TY - JOUR A1 - Schulze, Nicole A1 - Koetz, Joachim T1 - Kinetically controlled growth of gold nanotriangles in a vesicular template phase by adding a strongly alternating polyampholyte JF - Journal of dispersion science and technology N2 - This paper is focused on the temperature-dependent synthesis of gold nanotriangles in a vesicular template phase, containing phosphatidylcholine and AOT, by adding the strongly alternating polyampholyte PalPhBisCarb. UV-vis absorption spectra in combination with TEM micrographs show that flat gold nanoplatelets are formed predominantly in the presence of the polyampholyte at 45°C. The formation of triangular and hexagonal nanoplatelets can be directly influenced by the kinetic approach, i.e., by varying the polyampholyte dosage rate at 45°C. Corresponding zeta potential measurements indicate that a temperature-dependent adsorption of the polyampholyte on the {111} faces will induce the symmetry breaking effect, which is responsible for the kinetically controlled hindered vertical and preferred lateral growth of the nanoplatelets. KW - Kinetically controlled nanocrystal growth KW - nanotriangles KW - polyampholytes Y1 - 2016 U6 - https://doi.org/10.1080/01932691.2016.1220318 SN - 0193-2691 SN - 1532-2351 VL - 38 IS - 8 SP - 1073 EP - 1078 PB - Taylor & Francis CY - Philadelphia ER - TY - GEN A1 - Bourgat, Yannick A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Menzel, Henning T1 - Enzyme degradable polymersomes from chitosan-g-[poly-l-lysine-block-epsilon-caprolactone] copolymer T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - The scope of this study includes the synthesis of chitosan-g-[peptide-poly-epsilon-caprolactone] and its self-assembly into polymeric vesicles employing the solvent shift method. In this way, well-defined core-shell structures suitable for encapsulation of drugs are generated. The hydrophobic polycaprolactone side-chain and the hydrophilic chitosan backbone are linked via an enzyme-cleavable peptide. The synthetic route involves the functionalization of chitosan with maleimide groups and the preparation of polycaprolactone with alkyne end-groups. A peptide functionalized with a thiol group on one side and an azide group on the other side is prepared. Thiol-ene click-chemistry and azide-alkyne Huisgen cycloaddition are then used to link the chitosan and poly-epsilon-caprolactone chains, respectively, with this peptide. For a preliminary study, poly-l-lysin is a readily available and cleavable peptide that is introduced to investigate the feasibility of the system. The size and shape of the polymersomes are studied by dynamic light scattering and cryo-scanning electron microscopy. Furthermore, degradability is studied by incubating the polymersomes with two enzymes, trypsin and chitosanase. A dispersion of polymersomes is used to coat titanium plates and to further test the stability against enzymatic degradation. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1382 KW - chitosan KW - click chemistry KW - drug delivery system KW - enzyme KW - polymersomes KW - poly‐ ε ‐ caprolactone Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-566584 SN - 1866-8372 IS - 1 ER - TY - JOUR A1 - Ihlenburg, Ramona A1 - Mai, Tobias A1 - Thünemann, Andreas F. A1 - Baerenwald, Ruth A1 - Saalwächter, Kay A1 - Koetz, Joachim A1 - Taubert, Andreas T1 - Sulfobetaine hydrogels with a complex multilength-scale hierarchical structure JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - Hydrogels with a hierarchical structure were prepared from a new highly water-soluble crosslinker N,N,N',N'-tetramethyl-N,N'-bis(2-ethylmethacrylate)-propyl-1,3-diammonium dibromide and from the sulfobetaine monomer 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate. The free radical polymerization of the two compounds is rapid and yields near-transparent hydrogels with sizes up to 5 cm in diameter. Rheology shows a clear correlation between the monomer-to-crosslinker ratio and the storage and loss moduli of the hydrogels. Cryo-scanning electron microscopy, low-field nuclear magnetic resonance (NMR) spectroscopy, and small-angle X-ray scattering show that the gels have a hierarchical structure with features spanning the nanometer to the sub-millimeter scale. The NMR study is challenged by the marked inhomogeneity of the gels and the complex chemical structure of the sulfobetaine monomer. NMR spectroscopy shows how these complications can be addressed via a novel fitting approach that considers the mobility gradient along the side chain of methacrylate-based monomers. KW - Defects KW - Hydrogels KW - Nuclear magnetic resonance spectroscopy KW - Scattering KW - X-ray scattering Y1 - 2021 U6 - https://doi.org/10.1021/acs.jpcb.0c10601 SN - 1520-6106 SN - 1520-5207 VL - 125 IS - 13 SP - 3398 EP - 3408 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Gharabekyan, Hrant H. A1 - Koetz, Joachim A1 - Poghosyan, Armen H. T1 - A protonated L-cysteine adsorption on gold surface BT - a molecular dynamics study JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - The adsorption of protonated L-cysteine onto Au(111) surface was studied via molecular dynamics method. The detailed examination of trajectories reveals that a couple of picoseconds need to be strongly adsorbed at the gold surface via L-cysteine's sulfur and oxygen atoms. The average distances of L-cysteine's adsorbed sulfur and oxygen from gold plane are-2.7 angstrom and-3.2 angstrom, correspondingly. We found that the adsorption of L-cysteine takes place preferentially at bridge site with possibility of-82%. Discussing the conformation features of protonated L-cysteine, we consider that the most stable conformation of protonated L-cysteine is "reverse boat" position, where sulfur and oxygen pointed down to the gold surface, while the amino group is far from the gold surface. KW - MD simulations KW - gold surface KW - GOIP KW - l-cysteine KW - adsorption KW - protonation Y1 - 2021 U6 - https://doi.org/10.1016/j.colsurfa.2021.127452 SN - 0927-7757 SN - 1873-4359 VL - 629 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Schmitt, Clemens Nikolaus Zeno A1 - Thünemann, Andreas F. A1 - Prietzel, Claudia Christina A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - Gold nanotriangles with crumble topping and their influence on catalysis and surface-enhanced raman spectroscopy JF - ChemPlusChem N2 - By adding hyaluronic acid (HA) to dioctyl sodium sulfosuccinate (AOT)-stabilized gold nanotriangles (AuNTs) with an average thickness of 7.5 +/- 1 nm and an edge length of about 175 +/- 17 nm, the AOT bilayer is replaced by a polymeric HA-layer leading to biocompatible nanoplatelets. The subsequent reduction process of tetrachloroauric acid in the HA-shell surrounding the AuNTs leads to the formation of spherical gold nanoparticles on the platelet surface. With increasing tetrachloroauric acid concentration, the decoration with gold nanoparticles can be tuned. SAXS measurements reveal an increase of the platelet thickness up to around 14.5 nm, twice the initial value of bare AuNTs. HRTEM micrographs show welding phenomena between densely packed particles on the platelet surface, leading to a crumble formation while preserving the original crystal structure. Crumbles crystallized on top of the platelets enhance the Raman signal by a factor of around 20, and intensify the plasmon-driven dimerization of 4-nitrothiophenol (4-NTP) to 4,4 '-dimercaptoazobenzene in a yield of up to 50 %. The resulting crumbled nanotriangles, with a biopolymer shell and the absorption maximum in the second window for in vivo imaging, are promising candidates for biomedical sensing. KW - gold nanostructures KW - HRTEM KW - hyaluronic acid KW - monolayer formation KW - SERS Y1 - 2020 U6 - https://doi.org/10.1002/cplu.201900745 SN - 2192-6506 VL - 85 IS - 3 SP - 519 EP - 526 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Fortes Martín, Rebeca A1 - Thünemann, Andreas F. A1 - Stockmann, Jörg M. A1 - Radnik, Jörg A1 - Koetz, Joachim T1 - From nanoparticle heteroclusters to filament networks by self-assembly at the water-oil interface of reverse microemulsions JF - Langmuir : the ACS journal of surfaces and colloids / American Chemical Society N2 - Surface self-assembly of spherical nanoparticles of sizes below 10 nm into hierarchical heterostructures is under arising development despite the inherent difficulties of obtaining complex ordering patterns on a larger scale. Due to template-mediated interactions between oil-dispersible superparamagnetic nanoparticles (MNPs) and polyethylenimine- stabilized gold nanoparticles (Au(PEI)NPs) at the water-oil interface of microemulsions, complex nanostructured films can be formed. Characterization of the reverse microemulsion phase by UV-vis absorption revealed the formation of heteroclusters from Winsor type II phases (WPII) using Aerosol-OT (AOT) as the surfactant. SAXS measurements verify the mechanism of initial nanoparticle clustering in defined dimensions. XPS suggested an influence of AOT at the MNP surface. Further, cryo-SEM and TEM visualization demonstrated the elongation of the reverse microemulsions into cylindrical, wormlike structures, which subsequently build up larger nanoparticle superstructure arrangements. Such WPII phases are thus proven to be a new form of soft template, mediating the self-assembly of different nanoparticles in hierarchical network-like filaments over a substrate during solvent evaporation. KW - Emulsions KW - Liquids KW - Nanoparticles KW - Water KW - X-ray scattering Y1 - 2021 U6 - https://doi.org/10.1021/acs.langmuir.1c01348 SN - 0743-7463 VL - 37 IS - 29 SP - 8876 EP - 8885 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Henning, Ricky A1 - Liebig, Ferenc A1 - Prietzel, Claudia Christina A1 - Klemke, Bastian A1 - Koetz, Joachim T1 - Gold nanotriangles with magnetite satellites JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - This work describes the synthesis of hybrid particles of gold nanotriangles (AuNTs) with magnetite nanoparticles (MNPs) by using 1-mercaptopropyl-3-trimethoxysilan (MPTMS) and L-cysteine as linker molecules. Due to the combination of superparamagnetic properties of MNPs with optical properties of the AuNTs, nanoplatelet-satellite hybrid nanostructures with combined features become available. By using MPTMS with silan groups as linker molecule a magnetic "cloud" with embedded AuNTs can be separated. In presence of L-cysteine as linker molecule at pH > pH(iso) a more unordered aggregate structure of MNPs is obtained due to the dimerization of the L-cysteine. At pH < pH(iso) water soluble positively charged AuNTs with satellite MNPs can be synthesized. The time-dependent loading with MNP satellites under release of the extinction and magnetization offer a hybrid material, which is of special relevance for biomedical applications and plasmonic catalysis. KW - nanotriangles KW - Superparamagnetic magnetite KW - Satellite hybrid KW - nanostructures KW - L-Cysteine KW - UV-Vis-NIR KW - HRTEM Y1 - 2020 U6 - https://doi.org/10.1016/j.colsurfa.2020.124913 SN - 0927-7757 SN - 1873-4359 VL - 600 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Raju, Rajarshi Roy A1 - Koetz, Joachim T1 - Pickering Janus emulsions stabilized with gold nanoparticles JF - Langmuir : the ACS journal of surfaces and colloids / American Chemical Society N2 - We report a modified approach to the batch scale preparation of completely engulfed core-shell emulsions or partially engulfed Janus emulsions with colorful optical properties, containing water, olive oil, and silicone oil. The in situ reduction of gold chloride, forming gold nanoparticles (AuNPs) at the olive oil interface in the absence or presence of chitosan, leads to the formation of compartmentalized olive-silicone oil emulsion droplets in water. In the absence of additional reducing components, time-dependent morphological transformations from partial engulfment to complete engulfment were observed. Similar experiments in the presence of chitosan or presynthesized AuNPs show an opposite time-dependent trend of transformation of core-shell structures into partially engulfed ones. This behavior can be understood by a time-dependent rearrangement of the AuNPs at the interface and changes of the interfacial tension. The Pickering effect of AuNPs at oil-water and oil-oil interfaces brings not only color effects to individual microdroplets, which are of special relevance for the preparation of new optical elements, but also a surprising self-assembly of droplets. Y1 - 2022 U6 - https://doi.org/10.1021/acs.langmuir.1c02256 SN - 0743-7463 SN - 1520-5827 VL - 38 IS - 1 SP - 147 EP - 155 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Fortes Martín, Rebeca A1 - Prietzel, Claudia Christina A1 - Koetz, Joachim T1 - Template-mediated self-assembly of magnetite-gold nanoparticle superstructures at the water-oil interface of AOT reverse microemulsions JF - Journal of colloid and interface science N2 - Hypothesis: Bimetallic magnetite-gold nanostructures are interesting candidates to combine and enhance individual properties of each metal element in catalytic and analytical applications. Microemulsions have been employed in templated synthesis of nanoparticles, and their combination with different types of nanoparticles can further mediate interactions at the water-oil interface, providing new forms of hybrid nanostructures. Experiments: Reverse water-in-oil microemulsions of droplet sizes below 50 nm were prepared from ternary mixtures of Aerosol-OT (AOT) as surfactant, incorporating 4 nm sized superparamagnetic nanoparticles (MNPs) to the hexane-pentanol oil phase and 5 nmsized polyethyleneimine-stabilized gold nanoparticles (Au(PEI)-NPs) to the water phase. The resulting isotropic L-2 phase, Winsor phases and organized nanostructures were investigated using conductometry, calorimetry, UV-Vis spectroscopy, cryoSEM and HRTEM. Findings: Droplet-droplet interactions, morphology and surfactant film properties of AOT microemulsions could be modulated in different ways by the presence of the different nanoparticles from each liquid phase. Additionally, phase separation into Winsor phases allows the formation upon solvent evaporation of films with bimetallic heterostructures on the micrometer scale. This demonstrates a new way of nanoparticle templated assembly at liquid interfaces by assisted interactions between microemulsions and nanoparticles, as a promising strategy to obtain thin films of small, isotropic nanoparticles with hierarchical ordering. KW - AOT KW - Magnetite-gold nanoparticles KW - Microemulsions KW - Percolation KW - Templated self-assembly KW - Winsor phases Y1 - 2021 U6 - https://doi.org/10.1016/j.jcis.2020.07.079 SN - 0021-9797 SN - 1095-7103 VL - 581 IS - Part A SP - 44 EP - 55 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Bourgat, Yannick A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Menzel, Henning T1 - Enzyme degradable polymersomes from chitosan-g-[poly-l-lysine-block-epsilon-caprolactone] copolymer JF - Macromolecular bioscience N2 - The scope of this study includes the synthesis of chitosan-g-[peptide-poly-epsilon-caprolactone] and its self-assembly into polymeric vesicles employing the solvent shift method. In this way, well-defined core-shell structures suitable for encapsulation of drugs are generated. The hydrophobic polycaprolactone side-chain and the hydrophilic chitosan backbone are linked via an enzyme-cleavable peptide. The synthetic route involves the functionalization of chitosan with maleimide groups and the preparation of polycaprolactone with alkyne end-groups. A peptide functionalized with a thiol group on one side and an azide group on the other side is prepared. Thiol-ene click-chemistry and azide-alkyne Huisgen cycloaddition are then used to link the chitosan and poly-epsilon-caprolactone chains, respectively, with this peptide. For a preliminary study, poly-l-lysin is a readily available and cleavable peptide that is introduced to investigate the feasibility of the system. The size and shape of the polymersomes are studied by dynamic light scattering and cryo-scanning electron microscopy. Furthermore, degradability is studied by incubating the polymersomes with two enzymes, trypsin and chitosanase. A dispersion of polymersomes is used to coat titanium plates and to further test the stability against enzymatic degradation. KW - chitosan KW - click chemistry KW - drug delivery system KW - enzyme KW - polymersomes KW - poly‐ ε ‐ caprolactone Y1 - 2020 U6 - https://doi.org/10.1002/mabi.202000259 SN - 1616-5187 SN - 1616-5195 VL - 21 IS - 1 SP - 1 EP - 9 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - von Klitzing, Regine A1 - Stehl, Dimitrij A1 - Pogrzeba, Tobias A1 - Schomaäcker, Reinhard A1 - Minullina, Renata A1 - Panchal, Abhishek A1 - Konnova, Svetlana A1 - Fakhrullin, Rawil A1 - Koetz, Joachim A1 - Moehwald, Helmuth A1 - Lvov, Yuri T1 - Halloysites Stabilized Emulsions for Hydroformylation of Long Chain Olefins JF - Advanced materials interfaces N2 - Halloysites as tubular alumosilicates are introduced as inexpensive natural nanoparticles to form and stabilize oil-water emulsions. This stabilized emulsion is shown to enable efficient interfacial catalytic reactions. Yield, selectivity, and product separation can be tremendously enhanced, e.g., for the hydroformylation reaction of dodecene to tridecanal. In perspective, this type of formulation may be used for oil spill dispersions. The key elements of the described formulations are clay nanotubes (halloysites) which are highly anisometric, can be filled by helper molecules, and are abundantly available in thousands of tons, making this technology scalable for industrial applications. Y1 - 2016 U6 - https://doi.org/10.1002/admi.201600435 SN - 2196-7350 VL - 4 IS - 1 PB - Wiley CY - Hoboken ER - TY - JOUR A1 - Raju, Rajarshi Roy A1 - Koetz, Joachim T1 - Inner rotation of Pickering Janus emulsions JF - Nanomaterials : open access journal N2 - Janus droplets were prepared by vortex mixing of three non-mixable liquids, i.e., olive oil, silicone oil and water, in the presence of gold nanoparticles (AuNPs) in the aqueous phase and magnetite nanoparticles (MNPs) in the olive oil. The resulting Pickering emulsions were stabilized by a red-colored AuNP layer at the olive oil/water interface and MNPs at the oil/oil interface. The core–shell droplets can be stimulated by an external magnetic field. Surprisingly, an inner rotation of the silicon droplet is observed when MNPs are fixed at the inner silicon droplet interface. This is the first example of a controlled movement of the inner parts of complex double emulsions by magnetic manipulation via interfacially confined magnetic nanoparticles. KW - Janus droplets KW - Pickering emulsions KW - magnetic manipulation KW - gold nanoparticles KW - magnetite nanoparticles Y1 - 2021 U6 - https://doi.org/10.3390/nano11123312 SN - 2079-4991 VL - 11 IS - 12 PB - MDPI CY - Basel ER - TY - GEN A1 - Raju, Rajarshi Roy A1 - Koetz, Joachim T1 - Inner Rotation of Pickering Janus Emulsions T2 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - Janus droplets were prepared by vortex mixing of three non-mixable liquids, i.e., olive oil, silicone oil and water, in the presence of gold nanoparticles (AuNPs) in the aqueous phase and magnetite nanoparticles (MNPs) in the olive oil. The resulting Pickering emulsions were stabilized by a red-colored AuNP layer at the olive oil/water interface and MNPs at the oil/oil interface. The core–shell droplets can be stimulated by an external magnetic field. Surprisingly, an inner rotation of the silicon droplet is observed when MNPs are fixed at the inner silicon droplet interface. This is the first example of a controlled movement of the inner parts of complex double emulsions by magnetic manipulation via interfacially confined magnetic nanoparticles. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1249 KW - Janus droplets KW - Pickering emulsions KW - magnetic manipulation KW - gold nanoparticles KW - magnetite nanoparticles Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-553628 SN - 1866-8372 IS - 1249 ER - TY - JOUR A1 - Rumschöttel, Jens A1 - Baus, Susann A1 - Kosmella, Sabine A1 - Appelhans, Dietmar A1 - Koetz, Joachim T1 - Incorporation of DNA/PEI polyplexes into gelatin/chitosan hydrogel scaffolds BT - a mu-DSC study JF - Composite interfaces N2 - Polyplexes between a double-stranded Salmon DNA and hyperbranched poly(ethyleneimine) (PEI) as well as a maltosylated PEI-Mal were incorporated into a gelatin/chitosan hydrogel scaffold. Calorimetric experiments of the polyplexes show a decrease of the melting temperature in presence of PEI and a peak splitting in presence of PEI-Mal, which can be interpreted to a partial compaction of the DNA strands in presence of PEI-Mal. When the polyplexes are incorporated into a gelatin/chitosan scaffold in the swollen state, the DNA melting peaks at 90 and 93 degrees C, respectively, indicate in both cases the release of the DNA at the surface of the hydrogel scaffold in a more compact form. Specific interactions between the PEI-Mal shell and gelatin are responsible for the tuning of the release properties in presence of the maltose units in the hyperbranched PEI. KW - DNA-PEI polyplexes KW - maltosylated poly(ethyleneimine) KW - mu-DSC KW - DNA release KW - gelatin/chitosan hydrogel scaffold Y1 - 2017 U6 - https://doi.org/10.1080/09276440.2017.1302725 SN - 1568-5543 VL - 25 IS - 1 SP - 1 EP - 11 PB - Routledge, Taylor & Francis Group CY - Abingdon ER - TY - JOUR A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Schmitt, Clemens Nikolaus Zeno A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - Tuned Surface-Enhanced raman scattering performance of undulated Au@Ag triangles JF - ACS applied nano materials N2 - Negatively charged ultraflat gold nanotriangles (AuNTs) stabilized by the anionic surfactant dioctyl sodium sulfosuccinate (AOT) were reloaded with the cationic surfactant benzylhexadecyldimethylammonium chloride (BDAC). Because of the spontaneous formation of a catanionic AOT micelle/BDAC bilayer onto the surface of the reloaded AuNTs, a reduction of Ag+ ions leads to the formation of spherical silver nanoparticles (AgNPs). With increasing concentration of AgNPs on the AuNTs, the localized surface plasmon resonance (LSPR) is shifted stepwise from 1300 to 800 nm. The tunable LSPR enables to shift the extinction maximum to the wavelength of the excitation laser of the Raman microscope at 785 nm. Surface-enhanced Raman scattering (SERS) experiments performed under resonance conditions show an SERS enhancement factor of the analyte molecule rhodamine RG6 of 5.1 X 10(5), which can be related to the silver hot spots at the periphery of the undulated gold nanoplatelets. KW - gold nanotriangles KW - catanionic surfactant bilayer KW - undulated nanoplatelets KW - SERS KW - LSPR Y1 - 2018 U6 - https://doi.org/10.1021/acsanm.8b00570 SN - 2574-0970 VL - 1 IS - 4 SP - 1995 EP - 2003 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Thünemann, Andreas F. A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - Undulated Gold Nanoplatelet Superstructures BT - In Situ Growth of Hemispherical Gold Nanoparticles onto the Surface of Gold Nanotriangles JF - Langmuir N2 - Negatively charged flat gold nanotriangles, formed in a vesicular template phase and separated by an AOT-micelle-based depletion flocculation, were reloaded by adding a cationic polyelectrolyte, that is, a hyperbranched polyethylenimine (PEI). Heating the system to 100 degrees C in the presence of a gold chloride solution, the reduction process leads to the formation of gold nanoparticles inside the polymer shell surrounding the nanoplatelets. The gold nanoparticle formation is investigated by UV-vis spectroscopy, small-angle X-ray scattering, and dynamic light scattering measurements in combination with transmission electron microscopy. Spontaneously formed gold clusters in the hyperbranched PEI shell with an absorption maximum at 350 nm grow on the surface of the nanotriangles as hemispherical particles with diameters of similar to 6 nm. High-resolution micrographs show that the hemispherical gold particles are crystallized onto the {111} facets on the bottom and top of the platelet as well as on the edges without a grain boundary. Undulated gold nanoplatelet superstructures with special properties become available, which show a significantly modified performance in SERS-detected photocatalysis regarding both reactivity and enhancement factor. Y1 - 2018 U6 - https://doi.org/10.1021/acs.langmuir.7b02898 SN - 0743-7463 VL - 34 IS - 15 SP - 4584 EP - 4594 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Raju, Rajarshi Roy A1 - Liebig, Ferenc A1 - Klemke, Bastian A1 - Koetz, Joachim T1 - pH-responsive magnetic Pickering Janus emulsions JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - We report ultrasonically generated pH-responsive Pickering Janus emulsions of olive oil and silicone oil with controllable droplet size and engulfment. Chitosan was used as a pH-responsive emulsifier. The increase of pH from 2 to 6 leads to a transition from completely engulfed double emulsion droplets to dumbbell-shaped Janus droplets accompanied by a significant decrease of droplet diameter and a more homogeneous size distribution. The results can be elucidated by the conformational change of chitosan from a more extended form at pH 2 to a more flexible form at pH 4-5. Magnetic responsiveness to the emulsion was attributed by dispersing superparamagnetic nanoparticles (Fe3O4 with diameter of 13 +/- 2 nm) in the olive oil phase before preparing the Janus emulsion. Incorporation of magnetic nanoparticles leads to superior emulsion stability, drastically reduced droplet diameters, and opened the way to control movement and orientation of the Janus droplets according to an external magnetic field. KW - Janus emulsion KW - Chitosan KW - pH-responsive KW - Magnetic-responsive KW - Cryo-SEM KW - TEM Y1 - 2018 U6 - https://doi.org/10.1007/s00396-018-4321-z SN - 0303-402X SN - 1435-1536 VL - 296 IS - 6 SP - 1039 EP - 1046 PB - Springer CY - New York ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Shahinyan, A. A. A1 - Koetz, Joachim T1 - Self-assembled monolayer formation of distorted cylindrical AOT micelles on gold surfaces JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - Self-assembling features of sodium dioctyl sulfosuccinate (AOT) molecules and micelle adsorption on gold Au (111) surfaces have been examined using molecular dynamics simulation. We argue that AOT micelles display a strong adsorption on gold surfaces resulting in distorted cylindrical micelles attached to the (111) facets. The well protected Au(111) facets decorated by a dense packed elongated ellipsoidal AOT layer hinder the diffusion of the reactant to the (111) facets and could result in the preferential growth of ultra-thin gold nanoplatelets. KW - Surfactant micelles KW - Adsorption KW - Gold surface KW - Molecular dynamics Y1 - 2018 U6 - https://doi.org/10.1016/j.colsurfa.2018.02.067 SN - 0927-7757 SN - 1873-4359 VL - 546 SP - 20 EP - 27 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Liebig, Ferenc A1 - Moreno, Silvia A1 - Thuenemann, Andreas F. A1 - Temme, Achim A1 - Appelhans, Dietmar A1 - Koetz, Joachim T1 - Toxicological investigations of "naked" and polymer-entrapped AOT-based gold nanotriangles JF - Colloids and surfaces : an international journal devoted to fundamental and applied research on colloid and interfacial phenomena in relation to systems of biological origin ; B, Biointerfaces N2 - Negatively charged ultrathin gold nanotriangles (AuNTs) were synthesized in a vesicular dioctyl sodium sulfosuccinate (AOT)/phospholipid-based template phase. These "naked" AuNTs with localized surface plasmon resonances in the NIR region at about 1300 nm and special photothermal properties are of particular interest for imaging and hyperthermia of cancerous tissues. For these kinds of applications the toxicity and the cellular uptake of the AuNTs is of outstanding importance. Therefore, this study focuses on the toxicity of "naked" AOT-stabilized AuNTs compared to polymer-coated AuNTs. Polymeric coating consisted of non-modified hyperbranched poly(ethyleneimine) (PEI), maltose-modified poly(ethyleneimine) (PEI-Mal) and heparin. The toxicological experiments were carried out with two different cell lines (embryonic kidney carcinoma cell line HEK293T and NK-cell leukemia cell line YTS). This study revealed that the heparin-coating of AuNTs improved biocompatibility by a factor of 50 when compared to naked AuNTs. Of note, the highest nontoxic concentration of the AuNTs coated with PEI and PEI-Mal is drastically decreased. Overall, this is mainly triggered by the different surface charges of polymeric coatings. Therefore, AuNTs coated with heparin were selected to carry out uptake studies. Their promising high biocompatibility and cellular uptake may open future studies in the field of biomedical applications. (C) 2018 Elsevier B.V. All rights reserved. KW - Gold nanotriangles KW - Polymer-coating KW - Toxicity KW - Heparin KW - Cellular uptake Y1 - 2018 U6 - https://doi.org/10.1016/j.colsurfb.2018.04.059 SN - 0927-7765 SN - 1873-4367 VL - 167 SP - 560 EP - 567 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Shahinyan, A. A. A1 - Koetz, Joachim T1 - Catanionic AOT/BDAC micelles on gold {111} surfaces JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - A sodium dioctyl sulfosuccinate (AOT)/benzyl hexadecyl dimethyl ammonium chloride (BDAC) mixed micelle self-organization and adsorption on gold Au(111) surfaces have been investigated using a molecular dynamics approach. The spherical AOT/BDAC mixed micelle is strongly adsorbed on the gold surface and is disoriented to a cylinder-like shape. KW - AOT/BDAC micelles KW - Gold surfaces KW - Molecular dynamics Y1 - 2018 U6 - https://doi.org/10.1007/s00396-018-4348-1 SN - 0303-402X SN - 1435-1536 VL - 296 IS - 8 SP - 1301 EP - 1306 PB - Springer CY - New York ER - TY - JOUR A1 - Noack, Sebastian A1 - Schanzenbach, Dirk A1 - Koetz, Joachim A1 - Schlaad, Helmut T1 - Polylactide-based amphiphilic block copolymers BT - Crystallization-Induced Self-Assembly and Stereocomplexation JF - Macromolecular rapid communications N2 - The aqueous self-assembly behavior of a series of poly(ethylene glycol)-poly(l-/d-lactide) block copolymers and corresponding stereocomplexes is examined by differential scanning calorimetry, dynamic light scattering, and transmission electron microscopy. Block copolymers assemble into spherical micelles and worm-like aggregates at room temperature, whereby the fraction of the latter seemingly increases with decreasing lactide weight fraction or hydrophobicity. The formation of the worm-like aggregates arises from the crystallization of the polylactide by which the spherical micelles become colloidally unstable and fuse epitaxically with other micelles. The self-assembly behavior of the stereocomplex aggregates is found to be different from that of the block copolymers, resulting in rather irregular-shaped clusters of spherical micelles and pearl-necklace-like structures. KW - crystallization KW - polylactide KW - self-assembly KW - stereocomplexation Y1 - 2018 U6 - https://doi.org/10.1002/marc.201800639 SN - 1022-1336 SN - 1521-3927 VL - 40 IS - 1 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Adamyan, Maksim P. A1 - Shahinyan, Aram A. A1 - Koetz, Joachim T1 - AOT Bilayer Adsorption on Gold Surfaces BT - A Molecular Dynamics Study JF - The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces & biophysical chemistry N2 - A molecular dynamics study was done to reveal the adsorption properties of sodium dioctyl sulfosuccinate (AOT) bilayers on gold Au(111) surfaces. Examining the rotational mobility of AOT molecules, we track that the correlation time of AOT molecules on the adsorbed layer is much higher. The data estimating the diffusive motion of AOT molecule show a substantially lower rate of diffusion (similar to 10(-10) cm(2)/s) in the adsorbed layers in comparison to other ones. The results show that an adsorbed layer is more rigid, whereas the outer layers undergo considerable lateral and vertical fluctuations. Y1 - 2019 U6 - https://doi.org/10.1021/acs.jpcb.8b11471 SN - 1520-6106 VL - 123 IS - 4 SP - 948 EP - 953 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Großkopf, Sören A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Mix, Andreas A1 - Hellweg, Thomas T1 - Shear-Induced Transformation of Polymer-Rich Lamellar Phases to Micron-Sized Vesicles JF - Langmuir N2 - In the present work, we study the shear-induced transformation of polymer-rich lamellar phases into vesicles. The evolution of vesicle size is studied by different scattering techniques, rheology, and microscopy methods. The lamellar phase found in the system D2O/o-xylene/Pluronic PE9400/C(8)TAB can be fully transformed to multilamellar vesicles (MLVs) by applying shear. The size of the MLVs is proportional to the inverse square root of the shear rate. Hence, the polymer based quaternary system behaves similar to lamellar phases based on small surfactant molecules. Additionally, we found a growth effect leading to a size increase of the vesicles after shearing was stopped. Y1 - 2019 U6 - https://doi.org/10.1021/acs.langmuir.8602786 SN - 0743-7463 VL - 35 IS - 8 SP - 3048 EP - 3057 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Preller, Tobias A1 - Runge-Borchert, Gundula A1 - Zellmer, Sabrina A1 - Menzel, Dirk A1 - Saein, Saeid Azimi A1 - Peters, Jan A1 - Raatz, Annika A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Garnweitner, Georg T1 - Particle-reinforced and functionalized hydrogels for SpineMan, a soft robotics application JF - Journal of materials science N2 - SpineMan is designed as a prototype of a soft robotic manipulator that is constructed of alternating hard and soft segments similar to the human spine. Implementing such soft segments allows to surpass the rigidity of conventional robots and ensures safer workspaces where humans and machines can work side by side with less stringent safety restrictions. Therefore, we used a hydrogel as viscoelastic material consisting of poly(vinyl alcohol) and borax. The mechanical properties of the hydrogel were tailored by embedding silica particles of various particles sizes as well as in different mass fractions. Increased mass contents as well as larger particle sizes led to strongly enhanced rigidity with a more than doubled storage modulus of the composite compared to the pure hydrogel. Furthermore, specific functionalities were induced by the incorporation of superparamagnetic Fe3O4 nanoparticles that can in principle be used for sensing robotic motion and detecting malfunctions. Therefore, we precisely adjusted the saturation magnetization of the soft segments using defined mass contents of the nanoparticles. To ensure long-time shape stability and prevention of atmospheric influences on the prepared composites, a silicone skin of specific shore hardness was used. The composites and the soft segments were characterized by oscillation measurements, cryo-SEM, bending tests and SQUID measurements, which give insights into the properties in the passive and in the moving state of SpineMan. The utilization of tailored composites led to highly flexible, reinforced and functional soft segments, which ensure stability, easy movability by springs of the shape memory alloy nitinol and prevention of total failure. Y1 - 2018 U6 - https://doi.org/10.1007/s10853-018-3106-6 SN - 0022-2461 SN - 1573-4803 VL - 54 IS - 5 SP - 4444 EP - 4456 PB - Springer CY - New York ER - TY - JOUR A1 - Kosmella, Sabine A1 - Klemke, Bastian A1 - Häusler, Ines A1 - Koetz, Joachim T1 - From gel-like Pickering emulsions to highly ordered superparamagnetic magnetite aggregates with embedded gold nanoparticles JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - Pickering emulsions with two types of nanoparticles, i.e., superparamagnetic magnetite nanoparticles dispersed in n-hexane and gold nanoparticles dispersed in water, were formed by rigorous mixing in presence of surface active polymeric surfactants. Monodisperse magnetite nanoparticles with a mean particle size of 4 nm were obtained by a microwave-assisted synthesis in n-hexane in presence of oleic acid, and gold nanoparticles were produced in aqueous solution in presence of the hyperbranched poly(ethyleneimine) (PEI) or sodium citrate as reducing and stabilizing agent. After mixing the prepared nanoparticle dispersions in presence of the Pluronics an intermediate gel-like phase is formed. The Pickering emulsion droplets in the intermediate phase are stabilized by both types of nanoparticles, as to be seen by cryo-SEM micrographs. After separating, solvent evaporation and redispersion in water highly ordered Pluronic-stabilized superparamagnetic magnetite nanoparticle aggregates with embedded gold nanoparticles can be obtained. KW - Pickering emulsions KW - Pluronics KW - Magnetite and gold nanoparticles KW - Ring tensiometry KW - Cryo-SEM KW - HRTEM KW - Magnetization measurements Y1 - 2019 U6 - https://doi.org/10.1016/j.colsurfa.2019.03.017 SN - 0927-7757 SN - 1873-4359 VL - 570 SP - 331 EP - 338 PB - Elsevier Science CY - Amsterdam ER - TY - GEN A1 - Ihlenburg, Ramona A1 - Lehnen, Anne-Catherine A1 - Koetz, Joachim A1 - Taubert, Andreas T1 - Sulfobetaine Cryogels for Preferential Adsorption of Methyl Orange from Mixed Dye Solutions T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - New cryogels for selective dye removal from aqueous solution were prepared by free radical polymerization from the highly water-soluble crosslinker N,N,N’,N’-tetramethyl-N,N’-bis(2-ethylmethacrylate)-propyl-1,3-diammonium dibromide and the sulfobetaine monomer 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate. The resulting white and opaque cryogels have micrometer sized pores with a smaller substructure. They adsorb methyl orange (MO) but not methylene blue (MB) from aqueous solution. Mixtures of MO and MB can be separated through selective adsorption of the MO to the cryogels while the MB remains in solution. The resulting cryogels are thus candidates for the removal of hazardous organic substances, as exemplified by MO and MB, from water. Clearly, it is possible that the cryogels are also potentially interesting for removal of other compounds such as pharmaceuticals or pesticides, but this must be investigated further. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1093 KW - cryogel KW - water treatment KW - dye removal KW - methyl orange KW - methylene blue KW - dye mixture Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-488987 SN - 1866-8372 IS - 1093 ER - TY - JOUR A1 - Ihlenburg, Ramona A1 - Lehnen, Anne-Catherine A1 - Koetz, Joachim A1 - Taubert, Andreas T1 - Sulfobetaine Cryogels for Preferential Adsorption of Methyl Orange from Mixed Dye Solutions JF - Polymers / Molecular Diversity Preservation International N2 - New cryogels for selective dye removal from aqueous solution were prepared by free radical polymerization from the highly water-soluble crosslinker N,N,N’,N’-tetramethyl-N,N’-bis(2-ethylmethacrylate)-propyl-1,3-diammonium dibromide and the sulfobetaine monomer 2-(N-3-sulfopropyl-N,N-dimethyl ammonium)ethyl methacrylate. The resulting white and opaque cryogels have micrometer sized pores with a smaller substructure. They adsorb methyl orange (MO) but not methylene blue (MB) from aqueous solution. Mixtures of MO and MB can be separated through selective adsorption of the MO to the cryogels while the MB remains in solution. The resulting cryogels are thus candidates for the removal of hazardous organic substances, as exemplified by MO and MB, from water. Clearly, it is possible that the cryogels are also potentially interesting for removal of other compounds such as pharmaceuticals or pesticides, but this must be investigated further. KW - cryogel KW - water treatment KW - dye removal KW - methyl orange KW - methylene blue KW - dye mixture Y1 - 2020 U6 - https://doi.org/10.3390/polym13020208 SN - 2073-4360 VL - 13 IS - 2 PB - MDPI CY - Basel ER - TY - JOUR A1 - Koetz, Joachim T1 - The Effect of Surface Modification of Gold Nanotriangles for Surface-Enhanced Raman Scattering Performance JF - Nanomaterials N2 - A surface modification of ultraflat gold nanotriangles (AuNTs) with different shaped nanoparticles is of special relevance for surface-enhanced Raman scattering (SERS) and the photo-catalytic activity of plasmonic substrates. Therefore, different approaches are used to verify the flat platelet morphology of the AuNTs by oriented overgrowth with metal nanoparticles. The most important part for the morphological transformation of the AuNTs is the coating layer, containing surfactants or polymers. By using well established AuNTs stabilized by a dioctyl sodium sulfosuccinate (AOT) bilayer, different strategies of surface modification with noble metal nanoparticles are possible. On the one hand undulated superstructures were synthesized by in situ growth of hemispherical gold nanoparticles in the polyethyleneimine (PEI)-coated AOT bilayer of the AuNTs. On the other hand spiked AuNTs were obtained by a direct reduction of Au³⁺ ions in the AOT double layer in presence of silver ions and ascorbic acid as reducing agent. Additionally, crumble topping of the smooth AuNTs can be realized after an exchange of the AOT bilayer by hyaluronic acid, followed by a silver-ion mediated reduction with ascorbic acid. Furthermore, a decoration with silver nanoparticles after coating the AOT bilayer with the cationic surfactant benzylhexadecyldimethylammonium chloride (BDAC) can be realized. In that case the ultraviolet (UV)-absorption of the undulated Au@Ag nanoplatelets can be tuned depending on the degree of decoration with silver nanoparticles. Comparing the Raman scattering data for the plasmon driven dimerization of 4-nitrothiophenol (4-NTP) to 4,4′-dimercaptoazobenzene (DMAB) one can conclude that the most important effect of surface modification with a 75 times higher enhancement factor in SERS experiments becomes available by decoration with gold spikes. KW - undulated KW - spiked and crumble gold nanotriangles KW - SERS enhancement factor KW - dimerization of 4-nitrothiophenol KW - AOT bilayer KW - PEI coating Y1 - 2020 U6 - https://doi.org/10.3390/nano10112187 SN - 2079-4991 VL - 10 IS - 11 PB - MDPI CY - Basel ER - TY - GEN A1 - Koetz, Joachim T1 - The Effect of Surface Modification of Gold Nanotriangles for Surface-Enhanced Raman Scattering Performance T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - A surface modification of ultraflat gold nanotriangles (AuNTs) with different shaped nanoparticles is of special relevance for surface-enhanced Raman scattering (SERS) and the photo-catalytic activity of plasmonic substrates. Therefore, different approaches are used to verify the flat platelet morphology of the AuNTs by oriented overgrowth with metal nanoparticles. The most important part for the morphological transformation of the AuNTs is the coating layer, containing surfactants or polymers. By using well established AuNTs stabilized by a dioctyl sodium sulfosuccinate (AOT) bilayer, different strategies of surface modification with noble metal nanoparticles are possible. On the one hand undulated superstructures were synthesized by in situ growth of hemispherical gold nanoparticles in the polyethyleneimine (PEI)-coated AOT bilayer of the AuNTs. On the other hand spiked AuNTs were obtained by a direct reduction of Au³⁺ ions in the AOT double layer in presence of silver ions and ascorbic acid as reducing agent. Additionally, crumble topping of the smooth AuNTs can be realized after an exchange of the AOT bilayer by hyaluronic acid, followed by a silver-ion mediated reduction with ascorbic acid. Furthermore, a decoration with silver nanoparticles after coating the AOT bilayer with the cationic surfactant benzylhexadecyldimethylammonium chloride (BDAC) can be realized. In that case the ultraviolet (UV)-absorption of the undulated Au@Ag nanoplatelets can be tuned depending on the degree of decoration with silver nanoparticles. Comparing the Raman scattering data for the plasmon driven dimerization of 4-nitrothiophenol (4-NTP) to 4,4′-dimercaptoazobenzene (DMAB) one can conclude that the most important effect of surface modification with a 75 times higher enhancement factor in SERS experiments becomes available by decoration with gold spikes. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1022 KW - undulated KW - spiked and crumble gold nanotriangles KW - SERS enhancement factor KW - dimerization of 4-nitrothiophenol KW - AOT bilayer KW - PEI coating Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-485172 SN - 1866-8372 IS - 1022 ER - TY - JOUR A1 - Note, Carine A1 - Koetz, Joachim A1 - Kosmella, Sabine T1 - Structural changes in poly(ethyleneimine) modified microemulsion JF - Journal of colloid and interface science N2 - The influence of branched poly(ethyleneimine) on the phase behavior of the system sodium dodecylsulfate/toluene-pentanol (1:1)/water has been studied. The isotropic microemulsions still exist when water is replaced with aqueous solutions of PEI (up to 30% in weight), but their stability is significantly influenced. From a polymer concentration of 20 wt%, the polymer enhances the solubilization of water in oil, changes the sign of the spontaneous curvature of the surfactant film, and induces an inversion of the microemulsion type from water-in-oil (L-2) to oil-in-water (L-1), by the formation of a bicontinuous channel. Further investigations show that the addition of polymer in the L-2 phase changes the droplet-droplet interactions as the conductivity drops and the percolation disappears. In the bicontinuous channel, higher viscosities can be detected, as well as a weak percolation followed by a steep increase of the conductivity, which can be related to evident structural changes in the system. DSC measurements allow then to follow the changes of the water properties in the system, from interfacial-water in the L-2 phase to free-water in the sponge-like phase. Finally, all the measurements performed permit to characterize the structural transitions in the system and to understand the role of the added polymer. KW - polyelectrolyte KW - microemulsion KW - bicontinuous phase Y1 - 2006 U6 - https://doi.org/10.1016/j.jcis.2006.06.071 SN - 0021-9797 VL - 302 SP - 662 EP - 668 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Teixeira, C. V. A1 - Blanzat, Muriel A1 - Koetz, Joachim A1 - Rico-Lattes, I. A1 - Brezesinski, Gerald T1 - In-plane miscibility and mixed bilayer microstructure in mixtures of catanionic glycolipids and zwitterionic phospholipids JF - Biochimica et biophysica acta : Biomembranes N2 - SAXS/WAXS studies were performed in combination with freeze fracture electron microscopy using mixtures of a new Gemini catanionic surfactant (Gem 16-12, formed by two sugar groups bound by a hydrocarbon spacer with 12 carbons and two 16-carbon chains) and the zwitterionic phospholipid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine(DPPC) to establish the phase diagram. Gem 16-12 in water forms bilayers with the same amount of hydration water as DPPC. A frozen interdigitated phase with a low hydration number is observed below room temperature. The kinetics of the formation of this crystalline phase is very slow. Above the chain melting temperature, multilayered vesicles are formed. Mixing with DPPC produces mixed bilayers above the corresponding chain melting temperature. At room temperature, partially lamellar aggregates with local nematic order are observed. Splitting of infinite lamellae into discs is linked to immiscibility in frozen state. The ordering process is always accompanied by dehydration of the system. As a consequence, an unusual order-disorder phase transition upon cooling is observed. KW - SAXS KW - bilayer KW - gemini surfactant KW - ordering process KW - Anti-HIV KW - miscibility Y1 - 2006 U6 - https://doi.org/10.1016/j.bbamem.2006.05.025 SN - 0005-2736 VL - 1758 SP - 1797 EP - 1808 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Note, Carine A1 - Kosmella, Sabine A1 - Koetz, Joachim T1 - Poly(ethyleneimine) as reducing and stabilizing agent for the formation of gold nanoparticles in w/o microemulsions JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - This paper is focused on the use of branched poly(ethyleneimine) (PEI) as reducing as well as stabilizing agent for the formation of gold nanoparticles in different media. The process of nanoparticle formation was investigated, in the absence of any other reducing agents, in microemulsion template phase in comparison to the nucleation process in aqueous polymer solution. On the one hand, it was shown that the polyelectrolyte can be used for the controlled single-step synthesis and stabilization of gold nanoparticles via a nucleation reaction and particles with an average diameter of 7.1 nm can be produced. On the other hand, it was demonstrated that the polymer can also act as reducing and stabilizing agent in much more complex systems, i.e. in water-in-oil (w/o) microemulsion droplets. The reverse microemulsion droplets of the quaternary system sodium dodecylsulfate (SDS)/toluene-pentanol (1:1)/water were successfully used for the synthesis of gold nanoparticles. The polymer, incorporated in the droplets, exhibits reducing properties, adsorbs on the surface of the nanoparticles and prevents their aggregation. Consequently, nanoparticles of 8.6 nm can be redispersed after solvent evaporation without a change of their size. Nevertheless, the polymer acts already as a "template" during the formation of the nanoparticles in water and in microemulsion, so that an additional template effect of the microemulsion is not observed. The particle formation for both methods is checked by means of UV-vis spectroscopy and the particle size and size distribution are investigated via dynamic light scattering and transmission electron microscopy (TEM). (c) 2006 Elsevier B.V. All rights reserved. KW - polyelectrolyte KW - microemulsion KW - gold nanoparticles Y1 - 2006 U6 - https://doi.org/10.1016/j.colsurfa.2006.05.018 SN - 0927-7757 VL - 290 IS - 1-3 SP - 150 EP - 156 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Rumschoettel, Jens A1 - Kosmella, Sabine A1 - Prietzel, Claudia Christina A1 - Appelhans, Dietmar A1 - Koetz, Joachim T1 - DNA polyplexes with dendritic glycopolymer-entrapped gold nanoparticles JF - Colloids and surfaces : an international journal devoted to fundamental and applied research on colloid and interfacial phenomena in relation to systems of biological origin ; B, Biointerfaces N2 - Polyplexes, composed of Salmon DNA and very small gold nanoparticles embedded into a dendritic glycopolymer architecture of sugar-modified poly(ethyleneimine) (PEI-Mal) with a molar mass of about 25,000 g/mol, were characterized by dynamic light scattering (DLS), zeta potential measurements, micro differential scanning calorimetry (mu-DSC) and transmission electron microscopy (TEM). The PEI-Mal-entrapped gold nanoparticles of about 2 nm in diameter influence the polyplex formation of the hyperbranched PEI containing bulky maltose, and in consequence the DNA is more compactized in the inner part of spherical polyplex particles of about 150 nm in diameter. The resulting more compact core shell polyplex particles with embedded gold nanoparticles in the outer polymer shell will be used as components in forthcoming gene delivery experiments. (C) 2017 Elsevier B.V. All rights reserved. KW - DNA polyplexes KW - Gold nanoparticles KW - Maltose-modified poly(ethyleneimine) KW - TEM KW - mu-DSC Y1 - 2017 U6 - https://doi.org/10.1016/j.colsurfb.2017.03.001 SN - 0927-7765 SN - 1873-4367 VL - 154 SP - 74 EP - 81 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Sander, Mathias A1 - Koopman, Wouter-Willem Adriaan A1 - Schuetz, Roman A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - Deposition of Gold Nanotriangles in Large Scale Close-Packed Monolayers for X-ray-Based Temperature Calibration and SERS Monitoring of Plasmon-Driven Catalytic Reactions JF - ACS applied materials & interfaces KW - gold nanotriangles KW - monolayer formation KW - SERS KW - dimerization KW - heat measurement Y1 - 2017 U6 - https://doi.org/10.1021/acsami.7b07231 SN - 1944-8244 VL - 9 SP - 20247 EP - 20253 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Bogomolova, Anna A1 - Secker, Christian A1 - Koetz, Joachim A1 - Schlaad, Helmut T1 - Thermo-induced multistep assembly of double-hydrophilic block copolypeptoids in water JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - The aqueous solution behavior of thermoresponsive-hydrophilic block copolypeptoids, i.e., poly(N-(n-propyl)glycine) (x) -block-poly(N-methylglycine) (y) (x = 70; y = 23, 42, 76), in the temperature range of 20-45 A degrees C is studied. Turbidimetric analyses of the 0.1 wt% aqueous solutions reveal two cloud points at T (cp)similar to 30 and 45 A degrees C and a clearing point in between at T (cl)similar to 42 A degrees C. Temperature-dependent dynamic light scattering (DLS) suggest that right above the first collapse temperature, single polymer molecules assemble into large structures which upon further heating, i.e., at the clearing point temperature, disassemble into micelle-like structures. Upon further heating, the aggregates start to grow again in size, as recognized by the second cloud point, through a crystallization process. KW - Polypeptoids KW - Block copolymers KW - Thermoresponsive KW - Self-assembly Y1 - 2017 U6 - https://doi.org/10.1007/s00396-017-4044-6 SN - 0303-402X SN - 1435-1536 VL - 295 SP - 1305 EP - 1312 PB - Springer CY - New York ER - TY - JOUR A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Reinecke, Antje A1 - Koetz, Joachim T1 - "Green" gold nanotriangles: synthesis, purification by polyelectrolyte/micelle depletion flocculation and performance in surface-enhanced Raman scattering JF - RSC Advances N2 - The aim of this study was to develop a one-step synthesis of gold nanotriangles (NTs) in the presence of mixed phospholipid vesicles followed by a separation process to isolate purified NTs. Negatively charged vesicles containing AOT and phospholipids, in the absence and presence of additional reducing agents (polyampholytes, polyanions or low molecular weight compounds), were used as a template phase to form anisotropic gold nanoparticles. Upon addition of the gold chloride solution, the nucleation process is initiated and both types of particles, i.e., isotropic spherical and anisotropic gold nanotriangles, are formed simultaneously. As it was not possible to produce monodisperse nanotriangles with such a one-step procedure, the anisotropic nanoparticles needed to be separated from the spherical ones. Therefore, a new type of separation procedure using combined polyelectrolyte/micelle depletion flocculation was successfully applied. As a result of the different purification steps, a green colored aqueous dispersion was obtained containing highly purified, well-defined negatively charged flat nanocrystals with a platelet thickness of 10 nm and an edge length of about 175 nm. The NTs produce promising results in surface-enhanced Raman scattering. Y1 - 2016 U6 - https://doi.org/10.1039/c6ra04808k SN - 2046-2069 VL - 6 SP - 33561 EP - 33568 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Rumschöttel, Jens A1 - Kosmella, Sabine A1 - Prietzel, Claudia Christina A1 - Appelhans, Dietmar A1 - Koetz, Joachim T1 - Change in size, morphology and stability of DNA polyplexes with hyperbranched poly(ethyleneimines) containing bulky maltose units JF - Colloids and surfaces : an international journal devoted to fundamental and applied research on colloid and interfacial phenomena in relation to systems of biological origin ; B, Biointerfaces N2 - Polyplexes between Salmon DNA and non-modified hyperbranched poly(ethyleneimines) of varying molar mass, i.e., PEI(5 k) with 5000 g/mol and PEI(25 k) with 25,000 g/mol, and modified PEI(5 k) with maltose units (PEI-Mal) were investigated in dependence on the molar N/P ratio by using dynamic light scattering (DLS), zeta potential measurements, micro differential scanning calorimetry (mu-DSC), scanning-transmission electron microscopy (STEM), and cryo-scanning electron microscopy (cryo-SEM). A reloading of the polyplexes can be observed by adding the unmodified PEI samples of different molar mass. In excess of PEI a morphological transition from core-shell particles (at N/P 8) to loosely packed onion-like polyplexes (at N/P 40) is observed. The shift of the DSC melting peak from 88 degrees C to 76 degrees C indicates a destabilization of the DNA double helix due to the complexation with the unmodified PEI. Experiments with the maltose-modified PEI show a reloading already at a lower N/P ratio. Due to the presence of the sugar units in the periphery of the polycation electrostatic interactions between DNA become weaker, but cooperative H-bonding forces are reinforced. The resulting less-toxic, more compact polyplexes in excess of the PEI-Mal with two melting points and well distributed DNA segments are of special interest for extended gene delivery experiments. (C) 2015 Elsevier B.V. All rights reserved. KW - DNA complexation KW - Polyplexes KW - Maltose-modified poly(ethyleneimine) KW - Morphology Y1 - 2016 U6 - https://doi.org/10.1016/j.colsurfb.2015.11.061 SN - 0927-7765 SN - 1873-4367 VL - 138 SP - 78 EP - 85 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Secker, Christian A1 - Voelkel, Antje A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Schlaad, Helmut T1 - Thermo-Induced Aggregation and Crystallization of Block Copolypeptoids in Water JF - Macromolecules : a publication of the American Chemical Society N2 - Block copolypeptoids comprising a thermosensitive, crystallizable poly(N-(n-propyl)glycine) block and a watersoluble poly(N-methylglycine) block, P70My (y = 23, 42, 76, 153, and 290), were synthesized bY ring-opening polymerization of the corresponding N-alkylglycine N-carboxyanhydrides (NCAs) and examined according to their thermo-induced aggregation and crystallization in water by turbidimetty, micro-differential scanning calorimetry (micro-DSC); cryogenic scanning electron microscopy (cryo-SEM), analytical ultracentrifugation (AUC), and static light scattering (SLS). At a temperature above the cloud point temperature, the initially formed micellar aggregates started to crystallize and grow into larger complex assemblies of about 100-500 nm, exhibiting flower-like (P70M23), ellipsoidal (P70M42 and P70M72) or irregular shapes (P70M153 and.P70M290). Y1 - 2016 U6 - https://doi.org/10.1021/acs.macromol.5b02481 SN - 0024-9297 SN - 1520-5835 VL - 49 SP - 979 EP - 985 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Kovach, Ildiko A1 - Won, Jooyoung A1 - Friberg, Stig E. A1 - Koetz, Joachim T1 - Completely engulfed olive/silicone oil Janus emulsions with gelatin and chitosan JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - Janus emulsions, formed by mixing two oil components (i.e., olive oil (OO) and silicone oil (SiO)) with water in the presence of two surface active biopolymers, i.e., gelatin and chitosan, are investigated in more detail. The stability of Janus droplets formed strongly depends on the polymer components used. The mixture of both biopolymers represents an extraordinary effect which can be related to the complex formation of gelatin and chitosan. Taken into account that under the given pH conditions, in the acidic pH range between 4 and 6, below the isoelectric point of gelatin, both polymers are polycations, one can conclude that non-Coulombic interactions are of relevance for the enhanced surface activity of the complexes. Dynamic interfacial tension (gamma) measurements by using the drop profile analysis tensiometry (PAT) indicate a strong adsorption of the polymer complexes at the olive oil/water interface in contrast to the silicone/water interface. In a first step, the polymer complexes are adsorbed at the interface, and in a second step, a more rigid skin-like polymer layer is formed. This first example of a polymer-stabilized Janus emulsion opens new perspectives for the application, e.g., in food emulsions or for making scaffold materials. KW - Janus emulsions KW - Interfacial tension KW - Ring method KW - Drop profile analysis tensiometry KW - Gelatin-chitosan composites Y1 - 2016 U6 - https://doi.org/10.1007/s00396-016-3828-4 SN - 0303-402X SN - 1435-1536 VL - 294 SP - 705 EP - 713 PB - Springer CY - New York ER - TY - JOUR A1 - Couturier, Jean-Philippe A1 - Wischerhoff, Erik A1 - Bernin, Robert A1 - Hettrich, Cornelia A1 - Koetz, Joachim A1 - Sutterlin, Martin A1 - Tiersch, Brigitte A1 - Laschewsky, Andre T1 - Thermoresponsive Polymers and Inverse Opal Hydrogels for the Detection of Diols JF - Langmuir N2 - Responsive inverse opal hydrogels functionalized by boroxole moieties were synthesized and explored as sensor platforms for various low molar mass as well as polymeric diols and polyols, including saccharides, glycopolymers and catechols, by exploiting the diol induced modulation of their structural color. The underlying thermoresponsive water-soluble copolymers and hydrogels exhibit a coil-to-globule or volume phase transition, respectively, of the LCST-type. They were prepared from oligoethylene oxide methacrylate (macro)monomers and functionalized via copolymerization to bear benzoboroxole moieties. The resulting copolymers represent weak polyacids, which can bind specifically to diols within an appropriate pH window. Due to the resulting modulation of the overall hydrophilicity of the systems and the consequent shift of their phase transition temperature, the usefulness of such systems for indicating the presence of catechols, saccharides, and glycopolymers was studied, exploiting the diol/polyol induced shifts of the soluble polymers’ cloud point, or the induced changes of the hydrogels’ swelling. In particular, the increased acidity of benzoboroxoles compared to standard phenylboronic acids allowed performing the studies in PBS buffer (phosphate buffered saline) at the physiologically relevant pH of 7.4. The inverse opals constructed of these thermo- and analyte-responsive hydrogels enabled following the binding of specific diols by the induced shift of the optical stop band. Their highly porous structure enabled the facile and specific optical detection of not only low molar mass but also of high molar mass diol/polyol analytes such as glycopolymers. Accordingly, such thermoresponsive inverse opal systems functionalized with recognition units represent attractive and promising platforms for the facile sensing of even rather big analytes by simple optical means, or even by the bare eye. Y1 - 2016 U6 - https://doi.org/10.1021/acs.langmuir.6b00803 SN - 0743-7463 VL - 32 SP - 4333 EP - 4345 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Vargas-Ruiz, Salome A1 - Schulreich, Christoph A1 - Kostevic, Angelika A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Kakorin, Sergej A1 - von Klitzing, Regine A1 - Jung, Martin A1 - Hellweg, Thomas A1 - Wellert, Stefan T1 - Extraction of model contaminants from solid surfaces by environmentally compatible microemulsions JF - Journal of colloid and interface science N2 - In the present contribution, we evaluate the efficiency of eco-friendly microemulsions to decontaminate solid surfaces by monitoring the extraction of non-toxic simulants of sulfur mustard out of model surfaces. The extraction process of the non-toxic simulants has been monitored by means of spectroscopic and chromatographic techniques. The kinetics of the removal process was analyzed by different empirical models. Based on the analysis of the kinetics, we can assess the influence of the amounts of oil and water and the microemulsion structure on the extraction process. (C) 2016 Elsevier Inc. All rights reserved. KW - Microemulsions KW - Decontamination KW - Surface removal KW - Kinetic analysis KW - Extraction Y1 - 2016 U6 - https://doi.org/10.1016/j.jcis.2016.03.006 SN - 0021-9797 SN - 1095-7103 VL - 471 SP - 118 EP - 126 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Schulze, Nicole A1 - Prietzel, Claudia Christina A1 - Koetz, Joachim T1 - Polyampholyte-mediated synthesis of anisotropic gold nanoplatelets JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - This paper focused on the synthesis of triangular nanoplatelets in the presence of a tubular network structure. The tubular network structure is formed by adding a strongly alternating polyampholyte, i.e., PalPhBisCarb, to a mixed vesicle system with a negatively charged bilayer containing phosphatidylcholin and AOT. Using the tubular network as a reducing agent in a one-step procedure, triangular and hexagonal nanoplatelets are formed. One can show that the nanoplatelet yield is enhanced by increasing the temperature and decreasing the reaction time. The platelet edge length can be decreased by heating the system up to 100 A degrees C. Due to specific interactions between PalPhBisCarb and the AOT/phospholipid bilayer, stacking and welding effects lead to the formation of ordered platelet structures. The reaction pathway to flat gold nanotriangles is discussed with regard to the twin plane growth model of gold nanoplates. KW - Polyampholytes KW - Tubular network structure KW - Anisotropic gold nanoplatelets KW - Nanocrystal growth KW - Nanotriangle stacking and welding Y1 - 2016 U6 - https://doi.org/10.1007/s00396-016-3890-y SN - 0303-402X SN - 1435-1536 VL - 294 SP - 1297 EP - 1304 PB - Springer CY - New York ER - TY - JOUR A1 - Kovach, Ildiko A1 - Rumschöttel, Jens A1 - Friberg, Stig E. A1 - Koetz, Joachim T1 - Janus emulsion mediated porous scaffold bio-fabrication JF - Colloids and surfaces : an international journal devoted to fundamental and applied research on colloid and interfacial phenomena in relation to systems of biological origin ; B, Biointerfaces N2 - A three dimensional biopolymer network structure with incorporated nano-porous calcium phosphate (CaP) balls was fabricated by using gelatin-chitosan (GC) polymer blend and GC stabilized olive/silicone oil Janus emulsions, respectively. The emulsions were freeze-dried, and the oil droplets were washed out in order to prepare porous scaffolds with larger surface area. The morphology, pore size, chemical composition, thermal and swelling behavior was studied by Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR) and micro-Differential Scanning Calorimetry (micro-DSC). Microscopic analysis confirmed that the pore size of the GC based sponges after freeze-drying may be drastically reduced by using Janus emulsions. Besides, the incorporation of nanoporous calcium phosphate balls is also lowering the pore size and enhancing thermal stability. (C) 2016 Elsevier B.V. All rights reserved. KW - Janus emulsions KW - Calcium phosphates KW - Gelatin-chitosan scaffolds Y1 - 2016 U6 - https://doi.org/10.1016/j.colsurfb.2016.05.018 SN - 0927-7765 SN - 1873-4367 VL - 145 SP - 347 EP - 352 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Zeng, Ting A1 - Frasca, Stefano A1 - Rumschöttel, Jens A1 - Koetz, Joachim A1 - Leimkühler, Silke A1 - Wollenberger, Ursula T1 - Role of Conductive Nanoparticles in the Direct Unmediated Bioelectrocatalysis of Immobilized Sulfite Oxidase JF - Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis KW - Direct electron transfer KW - Protein voltammetry KW - Human sulfite oxidase KW - Bioelectrocatalysis KW - Nanoparticles Y1 - 2016 U6 - https://doi.org/10.1002/elan.201600246 SN - 1040-0397 SN - 1521-4109 VL - 28 SP - 2303 EP - 2310 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Arsenyan, Levon H. A1 - Shahinyan, Aram A. A1 - Koetz, Joachim T1 - Polyethyleneimine loaded inverse SDS micelle in pentanol/toluene media JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - An atomic scale molecular dynamics simulation (100 ns) was carried out to reveal the conformational features of a cationic polyelectrolyte, i.e., hyperbranched polyethyleneimine (PEI), inside of water-in-oil microemulsion droplets stabilized by the anionic sodium dodecyl sulfate surfactant (SDS) layer. Simulations show that the polymer reorients very quickly and is localized at the headgroup region, i.e., the polymer nitrogens are close to SDS sulfur atoms. In spite of the availability of surface roughness caused by the polymer, we track a stable inverse micelle during the production run. In overall, the obtained parameters are well compared with experimental findings. (C) 2016 Elsevier B.V. All rights reserved. KW - SDS inverse micelle KW - Polyethyleneimine KW - Molecular dynamics simulations KW - Microemulsions Y1 - 2016 U6 - https://doi.org/10.1016/j.colsurfa.2016.07.018 SN - 0927-7757 SN - 1873-4359 VL - 506 SP - 402 EP - 408 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Liebig, Ferenc A1 - Thünemann, Andreas F. A1 - Koetz, Joachim T1 - Ostwald Ripening Growth Mechanism of Gold Nanotriangles in Vesicular Template Phases JF - Langmuir N2 - The mechanism of nanotriangle formation in multivesicular vesicles (MMV) is investigated by using time-dependent SAXS measurements in combination with UV-vis spectroscopy, light, and transmission electron microscopy. In the first time period 6.5 nm sized spherical gold nanoparticles are formed inside of the vesicles, which build up soft nanoparticle aggregates. a) In situ SAXS experiments show a linear increase of the volume and molar mass of nanotriangles in the second time period. The volume growth rate of the triangles is 16.1 nm(3)/min, and the growth rate in the vertical direction is only 0.02 nm/min. Therefore, flat nanotriangles with a thickness of 7 nm and a diameter of 23 nm are formed. This process can be described by a diffusion limited Ostwald ripening growth mechanism. TEM micrographs visualize soft coral-like structures with thin nanoplatelets at the periphery of the aggregates, which disaggregate in the third time period into nanotriangles and spherical particles. The 16 times faster growth of nanotriangles in the lateral than that in the vertical direction is related to the adsorption of symmetry breaking components, i.e., AOT and the polyampholyte PalPhBisCarb, on the {111} facets of the gold nanoplatelets in combination with confinement effects of the vesicular template phase. Y1 - 2016 U6 - https://doi.org/10.1021/acs.langmuir.6b02662 SN - 0743-7463 VL - 32 SP - 10928 EP - 10935 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Reppert, Alexander von A1 - Sarhan, Radwan Mohamed A1 - Stete, Felix A1 - Pudell, Jan-Etienne A1 - Del Fatti, N. A1 - Crut, A. A1 - Koetz, Joachim A1 - Liebig, Ferenc A1 - Prietzel, Claudia Christina A1 - Bargheer, Matias T1 - Watching the Vibration and Cooling of Ultrathin Gold Nanotriangles by Ultrafast X-ray Diffraction JF - The journal of physical chemistry : C, Nanomaterials and interfaces N2 - We study the vibrations of ultrathin gold nanotriangles upon optical excitation of the electron gas by ultrafast X-ray diffraction. We quantitatively measure the strain evolution in these highly asymmetric nano-objects, providing a direct estimation of the amplitude and phase of the excited vibrational motion. The maximal strain value is well reproduced by calculations addressing pump absorption by the nanotriangles and their resulting thermal expansion. The amplitude and phase of the out-of-plane vibration mode with 3.6 ps period dominating the observed oscillations are related to two distinct excitation mechanisms. Electronic and phonon pressures impose stresses with different time dependences. The nanosecond relaxation of the expansion yields a direct temperature sensing of the nano-object. The presence of a thin organic molecular layer at the nanotriangle/substrate interfaces drastically reduces the thermal conductance to the substrate. Y1 - 2016 U6 - https://doi.org/10.1021/acs.jpcc.6b11651 SN - 1932-7447 VL - 120 SP - 28894 EP - 28899 PB - American Chemical Society CY - Washington ER - TY - GEN A1 - Liebig, Ferenc A1 - Henning, Ricky A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Schmitt, Clemens Nikolaus Zeno A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - A simple one-step procedure to synthesise gold nanostars in concentrated aqueous surfactant solutions T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - Due to the enhanced electromagnetic field at the tips of metal nanoparticles, the spiked structure of gold nanostars (AuNSs) is promising for surface-enhanced Raman scattering (SERS). Therefore, the challenge is the synthesis of well designed particles with sharp tips. The influence of different surfactants, i.e., dioctyl sodium sulfosuccinate (AOT), sodium dodecyl sulfate (SDS), and benzylhexadecyldimethylammonium chloride (BDAC), as well as the combination of surfactant mixtures on the formation of nanostars in the presence of Ag⁺ ions and ascorbic acid was investigated. By varying the amount of BDAC in mixed micelles the core/spike-shell morphology of the resulting AuNSs can be tuned from small cores to large ones with sharp and large spikes. The concomitant red-shift in the absorption toward the NIR region without losing the SERS enhancement enables their use for biological applications and for time-resolved spectroscopic studies of chemical reactions, which require a permanent supply with a fresh and homogeneous solution. HRTEM micrographs and energy-dispersive X-ray (EDX) experiments allow us to verify the mechanism of nanostar formation according to the silver underpotential deposition on the spike surface in combination with micelle adsorption. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 769 KW - optical-properties KW - nanoparticles KW - sers KW - ultrafast KW - size KW - nanotriangles KW - nanoflowers KW - wavelength Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-438743 SN - 1866-8372 IS - 769 SP - 23633 EP - 23641 ER - TY - JOUR A1 - Liebig, Ferenc A1 - Henning, Ricky A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Schmitt, Clemens Nikolaus Zeno A1 - Bargheer, Matias A1 - Koetz, Joachim T1 - A simple one-step procedure to synthesise gold nanostars in concentrated aqueous surfactant solutions JF - RSC Advances N2 - Due to the enhanced electromagnetic field at the tips of metal nanoparticles, the spiked structure of gold nanostars (AuNSs) is promising for surface-enhanced Raman scattering (SERS). Therefore, the challenge is the synthesis of well designed particles with sharp tips. The influence of different surfactants, i.e., dioctyl sodium sulfosuccinate (AOT), sodium dodecyl sulfate (SDS), and benzylhexadecyldimethylammonium chloride (BDAC), as well as the combination of surfactant mixtures on the formation of nanostars in the presence of Ag⁺ ions and ascorbic acid was investigated. By varying the amount of BDAC in mixed micelles the core/spike-shell morphology of the resulting AuNSs can be tuned from small cores to large ones with sharp and large spikes. The concomitant red-shift in the absorption toward the NIR region without losing the SERS enhancement enables their use for biological applications and for time-resolved spectroscopic studies of chemical reactions, which require a permanent supply with a fresh and homogeneous solution. HRTEM micrographs and energy-dispersive X-ray (EDX) experiments allow us to verify the mechanism of nanostar formation according to the silver underpotential deposition on the spike surface in combination with micelle adsorption. KW - optical-properties KW - nanoparticles KW - sers KW - ultrafast KW - size KW - nanotriangles KW - nanoflowers KW - wavelength Y1 - 2019 U6 - https://doi.org/10.1039/C9RA02384D SN - 2046-2069 VL - 9 SP - 23633 EP - 23641 PB - RSC Publishing CY - London ER - TY - GEN A1 - Raju, Rajarshi Roy A1 - Liebig, Ferenc A1 - Hess, Andreas A1 - Schlaad, Helmut A1 - Koetz, Joachim T1 - Temperature-triggered reversible breakdown of polymer-stabilized olive BT - silicone oil Janus emulsions T2 - Postprints der Universität Potsdam Mathematisch-Naturwissenschaftliche Reihe N2 - A one-step moderate energy vibrational emulsification method was successfully employed to produce thermo-responsive olive/silicone-based Janus emulsions stabilized by poly(N,N-diethylacrylamide) carrying 0.7 mol% oleoyl side chains. Completely engulfed emulsion droplets remained stable at room temperature and could be destabilized on demand upon heating to the transition temperature of the polymeric stabilizer. Time-dependent light micrographs demonstrate the temperature-induced breakdown of the Janus droplets, which opens new aspects of application, for instance in biocatalysis. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 751 KW - microgels KW - step Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-436461 SN - 1866-8372 IS - 751 SP - 19271 EP - 19277 ER - TY - JOUR A1 - Raju, Rajarshi Roy A1 - Liebig, Ferenc A1 - Hess, Andreas A1 - Schlaad, Helmut A1 - Koetz, Joachim T1 - Temperature-triggered reversible breakdown of polymer-stabilized olive BT - silicone oil Janus emulsions JF - RSC Advances N2 - A one-step moderate energy vibrational emulsification method was successfully employed to produce thermo-responsive olive/silicone-based Janus emulsions stabilized by poly(N,N-diethylacrylamide) carrying 0.7 mol% oleoyl side chains. Completely engulfed emulsion droplets remained stable at room temperature and could be destabilized on demand upon heating to the transition temperature of the polymeric stabilizer. Time-dependent light micrographs demonstrate the temperature-induced breakdown of the Janus droplets, which opens new aspects of application, for instance in biocatalysis. KW - microgels KW - step Y1 - 2019 U6 - https://doi.org/10.1039/c9ra03463c SN - 2046-2069 VL - 9 IS - 35 SP - 19271 EP - 19277 PB - RSC Publishing CY - London ER - TY - GEN A1 - Liebig, Ferenc A1 - Sarhan, Radwan Mohamed A1 - Prietzel, Claudia Christina A1 - Reinecke, Antje A1 - Koetz, Joachim T1 - “Green” gold nanotriangles: synthesis, purification by polyelectrolyte/micelle depletion flocculation and performance in surface-enhanced Raman scattering N2 - The aim of this study was to develop a one-step synthesis of gold nanotriangles (NTs) in the presence of mixed phospholipid vesicles followed by a separation process to isolate purified NTs. Negatively charged vesicles containing AOT and phospholipids, in the absence and presence of additional reducing agents (polyampholytes, polyanions or low molecular weight compounds), were used as a template phase to form anisotropic gold nanoparticles. Upon addition of the gold chloride solution, the nucleation process is initiated and both types of particles, i.e., isotropic spherical and anisotropic gold nanotriangles, are formed simultaneously. As it was not possible to produce monodisperse nanotriangles with such a one-step procedure, the anisotropic nanoparticles needed to be separated from the spherical ones. Therefore, a new type of separation procedure using combined polyelectrolyte/micelle depletion flocculation was successfully applied. As a result of the different purification steps, a green colored aqueous dispersion was obtained containing highly purified, well-defined negatively charged flat nanocrystals with a platelet thickness of 10 nm and an edge length of about 175 nm. The NTs produce promising results in surface-enhanced Raman scattering. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 317 KW - morphological transformation KW - halide-ions KW - nanoparticles KW - shape KW - size KW - nanoprisms KW - vesicles KW - nanorods KW - silver KW - poly(ethyleneimine) Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-394430 SP - 33561 EP - 33568 ER - TY - JOUR A1 - Beisebekov, Madiar Maratovich A1 - Serikpayeva, Saniya B. A1 - Zhumagalieva, Shynar Nurlanovna A1 - Beisebekov, Marat Kianovich A1 - Abilov, Zharylkasyn Abduachitovich A1 - Kosmella, Sabine A1 - Koetz, Joachim T1 - Interactions of bentonite clay in composite gels of non-ionic polymers with cationic surfactants and heavy metal ions JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - Chemically cross-linked composite gels based on bentonite clay from Manyrak deposit (Kazakhstan Republic) and nonionic polymers, i.e., poly(hydroxyethylacrylate) and poly(acrylamide), were polymerized in situ after preliminary intercalation of monomers in an aqueous suspension of bentonite clay. By means of cryo-scanning electron microscopy, it was shown that bentonite clay is well incorporated into the gel network structure with pore sizes up to 1.5 mu m. The intercalated bentonite clay can adsorb cationic surfactants as well as heavy metal ions due to electrostatic interactions. Conductometric and surface tension measurements indicate not only the adsorption of surfactants and heavy metals inside the hydrogel, but also the displacement of the critical micellization concentration (CMC) of the surfactants. KW - Bentonite clay KW - Cationic surfactants KW - Heavy metal ions KW - Composite hydrogels Y1 - 2015 U6 - https://doi.org/10.1007/s00396-014-3463-x SN - 0303-402X SN - 1435-1536 VL - 293 IS - 2 SP - 633 EP - 639 PB - Springer CY - New York ER - TY - JOUR A1 - Kovach, Ildyko A1 - Kosmella, Sabine A1 - Prietzel, Claudia Christina A1 - Bagdahn, Christian A1 - Koetz, Joachim T1 - Nano-porous calcium phosphate balls JF - Colloids and surfaces : an international journal devoted to fundamental and applied research on colloid and interfacial phenomena in relation to systems of biological origin ; B, Biointerfaces N2 - By dropping a NaH2PO4 center dot H2O precursor solution to a CaCl2 solution at 90 degrees C under continuous stirring in presence of two biopolymers, i.e. gelatin (G) and chitosan (C), supramolecular calcium phosphate (CP) card house structures are formed. Light microscopic investigations in combination with scanning electron microscopy show that the GC-based flower-like structure is constructed from very thin CP platelets. Titration experiments indicate that H-bonding between both biopolymers is responsible for the synergistic effect in presence of both polymers. Gelatin chitosan water complexes play an important role with regard to supramolecular ordering. FTIR spectra in combination with powder X-ray diffraction show that after burning off all organic components (heating up >600 degrees C) dicalcium and tricalcium phosphate crystallites are formed. From high resolution transmission electron microscopy (HR-TEM) it is obvious to conclude, that individual crystal platelets are dicalcium phosphates, which build up ball-like supramolecular structures. The results reveal that the GC guided crystal growth leads to nano-porous supramolecular structures, potentially attractive candidates for bone repair. (c) 2015 Elsevier B.V. All rights reserved. KW - Calcium phosphates KW - Bone repair material KW - Biomineralization KW - Supramolecular ball structure Y1 - 2015 U6 - https://doi.org/10.1016/j.colsurfb.2015.05.021 SN - 0927-7765 SN - 1873-4367 VL - 132 SP - 246 EP - 252 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Arsenyan, Levon H. A1 - Antonyan, Lilit A. A1 - Shahinyan, Aram A. A1 - Koetz, Joachim T1 - Molecular dynamics simulations of branched polyethyleneimine in water-in-heptanol micelles stabilized by zwitterionic surfactants JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - We have performed a 50 ns molecular dynamics simulation of a hyperbranched polymer, i.e. polyethyleneimine (PEI), inside inverse micelles formed with zwitterionic surfactants 3-(N, N-dimethyldodecylammoniio)-propansulfonate (SB) in heptanol. The runs were performed using the GROMACS simulation package. During simulation time the PEI molecule undergoes a conformational deformation and compaction. The radius of gyration of the PEI molecule finally located in the center of the water droplet is decreased from 3 nm to 1.7 nm. The unusual shrinking of the PEI molecule inside the micelle explains the extraordinary template effect of these microemulsions by making cadmium sulfide or gold clusters. (C) 2015 Elsevier B.V. All rights reserved. KW - Surfactant micelles KW - Molecular dynamics simulations KW - Polyethyleneimine Y1 - 2015 U6 - https://doi.org/10.1016/j.colsurfa.2015.03.053 SN - 0927-7757 SN - 1873-4359 VL - 479 SP - 18 EP - 24 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Ermeydan, Mahmut Ali A1 - Cabane, Etienne A1 - Gierlinger, Notburga A1 - Koetz, Joachim A1 - Burgert, Ingo T1 - Improvement of wood material properties via in situ polymerization of styrene into tosylated cell walls JF - RSC Advances N2 - As an engineering material derived from renewable resources, wood possesses excellent mechanical properties in view of its light weight but also has some disadvantages such as low dimensional stability upon moisture changes and low durability against biological attack. Polymerization of hydrophobic monomers in the cell wall is one of the potential approaches to improve the dimensional stability of wood. A major challenge is to insert hydrophobic monomers into the hydrophilic environment of the cell walls, without increasing the bulk density of the material due to lumen filling. Here, we report on an innovative and simple method to insert styrene monomers into tosylated cell walls (i.e. -OH groups from natural wood polymers are reacted with tosyl chloride) and carry out free radical polymerization under relatively mild conditions, generating low wood weight gains. In-depth SEM and confocal Raman microscopy analysis are applied to reveal the distribution of the polystyrene in the cell walls and the lumen. The embedding of polystyrene in wood results in reduced water uptake by the wood cell walls, a significant increase in dimensional stability, as well as slightly improved mechanical properties measured by nanoindentation. Y1 - 2014 U6 - https://doi.org/10.1039/c4ra00741g SN - 2046-2069 VL - 4 IS - 25 SP - 12981 EP - 12988 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Ermeydan, Mahmut Ali A1 - Cabane, Etienne A1 - Hass, Philipp A1 - Koetz, Joachim A1 - Burgert, Ingo T1 - Fully biodegradable modification of wood for improvement of dimensional stability and water absorption properties by poly(epsilon-caprolactone) grafting into the cell walls JF - Green chemistry : an international journal and green chemistry resource N2 - Materials derived from renewable resources are highly desirable in view of more sustainable manufacturing. Among the available natural materials, wood is one of the key candidates, because of its excellent mechanical properties. However, wood and wood-based materials in engineering applications suffer from various restraints, such as dimensional instability upon humidity changes. Several wood modification treatments increase water repellence, but the insertion of hydrophobic polymers can result in a composite material which cannot be considered as renewable anymore. In this study, we report on the grafting of the fully biodegradable poly(epsilon-caprolactone) (PCL) inside the wood cell walls by Sn(Oct)(2) catalysed ring-opening polymerization (ROP). The presence of polyester chains within the wood cell wall structure is monitored by confocal Raman imaging and spectroscopy as well as scanning electron microscopy. Physical tests reveal that the modified wood is more hydrophobic due to the bulking of the cell wall structure with the polyester chains, which results in a novel fully biodegradable wood material with improved dimensional stability. Y1 - 2014 U6 - https://doi.org/10.1039/c4gc00194j SN - 1463-9262 SN - 1463-9270 VL - 16 IS - 6 SP - 3313 EP - 3321 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Kovach, Ildyko A1 - Koetz, Joachim A1 - Friberg, Stig E. T1 - Janus emulsions stabilized by phospholipids JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - Janus emulsions were formed by mixing three immiscible liquids; this implies two oil components (i.e. olive oil (00) and silicone oil (SiO)) with water in presence of interfacial active components. The morphology and size of Janus droplets formed strongly depended on the type of surfactant used. In presence of a non-ionic surfactant, i.e. Tween 80, large engulfed Janus droplets were formed. By adding phospholipids to the system the droplet size was decreased and more stable Janus droplets formed. Interfacial tension measurements carried out using a spinning drop apparatus and a ring tensiometer demonstrate that interfacial tension is the most important factor controlling the size, morphology and stability of Janus droplets. When the interfacial tension between oil and water becomes <= 1 mN/m, smaller Janus droplets are formed. Such conditions are fulfilled when phospholipids are used in combination with non-ionic surfactant Tween 80. The morphology of the double droplets is predominantly controlled by the viscosity and interfacial tension between the two oil phases. By using different types of phospholipids, i.e. asolectin and lecithin instead of a more concentrated phosphatidylcholine (phospholipon), the interfacial tension is decreased and different morphologies of engulfing can be observed. KW - Janus emulsions KW - Spinning drop KW - Interfacial tension KW - Phospholipids Y1 - 2014 U6 - https://doi.org/10.1016/j.colsurfa.2013.08.065 SN - 0927-7757 SN - 1873-4359 VL - 441 SP - 66 EP - 71 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Kosmella, Sabine A1 - Venus, Jane A1 - Hahn, Jennifer A1 - Prietzel, Claudia Christina A1 - Koetz, Joachim T1 - Low-temperature synthesis of polyethyleneimine-entrapped CdS quantum dots JF - Chemical physics letters N2 - This Letter is focused on the one-pot formation of CdS nanoparticles in aqueous medium in presence of polyethyleneimine (PEI). Quantum dots can be obtained by adding a pre-cooled aqueous Na2S solution to a pre-cooled aqueous CdCl2 solution dropwise in presence of PEI. Field flow fractionation in combination with TEM experiments show a time dependent agglomeration of individual quantum dots from 1.6 nm up to 3.2 nm in size. The hyperbranched PEI of moderate molar mass (>20000 g/mol) is an excellent polymer to prevent a further increase of the particle size. Therefore, stable fluorescent PEI-capped CdS quantum dots are available. Y1 - 2014 U6 - https://doi.org/10.1016/j.cplett.2013.12.019 SN - 0009-2614 SN - 1873-4448 VL - 592 SP - 114 EP - 119 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Hasinovic, Hida A1 - Boggs, Cami A1 - Friberg, Stig E. A1 - Kovach, Ildiko A1 - Koetz, Joachim T1 - Janus emulsions from a one-step process; optical microscopy images JF - Journal of dispersion science and technology N2 - The optical microscopy images of an emulsion are commonly distorted when viewed between a cover glass and a planar microscopy slide. An alternative method is to place the sample on a slide with a cavity, which in turn suffers from incomplete information for high internal phase ratio (HIPR) emulsions, due to the inevitable crowding of the drops. This problem is particularly acute for more complex emulsions, such as those with Janus drops, for which a detailed image of the drop is essential. A number of publications have recently described Janus emulsions prepared by a one-step high energy emulsification process with microscopy images obtained by the sample between a planar slide and a cover glass. The correlation to the morphology of emulsions in bulk of these images is critical, but, so far, a potential equivalence has not been established. Since the images are central in order to understand why Janus emulsions should form under such conditions, the need to ascertain any such association is urgent. With this contribution, we compare images from different microscopy methods to those of gently diluted HIPR emulsions. The results reveal that the images of the emulsion samples between a cover glass and a planar microscope slide actually present a realistic representation of the drop topology in bulk emulsions. KW - Janus drops KW - Emulsification KW - microemulsions KW - emulsion microscopy Y1 - 2014 U6 - https://doi.org/10.1080/01932691.2013.801019 SN - 0193-2691 SN - 1532-2351 VL - 35 IS - 5 SP - 613 EP - 618 PB - Taylor & Francis Group CY - Philadelphia ER - TY - JOUR A1 - Hasinovic, H. A1 - Friberg, S. E. A1 - Kovach, Ildyko A1 - Koetz, Joachim T1 - Destabilization of a dual emulsion to form a Janus emulsion JF - Colloid and polymer science : official journal of the Kolloid-Gesellschaft N2 - A vegetable oil (VO) was added to an emulsion of silicone oil in water (SO/W) with mixing limited to once turning the test tube upside down. Initially, the VO was dispersed into virtually centimeter-sized drops and the emulsion contained effectively no Janus drops, while after 1 h of agitation at a low level to prevent creaming, drops of 50-100-mu m size of the two oils were observed: in addition to an insignificant number of Janus drops. The topology of the latter showed them to emanate from flocculated individual drops of the two oils, but with no discernible effect by the interfacial tension equilibrium on the drop topology. Continued gentle mixing gave increasing fraction of Janus drops of increased size with a topology gradually approaching the one expected from the interfacial equilibrium at the contact line. The spontaneous formation of Janus drops indicated a reduction of the interfacial free energy in the process and the interfacial energy difference between separate and Janus drops was calculated for an appropriate range of interfacial tensions and for all oil fractions. The calculations enabled a distinction of the decrease due to interfacial area changes from the reduction of interfacial tensions per se, with the latter only a minor fraction. KW - Emulsion destabilization KW - Janus emulsions KW - Interfacial equilibrium KW - Microfluidics Y1 - 2014 U6 - https://doi.org/10.1007/s00396-014-3263-3 SN - 0303-402X SN - 1435-1536 VL - 292 IS - 9 SP - 2319 EP - 2324 PB - Springer CY - New York ER - TY - JOUR A1 - Schulze, Nicole A1 - Appelhans, D. A1 - Tiersch, Brigitte A1 - Koetz, Joachim T1 - Morphological transformation of vesicles into tubular structures by adding polyampholytes or dendritic glycopolymers JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - For the first time tubulating properties of spherical dendritic glycopolymers and linear alternating polyampholytes against non-uniform negatively charged giant vesicles are proven by light microscopy and cryo-scanning electron microscopy study. Real time observation of the morphological transformation from giant vesicles to tubular structures, simulating morphogenesis in living cells, is given by using the cationic and H-bond active dendritic glycopolymer accompanied by reducing the size of the giant vesicles and the evidence of vesicle-vesicle interaction which was only postulated in a previous study. Similar morphogenesis of non-uniform giant vesicles into tubular network structure can be observed by using a polyampholyte in the stretched conformation at pH 9. Pearl necklace and tubular network structure formation are also observed by applying anionic vesicles of significant smaller dimensions with average size dimensions of 35 nm, after adding the polyampholyte at pH 9. However, the fitting accuracy between the functional groups along the backbone chain of the polyampholyte on one side and the vesicle surface on the other side is of high importance for the transformation process by using polyampholytes. The resulting tubular and network structures offer new fields of application as microfluidic transport channels or template phases for the shape controlled formation of nanoparticles. (C) 2014 Elsevier B.V. All rights reserved. KW - Alternating polyampholytes KW - Maltose-modified PEI KW - Network structure KW - Template phase KW - Cryo-SEM KW - DLS Y1 - 2014 U6 - https://doi.org/10.1016/j.colsurfa.2014.06.007 SN - 0927-7757 SN - 1873-4359 VL - 457 SP - 326 EP - 332 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Bressel, Katharina A1 - Prevost, Sylvain A1 - Appavou, Marie-Sousai A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Gradzielski, Michael T1 - Phase behaviour and structure of zwitanionic mixtures of perfluorocarboxylates and tetradecyldimethylamine oxide-dependence on chain length of the perfluoro surfactant JF - Soft matter N2 - Phase behaviour and the mesoscopic structure of zwitanionic surfactant mixtures based on the zwitterionic tetradecyldimethylamine oxide (TDMAO) and anionic lithium perfluoroalkyl carboxylates have been investigated for various chain lengths of the perfluoro surfactant with an emphasis on spontaneously forming vesicles. These mixtures were studied at a constant total concentration of 50 mM and characterised by means of dynamic light scattering (DLS), electric conductivity, small-angle neutron scattering (SANS), viscosity, and cryo-scanning electron microscopy (Cryo-SEM). No vesicles are formed for relatively short perfluoro surfactants. The extension of the vesicle phase becomes substantially larger with increasing chain length of the perfluoro surfactant, while at the same time the size of these vesicles increases. Head group interactions in these systems play a central role in the ability to form vesicles, as already protonating 10 mol% of the TDMAO largely enhances the propensity for vesicle formation. The range of vesicle formation in the phase diagram is not only substantially enlarged but also extends to shorter perfluoro surfactants, where without protonation no vesicles would be formed. The size and polydispersity of the vesicles are related to the chain length of the perfluoro surfactant, the vesicles becoming smaller and more monodisperse with increasing perfluoro surfactant chain length. The ability of the mixed systems to form well-defined unilamellar vesicles accordingly can be controlled by the length of the alkyl chain of the perfluorinated surfactant and depends strongly on the charge conditions, which can be tuned easily by pH-variation. Y1 - 2011 U6 - https://doi.org/10.1039/c1sm05618b SN - 1744-683X VL - 7 IS - 23 SP - 11232 EP - 11242 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Koeth, Anja A1 - Appelhans, Dietmar A1 - Robertson, Daniela A1 - Tiersch, Brigitte A1 - Koetz, Joachim T1 - Use of weakly cationic dendritic glycopolymer for morphological transformation of phospholipid vesicles into tube-like networks JF - Soft matter N2 - Using cationic polyelectrolytes with different molecular architectures, only hyperbranched poly(ethyleneimine) with maltose shell is suited to tailor the morphological transformation of anionic vesicles into tube-like networks. The interaction features of those materials partly mimic biological features of tubular proteins in nature. Y1 - 2011 U6 - https://doi.org/10.1039/c1sm06439h SN - 1744-683X VL - 7 IS - 22 SP - 10581 EP - 10584 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Fechner, Mabya A1 - Koetz, Joachim T1 - Polyampholyte-Surfactant film tuning in reverse microemulsions JF - Langmuir N2 - The pH-dependent influence of two different strongly alternating copolymers [poly(N,N'-diallyl-N,N'-dimethylammonium-alt-N-phenylmaleamic carboxylate) (PalPh) and poly(N,N'-diallyl-N,a-dimethylammonium-alt-3,5-bis(carboxyphenyl) maleamic carboxylate) (PalPhBisCarb)] based on N,N'-diallyl-N, -dimethylarnmonium chloride and maleamic acid derivatives on the phase behavior of a water-in-oil (w/o) microemulsion system made from toluene pentanol (1:1) and sodium dodecyl sulfate was investigated. It was shown that the optically dear phase range can be extended after incorporation of these copolymers, leading to an increased water solubilization capacity. Additionally, the required amount of surfactant to establish a clear w/o microemulsion depends on the pH value, which means the hydrophobicity of the copolymers. Conductivity measurements show that droplet droplet interactions in the w/o microemulsion are decreased at acidic but increased at alkaline pH in the presence of the copolymers. From differenctial scanning calorimetry measurements one can further conclude that these results are in agreement with a change of the position of the copolymer in the interfacial region of the surfactant film. The more hydrophobic PalPh can be directly incorporated into the surfactant film, whereas the phenyl groups of PalPhBisCarb flip into the water core by increasing the pH value. Y1 - 2011 U6 - https://doi.org/10.1021/la200791k SN - 0743-7463 VL - 27 IS - 9 SP - 5316 EP - 5323 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Arsenyan, Levon H. A1 - Gharabekyan, Hrant H. A1 - Falkenhagen, Sandra A1 - Koetz, Joachim A1 - Shahinyan, Aram A. T1 - Molecular dynamics simulations of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of poly(diallyldimethylammonium chloride) (PDADMAC) JF - Journal of colloid and interface science N2 - We have performed a 15 ns molecular dynamics simulation of inverse sodium dodecyl sulfate (SDS) micelles in a mixed toluene/pentanol solvent in the absence and presence of a cationic polyelectrolyte, i.e. poly(diallyldimethylammonium chloride) (PDADMAC). The NAMD code and CHARMM force field were used. During the simulation time, the radii of SOS inverse micelles changed and the radii of the water droplets have been calculated. The behavior of SDS hydrocarbon chains has been characterized by calculating the orientation order parameter and the chain average length. The water droplet properties (water flow, water molecules displacement) have been examined. In summary the MD simulations indicate a more rigid and ordered surfactant film due to the formation of a polyelectrolyte palisade layer in full agreement with the experimental findings, e.g. the viscosity increase and shift of the percolation boundary. KW - Surfactant micelles KW - Molecular dynamics simulations KW - SDS Y1 - 2011 U6 - https://doi.org/10.1016/j.jcis.2011.01.091 SN - 0021-9797 VL - 358 IS - 1 SP - 175 EP - 181 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Wellert, Stefan A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Richardt, Andre A1 - Lapp, Alain A1 - Holderer, Olaf A1 - Gaeb, Juergen A1 - Blum, Marc-Michael A1 - Schulreich, Christoph A1 - Stehle, Ralf A1 - Hellweg, Thomas T1 - The DFPase from Loligo vulgaris in sugar surfactant-based bicontinuous microemulsions structure, dynamics, and enzyme activity JF - European biophysics journal : with biophysics letters ; an international journal of biophysics N2 - The enzyme diisopropyl fluorophosphatase (DFPase) from the squid Loligo vulgaris is of great interest because of its ability to catalyze the hydrolysis of highly toxic organophosphates. In this work, the enzyme structure in solution (native state) was studied by use of different scattering methods. The results are compared with those from hydrodynamic model calculations based on the DFPase crystal structure. Bicontinuous microemulsions made of sugar surfactants are discussed as host systems for the DFPase. The microemulsion remains stable in the presence of the enzyme, which is shown by means of scattering experiments. Moreover, activity assays reveal that the DFPase still has high activity in this complex reaction medium. To complement the scattering experiments cryo-SEM was also employed to study the microemulsion structure. KW - Dynamic light scattering KW - Neutron spin echo KW - Microemulsion KW - Enzyme catalysis KW - SANS KW - Protein structure Y1 - 2011 U6 - https://doi.org/10.1007/s00249-011-0689-0 SN - 0175-7571 VL - 40 IS - 6 SP - 761 EP - 774 PB - Springer CY - New York ER - TY - JOUR A1 - Fechner, Mabya A1 - Koetz, Joachim T1 - Potentiometric behavior of Polyampholytes based on N,N'-diallyl-N,N'-dimethylammonium chloride and maleamic acid derivatives JF - Macromolecular chemistry and physics N2 - Strongly alternating copolymers (PalH, PalPh, PalPhBisCarb) composed of N,N'-diallyl-N,N'-dimethyl-ammonium chloride (DADMAC) and maleamic acid derivatives (MAD) are synthesized by a water-based free radical copolymerization using 4,4-azobis(4-cyanovaleric acid) (V501) as the initiator. The structure of the copolymers is verified by 1H-NMR, elemental analysis, and thermogravimetric measurements, and the physicochemical properties are investigated by viscometric and potentiometric techniques. Potentiometric titration curves show that the acidity of the carboxylic groups strongly depends on the degree of dissociation and the ionic strength. Since all copolymers behave as polycations at low degree of dissociation, a transition from an extended chain to a coil conformation can be identified by reaching the isoelectric point (IEP). KW - acidity constants KW - radical polymerization KW - polyampholytes KW - viscosity KW - conformational transitions Y1 - 2011 U6 - https://doi.org/10.1002/macp.201100532 SN - 1022-1352 VL - 212 IS - 24 SP - 2691 EP - 2699 PB - Wiley-Blackwell CY - Malden ER - TY - JOUR A1 - Koeth, Anja A1 - Tiersch, Brigitte A1 - Appelhans, Dietmar A1 - Gradzielski, Michael A1 - Cölfen, Helmut A1 - Koetz, Joachim T1 - Synthesis of Core-Shell Gold Nanoparticles with Maltose-Modified Poly(Ethyleneimine) JF - Journal of dispersion science and technology N2 - The synthesis of ultrafine gold nanoparticles in presence of maltose-modified hyperbranched poly(ethyleneimines) (PEI) is described. The polymer acted as both a reducing and stabilising agent in the particle formation process. The nanoparticles were characterized by means of dynamic light scattering (DLS), transmission electron microscopy (TEM), analytical ultracentrifugation (AUC), small-angle x-ray scattering (SAXS), and small-angle neutron scattering (SANS). The mechanism of nanoparticle formation can be described in two steps. The reduction process of the Au3+ ions located in the inner coil region of the hyperbranched PEI led to the formation of a compact gold core, and is accompanied by a collapse of the polymer coil. Therefore, in the subsequent reduction process a gold-polymer hybrid shell is formed. By using the PEI of higher molar mass, core-shell gold nanoparticles of about 3.6 nm size with a more narrow size distribution and special fluorescence behavior could be synthesized. KW - Gold nanoparticles KW - gold-polymer hybrid shell KW - maltose-modified poly(ethyleneimine) Y1 - 2012 U6 - https://doi.org/10.1080/01932691.2010.530084 SN - 0193-2691 VL - 33 IS - 1-3 SP - 52 EP - 60 PB - Taylor & Francis Group CY - Philadelphia ER - TY - JOUR A1 - Razzaq, Muhammad Yasar A1 - Behl, Marc A1 - Frank, Ute A1 - Koetz, Joachim A1 - Szczerba, Wojciech A1 - Lendlein, Andreas T1 - Oligo(omega-pentadecalactone) decorated magnetic nanoparticles JF - Journal of materials chemistry N2 - Hybrid magnetic nanoparticles (mgNP) with a magnetite core diameter of 10 +/- 1 nm surface functionalized with oligo(omega-pentadecalactone) (OPDL) oligomers with M-n between 1300 and 3300 g mol(-1) could be successfully prepared having OPDL grafted from 200 mg g(-1) to 2170 mg g(-1). The particles are dispersible in chloroform resulting in stable suspensions. Magnetic response against an external magnetic field proved the superparamagnetic nature of the particles with a low coercivity (B-c) value of 297 mu T. The combination of the advantageous superparamagnetism of the mgNP with the exceptional stability of OPDL makes these novel hybrid mgNP promising candidates as multifunctional building blocks for magnetic nanocomposites with tunable physical properties. Y1 - 2012 U6 - https://doi.org/10.1039/c2jm16146j SN - 0959-9428 VL - 22 IS - 18 SP - 9237 EP - 9243 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Lemke, Karina A1 - Koetz, Joachim T1 - Polycation-capped CdS quantum dots synthesized in reverse microemulsions JF - Journal of nanomaterials N2 - This paper is focused on the formation and recovery of cadmium sulfide (CdS) nanoparticles in two different types of polycation-modified reverse microemulsions using low molecular weight poly(diallyldimethylammonium chloride) (PDADMAC) and poly(ethyleneimine) (PEI). Both polymers were incorporated in a quaternary w/o microemulsion consisting of water, toluene-pentanol (1 : 1), and sodium dodecyl sulfate (SDS), as well as in a ternary w/o microemulsion consisting of water, heptanol, and 3( N,N-dimethyl-dodecylammonio)-propanesulfonate (SB). UV-vis and fluorescence measurements in the microemulsion illustrate the capping effect of the polycations on the formation of the CdS quantum dots. The nanoparticles are redispersed in water and characterized by using UV-vis and fluorescence spectroscopy, in combination with dynamic light scattering. From the quaternary microemulsion, only nanoparticle aggregates of about 100 nm can be redispersed, but, from the ternary microemulsion, well-stabilized polycation-capped CdS quantum dots can be obtained. The results show that the electrostatic interactions between the polycation and the surfactant are of high relevance especially in the solvent evaporation and redispersion process. That means only that in the case of moderate polycation-surfactant interactions a redispersion of the polymer-capped CdS quantum dots without problems of aggregation is possible. Y1 - 2012 U6 - https://doi.org/10.1155/2012/478153 SN - 1687-4110 IS - 4 PB - Hindawi Publishing Corp. CY - New York ER - TY - JOUR A1 - Wöhl-Bruhn, Stefanie A1 - Badar, Muhammad A1 - Bertz, Andreas A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Menzel, Henning A1 - Müller, Peter P. A1 - Bunjes, Heike T1 - Comparison of in vitro and in vivo protein release from hydrogel systems JF - Journal of controlled release N2 - Hydrogel systems based on hydroxyethyl starch-polyethylene glycol methacrylate (HES-P(EG)(6)MA) or hydroxyethyl starch methacrylate (HES-MA) were used to assess the protein release behavior. Here, we analyzed the in vitro release of FITC-anti-human antibodies incorporated in either HES-P(EG)(6)MA or HES-MA hydrogel delivery systems in PBS or human serum. In addition, hydrogel disks and microparticles prepared from the two polymers were subcutaneously implanted in BALB/c mice. The in vivo release of FITC-IgG was non-invasively monitored by an in vivo imaging system (IVIS 200) over a time period of up to 3 months. The imaging system allowed to asses individual animals over time, therefore only a small number of animals was required to obtain high quality data. The reduction in fluorescence intensity at the site of administration was compared to in vitro release profiles. These investigations demonstrated a sustained release from HES-MA hydrogel disks compared to rapidly degrading HES-P(EG)(6)MA disks and microparticles. The sustained release from HES-MA disks could be further optimized by using increased polymer concentrations. Human serum as in vitro release medium reflected better the in vivo release from HES-P(EG)(6)MA systems than PBS, suggesting that the presence of organic substances like proteins or lipids may play a significant role for the release kinetics. KW - In vivo imaging system (IVIS) KW - Hydrogel disks KW - Hydrogel microparticles KW - Release KW - In vivo-in vitro correlation KW - Hydroxyethyl starch (HES) Y1 - 2012 U6 - https://doi.org/10.1016/j.jconrel.2012.05.049 SN - 0168-3659 VL - 162 IS - 1 SP - 127 EP - 133 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Kosmella, Sabine A1 - Koetz, Joachim T1 - Polymer-modified w/o microemulsions - with tunable droplet-droplet interactions JF - Current opinion in colloid & interface science : current chemistry N2 - Water soluble polymers can be incorporated into reverse microemulsion droplets without leaving the isotropic phase region. When the polymer is attached to the surfactant film the bending elasticity is changed, and droplet-droplet interactions are influenced. Different methods are available for studying the droplet-droplet interactions in more detail, e.g. SANS. SAXS and DLS. Conductometric measurements are very useful for detecting exchange processes between the droplets. In presence of polyampholytes a pH dependent tuning of the membrane properties becomes possible, experimentally detectable by conductometry. KW - Reverse microemulsions KW - droplet-droplet interactions KW - film tuning KW - polymer-modification Y1 - 2012 U6 - https://doi.org/10.1016/j.cocis.2012.06.004 SN - 1359-0294 VL - 17 IS - 5 SP - 261 EP - 265 PB - Elsevier CY - London ER - TY - JOUR A1 - Koeth, Anja A1 - Appelhans, Dietmar A1 - Prietzel, Claudia Christina A1 - Koetz, Joachim T1 - Asymmetric gold nanoparticles synthesized in the presence of maltose-modified poly(ethyleneimine) JF - Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects N2 - A self-assembled tube-like network, spontaneously formed by adding maltose-modified poly(ethyleneimine) (mal-PEI5000) to mixed phospholipid vesicles, can be used as a template for the formation of gold nanoparticles. High resolution TEM indicates that the growing process leads not only to the formation of spherical gold nanoparticles with an absorption maximum at 520 nm, but also very flat triangles, hexagons, and long bent rods are formed, revealing an absorption maximum in the NIR at about 850 nm. One can conclude that nanorods, nanotriangles and nanohexagons are predominantly formed in the tubular network structure. KW - Gold triangles KW - Hexagons and nanorods KW - Tube-like template phase KW - Maltose-modified PEI Y1 - 2012 U6 - https://doi.org/10.1016/j.colsurfa.2012.08.004 SN - 0927-7757 VL - 414 IS - 21 SP - 50 EP - 56 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Thete, Aniket A1 - Rojas, Oscar A1 - Neumeyer, David A1 - Koetz, Joachim A1 - Dujardin, Erik T1 - Ionic liquid-assisted morphosynthesis of gold nanorods using polyethyleneimine-capped seeds JF - RSC Advances N2 - Seed-mediated gold nanorods with tunable lengths are prepared using new polyethyleneimine-capped gold nanoparticles synthesized in ionic liquid. The effect of polyethyleneimine and ionic liquid during nanorod growth is investigated and shows a marked effect on their final aspect ratio. Y1 - 2013 U6 - https://doi.org/10.1039/c3ra22112a SN - 2046-2069 VL - 3 IS - 34 SP - 14294 EP - 14298 PB - Royal Society of Chemistry CY - Cambridge ER - TY - JOUR A1 - Bertz, Andreas A1 - Wöhl-Bruhn, Stefanie A1 - Miethe, Sebastian A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Hust, Michael A1 - Bunjes, Heike A1 - Menzel, Henning T1 - Encapsulation of proteins in hydrogel carrier systems for controlled drug delivery influence of network structure and drug size on release rate JF - Journal of biotechnology N2 - Novel hydrogels based on hydroxyethyl starch modified with polyethylene glycol methacrylate (HES-P(EG)(6)MA) were developed as delivery system for the controlled release of proteins. Since the drug release behavior is supposed to be related to the pore structure of the hydrogel network the pore sizes were determined by cryo-SEM, which is a mild technique for imaging on a nanometer scale. The results showed a decreasing pore size and an increase in pore homogeneity with increasing polymer concentration. Furthermore, the mesh sizes of the hydrogels were calculated based on swelling data. Pore and mesh size were significantly different which indicates that both structures are present in the hydrogel. The resulting structural model was correlated with release data for bulk hydrogel cylinders loaded with FITC-dextran and hydrogel microspheres loaded with FITC-IgG and FITC-dextran of different molecular size. The initial release depended much on the relation between hydrodynamic diameter and pore size while the long term release of the incorporated substances was predominantly controlled by degradation of the network of the much smaller meshes. KW - Hydrogel KW - Hydrogel microspheres KW - Network structure KW - Release studies KW - Protein delivery KW - Mesh size Y1 - 2013 U6 - https://doi.org/10.1016/j.jbiotec.2012.06.036 SN - 0168-1656 VL - 163 IS - 2 SP - 243 EP - 249 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Lemke, Karina A1 - Prietzel, Claudia Christina A1 - Koetz, Joachim T1 - Fluorescent gold clusters synthesized in a poly(ethyleneimine) modified reverse microemulsion JF - Journal of colloid and interface science N2 - This paper is focused on the formation of gold clusters in a tailor-made polyelectrolyte-modified reverse microemulsion using poly(ethyleneimine) (PEI) as a cationic polyelectrolyte. PEI incorporated into a ternary w/o microemulsion consisting of water/heptanol/zwitterionic surfactant 3-(N,N-dimethyl-dodecylammonio)-propanesulfonate (SB) acts as a reducing and stabilizing agent and shows an additional template effect. The nanoparticle synthesis is performed by a simple mixing of two microemulsions, one containing the PEI and the other one containing the gold chloride precursor. UV-vis measurements in the microemulsion show two pronounced absorption maxima, one at 360 nm and the other one at 520 nm, indicating two particle fractions. The absorption maximum at 360 nm in combination to the unique fluorescence properties indicate the formation of gold clusters. After a complete solvent evaporation the redispersed nanoparticles have been characterized by using UV-vis and fluorescence spectroscopy, in combination to dynamic light scattering and transmission electron microscopy (TEM). In addition to the gold nanoparticle fraction (>5 nm) the fluorescent gold cluster fraction (<2 nm) can be redispersed without particle aggregation. By means of asymmetric flow field flow fractionation (AF-FFF) two different cluster fractions with particle diameter (<2 nm) can be identified. KW - Microemulsion KW - Gold cluster KW - Field flow fractionation KW - Polymer capped gold nanoparticles Y1 - 2013 U6 - https://doi.org/10.1016/j.jcis.2012.11.057 SN - 0021-9797 VL - 394 SP - 141 EP - 146 PB - Elsevier CY - San Diego ER - TY - JOUR A1 - Dolya, Natalya A1 - Rojas, Oscar A1 - Kosmella, Sabine A1 - Tiersch, Brigitte A1 - Koetz, Joachim A1 - Kudaibergenov, Sarkyt T1 - "One-Pot" in situ frmation of Gold Nanoparticles within Poly(acrylamide) Hydrogels JF - Macromolecular chemistry and physics N2 - This paper focuses on two different strategies to incorporate gold nanoparticles (AuNPs) into the matrix of polyacrylamide (PAAm) hydrogels. Poly(ethyleneimine) (PEI) is used as both reducing and stabilizing agent for the formation of AuNPs. In addition, the influence of an ionic liquid (IL) (i.e., 1-ethyl-3-methylimidazolium ethylsulfate) on the stability of the nanoparticles and their immobilization in the hydrogel is investigated The results show that AuNPs surrounded by a shell containing PEI and IL, synthesized according to the one-pot approach, are much better immobilized within the PAAm hydrogel. Hereby, the IL is responsible for structural changes in the hydrogel as well as the improved stabilization and embedding of the AuNPs into the polymer gel matrix. KW - gold nanoparticles KW - immobilization KW - ionic liquids KW - poly(acrylamide) hydrogels Y1 - 2013 U6 - https://doi.org/10.1002/macp.201200727 SN - 1022-1352 VL - 214 IS - 10 SP - 1114 EP - 1121 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Rojas, Oscar A1 - Tiersch, Brigitte A1 - Rabe, Christian A1 - Stehle, Ralf A1 - Hoell, Armin A1 - Arlt, Bastian A1 - Koetz, Joachim T1 - Nonaqueous Microemulsions Based on N,N '-Alkylimidazolium Alkylsulfate Ionic Liquids JF - Langmuir N2 - The ternary system composed of the ionic liquid surfactant (IL-S) 1-butyl-3-methylimidazolium dodecylsulfate ([Bmim][DodSO(4)]), the room temperature ionic liquid (RTIL) 1-ethyl-3-methylimidazolium ethylsulfate ([Emim][EtSO4]), and toluene has been investigated. Three major mechanisms guiding the structure of the isotropic phase were identified by means of conductometric experiments, which have been correlated to the presence of oil-in-IL, bicontinuous, and IL-in-oil microemulsions. IL-S forms micelles in toluene, which swell by adding RTIL as to be shown by dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS) experiments. Therefore, it is possible to form water free IL-in-oil reverse microemulsions <= 10 nm in size as a new type of nanoreactor. Y1 - 2013 U6 - https://doi.org/10.1021/la401080q SN - 0743-7463 VL - 29 IS - 23 SP - 6833 EP - 6839 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Fechner, Mabya A1 - Koetz, Joachim T1 - Polyampholyte/Surfactant complexes at the water-air interface a surface tension study JF - Langmuir N2 - The present paper is related to interactions between strongly alternating polyampholytes, i.e., copolymers of N,N'-diallyl-N,N'-dimethylammonium chloride and maleamic acid derivatives, varying in hydrophobicity and excess charges and the oppositely charged anionic surfactant sodium dodecyl sulfate (SDS). Surface tension measurements have revealed a complex behavior with the formation of polyampholyte-SDS complexes at water air interfaces which depends on both the hydrophobic character of the polyampholyte and electrostatic attractive forces between the polyampholyte and the anionic surfactant in dependence on pH. Hereby, maleamic acid copolymers with additional carboxylic groups in the phenylic side chain show a significant lower surface tension at the critical association concentration (CAC) due to the formation of surface-active SDS complexes and multicomplexes. In the presence of only one carboxylic group in the p-position the CAC can be strongly shifted by varying the pH due to repulsive electrostatic interactions. Y1 - 2013 U6 - https://doi.org/10.1021/la401576q SN - 0743-7463 SN - 1520-5827 VL - 29 IS - 25 SP - 7600 EP - 7606 PB - American Chemical Society CY - Washington ER - TY - JOUR A1 - Friberg, Stig E. A1 - Kovach, Ildiko A1 - Koetz, Joachim T1 - Equilibrium topology and partial inversion of Janus Drops - a numerical analysis JF - ChemPhysChem : a European journal of chemical physics and physical chemistry N2 - The equilibrium topology of an aqueous Janus emulsion of two oils, O1 and O2, with water, W, [(O1+O2)/W], is numerically evaluated with the following realistic interfacial tensions (): (O2/W)=5 mNm(-1), (O1/O2)=1 mNm(-1), and (O1/W) varies within the range 4-5 mNm(-1), which is the limiting range for stable Janus drop topology. The relative significance of the two independently pivotal factors for the topology is evaluated, that is, the local equilibrium at the line of contact between the three liquids and the volume fraction of the two dispersed liquids within the drop. The results reveal a dominant effect of the local equilibrium on the fraction of the O2 drop surface that is covered by O1. In contrast, for a constant volume of O2, the impact of the interfacial tension balance on the limit of the coverage is modest for an infinite volume of O1. Interestingly, when the O1 volume exceeds this value, an emulsion inversion occurs, and the O1 portion of the (O1+O2)/W topology becomes a continuous phase, generating a (W+O2)/O1 Janus configuration. KW - emulsion inversion KW - interfaces KW - janus emulsions KW - liquids KW - semiempirical calculations Y1 - 2013 U6 - https://doi.org/10.1002/cphc.201300635 SN - 1439-4235 SN - 1439-7641 VL - 14 IS - 16 SP - 3772 EP - 3776 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Hasinovic, Hida A1 - Friberg, Stieg E. A1 - Kovach, Ildyko A1 - Koetz, Joachim T1 - Janus emulsion drops - equilibrium calculations JF - Journal of dispersion science and technology N2 - Experimental results indicated the contact angles in the drops of Janus emulsions formed in a one-step mixing process to be invariant within a significant range the oil volume ratios, similar to the results from microfluidics emulsification. Since this result points to a connection between the kinetically formed emulsions and the local equilibrium topology of emulsion drops, the effect of interfacial tensions on the morphology of Janus emulsions was estimated from the equilibrium interfacial tensions at the line of contact. Realistic values of the tensions revealed the limited range of these to obtain Janus drops and also offered correlation between the equilibrium entities and the curvature of the interface between the two oils. KW - Drop morphology KW - equilibrium topology KW - Janus emulsions KW - microfluidics KW - multiple emulsion preparation Y1 - 2013 U6 - https://doi.org/10.1080/01932691.2013.763728 SN - 0193-2691 SN - 1532-2351 VL - 34 IS - 12 SP - 1683 EP - 1689 PB - Taylor & Francis Group CY - Philadelphia ER - TY - JOUR A1 - Thete, Aniket A1 - Rojas, Oscar A1 - Neumeyer, David A1 - Koetz, Joachim A1 - Dujardin, Erik T1 - Ionic liquid-assisted morphosynthesis of gold nanorods using polyethyleneimine-capped seeds N2 - Seed-mediated gold nanorods with tunable lengths are prepared using new polyethyleneimine-capped gold nanoparticles synthesized in ionic liquid. The effect of polyethyleneimine and ionic liquid during nanorod growth is investigated and shows a marked effect on their final aspect ratio. Y1 - 2013 UR - http://pubs.rsc.org/en/content/articlepdf/2013/ra/c3ra22112a U6 - https://doi.org/10.1039/C3RA22112A ER - TY - JOUR A1 - Koetz, Joachim A1 - Jagielski, Nicole A1 - Kosmella, Sabine A1 - Friedrich, Alwin A1 - Kleinpeter, Erich T1 - CdS nanocubes formed in phosphatidylcholin-based template phases N2 - The paper is focused on the characterization and use of phosphatidylcholine (PC)-based inverse microemulsions as a template phase for the CdS nanoparticle formation. The optically clear, isotropic phase in the oil corner was identified as a "classicalö water-in-oil microemulsion by means of NMR-diffusion measurements. Because of the very small dimensions of the water droplets, the isotropic phase shows a Newtonian-like flow behavior, and adequate amounts of bulk water cannot be detected by DSC. It is demonstrated that this w/o microemulsion can be used successfully as a nanoreactor for the formation of CdS nanoparticles with diameters of 4-5 nm. During the following process of solvent evaporation the individual small CdS nanoparticles aggregate to significant larger cubic nanoparticles, with an edge length of 2-40 nm, arranged in well-defined mosaic-like superstructures. In presence of SDS the nanocubes were stable up to 800 °C. It has to be stated here that polyelectrolytes prevent the formation of such well-ordered superstructures. Y1 - 2006 UR - http://www.sciencedirect.com/science/journal/09277757 U6 - https://doi.org/10.1016/j.colsurfa.2006.01.013 SN - 0927-7757 VL - 288 SP - 43 EP - 1-3 ER - TY - JOUR A1 - Fechner, Mabya A1 - Kosmella, Sabine A1 - Koetz, Joachim T1 - pH-dependent polyampholyte SDS interactions N2 - Aqueous solutions of sodium dodecylsulfate (SDS) and poly(N,N'-diallyl-N,N'-dimethyl-alt-maleamic carboxylate) (PalH), a synthetic pH-tuneable polyelectrolyte (PEL), have been investigated by various techniques at different pH-values in absence and presence of NaCl. Potentiometric measurements using a surfactant-selective electrode indicate a quite complex interaction mechanism, which can be subdivided into different regions, where non-cooperative, electrostatic and cooperative hydrophobic interactions are of relevance. It was concluded, that in dependence on pH, conformational changes are responsible for the different interaction behavior in the NaCl-free system. Isothermal titration calorimetry (ITC) suggests that early stage hydrophobic binding is an exothermic process followed by electrostatic interactions, which are endothermic in nature and entropy driven. After NaCl addition the interaction mechanism becomes independent of pH due to a screening of (i) attractive interactions between the surfactant head groups and oppositely charged binding sites and (ii) repulsive forces between the surfactant head groups. Furthermore, the ITC investigations have revealed that after salt-addition surfactant micelles interact with the polymer instead of separated SDS molecules due to a depression of the CMC. Y1 - 2010 UR - http://www.sciencedirect.com/science/journal/00219797 U6 - https://doi.org/10.1016/j.jcis.2010.01.092 SN - 0021-9797 ER - TY - JOUR A1 - Rojas, Oscar A1 - Koetz, Joachim A1 - Kosmella, Sabine A1 - Tiersch, Brigitte A1 - Wacker, Philipp A1 - Kramer, Markus T1 - Structural studies of ionic liquid-modified microemulsions N2 - This work is focused on the influence of an ionic liquid (IL), i.e. ethyl-methylimidazolium hexylsulfate, on the spontaneous formation of microemulsions with ionic surfactants. The influence of the ionic liquid on Structure formation in the optically clear phase region in water/toluene/pentanol mixtures in presence of the cationic surfactant CTAB was studied in more detail. The results show a significant increase of the transparent phase region by adding the ionic liquid. Conductometric investigations demonstrate that adding the ionic liquid can drastically reduce the droplet- droplet interactions in the L-2 phase. H-1 nuclear magnetic resonance (H-1 NMR) diffusion coefficient measurements in combination with dynamic light scattering measurements clearly show that inverse microemulsion droplets still exist, but the droplet size is decreased to 2 nm. A more detailed characterisation of the isotropic phase channel by means of conductivity measurements, dynamic light scattering (DLS), H-1 NMR and cryo-scanning electron microscopy (SEM), allows the identification of a bicontinuous sponge phase between the L-1 and L-2 phase. When the poly(ethyleneimine) is added, the isotropic phase range is reduced drastically, but the inverse microemulsion range still exists. Y1 - 2009 UR - http://www.sciencedirect.com/science/journal/00219797 U6 - https://doi.org/10.1016/j.jcis.2009.02.039 SN - 0021-9797 ER - TY - JOUR A1 - Poghosyan, Armen H. A1 - Arsenyan, Levon H. A1 - Gharabekyan, Hrant H. A1 - Koetz, Joachim A1 - Shahinyan, Aram A. T1 - Molecular dynamics study of poly(diallyldimethylammonium chloride) (PDADMAC)/sodium dodecyl sulfate (SDS)/ decanol/water systems N2 - We have performed a 50 ns of molecular dynamics study of poly(diallyldimethylammonium chloride) (PDADMAC)/ sodium dodecyl sulfate (SDS)/decanol/water systems. The influence of the cationic polyelectrolyte on the anionic SDS- based lamellar liquid crystalline system was investigated. The main structural parameters have been calculated and compared with experimental data. We obtain two types of PDADMAC conformation, a more folded structure A and a structure B where the PDADMAC molecule is adsorbed at the anionic head groups of the surfactant molecules. The polyelectrolyte- induced coexistence of two lamellar phases at a concentration of 2-3% of PDADMAC is observed, which is in agreement with experimental findings. Y1 - 2009 UR - http://pubs.acs.org/journal/jpcbfk U6 - https://doi.org/10.1021/Jp806289c SN - 1520-6106 ER - TY - JOUR A1 - Lutter, Stefanie A1 - Koetz, Joachim A1 - Tiersch, Brigitte A1 - Kosmella, Sabine T1 - Polymer-modified bicontinuous microemulsions used as a template for the formation of nanorods N2 - This article is focused on the characterization of the poly(ethylene glycol) (PEG)-induced bicontinuous microemulsion of the pseudo-ternary system sodium dodecylsulfate (SDS)/xylene-pentanol/water by means of differential scanning calorimetry, rheology, and conductometry. The influence of the polymer concentration (cp) and the molecular weight (Mw) on the microstructure of the microemulsion was investigated using Cryo scanning electron microscopy. It was found that an increase of cp influences the structure of the sponge-like phase significantly. These polymer-modified microemulsions can be used as a template phase for the formation of BaSO4 nanorods, where individual nanoparticles (5nm in size) are ordered along the polymer backbone. Y1 - 2009 UR - http://www.informaworld.com/openurl?genre=journal&issn=0193-2691 U6 - https://doi.org/10.1080/01932690802643113 SN - 0193-2691 ER - TY - JOUR A1 - Jyotishkumar, P. A1 - Koetz, Joachim A1 - Tiersch, Brigitte A1 - Strehmel, Veronika A1 - oezdilek, Ceren A1 - Moldenaers, Paula A1 - Hässler, Rüdiger A1 - Thomas, Sabu T1 - Complex phase separation in poly(acrylonitrile-butadiene-styrene)-modified epoxy/4,4 '-diaminodiphenyl sulfone blends : generation of new micro- and nanosubstructures N2 - The epoxy system containing diglycidyl ether of bisphenol A and 4,4'-diaminodiphenyl sulfone is modified with poly(acrylonitrile-butadiene-styrene) (ABS) to explore the effects of the ABS content on the phase morphology, mechanism of phase separation, and viscoelastic properties. The amount of ABS in the blends was 5, 10, 15, and 20 parts per hundred of epoxy resin (phr). Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were employed to investigate the final morphology of ABS-modified epoxy blends. Scanning electron microscopic studies of 15 phr ABS-modified epoxy blends reveal a bicontinuous structure in which both epoxy and ABS are continuous, with substructures of the ABS phase dispersed in the continuous epoxy phase and substructures of the epoxy phase dispersed in the continuous ABS phase. TEM micrographs of 15 phr ABS-modified epoxy blends confirm the results observed by SEM. TEM micrographs reveal the existence of nanosubstructures of ABS in 20 phr ABS-modified epoxy blends. To the best of our knowledge, to date, nanosubstructures have never been reported in any epoxy/thermoplastic blends. The influence of the concentration of the thermoplastic on the generated morphology as analyzed by SEM and TEM was explained in detail. The evolution and mechanism of phase separation was investigated in detail by optical microscopy (OM) and small-angle laser light scattering (SALLS). At concentrations lower than 10 phr the system phase separates through nucleation and growth (NG). However, at higher concentrations, 15 and 20 phr, the blends phase separate through both NG and spinodal decomposition mechanisms. On the basis of OM and SALLS, we conclude that the phenomenon of complex substructure formation in dynamic asymmetric blends is due to the combined effect of hydrodynamics and viscoelasticity. Additionally, dynamic mechanical analysis was carried out to evaluate the viscoelastic behavior of the cross-linked epoxy/ABS blends. Finally, apparent weight fractions of epoxy and ABS components in epoxy- and ABS-rich phases were evaluated from T-g analysis. Y1 - 2009 UR - http://pubs.acs.org/journal/jpcbfk U6 - https://doi.org/10.1021/Jp8094566 SN - 1520-6106 ER - TY - JOUR A1 - Fechner, Mabya A1 - Kramer, Markus A1 - Kleinpeter, Erich A1 - Koetz, Joachim T1 - Polyampholyte-modified ionic microemulsions N2 - This paper is focused on the influence of added polyampholyte, namely poly(N,N;-diallyl-N,N;- dimethyl-alt-maleamic carboxylate) on the inverse micellar phase range of the pseudo-ternary system consisting of toluene-pentanol (1:1)/SDS/water in dependence on the pH value and the temperature. Investigations on phase behavior have revealed that a greater extension in direction to the water-rich corner can be found at pH 4 compared to pH 9. In order to understand changes in the microstructure, polymer-surfactant interactions in dependence on pH have been examined by means of diffusion-ordered spectroscopy, differential scanning calorimetry, as well as conductivity measurements. The results have proven that the present microemulsion consists of water-in-oil droplets, with the polyampholyte located more in the inner core of the water droplets at pH 9 rather than at the interphase of the surfactant film at pH 4. Y1 - 2009 UR - http://www.springerlink.com/content/101551 U6 - https://doi.org/10.1007/s00396-009-2074-4 SN - 0303-402X ER - TY - JOUR A1 - Dautzenberg, Herbert A1 - Jaeger, Werner A1 - Koetz, Joachim A1 - Philipp, B. A1 - Seidel, Ch. A1 - Stscherbina, D. T1 - Polyelectrolytes : formation, characterization and application Y1 - 1994 PB - Hanser CY - München [u.a.] ER - TY - JOUR A1 - Dautzenberg, Herbert A1 - Koetz, Joachim A1 - Rother, G. A1 - Philipp, B. A1 - Rother, G. T1 - Static light scattering of polyelectrolyte complex solutions Y1 - 1994 ER - TY - JOUR A1 - Koetz, Joachim A1 - Kosmella, Sabine T1 - Interactions between polyanion-polycation systems and kaolin Y1 - 1994 ER - TY - JOUR A1 - Koetz, Joachim A1 - Kosmella, Sabine T1 - Interactions between Poly(diallyldimethylammonium Chloride) and Poly(Acrylic Acid) in dependence on polymer concentration Y1 - 1994 ER - TY - JOUR A1 - Koetz, Joachim A1 - Kosmella, Sabine T1 - Structured pigments due to polyelectro lyte complex formation Y1 - 1995 ER - TY - JOUR A1 - Koetz, Joachim T1 - Phase behaviour of polyanion-polycation systems Y1 - 1995 ER - TY - JOUR A1 - Kosmella, Sabine A1 - Koetz, Joachim A1 - Friberg, Stig E. A1 - Mackay, R. A. T1 - Interactions of polyelectrolytes with the lyotropic liquid crystalline system - hexadecyltrimethylammonium bromide / decanol / water Y1 - 1996 SN - 0927-7757 ER - TY - JOUR A1 - Kosmella, Sabine A1 - Koetz, Joachim A1 - Friberg, Stig E. A1 - Mackay, R. A T1 - Interactions of polyelectrolytes with the lyotropic liquid crystalline system Na-dodecylsulfate / decanol / water Y1 - 1996 ER - TY - JOUR A1 - Koetz, Joachim A1 - Köpke, Heike A1 - Schmidt-Naake, Gudrun A1 - Zarras, Peter A1 - Vogl, Otto T1 - Polyanion-polycation complex formation as a function of the position of the functional groups Y1 - 1996 ER - TY - JOUR A1 - Koetz, Joachim T1 - Polyelectrolyte complexes Y1 - 1996 ER -