TY - JOUR A1 - Munoz, Gerard A1 - Weckmann, Ute A1 - Pek, Josef A1 - Kovacikova, Svetlana A1 - Klanica, Radek T1 - Regional two-dimensional magnetotelluric profile in West Bohemia/Vogtland reveals deep conductive channel into the earthquake swarm region JF - Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth N2 - The West Bohemia/Vogtland region, characterized by the intersection of the Eger (Ohre) Rift and the Marianske Lazne fault, is a geodynamically active area exhibiting repeated occurrence of earthquake swarms, massive CO2 emanations and mid Pleistocene volcanism. The Eger Rift is the only known intra-continental region in Europe where such deep seated, active lithospheric processes currently take place. We present an image of electrical resistivity obtained from two-dimensional inversion of magnetotelluric (MT) data acquired along a regional profile crossing the Eger Rift. At the near surface, the Cheb basin and the aquifer feeding the mofette fields of Bublak and Hartousov have been imaged as part of a region of very low resistivity. The most striking resistivity feature, however, is a deep reaching conductive channel which extends from the surface into the lower crust spatially correlated with the hypocentres of the seismic events of the Novy Kostel Focal Zone. This channel has been interpreted as imaging a pathway from a possible mid-crustal fluid reservoir to the surface. The resistivity model reinforces the relation between the fluid circulation along deep-reaching faults and the generation of the earthquakes. Additionally, a further conductive channel has been revealed to the south of the profile. This other feature could be associated to fossil hydrothermal alteration related to Mytina and/or Neualbenreuth Maar structures or alternatively could be the signature of a structure associated to the suture between the Saxo-Thuringian and Tepla-Barrandian zones, whose surface expression is located only a few kilometres away. KW - Magnetotellurics KW - West Bohemia KW - Vogtland KW - Earthquake swarm KW - Conductive channel KW - Fluids Y1 - 2018 U6 - https://doi.org/10.1016/j.tecto.2018.01.012 SN - 0040-1951 SN - 1879-3266 VL - 727 SP - 1 EP - 11 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Petersen, Gesa Maria T1 - Source array and receiver array analysis of Vogtland/ West Bohemia earthquake clusters T1 - Untersuchung von Erdbebenclustern im Vogtland/ Westböhmen durch Quell- und Empfängerarrays N2 - Die Region Vogtland/ West Böhmen im Grenzgebiet zwischen Deutschland und Tschechien ist bekannt für ihre geologische Aktivität. Holozäner Vulkanismus, Gasaustritte an Mofetten und Quellen und wiederkehrende Erdbebenschwärme sind Ausdruck geodynamischer Prozesse im Untergrund. Während des Erdbebenschwarms 2008/2009 in Nový Kostel installierte die Universität Potsdam ein temporäres Array in Rohrbach, in einer Epizentraldistanz von etwa 10 km und mit einer Aperatur von etwa 0.75 km. 22 Erdbeben wurden für Quellarray- beam forming ausgewählt. Quellarrays sind örtliche Cluster von Erdbeben, die von einer Empfängerstation aufgezeichnet werden. Wegen der Reziprozität der Green’schen Funktionen können diese in ähnlicher Weise genutzt werden wie Empfängerarrays, bei denen mehrere Stationen ein einzelnes Beben aufzeichnen. Die Kreuzkorrelationskoeffizienten aller Beben des Quellarrays, aufgezeichnet an einer einzelnen Station, sind in der Regel höher als für einzelne Ereignisse, die an allen Stationen des Empfängerarrays aufgezeichnet wurden. Dies deutet hinsichtlich der aufgelösten Frequenzen auf einen heterogenen Untergrund unter den Array-Stationen und ein vergleichsweise homogenes Quellarray-Volumen hin. Beam forming wurde mit den horizontalen und vertikalen Spuren aller Quellarray-Beben, aufgezeichnet auf allen 11 Stationen des Empfängerarrays, durchgeführt. Die Ergebnisse wurden im Hinblick auf Konversionen und reflektierte Phasen analysiert. Während die theoretische Richtung der direkten P-Welle im Falle der Quellarray-Aufzeichnungen gut übereinstimmt, wird eine Empfängerarray-Missweisung von 15° bis 25° beobachtet. Eine PS Phase, die der direkten P Phase folgt und eine mögliche SP Phase, die kurz vor der direkten S-Phase ankommt, wurden auf den summierten Spuren mehrerer Stationen interpretiert. Aus der Betrachtung der Laufzeiten resultiert eine Konversionstiefe von 0.6-0.9 km Tiefe. Ein zweites Quellarray, bestehend aus 12 tieferen Beben wurde zusätzlich analysiert, um eine nach ca. 0.85 s ausschließlich auf den Aufzeichnungen tieferer Beben auftretende Strukturphase zu deuten. Zusätzlich zum beam forming wurden zwei Lokalisierungsmethoden von Reflexionen und Konversionen für einfach reflektierte/konvertierte Phasen entwickelt und zur Auswertung verwendet. Während die erste, analytische Methode eine homogene Geschwindigkeit entlang des Laufwegs annimmt, wird in der zweiten Methode eine 3-D-Rastersuche ausgeführt, in der ein 1-D-Geschwindigkeitsmodell verwendet wird. Auf Grund der eindeutigen beam forming Ergebnisse und der hohen Ähnlichkeit der Wellenformen der Erdbeben, die für das Quellarray genutzt wurden, bieten Quellarrays bestehend aus Mikrobeben aus dem untersuchten Gebiet gute Möglichkeiten zur Untersuchung von Krustenstrukturen. N2 - The Vogtland, located at the border region between the Czech Republic and Germany, is known for Holocene volcanism, gas and fluid emissions as well as for reoccurring earthquake swarms, pointing towards a high geodynamic activity. During the earthquake swarm in 2008/2009, a temporary array was installed close to Rohrbach (Germany), at an epicentral distance of about 10 km from the Nový Kostel focal zone (aperture ~0.75 km). 22 events of the recorded swarm were selected to set up a source array. Source arrays are spatially clustered earthquakes, which can be used in a similar manner as receiver array recordings of single events (Green’s functions reciprocity). The application of array seismology techniques like beam forming requires similar waveforms and precisely known origin times and locations. The resemblance of waveforms was assured by visual selection of events and quantified with the calculation of cross-correlation coefficients. We observed that the different events recorded at a single station generally show greater resemblances than the recordings of one event at all stations of the receiver array. This indicates a heterogeneous subsurface beneath the receiver array and a comparably homogeneous source array volume with respect to the frequency-dependent resolution of both arrays. Beam forming was applied on the Z, N and E component recordings of the source array events at 11 stations, and the results were analysed with respect to converted or reflected crustal phases. While the theoretical back azimuth of the direct phases match the beam forming results in case of the source array analysis, in case of receiver array beam forming derivations of 15°-25° are observed. PS phases, closely following the direct P phase and presumably SP phases, arriving shortly before the direct S phase can be observed on several stations. Based on the time differences to the direct P and S phases we inferred a conversion depth of about 0.6-0.9 km. A second deeper source array was set up in order to interpret a structural phase arriving 0.85 s after the direct P phase on records of deeper events only. Additionally to the source array beam forming method an analytical method with a fixed medium velocity and a grid search method, both for determining conversion/ reflection locations of phases traveling off the direct line between source and receiver array, were developed and applied to other observed phases. In conclusion, we think that the distinct beam forming results along with the striking waveform resemblance reveal the opportunities of using source arrays consisting of small swarm events for the analysis of crustal structures. KW - seismology KW - Vogtland KW - West Bohemia KW - source array KW - beam forming KW - earthquake swarms KW - Seismologie KW - Vogtland KW - Westböhmen KW - Quellarray KW - Beamforming KW - Erdbebenschwärme KW - Schwarmbeben Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-406671 ER - TY - THES A1 - Rößler, Dirk T1 - Retrieval of earthquake source parameters in inhomogeneous anisotropic mediawith application to swarm events in West Bohemia in 2000 T1 - Bestimmung von Erdbebenparametern in inhomogenen anisotropen Medien mit Anwendung auf Schwarmbeben im Vogtland im Jahr 2000 N2 - Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting. N2 - Erdbeben entstehen durch plötzlichen Sprödbruch des Gesteins, meist als Scherbruch entlang einer Bruchfläche. Daneben werden für einige Beben v.a. in vulkanischen Gebieten auch Mechanismen beobachtet, die scheinbar vom Modell des Scherbruches abweichen. Ursachen dafür beinhalten komplexe Bruchgeometrien und tensile Erdbeben. Bei tensilen Erdbeben kommt es während des Bruchs zum Öffnen oder Schließen der Bruchfläche und damit zu Volumenänderungen. Erdbeben mit tensilen Anteilen stehen wahrscheinlich oft im Zusammenhang mit Fluiden, welche zur Durckänderung im Porenraum von Gesteinen und damit zum Auslösen des Bebens führen. Sie wurden auch im Vogtland während eines Erdbebenschwarms im Jahr 1997 beobachtet. Die Beurteilung und sichere Bestimmung tensiler Anteile von Erdbeben sind Ziel und Gegenstand dieser Arbeit. Bei Standardverfahren zur Bestimmung von Erdbebenmechanismen werden isotrope Gesteinseigenschaften angenommen. Momententensoren beschreiben dabei Kräfte, die das abgestrahlte Wellenfeld erklären. Allerdings wird seismische Anisotropie, d.h. Richtungsabhängigkeit elastischer Eigenschaften, in der Erdkruste und im Mantel wie z.B. im Vogtland beobachtet. Anisotropie bewirkt im Vergleich zu isotropen Medien Veränderungen der Wellenamplituden und -polariserungen sowie das Aufspalten von Scherwellen. In der vorliegenden Arbeit werden daher der Einfluss seismischer Anisotropie auf wahre oder scheinbar auftretende tensile Quellanteile untersucht und Erdbebenmechanismen unter Berücksichtigung seismischer Anisotropie bestimmt. Es wird gezeigt, dass Momententensoren und Abstrahlmuster von Scherbrüchen in anisotropen Medien denen von tensilen Brüchen in isotropen Medien ähneln können. Umgekehrt treten Ähnlichkeiten tensiler Beben in anisotropen Gesteinen mit Scherbrüchen in isotropen Medien auf. Damit existieren Mehrdeutigkeiten beobachteter tensiler Quellanteile. Die Effekte von Anisotropie hängen von der Orientierung des Bruches und vom Grad der Anisotropie ab. Außerdem beeinflusst Anisotropie das Moment eines Bebens. Herdflächenorientierungen können auch dann verlässlich bestimmt werden, wenn man Isotropie statt Anisotropie annimmt und die Spektren von Kompressionswellen verwendet. Bei Hinzunahme der Spektren von Scherwellen können Uneindeutigkeiten auftreten. Abgeleitete Momententensoren zeigen systematische Artefakte. Beobachtungen tensiler Quellanteile von Beben im Vogtland im Jahr 1997 können nicht allein durch moderate Anisotropie erklärt werden. Weiterhin wurden früher bestimmte Momententensoren induzierter Beben nahe der Kontinentalen Tiefbohrung, Bayern, unter Annahme anisotroper Parameter reinterpretiert. Die Beben werden einheitlich als Scherbrüche charakterisiert, obwohl deren Momententensoren tensile Bestandteile enthalten, die als scheinbar angesehen werden. Die Resultate unterstreichen die Notwendigkeit, seismische Anisotropie zu berücksichtigen, um tensile Komponenten von Erdbeben eindeutig zu bestimmen. Ein daher neu entwickelter Inversionsalgorithmus wurde getestet und erfolgreich auf 112 Erdbeben der letzten intensiven Schwarmepisode im Jahr 2000 im Vogtland an der deutsch-tschechischen Grenze angewandt. Die Herdparameter wurden unter Verwendung isotroper und anisotroper Geschwindigkeitsmodelle ermittelt. Die Beben zeigen Lokalmagnituden zwischen 1,6 und 3,2. Sie weisen zueinander ähnliche Herdflächenlösungen mit linkslateralem Versatz auf steil einfallenden, etwa Nord-Süd orientierten Bruchflächen auf. Die Fallwinkel nehmen oberhalb 8,4km Tiefe ab. Für über 60% der betrachteten Erdbeben werden tensile Quellanteile mit Volumenvergrößerung beobachtet. Die tensilen Komponenten zeigen Abhängigkeiten von Herdzeit und -ort. Sie sind zu Beginn des Schwarms sowie in Tiefen unterhalb 8,4km besonders signifikant und nehmen später an Bedeutung ab. Abgeleitete Hauptspannungsachsen enthalten P Achsen mit nordwestlicher und T Achsen mit südwestlicher Streichrichtung. Sie ähneln denen in Mitteleuropa. Es werden tiefenabhängige Fallwinkel beobachtet. Die Änderungen erfolgen für die P Achsen graduell von 50° hin zu flacheren Fallwinkeln bei tieferen Beben. Sie erfolgen jedoch abrupt für die T Achsen von etwa 8° oberhalb einer Tiefe von etwa 8,4km zu 21° einfallend unterhalb dessen. Mit dieser Arbeit werden erstmals zeitliche und räumliche Veränderungen tensiler Quellanteile und Spannungszustände im Vogtland für Erdbeben im Jahr 2000 beobachtet. Diese haben auch dann Bestand, wenn seismische Anisotropie berücksichtigt wird. Sie können durch Fluide erklärt werden, die in die Bruchflächen eindringen. KW - Seismologie KW - Momententensor KW - Anisotropie KW - Erdbeben KW - Wellenausbreitung KW - Vogtland KW - Schwarmbeben KW - tensile Anteile KW - Hauptspannungsachse KW - earthquake swarm KW - anisotropy KW - tensile earthquakes KW - moment tensor KW - West Bohemia Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7758 ER - TY - GEN A1 - Rößler, Dirk A1 - Hiemer, Stephan A1 - Bach, Christoph A1 - Delavaud, Elise A1 - Krüger, Frank A1 - Ohrnberger, Matthias A1 - Sauer, David A1 - Scherbaum, Frank A1 - Vollmer, Daniel T1 - Small-aperture seismic array monitors Vogtland earthquake swarm in 2008/09 N2 - The most recent intense earthquake swarm in the Vogtland lasted from 6 October 2008 until January 2009. Greatest magnitudes exceeded M3.5 several times in October making it the greatest swarm since 1985/86. In contrast to the swarms in 1985 and 2000, seismic moment release was concentrated near swarm onset. Focal area and temporal evolution are similar to the swarm in 2000. Work hypothysis: uprising upper-mantle fluids trigger swarm earthquakes at low stress level. To monitor the seismicity, the University of Potsdam operated a small aperture seismic array at 10 km epicentral distance between 18 October 2008 and 18 March 2009. Consisting of 12 seismic stations and 3 additional microphones, the array is capable of detecting earthquakes from larger to very low magnitudes (M<-1) as well as associated air waves. We use array techniques to determine properties of the incoming wavefield: noise, direct P and S waves, and converted phases. KW - Vogtland KW - Erdbebenschwarm 2008 KW - Arrayseismologie KW - Vogtland KW - West Bohemia KW - earthquake swarm KW - array seismology Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-29185 ER - TY - JOUR A1 - Rößler, Dirk A1 - Krüger, Frank A1 - Rümpker, Georg A1 - Psencik, Ivan T1 - Tensile source components of swarm events in West Bohemia in 2000 by considering seismic anisotropy N2 - Earthquake swarms occur frequently in West Bohemia, Central Europe. Their occurrence is correlated with and propably triggered by fluids that escape on the earth's surface near the epicentres. These fluids raise up periodically from a seemingbly deep-seated source in the upper mantle. Moment tensors for swarm events in 1997 indicate tensile faulting. However, they were determined under assumption of seismic isotropy although anisotropy can be observed. Anisotropy may obscure moment tensors and their interpretation. In 2000, more than 10,000 swarm earthquakes occurred near Novy Kostel, West Bohemia. Event triggering by fluid injection is likely. Activity lasted from 28/08 until 31/12/00 (9 phases) with maximum ML=3.2. High quality P-wave seismograms were used to retrieve the source mechanisms for 112 events between 28/08/00 and 30/10/00 using > 20 stations. We determine the source geometry using a new algorithm and different velocity models including anisotropy. From inversions of P waves we observe ML<3.2, strike-slip events on steep N-S oriented faults with additional normal or reverse components. Tensile components seem to be evident for more than 60% of the processed swarm events in West Bohemia during the phases 1-7. Being most significant at great depths and at phases 1-4 during the swarm they are time and location dependent. Although tensile components are reduced when anisotropy is assumed they persist and seem to be important. They can be explained by pore-pressure changes due to the injection of fluids that raise up. Our findings agree with other observations e.g. correlation of fluid transport and seismicity, variations in b-value, forcing rate, and in pore pressure diffusion. Tests of our results show their significance. KW - Seismologie KW - Erbeben KW - Momententensor KW - Anisotropie KW - Vogtland KW - Seismology KW - tensile earthquake KW - moment tensor KW - anisotropy KW - West Bohemia Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-12975 ER -