TY - THES A1 - Xü, Chenggang T1 - Preparation and characterization of vapour deposited films based on substituted 2,5-diphenyl-1,3,4-oxadiazole derivatives N2 - Diese Arbeit befasst sich mit dem Einfluss der molekularen Struktur von 2,5-Diphenyl-1,3,4-Oxadiazol-Derivaten auf die Präparierung dünner Schichten mittels Vakuumdeposition. Dünne Schichten von diesen Substanzen wurden auf Si/SiO2 aufgedampft und ihre Struktur systematisch mittels XSR, AFM und IR untersucht. Das Ergebnis zeigt, dass die Schichtstrukturen offenbar von Substratetemperatur (Ts) abhängig sind. Im untersuchten Ts-Bereich bilden etherverbrückte Oxadiazole immer geordnete Schichten und die Schichtperiodicität hängt linear von der Längen der aliphatischen Ketten, während sich bei den amidverbrückten Oxadiazolen nur bei hohen Ts geordnete Schichten bilden können. Diese Unterschiede sind auf die intermolekularen Wasserstoffbrücken zurückzuführen. Der Tilt-Winkel der Moleküle ist durch die Wechselwirkung zwischen dem aromatischen Teil bestimmt. Die Wechselwirkungen zwischen den Kopfgruppen können durch Tempern abgeschwächt werden und führen zur Strukturumwandlung von Schichten, die auf etherverbrückten Oxadiazolen basieren. Alle Schichten von etherverbrückten Oxadiazolen haben Doppelschicht-Struktur, aber amidverbrückte Oxadiazole bilden nur Doppelschicht-Strukturen, wenn die Moleküle eine Kopfgruppe besitzen. N2 - The correlations between the chemical structures of the 2,5-diphenyl-1,3,4-oxadiazole compounds and their corresponding vapour deposited film structures on Si/SiO2 were systematically investigated with AFM, XSR and IR for the first time. The result shows that the film structure depends strongly on the substrate temperature (Ts). For the compounds with ether bridge group, the film periodicity depends linearly on the length of the aliphatic chain. The films based on those oxadiazols have ordered structure in the investigated substrate temperature region, while die amide bridged compounds form ordered film only at high Ts due to the formation of intermolecular H-bond. The tilt angle of most molecules is determined by the pi-pi complexes between the molecules. The intermolecular interaction between head groups leads to the structural transformation during the thermal treatment after deposition. All the ether bridged oxadiazoles form films with bilayer structure, while amide bridged oxadiazole form film bilayer structure only when the molecule has a head group. KW - 1 KW - 3 KW - 4-oxadiazol KW - Vapour Deposition KW - Dünnschichten KW - AFM KW - X-ray KW - Infrarot Spektroskopie KW - intermolekülare Wechselwirkung KW - Hochvakuum KW - 1 KW - 3 KW - 4-oxadiazole KW - vapour deposition KW - Thin film KW - AFM KW - X-ray KW - Infrared spectroscopy KW - intermolecular interaction KW - high vacuum Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-0001358 ER - TY - JOUR A1 - Kaiser, Michael A1 - Zederer, Dan P. A1 - Ellerbrock, Ruth H. A1 - Sommer, Michael A1 - Ludwig, Bernard T1 - Effects of mineral characteristics on content, composition, and stability of organic matter fractions separated from seven forest topsoils of different pedogenesis JF - Geoderma : an international journal of soil science N2 - Mineral topsoils possess large organic carbon (OC) contents but there is only limited knowledge on the mechanisms controlling the preservation of organic matter (OM) against microbial decay. Samples were taken from the uppermost mineral topsoil horizon (0 to 5 cm) of seven sites under mature deciduous forest showing OC contents between 69 and 164 g kg(-1) and a wide range in mineral characteristics. At first, organic particles and the water-extractable OM were removed from the soil samples. Thereafter, Na-pyrophosphate extractable organic matter (OM(PY)), assumed to be indicative for OM bound via cation mediated interactions, and the OM remaining in the extraction residue (OM(ER)), supposed to be indicative for OM occluded in mechanically highly stable micro-aggregates, were sequentially separated and quantified. The composition of OM(PY) and OM(ER) was analyzed by FTIR and their stability by C-14 measurements. The OC remaining in the extraction residues accounted for 38 to 59% of the bulk soil OC (SOC) suggesting a much larger relevance of OM(ER) for the OM dynamic in the analyzed soils as compared with OM(PY) that accounted for 1.6 to 7.5% of the SOC. The FUR analyses revealed a lower relative proportion of C=O groups in OM(ER) compared to OM(PY) indicating differences in the degree of microbial processing between these fractions. Correlation analyses suggest an increase in the stability of OM(PY) with the soil pH and contents of Na-pyrophosphate soluble Fe, Al, and Mg and an increase in the stability of OM(ER) with the soil pH and the contents of clay and oxalate-soluble Fe and Al. Despite the detected influence of soil mineral characteristics on the turnover of OM(PY) and OM(ER), the Delta C-14 signatures indicated mean residence times less than 100 years. The presence of less stabilized OM in these fractions can be derived from methodological uncertainties and/or the fast cycling compartment of mineral-associated OM. (C) 2015 Elsevier B.V. All rights reserved. KW - Forest mineral topsoil KW - Organic matter stabilization KW - Na-pyrophosphate soluble organic matter KW - Micro-aggregates KW - Infrared spectroscopy KW - C-14 analyses Y1 - 2016 U6 - https://doi.org/10.1016/j.geoderma.2015.08.029 SN - 0016-7061 SN - 1872-6259 VL - 263 SP - 1 EP - 7 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Burek, Katja A1 - Krause, Felix A1 - Schwotzer, Matthias A1 - Nefedov, Alexei A1 - Süssmuth, Julia A1 - Haubitz, Toni A1 - Kumke, Michael Uwe A1 - Thissen, Peter T1 - Hydrophobic Properties of Calcium-Silicate Hydrates Doped with Rare-Earth Elements JF - ACS sustainable chemistry & engineering N2 - In this study, the apparent relationship between the transport process and the surface chemistry of the Calcium-Silicate Hydrate (CSH) phases was investigated. For this purpose, a method was developed to synthesize ultrathin CSH phases to be used as a model substrate with the specific modification of their structure by introducing europium (Eu(III)). The structural and chemical changes during this Eu(III)-doping were observed by means of infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), and time-resolved laser fluorescence spectroscopy (TRLFS). These alterations of the CSH phases led to significant changes in the surface chemistry and consequently to considerable variations in the interaction with water, as evidenced by measurements of the contact angles on the modified model substrates. Our results provide the basis for a more profound molecular understanding of reactive transport processes in cement-based systems. Furthermore, these results broaden the perspective of improving the stability of cement-based materials, which are subjected to the impact of aggressive aqueous environments through targeted modifications of the CSH phases. KW - Rare-earth elements KW - Europium KW - Luminescence KW - Metal-proton exchange reaction KW - Contact angle KW - Infrared spectroscopy KW - X-ray photoelectron spectroscopy Y1 - 2018 U6 - https://doi.org/10.1021/acssuschemeng.8b03244 SN - 2168-0485 VL - 6 IS - 11 SP - 14669 EP - 14678 PB - American Chemical Society CY - Washington ER -