TY  - THES
A1  - Justynska, Justyna
T1  - Towards a library of functional block copolymers : synthesis and colloidal properties
T1  - Hin zu einer Bibliothek von funktionalen Blockcopolymeren : Synthese und kolloidale Eigenschaften
N2  - Understanding the principles of self-organisation exhibited by block copolymers requires the combination of synthetic and physicochemical knowledge. The ability to synthesise block copolymers with desired architecture facilitates the ability to manipulate their aggregation behaviour, thus providing the key to nanotechnology. Apart from relative block volumes, the size and morphology of the produced nanostructures is controlled by the effective incompatibility between the different blocks. Since polymerisation techniques allowing for the synthesis of well-defined block copolymers are restricted to a limited number of monomers, the ability to tune the incompatibility is very limited.  Nevertheless, Polymer Analogue Reactions can offer another possibility for the production of functional block copolymers by chemical modifications of well-defined polymer precursors. Therefore, by applying appropriate modification methods both volume fractions and incompatibility, can be adjusted. Moreover, copolymers with introduced functional units allow utilization of the concept of molecular recognition in the world of synthetic polymers. The present work describes a modular synthetic approach towards functional block copolymers. Radical addition of functional mercaptanes was employed for the introduction of diverse functional groups to polybutadiene-containing block copolymers. Various modifications of 1,2-polybutadiene-poly(ethylene oxide) block copolymer precursors are described in detail. Furthermore, extension of the concept to 1,2-polybutadiene-polystyrene block copolymers is demonstrated. Further investigations involved the self-organisation of the modified block copolymers. Formed aggregates in aqueous solutions of block copolymers with introduced carboxylic acid, amine and hydroxyl groups as well as fluorinated chains were characterised. Study of the aggregation behaviour allowed general conclusions to be drawn regarding the influence of the introduced groups on the self-organisation of the modified copolymers. Finally, possibilities for the formation of complexes, based on electrostatic or hydrogen-bonding interactions in mixtures of block copolymers bearing mutually interacting functional groups, were investigated.
N2  - Um die Prinzipien der Selbstorganisation von Blockcopolymeren zu verstehen, ist es notwendig das Wissen auf den Gebieten der Synthese und der Physikochemie zu kombinieren. Die Fähigkeit, Blockcopolymere mit gewünschter Architektur zu synthetisieren, gibt einem auch die Möglichkeit das Aggregationsverhalten zu steuern, was wiederum der Schlüssel zur Nanotechnologie ist. Abgesehen von den relativen Blockvolumina, wird die Größe und Morphologie der gebildeten Nanostrukturen durch die effektive Inkompartibilität zwischen den unterschiedlichen Blöcken bestimmt. Da die Polymerisationstechniken, mit denen man gut definierte Blockcopolymere synthetisieren kann, auf bestimmte Monomere beschränkt sind, läßt sich diese Inkompatibilität nur eingeschränkt abstimmen. Polymeranaloge Reaktionen können dagegen eine Möglichkeit bieten, funktionale Blockcopolymere durch die chemische Modifizierung von gut definierten Copolymeren zu erhalten. Somit können, bei Verwendung von geeigneten Modifikationsmethoden, die Volumenanteile sowie die Inkompatibilität der Blöcke angepasst werden. Außerdem können Copolymere, die funktionelle Gruppe enthalten, es ermöglichen das Prinzip der molekularen Erkennung (Schloss-Schlüssel) auf dem Gebiet der synthetischen Polymere anzuwenden. Die vorleigende Arbeit beschreibt einen Ansatz zur modularen Synthese von funktionalen Blockcopolymeren. Durch radikalische Addition von funktionellen Mercaptanen wurden in Copolymere mit einem Polybutadien-Block verschiedenen funktionelle Gruppen eingebracht. Von 1,2-Polybutadien-Polyethylenoxid Blockcopolymeren werden dabei mehrere Modifikationen im Detail beschrieben. Zudem wird die Erweiterung des Konzepts auf 1,2-Polybutadien-Polystyrol Blockcopolymere gezeigt. Die weiteren Untersuchungen betrafen die Selbstorganisation der modifizierten Blockcopolymere in Lösung. Hierbei wurden die Aggregate, die in wässriger Lösung von Blockcopolymeren mit Carbonsäure-, Amin- und Hydroxylgruppen sowie fluorierte Ketten gebildet werden, charakterisiert. Die Untersuchung des Aggregationsverhaltens erlaubt es, generelle Aussagen über den Einfluss der eingebrachten Gruppen auf die Selbstorganisation der modifizierten Copolymere zu treffen. Abschließend wurde die Bildung von Komplexen auf der Basis von elektrostatischer Wechselwirkung oder Wasserstoffbrückenbindung in Mischungen aus Copolymeren, die untereinander Wechselwirkende funktionale Gruppe besitzen, untersucht.
T2  - Towards a library of functional block copolymers : synthesis and colloidal properties
KW  - Blockcopolymere
KW  - Funktionalisierung <Chemie>
KW  - Selbstorganisation
KW  - Kolloid
KW  - Komplexe
KW  - Thiole
KW  - block copolymers
KW  - functionalization
KW  - self-organisation
KW  - colloids
KW  - complexes
Y1  - 2005
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5907
ER  - 
TY  - THES
A1  - Kubowicz, Stephan
T1  - Design and characterization of multicompartment micelles in aqueous solution
T1  - Design und Charakterisierung von Multikompartiment-Mizellen in wässriger Lösung
N2  - Self-assembly of polymeric building blocks is a powerful tool for the design of novel materials and structures that combine different properties and may respond to external stimuli. In the past decades, most studies were focused on the self-assembly of amphiphilic diblock copolymers in solution. The dissolution of these block copolymers in a solvent selective for one block results mostly in the formation of micelles. The micellar structure of diblock copolymers is inherently limited to a homogeneous core surrounded by a corona, which keeps the micelle in solution. Thus, for drug-delivery applications, such structures only offer a single domain (the hydrophobic inner core) for drug entrapment. Whereas multicompartment micelles composed of a water-soluble shell and a segregated hydrophobic core are novel, interesting morphologies for applications in a variety of fields including medicine, pharmacy and biotechnology. The separated incompatible compartments of the hydrophobic core could enable the selective entrapment and release of various hydrophobic drugs while the hydrophilic shell would permit the stabilization of these nanostructures in physiological media. However, so far, the preparation and control of stable multicompartment micellar systems are in the first stages and the number of morphological studies concerning such micelles is rather low. Thus considerably little is known about their exact inner structures. In the present study, we concentrate on four different approaches for the preparation of multicompartment micelles by self-assembly in aqueous media. A similarity of all approaches was that hydrocarbon and fluorocarbon blocks were selected for all employed copolymers since such segments tend to be strongly incompatible, and thus favor the segregation into distinct domains. Our studies have shown that the self-assembly of the utilized copolymers in aqueous solution leads in three cases to the formation of multicompartment micelles. As expected the shape and size of the micelles depend on the molecular architecture and to some extent also on the way of preparation. These novel structured colloids may serve as models as well as mimics for biological structures such as globular proteins, and may open interesting opportunities for nanotechnology applications.
N2  - Die Selbstorganisation von synthetischen amphiphilen Blockcopolymeren ist ein vielseitiger Prozeß, der die Entwicklung von neuartigen Materialien, die verschiedene Eigenschaften miteinander verbinden und auch auf äußere Reize reagieren können, ermöglicht. In den letzten Jahrzehnten haben sich viele Untersuchungen mit der Selbstorganisation von Diblockcopolymeren in Lösung beschäftigt. So bilden zum Beispiel amphiphile Diblock-Copolymere in Wasser meist Mizellen die einen hydrophoben Kern und eine hydrophile Hülle besitzen. Ihre potentielle Anwendung als Wirkstoffträger ist jedoch begrenzt, da für die Einlagerung nur ein hydrophober Bereich zur Verfügung steht. Multikompartment-Mizellen, bestehend aus einer wasserlöslichen Hülle und einem unterteilten hydrophoben Kern, sind dagegen neuartige und sehr interessante Strukturen für die Nanotechnologie und im speziellen für die Nanobiotechnologie, da sie sich zum Beispiel als Träger für Arznei- und Wirkstoffe eignen. So könnten in die separaten und untereinander nicht mischbaren Kompartimente im Kern der Mizelle verschiedene hydrophobe Wirkstoffe selektiv eingelagert und auch freigesetzt werden, wobei die hydrophile Hülle die Nanostrukturen im physiologischen Medium stabilisiert. Aus diesem Grund wurden in den letzten Jahren verschiedene Strategien für die Herstellung von Multikompartiment-Mizellen vorgeschlagen. Bis jetzt gibt es jedoch nur eine begrenzte Anzahl an Untersuchungen, die sich mit der Morphologie solcher Mizellen befassen und somit ist auch wenig über ihre innere Struktur bekannt. In der vorliegenden Arbeit konzentrieren wir uns auf vier verschiedene Ansätze zur Herstellung von Multikompartiment-Mizellen durch Selbstorganisation in wässriger Lösung. Eine Gemeinsamkeit bei allen Ansätzen ist, das die untersuchten Copolymere einen hydrophoben Kohlenwasserstoff-Block sowie einen Fluorkohlenstoff-Block besitzen. Die Kombination von Kohlenwasserstoff- und Fluorkohlenstoff-Blöcken wurden gewählt, weil solche Segmente in der Regel nicht miteinander kompatibel sind und somit die Aufteilung in separate Domänen begünstigen. Unsere Untersuchungen haben gezeigt, dass die Selbstorganisation der verwendeten Copolymere in wässriger Lösung in drei Fällen zu Multikompartiment-Mizellen führt. Die Form und Größe der Mizellen ist erwartungsgemäß von der Molekülarchitektur und zum Teil auch vom Präparationsweg abhängig. Diese neuartigen, nanostrukturierten Kolloide könnten als Modell und Mimetika für biologische Strukturen wie die von globulären Proteinen fungieren. Sie eröffnen weiterhin interessante Möglichkeiten für Anwendungen in der Nanotechnologie.
T2  - Design and characterization of multicompartment micelles in aqueous solution
KW  - Amphiphile Verbindungen
KW  - Blockcopolymere
KW  - Micelle
KW  - Selbstorganisation
KW  - Kolloides System
KW  - Kolloid / Lösung
KW  - amphiphiles
KW  - block copolymers
KW  - colloids
KW  - micelles
KW  - self-assembly
Y1  - 2005
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-5752
ER  - 
TY  - JOUR
A1  - Garnier, Sebastien
A1  - Laschewsky, Andre
T1  - Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization
JF  - Colloid and polymer science : official journal of the Kolloid-Gesellschaft
N2  - Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.
KW  - macrosurfactants
KW  - block copolymers
KW  - micelles
KW  - inverse micelles
KW  - sulfoxide
Y1  - 2006
U6  - https://doi.org/10.1007/s00396-006-1484-9
SN  - 0303-402X
VL  - 284
SP  - 1243
EP  - 1254
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schreiber, Ulrike
A1  - Hosemann, Benjamin
A1  - Beuermann, Sabine
T1  - 1H,1H,2H,2H-Perfluorodecyl-Acrylate-Containing block copolymers from ARGET ATRP
JF  - Macromolecular chemistry and physics
N2  - Block copolymers of 1H,1H,2H,2H-perfluorodecyl acrylate (AC8) were obtained from ARGET ATRP. To obtain block copolymers of low dispersity the PAC8 block was synthesized in anisole with a CuBr(2)/PMDETA catalyst in the presence of tin(II) 2-ethylhexanoate as a reducing agent. The PAC8 block was subsequently used as macroinitiator for copolymerization with butyl and tert-butyl acrylate carried out in scCO(2). To achieve catalyst solubility in CO(2) two fluorinated ligands were employed. The formation of block copolymers was confirmed by size exclusion chromatography and DSC.
KW  - atom transfer radical polymerization (ATRP)
KW  - block copolymers
KW  - fluoropolymers
KW  - supercritical carbon dioxide
Y1  - 2011
U6  - https://doi.org/10.1002/macp.201000307
SN  - 1022-1352
VL  - 212
IS  - 2
SP  - 168
EP  - 179
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - THES
A1  - Miasnikova, Anna
T1  - New hydrogel forming thermo-responsive block copolymers of increasing structural complexity
T1  - Neue Hydrogel-bildende thermisch schaltbare Blockcopolymere von zunehmender struktureller Komplexität
N2  - This work describes the synthesis and characterization of stimuli-responsive polymers made by reversible addition-fragmentation chain transfer (RAFT) polymerization and the investigation of their self-assembly into “smart” hydrogels. In particular the hydrogels were designed to swell at low temperature and could be reversibly switched to a collapsed hydrophobic state by rising the temperature. Starting from two constituents, a short permanently hydrophobic polystyrene (PS) block and a thermo-responsive poly(methoxy diethylene glycol acrylate) (PMDEGA) block, various gelation behaviors and switching temperatures were achieved. New RAFT agents bearing tert-butyl benzoate or benzoic acid groups, were developed for the synthesis of diblock, symmetrical triblock and 3-arm star block copolymers. Thus, specific end groups were attached to the polymers that facilitate efficient macromolecular characterization, e.g by routine 1H-NMR spectroscopy. Further, the carboxyl end-groups allowed functionalizing the various polymers by a fluorophore. Because reports on PMDEGA have been extremely rare, at first, the thermo-responsive behavior of the polymer was investigated and the influence of factors such as molar mass, nature of the end-groups, and architecture, was studied. The use of special RAFT agents enabled the design of polymer with specific hydrophobic and hydrophilic end-groups. Cloud points (CP) of the polymers proved to be sensitive to all molecular variables studied, namely molar mass, nature and number of the end-groups, up to relatively high molar masses. Thus, by changing molecular parameters, CPs of the PMDEGA could be easily adjusted within the physiological interesting range of 20 to 40°C. A second responsivity, namely to light, was added to the PMDEGA system via random copolymerization of MDEGA with a specifically designed photo-switchable azobenzene acrylate. The composition of the copolymers was varied in order to determine the optimal conditions for an isothermal cloud point variation triggered by light. Though reversible light-induced solubility changes were achieved, the differences between the cloud points before and after the irradiation were small. Remarkably, the response to light differed from common observations for azobenzene-based systems, as CPs decreased after UV-irradiation, i.e with increasing content of cis-azobenzene units. The viscosifying and gelling abilities of the various block copolymers made from PS and PMDEGA blocks were studied by rheology. Important differences were observed between diblock copolymers, containing one hydrophobic PS block only, the telechelic symmetrical triblock copolymers made of two associating PS termini, and the star block copolymers having three associating end blocks. Regardless of their hydrophilic block length, diblock copolymers PS11 PMDEGAn were freely flowing even at concentrations as high as 40 wt. %. In contrast, all studied symmetrical triblock copolymers PS8-PMDEGAn-PS8 formed gels at low temperatures and at concentrations as low as 3.5 wt. % at best. When heated, these gels underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurs. The gel-sol transition shifted to markedly higher transition temperatures with increasing length of the hydrophilic inner block. This effect increased also with the number of arms, and with the length of the hydrophobic end blocks. The mechanical properties of the gels were significantly altered at the cloud point and liquid-like dispersions were formed. These could be reversibly transformed into hydrogels by cooling. This thesis demonstrates that high molar mass PMDEGA is an easily accessible, presumably also biocompatible and at ambient temperature well water-soluble, non-ionic thermo-responsive polymer. PMDEGA can be easily molecularly engineered via the RAFT method, implementing defined end-groups, and producing different, also complex, architectures, such as amphiphilic triblock and star block copolymers, having an analogous structure to associative telechelics. With appropriate design, such amphiphilic copolymers give way to efficient, “smart” viscosifiers and gelators displaying tunable gelling and mechanical properties.
N2  - Diese Arbeit befasst sich mit der RAFT-vermittelten Synthese und Charakterisierung von stimuli-empfindlichen Polymeren und ihrer Selbstorganisation zu „intelligenten” Hydrogelen. Die Hydrogele wurden so entwickelt, dass sie bei niedrigen Temperaturen stark quellen, bei Temperaturerhöhung jedoch reversibel in einem hydrophoben, kollabierten Zustand umgewandelt werden. Mit dem permanent hydrophoben Polystyrol (PS) und dem hydrophilen, thermisch schaltbaren Poly(methoxy-diethylen¬glycol-acrylat) (PMDEGA) als Bausteine, wurden unterschiedliche Gelierungsverhalten und thermische Übergangstemperaturen erreicht. Zur Synthese von Diblock-, symmetrischen Triblock- und dreiarmigen Sternblock-Copolymeren wurden neue funktionelle Kettenüberträger entwickelt. Diese gestatteten es, tert-butyl Benzoeester und Benzoesäure Endgruppen in die Polymere einzubauen, die einerseits eine effiziente Analyse mittels Routine 1H-NMR und darüber hinaus eine spätere Funktionalisierung der Endgruppen mit einer Fluoreszenzsonde ermöglichten. Da über PMDEGA kaum Daten vorlagen, wurde der Einfluss von Molekulargewicht, Endgruppen und Architektur auf das thermo-responsive Verhalten untersucht. Die speziellen Kettenüberträger ermöglichten es, gezielt hydrophobe wie hydrophile Endgruppen in die Polymere einzuführen. Die Trübungspunkte der wässerigen Lösungen von PMDEGA zeigten sich bis zu relativ hohen molaren Massen abhängig gegenüber allen untersuchten Variablen, nämlich dem Molekulargewicht, der Art und Zahl von Endgruppen. Durch Variation der diversen Parameter ließ sich die Schalttemperatur von PMDEGA in physiologisch relevanten Temperaturbereich von 20 bis 40 °C einstellen. Um die Polymere für einen zweiten Stimulus, nämlich Licht, empfindlich zu machen, wurden Azobenzol-funktionalisierte Acrylate synthetisiert und statistisch mit MDEGA copolymerisiert. Die Zusammensetzung der Polymeren wurde variiert und das isotherme Schalten der Löslichkeit durch Licht untersucht. Obwohl ein reversibles Schalten erreicht wurde, waren die Unterschiede zwischen den Trübungstemperaturen von UV-Licht bestrahlten und unbestrahlten Proben nur gering. Interessanterweise senkte die UV-Bestrahlung, d.h. ein erhöhter Gehalt von cis-Azobenzol-Gruppen, die Trübungstemperaturen herab. Dies ist genau umgekehrt als für azobenzolbasierten Systeme klassisch beschrieben. Die Gelbildung der verschiedenen Blockcopolymere von PS und PMDEGA wurde mittels Rheologie untersucht. Dabei traten deutliche Unterschiede auf, zwischen dem Gelierungsverhalten der Diblockcopolymere, die nur einen PS Block enthalten, dem der symmetrischen Triblockcopolymere, die zwei assoziative PS Endblöcken besitzen, und dem der Sternpolymere, die drei assoziative PS Blöcke aufweisen. Unabhängig von der Länge des hydrophilen Blockes, bilden Diblockcopolymere des Typs PS11-PMDEGAn keine Gele, sondern selbst bei hohen Konzentrationen von 40 Gew. % Lösungen. Im Gegensatz dazu bildeten die Triblockcopolymere des Typs PS8-PMDEGAn-PS8 Gele bei niedrigen Temperaturen, vereinzelt schon ab 3.5 wt. %. Mit steigender Temperatur, tritt bereits unterhalb des Trübungspunktes für diese Systeme ein Gel-Sol Übergang auf. Der Gel-Sol Übergang bewegt sich zu höheren Temperaturen mit steigende Länge des hydrophilen inneren Blocks. Dieser Trend verstärkt sich mit zunehmender Anzahl von Endblöcken und deren Länge. An der Trübungstemperatur veränderten sich die mechanischen Eigenschaften aller Gele signifikant und die gebildeten flüssigen Dispersionen ließen sich reversibel beim Abkühlen wieder zu Gel schalten. Diese Arbeit, zeigt dass PMDEGA ein bei niedrigen Temperaturen gut wasserlösliches, nicht-ionisches, thermisch-schaltbares und wahrscheinlich biokompatibles Polymer ist. PMDEGA liest sich einfach mittels den RAFT-Verfahren molekular maßschneiden, mit spezifischen Endgruppen und komplexen Polymerarchitekturen. Solche amphiphilen Triblock- und Sternblock-Copolymeren hoher Molmasse, wirken als assoziative Telechele. Daher eigenen sich bei entsprechendem Design diese amphiphilen Blockcopolymere als effiziente Verdicker und Gelbildner mit einstellbaren mechanischen und thermischen Eigenschaften.
KW  - Blockcopolymere
KW  - Selbstorganisation
KW  - thermisch schaltbar
KW  - LCST
KW  - RAFT
KW  - block copolymers
KW  - self-assembly
KW  - thermoresponsive
KW  - LCST
KW  - RAFT
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-59953
ER  - 
TY  - JOUR
A1  - Weiss, Jan
A1  - Wienk, Hans
A1  - Boelens, Rolf
A1  - Laschewsky, André
T1  - Block copolymer micelles with an intermediate star-/flower-like structure studied by H-1 NMR relaxometry
JF  - Macromolecular chemistry and physics
N2  - H-1 NMR relaxation is used to study the self-assembly of a double thermoresponsive diblock copolymer in dilute aqueous solution. Above the first transition temperature, at which aggregation into micellar structures is observed, the trimethylsilyl (TMS)-labeled end group attached to the shell-forming block shows a biphasic T-2 relaxation. The slow contribution reflects the TMS groups located at the periphery of the hydrophilic shell, in agreement with a star-like micelle. The fast T-2 contribution corresponds to the TMS groups, which fold back toward the hydrophobic core, reflecting a flower-like micelle. These results confirm the formation of block copolymer micelles of an intermediate nature (i.e., of partial flower-like and star-like character), in which a part of the TMS end groups folds back to the core due to hydrophobic interactions.
KW  - block copolymers
KW  - polymer micelles
KW  - relaxation NMR spectroscopy
KW  - self-assembly
KW  - thermoresponsive materials
Y1  - 2014
U6  - https://doi.org/10.1002/macp.201300753
SN  - 1022-1352
SN  - 1521-3935
VL  - 215
IS  - 9
SP  - 915
EP  - 919
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Brosnan, Sarah M.
A1  - Schlaad, Helmut
A1  - Antonietti, Markus
T1  - Aqueous Self-Assembly of Purely Hydrophilic Block Copolymers into Giant Vesicles
JF  - Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition
N2  - Self-assembly of macromolecules is fundamental to life itself, and historically, these systems have been primitively mimicked by the development of amphiphilic systems, driven by the hydrophobic effect. Herein, we demonstrate that self-assembly of purely hydrophilic systems can be readily achieved with similar ease and success. We have synthesized double hydrophilic block copolymers from polysaccharides and poly(ethylene oxide) or poly(sarcosine) to yield high molar mass diblock copolymers through oxime chemistry. These hydrophilic materials can easily assemble into nanosized (<500nm) and microsized (>5m) polymeric vesicles depending on concentration and diblock composition. Because of the solely hydrophilic nature of these materials, we expect them to be extraordinarily water permeable systems that would be well suited for use as cellular mimics.
KW  - block copolymers
KW  - polymersomes
KW  - polysaccharides
KW  - self-assembly
KW  - vesicles
Y1  - 2015
U6  - https://doi.org/10.1002/anie.201502100
SN  - 1433-7851
SN  - 1521-3773
VL  - 54
IS  - 33
SP  - 9715
EP  - 9718
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Liedel, Clemens
A1  - Lewin, Christian
A1  - Tsarkova, Larisa
A1  - Böker, Alexander
T1  - Reversible Switching of Block Copolymer Nanopatterns by Orthogonal Electric Fields
JF  - Small
N2  - It is demonstrated that the orientation of striped patterns can be reversibly switched between two perpendicular in-plane orientations upon exposure to electric fields. The results on thin films of symmetric polystyrene-block-poly(2-vinyl pyridine) polymer in the intermediate segregation regime disclose two types of reorientation mechanisms from perpendicular to parallel relative to the electric field orientation. Domains orient via grain rotation and via formation of defects such as stretched undulations and temporal phase transitions. The contribution of additional fields to the structural evolution is also addressed to elucidate the generality of the observed phenomena. In particular solvent effects are considered. This study reveals the stabilization of the meta-stable in-plane oriented lamella due to sequential swelling and quenching of the film. Further, the reorientation behavior of lamella domains blended with selective nanoparticles is addressed, which affect the interfacial tensions of the blocks and hence introduce another internal field to the studied system. Switching the orientation of aligned block copolymer patterns between two orthogonal directions may open new applications of nanomaterials as switchable electric nanowires or optical gratings.
KW  - alignments
KW  - block copolymers
KW  - electric fields
KW  - reorientation
KW  - solvent vapor annealing
KW  - polymers
Y1  - 2015
U6  - https://doi.org/10.1002/smll.201502259
SN  - 1613-6810
SN  - 1613-6829
VL  - 11
IS  - 45
SP  - 6058
EP  - 6064
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Wagner, Tom
A1  - Lazar, Jaroslav
A1  - Schnakenberg, Uwe
A1  - Böker, Alexander
T1  - In situ Electrothemical Impedance Spectroscopy of Electrostatically Driven Selective Gold Nanoparticle Adsorption on Block Copolymer Lamellae
JF  - Trials
N2  - Electrostatic attraction between charged nano particles and oppositely charged nanopatterned polymeric films enables tailored structuring of functional nanoscopic surfaces. The bottom-up fabrication of organic/inorganic composites for example bears promising potential toward cheap fabrication of catalysts, optical sensors, and the manufacture of miniaturized electric circuitry. However, only little is known about the time-dependent adsorption behavior and the electronic or ionic charge transfer in the film bulk and at interfaces during nanoparticle assembly via electrostatic interactions. In situ electrochemical impedance spectroscopy (EIS) in combination with a microfluidic system for fast and reproducible liquid delivery was thus applied to monitor the selective deposition of negatively charged gold nanoparticles on top of positively charged poly(2-vinylpyridinium) (qP2VP) domains of phase separated lamellar poly(styrene)-block-poly(2-vinylpyridinium) (PS-b-qP2VP) diblock copolymer thin films. The acquired impedance data delivered information with respect to interfacial charge alteration, ionic diffusion, and the charge dependent nanoparticle adsorption kinetics, considering this yet unexplored system. We demonstrate that the selective adsorption of negatively charged gold nanoparticles (AuNPs) on positively charged qP2VP domains of lamellar PS-b-qP2VP thin films can indeed be tracked by EIS. Moreover, we show that the nanoparticle adsorption kinetics and the nanoparticle packing density are functions of the charge density in the qP2VP domains.
KW  - impedance spectroscopy
KW  - block copolymers
KW  - nanoparticles
KW  - electrostatics
KW  - adsorption kinetics
Y1  - 2016
U6  - https://doi.org/10.1021/acsami.6b07708
SN  - 1944-8244
VL  - 8
SP  - 27282
EP  - 27290
PB  - American Chemical Society
CY  - Washington
ER  - 
TY  - JOUR
A1  - Wagner, Tom
A1  - Oded, Meirav
A1  - Shenhar, Roy
A1  - Böker, Alexander
T1  - Two-dimensionally ordered AuNP array formation via microcontact printing on lamellar diblock copolymer films
JF  - Polymers for advanced technologies
N2  - The construction of nano-sized, two-dimensionally ordered nanoparticle (NP) superstructures is important for various advanced applications such as photonics, sensing, catalysis, or nano-circuitry. Currently, such structures are fabricated using the templated organization approach, in which the templates are mainly created by photo-lithography or laser-lithography and other invasive top-down etching procedures. In this work, we present an alternative bottom-up preparation method for the controlled deposition of NPs into hierarchical structures. Lamellar polystyrene-block-poly(2-vinylpyridinium) thin films featuring alternating stripes of neutral PS and positively charged P2VP domains serve as templates, allowing for the selective adsorption of negatively charged gold NPs. Dense NP assembly is achieved by a simple immersion process, whereas two-dimensionally ordered arrays of NPs are realized by microcontact printing (mu CP), utilizing periodic polydimethylsiloxane wrinkle grooves loaded with gold NPs. This approach enables the facile construction of hierarchical NP arrays with variable geometries. Copyright (C) 2016 John Wiley & Sons, Ltd.
KW  - block copolymers
KW  - electrostatic assembly
KW  - microcontact printing
KW  - gold nanoparticles
Y1  - 2017
U6  - https://doi.org/10.1002/pat.3853
SN  - 1042-7147
SN  - 1099-1581
VL  - 28
SP  - 623
EP  - 628
PB  - Wiley
CY  - Hoboken
ER  -