Dokument-ID Dokumenttyp Verfasser/Autoren Herausgeber Haupttitel Abstract Auflage Verlagsort Verlag Erscheinungsjahr Seitenzahl Schriftenreihe Titel Schriftenreihe Bandzahl ISBN Quelle der Hochschulschrift Konferenzname Quelle:Titel Quelle:Jahrgang Quelle:Heftnummer Quelle:Erste Seite Quelle:Letzte Seite URN DOI Abteilungen OPUS4-50427 Wissenschaftlicher Artikel Bai, Yongliang; Dong, Dongdong; Brune, Sascha; Wu, Shiguo; Wang, Zhenjie Crustal stretching style variations in the northern margin of the South China Sea Linking deep seismic profiles with regional-scale gravity inversion is a powerful tool to deduce the architecture of rifted margins and their structural evolution. Here we map upper and lower crustal thicknesses of the northern South China Sea (SCS) margin in order to investigate the occurrence of depth-dependent crustal extension from the proximal to the distal margin. By comparing upper and lower crustal stretching factors, we find that the northern margin of the SCS is segmented in three parts: (1) sedimentary basins where upper crust is stretched more than lower crust, (2) distal margin where lower crust is stretched more than upper crust, (3) mostly proximal margin regions where the two layers have similar stretching factors. Our results suggest that sedimentary basins and distal margin prominently feature depth-dependent extension, however accommodated by different processes. While differential thinning within sedimentary basins appears to be governed by lateral pressure variations inducing lower crustal flow, we suggest the distal margin to be affected by a combination of mantle flow-induced lower crustal shearing and sequential fault activity during crustal hyper-extension. Amsterdam Elsevier 2018 12 Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth 751 1 12 10.1016/j.tecto.2018.12.012 Institut für Geowissenschaften OPUS4-46370 Wissenschaftlicher Artikel Brune, Sascha; Corti, Giacomo; Ranalli, Giorgio Controls of inherited lithospheric heterogeneity on rift linkage: Numerical and analog models of interaction between the Kenyan and Ethiopian rifts across the Turkana depression Inherited rheological structures in the lithosphere are expected to have large impact on the architecture of continental rifts. The Turkana depression in the East African Rift connects the Main Ethiopian Rift to the north with the Kenya rift in the south. This region is characterized by a NW-SE trending band of thinned crust inherited from a Mesozoic rifting event, which is cutting the present-day N-S rift trend at high angle. In striking contrast to the narrow rifts in Ethiopia and Kenya, extension in the Turkana region is accommodated in subparallel deformation domains that are laterally distributed over several hundred kilometers. We present both analog experiments and numerical models that reproduce the along-axis transition from narrow rifting in Ethiopia and Kenya to a distributed deformation within the Turkana depression. Similarly to natural observations, our models show that the Ethiopian and Kenyan rifts bend away from each other within the Turkana region, thus forming a right-lateral step over and avoiding a direct link to form a continuous N-S depression. The models reveal five potential types of rift linkage across the preexisting basin: three types where rifts bend away from the inherited structure connecting via a (1) wide or (2) narrow rift or by (3) forming a rotating microplate, (4) a type where rifts bend towards it, and (5) straight rift linkage. The fact that linkage type 1 is realized in the Turkana region provides new insights on the rheological configuration of the Mesozoic rift system at the onset of the recent rift episode. Plain Language Summary The Turkana depression in the Kenya/Ethiopia borderland is most famous for its several million years old human fossils, but it also holds a rich geological history of continental separation. The Turkana region is a lowland located between the East African and Ethiopian domes because its crust and mantle have been stretched in a continent-wide rift event during Cretaceous times about 140-120 Ma ago. This thin lithosphere exerted paramount control on the dynamics of East African rifting in this area, which commenced around 15 Ma ago and persists until today. Combining analog "sandbox" experiments with numerical geodynamic modeling, we find that inherited rift structures explain the dramatic change in rift style from deep, narrow rift basins north and south of the Turkana area to wide, distributed deformation within the Turkana depression. The failed Cretaceous rift is also responsible for the eastward bend of the Ethiopian rift and the westward bend of the Kenyan rift when entering the Turkana depression, which generated the characteristic hook-shaped form of present-day Lake Turkana. Combing two independent modeling techniques-analog and numerical experiments-is a very promising approach allowing to draw robust conclusions about the processes that shape the surface of our planet. Washington American Geophysical Union 2017 20 Tectonics 36 1767 1786 10.1002/2017TC004739 Institut für Geowissenschaften OPUS4-46360 Wissenschaftlicher Artikel Rubey, Michael; Brune, Sascha; Heine, Christian; Davies, D. Rhodri; Williams, Simon E.; Müller, R. Dietmar role of subducted slabs Göttingen Copernicus 2017 21 Solid earth 8 899 919 10.5194/se-8-899-2017 Institut für Geowissenschaften OPUS4-48043 Review Wong, Kevin; Mason, Emily; Brune, Sascha; East, Madison; Edmonds, Marie; Zahirovic, Sabin Deep Carbon Cycling Over the Past 200 Million Years: A Review of Fluxes in Different Tectonic Settings Lausanne Frontiers Research Foundation 2019 22 Frontiers in Earth Science 7 10.3389/feart.2019.00263 Institut für Geowissenschaften OPUS4-48067 Wissenschaftlicher Artikel Lescoutre, Rodolphe; Tugend, Julie; Brune, Sascha; Masini, Emmanuel; Manatschal, Gianreto Thermal Evolution of Asymmetric Hyperextended Magma-Poor Rift Systems: Results From Numerical Modeling and Pyrenean Field Observations We investigate the thermal and structural evolution of asymmetric rifted margin using numerical modeling and geological observations derived from the Western Pyrenees. Our numerical model provides a self-consistent physical evolution of the top basement heat flow during asymmetric rifting. The model shows a pronounced thermal asymmetry that is caused by migration of the rift center toward the upper plate. The same process creates a diachronism for the record of maximum heat flow and maximum temperatures (T-max) in basal rift sequences. The Mauleon-Arzacq basin (W-Pyrenees) corresponds to a former mid-Cretaceous asymmetric hyperextended rift basin. New vitrinite reflectance data in addition to existing data sets from this basin reveal an asymmetry in the distribution of peak heat (T-max) with respect to the rift shoulders, where highest values are located at the former upper- to lower-plate transition. This data set from the Arzacq-Mauleon field study confirms for the first time the thermal asymmetry predicted by numerical models. Numerical modeling results also suggest that complexities in synrift thermal architecture could arise when hanging-wall-derived extensional allochthons and related T-max become part of the lower plate and are transported away from the upper- to lower-plate transition. This study emphasizes the limitations of the common approach to integrate punctual thermal data from pre-rift to synrift sedimentary sequences in order to describe the rift-related thermal evolution and paleothermal gradients at the scale of a rift basin or a rifted margin. Washington American Geophysical Union 2019 21 Geochemistry, geophysics, geosystems 20 10 4567 4587 10.1029/2019GC008600 Institut für Geowissenschaften OPUS4-52477 Wissenschaftlicher Artikel Naliboff, John B.; Glerum, Anne; Brune, Sascha; Péron-Pinvidic, G.; Wrona, Thilo Development of 3-D rift heterogeneity through fault network evolution Observations of rift and rifted margin architecture suggest that significant spatial and temporal structural heterogeneity develops during the multiphase evolution of continental rifting. Inheritance is often invoked to explain this heterogeneity, such as preexisting anisotropies in rock composition, rheology, and deformation. Here, we use high-resolution 3-D thermal-mechanical numerical models of continental extension to demonstrate that rift-parallel heterogeneity may develop solely through fault network evolution during the transition from distributed to localized deformation. In our models, the initial phase of distributed normal faulting is seeded through randomized initial strength perturbations in an otherwise laterally homogeneous lithosphere extending at a constant rate. Continued extension localizes deformation onto lithosphere-scale faults, which are laterally offset by tens of km and discontinuous along-strike. These results demonstrate that rift- and margin-parallel heterogeneity of large-scale fault patterns may in-part be a natural byproduct of fault network coalescence. New Jersey John Wiley & Sons, Inc. 2020 11 Geophysical Research Letters 47 13 Institut für Geowissenschaften OPUS4-53769 misc Brune, Sascha Forces within continental and oceanic rifts Boulder American Institute of Physics 2018 2 Geology 46 2 191 192 10.1130/focus022018.1 Institut für Geowissenschaften OPUS4-3130 Dissertation Brune, Sascha Landslide generated tsunamis : numerical modeling and real-time prediction Submarine landslides can generate local tsunamis posing a hazard to human lives and coastal facilities. Two major related problems are: (i) quantitative estimation of tsunami hazard and (ii) early detection of the most dangerous landslides. This thesis focuses on both those issues by providing numerical modeling of landslide-induced tsunamis and by suggesting and justifying a new method for fast detection of tsunamigenic landslides by means of tiltmeters. Due to the proximity to the Sunda subduction zone, Indonesian coasts are prone to earthquake, but also landslide tsunamis. The aim of the GITEWS-project (German-Indonesian Tsunami Early Warning System) is to provide fast and reliable tsunami warnings, but also to deepen the knowledge about tsunami hazards. New bathymetric data at the Sunda Arc provide the opportunity to evaluate the hazard potential of landslide tsunamis for the adjacent Indonesian islands. I present nine large mass movements in proximity to Sumatra, Java, Sumbawa and Sumba, whereof the largest event displaced 20 km³ of sediments. Using numerical modeling, I compute the generated tsunami of each event, its propagation and runup at the coast. Moreover, I investigate the age of the largest slope failures by relating them to the Great 1977 Sumba earthquake. Continental slopes off northwest Europe are well known for their history of huge underwater landslides. The current geological situation west of Spitsbergen is comparable to the continental margin off Norway after the last glaciation, when the large tsunamigenic Storegga slide took place. The influence of Arctic warming on the stability of the Svalbard glacial margin is discussed. Based on new geophysical data, I present four possible landslide scenarios and compute the generated tsunamis. Waves of 6 m height would be capable of reaching northwest Europe threatening coastal areas. I present a novel technique to detect large submarine landslides using an array of tiltmeters, as a possible tool in future tsunami early warning systems. The dislocation of a large amount of sediment during a landslide produces a permanent elastic response of the earth. I analyze this response with a mathematical model and calculate the theoretical tilt signal. Applications to the hypothetical Spitsbergen event and the historical Storegga slide show tilt signals exceeding 1000 nrad. The amplitude of landslide tsunamis is controlled by the product of slide volume and maximal velocity (slide tsunamigenic potential). I introduce an inversion routine that provides slide location and tsunamigenic potential, based on tiltmeter measurements. The accuracy of the inversion and of the estimated tsunami height near the coast depends on the noise level of tiltmeter measurements, the distance of tiltmeters from the slide, and the slide tsunamigenic potential. Finally, I estimate the applicability scope of this method by employing it to known landslide events worldwide. 2009 urn:nbn:de:kobv:517-opus-32986 Institut für Geowissenschaften OPUS4-51377 Wissenschaftlicher Artikel Brune, Sascha; Williams, Simon E.; Müller, R. Dietmar Oblique rifting: the rule, not the exception Movements of tectonic plates often induce oblique deformation at divergent plate boundaries. This is in striking contrast with traditional conceptual models of rifting and rifted margin formation, which often assume 2-D deformation where the rift velocity is oriented perpendicular to the plate boundary. Here we quantify the validity of this assumption by analysing the kinematics of major continent-scale rift systems in a global plate tectonic reconstruction from the onset of Pangea breakup until the present day. We evaluate rift obliquity by joint examination of relative extension velocity and local rift trend using the script-based plate reconstruction software pyGPlates. Our results show that the global mean rift obliquity since 230 Ma amounts to 34 degrees with a standard deviation of 24 degrees, using the convention that the angle of obliquity is spanned by extension direction and rift trend normal. We find that more than similar to 70 % of all rift segments exceeded an obliquity of 20 degrees demonstrating that oblique rifting should be considered the rule, not the exception. In many cases, rift obliquity and extension velocity increase during rift evolution (e.g. Australia-Antarctica, Gulf of California, South Atlantic, India-Antarctica), which suggests an underlying geodynamic correlation via obliquity-dependent rift strength. Oblique rifting produces 3-D stress and strain fields that cannot be accounted for in simplified 2-D plane strain analysis. We therefore highlight the importance of 3-D approaches in modelling, surveying, and interpretation of most rift segments on Earth where oblique rifting is the dominant mode of deformation. Göttingen Copernicus 2018 20 Solid earth 9 5 1187 1206 10.5194/se-9-1187-2018 Institut für Geowissenschaften OPUS4-50212 Wissenschaftlicher Artikel Ulvrova, Martina M.; Brune, Sascha; Williams, Simon E. Breakup Without Borders Relative plate motions during continental rifting result from the interplay of local with far-field forces. Here we study the dynamics of rifting and breakup using large-scale numerical simulations of mantle convection with self-consistent evolution of plate boundaries. We show that continental separation follows a characteristic evolution with four distinctive phases: (1) an initial slow rifting phase with low divergence velocities and maximum tensional stresses, (2) a synrift speed-up phase featuring an abrupt increase of extension rate with a simultaneous drop of tensional stress, (3) the breakup phase with inception of fast sea-floor spreading, and (4) a deceleration phase occurring in most but not all models where extensional velocities decrease. We find that the speed-up during rifting is compensated by subduction acceleration or subduction initiation even in distant localities. Our study illustrates new links between local rift dynamics, plate motions, and subduction kinematics during times of continental separation. Washington American Geophysical Union 2019 10 Geophysical research letters 46 3 1338 1347 10.1029/2018GL080387 Institut für Geowissenschaften OPUS4-50379 Wissenschaftlicher Artikel Merdith, Andrew S.; Williams, Simon E.; Brune, Sascha; Collins, Alan S.; Müller, R. Dietmar Rift and plate boundary evolution across two supercontinent cycles The extent of continental rifts and subduction zones through deep geological time provides insights into the mechanisms behind supercontinent cycles and the long term evolution of the mantle. However, previous compilations have stopped short of mapping the locations of rifts and subduction zones continuously since the Neoproterozoic and within a self-consistent plate kinematic framework. Using recently published plate models with continuously closing boundaries for the Neoproterozoic and Phanerozoic, we estimate how rift and peri-continental subduction length vary from 1 Ga to present and test hypotheses pertaining to the supercontinent cycle and supercontinent breakup. We extract measures of continental perimeter-to-area ratio as a proxy for the existence of a supercontinent, where during times of supercontinent existence the perimeter-to-area ratio should be low, and during assembly and dispersal it should be high. The amalgamation of Gondwana is clearly represented by changes in the length of peri-continental subduction and the breakup of Rodinia and Pangea by changes in rift lengths. The assembly of Pangea is not clearly defined using plate boundary lengths, likely because its formation resulted from the collision of only two large continents. Instead the assembly of Gondwana (ca. 520 Ma) marks the most prominent change in arc length and perimeter-to-area ratio during the last billion years suggesting that Gondwana during the Early Palaeozoic could explicitly be considered part of a Phanerozoic supercontinent. Consequently, the traditional understanding of the supercontinent cycle, in terms of supercontinent existence for short periods of time before dispersal and re-accretion, may be inadequate to fully describe the cycle. Instead, either a two-stage supercontinent cycle could be a more appropriate concept, or alternatively the time period of 1 to 0 Ga has to be considered as being dominated by supercontinent existence, with brief periods of dispersal and amalgamation. Amsterdam Elsevier 2018 14 Global and planetary change 173 1 14 10.1016/j.gloplacha.2018.11.006 Institut für Geowissenschaften OPUS4-49525 Wissenschaftlicher Artikel Dielforder, Armin; Frasca, Gianluca; Brune, Sascha; Ford, Mary Formation of the Iberian-European convergent plate boundary fault and its effect on intraplate deformation in Central Europe With the Late Cretaceous onset of Africa-Iberia-Europe convergence Central Europe experienced a pulse of intraplate shortening lasting some 15-20 Myr. This deformation event documents area-wide deviatoric compression of Europe and has been interpreted as a far-field response to Africa-Iberia-Europe convergence. However, the factors that governed the compression of Europe and conditioned the transient character of the deformation event have remained unclear. Based on mechanical considerations, numerical simulations, and geological reconstructions, we examine how the dynamics of intraplate deformation were governed by the formation of a convergent plate boundary fault between Iberia and Europe. During the Late Cretaceous, plate convergence was accommodated by the inversion of a young hyperextended rift system separating Iberia from Europe. Our analysis shows that the strength of the lithosphere beneath this rift was initially sufficient to transmit large compressive stresses far into Europe, though the lithosphere beneath the rift was thinned and thermally weakened. Continued convergence forced the formation of the plate boundary fault between Iberia and Europe. The fault evolved progressively and constituted a lithospheric-scale structure at the southern margin of Europe that weakened rheologically. This development caused a decrease in mechanical coupling between Iberia and Europe and a reduction of compressional far field stresses, which eventually terminated intraplate deformation in Central Europe. Taken together, our findings suggest that the Late Cretaceous intraplate deformation event records a high force transient that relates to the earliest strength evolution of a lithospheric-scale plate boundary fault. Washington American Geophysical Union 2019 23 Geochemistry, geophysics, geosystems 20 5 2395 2417 10.1029/2018GC007840 Institut für Geowissenschaften OPUS4-56013 Wissenschaftlicher Artikel Rajaonarison, Tahiry A.; Stamps, D. Sarah; Fishwick, Stewart; Brune, Sascha; Glerum, Anne; Hu, Jiashun Numerical modeling of mantle flow beneath Madagascar to constrain upper mantle rheology beneath continental regions Over the past few decades, azimuthal seismic anisotropy measurements have been widely used proxy to study past and present-day deformation of the lithosphere and to characterize convection in the mantle. Beneath continental regions, distinguishing between shallow and deep sources of anisotropy remains difficult due to poor depth constraints of measurements and a lack of regional-scale geodynamic modeling. Here, we constrain the sources of seismic anisotropy beneath Madagascar where a complex pattern cannot be explained by a single process such as absolute plate motion, global mantle flow, or geology. We test the hypotheses that either Edge-Driven Convection (EDC) or mantle flow derived from mantle wind interactions with lithospheric topography is the dominant source of anisotropy beneath Madagascar. We, therefore, simulate two sets of mantle convection models using regional-scale 3-D computational modeling. We then calculate Lattice Preferred Orientation that develops along pathlines of the mantle flow models and use them to calculate synthetic splitting parameters. Comparison of predicted with observed seismic anisotropy shows a good fit in northern and southern Madagascar for the EDC model, but the mantle wind case only fits well in northern Madagascar. This result suggests the dominant control of the measured anisotropy may be from EDC, but the role of localized fossil anisotropy in narrow shear zones cannot be ruled out in southern Madagascar. Our results suggest that the asthenosphere beneath northern and southern Madagascar is dominated by dislocation creep. Dislocation creep rheology may be dominant in the upper asthenosphere beneath other regions of continental lithosphere. Washington American Geophysical Union 2020 23 Journal of geophysical research : Solid earth 125 2 10.1029/2019JB018560 Institut für Geowissenschaften OPUS4-41824 misc Rubey, Michael; Brune, Sascha; Heine, Christian; Davies, D. Rhodri; Williams, Simon E.; Müller, R. Dietmar Global patterns in Earth's dynamic topography since the Jurassic We evaluate the spatial and temporal evolution of Earth's long-wavelength surface dynamic topography since the Jurassic using a series of high-resolution global mantle convection models. These models are Earth-like in terms of convective vigour, thermal structure, surface heat-flux and the geographic distribution of heterogeneity. The models generate a degree-2-dominated spectrum of dynamic topography with negative amplitudes above subducted slabs (i.e. circum-Pacific regions and southern Eurasia) and positive amplitudes elsewhere (i.e. Africa, north-western Eurasia and the central Pacific). Model predictions are compared with published observations and subsidence patterns from well data, both globally and for the Australian and southern African regions. We find that our models reproduce the long-wavelength component of these observations, although observed smaller-scale variations are not reproduced. We subsequently define "geodynamic rules" for how different surface tectonic settings are affected by mantle processes: (i) locations in the vicinity of a subduction zone show large negative dynamic topography amplitudes; (ii) regions far away from convergent margins feature long-term positive dynamic topography; and (iii) rapid variations in dynamic support occur along the margins of overriding plates (e.g. the western US) and at points located on a plate that rapidly approaches a subduction zone (e.g. India and the Arabia Peninsula). Our models provide a predictive quantitative framework linking mantle convection with plate tectonics and sedimentary basin evolution, thus improving our understanding of how subduction and mantle convection affect the spatio-temporal evolution of basin architecture. 2017 21 Postprints der Universität Potsdam : Mathematisch Naturwissenschaftliche Reihe 623 899 919 urn:nbn:de:kobv:517-opus4-418241 10.25932/publishup-41824 Mathematisch-Naturwissenschaftliche Fakultät OPUS4-46146 Wissenschaftlicher Artikel Brune, Sascha; Williams, Simon E.; Mueller, R. Dietmar Potential links between continental rifting, CO2 degassing and climate change through time New York Nature Publ. Group 2017 8 Nature geoscience 10 941 + 10.1038/s41561-017-0003-6 Institut für Geowissenschaften OPUS4-52466 misc Naliboff, John B.; Glerum, Anne; Brune, Sascha; Péron-Pinvidic, G.; Wrona, Thilo Development of 3-D rift heterogeneity through fault network evolution Observations of rift and rifted margin architecture suggest that significant spatial and temporal structural heterogeneity develops during the multiphase evolution of continental rifting. Inheritance is often invoked to explain this heterogeneity, such as preexisting anisotropies in rock composition, rheology, and deformation. Here, we use high-resolution 3-D thermal-mechanical numerical models of continental extension to demonstrate that rift-parallel heterogeneity may develop solely through fault network evolution during the transition from distributed to localized deformation. In our models, the initial phase of distributed normal faulting is seeded through randomized initial strength perturbations in an otherwise laterally homogeneous lithosphere extending at a constant rate. Continued extension localizes deformation onto lithosphere-scale faults, which are laterally offset by tens of km and discontinuous along-strike. These results demonstrate that rift- and margin-parallel heterogeneity of large-scale fault patterns may in-part be a natural byproduct of fault network coalescence. 2020 13 Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe 13 urn:nbn:de:kobv:517-opus4-524661 10.25932/publishup-52466 Institut für Geowissenschaften OPUS4-60611 Wissenschaftlicher Artikel Baes, Marzieh; Sobolev, Stephan; Gerya, Taras V.; Brune, Sascha Plume-induced subduction initiation Initiation of subduction following the impingement of a hot buoyant mantle plume is one of the few scenarios that allow breaking the lithosphere and recycling a stagnant lid without requiring any preexisting weak zones. Here, we investigate factors controlling the number and shape of retreating subducting slabs formed by plume-lithosphere interaction. Using 3-D thermomechanical models we show that the deformation regime, which defines formation of single-slab or multi-slab subduction, depends on several parameters such as age of oceanic lithosphere, thickness of the crust and large-scale lithospheric extension rate. Our model results indicate that on present-day Earth multi-slab plume-induced subduction is initiated only if the oceanic lithosphere is relatively young (<30-40 Myr, but >10 Myr), and the crust has a typical thickness of 8 km. In turn, development of single-slab subduction is facilitated by older lithosphere and pre-imposed extensional stresses. In early Earth, plume-lithosphere interaction could have led to formation of either episodic short-lived circular subduction when the oceanic lithosphere was young or to multi-slab subduction when the lithosphere was old. Washington American Geophysical Union 2020 19 Geochemistry, geophysics, geosystems 21 2 10.1029/2019GC008663 Institut für Geowissenschaften OPUS4-43236 Habilitation Brune, Sascha Modelling continental rift dynamics Continental rift systems open up unique possibilities to study the geodynamic system of our planet: geodynamic localization processes are imprinted in the morphology of the rift by governing the time-dependent activity of faults, the topographic evolution of the rift or by controlling whether a rift is symmetric or asymmetric. Since lithospheric necking localizes strain towards the rift centre, deformation structures of previous rift phases are often well preserved and passive margins, the end product of continental rifting, retain key information about the tectonic history from rift inception to continental rupture. Current understanding of continental rift evolution is based on combining observations from active rifts with data collected at rifted margins. Connecting these isolated data sets is often accomplished in a conceptual way and leaves room for subjective interpretation. Geodynamic forward models, however, have the potential to link individual data sets in a quantitative manner, using additional constraints from rock mechanics and rheology, which allows to transcend previous conceptual models of rift evolution. By quantifying geodynamic processes within continental rifts, numerical modelling allows key insight to tectonic processes that operate also in other plate boundary settings, such as mid ocean ridges, collisional mountain chains or subduction zones. In this thesis, I combine numerical, plate-tectonic, analytical, and analogue modelling approaches, whereas numerical thermomechanical modelling constitutes the primary tool. This method advanced rapidly during the last two decades owing to dedicated software development and the availability of massively parallel computer facilities. Nevertheless, only recently the geodynamical modelling community was able to capture 3D lithospheric-scale rift dynamics from onset of extension to final continental rupture. The first chapter of this thesis provides a broad introduction to continental rifting, a summary of the applied rift modelling methods and a short overview of previews studies. The following chapters, which constitute the main part of this thesis feature studies on plate boundary dynamics in two and three dimension followed by global scale analyses (Fig. 1). Chapter II focuses on 2D geodynamic modelling of rifted margin formation. It highlights the formation of wide areas of hyperextended crustal slivers via rift migration as a key process that affected many rifted margins worldwide. This chapter also contains a study of rift velocity evolution, showing that rift strength loss and extension velocity are linked through a dynamic feed-back. This process results in abrupt accelerations of the involved plates during rifting illustrating for the first time that rift dynamics plays a role in changing global-scale plate motions. Since rift velocity affects key processes like faulting, melting and lower crustal flow, this study also implies that the slow-fast velocity evolution should be imprinted in rifted margin structures. Chapter III relies on 3D Cartesian rift models in order to investigate various aspects of rift obliquity. Oblique rifting occurs if the extension direction is not orthogonal to the rift trend. Using 3D lithospheric-scale models from rift initialisation to breakup I could isolate a characteristic evolution of dominant fault orientations. Further work in Chapter III addresses the impact of rift obliquity on the strength of the rift system. We illustrate that oblique rifting is mechanically preferred over orthogonal rifting, because the brittle yielding requires a lower tectonic force. This mechanism elucidates rift competition during South Atlantic rifting, where the more oblique Equatorial Atlantic Rift proceeded to breakup while the simultaneously active but less oblique West African rift system became a failed rift. Finally this Chapter also investigates the impact of a previous rift phase on current tectonic activity in the linkage area of the Kenyan with Ethiopian rift. We show that the along strike changes in rift style are not caused by changes in crustal rheology. Instead the rift linkage pattern in this area can be explained when accounting for the thinned crust and lithosphere of a Mesozoic rift event. Chapter IV investigates rifting from the global perspective. A first study extends the oblique rift topic of the previous chapter to global scale by investigating the frequency of oblique rifting during the last 230 million years. We find that approximately 70% of all ocean-forming rift segments involved an oblique component of extension where obliquities exceed 20°. This highlights the relevance of 3D approaches in modelling, surveying, and interpretation of many rifted margins. In a final study, we propose a link between continental rift activity, diffuse CO2 degassing and Mesozoic/Cenozoic climate changes. We used recent CO2 flux measurements in continental rifts to estimate worldwide rift-related CO2 release, which we based on the global extent of rifts through time. The first-order correlation to paleo-atmospheric CO2 proxy data suggests that rifts constitute a major element of the global carbon cycle. 2018 192 urn:nbn:de:kobv:517-opus4-432364 10.25932/publishup-43236 Institut für Geowissenschaften OPUS4-52274 misc Baes, Marzieh; Sobolev, Stephan Vladimir; Gerya, Taras V.; Brune, Sascha Plume-induced subduction initiation Initiation of subduction following the impingement of a hot buoyant mantle plume is one of the few scenarios that allow breaking the lithosphere and recycling a stagnant lid without requiring any preexisting weak zones. Here, we investigate factors controlling the number and shape of retreating subducting slabs formed by plume-lithosphere interaction. Using 3-D thermomechanical models we show that the deformation regime, which defines formation of single-slab or multi-slab subduction, depends on several parameters such as age of oceanic lithosphere, thickness of the crust and large-scale lithospheric extension rate. Our model results indicate that on present-day Earth multi-slab plume-induced subduction is initiated only if the oceanic lithosphere is relatively young (<30-40 Myr, but >10 Myr), and the crust has a typical thickness of 8 km. In turn, development of single-slab subduction is facilitated by older lithosphere and pre-imposed extensional stresses. In early Earth, plume-lithosphere interaction could have led to formation of either episodic short-lived circular subduction when the oceanic lithosphere was young or to multi-slab subduction when the lithosphere was old. 2020 21 Postprints der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe 2 urn:nbn:de:kobv:517-opus4-522742 10.25932/publishup-52274 Institut für Geowissenschaften OPUS4-56608 Wissenschaftlicher Artikel Baes, Marzieh; Sobolev, Stephan V.; Gerya, Taras V.; Brune, Sascha Subduction initiation by Plume-Plateau interaction It has recently been demonstrated that the interaction of a mantle plume with sufficiently old oceanic lithosphere can initiate subduction. However, the existence of large lithospheric heterogeneities, such as a buoyant plateau, in proximity to a rising plume head may potentially hinder the formation of a new subduction zone. Here, we investigate this scenario by means of 3-D numerical thermomechanical modeling. We explore how plume-lithosphere interaction is affected by lithospheric age, relative location of plume head and plateau border, and the strength of the oceanic crust. Our numerical experiments suggest four different geodynamic regimes: (a) oceanic trench formation, (b) circular oceanic-plateau trench formation, (c) plateau trench formation, and (d) no trench formation. We show that regardless of the age and crustal strength of the oceanic lithosphere, subduction can initiate when the plume head is either below the plateau border or at a distance less than the plume radius from the plateau edge. Crustal heterogeneity facilitates subduction initiation of old oceanic lithosphere. High crustal strength hampers the formation of a new subduction zone when the plume head is located below a young lithosphere containing a thick and strong plateau. We suggest that plume-plateau interaction in the western margin of the Caribbean could have resulted in subduction initiation when the plume head impinged onto the oceanic lithosphere close to the border between plateau and oceanic crust. Washington American Geophysical Union 2020 17 Geochemistry, geophysics, geosystems 21 8 10.1029/2020GC009119 Institut für Geowissenschaften OPUS4-61172 Wissenschaftlicher Artikel Heckenbach, Esther Lina; Brune, Sascha; Glerum, Anne C.; Bott, Judith Is there a speed limit for the thermal steady-state assumption in continental rifts? The lithosphere is often assumed to reside in a thermal steady-state when quantitatively describing the temperature distribution in continental interiors and sedimentary basins, but also at active plate boundaries. Here, we investigate the applicability limit of this assumption at slowly deforming continental rifts. To this aim, we assess the tectonic thermal imprint in numerical experiments that cover a range of realistic rift configurations. For each model scenario, the deviation from thermal equilibrium is evaluated. This is done by comparing the transient temperature field of every model to a corresponding steady-state model with an identical structural configuration. We find that the validity of the thermal steady-state assumption strongly depends on rift type, divergence velocity, sampling location, and depth within the rift. Maximum differences between transient and steady-state models occur in narrow rifts, at the rift sides, and if the extension rate exceeds 0.5-2 mm/a. Wide rifts, however, reside close to thermal steady-state even for high extension velocities. The transient imprint of rifting appears to be overall negligible for shallow isotherms with a temperature less than 100 degrees C. Contrarily, a steady-state treatment of deep crustal isotherms leads to an underestimation of crustal temperatures, especially for narrow rift settings. Thus, not only relatively fast rifts like the Gulf of Corinth, Red Sea, and Main Ethiopian Rift, but even slow rifts like the Kenya Rift, Rhine Graben, and Rio Grande Rift must be expected to feature a pronounced transient component in the temperature field and to therefore violate the thermal steady-state assumption for deeper crustal isotherms. Hoboken, NJ Wiley 2021 18 Geochemistry, geophysics, geosystems : G 3 ; an electronic journal of the earth sciences 22 3 10.1029/2020GC009577 Institut für Geowissenschaften OPUS4-47545 Wissenschaftlicher Artikel Nardini, Livia; Rybacki, Erik; Döhmann, Maximilian J.E.A.; Morales, Luiz F.G.; Brune, Sascha; Dresen, Georg High-temperature shear zone formation in Carrara marble Rock deformation at depths in the Earth's crust is often localized in high temperature shear zones occurring at different scales in a variety of lithologies. The presence of material heterogeneities is known to trigger shear zone development, but the mechanisms controlling initiation and evolution of localization are not fully understood. To investigate the effect of loading conditions on shear zone nucleation along heterogeneities, we performed torsion experiments under constant twist rate (CTR) and constant torque (CT) conditions in a Paterson-type deformation apparatus. The sample assemblage consisted of cylindrical Carrara marble specimens containing a thin plate of Solnhofen limestone perpendicular to the cylinder's longitudinal axis. Under experimental conditions (900 °C, 400 MPa confining pressure), samples were plastically deformed and limestone is about 9 times weaker than marble, acting as a weak inclusion in a strong matrix. CTR experiments were performed at maximum bulk shear strain rates of ~ 2*10-4s-1, yielding peak shear stresses of ~ 20 MPa. CT tests were conducted at shear stresses of ~ 20 MPa resulting in bulk shear strain rates of 1-4*10-4s-1. Experiments were terminated at maximum bulk shear strains of ~ 0.3 and 1.0.Strain was localized within the Carrara marble in front of the inclusion in an area of strongly deformed grains and intense grain size reduction. Locally, evidences for coexisting brittle deformation are also observed regardless of the imposed loading conditions. The local shear strain at the inclusion tipis up to 30 times higher than the strain in the adjacent host rock, rapidly dropping to 5times higher at larger distance from the inclusion. At both investigated bulk strains, the evolution of microstructural and textural parameters is independent of loading conditions. Ourresults suggest that loading conditions do not significantly affect material heterogeneity-induced strain localization during its nucleation and transient stages. Amsterdam [u.a.] Elsevier 2018 19 Tectonophysics 749 120 139 10.1016/j.tecto.2018.10.022 Institut für Geowissenschaften OPUS4-47547 Wissenschaftlicher Artikel Döhmann, Maximilian J.E.A.; Brune, Sascha; Nardini, Livia; Rybacki, Erik; Dresen, Georg Strain Localization and Weakening Processes in Viscously Deforming Rocks Localization processes in the viscous lower crust generate ductile shear zones over a broad range of scales affecting long-term lithosphere deformation and the mechanical response of faults during the seismic cycle. Here we use centimeter-scale numerical models in order to gain detailed insight into the processes involved in strain localization and rheological weakening in viscously deforming rocks. Our 2-D Cartesian models are benchmarked to high-temperature and high-pressure torsion experiments on Carrara marble samples containing a single weak Solnhofen limestone inclusion. The models successfully reproduce bulk stress-strain transients and final strain distributions observed in the experiments by applying a simple, first-order softening law that mimics rheological weakening. We find that local stress concentrations forming at the inclusion tips initiate strain localization inside the host matrix. At the tip of the propagating shear zone, weakening occurs within a process zone, which expands with time from the inclusion tips toward the matrix. Rheological weakening is a precondition for shear zone localization, and the width of this shear zone is found to be controlled by the degree of softening. Introducing a second softening step at elevated strain, a high strain layer develops inside the localized shear zone, analogous to the formation of ultramylonite bands in mylonites. These results elucidate the transient evolution of stress and strain rate during inception and maturation of ductile shear zones. Washington, DC Union 2019 17 Journal of geophysical research : JGR 124 1 1120 1137 10.1029/2018JB016917 Institut für Geowissenschaften OPUS4-49928 Wissenschaftlicher Artikel Corti, Giacomo; Cioni, Raffaello; Franceschini, Zara; Sani, Federico; Scaillet, Stephane; Molin, Paola; Isola, Ilaria; Mazzarini, Francesco; Brune, Sascha; Keir, Derek; Erbello Doelesso, Asfaw; Muluneh, Ameha; Illsley-Kemp, Finnigan; Glerum, Anne Aborted propagation of the Ethiopian rift caused by linkage with the Kenyan rift Continental rift systems form by propagation of isolated rift segments that interact, and eventually evolve into continuous zones of deformation. This process impacts many aspects of rifting including rift morphology at breakup, and eventual ocean-ridge segmentation. Yet, rift segment growth and interaction remain enigmatic. Here we present geological data from the poorly documented Ririba rift (South Ethiopia) that reveals how two major sectors of the East African rift, the Kenyan and Ethiopian rifts, interact. We show that the Ririba rift formed from the southward propagation of the Ethiopian rift during the Pliocene but this propagation was short-lived and aborted close to the Pliocene-Pleistocene boundary. Seismicity data support the abandonment of laterally offset, overlapping tips of the Ethiopian and Kenyan rifts. Integration with new numerical models indicates that rift abandonment resulted from progressive focusing of the tectonic and magmatic activity into an oblique, throughgoing rift zone of near pure extension directly connecting the rift sectors. London Nature Publ. Group 2019 11 Nature Communications 10 10.1038/s41467-019-09335-2 Institut für Umweltwissenschaften und Geographie OPUS4-50447 Wissenschaftlicher Artikel Ballato, Paolo; Brune, Sascha; Strecker, Manfred Sedimentary loading-unloading cycles and faulting in intermontane basins The removal, redistribution, and transient storage of sediments in tectonically active mountain belts is thought to exert a first-order control on shallow crustal stresses, fault activity, and hence on the spatiotemporal pattern of regional deformation processes. Accordingly, sediment loading and unloading cycles in intermontane sedimentary basins may inhibit or promote intrabasinal faulting, respectively, but unambiguous evidence for this potential link has been elusive so far. Here we combine 2D numerical experiments that simulate contractional deformation in a broken-foreland setting (i.e., a foreland where shortening is diachronously absorbed by spatially disparate, reverse faults uplifting basement blocks) with field data from intermontane basins in the NW Argentine Andes. Our modeling results suggest that thicker sedimentary fills (>0.7-1.0 km) may suppress basinal faulting processes, while thinner fills (<0.7 km) tend to delay faulting. Conversely, the removal of sedimentary loads via fluvial incision and basin excavation promotes renewed intrabasinal faulting. These results help to better understand the tectono-sedimentary history of intermontane basins that straddle the eastern border of the Andean Plateau in northwestern Argentina. For example, the Santa Maria and the Humahuaca basins record intrabasinal deformation during or after sediment unloading, while the Quebrada del Toro Basin reflects the suppression of intrabasinal faulting due to loading by coarse conglomerates. We conclude that sedimentary loading and unloading cycles may exert a fundamental control on spatiotemporal deformation patterns in intermontane basins of tectonically active broken forelands. (C) 2018 Elsevier B.V. All rights reserved. Amsterdam Elsevier 2019 9 Earth & planetary science letters 506 388 396 10.1016/j.epsl.2018.10.043 Institut für Geowissenschaften OPUS4-61442 Wissenschaftlicher Artikel Richter, Maximilian; Brune, Sascha; Riedl, Simon; Glerum, Anne; Neuharth, Derek; Strecker, Manfred Controls on asymmetric rift dynamics Complex, time-dependent, and asymmetric rift geometries are observed throughout the East African Rift System (EARS) and are well documented, for instance, in the Kenya Rift. To unravel asymmetric rifting processes in this region, we conduct 2D geodynamic models. We use the finite element software ASPECT employing visco-plastic rheologies, mesh-refinement, distributed random noise seeding, and a free surface. In contrast to many previous numerical modeling studies that aimed at understanding final rifted margin symmetry, we explicitly focus on initial rifting stages to assess geodynamic controls on strain localization and fault evolution. We thereby link to geological and geophysical observations from the Southern and Central Kenya Rift. Our models suggest a three-stage early rift evolution that dynamically bridges previously inferred fault-configuration phases of the eastern EARS branch: (1) accommodation of initial strain localization by a single border fault and flexure of the hanging-wall crust, (2) faulting in the hanging-wall and increasing upper-crustal faulting in the rift-basin center, and (3) loss of pronounced early stage asymmetry prior to basinward localization of deformation. This evolution may provide a template for understanding early extensional faulting in other branches of the East African Rift and in asymmetric rifts worldwide. By modifying the initial random noise distribution that approximates small-scale tectonic inheritance, we show that a spectrum of first-order fault configurations with variable symmetry can be produced in models with an otherwise identical setup. This approach sheds new light on along-strike rift variability controls in active asymmetric rifts and proximal rifted margins. Washington American Geophysical Union 2021 21 Tectonics / American Geophysical Union, AGU ; European Geophysical Society, EGS 40 5 10.1029/2020TC006553 Institut für Geowissenschaften OPUS4-61028 Wissenschaftlicher Artikel Glerum, Anne; Brune, Sascha; Stamps, D. Sarah; Strecker, Manfred Victoria continental microplate dynamics controlled by the lithospheric strength distribution of the East African Rift The Victoria microplate between the Eastern and Western Branches of the East African Rift System is one of the largest continental microplates on Earth. In striking contrast to its neighboring plates, Victoria rotates counterclockwise with respect to Nubia. The underlying cause of this distinctive rotation has remained elusive so far. Using 3D numerical models, we investigate the role of pre-existing lithospheric heterogeneities in continental microplate rotation. We find that Victoria's rotation is primarily controlled by the distribution of rheologically stronger zones that transmit the drag of the major plates to the microplate and of the mechanically weaker mobile belts surrounding Victoria that facilitate rotation. Our models reproduce Victoria's GPS-derived counterclockwise rotation as well as key complexities of the regional tectonic stress field. These results reconcile competing ideas on the opening of the rift system by highlighting differences in orientation of the far-field divergence, local extension, and the minimum horizontal stress. One of the largest continental microplates on Earth is situated in the center of the East African Rift System, and oddly, the Victoria microplate rotates counterclockwise with respect to the neighboring African tectonic plate. Here, the authors' modelling results suggest that Victoria microplate rotation is caused by edge-driven lithospheric processes related to the specific geometry of rheologically weak and strong regions. London Nature Publishing Group 2020 15 Nature Communications 11 1 10.1038/s41467-020-16176-x Institut für Geowissenschaften OPUS4-62971 Wissenschaftlicher Artikel Neuharth, Derek; Brune, Sascha; Glerum, Anne; Morley, Chris K.; Yuan, Xiaoping; Braun, Jean Flexural strike-slip basins Strike-slip faults are classically associated with pull-apart basins where continental crust is thinned between two laterally offset fault segments. We propose a subsidence mechanism to explain the formation of a new type of basin where no substantial segment offset or synstrike-slip thinning is observed. Such "flexural strike-slip basins" form due to a sediment load creating accommodation space by bending the lithosphere. We use a two-way coupling between the geodynamic code ASPECT and surface-processes code FastScape to show that flexural strike-slip basins emerge if sediment is deposited on thin lithosphere close to a strike slip fault. These conditions were met at the Andaman Basin Central fault (Andaman Sea, Indian Ocean), where seismic reflection data provide evidence of a laterally extensive flexural basin with a depocenter located parallel to the strike-slip fault trace. Boulder American Institute of Physics 2021 5 Geology : a venture in earth science reporting / the Geological Society of America 50 3 361 365 10.1130/G49351.1 Institut für Geowissenschaften OPUS4-63000 Wissenschaftlicher Artikel Neuharth, Derek; Brune, Sascha; Wrona, Thilo; Glerum, Anne; Braun, Jean; Yuan, Xiaoping Evolution of rift systems and their fault networks in response to surface processes Continental rifting is responsible for the generation of major sedimentary basins, both during rift inception and during the formation of rifted continental margins. Geophysical and field studies revealed that rifts feature complex networks of normal faults but the factors controlling fault network properties and their evolution are still matter of debate. Here, we employ high-resolution 2D geodynamic models (ASPECT) including two-way coupling to a surface processes (SP) code (FastScape) to conduct 12 models of major rift types that are exposed to various degrees of erosion and sedimentation. We further present a novel quantitative fault analysis toolbox (Fatbox), which allows us to isolate fault growth patterns, the number of faults, and their length and displacement throughout rift history. Our analysis reveals that rift fault networks may evolve through five major phases: (a) distributed deformation and coalescence, (b) fault system growth, (c) fault system decline and basinward localization, (d) rift migration, and (e) breakup. These phases can be correlated to distinct rifted margin domains. Models of asymmetric rifting suggest rift migration is facilitated through both ductile and brittle deformation within a weak exhumation channel that rotates subhorizontally and remains active at low angles. In sedimentation-starved settings, this channel satisfies the conditions for serpentinization. We find that SP are not only able to enhance strain localization and to increase fault longevity but that they also reduce the total length of the fault system, prolong rift phases and delay continental breakup. Washington American Geophysical Union 2022 22 Tectonics 41 3 10.1029/2021TC007166 Institut für Geowissenschaften