TY - GEN A1 - Hentrich, Doreen A1 - Tauer, Klaus A1 - Espanol, Montserrat A1 - Ginebra, Maria-Pau A1 - Taubert, Andreas T1 - EDTA and NTA effectively tune the mineralization of calcium phosphate from bulk aqueous solution T2 - Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe N2 - This study describes the effects of nitrilotriacetic acid (NTA) and ethylenediaminotetraacetic acid (EDTA) on themineralization of calciumphosphate from bulk aqueous solution. Mineralization was performed between pH 6 and 9 and with NTA or EDTA concentrations of 0, 5, 10, and 15 mM. X-ray diffraction and infrared spectroscopy show that at low pH, mainly brushite precipitates and at higher pH, mostly hydroxyapatite forms. Both additives alter the morphology of the precipitates. Without additive, brushite precipitates as large plates. With NTA, the morphology changes to an unusual rod-like shape. With EDTA, the edges of the particles are rounded and disk-like particles form. Conductivity and pH measurements suggest that the final products form through several intermediate steps. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 1095 KW - biomineralization KW - biomimetic mineralization KW - calcium phosphate KW - NTA KW - EDTA KW - precipitation KW - brushite KW - hydroxyapatite Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-469186 SN - 1866-8372 IS - 1095 ER - TY - JOUR A1 - Hentrich, Doreen A1 - Tauer, Klaus A1 - Espanol, Montserrat A1 - Ginebra, Maria-Pau A1 - Taubert, Andreas T1 - EDTA and NTA effectively tune the mineralization of calcium phosphate from bulk aqueous solution JF - Biomimetics N2 - This study describes the effects of nitrilotriacetic acid (NTA) and ethylenediaminotetraacetic acid (EDTA) on themineralization of calciumphosphate from bulk aqueous solution. Mineralization was performed between pH 6 and 9 and with NTA or EDTA concentrations of 0, 5, 10, and 15 mM. X-ray diffraction and infrared spectroscopy show that at low pH, mainly brushite precipitates and at higher pH, mostly hydroxyapatite forms. Both additives alter the morphology of the precipitates. Without additive, brushite precipitates as large plates. With NTA, the morphology changes to an unusual rod-like shape. With EDTA, the edges of the particles are rounded and disk-like particles form. Conductivity and pH measurements suggest that the final products form through several intermediate steps. KW - biomineralization KW - biomimetic mineralization KW - calcium phosphate KW - NTA KW - EDTA KW - precipitation KW - brushite KW - hydroxyapatite Y1 - 2017 U6 - https://doi.org/10.3390/biomimetics2040024 SN - 2313-7673 VL - 2 IS - 4 PB - MDPI CY - Basel ER - TY - JOUR A1 - Hardy, John G. A1 - Torres-Rendon, Jose Guillermo A1 - Leal-Egana, Aldo A1 - Walther, Andreas A1 - Schlaad, Helmut A1 - Coelfen, Helmut A1 - Scheibel, Thomas R. T1 - Biomineralization of Engineered Spider Silk Protein-Based Composite Materials for Bone Tissue Engineering JF - Materials N2 - Materials based on biodegradable polyesters, such as poly(butylene terephthalate) (PBT) or poly(butylene terephthalate-co-poly(alkylene glycol) terephthalate) (PBTAT), have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16)), that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering. KW - spider silk KW - recombinant protein KW - biodegradable polymers KW - biomaterials KW - biomineralization KW - bone tissue engineering Y1 - 2016 U6 - https://doi.org/10.3390/ma9070560 SN - 1996-1944 VL - 9 SP - 93 EP - 108 PB - MDPI CY - Basel ER - TY - JOUR A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-Soluble Cellulose Derivatives Are Sustainable Additives for Biomimetic Calcium Phosphate Mineralization JF - Inorganics : open access journal N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2016 U6 - https://doi.org/10.3390/inorganics4040033 SN - 2304-6740 VL - 4 PB - MDPI CY - Basel ER - TY - GEN A1 - Hardy, John G. A1 - Torres-Rendon, Jose Guillermo A1 - Leal-Egaña, Aldo A1 - Walther, Andreas A1 - Schlaad, Helmut A1 - Cölfen, Helmut A1 - Scheibel, Thomas R. T1 - Biomineralization of engineered spider silk protein-based composite materials for bone tissue engineering N2 - Materials based on biodegradable polyesters, such as poly(butylene terephthalate) (PBT) or poly(butylene terephthalate-co-poly(alkylene glycol) terephthalate) (PBTAT), have potential application as pro-regenerative scaffolds for bone tissue engineering. Herein, the preparation of films composed of PBT or PBTAT and an engineered spider silk protein, (eADF4(C16)), that displays multiple carboxylic acid moieties capable of binding calcium ions and facilitating their biomineralization with calcium carbonate or calcium phosphate is reported. Human mesenchymal stem cells cultured on films mineralized with calcium phosphate show enhanced levels of alkaline phosphatase activity suggesting that such composites have potential use for bone tissue engineering. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 359 KW - spider silk KW - recombinant protein KW - biodegradable polymers KW - biomaterials KW - biomineralization KW - bone tissue engineering Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400519 ER - TY - GEN A1 - Taubert, Andreas A1 - Balischewski, Christian A1 - Hentrich, Doreen A1 - Elschner, Thomas A1 - Eidner, Sascha A1 - Günter, Christina A1 - Behrens, Karsten A1 - Heinze, Thomas T1 - Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization N2 - The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 354 KW - cellulose KW - polyamine KW - polyammonium salt KW - polycarboxylate KW - polyzwitterion KW - calcium phosphate KW - biomineralization KW - brushite KW - hydroyxapatite KW - biomaterial Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-400453 ER - TY - JOUR A1 - Salama, Ahmed A1 - Neumann, Mike A1 - Günter, Christina A1 - Taubert, Andreas T1 - Ionic liquid-assisted formation of cellulose/calcium phosphate hybrid materials JF - Beilstein journal of nanotechnology N2 - Cellulose/calcium phosphate hybrid materials were synthesized via an ionic liquid-assisted route. Scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction, infrared spectroscopy, and thermogravimetric analysis/differential thermal analysis show that, depending on the reaction conditions, cellulose/hydroxyapatite, cellulose/ chlorapatite, or cellulose/monetite composites form. Preliminary studies with MC3T3-E1 pre-osteoblasts show that the cells proliferate on the hybrid materials suggesting that the ionic liquid-based process yields materials that are potentially useful as scaffolds for regenerative therapies. KW - biomineralization KW - calcium phosphate KW - carbohydrates KW - cellulose KW - hybrid materials KW - ionic liquid Y1 - 2014 U6 - https://doi.org/10.3762/bjnano.5.167 SN - 2190-4286 VL - 5 SP - 1553 EP - 1568 PB - Beilstein-Institut zur Förderung der Chemischen Wissenschaften CY - Frankfurt, Main ER - TY - THES A1 - Faivre, Damien T1 - Biological and biomimetic formation and organization of magnetic nanoparticles T1 - Biologische und biomimetische Bildung und Anordnung von magnetischen Nanopartikel N2 - Biological materials have ever been used by humans because of their remarkable properties. This is surprising since the materials are formed under physiological conditions and with commonplace constituents. Nature thus not only provides us with inspiration for designing new materials but also teaches us how to use soft molecules to tune interparticle and external forces to structure and assemble simple building blocks into functional entities. Magnetotactic bacteria and their chain of magnetosomes represent a striking example of such an accomplishment where a very simple living organism controls the properties of inorganics via organics at the nanometer-scale to form a single magnetic dipole that orients the cell in the Earth magnetic field lines. My group has developed a biological and a bio-inspired research based on these bacteria. My research, at the interface between chemistry, materials science, physics, and biology focuses on how biological systems synthesize, organize and use minerals. We apply the design principles to sustainably form hierarchical materials with controlled properties that can be used e.g. as magnetically directed nanodevices towards applications in sensing, actuating, and transport. In this thesis, I thus first present how magnetotactic bacteria intracellularly form magnetosomes and assemble them in chains. I developed an assay, where cells can be switched from magnetic to non-magnetic states. This enabled to study the dynamics of magnetosome and magnetosome chain formation. We found that the magnetosomes nucleate within minutes whereas chains assembles within hours. Magnetosome formation necessitates iron uptake as ferrous or ferric ions. The transport of the ions within the cell leads to the formation of a ferritin-like intermediate, which subsequently is transported and transformed within the magnetosome organelle in a ferrihydrite-like precursor. Finally, magnetite crystals nucleate and grow toward their mature dimension. In addition, I show that the magnetosome assembly displays hierarchically ordered nano- and microstructures over several levels, enabling the coordinated alignment and motility of entire populations of cells. The magnetosomes are indeed composed of structurally pure magnetite. The organelles are partly composed of proteins, which role is crucial for the properties of the magnetosomes. As an example, we showed how the protein MmsF is involved in the control of magnetosome size and morphology. We have further shown by 2D X-ray diffraction that the magnetosome particles are aligned along the same direction in the magnetosome chain. We then show how magnetic properties of the nascent magnetosome influence the alignment of the particles, and how the proteins MamJ and MamK coordinate this assembly. We propose a theoretical approach, which suggests that biological forces are more important than physical ones for the chain formation. All these studies thus show how magnetosome formation and organization are under strict biological control, which is associated with unprecedented material properties. Finally, we show that the magnetosome chain enables the cells to find their preferred oxygen conditions if the magnetic field is present. The synthetic part of this work shows how the understanding of the design principles of magnetosome formation enabled me to perform biomimetic synthesis of magnetite particles within the highly desired size range of 25 to 100 nm. Nucleation and growth of such particles are based on aggregation of iron colloids termed primary particles as imaged by cryo-high resolution TEM. I show how additives influence magnetite formation and properties. In particular, MamP, a so-called magnetochrome proteins involved in the magnetosome formation in vivo, enables the in vitro formation of magnetite nanoparticles exclusively from ferrous iron by controlling the redox state of the process. Negatively charged additives, such as MamJ, retard magnetite nucleation in vitro, probably by interacting with the iron ions. Other additives such as e.g. polyarginine can be used to control the colloidal stability of stable-single domain sized nanoparticles. Finally, I show how we can “glue” magnetic nanoparticles to form propellers that can be actuated and swim with the help of external magnetic fields. We propose a simple theory to explain the observed movement. We can use the theoretical framework to design experimental conditions to sort out the propellers depending on their size and effectively confirm this prediction experimentally. Thereby, we could image propellers with size down to 290 nm in their longer dimension, much smaller than what perform so far. N2 - Biologische Materialien wie Knochen, Muscheln und Holz wurden von den Menschen seit den ältesten Zeiten verwendet. Diese biologisch gebildeten Materialien haben bemerkenswerte Eigenschaften. Dies ist besonders überraschend, da sie unter physiologischen Bedingungen und mit alltäglichen Bestandteilen gebildet sind. Die Natur liefert uns also nicht nur mit Inspiration für die Entwicklung neuer Materialien, sondern lehrt uns auch, wie biologische Additiven benutzen werden können, um einfache synthetische Bausteine in funktionale Einheiten zu strukturieren. Magnetotaktischen Bakterien und ihre Kette von Magnetosomen sind ein Beispiel, wo einfache Lebewesen die Eigenschaften von anorganischen Materialien steuern, um sich entlang den magnetischen Feldlinien der Erde zu orientieren. Die von den Bakterien gebildeten Magnetosomen sind von besonderem Interesse, da mit magnetischen Eisenoxid-Nanopartikeln in den letzten zehn Jahren einer Vielzahl von Bio-und nanotechnologischen Anwendungen entwickelt worden sind. In dieser Arbeit stelle ich eine biologische und eine bio-inspirierte Forschung auf der Grundlage der magnetotaktischen Bakterien vor. Diese Forschung verbindet die neuesten Entwicklungen von Nanotechnik in der chemischen Wissenschaft, die neuesten Fortschritte der Molekularbiologie zusammen mit modernen Messverfahren. Mein Forschungsschwerpunkt liegt somit an der Schnittstelle zwischen Chemie, Materialwissenschaften, Physik und Biologie. Ich will verstehen, wie biologische Systeme Materialien synthetisieren und organisieren, um Design-Prinzipien zu extrahieren, damit hierarchischen Materialien mit kontrollierten Eigenschaften nachhaltig gebildet werden. KW - magnetotaktische Bakterien KW - Magnetit Nanopartikel KW - Biomineralisation KW - magnetite KW - nanoparticle KW - biomineralization KW - magnetosome KW - magnetotactic bacteria Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-72022 ER - TY - THES A1 - Gehrke, Nicole T1 - Retrosynthese von Perlmutt T1 - Retrosynthesis of nacre N2 - In dieser Arbeit ist es gelungen, die Bedeutung physikalisch-chemischer Mechanismen in der Biomineralisation gegenüber der bisher angenommenen Dominanz spezifischer biomolekularer Erkennungsmechanismen aufzuzeigen. Dazu wurden drei Ansätze verfolgt: Zum einen wurden Studien zur Calciumcarbonatkristallisation durchgeführt. Zum anderen wurde das Biomineral Perlmutt intensiv untersucht. Als drittes wurde ein Modellsystem entwickelt, mit dem künstliches Perlmutt synthetisiert und ein Mechanismus für die Perlmuttmineralisation vorgeschlagen werden konnte. Im ersten Schritt wurden in einem simplen Kristallisationsansatz komplexe Calciumcarbonatüberstrukturen ohne die Verwendung von Additiven synthetisiert. Es wurde gezeigt, daß diese durch orientierte Anlagerung von Nanopartikeln gebildet werden, bei der dipolare Felder eine wichtige Rolle zu spielen scheinen. Dieser Mechansimus war bislang für Calciumcarbonat unbekannt und ermöglicht die Synthese komplexer Kristallmorphologien, wodurch die Frage aufgeworfen wird, ob er bei der Biomineralbildung von Bedeutung sein kann. Durch Einsatz minimaler Mengen eines einfachen, synthetischen Additivs bei der Kristallisation wurden zu Überstrukturen angeordnete Aragonitplättchen synthetisiert, die von einer wenige nm dicken Schicht aus amorphen Calciumcarbonat umgeben sind. Eine solche Schicht wurde auch bei den Aragonitplättchen Perlmutts entdeckt (s.u.) und bietet möglicherweise in verschiedenen Systemen eine Erklärung für die Stabilisierung der sonst metastabilen Aragonitphase. Im zweiten Schritt wurden bei der Untersuchung von natürlichem Perlmutt zwei bislang unbekannte Strukturmerkmale entdeckt: Es gibt Bereiche, die nicht aus den charakteristischen Plättchen bestehen, sondern wesentlich weniger stark mineralisert sind. Die Mineralphase besteht in diesen Bereichen aus Nanopartikeln. Es wurde weiterhin gezeigt, daß die Aragonitplättchen von einer wenige nm dicken Schicht aus amorphem Calciumcarbonat umgeben ist. Die gängigen Modelle der Perlmuttbildung sind mit diesen Beobachtungen nicht zu vereinbaren und somit zu hinterfragen. Dagegen deuten diese Ergebnisse ein Wachstum von Perlmutt über ACC-Nanopartikel an. Unter der Annahme der Bedeutung physikalisch-chemischer Mechanismen in der Biomineralisation wurde schließlich als dritter Schritt ein Ansatz zur in vitro-Retrosynthese von Biomineralien ausgehend von ihrer unlöslichen Matrix entwickelt. Mit diesem Ansatz ist es erstmals gelungen, künstliches Perlmutt auf synthetischem Wege herzustellen, das morphologisch nicht vom Original zu unterscheiden ist. Die existierenden Unterschiede konnten zeigen, daß der Mineralisationsprozeß nicht auf ein spezifisches Mikroumgebungssystem beschränkt, sondern "allgemeiner gültig"' sein muß. Bei der Retrosynthese gibt es zwei Schlüsselfaktoren: Zum einen die demineralisierte unlösliche Perlmuttmatrix als dreidimensionales Gerüst für das künstliche Perlmutt, zum anderen amorphe Precursorpartikel, die die Mineralphase bilden. Es werden keinerlei Proteine oder andere Biomoleküle verwendet. Dieser Ansatz bietet die Möglichkeit, den Mineralisationsprozeß an einem in vitro-Modellsystem zu verfolgen, was für das in vivo-System, wenn überhaupt, nur unter starken Einschränkungen möglich ist. Es wurde gezeigt, daß das künstliche Perlmutt über die Mesoskalentransformation von ACC-Precursorn innerhalb der Matrix gebildet wird und als möglicher Mechanismus bei der Biomineralisation von natürlichem Perlmutt diskutiert. Es konnte in der vorliegenden Arbeit konsequent gezeigt werden, daß die Imitation von Biomineralisationsprozessen in in vitro-Ansätzen möglich ist, wobei chemisch-physikalische Parameter dominieren. In zukünftigen Studien sollten einerseits die mechanischen Eigenschaften des künstlichen Perlmutts untersucht werden, wofür sich in Vorversuchen im Rahmen dieser Arbeit die Nanoindentierung als geeignet herausgestellt hat. Es sollte geprüft werden, ob das hier ermittelte Prinzip zur Mineralisierung in der Materialentwicklung angewendet werden kann. Andererseits sollte die Retrosynthese auf andere Systeme ausgeweitet und in vivo-Studien durchgeführt werden, um die Gültigkeit der vorgeschlagenen Mechanismen zu überprüfen. N2 - This thesis highlights the importance of physical-chemical mechanisms in biomineralisation and, thus, challenges the widely accepted dominance of specific biomolecular recognition mechanisms. The work is divided into three parts: the first part addresses the crystallisation of calcium carbonate; the second part focuses on an intensive study of the biomineral, nacre, and, lastly, a retrosynthesis model system is designed and applied to synthesize artificial nacre. A mechanism for nacre mineralisation in nature is proposed. Initially, complex calcium carbonate superstructures were synthesized in the absence of any additive. These were shown to grow by an oriented attachment mechanism of nanoparticles, presumably under the influence of dipolar fields. This growth mechanism has, to date, not been described for calcium carbonate. This mechanism opens the possibility to synthesize complex crystal morphologies of calcium carbonate and arises the question as to whether it plays a role in the growth of biominerals. With the presence of small amounts of additives in calcium carbonate crystallisation it was possible to synthesize superstructures of aragonite platelets, each of which surrounded by a layer of amorphous calcium carbonate (ACC). Such ACC layers were also found in natural nacre (see below) and may explain the stabilisation of the metastable calcium carbonate polymorph aragonite. In the second part of this thesis two unknown features of nacre structures were distinguished: Some areas within the nacre do not consist of the characteristic aragonite platelets but are mineralized only to a low degree. In these areas the mineral phase is clearly composed of nanoparticles. Furthermore, the aragonite platelets of nacre are shown to be surrounded by an ACC layer. Both observations contradict the classical models of nacre growth mechanisms but hint towards a growth via ACC nanoparticles. Assuming the importance of physical-chemical mechanisms in biomineralisation, an approach for the in vitro retrosynthesis of biominerals was designed. Through this, it was possible, for the first time, to synthesize artificial nacre, which was indistinguishable in morphology from the original. The non-morphological differences between original and synthesized nacre showed that the biological process of mineralization is not limited to one specific microenvironment, but must be more general. Two key factors are of importance for the retrosynthesis approach: 1) The demineralised nacre matrix, which forms a scaffold for the artificial mineral phase and; 2) amorphous nanoparticles as precursors, which transform into the mineral phase. No proteins or other biomolecules were utilized. In this way, the biomineralisation process could be followed in an in vitro model, a process, which is hardly possible in such detail under in vivo conditions. This work proves that the artificial nacre grows by a mesoscale transformation of ACC nanoparticles, and discusses this mechanism as a possible growth mechanism of natural nacre. This work consequently shows that it is possible to imitate biomineralisation processes in vitro and that, in–vitro, these processes are driven by physico-chemical parameters. Future studies will involve investigation of the mechanical properties of the artificial nacre. First experiments indicate, that nanoindentation is hereby suitable. The potential application of the in vitro mineralization mechanism for new material development will be investigated. Furthermore, the retrosynthesis will be applied to other biomineral systems and, subsequently, in vivo studies will be performed so as to investigate the role of the proposed mechanisms for the natural biomineralisation process. KW - Biomineralisation KW - Perlmutt KW - Retrosynthese KW - Präkursor KW - Calciumcarbonat KW - physikalisch-chemisch KW - amorph KW - Mesoskalentransformation KW - biomineralization KW - nacre KW - retrosynthesis KW - mesoscale transormation KW - calcium carbonate Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7971 ER -