TY - THES A1 - Czarnecki, Maciej T1 - Untersuchungen zur Synthese von (1,7)-Naphthalenophanen über eine Dehydro-DIELS-ALDER-Reaktion als Schlüsselschritt T1 - Investigations towards the synthesis of (1,7)-Naphthalenophanes via a Dehydro-DIELS-ALDER reaction as key step BT - synthetisch-technische Aspekte, Eigenschaften und Anwendungen BT - synthetic-technical aspects, properties and applications N2 - Die vorliegende Dissertation behandelt drei thematische Schwerpunkte. Im Ergebnisteil steht die chemische Synthese von sogenannten (1,7)-Naphthalenophanen im Vordergrund, die zur Substanzklasse von Cyclophanen gehören. Während zahlreiche Synthesemethoden Strategien zum Aufbau von Ringsystemen (wie z. B. von Naphthalenophanen) verfolgen, die Teil einer bereits existierenden aromatischen Struktur der Ausgangsverbindung sind, nutzen nur wenige Ansätze Reaktionen, die einen Ringschluss zum gewünschten Produkt erst im Zuge der Synthese etablieren. Eine Benzanellierung, die eine besondere Aufmerksamkeit im Arbeitskreis erfahren hat, ist die Dehydro-DIELS-ALDER-Reaktion (DDA-Reaktion). Im Rahmen dieser Arbeit konnte gezeigt werden, dass zwölf ausgewählte (1,7)-Naphthalenophane, die teilweise ringgespannt und makrozyklisch aufgebaut waren, mithilfe einer photochemischen Variante der DDA-Reaktion (PDDA-Reaktion) zugänglich gemacht werden können. Die Versuche, auf thermischem Wege (TDDA-Reaktion) (1,7)-Naphthalenophane herzustellen, misslangen. Die außergewöhnliche Reaktivität der Photoreaktanten konnte mithilfe quantenchemischer Berechnungen durch eine gefaltete Grundzustandsgeometrie erklärt werden. Darüber hinaus wurden Ringspannungen und strukturelle Spannungsindikatoren der relevanten Photoprodukte ermittelt und Trends in Abhängigkeit der Linkerlänge in den NMR-Spektren der Zielverbindungen ermittelt sowie diskutiert. Zudem zeigte eine Variation am Chromophor (Acyl-, Carbonsäure- und Carbonsäureester) der Photoreaktanten bei der Bestrahlung in Dichlormethan eine vergleichbare Photokinetik und -reaktivität. Der zweite Abschnitt dieser Dissertation ist dem Design und der Entwicklung zweier Photoreaktoren für UV-Anwendungen im kontinuierlichen Durchfluss gewidmet, da photochemische Transformationen bekanntermaßen in ihrer Skalierbarkeit limitiert sind. Im ersten Prototyp konnten mittels effizienter Parallelschaltung mit bis zu drei UV-Lampen (𝜆𝜆 = 254, 310 und 355 nm) Produktmaterialmengen von bis zu n = 188 mmol anhand eines ausgewählten Fallbeispiels erreicht werden. Im konstruktionstechnisch stark vereinfachten zweiten Photoreaktor wurden alle quarzhaltigen Elemente gegen günstigeres PLEXIGLAS® ersetzt. Das Resultat waren identische Raum-Zeit-Ausbeuten in Bezug auf das zuvor gewählte Synthesebeispiel. Demnach bietet die UV-Photochemie im kontinuierlichen Durchfluss Vorteile gegenüber der traditionellen Bestrahlung im Tauchreaktor. Hinsichtlich Reaktionszeit, Produktausbeuten und Lösemittelverbrauch ist sie synthetisch weit überlegen. Im letzten Abschnitt der Arbeit wurden diese Erkenntnisse genutzt, um biomedizinisch und pharmakologisch vielversprechende 1-Arylnaphthalen-Lignane mittels einer intramolekularen PDDA-Reaktion (IMPDDA-Reaktion) als Schlüsselschritt herzustellen. Hierzu wurden drei Konzepte erarbeitet und in der Totalsynthese von drei ausgewählten Zielstrukturen auf Basis des 1-Arylnaphthalengrundgerüsts realisiert. N2 - The content of this doctoral thesis focusses on three major thematic aspects. The first half of this work is devoted to the chemical synthesis of so-called (1,7)-naphthalenophanes, which are classified in the group of cyclophanes. Several synthetic methods consist of strategies, which are often part of an already existing aromatic unit (e.g. as in naphthalenophanes). Basic approaches where the aromatic moiety is formed during the reaction in terms of a ring-closing reaction can be rarely found. A powerful benzoanellation method which has proven suitability in the working group is the Dehydro-DIELS-ALDER reaction (DDA reaction). As part of this work twelve selected examples of partially strained and macrocyclic (1,7)-naphthalenophanes could be obtained via a photochemical variant of the DDA reaction (PDDA reaction). In contrast the thermal version (TDDA reaction) for the preparation of (1,7)-naphthalenophanes failed. The extraordinary reactivity of photo reactants originated from a folded ground-state geometry is caused by π-stacking as calculated by quantum chemical methods. In addition, ring strains and structural strain indicators of relevant photo products were calculated as well. Besides that, trends inside the corresponding product NMR spectra in dependence of the linker length were identified and discussed. Moreover, a variation of the chromophoric group (acyl, carboxylic acid and carboxylic acid ester) in the photo reactants showed comparable photokinetics and -reactivities after being irradiated in dichloromethane. The second part dealt with the design and development of two continuous-flow reactors for applications in the UV-range, since photochemical transformations are limited by their scalability. The first prototype reactor could generate via an internal numbering-up approach consisting of three lamps (𝜆𝜆 = 254, 310 und 355 nm) product material with up to n = 188.0 mmol as a selected test system showed. The second flow UV-reactor was constructionally simplified by exchanging all quarz containing elements by PLEXIGLAS®. As a result, identical space-time-yields could be obtained with the same chosen test substrate. Continuous-flow UV-photochemistry can therefore be regarded as advantageous over traditional batch photochemistry regarding reaction times, product yields and solvent waste. As a result, the last section provided insights into the synthesis of biomedically and pharmacologically relevant 1-arylnaphthalene lignanes based on an intramolecular PDDA reaction (IMPDDA reaction) as key step. For this purpose, three synthesis concepts were elaborated and applied in the total synthesis of three selected natural products consisting of an 1-arylnaphthalene skeleton. KW - Photochemie KW - Durchflusschemie KW - 1-Arylnaphthalen-Lignane KW - photochemistry KW - flow chemistry KW - 1-arylnaphthalene lignanes Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-508670 ER - TY - THES A1 - Fischer, Thomas T1 - Lichtinduzierte Orientierungsprozesse in Azobenzen-Polymeren T1 - Lightinduced orientation processes in azobenzene polymers N2 - Die Beeinflussung optischer Eigenschaften durch Bestrahlung stellt eine Grundlage für die Herstellung anisotroper optischer Komponenten dar. In dünnen Schichten von Azobenzen-Polymeren kann optische Anisotropie durch linear polarisierte Bestrahlung induziert oder modifiziert werden. Ziel der Arbeit war es, wesentliche Struktur-Eigenschafts-Beziehungen zum Prozess der Photoorientierung zu erarbeiten, um so eine Optimierung der Materialien für verschiedene Anwendungen ermöglichen. In isotropen Schichten flüssigkristalliner und amorpher Azobenzen-Polymeren wird das Ausmaß der induzierten optischen Anisotropie günstig durch eine Donor/Akzeptor-Substitution in 4,4'-Position beeinflusst. Die Induktionsgeschwindigkeit ist in Schichten flüssigkristalliner Polymeren deutlich geringer, jedoch lassen sich höhere Werte der Doppelbrechung und des Dichroismus erreichen. In Copolymeren bewirkt die Photoorientierung der Azobenzen-Seitengruppen eine kooperative Orientierung von formanisotropen Seitengruppen. Die Mesogenität der nicht-photochromen Seitengruppen erhöht das Ausmaß der induzierten optischen Anisotropie. Die Stabilität der induzierten Doppelbrechung und des Dichroismus wird durch diese Gruppen gesteigert. In Schichten flüssigkristalliner Polymeren wird die induzierte optische Anisotropie beim Tempern im Bereich der Mesophasen erheblich verstärkt. Dabei reicht ein geringes Maß an induzierter Anisotropie aus, um Doppelbrechungs- und Dichroismuswerte zu erzielen, wie sie für LC-Domänen typisch sind. In orientierten Schichten von Azobenzen-Polymeren wird das Resultat der linear polarisierten Bestrahlung durch die Stärke der anisotropen Wechselwirkungen in den flüssigkristallinen Domänen oder den LB-Multilayern bestimmt. Eine lichtinduzierte Reorientierung kann nur erreicht werden, wenn diese Wechselwirkungen überwunden werden können. Erfolgt eine Photoreorientierung in den orientierten Polymerschichten, werden in Copolymeren formanisotrope Seitengruppen ebenfalls kooperativ reorientiert. Eine vorgelagerte UV-Bestrahlung kann durch Erzeugung eines hohen Anteils an nicht-mesogenen Z-Isomeren die anisotropen Wechselwirkungen stark schwächen und so die Seitengruppen entkoppeln. Aus diesem Zustand erfolgt die Photoreorientierung mit einer der Photoorientierung in isotropen Schichten vergleichbaren Effizienz. Die erarbeiteten Struktur-Eigenschafts-Beziehungen liefern einen Beitrag zur Optimierung derartiger Materialien für Anwendungen in den Bereichen optischer Funktionsschichten, holographischer Datenspeicherung oder der Generierung von Oberflächenreliefgittern. N2 - The modification of optical characteristics by irradiation represents a basis for the creation of anisotropic optical components. In thin films of azobenzene polymers optical anisotropy can be induced or modified by linearly polarized irradiation. The goal of the work was it to compile substantial structure property relations of the photoorientation process in order to support an optimization of the materials for different applications. In isotropic films of liquid crystalline and amorphous azobenzene polymers the extent of the induced optical anisotropy is increased by a donor/acceptor substitution in 4,4'-position. The induction speed is clearly smaller in films of liquid crystalline polymers, however higher values of birefringence and dichroism can be reached. In copolymers the photoorientation of the azobenzene side groups causes a cooperative orientation of form-anisotropic side groups. The mesogenity of the non-photochromic side groups increases the extent of the induced optical anisotropy. The stability of the induced birefringence and dichroism is increased by these groups considerably. In films of liquid crystalline polymers the induced optical anisotropy is substantially amplified on annealing within the range of the mesophases. In this way, a small ratio of induced anisotropy is sufficient, in order to obtain birefringence and dichroism values as typical for LC domains. In oriented films of azobenzene polymers the result of the linear polarized irradiation is determined by the strength of the anisotropic interactions in the liquid crystalline domains or the LB multilayers. A light-induced reorientation can be only achieved, if these interactions can be overcome. If a photoreorientation takes place in the oriented layers of copolymers, form-anisotropic side groups are cooperatively reoriented. An initial UV irradiation can strongly weaken the anisotropic interactions by generating of a high fraction of non-mesogenic z-isomers and decouples in this way the side groups. From this state the photoreorientation proceeds with an efficiency one comparable to the photoorientation in isotropic films. The compiled structure property relations supplies a contribution for the optimization of such materials for applications in the fields of optical function films, holographic data storage or the generation of surface relief gratings. KW - Flüssigkristalline Polymere KW - Amorphe Polymere KW - Photochemie KW - Orientierungsbewegung KW - Lichtinduzierter Effekt KW - Azobenzen KW - Photoorientierung KW - Kooperativität KW - Linear polarisierte Bestrahlung KW - LB-Multilayer KW - azobenzene KW - photoorientation KW - cooperativity KW - linearly polarized irradiation KW - LB-multilayer Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus-7133 ER -