced by external electromagnetic fields. Due to organic chemical nature of POFs, they are sensitive to the climate of their environment and therefore the optical fiber properties are as well. Hence, the optical stability is a key issue for long-term applications of POFs. The causes for a loss of optical transmission due to climatic exposures (aging/degradation) are researched by means of chemical analytical tools such as chemiluminescence (CL) and Fourier transform infrared (FTIR) spectroscopy for five different (with respect to manufacturers) step-index multimode PMMA based POFs and for seven different climatic conditions. Three of the five POF samples are studied more in detail to realize the effects of individual parameters and for forecasting longterm optical stability by short-term exposure tests. At first, the unexposed POF components (core, cladding, and bare POF as combination of core and cladding) are characterized with respect to important physical and chemical properties. The glass transition temperature Tg, and the melting temperature Tm are in the region of 120 °C to 140 °C, the molecular weight (Mw) of cores is in the order of 105 g mol-1. POFs are found to have different chemical compositions of their claddings as could be detected by FTIR, but identical compositions of their cores. Two of the POFs are exposed as cables (core, cladding and jacket) for about 3300 hours to the climate 92 °C / 95 % relative humidity (RH) resulting in a different transmission decrease. Investigating the related unexposed and exposed bare POFs for degradation using CL, FTIR, thermogravimetry (TG), UV/visible transmittance and gel permeation chromatography (GPC) suggest that claddings of POFs are more affected than cores. Probably the observed loss of transmission is mainly due to increased light absorption and imperfections at the core-cladding boundary caused by a large degradation of claddings. Hence, it is highly possible that the optical transmission stability of POFs is governed mainly by the thermo-oxidative stability of the cladding and minor of the core. Three bare POFs (core and cladding only) are exposed for different duration of exposure time (30 hours to 4500 hours) to 92 °C / 95 %RH, 92 °C / 50 %RH, 50 °C / 95 %RH, 90 °C / low humidity, 100 °C / low humidity, 110 °C / low humidity and 120 °C / low humidity. In these climates their transmission variations are found to be different from each other, too. The outcomes strongly inform that under high temperature and high humid climates physical changes such as volume expansion, are the main sources for the loss of optical transmission. Also, the optical transmission stability of POFs is found to be dependent on chemical compositions of claddings. Under high temperature and low humid conditions, a loss of transmission at the early stages of the exposure is mainly caused by physical changes, presumable by corecladding interface imperfections. For the later stages of exposures it is proposed to an additional increase of light absorption by core and cladding owes to degradation. Optical simulation results obtained parallel by Mr. L. Jankowski (a PhD student of BAM) are found to confirm these results. For bare POFs, too, the optical stability of POFs seems to depend on their thermo-oxidative stability. Some short-term exposure tests are conducted to realize influences of individual climatic parameters on the transmission property of POFs. It is found that at stationary high temperature and variable humidity conditions POFs display to a certain amount a reversible transmission loss due to physically absorbed water. But in the case of varying temperature and constant high humidity such reversibility is hardly noticeable. However, at room temperature and varying humidity, POFs display fully reversible transmission loss. The whole research described above has to be regarded as a starting point for further investigations. The restricted distribution of fundamental POF data by the manufacturers and the time consuming aging by climatic exposures restrict the results more or less to the samples, investigated here. Significant general statements require for example additional information concerning the variation of POF properties due to production. Nevertheless the tests, described here, have the capability for approximating and forecasting the long-term optical transmission stability of POFs. -------------- Auch im Druck erschienen: Appajaiah, Anilkumar: Climatic stability of polymer optical fibers (POF) / Anilkumar Appajaiah. - Bremerhaven : Wirtschaftsverl. NW, Verl. für neue Wiss., 2005. - Getr. Zählung [ca. 175 S.]. : Ill., graph. Darst. - (BAM-Dissertationsreihe ; 9) ISBN 3-86509-302-7 T2 - Climatic stability of polymer optical fibers (POF) KW - POF; Reliabilität; Abbau; Chemilumineszenz KW - POF; reliability; degradation; chemiluminescence Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001661 ER - TY - THES A1 - Ramírez Ríos, Liliana Patricia T1 - Superpara- and paramagnetic polymer colloids by miniemulsion processes N2 - Polymerverkapselte magnetische Nanopartikel versprechen, in der Zukunft sehr erfolgreich bei Anwendungen in der Biologie und der Medizin eingesetzt werden zu können z. B. in der Krebstherapie und als Kontrastmittel bei der magnetischen Kernspinresonanztomographie. Diese Arbeit zeigt, dass durch die interdisziplinäre Kombination verschiedener Techniken Herstellungsverfahren und Eigenschaften solcher Partikel verbessert werden können. Unter Miniemulsionen versteht man wässrige Dispersionen relativ stabiler Öltröpfchen, zwischen 30 und 50 nm Größe. Ein Nanometer (nm) ist der 1.000.000.000ste Teil eines Meters. Ein Haar ist ungefähr 60.000 Nanometer breit. Hergestellt werden Miniemulsionen durch Scherung eines Systems bestehend aus Öl, Wasser, Tensid (Seife) und einer weiteren Komponente, dem Hydrophob, das die Tröpfchen stabilisieren soll. Die Polymerisation von Miniemulsionen ermöglicht die Verkapselung anorganischer Materialen z. B. magnetischer Teilchen oder Gadolinium-haltiger Komponenten. Zu Optimierung des Verkapselung, ist es notwendig, die richtige Menge eines geeigneten Tensids zu finden. Die magnetischen polymerverkapselten Nanopartikel, die in einer wässrigen Trägerflüssigkeit dispergiert sind, zeigen in Abhängigkeit von Partikelgröße, Zusammensetzung, elektronischer Beschaffenheit, etc. ein sogenanntes superpara- oder paramagnetisches Verhalten. Superpara- oder paramagnetisches Verhalten bedeutet, dass die Flüssigkeiten in Anwesenheit äußerer Magnetfeldern ihre Fließfähigkeit beibehalten. Wenn das Magnetfeld entfernt wird, haben sie keine Erinnerung mehr daran, unter dem Einfluss eines Magnetfeldes gestanden zu haben, d. h., dass sie nach Abschalten des Magnetfeldes selbst nicht mehr magnetisch sind. Die Vorteile des Miniemulsionsverfahrens sind der hohe Gehalt und die homogene Verteilung magnetischer Teilchen in den einzelnen Nanopartikeln. Außerdem ermöglicht dieses Verfahren nanostrukturierte Kompositpartikel herzustellen, wie z. B polymerverkapselte Nanopartikel mit Nanoschichten bestehend aus magnetischen Molekülen. N2 - Combining the magnetic properties of a given material with the tremendous advantages of colloids can exponentially increase the advantages of both systems. This thesis deals with the field of magnetic nanotechnology. Thus, the design and characterization of new magnetic colloids with fascinating properties compared with the bulk materials is presented. Ferrofluids are referred to either as water or organic stable dispersions of superparamagnetic nanoparticles which respond to the application of an external magnetic field but lose their magnetization in the absence of a magnetic field. In the first part of this thesis, a three-step synthesis for the fabrication of a novel water-based ferrofluid is presented. The encapsulation of high amounts of magnetite into polystyrene particles can efficiently be achieved by a new process including two miniemulsion processes. The ferrofluids consist of novel magnetite polystyrene nanoparticles dispersed in water which are obtained by three-step process including coprecipitation of magnetite, its hydrophobization and further surfactant coating to enable the redispersion in water and the posterior encapsulation into polystyrene by miniemulsion polymerization. It is a desire to take advantage of a potential thermodynamic control for the design of nanoparticles, and the concept of "nanoreactors" where the essential ingredients for the formation of the nanoparticles are already in the beginning. The formulation and application of polymer particles and hybrid particles composed of polymeric and magnetic material is of high interest for biomedical applications. Ferrofluids can for instance be used in medicine for cancer therapy and magnetic resonance imaging. Superparamagnetic or paramagnetic colloids containing iron or gadolinium are also used as magnetic resonance imaging contrast agent, for example as a important tool in the diagnosis of cancer, since they enhance the relaxation of the water of the neighbouring zones. New nanostructured composites by the thermal decomposition of iron pentacarbonyl in the monomer phase and thereafter the formation of paramagnetic nanocomposites by miniemulsion polymerization are discussed in the second part of this thesis. In order to obtain the confined paramagnetic nanocomposites a two-step process was used. In the first step, the thermal decomposition of the iron pentacarbonyl was obtained in the monomer phase using oleic acid as stabilizer. In the second step, this iron-containing monomer dispersion was used for making a miniemulsion polymerization thereof. The addition of lanthanide complexes to ester-containing monomers such as butyl acrylate and subsequent polymerization leading to the spontaneous formation of highly organized layered nanocomposites is presented in the final part of this thesis. By an one-step miniemulsion process, the formation of a lamellar structure within the polymer nanoparticles is achieved. The magnetization and the NMR relaxation measurements have shown these new layered nanocomposites to be very apt for application as contrast agent in magnetic resonance imaging. T2 - Superpara- and paramagnetic polymer colloids by miniemulsion processes KW - Magnetisch KW - superparamagnetisch KW - paramagnetisch KW - Kolloid KW - Miniemulsion KW - Polymerisation KW - Ferrofluid KW - Überstrukturierte Komposite KW - Gadolinium KW - Lanthano KW - Magnetic KW - superparamagnetic KW - paramagnetic KW - colloid KW - miniemulsion KW - polymerization KW - ferrofluid KW - nanostructured composite KW - gadolinium KW - lanthanide Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001267 ER - TY - THES A1 - Tzoneva-Velinova, Rumiana T1 - The wettability of biomaterials determines the protein adsorption and the cellular responses N2 - During the past several decades polymer materials become widely used as components of medical devices and implants such as hemodialysers, bioartificial organs as well as vascular and recombinant surgery. Most of the devices cannot avoid the blood contact in their use. When the polymer materials come in contact with blood they can cause different undesired host responses like thrombosis, inflammatory reactions and infections. Thus the materials must be hemocompatible in order to minimize these undesired body responses. The earliest and one of the main problems in the use of blood-contacting biomaterials is the surface induced thrombosis. The sequence of the thrombus formation on the artificial surfaces has been well established. The first event, which occurs, after exposure of biomaterials to blood, is the adsorption of blood proteins. Surface physicochemical properties of the materials as wettability greatly influence the amount and conformational changes of adsorbed proteins. In turn the type, amount and conformational state of the adsorbed protein layer determines whether platelets will adhere and become activated or not on the artificial surface and thus to complete the thrombus formation. The adsorption of fibrinogen (FNG), which is present in plasma, has been shown to be closely related to surface induced thrombosis by participating in all processes of the thrombus formation such as fibrin formation, platelet adhesion and aggregation. Therefore study the FNG adsorption to artificial surfaces could contribute to better understanding of the mechanisms of platelet adhesion and activation and thus to controlling the surface induced thrombosis. Endothelization of the polymer surfaces is one of the strategies for improving the materials hemocompatibility, which is believed to be the most ideal solution for making truly blood-compatible materials. Since at physiological conditions proteins such as FNG and fibronectin (FN) are the usual extracellular matrix (ECM) for endothelial cells (EC) adhesion, precoating of the materials with these proteins has been shown to improve EC adhesion and growth in vitro. ECM proteins play an essential role not only like a structural support for cell adhesion and spreading, but also they are important factor in transmitting signals for different cell functions. The ability of cells to remodel plasma proteins such as FNG and FN in matrix-like structures together with the classical cell parameters such as actin cytoskeleton and focal adhesion formation could be used as an criteria for proper cell functioning. The establishment and the maintaining of delicate balance between cell-cell and cell-substrate contacts is another important factor for better EC colonization of the implants. The functionality of newly established endothelium in order to produce antithromotic substances should be always considered when EC seeding is used for improving the hemocompatibility of the polymer materials. Controlling the polymer surface properties such as surface wettability represents a versatile approach to manipulate the above cellular responses and therefore can be used in biomaterial and tissue engineering applications for producing better hemocompatible materials. KW - wettability KW - hemocompatibility KW - extracellular matrix proteins KW - endothelization Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001103 ER - TY - THES A1 - Deshpande, Atul Suresh T1 - Fabrication of porous metal oxides for catalytic application using templating techniques T1 - Herstellung poröser Metalloxide für katalytische Anwendungen unter Verwendung von Templatierungsverfahren N2 - Nanostrukturierte Materialien zeichnen sich dadurch aus, dass sie aus sehr kleinen Baueinheiten zusammengesetzt sind. Typischerweise liegt die Grössenordnung dieser Bausteine im Bereich von einigen Nanometern. Ein Nanometer entspricht 10-9 Meter. Dadurch bekommen nanostrukturierte Materialien oft verbesserte, vielfach sogar ganz neue Eigenschaften, die für viele heutige wie auch zukünftige Anwendungen von Vorteil sind. Ein Weg, um solche nanostrukturierte Materialien herzustellen, ist die sogenannte „Templatierungsmethode“. Das Templat besteht aus einem einzelnen Molekül, einer Ansammlung von Molekülen oder aus einem festen Objekt. Beim Aufbau des nanostrukturierten Materials wirkt das Templat als Schablone oder als Gussform und beeinflusst damit die Struktur des Endproduktes. Normalerweise besteht dieser Prozess aus mehreren Schritten. Zuerst wird der Raum um das Templat mit dem Ausgangsstoff umhüllt oder ausgefüllt, dann wird der Ausgangsstoff chemisch in das gewünschte Endprodukt umgewandelt, wobei das Templat die Endform kontrolliert und am Schluss wird das Templat entfernt. Das geschieht meistens durch Erhitzen. Als Ausgangsstoff können dabei einzelne Moleküle verwendet werden, die sich leicht in das Endprodukt umwandeln lassen, oder aber vorgeformte Partikelchen, die nur noch zur entsprechenden Form angeordnet werden müssen. In dieser Arbeit wurden poröse Metalloxid-Kügelchen hergestellt, die aus einem Gemisch aus Titanoxid und entweder Aluminium-, Gallium- oder Indiumoxid bestehen. Als Template wurden poröse Kunststoffkügelchen eingesetzt, die man sonst für Chromatographiezwecke braucht. Bei der Synthese wurden die Poren der Kunststoffkügelchen mit dem Ausgangsmaterial gefüllt und mit Wasser in ein amorphes Netzwerk umgewandelt. Danach werden die Kügelchen erhitzt, wobei das Kunststofftemplat zersetzt wird. Gleichzeitig wird das amorphe Gerüst in stabile, kristalline Wände umgewandelt, die die Form der Kügelchen auch dann noch behalten, wenn das Templat verschwunden ist. Mit einem ähnlichen Prozess wurden auch Kügelchen aus Cer-Zirkonoxid erhalten. Als Ausgangsstoff wurden dabei aber vorgeformte Cer-Zirkonoxid-Nanopartikel eingesetzt, die in die Poren der Kunststofftemplatkügelchen hinein diffundieren. Diese Cer-Zirkonoxid-Nanopartikel lassen sich auch für die Herstellung von porösen Pulvern verwenden, wobei dann nicht Polymerkügelchen, sondern hochgeordnete Ansammlungen von Block Copolymeren als Template verwendet werden. Form, Struktur und Eigenschaften all dieser Materialien wurden systematisch unter Anwendung verschiedenster Analysemethoden untersucht. Die auf Titanoxid-basierten Kügelchen wurden auch auf ihre photokatalytische Verwendung zum Abbau von umweltschädlichem 2-Chlorophenol untersucht. Die Cer-Zirkonoxid-Kügelchen wurden für die Herstellung von Wasserstoff aus Methanol getestet. Wasserstoff gilt als hoffungsvoller, sauberer Energieträger der Zukunft und kommt in Brennstoffzellen zum Einsatz. N2 - Nanostructured materials are the materials having structural features on the scale of nanometers i.e. 10-9 m. the structural features can enhance the natural properties of the materials or induce additional properties, which are useful for day to technology as well as the future technologies One way to synthesize nanostructured materials is using templating techniques. The templating process involves use of a certain “mould” or “scaffold” to generate the structure. The mould is called as the template, can be a single molecule or assembly of molecule or a larger object, which has its own structure. The product material can be obtained by filling the space around the template with a “precursor”, transformation of precursor into the desired material and then removal of template to get product. The precursor can be any chemical moiety that can be easily transformed in to the desired material. Alternatively the desired material is processed into very tiny bricks or “nano building blocks (NBB)” and the product is obtained by arrangement of the NBB by using a scaffold. We synthesized porous metal oxide spheres of namely TiO2-M2O3: titanium dioxide- M-oxide (M = aluminum, gallium and indium) TiO2-M2O3 and cerium oxide-zirconium oxide solid solution. We used porous polymeric beads as templates. These beads used for chromatographic purposes. For the synthesis of TiO2-M2O3 we used metal- alkoxides as precursor. The pore of beads were filled with precursor and then reacted with water to give transformation of the precursor to amorphous oxide network. The network is crystallized and template is removed by heat treatment at high temperatures. In a similar way we obtained porous spheres of CexZr1-xO2. For this we synthesized nanoparticle of CexZr1-xO2 and used then for the templating process to obtain porous CexZr1-xO2 spheres. Additionally, using the same nanoparticles we synthesized nano-porous powder using self-assembly process between a block-copolymers scaffold and nanoparticles. Morphological and physico-chemical properties of these materials were studies systematically by using various analytical techniques TiO2-M2O3 material were tested for photocatalytic degradation of 2-Chlorophenol a poisonous pollutant. While CexZr1-xO2 spheres were tested for methanol steam reforming reaction to generate hydrogen, which is a fuel for future generation power sources like fuel cells. All the materials showed good catalytic performance. KW - porous materials KW - metal oxides KW - catalytic application Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001324 ER - TY - THES A1 - Krasia, Theodora T1 - Synthese und kolloidale Eigenschaften neuartiger Blockcopolymere mit beta-Dicarbonyl Einheiten = Synthesis and colloidal properties of a novel type of block copolymers bearing beta-dicarbonyl residues T1 - Synthese und kolloidale Eigenschaften neuartiger Blockcopolymere mit beta-Dicarbonyl Einheiten N2 - The present work is dealing with the first synthesis and characterisation of amphiphilic diblock copolymers bearing b-dicarbonyl (acetoacetoxy) chelating residues. Polymers were obtained by Group Transfer Polymerisation (GTP)/acetoacetylation and controlled radical polymerisation techniques (RAFT).Different micellar morphologies of poly(n-butyl methacrylate)-block-poly[2-(acetoacetoxy)ethyl methacrylate] (pBuMA-b-pAEMA) were observed in cyclohexane as a selective solvent. Depending on the block length ratio, either spherical, elliptical, or cylindrical micelles were formed. The density of the polymer chains at the core/corona interface is considerably higher as compared to any other strongly segregating system reported in the literature. It is demonstrated that there are H-bond interactions existing between acetoacetoxy groups, which increase the incompatibility between block segments. In addition, such interactions lead to the formation of secondary structures (such as b-sheets or globular structures) and larger superstructures in the micrometer length scale.Block copolymers were also used to solubilise metal ion salts of different geometries and oxidation states in organic media, in which are otherwise insoluble. Sterically stabilised colloidal hybrid materials are formed, i.e. monodisperse micelles having the metal ion salt incorporated in their core upon complexation with the ligating pAEMA block, whereas pBuMA forms the solvating corona responsible for stabilisation in solution. Systematic studies show that the aggregation behaviour is dependent on different factors, such as the tautomeric form of the beta-dicarbonyl ligand (keto/enol) as well as the nature and amount of added metal ion salt. T2 - Synthesis and colloidal properties of a novel type of block copolymers bearing beta-dicarbonyl residues KW - amphiphilic block copolymers KW - chelates KW - Group Transfer polymerisation KW - reversible addition-fragmentation chain transfer KW - micelles KW - organic-inorganic c Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000787 ER - TY - THES A1 - Montenegro, Rivelino V. D. T1 - Crystallization, biomimetics and semiconducting polymers in confined systems T1 - Kristallisation, Biomimetik und halbleitende Polymere in räumlich begrenzten Systemen N2 - populärwissenschaftlicher Abstract: Kristallisation, Biomimetik und halbleitende Polymere in räumlich begrenzten Systemen: Öl und Wasser mischen sich nicht, man kann aber aus beiden Flüssigkeiten Emulsionen herstellen, bei denen Tröpfchen der einen Flüssigkeit in der anderen Flüssigkeit vorliegen. Das heißt, es können entweder Öltröpfchen in Wasser oder Wassertröpfchen in Öl erzeugt werden. Aus täglichen Erfahrungen, z.B. beim Kochen weiß man jedoch, dass sich eine Emulsion durch Schütteln oder Rühren herstellen lässt, diese jedoch nicht besonders stabil ist. Mit Hilfe von hohen Scherenergien kann man nun sehr kleine, in ihrer Größe sehr einheitliche und außerdem sehr stabile Tröpfchen von 1/10000 mm erhalten. Eine solche Emulsion wird Miniemulsion genannt. In der Dissertation wurden nun z.B. Miniemulsionen untersucht, die aus kleinen Wassertröpfchen in einem Öl bestehen. Es konnte gezeigt werden, dass das Wasser in diesen Tröpfchen, also in den räumlich begrenzten Systemen, nicht bei 0 °C, sondern bei -22 °C kristallisierte. Wie lässt sich das erklären? Wenn man einen Eimer Wasser hat, dann bildet sich normalerweise bei 0 °C Eis, da nämlich in dem Wasser einige (manchmal ganz wenige) Keime (z.B. Schutzteilchen, ein Fussel etc.) vorhanden sind, an denen sich die ersten Kristalle bilden. Wenn sich dann einmal ein Kristall gebildet hat, kann das Wasser im gesamten Eimer schnell zu Eis werden. Ultrareines Wasser würde bei -22 °C kristallisieren. Wenn man jetzt die Menge Wasser aus dem Eimer in kleine Tröpfchen bringt, dann hat man eine sehr, sehr große Zahl, nämlich 1017 Tröpfchen, in einem Liter Emulsion vorliegen. Die wenigen Schmutzpartikel verteilen auf sehr wenige Tröpfchen, die anderen Tröpfchen sind ultrarein. Daher kristallisieren sie erst bei -22 °C. Im Rahmen der Arbeit konnte auch gezeigt werden, dass die Miniemulsionen genutzt werden können, um kleine Gelatine-Partikel, also Nanogummibärchen, herzustellen. Diese Nanogummibärchen quellen bei Erhöhung der Temperatur auf ca. 38 °C an. Das kann ausgenutzt werden, um zum Beispiel Medikamente zunächst in den Partikeln im menschlichen Körper zu transportieren, die Medikamente werden dann an einer gewünschten Stelle freigelassen. In der Arbeit wurde auch gezeigt, dass die Gelatine-Partikel genutzt werden können, um die Natur nachzuahnen (Biomimetik). Innerhalb der Partikel kann nämlich gezielt Knochenmaterial aufgebaut werden kann. Die Gelatine-Knochen-Partikel können dazu genutzt werden, um schwer heilende oder komplizierte Knochenbrüche zu beheben. Gelatine wird nämlich nach einigen Tagen abgebaut, das Knochenmaterial kann in den Knochen eingebaut werden. LEDs werden heute bereits vielfältig verwendet. LEDs bestehen aus Halbleitern, wie z.B. Silizium. Neuerdings werden dazu auch halbleitende Polymere eingesetzt. Das große Problem bei diesen Materialien ist, dass sie aus Lösungsmitteln aufgebracht werden. Im Rahmen der Doktorarbeit wurde gezeigt, dass der Prozess der Miniemulsionen genutzt werden kann, um umweltfreundlich diese LEDs herzustellen. Man stellt dazu nun wässrige Dispersionen mit den Polymerpartikeln her. Damit hat man nicht nur das Lösungsmittel vermieden, das hat nun noch einen weiteren Vorteil: man kann nämlich diese Dispersion auf sehr einfache Art verdrucken, im einfachsten Fall verwendet man einfach einen handelsüblichen Tintenstrahldrucker. N2 - The colloidal systems are present everywhere in many varieties such as emulsions (liquid droplets dispersed in liquid), aerosols (liquid dispersed in gas), foam (gas in liquid), etc. Among several new methods for the preparation of colloids, the so-called miniemulsion technique has been shown to be one of the most promising. Miniemulsions are defined as stable emulsions consisting of droplets with a size of 50-500 nm by shearing a system containing oil, water, a surfactant, and a highly water insoluble compound, the so-called hydrophobe 1. In the first part of this work, dynamic crystallization and melting experiments are described which were performed in small, stable and narrowly distributed nanodroplets (confined systems) of miniemulsions. Both regular and inverse systems were examined, characterizing, first, the crystallization of hexadecane, secondly, the crystallization of ice. It was shown for both cases that the temperature of crystallization in such droplets is significantly decreased (or the required undercooling is increased) as compared to the bulk material. This was attributed to a very effective suppression of heterogeneous nucleation. It was also found that the required undercooling depends on the nanodroplet size: with decreasing droplet size the undercooling increases. 2. It is shown that the temperature of crystallization of other n-alkanes in nanodroplets is also significantly decreased as compared to the bulk material due to a very effective suppression of heterogeneous nucleation. A very different behavior was detected between odd and even alkanes. In even alkanes, the confinement in small droplets changes the crystal structure from a triclinic (as seen in bulk) to an orthorhombic structure, which is attributed to finite size effects inside the droplets. An intermediate metastable rotator phase is of less relevance for the miniemulsion droplets than in the bulk. For odd alkanes, only a strong temperature shift compared to the bulk system is observed, but no structure change. A triclinic structure is formed both in bulk and in miniemulsion droplets. 3. In the next part of the thesis it is shown how miniemulsions could be successfully applied in the development of materials with potential application in pharmaceutical and medical fields. The production of cross-linked gelatin nanoparticles is feasible. Starting from an inverse miniemulsion, the softness of the particles can be controlled by varying the initial concentration, amount of cross-link agent, time of cross-linking, among other parameters. Such particles show a thermo-reversible effect, e.g. the particles swell in water above 37 °C and shrink below this temperature. Above 37 °C the chains loose the physical cross-linking, however the particles do not loose their integrity, because of the chemical cross-linking. Those particles have potential use as drug carriers, since gelatin is a natural polymer derived from collagen. 4. The cross-linked gelatin nanoparticles have been used for the biomineralization of hydroxyapatite (HAP), a biomineral, which is the major constituent of our bones. The biomineralization of HAP crystals within the gelatin nanoparticles results in a hybrid material, which has potential use as a bone repair material. 5. In the last part of this work we have shown that layers of conjugated semiconducting polymers can be deposited from aqueous dispersion prepared by the miniemulsion process. Dispersions of particles of different conjugated semiconducting polymers such as a ladder-type poly(para-phenylene) and several soluble derivatives of polyfluorene could be prepared with well-controlled particle sizes ranging between 70 - 250 nm. Layers of polymer blends were prepared with controlled lateral dimensions of phase separation on sub-micrometer scales, utilizing either a mixture of single component nanoparticles or nanoparticles containing two polymers. From the results of energy transfer it is demonstrated that blending two polymers in the same particle leads to a higher efficiency due to the better contact between the polymers. Such an effect is of great interest for the fabrication of opto-electronic devices such as light emitting diodes with nanometer size emitting points and solar cells comprising of blends of electron donating and electron accepting polymers. KW - Confinement KW - miniemulsion KW - crystallization KW - biomimetics and semiconducting polymers Y1 - 2003 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000726 ER - TY - THES A1 - Johann, Robert T1 - Thermodynamic, morphological and structural properties of dissociated fatty acid monolayers at the air-water interface N2 - Untersuchungen an Monoschichten amphiphiler Lipide auf wässriger Lösung sind in der Grenzflächenforschung von grundlegender Bedeutung. Aufgrund der Anwendbarkeit zahlreicher analytischer Methoden sind schwimmende unlösliche Monoschichten als Modellsysteme sehr geeignet, um Ordnung und Strukturbildung sowie den Transport von Materie in zwei Dimensionen oder die Wechselwirkung von Molekülen an der Grenzfläche mit Teilchen in Lösung (Stichwort “molekulare Erkennung”) zu studieren. Aus dem Verhalten von Monoschichten lassen sich z. B. Rückschlüsse ziehen auf die Eigenschaften von Lipidschichten auf festen Substraten oder in biologischen Membranen. Diese Arbeit befasst sich mit spezifischen und fundamentalen Wechselwirkungen in Monoschichten sowohl auf molekularer als auch auf mikroskopischer Ebene und deren Beziehung zu Gitterstruktur, Aussehen und thermodynamischem Verhalten von Monoschichten an der Wasser/Luft Grenzfläche. Als Modellsystem werden hauptsächlich Monoschichten langkettiger Fettsäuren verwendet, da in ihnen die molekularen Wechselwirkungen durch Änderung des Subphasen-pH-Werts über den Dissoziationsgrad gezielt und schrittweise verändert werden können. Ausser über die Subphasenzusammensetzung werden die molekularen Wechselwirkungen auch über die Temperatur und die Monoschichtzusammensetzung systematisch variiert. Mit Hilfe von Isothermen- und Oberflächenpotentialmessungen, Brewsterwinkel-Mikroskopie, Röntgenbeugung unter streifendem Einfall und polarisationsmodulierter Infrarot-Reflexions-Absorptions-Spektroskopie wird die Änderung der Monoschichteigenschaften als Funktion eines äusseren Parametern analysiert. Dabei werden aus den Röntgenbeugungsdaten quantitative Masse für die molekularen Wechselwirkungen und für die Kettenkonformationsordnung in Monoschichten abgeleitet. Zu den interessantesten Ergebnissen dieser Arbeit zählen die Aufklärung des Ursprungs von regelmässigen polygonalen und dendritischen Domänenformen, die vielfältige Wirkung von Cholesterin auf die Molekülpackung und Gitterordnung langkettiger Amphiphile, sowie die Entdeckung einer abrupten Änderung in den Kopfgruppenbindungswechselwirkungen, der Kettenkonformationsordnung und des Phasenübergangsdrucks zwischen geneigten Monoschichtphasen in Fettsäuremonoschichten nahe pH 9. Zur Deutung des letzten Punkts wird ein Modell für die Kopfgruppenbindungsstruktur von Fettsäuremonoschichten als Funktion des pH-Werts entwickelt. N2 - Research on monolayers of amphiphilic lipids on aqueous solution is of basic importance in surface science. Due to the applicability of a variety of surface sensitive techniques, floating insoluble monolayers are very suitable model systems for the study of order, structure formation and material transport in two dimensions or the interactions of molecules at the interface with ions or molecules in the bulk (headword 'molecular recognition'). From the behavior of monolayers conclusions can be drawn on the properties of lipid layers on solid substrates or in biological membranes. This work deals with specific and fundamental interactions in monolayers both on the molecular and on the microscopic scale and with their relation to the lattice structure, morphology and thermodynamic behavior of monolayers at the air-water interface. As model system especially monolayers of long chain fatty acids are used, since there the molecular interactions can be gradually adjusted by varying the degree of dissociation by means of the suphase pH value. For manipulating the molecular interactions besides the subphase composition also temperature and monolayer composition are systematically varied. The change in the monolayer properties as a function of an external parameter is analyzed by means of isotherm and surface potential measurements, Brewster-angle microscopy, X-ray diffraction at grazing incidence and polarization modulated infrared reflection absorption spectroscopy. For this a quantitative measure for the molecular interactions and for the chain conformational order is derived from the X-ray data. The most interesting results of this work are the elucidation of the origin of regular polygonal and dendritic domain shapes, the various effects of cholesterol on molecular packing and lattice order of long chain amphiphiles, as well as the detection of an abrupt change in the head group bonding interactions, the chain conformational order and the phase transition pressure between tilted phases in fatty acid monolayers near pH 9. For the interpretation of the latter point a model of the head group bonding structure in fatty acid monolayers as a function of the pH value is developed. KW - Wasseroberfläche KW - Fettsäuren KW - Monoschicht KW - Dissoziation KW - Thermodynamische Eigenschaft KW - Strukturbildung KW - Langmuir Monoschicht KW - Fettsäure KW - Cholesterin KW - Brewsterwinkel-Mikroskopie KW - GIXD KW - Oberflächenpotential KW - Isothermen KW - Linienspannung Y1 - 2001 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0000050 ER -