TY - THES A1 - Zeuschner, Steffen Peer T1 - Magnetoacoustics observed with ultrafast x-ray diffraction N2 - In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress. In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling. The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons. N2 - In der vorliegenden Arbeit untersuche ich die Gitterdynamik von magnetisch geordneten und dünnen Filmen, deren Spinsystem mit Femtosekunden-Laserpulsen angeregt und untersucht wird. Die Quantifizierung der laserinduzierten thermischen Dynamik, der erzeugten Pikosekunden-Schallpulse sowie deren jeweiliger Einfluss auf die Magnetisierungsdynamik ist ein schwieriges Unterfangen. Umso mehr ist die Entwicklung und Anwendung von effizienten experimentellen Konzepten und umfangreichen Modellen grundlegend für das Antreiben des zukünftigen wissenschaftlichen und technologischen Fortschritt. In jedem Experiment dieser kummulativen Dissertation untersuche ich das Kristallgitter von Nanometer dünnen Filmen nach der Anregung mit Femtosekunden-Laserpulsen. Die relative Änderung der Gitterkonstante, hervorgerufen durch thermische Ausdehnung oder Pikosekunden-Schallpulse, wird dabei direkt mittels ultraschneller Röntgenbeugung (UXRD) gemessen. Der Aufbau nutzt zur Bereitstellung von ultrakurzen Röntgenpulsen eine lasergetriebene Plasma-Röntgenquelle (PXS). Phononen und Spins üben gleichermaßen einen Druck auf das Gitter aus, welches entsprechend der elastsischen Eigenschaften des Materials reagiert, was das Gitter zu einem vielseitigen Sensor für ultraschenlle Wechselwirkungen macht. Zum einen untersuche ich Materialien mit starken magnetoelastischen Eigentschaften: die stark magnetostriktive Seltenen-Erden-Verbindung TbFe2, elementares Dysprosium oder das technologisch relavante Invar-Material FePt. Zum anderen habe ich eine umfangreiche Studie der Gitterdynamik von Bi1Y2Fe5O12 (Bi:YIG) angestellt, in dem der Literatur zufolge hochfrequente kohärente Spindynamiken durch Femtosekunden-Laseranregung zu beobachten sind. Diese stehenden Spinwellen (SSWs) höherer Ordnung entstehen durch die kohärente und inkohärente Bewegung von Atomen, in anderen Worten Phononen, welche ich durch UXRD vermessen habe. Somit sind wir in der Lage, die experimentellen Beobachtungen der Gitter- und Spindynamik qualitativ und quantitativ zu vereinigen. Dies geschieht durch eine Kombination von Viel-Temperatur- und Anisotropiemodellierung sowie elastische, magnetoelastische, und mikromagnetsiche Modelle. Die gemeinsamen Daten von UXRD und der zeitaufgelösten magnetooptischen Kerr-Effekt Messungen (tr-MOKE), um jeweils die Gitter- und Spindynamik zu messen, wurden in der Vergangenheit noch an unterschiedlichen experimentellen Aufbauten gemessen. Um die Quantifizierung präziser zu gestalten, haben wir in unserer Arbeitsgruppe UXRD und tr-MOKE in einem einzigen Aufbau kombiniert, welcher somit meines Wissens der erste seiner Art ist. Ich half bei dem Entwurf und der Inbetriebnahme des neuen Aufbaus, welcher die gleichzeitige Messung von Gitter- und Spindynamik auf einer ultraschnellen Zeitskala unter identischen Anregungsbedingungen ermöglicht. Außerdem entwickelte ich eine neue Messroutine für Röntgenbeugung, welche die Messzeit von UXRD-Experimenten um bis zu einer Größenordnungen reduziert. Es nennt sich das Schneiden des reziproken Raumes (reciprocal space slicing, RSS) und nutzt den Vorteil von Flächendetektoren die Bewegung von Beugungsreflexen zu detektieren, was von einer Änderung der Gitterkonstante einhergeht, ohne zeitintensive Scans der Beugungswinkel mit dem Goniometer durchzuführen. RSS ist besonders nützlich für ultraschnelle Beugungsexperimente, weil die Messzeit an Großgeräten wie Synchrotrons oder Freie Elektronen Laser eine seltene und teure Ressource ist. Darüber hinaus ist RSS nicht zwangsläufig auf die Anwendung in ultraschnellen Experimenten beschränkt und kann sogar auf andere Beugungsexperimente, wie die mit Neutronen und Elektronen, ausgeweitet werden. KW - ultrafast KW - X-ray diffraction KW - thin films KW - magnetoelasticity KW - ultraschnell KW - Röntgenbeugung KW - dünne Filme KW - Magnetoelastizität Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-561098 ER - TY - THES A1 - Cheng, Xiao T1 - Controlled solvent vapor annealing of block copolymer films T1 - Kontrolliertes Lösungsmitteldampfglühen von Blockcopolymerfilmen N2 - This project was focused on exploring the phase behavior of poly(styrene)187000-block-poly(2-vinylpyridine)203000 (SV390) with high molecular weight (390 kg/mol) in thin films, in which the self-assembly of block copolymers (BCPs) was realized via thermo-solvent annealing. The advanced processing technique of solvent vapor treatment provides controlled and stable conditions. In Chapter 3, the factors to influence the annealing process and the swelling behavior of homopolymers are presented and discussed. The swelling behavior of BCP in films is controlled by the temperature of the vapor and of the substrate, on one hand, and variation of the saturation of the solvent vapor atmosphere (different solvents), on the other hand. Additional factors like the geometry and material of the chamber, the type of flow inside the chamber etc. also influence the reproducibility and stability of the processing. The slightly selective solvent vapor of chloroform gives 10% more swelling of P2VP than PS in films with thickness of ~40 nm. The tunable morphology in ultrathin films of high molecular weight BCP (SV390) was investigated in Chapter 4. First, the swelling behavior can be precisely tuned by temperature and/or vapor flow separately, which provided information for exploring the multiple-parameter-influenced segmental chain mobility of polymer films. The equilibrium state of SV390 in thin films influenced by temperature was realized at various temperatures with the same degree of swelling. Various methods including characterization with SFM, metallization and RIE were used to identify the morphology of films as porous half-layer with PS dots and P2VP matrix. The kinetic investigations demonstrate that on substrates with either weak or strong interaction the original morphology of the BCP with high molecular weight is changed very fast within 5 min, and the further annealing serves for annihilation of defects. The morphological development of symmetric BCP in films with thickness increasing from half-layer to one-layer influenced by confinement factors of gradient film thicknesses and various surface properties of substrates was studied in Chapter 5. SV390 and SV99 films show bulk lamella-forming morphology after slightly selective solvent vapor (chloroform) treatment. SV99 films show cylinder-forming morphology under strongly selective solvent vapor (toluene) treatment since the asymmetric structure (caused by toluene uptake in PS blocks only) of SV99 block copolymer during annealing. Both kinds of morphology (lamella and cylinder) are influenced by the film thickness. The annealed morphology of SV390 and SV99 influenced by the combination of confined film and substrate property is similar to the morphology on flat silicon wafers. In this chapter the gradients in the film thickness and surface properties of the substrates with regard to their influence on the morphological development in thin BCP films are presented. Directed self-assembly (graphoepitaxy) of this SV390 was also investigated to compare with systematically reported SV99. In Chapter 6 an approach to induced oriented microphase separation in thick block copolymer films via treatment with the oriented vapor flow using mini-extruder is envisaged to be an alternative to existing methodologies, e.g. via non-solvent-induced phase separation. The preliminary tests performed in this study confirm potential perspective of this method, which alters the structure through the bulk of the film (as revealed by SAXS measurements), but more detailed studies have to be conducted in order to optimize the preparation. N2 - Im Rahmen dieser Arbeit wurde das Phasenverhalten von Poly(styrol)_187000 -block-poly(2-Vinylpyridin)_203000 (SV^390 ) hohen Molekulargewichts (390 kg/mol) in dünnen Filmen untersucht, in denen die Selbstassemblierung der Block-Copolymere durch Lösungsmitteltempern erreicht wurde. Das hochentwickelte Verfahren der Behandlung mit Lösungsmitteldampf bietet kontrollierte und stabile Bedingungen. In *Kapitel 3* werden die Faktoren diskutiert, die den Prozess des Temperns und das Schwellverhalten der dünnen Block-Copolymer Filme beeinflussen. Das Schwellverhalten von Block-Copolymeren in Filmen wird einerseits durch die Temperaturen des Lösungsmitteldampfes und des Substrates sowie andererseits dem Sättigungs-Dampfdruck kontrolliert. Zusätzlich beeinflussen auch Faktoren wie die Geometrie und das Material der Kammer sowie die Art der Strömung in der Kammer die Reproduzierbarkeit und Stabilität der Messungen. Der geringfügig selektive Lösungsmitteldampf von Chloroform führt zu 10% stärkerem Schwellen des P2VP-Blocks im Vergleich zu PS in Filmen mit einer Dicke von ca. 40 nm. Die variable Morphologie ultradünner Filme eines Block-Copolymers hohen Molekulargewichts (SV^390 ) wurde in *Kapitel 4* untersucht. Das Schwellverhalten kann durch die Temperatur und den Dampffluss unabhängig voneinander präzise beeinflusst werden. Die Umgebungstemperatur stellt einen limitierenden Faktor für den Bereich der Annealing-Temperatur aufgrund der möglichen Kondensation des Lösungsmitteldampfes dar. Mehrere Methoden, wie zum Beispiel die Charakterisierung mit Rasterkraftmikroskopie, Metallisierung und reaktives Ionenätzen, wurden verwendet, um die Morphologie der Filme als perforierte Lamellen mit PS-Kugeln und P2VP-Matrix zu bestimmen. Eine Analyse der Kinetik der Strukturbildung zeigt, dass sich die ursprüngliche Morphologie von Block-Copolymeren hohen Molekulargewichts sowohl auf Substraten mit schwacher als auch starker Wechselwirkung innerhalb von 5 min ändert und das weitere Tempern zum Ausheilen von Defekten führt. Die morphologische Veränderung von symmetrischen Block-Copolymeren bei Filmdicken zwischen einer halben Domänendicke und einer ganzen Domänendicke wurde in *Kapitel 5* in Abhängigkeit von Gradienten der Filmdicke und verschiedenen Oberflächeneigenschaften der Substrate untersucht. SV^390 und SV^99 Filme zeigen eine lamellare Bulk-Morphologie nach Behandlung mit geringfügig selektivem Lösungsmitteldampf (Chloroform). SV^99 Filme bilden eine zylindrische Morphologie unter Behandlung mit stark selektivem Lösungsmitteldampf (Toluol) aus, weil das SV^99 Block-Copolymer während des Temperns eine asymmetrische Struktur aufweist (Toluol-Aufnahme ausschließlich im Polystyrol-Block). Beide Morphologien (Lamellen und Zylinder) werden durch die Filmdicke beeinflusst. Die Morphologie von SV^390 und SV^99 nach Tempern ist abhängig von der Filmdicke und den Substrat-Eigenschaften und ähnlich der Morphologie auf flachen Silicium-Wafern. In *Kapitel 6* wird ein Ansatz zur induzierten orientierten Mikrophasenseparation in dicken Block-Copolymer Filmen durch Behandlung mit orientiertem Dampffluss unter Verwendung eines Miniextruders vorgestellt, der als Alternative zu existierenden Verfahren wie Nichtlösungsmittel-induzierter Phasenseparation dienen könnte. Die ersten im Rahmen dieser Arbeit durchgeführten Untersuchungen zeigen das Potential der Methode auf, welche die Struktur im gesamten Volumen des Films durchgehend beeinflusst (durch SAXS-Messungen gezeigt). Jedoch sind detailliertere Studien notwendig, um die Prozedur zu optimieren. KW - block copolymer KW - thin films KW - solvo-thermal annealing KW - Block-copolymer KW - dünne Filme KW - Lösungsmittel-thermisches Tempern Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-424179 ER - TY - THES A1 - Arvind, Malavika T1 - Regarding the role of aggregation and structural order on the mechanism of molecular doping of semiconducting polymers T1 - Die Rolle von Aggregation und struktureller Ordnung auf den Mechanismus der molekularen Dotierung von halbleitenden Polymeren BT - from solutions to films BT - von Lösungen zu Filmen N2 - Polymeric semiconductors are strong contenders for replacing traditional inorganic semiconductors in electronic applications requiring low power, low cost and flexibility, such as biosensors, flexible solar cells and electronic displays. Molecular doping has the potential to enable this revolution by improving the conductivity and charge transport properties of this class of materials. Despite decades of research in this field, gaps in our understanding of the nature of dopant–polymer interactions has resulted in limited commercialization of this technology. This work aims at providing a deeper insight into the underlying mechanisms of molecular p-doping of semiconducting polymers in the solution and solid-state, and thereby bring the scientific community closer to realizing the dream of making organic semiconductors commonplace in the electronics industry. The role of 1) dopant size/shape, 2) polymer chain aggregation and 3) charge delocalization on the doping mechanism and efficiency is addressed using optical (UV-Vis-NIR) and electron paramagnetic resonance (EPR) spectroscopies. By conducting a comprehensive study of the nature and concentration of the doping-induced species in solutions of the polymer poly(3-hexylthiophene) (P3HT) with 3 different dopants, we identify the unique optical signatures of the delocalized polaron, localized polaron and charge-transfer complex, and report their extinction coefficient values. Furthermore, with X-ray diffraction, atomic force microscopy and electrical conductivity measurements, we study the impact of processing technique and doping mechanism on the morphology and thereby, charge transport through the doped films. This work demonstrates that the doping mechanism and type of doping-induced species formed are strongly influenced by the polymer backbone arrangement rather than dopant shape/size. The ability of the polymer chain to aggregate is found to be crucial for efficient charge transfer (ionization) and polaron delocalization. At the same time, our results suggest that the high ionization efficiency of a dopant–polymer system in solution may subsequently hinder efficient charge transport in the solid-state due to the reduction in the fraction of tie chains, which enable charges to move efficiently between aggregated domains in the films. This study demonstrates the complex multifaceted nature of polymer doping while providing important hints for the future design of dopant-host systems and film fabrication techniques. N2 - Polymer-Halbleiter sind vielversprechende Kandidaten für den Ersatz traditioneller anorganischer Halbleiter in elektronischen Anwendungen, die einen geringen Stromverbrauch, niedrige Kosten und mechanische Flexibilität erfordern, wie z.B. Biosensoren, flexible Solarzellen und elektronische Bildschirme. Molekulare Dotierung hat das Potenzial, diese Revolution zu ermöglichen, indem sie die Leitfähigkeit und die Ladungstransporteigenschaften dieser Materialklasse verbessert. Trotz jahrzehntelanger Forschung auf diesem Gebiet hat das unvollständige Verständnis der Dotierstoff-Polymer-Wechselwirkungen nur zu einer begrenzten Kommerzialisierung dieser Technologie geführt.Ziel dieser Arbeit ist es, einen tieferen Einblick in die zugrunde liegenden Mechanismen der molekularen p-Dotierung von halbleitenden Polymeren in Lösung und im festen Zustand zu geben und dadurch die wissenschaftliche Gemeinschaft näher an die Verwirklichung des Traums heran zu bringen, organische Halbleiter in der Elektronikindustrie alltäglich zu machen. Diese Arbeit zeigt, dass der Dotierungsmechanismus und die Art der gebildeten, dotierungsinduzierten Spezies eher durch die Anordnung des Polymerrückgrats als durch die Form/Größe des Dotierstoffs beeinflusst werden. Die Fähigkeit der Polymerkette, zu aggregieren, stellt sich als entscheidend für einen effizienten Ladungstransfer (d.h. Ionisierung) und die Polaron-Delokalisierung heraus. Gleichzeitig deuten unsere Ergebnisse darauf hin, dass die hohe Ionisationseffizienz eines Dotierstoff-Polymersystems in der Lösung eine Beinträchtigung des effizienten Ladungstransport im festen Zustand nach sich ziehen kann, da der Anteil der Verbindungsketten, die eine effiziente Bewegung von Ladungen zwischen aggregierten Domänen in dünnen Filmen ermöglichen, reduziert wird. Diese Arbeit verdeutlicht die komplexe, vielschichtige Natur der Polymerdotierung und gibt dabei wichtige Hinweise für das zukünftige Design von Dotierstoff-Wirtssystemen und Filmherstellungstechniken. KW - molecular doping KW - organic semiconductors KW - Lewis acid doping KW - optical spectroscopy KW - thin films KW - semiconducting polymer KW - conductivity KW - dip doping KW - polymer aggregation KW - Dotierung KW - Polymer-Halbleiter KW - Leitfähigkeit KW - Lewis-Säure Dotierung KW - organische Halbleiter KW - Polymeraggregation KW - halbleitendes Polymer KW - Dünn film KW - optische Spektroskopie KW - molekulare Dotierung KW - Dip-Dotierung Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-500606 ER -