@phdthesis{Siegmund2022, author = {Siegmund, Nicole}, title = {Wind driven soil particle uptake Quantifying drivers of wind erosion across the particle size spectrum}, doi = {10.25932/publishup-57489}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-574897}, school = {Universit{\"a}t Potsdam}, pages = {ix, 56}, year = {2022}, abstract = {Among the multitude of geomorphological processes, aeolian shaping processes are of special character, Pedogenic dust is one of the most important sources of atmospheric aerosols and therefore regarded as a key player for atmospheric processes. Soil dust emissions, being complex in composition and properties, influence atmospheric processes and air quality and has impacts on other ecosystems. In this because even though their immediate impact can be considered low (exceptions exist), their constant and large-scale force makes them a powerful player in the earth system. dissertation, we unravel a novel scientific understanding of this complex system based on a holistic dataset acquired during a series of field experiments on arable land in La Pampa, Argentina. The field experiments as well as the generated data provide information about topography, various soil parameters, the atmospheric dynamics in the very lower atmosphere (4m height) as well as measurements regarding aeolian particle movement across a wide range of particle size classes between 0.2μm up to the coarse sand. The investigations focus on three topics: (a) the effects of low-scale landscape structures on aeolian transport processes of the coarse particle fraction, (b) the horizontal and vertical fluxes of the very fine particles and (c) the impact of wind gusts on particle emissions. Among other considerations presented in this thesis, it could in particular be shown, that even though the small-scale topology does have a clear impact on erosion and deposition patterns, also physical soil parameters need to be taken into account for a robust statistical modelling of the latter. Furthermore, specifically the vertical fluxes of particulate matter have different characteristics for the particle size classes. Finally, a novel statistical measure was introduced to quantify the impact of wind gusts on the particle uptake and its application on the provided data set. The aforementioned measure shows significantly increased particle concentrations during points in time defined as gust event. With its holistic approach, this thesis further contributes to the fundamental understanding of how atmosphere and pedosphere are intertwined and affect each other.}, language = {en} } @phdthesis{SchulteOsseili2019, author = {Schulte-Osseili, Christine}, title = {Vom Monomer zum Glykopolymer}, doi = {10.25932/publishup-43216}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432169}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 149}, year = {2019}, abstract = {Glykopolymere sind synthetische und nat{\"u}rlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich f{\"u}r viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen erm{\"o}glicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt. In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kosteng{\"u}nstigen Syntheseweg geachtet werden. Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden {\"u}ber ATRP und RAFT-Polymerisation Glykopolymere synthetisiert. Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in w{\"a}ssriger L{\"o}sung untersucht. Die Polymere formten in w{\"a}ssriger L{\"o}sung Mizellen, bei denen der Zuckerblock an der Oberfl{\"a}che der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte. Außerdem wurden die Glykopolymere als Oberfl{\"a}chenbeschichtung {\"u}ber „Grafting from" mit SI-ATRP oder {\"u}ber „Grafting to" auf verschiedene Oberfl{\"a}chen gebunden. Durch die glykopolymerbschichteten Oberfl{\"a}chen konnte die Glykan Protein Wechselwirkung {\"u}ber spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsst{\"a}rke untersucht. Die synthetisierten Glykopolymere k{\"o}nnten durch Austausch der Glykaneinheit f{\"u}r andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die biovertr{\"a}glichen Glykopolymere w{\"a}ren alternativen f{\"u}r den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den K{\"o}rper. Außerdem k{\"o}nnten die funktionalisierten Oberfl{\"a}chen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, k{\"o}nnten als antiadsorptive Oberfl{\"a}chenbeschichtung z.B. in der Zellbiologie eingesetzt werden.}, language = {de} } @phdthesis{Zeppenfeld2021, author = {Zeppenfeld, Stefan}, title = {Vom Gast zum Gastwirt?}, series = {Geschichte der Gegenwart}, journal = {Geschichte der Gegenwart}, number = {26}, publisher = {Wallstein-Verlag}, address = {G{\"o}ttingen}, isbn = {978-3-8353-5022-9}, pages = {429}, year = {2021}, abstract = {Die Arbeitsmigration z{\"a}hlt zu den pr{\"a}genden gesellschaftlichen Wandlungsprozessen der deutschen Nachkriegsgeschichte. 14 Millionen »Gastarbeiter« kamen zwischen 1955 und 1973 in die Bundesrepublik, etwa 3 Millionen von ihnen kehrten nicht in ihre Heimatl{\"a}nder zur{\"u}ck. Vor allem T{\"u}rkeist{\"a}mmige blieben nach dem Anwerbestopp h{\"a}ufiger in Deutschland als die Arbeitskr{\"a}fte aus anderen L{\"a}ndern. Wie keine andere Stadt steht Berlin bis heute f{\"u}r die Einwanderung aus der T{\"u}rkei. Stefan Zeppenfeld untersucht den Wandel der t{\"u}rkischen Arbeitswelten von ihren Anf{\"a}ngen in den 1960er Jahren bis zur Wiedervereinigung. Ausgehend von der »Gastarbeit« im industriellen Großbetrieb sp{\"u}rt er in seiner Studie am Beispiel West-Berlins dem {\"U}bergang in andere Branchen nach. Er zeigt, wie der {\"o}ffentliche Dienst auch f{\"u}r Migrantinnen und Migranten attraktive Aufstiegsm{\"o}glichkeiten er{\"o}ffnete, zeichnet den schwierigen Weg in die gewerbliche Selbstst{\"a}ndigkeit nach und legt illegale Besch{\"a}ftigungsformen als alternative Verdienstm{\"o}glichkeit offen. Damit bettet der Autor die Geschichte der t{\"u}rkischen Arbeitsmigration in die deutsche Zeitgeschichte ein.}, language = {de} } @phdthesis{Ruch2010, author = {Ruch, Jo{\"e}l}, title = {Volcano deformation analysis in the Lazufre area (central Andes) using geodetic and geological observations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-47361}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {Large-scale volcanic deformation recently detected by radar interferometry (InSAR) provides new information and thus new scientific challenges for understanding volcano-tectonic activity and magmatic systems. The destabilization of such a system at depth noticeably affects the surrounding environment through magma injection, ground displacement and volcanic eruptions. To determine the spatiotemporal evolution of the Lazufre volcanic area located in the central Andes, we combined short-term ground displacement acquired by InSAR with long-term geological observations. Ground displacement was first detected using InSAR in 1997. By 2008, this displacement affected 1800 km2 of the surface, an area comparable in size to the deformation observed at caldera systems. The original displacement was followed in 2000 by a second, small-scale, neighbouring deformation located on the Lastarria volcano. We performed a detailed analysis of the volcanic structures at Lazufre and found relationships with the volcano deformations observed with InSAR. We infer that these observations are both likely to be the surface expression of a long-lived magmatic system evolving at depth. It is not yet clear whether Lazufre may trigger larger unrest or volcanic eruptions; however, the second deformation detected at Lastarria and the clear increase of the large-scale deformation rate make this an area of particular interest for closer continuous monitoring.}, language = {en} } @phdthesis{Senger2007, author = {Senger, Toralf}, title = {Untersuchungen zur Metallhom{\"o}ostase in Arabidopsis thaliana}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13234}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {Alle Organismen sind f{\"u}r ihr {\"U}berleben auf Metalle angewiesen. Hierbei gibt es f{\"u}r jedes Metall einen Konzentrationsbereich, der das Optimum zwischen Metallmangel, -bedarf und -toxizit{\"a}t darstellt. Es gilt mittlerweile als erwiesen, dass alle Organismen zur Aufrechterhaltung des Metallgleichgewichts ein komplexes Netzwerk von Proteinen und niedermolekularen Verbindungen entwickelt haben. Die molekularen Komponenten dieses Netzwerks sind nur zu einem Teil bekannt und charakterisiert: In den letzten Jahren wurden einige Proteinfamilien identifiziert, deren Mitglieder Metalle durch Lipidmembranen transportieren. Eine dieser Metalltransporterfamilien ist die Cation Diffusion Facilitator (CDF)-Familie: Alle charakterisierten Mitglieder exportieren Metalle aus dem Zytoplasma - entweder in zellul{\"a}re Kompartimente oder aus der Zelle heraus. Von den zw{\"o}lf Mitgliedern dieser Familie in Arabidopsis thaliana (A. thaliana) - Metall Toleranz Protein (MTP)-1 bis -12 - wurden bisher AtMTP1 und AtMTP3 charakterisiert. In dieser Arbeit wird die Charakterisierung von AtMTP2 beschrieben. Wie die homologen Proteine AtMTP1 und AtMTP3 f{\"u}hrt AtMTP2 zu Zn-Toleranz, wenn es heterolog in Zn-sensitiven Hefemutanten exprimiert wird. Mit AtMTP2 transformierte Hefemutanten zeigten dar{\"u}ber hinaus erh{\"o}hte Co-Toleranz. Expression von chim{\"a}ren AtMTP2/GFP Fusionsproteinen in Hefe, A.thaliana protoplasten und in stabil transformierten A.thalinana Planzenlinien deutet auf Lokalisation of AtMTP2 in Membranen des Endoplasmatischen Retikulums (ER) hin, wenn GFP an den C-Terminus von MTP2 fusioniert wird. Fusion of GFP an den N-Terminus von AtMTP2 f{\"u}hrte zu Lokalisation in der vakuol{\"a}ren Membran, was wahrscheinlichsten auf Fehllokalisierung durch Maskierung eines ER-Retentionsmotivs (XXRR) am N-Terminus von AtMTP2 zur{\"u}ckgeht. Dies legt nahe, dass AtMTP2 die erw{\"a}hnten Metalle in das Endomembransystem der Zelle transportieren kann. Eine gewebespezifische Lokalisierung wurde mit Pflanzen durchgef{\"u}hrt, die das β-Glucuronidase (GUS)-Reporterprotein bzw. chim{\"a}re Fusionsproteine aus EGFP und AtMTP2 unter Kontrolle des nativen pMTP2-Promotors exprimierten. Diese Experimente best{\"a}tigten zum einen, dass der pMTP2-Promotor nur unter Zn-Defizienz aktiv ist. GUS-Aktivit{\"a}t wurde unter diesen Bedingungen in zwei Zonen der Wurzelspitze beobachtet: in den isodiametrischen Zellen der meristematischen Zone und in der beginnenden Wurzelhaarzone. Dar{\"u}ber hinaus konnte gezeigt werden, dass die EGFP-Fusionsproteine unter Kontrolle des nativen pMTP2-Promotors nur in epidermalen Zellen exprimiert werden. F{\"u}r eine homozygote Knockout- Linie, mtp2-S3, konnte bisher kein eindeutiger Ph{\"a}notyp identifiziert werden. Auf Grundlage der bisher durchgef{\"u}hrten Charakterisierung von AtMTP2 erscheinen zwei Modelle der Funktion von AtMTP2 in der Pflanze m{\"o}glich: AtMTP2 k{\"o}nnte essentiell f{\"u}r die Versorgung des ER mit Zn unter Zn-Mangelbedingungen sein. Hierf{\"u}r spricht, dass AtMTP2 in jungen, teilungsaktiven und damit Zn-ben{\"o}tigenden Wurzelzonen exprimiert wird. Die auf die Epidermis beschr{\"a}nkte Lokalisation k{\"o}nnte bei diesem Modell auf die M{\"o}glichkeit der zwischenzellul{\"a}ren Zn-Verteilung innerhalb des ER {\"u}ber Desmotubules hindeuten. Alternativ k{\"o}nnte AtMTP2 eine Funktion bei der Detoxifizierung von Zn unter Zn-Schock Bedingungen haben: Es ist bekannt, dass unter Zn- Mangelbedingungen die Expression der zellul{\"a}ren Zn-Aufnahmesysteme hochreguliert wird. Wenn nun die Zn-Verf{\"u}gbarkeit im Boden z. B durch eine pH-{\"A}nderung innerhalb kurzer Zeit stark ansteigt, besteht die Notwendigkeit der Entgiftung von Zn innerhalb der Zelle, bis der starke Einstrom von Zn ins Zytoplasma durch die Deaktivierung der Zn-Aufnahmesysteme und einer geringeren Expression in der Pflanze gedrosselt ist. Ein {\"a}hnlicher Mechanismus wurde in der B{\"a}ckerhefe S. cerevisae beschrieben, in der dar{\"u}ber hinaus ein Zn-Transporter verst{\"a}rkt exprimiert wird, der Zn durch Transport in die Vakuole entgiften kann. Es ist durchaus m{\"o}glich, dass in Arabidopsis AtMTP2 die Zn-Detoxifizierung unter diesen speziellen Bedingungen durch Zn-Transport in das ER oder die Vakuole vermittelt. Zur Identifikation weiterer Komponenten des Metallhom{\"o}ostasenetzwerks sind verschiedene Ans{\"a}tze denkbar. In dieser Arbeit wurde in Hefe ein heterologer Screen durchgef{\"u}hrt, um Interaktoren f{\"u}r vier Mitglieder der Arabidopsis-CDF-Familie zu identifizieren. Unter den 11 im Hefesystem best{\"a}tigten Kandidaten befindet sich mit AtSPL1 ein AtMTP1-Interaktionskandidat, der m{\"o}glicherweise eine Rolle bei der Cu-,Zn-Hom{\"o}ostase spielt. Als wahrscheinliche AtMTP3-Interaktionskandidaten wurde die c"-Untereinheit der vakuol{\"a}ren H+-ATPase AtVHA identifiziert sowie mit AtNPSN13 ein Protein, das vermutlich eine Rolle bei Fusionen von Vesikeln mit Zielmembranen spielt. Ein anderer Ansatz zur Identifikation neuer Metallhom{\"o}ostasegene ist die vergleichende Elementanalyse von nat{\"u}rlichen oder mutagenisierten Pflanzenpopulationen. Voraussetzung f{\"u}r diesen Ansatz ist die schnelle und genaue Analyse des Elementgehalts von Pflanzen. Eine etablierte Methode zur simultanen Bestimmung von bis zu 65 Elementen in einer Probe ist die Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES). Der limitierende Faktor f{\"u}r einen hohen Probendurchsatz ist die Notwendigkeit, Proben f{\"u}r die Analyse zu verfl{\"u}ssigen. Eine alternative Methode der Probenzuf{\"u}hrung zum Analyseger{\"a}t ist die elektrothermale Verdampfung (ETV) der Probe. Zur weitgehend automatisierten Analyse von Pflanzenmaterial mit minimiertem Arbeitsaufwand wurde eine Methode entwickelt, die auf der Kopplung der ETV mit der ICP OES basiert.}, language = {de} } @phdthesis{Drobyshev2023, author = {Drobyshev, Evgenii}, title = {Toxic or beneficial? What is the role of food-relevant selenium species selenoneine?}, doi = {10.25932/publishup-57379}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-573794}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 100}, year = {2023}, abstract = {Selenium (Se) is an essential trace element that is ubiquitously present in the environment in small concentrations. Essential functions of Se in the human body are manifested through the wide range of proteins, containing selenocysteine as their active center. Such proteins are called selenoproteins which are found in multiple physiological processes like antioxidative defense and the regulation of thyroid hormone functions. Therefore, Se deficiency is known to cause a broad spectrum of physiological impairments, especially in endemic regions with low Se content. Nevertheless, being an essential trace element, Se could exhibit toxic effects, if its intake exceeds tolerable levels. Accordingly, this range between deficiency and overexposure represents optimal Se supply. However, this range was found to be narrower than for any other essential trace element. Together with significantly varying Se concentrations in soil and the presence of specific bioaccumulation factors, this represents a noticeable difficulty in the assessment of Se epidemiological status. While Se is acting in the body through multiple selenoproteins, its intake occurs mainly in form of small organic or inorganic molecular mass species. Thus, Se exposure not only depends on daily intake but also on the respective chemical form, in which it is present. The essential functions of selenium have been known for a long time and its primary forms in different food sources have been described. Nevertheless, analytical capabilities for a comprehensive investigation of Se species and their derivatives have been introduced only in the last decades. A new Se compound was identified in 2010 in the blood and tissues of bluefin tuna. It was called selenoneine (SeN) since it is an isologue of naturally occurring antioxidant ergothioneine (ET), where Se replaces sulfur. In the following years, SeN was identified in a number of edible fish species and attracted attention as a new dietary Se source and potentially strong antioxidant. Studies in populations whose diet largely relies on fish revealed that SeN represents the main non-protein bound Se pool in their blood. First studies, conducted with enriched fish extracts, already demonstrated the high antioxidative potential of SeN and its possible function in the detoxification of methylmercury in fish. Cell culture studies demonstrated, that SeN can utilize the same transporter as ergothioneine, and SeN metabolite was found in human urine. Until recently, studies on SeN properties were severely limited due to the lack of ways to obtain the pure compound. As a predisposition to this work was firstly a successful approach to SeN synthesis in the University of Graz, utilizing genetically modified yeasts. In the current study, by use of HepG2 liver carcinoma cells, it was demonstrated, that SeN does not cause toxic effectsup to 100 μM concentration in hepatocytes. Uptake experiments showed that SeN is not bioavailable to the used liver cells. In the next part a blood-brain barrier (BBB) model, based on capillary endothelial cells from the porcine brain, was used to describe the possible transfer of SeN into the central nervous system (CNS). The assessment of toxicity markers in these endothelial cells and monitoring of barrier conditions during transfer experiments demonstrated the absence of toxic effects from SeN on the BBB endothelium up to 100 μM concentration. Transfer data for SeN showed slow but substantial transfer. A statistically significant increase was observed after 48 hours following SeN incubation from the blood-facing side of the barrier. However, an increase in Se content was clearly visible already after 6 hours of incubation with 1 μM of SeN. While the transfer rate of SeN after application of 0.1 μM dose was very close to that for 1 μM, incubation with 10 μM of SeN resulted in a significantly decreased transfer rate. Double-sided application of SeN caused no side-specific transfer of SeN, thus suggesting a passive diffusion mechanism of SeN across the BBB. This data is in accordance with animal studies, where ET accumulation was observed in the rat brain, even though rat BBB does not have the primary ET transporter - OCTN1. Investigation of capillary endothelial cell monolayers after incubation with SeN and reference selenium compounds showed no significant increase of intracellular selenium concentration. Speciesspecific Se measurements in medium samples from apical and basolateral compartments, as good as in cell lysates, showed no SeN metabolization. Therefore, it can be concluded that SeN may reach the brain without significant transformation. As the third part of this work, the assessment of SeN antioxidant properties was performed in Caco-2 human colorectal adenocarcinoma cells. Previous studies demonstrated that the intestinal epithelium is able to actively transport SeN from the intestinal lumen to the blood side and accumulate SeN. Further investigation within current work showed a much higher antioxidant potential of SeN compared to ET. The radical scavenging activity after incubation with SeN was close to the one observed for selenite and selenomethionine. However, the SeN effect on the viability of intestinal cells under oxidative conditions was close to the one caused by ET. To answer the question if SeN is able to be used as a dietary Se source and induce the activity of selenoproteins, the activity of glutathione peroxidase (GPx) and the secretion of selenoprotein P (SelenoP) were measured in Caco-2 cells, additionally. As expected, reference selenium compounds selenite and selenomethionine caused efficient induction of GPx activity. In contrast to those SeN had no effect on GPx activity. To examine the possibility of SeN being embedded into the selenoproteome, SelenoP was measured in a culture medium. Even though Caco-2 cells effectively take up SeN in quantities much higher than selenite or selenomethionine, no secretion of SelenoP was observed after SeN incubation. Summarizing, we can conclude that SeN can hardly serve as a Se source for selenoprotein synthesis. However, SeN exhibit strong antioxidative properties, which appear when sulfur in ET is exchanged by Se. Therefore, SeN is of particular interest for research not as part of Se metabolism, but important endemic dietary antioxidant.}, language = {en} } @phdthesis{Lenz2016, author = {Lenz, Josefine}, title = {Thermokarst dynamics in central-eastern Beringia}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-101364}, school = {Universit{\"a}t Potsdam}, pages = {XII, 128, A-47}, year = {2016}, abstract = {Widespread landscape changes are presently observed in the Arctic and are most likely to accelerate in the future, in particular in permafrost regions which are sensitive to climate warming. To assess current and future developments, it is crucial to understand past environmental dynamics in these landscapes. Causes and interactions of environmental variability can hardly be resolved by instrumental records covering modern time scales. However, long-term environmental variability is recorded in paleoenvironmental archives. Lake sediments are important archives that allow reconstruction of local limnogeological processes as well as past environmental changes driven directly or indirectly by climate dynamics. This study aims at reconstructing Late Quaternary permafrost and thermokarst dynamics in central-eastern Beringia, the terrestrial land mass connecting Eurasia and North America during glacial sea-level low stands. In order to investigate development, processes and influence of thermokarst dynamics, several sediment cores from extant lakes and drained lake basins were analyzed to answer the following research questions: 1. When did permafrost degradation and thermokarst lake development take place and what were enhancing and inhibiting environmental factors? 2. What are the dominant processes during thermokarst lake development and how are they reflected in proxy records? 3. How did, and still do, thermokarst dynamics contribute to the inventory and properties of organic matter in sediments and the carbon cycle? Methods applied in this study are based upon a multi-proxy approach combining sedimentological, geochemical, geochronological, and micropaleontological analyses, as well as analyses of stable isotopes and hydrochemistry of pore-water and ice. Modern field observations of water quality and basin morphometrics complete the environmental investigations. The investigated sediment cores reveal permafrost degradation and thermokarst dynamics on different time scales. The analysis of a sediment core from GG basin on the northern Seward Peninsula (Alaska) shows prevalent terrestrial accumulation of yedoma throughout the Early to Mid Wisconsin with intermediate wet conditions at around 44.5 to 41.5 ka BP. This first wetland development was terminated by the accumulation of a 1-meter-thick airfall tephra most likely originating from the South Killeak Maar eruption at 42 ka BP. A depositional hiatus between 22.5 and 0.23 ka BP may indicate thermokarst lake formation in the surrounding of the site which forms a yedoma upland till today. The thermokarst lake forming GG basin initiated 230 ± 30 cal a BP and drained in Spring 2005 AD. Four years after drainage the lake talik was still unfrozen below 268 cm depth. A permafrost core from Mama Rhonda basin on the northern Seward Peninsula preserved a full lacustrine record including several lake phases. The first lake generation developed at 11.8 cal ka BP during the Lateglacial-Early Holocene transition; its old basin (Grandma Rhonda) is still partially preserved at the southern margin of the study basin. Around 9.0 cal ka BP a shallow and more dynamic thermokarst lake developed with actively eroding shorelines and potentially intermediate shallow water or wetland phases (Mama Rhonda). Mama Rhonda lake drainage at 1.1 cal ka BP was followed by gradual accumulation of terrestrial peat and top-down refreezing of the lake talik. A significant lower organic carbon content was measured in Grandma Rhonda deposits (mean TOC of 2.5 wt\%) than in Mama Rhonda deposits (mean TOC of 7.9 wt\%) highlighting the impact of thermokarst dynamics on biogeochemical cycling in different lake generations by thawing and mobilization of organic carbon into the lake system. Proximal and distal sediment cores from Peatball Lake on the Arctic Coastal Plain of Alaska revealed young thermokarst dynamics since about 1,400 years along a depositional gradient based on reconstructions from shoreline expansion rates and absolute dating results. After its initiation as a remnant pond of a previous drained lake basin, a rapidly deepening lake with increasing oxygenation of the water column is evident from laminated sediments, and higher Fe/Ti and Fe/S ratios in the sediment. The sediment record archived characterizing shifts in depositional regimes and sediment sources from upland deposits and re-deposited sediments from drained thaw lake basins depending on the gradually changing shoreline configuration. These changes are evident from alternating organic inputs into the lake system which highlights the potential for thermokarst lakes to recycle old carbon from degrading permafrost deposits of its catchment. The lake sediment record from Herschel Island in the Yukon (Canada) covers the full Holocene period. After its initiation as a thermokarst lake at 11.7 cal ka BP and intense thermokarst activity until 10.0 cal ka BP, the steady sedimentation was interrupted by a depositional hiatus at 1.6 cal ka BP which likely resulted from lake drainage or allochthonous slumping due to collapsing shore lines. The specific setting of the lake on a push moraine composed of marine deposits is reflected in the sedimentary record. Freshening of the maturing lake is indicated by decreasing electrical conductivity in pore-water. Alternation of marine to freshwater ostracods and foraminifera confirms decreasing salinity as well but also reflects episodical re-deposition of allochthonous marine sediments. Based on permafrost and lacustrine sediment records, this thesis shows examples of the Late Quaternary evolution of typical Arctic permafrost landscapes in central-eastern Beringia and the complex interaction of local disturbance processes, regional environmental dynamics and global climate patterns. This study confirms that thermokarst lakes are important agents of organic matter recycling in complex and continuously changing landscapes.}, language = {en} } @phdthesis{Morgenstern2012, author = {Morgenstern, Anne}, title = {Thermokarst and thermal erosion : degradation of Siberian ice-rich permafrost}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-62079}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {Current climate warming is affecting arctic regions at a faster rate than the rest of the world. This has profound effects on permafrost that underlies most of the arctic land area. Permafrost thawing can lead to the liberation of considerable amounts of greenhouse gases as well as to significant changes in the geomorphology, hydrology, and ecology of the corresponding landscapes, which may in turn act as a positive feedback to the climate system. Vast areas of the east Siberian lowlands, which are underlain by permafrost of the Yedoma-type Ice Complex, are particularly sensitive to climate warming because of the high ice content of these permafrost deposits. Thermokarst and thermal erosion are two major types of permafrost degradation in periglacial landscapes. The associated landforms are prominent indicators of climate-induced environmental variations on the regional scale. Thermokarst lakes and basins (alasses) as well as thermo-erosional valleys are widely distributed in the coastal lowlands adjacent to the Laptev Sea. This thesis investigates the spatial distribution and morphometric properties of these degradational features to reconstruct their evolutionary conditions during the Holocene and to deduce information on the potential impact of future permafrost degradation under the projected climate warming. The methodological approach is a combination of remote sensing, geoinformation, and field investigations, which integrates analyses on local to regional spatial scales. Thermokarst and thermal erosion have affected the study region to a great extent. In the Ice Complex area of the Lena River Delta, thermokarst basins cover a much larger area than do present thermokarst lakes on Yedoma uplands (20.0 and 2.2 \%, respectively), which indicates that the conditions for large-area thermokarst development were more suitable in the past. This is supported by the reconstruction of the development of an individual alas in the Lena River Delta, which reveals a prolonged phase of high thermokarst activity since the Pleistocene/Holocene transition that created a large and deep basin. After the drainage of the primary thermokarst lake during the mid-Holocene, permafrost aggradation and degradation have occurred in parallel and in shorter alternating stages within the alas, resulting in a complex thermokarst landscape. Though more dynamic than during the first phase, late Holocene thermokarst activity in the alas was not capable of degrading large portions of Pleistocene Ice Complex deposits and substantially altering the Yedoma relief. Further thermokarst development in existing alasses is restricted to thin layers of Holocene ice-rich alas sediments, because the Ice Complex deposits underneath the large primary thermokarst lakes have thawed completely and the underlying deposits are ice-poor fluvial sands. Thermokarst processes on undisturbed Yedoma uplands have the highest impact on the alteration of Ice Complex deposits, but will be limited to smaller areal extents in the future because of the reduced availability of large undisturbed upland surfaces with poor drainage. On Kurungnakh Island in the central Lena River Delta, the area of Yedoma uplands available for future thermokarst development amounts to only 33.7 \%. The increasing proximity of newly developing thermokarst lakes on Yedoma uplands to existing degradational features and other topographic lows decreases the possibility for thermokarst lakes to reach large sizes before drainage occurs. Drainage of thermokarst lakes due to thermal erosion is common in the study region, but thermo-erosional valleys also provide water to thermokarst lakes and alasses. Besides these direct hydrological interactions between thermokarst and thermal erosion on the local scale, an interdependence between both processes exists on the regional scale. A regional analysis of extensive networks of thermo-erosional valleys in three lowland regions of the Laptev Sea with a total study area of 5,800 km² found that these features are more common in areas with higher slopes and relief gradients, whereas thermokarst development is more pronounced in flat lowlands with lower relief gradients. The combined results of this thesis highlight the need for comprehensive analyses of both, thermokarst and thermal erosion, in order to assess past and future impacts and feedbacks of the degradation of ice-rich permafrost on hydrology and climate of a certain region.}, language = {en} } @phdthesis{Meessen2019, author = {Meeßen, Christian}, title = {The thermal and rheological state of the Northern Argentinian foreland basins}, doi = {10.25932/publishup-43994}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439945}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 151}, year = {2019}, abstract = {The foreland of the Andes in South America is characterised by distinct along strike changes in surface deformational styles. These styles are classified into two end-members, the thin-skinned and the thick-skinned style. The superficial expression of thin-skinned deformation is a succession of narrowly spaced hills and valleys, that form laterally continuous ranges on the foreland facing side of the orogen. Each of the hills is defined by a reverse fault that roots in a basal d{\´e}collement surface within the sedimentary cover, and acted as thrusting ramp to stack the sedimentary pile. Thick-skinned deformation is morphologically characterised by spatially disparate, basement-cored mountain ranges. These mountain ranges are uplifted along reactivated high-angle crustal-scale discontinuities, such as suture zones between different tectonic terranes. Amongst proposed causes for the observed variation are variations in the dip angle of the Nazca plate, variation in sediment thickness, lithospheric thickening, volcanism or compositional differences. The proposed mechanisms are predominantly based on geological observations or numerical thermomechanical modelling, but there has been no attempt to understand the mechanisms from a point of data-integrative 3D modelling. The aim of this dissertation is therefore to understand how lithospheric structure controls the deformational behaviour. The integration of independent data into a consistent model of the lithosphere allows to obtain additional evidence that helps to understand the causes for the different deformational styles. Northern Argentina encompasses the transition from the thin-skinned fold-and-thrust belt in Bolivia, to the thick-skinned Sierras Pampeanas province, which makes this area a well suited location for such a study. The general workflow followed in this study first involves data-constrained structural- and density-modelling in order to obtain a model of the study area. This model was then used to predict the steady-state thermal field, which was then used to assess the present-day rheological state in northern Argentina. The structural configuration of the lithosphere in northern Argentina was determined by means of data-integrative, 3D density modelling verified by Bouguer gravity. The model delineates the first-order density contrasts in the lithosphere in the uppermost 200 km, and discriminates bodies for the sediments, the crystalline crust, the lithospheric mantle and the subducting Nazca plate. To obtain the intra-crustal density structure, an automated inversion approach was developed and applied to a starting structural model that assumed a homogeneously dense crust. The resulting final structural model indicates that the crustal structure can be represented by an upper crust with a density of 2800 kg/m³, and a lower crust of 3100 kg/m³. The Transbrazilian Lineament, which separates the Pampia terrane from the R{\´i}o de la Plata craton, is expressed as a zone of low average crustal densities. In an excursion, we demonstrate in another study, that the gravity inversion method developed to obtain intra-crustal density structures, is also applicable to obtain density variations in the uppermost lithospheric mantle. Densities in such sub-crustal depths are difficult to constrain from seismic tomographic models due to smearing of crustal velocities. With the application to the uppermost lithospheric mantle in the north Atlantic, we demonstrate in Tan et al. (2018) that lateral density trends of at least 125\,km width are robustly recovered by the inversion method, thereby providing an important tool for the delineation of subcrustal density trends. Due to the genetic link between subduction, orogenesis and retroarc foreland basins the question rises whether the steady-state assumption is valid in such a dynamic setting. To answer this question, I analysed (i) the impact of subduction on the conductive thermal field of the overlying continental plate, (ii) the differences between the transient and steady-state thermal fields of a geodynamic coupled model. Both studies indicate that the assumption of a thermal steady-state is applicable in most parts of the study area. Within the orogenic wedge, where the assumption cannot be applied, I estimated the transient thermal field based on the results of the conducted analyses. Accordingly, the structural model that had been obtained in the first step, could be used to obtain a 3D conductive steady-state thermal field. The rheological assessment based on this thermal field indicates that the lithosphere of the thin-skinned Subandean ranges is characterised by a relatively strong crust and a weak mantle. Contrarily, the adjacent foreland basin consists of a fully coupled, very strong lithosphere. Thus, shortening in northern Argentina can only be accommodated within the weak lithosphere of the orogen and the Subandean ranges. The analysis suggests that the d{\´e}collements of the fold-and-thrust belt are the shallow continuation of shear zones that reside in the ductile sections of the orogenic crust. Furthermore, the localisation of the faults that provide strain transfer between the deeper ductile crust and the shallower d{\´e}collement is strongly influenced by crustal weak zones such as foliation. In contrast to the northern foreland, the lithosphere of the thick-skinned Sierras Pampeanas is fully coupled and characterised by a strong crust and mantle. The high overall strength prevents the generation of crustal-scale faults by tectonic stresses. Even inherited crustal-scale discontinuities, such as sutures, cannot sufficiently reduce the strength of the lithosphere in order to be reactivated. Therefore, magmatism that had been identified to be a precursor of basement uplift in the Sierras Pampeanas, is the key factor that leads to the broken foreland of this province. Due to thermal weakening, and potentially lubrication of the inherited discontinuities, the lithosphere is locally weakened such that tectonic stresses can uplift the basement blocks. This hypothesis explains both the spatially disparate character of the broken foreland, as well as the observed temporal delay between volcanism and basement block uplift. This dissertation provides for the first time a data-driven 3D model that is consistent with geophysical data and geological observations, and that is able to causally link the thermo-rheological structure of the lithosphere to the observed variation of surface deformation styles in the retroarc foreland of northern Argentina.}, language = {en} } @phdthesis{Radloff2018, author = {Radloff, Katrin}, title = {The role of the fatty acid profile and its modulation by cytokines in the systemic inflammation in cancer cachexia}, school = {Universit{\"a}t Potsdam}, pages = {156}, year = {2018}, abstract = {Systemic inflammation is a hallmark of cancer cachexia. Among tumor-host interactions, the white adipose tissue (WAT) is an important contributor to inflammation as it suffers morphological reorganization and lipolysis, releasing free fatty acids (FA), bioactive lipid mediators (LM) and pro-inflammatory cytokines, which accentuate the activation of pro-inflammatory signaling pathways and the recruitment of immune cells to the tissue. This project aimed to investigate which inflammatory factors are involved in the local adipose tissue inflammation and what is the influence of such factors upon enzymes involved in FA or LM metabolism in healthy individuals (Control), weight stable gastro-intestinal cancer patients (WSC) and cachectic cancer patients (CC). The results demonstrated that the inflammatory signature of systemic inflammation is different from local adipose tissue inflammation. The systemic inflammation of the cachectic cancer patients was characterized by higher levels of circulating saturated fatty acids (SFA), tumor-necrosis-factor-α (TNF-α), interleukins IL-6, IL-8 and CRP while levels of polyunsaturated fatty acids (PUFAs), especially n3-PUFAs, were lower in CC than in the other groups. In vitro and in adipose tissue explants, pro-inflammatory cytokines and SFAs were shown to increase the chemokines IL-8 and CXCL10 that were found to be augmented in adipose tissue inflammation in CC which was more profound in the visceral adipose tissue (VAT) than in subcutaneous adipose tissue (SAT). Systemic inflammation was negatively associated with the expression of PUFA synthesizing enzymes, though gene and protein expression did hardly differ between groups. The effects of inflammatory factors on enzymes in the whole tissue could have been masked by differentiated modulation of the diverse cell types in the same tissue. In vitro experiments showed that the expression of FA-modifying enzymes such as desaturases and elongases in adipocytes and macrophages was regulated into opposing directions by TNF-α, IL-6, LPS or palmitate. The higher plasma concentration of the pro-resolving LM resolvin D1 in CC cannot compensate the overall inflammatory status and the results indicate that inflammatory cytokines interfere with synthesis pathways of pro-resolving LM. In summary, the data revealed a complex inter-tissue and inter-cellular crosstalk mediated by pro-inflammatory cytokines and lipid compounds enhancing inflammation in cancer cachexia by feed-forward mechanisms.}, language = {en} } @phdthesis{Pons2023, author = {Pons, Micha{\"e}l}, title = {The Nature of the tectonic shortening in Central Andes}, doi = {10.25932/publishup-60089}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-600892}, school = {Universit{\"a}t Potsdam}, pages = {160}, year = {2023}, abstract = {The Andean Cordillera is a mountain range located at the western South American margin and is part of the Eastern- Circum-Pacific orogenic Belt. The ~7000 km long mountain range is one of the longest on Earth and hosts the second largest orogenic plateau in the world, the Altiplano-Puna plateau. The Andes are known as a non-collisional subduction-type orogen which developed as a result of the interaction between the subducted oceanic Nazca plate and the South American continental plate. The different Andean segments exhibit along-strike variations of morphotectonic provinces characterized by different elevations, volcanic activity, deformation styles, crustal thickness, shortening magnitude and oceanic plate geometry. Most of the present-day elevation can be explained by crustal shortening in the last ~50 Ma, with the shortening magnitude decreasing from ~300 km in the central (15°S-30°S) segment to less than half that in the southern part (30°S-40°S). Several factors were proposed that might control the magnitude and acceleration of shortening of the Central Andes in the last 15 Ma. One important factor is likely the slab geometry. At 27-33°S, the slab dips horizontally at ~100 km depth due to the subduction of the buoyant Juan Fernandez Ridge, forming the Pampean flat-slab. This horizontal subduction is thought to influence the thermo-mechanical state of the Sierras Pampeanas foreland, for instance, by strengthening the lithosphere and promoting the thick-skinned propagation of deformation to the east, resulting in the uplift of the Sierras Pampeanas basement blocks. The flat-slab has migrated southwards from the Altiplano latitude at ~30 Ma to its present-day position and the processes and consequences associated to its passage on the contemporaneous acceleration of the shortening rate in Central Andes remain unclear. Although the passage of the flat-slab could offer an explanation to the acceleration of the shortening, the timing does not explain the two pulses of shortening at about 15 Ma and 4 Ma that are suggested from geological observations. I hypothesize that deformation in the Central Andes is controlled by a complex interaction between the subduction dynamics of the Nazca plate and the dynamic strengthening and weakening of the South American plate due to several upper plate processes. To test this hypothesis, a detailed investigation into the role of the flat-slab, the structural inheritance of the continental plate, and the subduction dynamics in the Andes is needed. Therefore, I have built two classes of numerical thermo-mechanical models: (i) The first class of models are a series of generic E-W-oriented high-resolution 2D subduction models thatinclude flat subduction in order to investigate the role of the subduction dynamics on the temporal variability of the shortening rate in the Central Andes at Altiplano latitudes (~21°S). The shortening rate from the models was then validated with the observed tectonic shortening rate in the Central Andes. (ii) The second class of models are a series of 3D data-driven models of the present-day Pampean flat-slab configuration and the Sierras Pampeanas (26-42°S). The models aim to investigate the relative contribution of the present-day flat subduction and inherited structures in the continental lithosphere on the strain localization. Both model classes were built using the advanced finite element geodynamic code ASPECT. The first main finding of this work is to suggest that the temporal variability of shortening in the Central Andes is primarily controlled by the subduction dynamics of the Nazca plate while it penetrates into the mantle transition zone. These dynamics depends on the westward velocity of the South American plate that provides the main crustal shortening force to the Andes and forces the trench to retreat. When the subducting plate reaches the lower mantle, it buckles on it-self until the forced trench retreat causes the slab to steepen in the upper mantle in contrast with the classical slab-anchoring model. The steepening of the slab hinders the trench causing it to resist the advancing South American plate, resulting in the pulsatile shortening. This buckling and steepening subduction regime could have been initiated because of the overall decrease in the westwards velocity of the South American plate. In addition, the passage of the flat-slab is required to promote the shortening of the continental plate because flat subduction scrapes the mantle lithosphere, thus weakening the continental plate. This process contributes to the efficient shortening when the trench is hindered, followed by mantle lithosphere delamination at ~20 Ma. Finally, the underthrusting of the Brazilian cratonic shield beneath the orogen occurs at ~11 Ma due to the mechanical weakening of the thick sediments covered the shield margin, and due to the decreasing resistance of the weakened lithosphere of the orogen. The second main finding of this work is to suggest that the cold flat-slab strengthens the overriding continental lithosphere and prevents strain localization. Therefore, the deformation is transmitted to the eastern front of the flat-slab segment by the shear stress operating at the subduction interface, thus the flat-slab acts like an indenter that "bulldozes" the mantle-keel of the continental lithosphere. The offset in the propagation of deformation to the east between the flat and steeper slab segments in the south causes the formation of a transpressive dextral shear zone. Here, inherited faults of past tectonic events are reactivated and further localize the deformation in an en-echelon strike-slip shear zone, through a mechanism that I refer to as "flat-slab conveyor". Specifically, the shallowing of the flat-slab causes the lateral deformation, which explains the timing of multiple geological events preceding the arrival of the flat-slab at 33°S. These include the onset of the compression and of the transition between thin to thick-skinned deformation styles resulting from the crustal contraction of the crust in the Sierras Pampeanas some 10 and 6 Myr before the Juan Fernandez Ridge collision at that latitude, respectively.}, language = {en} } @phdthesis{DeAndradeQueiroz2023, author = {De Andrade Queiroz, Anna Barbara}, title = {The Milky Way disks, bulge, and bar sub-populations}, doi = {10.25932/publishup-59061}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-590615}, school = {Universit{\"a}t Potsdam}, pages = {xii, 187}, year = {2023}, abstract = {In recent decades, astronomy has seen a boom in large-scale stellar surveys of the Galaxy. The detailed information obtained about millions of individual stars in the Milky Way is bringing us a step closer to answering one of the most outstanding questions in astrophysics: how do galaxies form and evolve? The Milky Way is the only galaxy where we can dissect many stars into their high-dimensional chemical composition and complete phase space, which analogously as fossil records can unveil the past history of the genesis of the Galaxy. The processes that lead to large structure formation, such as the Milky Way, are critical for constraining cosmological models; we call this line of study Galactic archaeology or near-field cosmology. At the core of this work, we present a collection of efforts to chemically and dynamically characterise the disks and bulge of our Galaxy. The results we present in this thesis have only been possible thanks to the advent of the Gaia astrometric satellite, which has revolutionised the field of Galactic archaeology by precisely measuring the positions, parallax distances and motions of more than a billion stars. Another, though not less important, breakthrough is the APOGEE survey, which has observed spectra in the near-infrared peering into the dusty regions of the Galaxy, allowing us to determine detailed chemical abundance patterns in hundreds of thousands of stars. To accurately depict the Milky Way structure, we use and develop the Bayesian isochrone fitting tool/code called StarHorse; this software can predict stellar distances, extinctions and ages by combining astrometry, photometry and spectroscopy based on stellar evolutionary models. The StarHorse code is pivotal to calculating distances where Gaia parallaxes alone cannot allow accurate estimates. We show that by combining Gaia, APOGEE, photometric surveys and using StarHorse, we can produce a chemical cartography of the Milky way disks from their outermost to innermost parts. Such a map is unprecedented in the inner Galaxy. It reveals a continuity of the bimodal chemical pattern previously detected in the solar neighbourhood, indicating two populations with distinct formation histories. Furthermore, the data reveals a chemical gradient within the thin disk where the content of 𝛼-process elements and metals is higher towards the centre. Focusing on a sample in the inner MW we confirm the extension of the chemical duality to the innermost regions of the Galaxy. We find stars with bar shape orbits to show both high- and low-𝛼 abundances, suggesting the bar formed by secular evolution trapping stars that already existed. By analysing the chemical orbital space of the inner Galactic regions, we disentangle the multiple populations that inhabit this complex region. We reveal the presence of the thin disk, thick disk, bar, and a counter-rotating population, which resembles the outcome of a perturbed proto-Galactic disk. Our study also finds that the inner Galaxy holds a high quantity of super metal-rich stars up to three times solar suggesting it is a possible repository of old super-metal-rich stars found in the solar neighbourhood. We also enter into the complicated task of deriving individual stellar ages. With StarHorse, we calculate the ages of main-sequence turn-off and sub-giant stars for several public spectroscopic surveys. We validate our results by investigating linear relations between chemical abundances and time since the 𝛼 and neutron capture elements are sensitive to age as a reflection of the different enrichment timescales of these elements. For further study of the disks in the solar neighbourhood, we use an unsupervised machine learning algorithm to delineate a multidimensional separation of chrono-chemical stellar groups revealing the chemical thick disk, the thin disk, and young 𝛼-rich stars. The thick disk is shown to have a small age dispersion indicating its fast formation contrary to the thin disk that spans a wide range of ages. With groundbreaking data, this thesis encloses a detailed chemo-dynamical view of the disk and bulge of our Galaxy. Our findings on the Milky Way can be linked to the evolution of high redshift disk galaxies, helping to solve the conundrum of galaxy formation.}, language = {en} } @phdthesis{Ketzer2024, author = {Ketzer, Laura}, title = {The impact of stellar activity evolution on atmospheric mass loss of young exoplanets}, doi = {10.25932/publishup-62681}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-626819}, school = {Universit{\"a}t Potsdam}, pages = {x, 208}, year = {2024}, abstract = {The increasing number of known exoplanets raises questions about their demographics and the mechanisms that shape planets into how we observe them today. Young planets in close-in orbits are exposed to harsh environments due to the host star being magnetically highly active, which results in high X-ray and extreme UV fluxes impinging on the planet. Prolonged exposure to this intense photoionizing radiation can cause planetary atmospheres to heat up, expand and escape into space via a hydrodynamic escape process known as photoevaporation. For super-Earth and sub-Neptune-type planets, this can even lead to the complete erosion of their primordial gaseous atmospheres. A factor of interest for this particular mass-loss process is the activity evolution of the host star. Stellar rotation, which drives the dynamo and with it the magnetic activity of a star, changes significantly over the stellar lifetime. This strongly affects the amount of high-energy radiation received by a planet as stars age. At a young age, planets still host warm and extended envelopes, making them particularly susceptible to atmospheric evaporation. Especially in the first gigayear, when X-ray and UV levels can be 100 - 10,000 times higher than for the present-day sun, the characteristics of the host star and the detailed evolution of its high-energy emission are of importance. In this thesis, I study the impact of stellar activity evolution on the high-energy-induced atmospheric mass loss of young exoplanets. The PLATYPOS code was developed as part of this thesis to calculate photoevaporative mass-loss rates over time. The code, which couples parameterized planetary mass-radius relations with an analytical hydrodynamic escape model, was used, together with Chandra and eROSITA X-ray observations, to investigate the future mass loss of the two young multiplanet systems V1298 Tau and K2-198. Further, in a numerical ensemble study, the effect of a realistic spread of activity tracks on the small-planet radius gap was investigated for the first time. The works in this thesis show that for individual systems, in particular if planetary masses are unconstrained, the difference between a young host star following a low-activity track vs. a high-activity one can have major implications: the exact shape of the activity evolution can determine whether a planet can hold on to some of its atmosphere, or completely loses its envelope, leaving only the bare rocky core behind. For an ensemble of simulated planets, an observationally-motivated distribution of activity tracks does not substantially change the final radius distribution at ages of several gigayears. My simulations indicate that the overall shape and slope of the resulting small-planet radius gap is not significantly affected by the spread in stellar activity tracks. However, it can account for a certain scattering or fuzziness observed in and around the radius gap of the observed exoplanet population.}, language = {en} } @phdthesis{Kerutt2019, author = {Kerutt, Josephine Victoria}, title = {The high-redshift voyage of Lyman alpha and Lyman continuum emission as told by MUSE}, doi = {10.25932/publishup-47881}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-478816}, school = {Universit{\"a}t Potsdam}, pages = {152}, year = {2019}, abstract = {Most of the matter in the universe consists of hydrogen. The hydrogen in the intergalactic medium (IGM), the matter between the galaxies, underwent a change of its ionisation state at the epoch of reionisation, at a redshift roughly between 6>z>10, or ~10^8 years after the Big Bang. At this time, the mostly neutral hydrogen in the IGM was ionised but the source of the responsible hydrogen ionising emission remains unclear. In this thesis I discuss the most likely candidates for the emission of this ionising radiation, which are a type of galaxy called Lyman alpha emitters (LAEs). As implied by their name, they emit Lyman alpha radiation, produced after a hydrogen atom has been ionised and recombines with a free electron. The ionising radiation itself (also called Lyman continuum emission) which is needed for this process inside the LAEs could also be responsible for ionising the IGM around those galaxies at the epoch of reionisation, given that enough Lyman continuum escapes. Through this mechanism, Lyman alpha and Lyman continuum radiation are closely linked and are both studied to better understand the properties of high redshift galaxies and the reionisation state of the universe. Before I can analyse their Lyman alpha emission lines and the escape of Lyman continuum emission from them, the first step is the detection and correct classification of LAEs in integral field spectroscopic data, specifically taken with the Multi-Unit Spectroscopic Explorer (MUSE). After detecting emission line objects in the MUSE data, the task of classifying them and determining their redshift is performed with the graphical user interface QtClassify, which I developed during the work on this thesis. It uses the strength of the combination of spectroscopic and photometric information that integral field spectroscopy offers to enable the user to quickly identify the nature of the detected emission lines. The reliable classification of LAEs and determination of their redshifts is a crucial first step towards an analysis of their properties. Through radiative transfer processes, the properties of the neutral hydrogen clouds in and around LAEs are imprinted on the shape of the Lyman alpha line. Thus after identifying the LAEs in the MUSE data, I analyse the properties of the Lyman alpha emission line, such as the equivalent width (EW) distribution, the asymmetry and width of the line as well as the double peak fraction. I challenge the common method of displaying EW distributions as histograms without taking the limits of the survey into account and construct a more independent EW distribution function that better reflects the properties of the underlying population of galaxies. I illustrate this by comparing the fraction of high EW objects between the two surveys MUSE-Wide and MUSE-Deep, both consisting of MUSE pointings (each with the size of one square arcminute) of different depths. In the 60 MUSE-Wide fields of one hour exposure time I find a fraction of objects with extreme EWs above EW_0>240A of ~20\%, while in the MUSE-Deep fields (9 fields with an exposure time of 10 hours and one with an exposure time of 31 hours) I find a fraction of only ~1\%, which is due to the differences in the limiting line flux of the surveys. The highest EW I measure is EW_0 = 600.63 +- 110A, which hints at an unusual underlying stellar population, possibly with a very low metallicity. With the knowledge of the redshifts and positions of the LAEs detected in the MUSE-Wide survey, I also look for Lyman continuum emission coming from these galaxies and analyse the connection between Lyman continuum emission and Lyman alpha emission. I use ancillary Hubble Space Telescope (HST) broadband photometry in the bands that contain the Lyman continuum and find six Lyman continuum leaker candidates. To test whether the Lyman continuum emission of LAEs is coming only from those individual objects or the whole population, I select LAEs that are most promising for the detection of Lyman continuum emission, based on their rest-frame UV continuum and Lyman alpha line shape properties. After this selection, I stack the broadband data of the resulting sample and detect a signal in Lyman continuum with a significance of S/N = 5.5, pointing towards a Lyman continuum escape fraction of ~80\%. If the signal is reliable, it strongly favours LAEs as the providers of the hydrogen ionising emission at the epoch of reionisation and beyond.}, language = {en} } @phdthesis{Rinne2024, author = {Rinne, Theresa Charlotte}, title = {The effects of nutrients on bone stem cell function and regeneration}, school = {Universit{\"a}t Potsdam}, pages = {V, 134}, year = {2024}, abstract = {Aging is associated with bone loss, which can lead to osteoporosis and high fracture risk. This coincides with the enhanced formation of bone marrow adipose tissue (BMAT), suggesting a negative effect of bone marrow adipocytes on skeletal health. Increased BMAT formation is also observed in pathologies such as obesity, type 2 diabetes and osteoporosis. However, a subset of bone marrow adipocytes forming the constitutive BMAT (cBMAT), arise early in life in the distal skeleton, contain high levels of unsaturated fatty acids and are thought to provide a physiological function. Regulated BMAT (rBMAT) forms during aging and obesity in proximal regions of the bone and contain a large proportion of saturated fatty acids. Paradoxically, BMAT accumulation is also enhanced during caloric restriction (CR), a life-span extending dietary intervention. This indicates, that different types of BMAT can form in response to opposing nutritional stimuli with potentially different functions. To this end, two types of nutritional interventions, CR and high fat diet (HFD), that are both described to induce BMAT accumulation were carried out. CR markedly increased BMAT formation in the proximal tibia and led to a higher proportion of unsaturated fatty acids, making it similar to the physiological cBMAT. Additionally, proximal and diaphyseal tibia regions displayed higher adiponectin expression. In aged mice, CR was associated with an improved trabecular bone structure. Taken together, these findings demonstrate, that the type of BMAT that forms during CR might provide beneficial effects for local bone stem/progenitor cells and metabolic health. The HFD intervention performed in this thesis showed no effect on BMAT accumulation and bone microstructure. RNA Seq analysis revealed alterations in the composition of the collagen-containing extracellular matrix (ECM). In order to investigate the effects of glucose homeostasis on osteogenesis, differentiation capacity of immortalized multipotent mesenchymal stromal cells (MSCs) and osteochondrogenic progenitor cells (OPCs) was analyzed. Insulin improved differentiation in both cell types, however, combination of with a high glucose concentration led to an impaired mineralization of the ECM. In the MSCs, this was accompanied by the formation of adipocytes, indicating negative effects of the adipocytes formed during hyperglycemic conditions on mineralization processes. However, the altered mineralization pattern and structure of the ECM was also observed in OPCs, which did not form any adipocytes, suggesting further negative effects of a hyperglycemic environment on osteogenic differentiation. In summary, the work provided in this thesis demonstrated that differentiation commitment of bone-resident stem cells can be altered through nutrient availability, specifically glucose. Surprisingly, both high nutrient supply, e.g. the hyperglycemic cell culture conditions, and low nutrient supply, e.g. CR, can induce adipogenic differentiation. However, while CR-induced adipocyte formation was associated with improved trabecular bone structure, adipocyte formation in a hyperglycemic cell-culture environment hampered mineralization. This thesis provides further evidence for the existence of different types of BMAT with specific functions.}, language = {en} } @phdthesis{Regel2008, author = {Regel, Stefanie}, title = {The comprehension of figurative language : electrophysiological evidence on the processing of irony}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33376}, school = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {Diese Dissertation untersucht das Verstehen figurativer Sprache, im Besonderen die zeitliche Verarbeitung von verbaler Ironie. In sechs Experimenten wurde mittels ereignis-korrelierter Potentiale (EKP) die Gehirnaktivit{\"a}t beim Verstehen ironischer {\"A}ußerungen im Vergleich zu entsprechenden nicht-ironischen {\"A}ußerungen gemessen und analysiert. Dar{\"u}berhinaus wurde der Einfluss verschiedener sprachbegleitender Hinweisreize, z.B. von Prosodie oder der Verwendung von Satzzeichen, sowie außersprachlicher Hinweisreize, wie bspw. pragmatischen Wissens, auf das Ironieverstehen untersucht. Auf Grundlage dieser Ergebnisse werden verschiedene psycholinguistische Modelle figurativer Sprachverarbeitung, d.h. 'standard pragmatic model', 'graded salience hypothesis', sowie 'direct access view', diskutiert.}, language = {en} } @phdthesis{Kim2023, author = {Kim, Jiyong}, title = {Synthesis of InP quantum dots and their applications}, doi = {10.25932/publishup-58535}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-585351}, school = {Universit{\"a}t Potsdam}, pages = {XIX, 142}, year = {2023}, abstract = {Technologically important, environmentally friendly InP quantum dots (QDs) typically used as green and red emitters in display devices can achieve exceptional photoluminescence quantum yields (PL QYs) of near-unity (95-100\%) when the-state-of-the-art core/shell heterostructure of the ZnSe inner/ZnS outer shell is elaborately applied. Nevertheless, it has only led to a few industrial applications as QD liquid crystal display (QD-LCD) which is applied to blue backlight units, even though QDs has a lot of possibilities that able to realize industrially feasible applications, such as QD light-emitting diodes (QD‒LEDs) and luminescence solar concentrator (LSC), due to their functionalizable characteristics. Before introducing the main research, the theoretical basis and fundamentals of QDs are described in detail on the basis of the quantum mechanics and experimental synthetic results, where a concept of QD and colloidal QD, a type-I core/shell structure, a transition metal doped semiconductor QDs, the surface chemistry of QD, and their applications (LSC, QD‒LEDs, and EHD jet printing) are sequentially elucidated for better understanding. This doctoral thesis mainly focused on the connectivity between QD materials and QD devices, based on the synthesis of InP QDs that are composed of inorganic core (core/shell heterostructure) and organic shell (surface ligands on the QD surface). In particular, as for the former one (core/shell heterostructure), the ZnCuInS mid-shell as an intermediate layer is newly introduced between a Cu-doped InP core and a ZnS shell for LSC devices. As for the latter one (surface ligands), the ligand effect by 1-octanethiol and chloride ion are investigated for the device stability in QD‒LEDs and the printability of electro-hydrodynamic (EHD) jet printing system, in which this research explores the behavior of surface ligands, based on proton transfer mechanism on the QD surface. Chapter 3 demonstrates the synthesis of strain-engineered highly emissive Cu:InP/Zn-Cu-In-S (ZCIS)/ZnS core/shell/shell heterostructure QDs via a one-pot approach. When this unconventional combination of a ZCIS/ZnS double shelling scheme is introduced to a series of Cu:InP cores with different sizes, the resulting Cu:InP/ZCIS/ZnS QDs with a tunable near-IR PL range of 694-850 nm yield the highest-ever PL QYs of 71.5-82.4\%. These outcomes strongly point to the efficacy of the ZCIS interlayer, which makes the core/shell interfacial strain effectively alleviated, toward high emissivity. The presence of such an intermediate ZCIS layer is further examined by comparative size, structural, and compositional analyses. The end of this chapter briefly introduces the research related to the LSC devices, fabricated from Cu:InP/ZCIS/ZnS QDs, currently in progress. Chapter 4 mainly deals with ligand effect in 1-octanethiol passivation of InP/ZnSe/ZnS QDs in terms of incomplete surface passivation during synthesis. This chapter demonstrates the lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanthiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bound on the incomplete QD surface. The systematic chemical analyses, such as thermogravimetric analysis‒mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD‒LEDs). Chapter 5 shows the relation between material stability of QDs and device stability of QD‒LEDs through the investigation of surface chemistry and shell thickness. In typical III-V colloidal InP quantum dots (QDs), an inorganic ZnS outermost shell is used to provide stability when overcoated onto the InP core. However, this work presents a faster photo-degradation of InP/ZnSe/ZnS QDs with a thicker ZnS shell than that with a thin ZnS shell when 1-octanethiol was applied as a sulfur source to form ZnS outmost shell. Herein, 1-octanethiol induces the form of weakly-bound carboxylate ligand via proton transfer on the QD surface, resulting in a faster degradation at UV light even though a thicker ZnS shell was formed onto InP/ZnSe QDs. Detailed insight into surface chemistry was obtained from proton nuclear magnetic resonance spectroscopy and thermogravimetric analysis-mass spectrometry. However, the lifetimes of the electroluminescence devices fabricated from InP/ZnSe/ZnS QDs with a thick or a thin ZnS shell show surprisingly the opposite result to the material stability of QDs, where the QD light-emitting diodes (QD‒LEDs) with a thick ZnS shelled QDs maintained its luminance more stable than that with a thin ZnS shelled QDs. This study elucidates the degradation mechanism of the QDs and the QD light-emitting diodes based on the results and discuss why the material stability of QDs is different from the lifetime of QD‒LEDs. Chapter 6 suggests a method how to improve a printability of EHD jet printing when QD materials are applied to QD ink formulation, where this work introduces the application of GaP mid-shelled InP QDs as a role of surface charge in EHD jet printing technique. In general, GaP intermediate shell has been introduced in III-V colloidal InP quantum dots (QDs) to enhance their thermal stability and quantum efficiency in the case of type-I core/shell/shell heterostructure InP/GaP/ZnSeS QDs. Herein, these highly luminescent InP/GaP/ZnSeS QDs were synthesized and applied to EHD jet printing, by which this study demonstrates that unreacted Ga and Cl ions on the QD surface induce the operating voltage of cone jet and cone jet formation to be reduced and stabilized, respectively. This result indicates GaP intermediate shell not only improves PL QY and thermal stability of InP QDs but also adjusts the critical flow rate required for cone-jet formation. In other words, surface charges of quantum dots can have a significant role in forming cone apex in the EHD capillary nozzle. For an industrially convenient validation of surface charges on the QD surface, Zeta potential analyses of QD solutions as a simple method were performed, as well as inductively coupled plasma optical emission spectrometry (ICP-OES) for a composition of elements. Beyond the generation of highly emissive InP QDs with narrow FWHM, these studies talk about the connection between QD material and QD devices not only to make it a vital jumping-off point for industrially feasible applications but also to reveal from chemical and physical standpoints the origin that obstructs the improvement of device performance experimentally and theoretically.}, language = {en} } @phdthesis{Imranulhaq2008, author = {Imran ul-haq, Muhammad}, title = {Synthesis of fluorinated polymers in supercritical carbon dioxide (scCO₂)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-19868}, school = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {For the first time stabilizer-free vinylidene fluoride (VDF) polymerizations were carried out in homogeneous phase with supercritical CO₂. Polymerizations were carried out at 140°C, 1500 bar and were initiated with di-tert-butyl peroxide (DTBP). In-line FT-NIR (Fourier Transform- Near Infrared) spectroscopy showed that complete monomer conversion may be obtained. Molecular weights were determined via size-exclusion chromatography (SEC) and polymer end group analysis by 1H-NMR spectroscopy. The number average molecular weights were below 104 g∙mol-1 and polydispersities ranged from 3.1 to 5.7 depending on DTBP and VDF concentration. To allow for isothermal reactions high CO₂ contents ranging from 61 to 83 wt.\% were used. The high-temperature, high-pressure conditions were required for homogeneous phase polymerization. These conditions did not alter the amount of defects in VDF chaining. Scanning electron microscopy (SEM) indicated that regular stack-type particles were obtained upon expansion of the homogeneous polymerization mixture. To reduce the required amount of initiator, further VDF polymerizations using chain transfer agents (CTAs) to control molecular weights were carried out in homogeneous phase with supercritical carbon dioxide (scCO₂) at 120 °C and 1500 bar. Using perfluorinated hexyl iodide as CTA, polymers of low polydispersity ranging from 1.5 to 1.2 at the highest iodide concentration of 0.25 mol·L-1 were obtained. Electrospray ionization- mass spectroscopy (ESI-MS) indicates the absence of initiator derived end groups, supporting livingness of the system. The "livingness" is based on the labile C-I bond. However, due to the weakness of the C-I bond perfluorinated hexyl iodide also contributes to initiation. To allow for kinetic analyses of VDF polymerizations the CTA should not contribute to initiation. Therefore, additional CTAs were applied: BrCCl3, C6F13Br and C6F13H. It was found that C6F13H does not contribute to initiation. At 120°C and 1500 bar kp/kt0.5~ 0.64 (L·mol-1·s-1)0.5 was derived. The chain transfer constant (CT) at 120°C has been determined to be 8·10-1, 9·10-2 and 2·10-4 for C6F13I, C6F13Br and C6F13H, respectively. These CT values are associated with the bond energy of the C-X bond. Moreover, the labile C-I bond allows for functionalization of the polymer to triazole end groups applying click reactions. After substitution of the iodide end group by an azide group 1,3 dipolar cycloadditions with alkynes yield polymers with 1,2,3 triazole end groups. Using symmetrical alkynes the reactions may be carried out in the absence of any catalyst. This end-functionalized poly (vinylidene fluoride) (PVDF) has higher thermal stability as compared to the normal PVDF. PVDF samples from homogeneous phase polymerizations in supercritical CO₂ and subsequent expansion to ambient conditions were analyzed with respect to polymer end groups, crystallinity, type of polymorphs and morphology. Upon expansion the polymer was obtained as white powder. Scanning electron microscopy (SEM) showed that DTBP derived polymer end groups led to stack-type particles whereas sponge- or rose-type particles were obtained in case of CTA fragments as end groups. Fourier-Transform Infrared spectroscopy and wide angle X-ray diffraction indicated that the type of polymorph, α or β crystal phase was significantly affected by the type of end group. The content of β-phase material, which is responsible for piezoelectricity of PVDF, is the highest for polymer with DTBP-derived end groups. In addition, the crystallinity of the material, as determined via differential scanning calorimetry is affected by the end groups and polymer molecular weights. For example, crystallinity ranges from around 26 \% for DTBP-derived end groups to a maximum of 62 \% for end groups originating from perfluorinated hexyl iodide for polymers with Mn ~2200 g·mol-1. Expansion of the homogeneous polymerization mixture results in particle formation by a non-optimized RESS (Rapid Expansion from Supercritical Solution) process. Thus, it was tested how polymer end groups affect the particles size distribution obtained from RESS process under controlled conditions (T = 50°C and P = 200 bar). In all RESS experiments, small primary PVDF with diameters less than 100 nm without the use of liquid solvents, surfactants, or other additives were produced. A strong correlation between particle size and particle size distribution with polymer end groups and molecular weight of the original material was observed. The smallest particles were found for RESS of PVDF with Mn~ 4000 g·mol-1 and PFHI (C6F13I) - derived end groups.}, language = {en} } @phdthesis{Zhang2019, author = {Zhang, Shuhao}, title = {Synthesis and self-assembly of protein-polymer conjugates for the preparation of biocatalytically active membranes}, school = {Universit{\"a}t Potsdam}, pages = {VIII, 161}, year = {2019}, abstract = {This thesis covers the synthesis of conjugates of 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) with suitable polymers and the subsequent immobilization of these conjugates in thin films via two different approaches. 2-Deoxy-D-ribose-5-phosphate aldolase (DERA) is a biocatalyst that is capable of converting acetaldehyde and a second aldehyde as acceptor into enantiomerically pure mono- and diyhydroxyaldehydes, which are important structural motifs in a number of pharmaceutically active compounds. Conjugation and immobilization renders the enzyme applicable for utilization in a continuously run biocatalytic process which avoids the common problem of product inhibition. Within this thesis, conjugates of DERA and poly(N-isopropylacrylamide) (PNIPAm) for immobilization via a self-assembly approach were synthesized and isolated, as well as conjugates with poly(N,N-dimethylacrylamide) (PDMAA) for a simplified and scalable spray-coating approach. For the DERA/PNIPAm-conjugates different synthesis routes were tested, including grafting-from and grafting-to, both being common methods for the conjugation. Furthermore, both lysines and cysteines were addressed for the conjugation in order to find optimum conjugation conditions. It turned out that conjugation via lysine causes severe activity loss as one lysine plays a key role in the catalyzing mechanism. The conjugation via the cysteines by a grafting-to approach using pyridyl disulfide (PDS) end-group functionalized polymers led to high conjugation efficiencies in the presence of polymer solubilizing NaSCN. The resulting conjugates maintained enzymatic activity and also gained high acetaldehyde tolerance which is necessary for their use later on in an industrial relevant process after their immobilization. The resulting DERA/PNIPAm conjugates exhibited enhanced interfacial activity at the air/water interface compared to the single components, which is an important pre-requisite for the immobilization via the self-assembly approach. Conjugates with longer polymer chains formed homogeneous films on silicon wafers and glass slides while the ones with short chains could only form isolated aggregates. On top of that, long chain conjugates showed better activity maintenance upon the immobilization. The crosslinking of conjugates, as well as their fixation on the support materials, are important for the mechanical stability of the films obtained from the self-assembly process. Therefore, in a second step, we introduced the UV-crosslinkable monomer DMMIBA to the PNIPAm polymers to be used for conjugation. The introduction of DMMIBA reduced the lower critical solution temperature (LCST) of the polymer and thus the water solubility at ambient conditions, resulting in lower conjugation efficiencies and in turn slightly poorer acetaldehyde tolerance of the resulting conjugates. Unlike the DERA/PNIPAm, the conjugates from the copolymer P(NIPAM-co-DMMIBA) formed continuous, homogenous films only after the crosslinking step via UV-treatment. For a firm binding of the crosslinked films, a functionalization protocol for the model support material cyclic olefin copolymer (COC) and the final target support, PAN based membranes, was developed that introduces analogue UV-reactive groups to the support surface. The conjugates immobilized on the modified COC films maintained enzymatic activity and showed good mechanical stability after several cycles of activity assessment. Conjugates with longer polymer chains, however, showed a higher degree of crosslinking after the UV-treatment leading to a pronounced loss of activity. A porous PAN membrane onto which the conjugates were immobilized as well, was finally transferred to a dead end filtration membrane module to catalyze the aldol reaction of the industrially relevant mixture of acetaldehyde and hexanal in a continuous mode. Mono aldol product was detectable, but yields were comparably low and the operational stability needs to be further improved Another approach towards immobilization of DERA conjugates that was followed, was to generate the conjugates in situ by simply mixing enzyme and polymer and spray coat the mixture onto the membrane support. Compared to the previous approach, the focus was more put on simplicity and a possible scalability of the immobilization. Conjugates were thus only generated in-situ and not further isolated and characterized. For the conjugation, PDMAA equipped with N-2-thiolactone acrylamide (TlaAm) side chains was used, an amine-reactive comonomer that can react with the lysine residues of DERA, as well as with amino groups introduced to a desired support surface. Furthermore disulfide formation after hydrolysis of the Tla groups causes a crosslinking effect. The synthesized copolymer poly(N,N-Dimethylacrylamide-co-N-2-thiolactone acrylamide) (P(DMAA-co-TlaAm)) thus serves a multiple purpose including protein binding, crosslinking and binding to support materials. The mixture of DERA and polymer could be immobilized on the PAN support by spray-coating under partial maintenance of enzymatic activity. To improve the acetaldehyde tolerance, the polymer in used was further equipped with cysteine reactive PDS end-groups that had been used for the conjugation as described in the first part of the thesis. The generated conjugates indeed showed good acetaldehyde tolerance and were thus used to be coated onto PAN membrane supports. Post treatment with a basic aqueous solution of H2O2 was supposed to further crosslink the spray-coated film hydrolysis and oxidation of the thiolactone groups. However, a washing off of the material was observed. Optimization is thus still necessary.}, language = {en} } @phdthesis{Milke2012, author = {Milke, Bettina}, title = {Synthese von Metallnitrid- und Metalloxinitridnanopartikeln f{\"u}r energierelevante Anwendungen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60008}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {Ein viel diskutiertes Thema unserer Zeit ist die Zukunft der Energiegewinnung und Speicherung. Dabei nimmt die Nanowissenschaft eine bedeutende Rolle ein; sie f{\"u}hrt zu einer Effizienzsteigerung bei der Speicherung und Gewinnung durch bereits bekannte Materialien und durch neue Materialien. In diesem Zusammenhang ist die Chemie Wegbereiter f{\"u}r Nanomaterialien. Allerdings f{\"u}hren bisher die meisten bekannten Synthesen von Nanopartikeln zu undefinierten Partikeln. Eine einfache, kosteng{\"u}nstige und sichere Synthese w{\"u}rde die M{\"o}glichkeit einer breiten Anwendung und Skalierbarkeit bieten. In dieser Arbeit soll daher die Darstellung der einfachen Synthese von Mangannitrid-, Aluminiumnitrid-, Lithiummangansilicat-, Zirkonium-oxinitrid- und Mangancarbonatnanopartikel betrachtet werden. Dabei werden die sogenannte Harnstoff-Glas-Route als eine Festphasensynthese und die Solvothermalsynthese als typische Fl{\"u}ssigphasensynthese eingesetzt. Beide Synthesewege f{\"u}hren zu definierten Partikelgr{\"o}ßen und interessanten Morphologien und erm{\"o}glichen eine Einflussnahme auf die Produkte. Im Falle der Synthese der Mangannitridnanopartikel mithilfe der Harnstoff-Glas-Route f{\"u}hrt diese zu Nanopartikeln mit Kern-H{\"u}lle-Struktur, deren Einsatz als Konversionsmaterial erstmalig vorgestellt wird. Mit dem Ziel einer leichteren Anwendung von Nanopartikeln wird eine einfache Beschichtung von Oberfl{\"a}chen mit Nanopartikeln mithilfe der Rotationsbeschichtung beschrieben. Es entstand ein Gemisch aus MnN0,43/MnO-Nanopartikeln, eingebettet in einem Kohlenstofffilm, dessen Untersuchung als Konversionsmaterial hohe spezifische Kapazit{\"a}ten (811 mAh/g) zeigt, die die von dem konventionellen Anodenmaterial Graphit (372 mAh/g) {\"u}bersteigt. Neben der Synthese des Anodenmaterials wurde ebenfalls die des Kathodenmaterials Li2MnSiO4-Nanopartikeln mithilfe der Harnstoff-Glas-Route vorgestellt. Mithilfe der Synthese von Zirkoniumoxinitridnanopartikeln Zr2ON2 kann eine einfache Einflussnahme auf das gew{\"u}nschte Produkt durch die Variation derReaktionsbedingungen, wie Harnstoffmenge oder Reaktionstemperatur, bei der Harnstoff-Glas-Route demonstriert werden. Der Zusatz von kleinsten Mengen an Ammoniumchlorid vermeidet, dass sich Kohlenstoff im Endprodukt bildet und f{\"u}hrt so zu gelben Zr2ON2-Nanopartikeln mit einer Gr{\"o}ße d = 8 nm, die Halbleitereigen-schaften besitzen. Die Synthese von Aluminiumnitridnanopartikeln f{\"u}hrt zu kristallinen Nanopartikeln, die in eine amorphe Matrix eingebettet sind. Die Solvothermalsynthese von Mangancarbonatnanopartikel l{\"a}sst neue Morphologien in Form von Nanost{\"a}bchen entstehen, die zu schuppenartigen sph{\"a}rischen {\"U}berstrukturen agglomeriert sind.}, language = {de} } @phdthesis{ChaleawlertUmpon2018, author = {Chaleawlert-Umpon, Saowaluk}, title = {Sustainable electrode materials based on lignin}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-411793}, school = {Universit{\"a}t Potsdam}, pages = {114}, year = {2018}, abstract = {The utilization of lignin as renewable electrode material for electrochemical energy storage is a sustainable approach for future batteries and supercapacitors. The composite electrode was fabricated from Kraft lignin and conductive carbon and the charge storage contribution was determined in terms of electrical double layer (EDL) and redox reactions. The important factors at play for achieving high faradaic charge storage capacity contribute to high surface area, accessibility of redox sites in lignin and their interaction with conductive additives. A thinner layer of lignin covering the high surface area of carbon facilitates the electron transfer process with a shorter pathway from the active sites of nonconductive lignin to the current collector leading to the improvement of faradaic charge storage capacity. Composite electrodes from lignin and carbon would be even more sustainable if the fluorinated binder can be omitted. A new route to fabricate a binder-free composite electrode from Kraft lignin and high surface area carbon has been proposed by crosslinking lignin with glyoxal. A high molecular weight of lignin is obtained to enhance both electroactivity and binder capability in composite electrodes. The order of the processing step of crosslinking lignin on the composite electrode plays a crucial role in achieving a stable electrode and high charge storage capacity. The crosslinked lignin based electrodes are promising since they allow for more stable, sustainable, halogen-free and environmentally benign devices for energy storage applications. Furthermore, improvement of the amount of redox active groups (quinone groups) in lignin is useful to enhance the capacity in lithium battery applications. Direct oxidative demethylation by cerium ammonium nitrate has been carried out under mild conditions. This proves that an increase of quinone groups is able to enhance the performance of lithium battery. Thus, lignin is a promising material and could be a good candidate for application in sustainable energy storage devices.}, language = {en} } @phdthesis{Andersen2005, author = {Andersen, Audr{\´e}e}, title = {Surfactant dynamics at interfaces : a series of second harmonic generation experiments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6553}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants.}, subject = {Tensid}, language = {en} } @phdthesis{Gressel2008, author = {Gressel, Oliver}, title = {Supernova-driven turbulence and magnetic field amplification in disk galaxies}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29094}, school = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {Supernovae are known to be the dominant energy source for driving turbulence in the interstellar medium. Yet, their effect on magnetic field amplification in spiral galaxies is still poorly understood. Analytical models based on the uncorrelated-ensemble approach predicted that any created field will be expelled from the disk before a significant amplification can occur. By means of direct simulations of supernova-driven turbulence, we demonstrate that this is not the case. Accounting for vertical stratification and galactic differential rotation, we find an exponential amplification of the mean field on timescales of 100Myr. The self-consistent numerical verification of such a "fast dynamo" is highly beneficial in explaining the observed strong magnetic fields in young galaxies. We, furthermore, highlight the importance of rotation in the generation of helicity by showing that a similar mechanism based on Cartesian shear does not lead to a sustained amplification of the mean magnetic field. This finding impressively confirms the classical picture of a dynamo based on cyclonic turbulence.}, language = {en} } @phdthesis{Scholz2012, author = {Scholz, Markus Reiner}, title = {Spin polarization, circular dichroism, and robustness of topological surface states}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-96686}, school = {Universit{\"a}t Potsdam}, pages = {153}, year = {2012}, abstract = {Dreidimensionale topologische Isolatoren sind ein neues Materialsystem, welches dadurch charakterisiert ist, dass es in seinem Inneren isolierend an der Ober {\"a}che jedoch leitend ist. Urs{\"a}chlich f{\"u}r die Leitf{\"a}higkeit an der Ober {\"a}che sind sogenannte topologische Ober- {\"a}chenzust{\"a}nde, welche das Valenzband des Inneren mit dem Leitungsband des Inneren verbinden. An der Ober {\"a}che ist also die Bandl{\"u}cke, welche die isolierende Eigenschaft verursacht, geschlossen. Die vorliegende Arbeit untersucht diese Ober {\"a}chenzust{\"a}nde mittels spin- und winkelauf- gel{\"o}ster Photoemissionsspektroskopie. Es wird gezeigt, dass in den Materialien Bi2Se3 und Bi2Te3, in {\"u}bereinstimmung mit der Literatur, die entscheidenden Charakteristika eines topologischen Ober {\"a}chenzustands vorzu nden sind: Die Ober {\"a}chenzust{\"a}nde dieser Sys- teme durchqueren die Bandl{\"u}cke in ungerader Anzahl, sie sind nicht entartet und weisen folgerichtig eine hohe Spinpolarisation auf. Weiterhin wird durch Aufdampfen diverser Adsorbate gezeigt, dass der Ober {\"a}chenzust{\"a}n- de von Bi2Se3 und Bi2Te3, wie erwartet, extrem robust ist. Ober {\"a}chenzust{\"a}nde topologisch trivialer Systeme erf{\"u}llen diese Eigenschaft nicht; bereits kleine Verunreinigungen k{\"o}n- nen diese Zust{\"a}nde zerst{\"o}ren, bzw. die Ober {\"a}che isolierend machen. Die topologischen Ober {\"a}chenzust{\"a}nde k{\"o}nnen in der vorliegenden Arbeit noch bis zur Detektionsgrenze der experimentellen Messmethode nachgewiesen werden und die Ober {\"a}che bleibt Leitf{\"a}hig. Unter den Adsorbaten be ndet sich auch Eisen, ein bekanntermaßen magnetisches Materi- al. Eine der Grundvoraussetzungen f{\"u}r topologische Isolatoren ist die Zeitumkehrsymme- trie, die Elektronen, welche den topologischen Ober {\"a}chenzustand besetzen, vorschreibt, dass sie eine bestimmte Spinrichtung haben m{\"u}ssen, wenn sie sich beispielsweise nach links bewegen und den entgegengesetzten Spin wenn sie sich nach rechts bewegen. In magnetischen Materialien ist die Zeitumkehrsymmetrie jedoch explizit gebrochen und die gezeigte Robustheit des Ober {\"a}chenzustands gegen magnetische Materialien daher uner- wartet. Die Zeitumkehrsymmetrie sorgt auch daf{\"u}r, dass eine Streuung der Elektronen um 180°, beispielsweise an einem Gitterdefekt oder an einem Phonon strikt verboten ist. Bei einem solchen Streuprozess bleibt die Spinrichtung erhalten, da aber in der Gegenrichtung nur Zust{\"a}nde mit entgegengesetztem Spin vorhanden sind kann das Elektron nicht in diese Richtung gestreut werden. Dieses Prinzip wird anhand der Lebensdauer der durch Pho- toemission angeregten Zust{\"a}nde untersucht. Hierbei wird gezeigt, dass die Kopplung der Elektronen des Ober {\"a}chenzustands von Bi2Te3 an Phononen unerwartet hoch ist und dass sich eine Anisotropie in der Bandstruktur des Selbigen auch in den Lebensdauern der ange- regten Zust{\"a}nde widerspiegelt. Weiterhin wird gezeigt, dass sich die Ein {\"u}sse von magne- tischen und nicht-magnetischen Verunreinigungen auf die Lebensdauern stark voneinander unterscheiden. Im letzten Teil der vorliegenden Arbeit wird untersucht, ob eine Asymmetrie in der Inten- sit{\"a}tsverteilung der winkelaufgel{\"o}sten Photoemissionsspektren, bei Anregung mit zirku- lar polarisiertem Licht, in Bi2Te3 R{\"u}ckschl{\"u}sse auf die Spinpolarisation der Elektronen erlaubt. Bei Variation der Energie des eingestrahlten Lichts wird ein Vorzeichenwechsel der Asymmetrie beobachtet. Daraus l{\"a}sst sich schlussfolgern, dass die Asymmetrie keine R{\"u}ckschl{\"u}sse auf die Spinpolarisation erlaubt.}, language = {en} } @phdthesis{Schroeder2007, author = {Schr{\"o}der, Birgit Eva}, title = {Spatial and temporal dynamics of the terrestrial carbon cycle : assimilation of two decades of optical satellite data into a process-based global vegetation model}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17596}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {This PhD thesis presents the spatio-temporal distribution of terrestrial carbon fluxes for the time period of 1982 to 2002 simulated by a combination of the process-based dynamic global vegetation model LPJ and a 21-year time series of global AVHRR-fPAR data (fPAR - fraction of photosynthetically active radiation). Assimilation of the satellite data into the model allows improved simulations of carbon fluxes on global as well as on regional scales. As it is based on observed data and includes agricultural regions, the model combined with satellite data produces more realistic carbon fluxes of net primary production (NPP), soil respiration, carbon released by fire and the net land-atmosphere flux than the potential vegetation model. It also produces a good fit to the interannual variability of the CO2 growth rate. Compared to the original model, the model with satellite data constraint produces generally smaller carbon fluxes than the purely climate-based stand-alone simulation of potential natural vegetation, now comparing better to literature estimates. The lower net fluxes are a result of a combination of several effects: reduction in vegetation cover, consideration of human influence and agricultural areas, an improved seasonality, changes in vegetation distribution and species composition. This study presents a way to assess terrestrial carbon fluxes and elucidates the processes contributing to interannual variability of the terrestrial carbon exchange. Process-based terrestrial modelling and satellite-observed vegetation data are successfully combined to improve estimates of vegetation carbon fluxes and stocks. As net ecosystem exchange is the most interesting and most sensitive factor in carbon cycle modelling and highly uncertain, the presented results complementary contribute to the current knowledge, supporting the understanding of the terrestrial carbon budget.}, language = {en} } @phdthesis{Guertler2005, author = {G{\"u}rtler, Christine}, title = {Soziale Ungleichheit unter Kindern : {\"u}ber die Rolle von Kind- und Elternhausmerkmalen f{\"u}r die Akzeptanz und den Einfluss eines Kindes in seiner Schulklasse}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-16797}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {Ziel der Studie war die Untersuchung individueller und familialer Faktoren f{\"u}r den sozialen Status eines Kindes in seiner Schulklasse. Durch die Unterscheidung von Akzeptanz und Einfluss als zweier Hauptdimensionen des sozialen Status konnte die Arbeit aufkl{\"a}ren, welche Rolle verschiedene Attribute f{\"u}r das Erreichen von Akzeptanz oder Einfluss spielen. 234 Dritt- und F{\"u}nftkl{\"a}ssler aus Berliner Grundschulen erhielten soziometrische Maße, durch welche der soziale Status erhoben wurde (Akzeptanz und Einfluss). Individuelle und familiale Faktoren wurden mittels Peernominationen {\"u}ber das Verhalten der Kinder (Fremdurteil), Schulnoten (Lehrerangabe)und Maße des sozio-{\"o}konomischen Status der Eltern (Elternangabe)erhoben. Die Ergebnisse zeigen, dass Akzeptanz positiv mit prosozialem und negativ mit aggressivem Verhalten eines Kindes assoziiert ist. Die Zusammenh{\"a}nge dieser Verhaltensweisen mit Einfluss wiesen in dieselbe Richtung, waren aber deutlich geringer. Ideenreichtum und Humor hingen mit Akzeptanz und Einfluss gleichermaßen positiv zusammen, sowie Traurigsein gleichermaßen negativ mit beiden Statusdimensionen verbunden war. Das Verhalten eines Kindes vermittelte den Zusammenhang zwischen Merkmalen wie Geschlecht, relativem Alter, Schulnoten und der Akzeptanz und dem Einfluss eines Kindes. Zum Beispiel war die positive Beziehung zwischen Schulnoten und dem sozialen Status {\"u}berwiegend auf die mit(guten)Schulnoten assoziierten Verhaltensweisen Prosozialit{\"a}t und (geringe) Aggressivit{\"a}t zur{\"u}ckzuf{\"u}hren. Die gr{\"o}ßere Akzeptanz von M{\"a}dchen ließ sich ebenso durch deren gr{\"o}ßere Prosozialit{\"a}t und geringere Aggressivit{\"a}t erkl{\"a}ren. Jungen waren im Hinblick auf ihren Einfluss sowohl am oberen als auch am unteren Ende der Hierarchie {\"u}berrepr{\"a}sentiert. Sowohl sehr einflussreiche als auch einflusslose Jungen zeichneten sich durch eine erh{\"o}hte Aggressivit{\"a}t aus. Komplexere Analysen wiesen daraufhin, dass Jungen negative Auswirkungen von aggressivem Verhalten durch Humor und Ideenreichtum auf ihren Status kompensieren konnten. Der moderate Zusammenhang zwischen dem elterlichen sozio{\"o}konomischen Status und dem sozialen Status des Kindes wurde vollst{\"a}ndig durch das Verhalten des Kindes mediiert. Das Elternhaus war wichtiger f{\"u}r die Akzeptanz als f{\"u}r den Einfluss eines Kindes. Kinder mit Migrationshintergrund waren sowohl weniger akzeptiert als auch weniger einflussreich in ihrer Klasse. Elterliche Trennung trug nicht zur sozialen Position eines Kindes bei.}, language = {de} } @phdthesis{Friese2016, author = {Friese, Viviane A.}, title = {Solvato-, vapo, mechanochromic and luminescent behavior of Rhodium, Platinum and Gold complexes and their coordination polymers}, school = {Universit{\"a}t Potsdam}, pages = {100 S.}, year = {2016}, language = {en} } @phdthesis{Jentsch2021, author = {Jentsch, Anna}, title = {Soil gas analytics in geothermal exploration and monitoring}, doi = {10.25932/publishup-54403}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-544039}, school = {Universit{\"a}t Potsdam}, pages = {xxxi, 162}, year = {2021}, abstract = {Major challenges during geothermal exploration and exploitation include the structural-geological characterization of the geothermal system and the application of sustainable monitoring concepts to explain changes in a geothermal reservoir during production and/or reinjection of fluids. In the absence of sufficiently permeable reservoir rocks, faults and fracture networks are preferred drilling targets because they can facilitate the migration of hot and/or cold fluids. In volcanic-geothermal systems considerable amounts of gas emissions can be released at the earth surface, often related to these fluid-releasing structures. In this thesis, I developed and evaluated different methodological approaches and measurement concepts to determine the spatial and temporal variation of several soil gas parameters to understand the structural control on fluid flow. In order to validate their potential as innovative geothermal exploration and monitoring tools, these methodological approaches were applied to three different volcanic-geothermal systems. At each site an individual survey design was developed regarding the site-specific questions. The first study presents results of the combined measurement of CO2 flux, ground temperatures, and the analysis of isotope ratios (δ13CCO2, 3He/4He) across the main production area of the Los Humeros geothermal field, to identify locations with a connection to its supercritical (T > 374◦C and P > 221 bar) geothermal reservoir. The results of the systematic and large-scale (25 x 200 m) CO2 flux scouting survey proved to be a fast and flexible way to identify areas of anomalous degassing. Subsequent sampling with high resolution surveys revealed the actual extent and heterogenous pattern of anomalous degassing areas. They have been related to the internal fault hydraulic architecture and allowed to assess favourable structural settings for fluid flow such as fault intersections. Finally, areas of unknown structurally controlled permeability with a connection to the superhot geothermal reservoir have been determined, which represent promising targets for future geothermal exploration and development. In the second study, I introduce a novel monitoring approach by examining the variation of CO2 flux to monitor changes in the reservoir induced by fluid reinjection. For that reason, an automated, multi-chamber CO2 flux system was deployed across the damage zone of a major normal fault crossing the Los Humeros geothermal field. Based on the results of the CO2 flux scouting survey, a suitable site was selected that had a connection to the geothermal reservoir, as identified by hydrothermal CO2 degassing and hot ground temperatures (> 50 °C). The results revealed a response of gas emissions to changes in reinjection rates within 24 h, proving an active hydraulic communication between the geothermal reservoir and the earth surface. This is a promising monitoring strategy that provides nearly real-time and in-situ data about changes in the reservoir and allows to timely react to unwanted changes (e.g., pressure decline, seismicity). The third study presents results from the Aluto geothermal field in Ethiopia where an area-wide and multi-parameter analysis, consisting of measurements of CO2 flux, 222Rn, and 220Rn activity concentrations and ground temperatures was conducted to detect hidden permeable structures. 222Rn and 220Rn activity concentrations are evaluated as a complementary soil gas parameter to CO2 flux, to investigate their potential to understand tectono-volcanic degassing. The combined measurement of all parameters enabled to develop soil gas fingerprints, a novel visualization approach. Depending on the magnitude of gas emissions and their migration velocities the study area was divided in volcanic (heat), tectonic (structures), and volcano-tectonic dominated areas. Based on these concepts, volcano-tectonic dominated areas, where hot hydrothermal fluids migrate along permeable faults, present the most promising targets for future geothermal exploration and development in this geothermal field. Two of these areas have been identified in the south and south-east which have not yet been targeted for geothermal exploitation. Furthermore, two unknown areas of structural related permeability could be identified by 222Rn and 220Rn activity concentrations. Eventually, the fourth study presents a novel measurement approach to detect structural controlled CO2 degassing, in Ngapouri geothermal area, New Zealand. For the first time, the tunable diode laser (TDL) method was applied in a low-degassing geothermal area, to evaluate its potential as a geothermal exploration method. Although the sampling approach is based on profile measurements, which leads to low spatial resolution, the results showed a link between known/inferred faults and increased CO2 concentrations. Thus, the TDL method proved to be a successful in the determination of structural related permeability, also in areas where no obvious geothermal activity is present. Once an area of anomalous CO2 concentrations has been identified, it can be easily complemented by CO2 flux grid measurements to determine the extent and orientation of the degassing segment. With the results of this work, I was able to demonstrate the applicability of systematic and area-wide soil gas measurements for geothermal exploration and monitoring purposes. In particular, the combination of different soil gases using different measurement networks enables the identification and characterization of fluid-bearing structures and has not yet been used and/or tested as standard practice. The different studies present efficient and cost-effective workflows and demonstrate a hands-on approach to a successful and sustainable exploration and monitoring of geothermal resources. This minimizes the resource risk during geothermal project development. Finally, to advance the understanding of the complex structure and dynamics of geothermal systems, a combination of comprehensive and cutting-edge geological, geochemical, and geophysical exploration methods is essential.}, language = {en} } @phdthesis{Ehlert2023, author = {Ehlert, Kristian}, title = {Simulations of active galactic nuclei feedback with cosmic rays and magnetic fields}, doi = {10.25932/publishup-57816}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-578168}, school = {Universit{\"a}t Potsdam}, pages = {155}, year = {2023}, abstract = {The central gas in half of all galaxy clusters shows short cooling times. Assuming unimpeded cooling, this should lead to high star formation and mass cooling rates, which are not observed. Instead, it is believed that condensing gas is accreted by the central black hole that powers an active galactic nuclei jet, which heats the cluster. The detailed heating mechanism remains uncertain. A promising mechanism invokes cosmic ray protons that scatter on self-generated magnetic fluctuations, i.e. Alfv{\´e}n waves. Continuous damping of Alfv{\´e}n waves provides heat to the intracluster medium. Previous work has found steady state solutions for a large sample of clusters where cooling is balanced by Alfv{\´e}nic wave heating. To verify modeling assumptions, we set out to study cosmic ray injection in three-dimensional magnetohydrodynamical simulations of jet feedback in an idealized cluster with the moving-mesh code arepo. We analyze the interaction of jet-inflated bubbles with the turbulent magnetized intracluster medium. Furthermore, jet dynamics and heating are closely linked to the largely unconstrained jet composition. Interactions of electrons with photons of the cosmic microwave background result in observational signatures that depend on the bubble content. Those recent observations provided evidence for underdense bubbles with a relativistic filling while adopting simplifying modeling assumptions for the bubbles. By reproducing the observations with our simulations, we confirm the validity of their modeling assumptions and as such, confirm the important finding of low-(momentum) density jets. In addition, the velocity and magnetic field structure of the intracluster medium have profound consequences for bubble evolution and heating processes. As velocity and magnetic fields are physically coupled, we demonstrate that numerical simulations can help link and thereby constrain their respective observables. Finally, we implement the currently preferred accretion model, cold accretion, into the moving-mesh code arepo and study feedback by light jets in a radiatively cooling magnetized cluster. While self-regulation is attained independently of accretion model, jet density and feedback efficiencies, we find that in order to reproduce observed cold gas morphology light jets are preferred.}, language = {en} } @phdthesis{Werhahn2023, author = {Werhahn, Maria}, title = {Simulating galaxy evolution with cosmic rays: the multi-frequency view}, doi = {10.25932/publishup-57285}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-572851}, school = {Universit{\"a}t Potsdam}, pages = {5, 220}, year = {2023}, abstract = {Cosmic rays (CRs) constitute an important component of the interstellar medium (ISM) of galaxies and are thought to play an essential role in governing their evolution. In particular, they are able to impact the dynamics of a galaxy by driving galactic outflows or heating the ISM and thereby affecting the efficiency of star-formation. Hence, in order to understand galaxy formation and evolution, we need to accurately model this non-thermal constituent of the ISM. But except in our local environment within the Milky Way, we do not have the ability to measure CRs directly in other galaxies. However, there are many ways to indirectly observe CRs via the radiation they emit due to their interaction with magnetic and interstellar radiation fields as well as with the ISM. In this work, I develop a numerical framework to calculate the spectral distribution of CRs in simulations of isolated galaxies where a steady-state between injection and cooling is assumed. Furthermore, I calculate the non-thermal emission processes arising from the modelled CR proton and electron spectra ranging from radio wavelengths up to the very high-energy gamma-ray regime. I apply this code to a number of high-resolution magneto-hydrodynamical (MHD) simulations of isolated galaxies, where CRs are included. This allows me to study their CR spectra and compare them to observations of the CR proton and electron spectra by the Voyager-1 satellite and the AMS-02 instrument in order to reveal the origin of the measured spectral features. Furthermore, I provide detailed emission maps, luminosities and spectra of the non-thermal emission from our simulated galaxies that range from dwarfs to Milk-Way analogues to starburst galaxies at different evolutionary stages. I successfully reproduce the observed relations between the radio and gamma-ray luminosities with the far-infrared (FIR) emission of star-forming (SF) galaxies, respectively, where the latter is a good tracer of the star-formation rate. I find that highly SF galaxies are close to the limit where their CR population would lose all of their energy due to the emission of radiation, whereas CRs tend to escape low SF galaxies more quickly. On top of that, I investigate the properties of CR transport that are needed in order to match the observed gamma-ray spectra. Furthermore, I uncover the underlying processes that enable the FIR-radio correlation (FRC) to be maintained even in starburst galaxies and find that thermal free-free-emission naturally explains the observed radio spectra in SF galaxies like M82 and NGC 253 thus solving the riddle of flat radio spectra that have been proposed to contradict the observed tight FRC. Lastly, I scrutinise the steady-state modelling of the CR proton component by investigating for the first time the influence of spectrally resolved CR transport in MHD simulations on the hadronic gamma-ray emission of SF galaxies revealing new insights into the observational signatures of CR transport both spectrally and spatially.}, language = {en} } @phdthesis{Sieg2018, author = {Sieg, Tobias}, title = {Reliability of flood damage estimations across spatial scales}, doi = {10.25932/publishup-42616}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426161}, school = {Universit{\"a}t Potsdam}, pages = {XIII, 115}, year = {2018}, abstract = {Extreme Naturereignisse sind ein integraler Bestandteil der Natur der Erde. Sie werden erst dann zu Gefahren f{\"u}r die Gesellschaft, wenn sie diesen Ereignissen ausgesetzt ist. Dann allerdings k{\"o}nnen Naturgefahren verheerende Folgen f{\"u}r die Gesellschaft haben. Besonders hydro-meteorologische Gefahren wie zum Beispiel Flusshochwasser, Starkregenereignisse, Winterst{\"u}rme, Orkane oder Tornados haben ein hohes Schadenspotential und treten rund um den Globus auf. Einhergehend mit einer immer w{\"a}rmer werdenden Welt, werden auch Extremwetterereignisse, welche potentiell Naturgefahren ausl{\"o}sen k{\"o}nnen, immer wahrscheinlicher. Allerdings tr{\"a}gt nicht nur eine sich ver{\"a}ndernde Umwelt zur Erh{\"o}hung des Risikos von Naturgefahren bei, sondern auch eine sich ver{\"a}ndernde Gesellschaft. Daher ist ein angemessenes Risikomanagement erforderlich um die Gesellschaft auf jeder r{\"a}umlichen Ebene an diese Ver{\"a}nderungen anzupassen. Ein essentieller Bestandteil dieses Managements ist die Absch{\"a}tzung der {\"o}konomischen Auswirkungen der Naturgefahren. Bisher allerdings fehlen verl{\"a}ssliche Methoden um die Auswirkungen von hydro-meteorologischen Gefahren abzusch{\"a}tzen. Ein Hauptbestandteil dieser Arbeit ist daher die Entwicklung und Anwendung einer neuen Methode, welche die Verl{\"a}sslichkeit der Schadenssch{\"a}tzung verbessert. Die Methode wurde beispielhaft zur Sch{\"a}tzung der {\"o}konomischen Auswirkungen eines Flusshochwassers auf einzelne Unternehmen bis hin zu den Auswirkungen auf das gesamte Wirtschaftssystem Deutschlands erfolgreich angewendet. Bestehende Methoden geben meist wenig Information {\"u}ber die Verl{\"a}sslichkeit ihrer Sch{\"a}tzungen. Da diese Informationen Entscheidungen zur Anpassung an das Risiko erleichtern, wird die Verl{\"a}sslichkeit der Schadenssch{\"a}tzungen mit der neuen Methode dargestellt. Die Verl{\"a}sslichkeit bezieht sich dabei nicht nur auf die Schadenssch{\"a}tzung selber, sondern auch auf die Annahmen, die {\"u}ber betroffene Geb{\"a}ude gemacht werden. Nach diesem Prinzip kann auch die Verl{\"a}sslichkeit von Annahmen {\"u}ber die Zukunft dargestellt werden, dies ist ein wesentlicher Aspekt f{\"u}r Prognosen. Die Darstellung der Verl{\"a}sslichkeit und die erfolgreiche Anwendung zeigt das Potential der Methode zur Verwendung von Analysen f{\"u}r gegenw{\"a}rtige und zuk{\"u}nftige hydro-meteorologische Gefahren.}, language = {en} } @phdthesis{Mubeen2018, author = {Mubeen, Umarah}, title = {Regulation of central carbon and nitrogen metabolism by Target of Rapamycin (TOR) kinase in Chlamydomonas reinhardtii}, school = {Universit{\"a}t Potsdam}, pages = {vii, 153}, year = {2018}, abstract = {The highly conserved protein complex containing the Target of Rapamycin (TOR) kinase is known to integrate intra- and extra-cellular stimuli controlling nutrient allocation and cellular growth. This thesis describes three studies aimed to understand how TOR signaling pathway influences carbon and nitrogen metabolism in Chlamydomonas reinhardtii. The first study presents a time-resolved analysis of the molecular and physiological features across the diurnal cycle. The inhibition of TOR leads to 50\% reduction in growth followed by nonlinear delays in the cell cycle progression. The metabolomics analysis showed that the growth repression is mainly driven by differential carbon partitioning between anabolic and catabolic processes. Furthermore, the high accumulation of nitrogen-containing compounds indicated that TOR kinase controls the carbon to nitrogen balance of the cell, which is responsible for biomass accumulation, growth and cell cycle progression. In the second study the cause of the high accumulation of amino acids is explained. For this purpose, the effect of TOR inhibition on Chlamydomonas was examined under different growth regimes using stable 13C- and 15N-isotope labeling. The data clearly showed that an increased nitrogen uptake is induced within minutes after the inhibition of TOR. Interestingly, this increased N-influx is accompanied by increased activities of nitrogen assimilating enzymes. Accordingly, it was concluded that TOR inhibition induces de-novo amino acid synthesis in Chlamydomonas. The recognition of this novel process opened an array of questions regarding potential links between central metabolism and TOR signaling. Therefore a detailed phosphoproteomics study was conducted to identify the potential substrates of TOR pathway regulating central metabolism. Interestingly, some of the key enzymes involved in carbon metabolism as well as amino acid synthesis exhibited significant changes in the phosphosite intensities immediately after TOR inhibition. Altogether, these studies provide a) detailed insights to metabolic response of Chlamydomonas to TOR inhibition, b) identification of a novel process causing rapid upshifts in amino acid levels upon TOR inhibition and c) finally highlight potential targets of TOR signaling regulating changes in central metabolism. Further biochemical and molecular investigations could confirm these observations and advance the understanding of growth signaling in microalgae.}, language = {en} } @phdthesis{Demircioglu2007, author = {Demircioglu, Aydin}, title = {Reconstruction of deligne classes and cocycles}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13755}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {In der vorliegenden Arbeit verallgemeinern wir im Wesentlichen zwei Theoreme von Mackaay-Picken und Picken (2002, 2004). Im ihrem Artikel zeigen Mackaay und Picken,dass es eine bijektive Korrespodenz zwischen Deligne 2-Klassen \$\xi \in \check{H}^2(M, \mathcal{D}^2)\$ und Holonomie Abbildungen von der zweiten d{\"u}nnen Homotopiegruppe \$\pi_2^2(M)\$ in die abelsche Gruppe \$U(1)\$ gibt. Im zweiten Artikel wird eine Verallgemeinerung dieses Theorems bewiesen: Picken zeigt, dass es eine Bijektion gibt zwischen Deligne 2-Kozykeln und gewissen 2-dimensionalen topologischen Quantenfeldtheorien. In dieser Arbeit zeigen wir, dass diese beiden Theoreme in allen Dimensionen gelten.Wir betrachten zun{\"a}chst den Holonomie Fall und k{\"o}nnen mittels simplizialen Methoden nachweisen, dass die Gruppe der glatten Deligne \$d\$-Klassen isomorph ist zu der Gruppe der glatten Holonomie Abbildungen von der \$d\$-ten d{\"u}nnen Homotopiegruppe \$\pi_d^d(M)\$ nach \$U(1)\$, sofern \$M\$ eine \$(d-1)\$-zusammenh{\"a}ngende Mannigfaltigkeit ist. Wir vergleichen dieses Resultat mit einem Satz von Gajer (1999). Gajer zeigte, dass jede Deligne \$d\$-Klasse durch eine andere Klasse von Holonomie-Abbildungen rekonstruiert werden kann, die aber nicht nur Holonomien entlang von Sph{\"a}ren, sondern auch entlang von allgemeinen \$d\$-Mannigfaltigkeiten in \$M\$ enth{\"a}lt. Dieser Zugang ben{\"o}tigt dann aber nicht, dass \$M\$ hoch-zusammenh{\"a}ngend ist. Wir zeigen, dass im Falle von flachen Deligne \$d\$-Klassen unser Rekonstruktionstheorem sich von Gajers unterscheidet, sofern \$M\$ nicht als \$(d-1)\$, sondern nur als \$(d-2)\$-zusammenh{\"a}ngend angenommen wird. Stiefel Mannigfaltigkeiten besitzen genau diese Eigenschaft, und wendet man unser Theorem auf diese an und vergleicht das Resultat mit dem von Gajer, so zeigt sich, dass es zuviele Deligne Klassen rekonstruiert. Dies bedeutet, dass unser Rekonstruktionsthreorem ohne die Zusatzbedingungen an die Mannigfaltigkeit M nicht auskommt, d.h. unsere Rekonstruktion ben{\"o}tigt zwar weniger Informationen {\"u}ber die Holonomie entlang von d-dimensionalen Mannigfaltigkeiten, aber daf{\"u}r muss M auch \$(d-1)\$-zusammenh{\"a}ngend angenommen werden. Wir zeigen dann, dass auch das zweite Theorem verallgemeinert werden kann: Indem wir das Konzept einer Picken topologischen Quantenfeldtheorie in beliebigen Dimensionen einf{\"u}hren, k{\"o}nnen wir nachweisen, dass jeder Deligne \$d\$-Kozykel eine solche \$d\$-dimensionale Feldtheorie mit zwei besonderen Eigenschaften, der d{\"u}nnen Invarianz und der Glattheit, induziert. Wir beweisen, dass jede \$d\$-dimensionale topologische Quantenfeldtheorie nach Picken mit diesen zwei Eigenschaften auch eine Deligne \$d\$-Klasse definiert und pr{\"u}fen nach, dass diese Konstruktion sowohl surjektiv als auch injektiv ist. Demzufolge sind beide Gruppen isomorph.}, language = {en} } @phdthesis{Wischnewski2011, author = {Wischnewski, Juliane}, title = {Reconstructing climate variability on the Tibetan Plateau : comparing aquatic and terrestrial signals}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52453}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Spatial and temporal temperature and moisture patterns across the Tibetan Plateau are very complex. The onset and magnitude of the Holocene climate optimum in the Asian monsoon realm, in particular, is a subject of considerable debate as this time period is often used as an analogue for recent global warming. In the light of contradictory inferences regarding past climate and environmental change on the Tibetan Plateau, I have attempted to explain mismatches in the timing and magnitude of change. Therefore, I analysed the temporal variation of fossil pollen and diatom spectra and the geochemical record from palaeo-ecological records covering different time scales (late Quaternary and the last 200 years) from two core regions in the NE and SE Tibetan Plateau. For interpretation purposes I combined my data with other available palaeo-ecological data to set up corresponding aquatic and terrestrial proxy data sets of two lake pairs and two sets of sites. I focused on the direct comparison of proxies representing lacustrine response to climate signals (e.g., diatoms, ostracods, geochemical record) and proxies representing changes in the terrestrial environment (i.e., terrestrial pollen), in order to asses whether the lake and its catchments respond at similar times and magnitudes to environmental changes. Therefore, I introduced the established numerical technique procrustes rotation as a new approach in palaeoecology to quantitatively compare raw data of any two sedimentary records of interest in order to assess their degree of concordance. Focusing on the late Quaternary, sediment cores from two lakes (Kuhai Lake 35.3°N; 99.2°E; 4150 m asl; and Koucha Lake 34.0°N; 97.2°E; 4540 m asl) on the semi-arid northeastern Tibetan Plateau were analysed to identify post-glacial vegetation and environmental changes, and to investigate the responses of lake ecosystems to such changes. Based on the pollen record, five major vegetation and climate changes could be identified: (1) A shift from alpine desert to alpine steppe indicates a change from cold, dry conditions to warmer and more moist conditions at 14.8 cal. ka BP, (2) alpine steppe with tundra elements points to conditions of higher effective moisture and a stepwise warming climate at 13.6 cal. ka BP, (3) the appearance of high-alpine meadow vegetation indicates a further change towards increased moisture, but with colder temperatures, at 7.0 cal. ka BP, (4) the reoccurrence of alpine steppe with desert elements suggests a return to a significantly colder and drier phase at 6.3 cal. ka BP, and (5) the establishment of alpine steppe-meadow vegetation indicates a change back to relatively moist conditions at 2.2 cal. ka BP. To place the reconstructed climate inferences from the NE Tibetan Plateau into the context of Holocene moisture evolution across the Tibetan Plateau, I applied a five-scale moisture index and average link clustering to all available continuous pollen and non-pollen palaeoclimate records from the Tibetan Plateau, in an attempt to detect coherent regional and temporal patterns of moisture evolution on the Plateau. However, no common temporal or spatial pattern of moisture evolution during the Holocene could be detected, which can be assigned to the complex responses of different proxies to environmental changes in an already very heterogeneous mountain landscape, where minor differences in elevation can result in marked variations in microenvironments. Focusing on the past 200 years, I analysed the sedimentary records (LC6 Lake 29.5°N, 94.3°E, 4132 m asl; and Wuxu Lake 29.9°N, 101.1°E, 3705 m asl) from the southeastern Tibetan Plateau. I found that despite presumed significant temperature increases over that period, pollen and diatom records from the SE Tibetan Plateau reveal only very subtle changes throughout their profiles. The compositional species turnover investigated over the last 200 years appears relatively low in comparison to the species reorganisations during the Holocene. The results indicate that climatically induced ecological thresholds are not yet crossed, but that human activity has an increasing influence, particularly on the terrestrial ecosystem. Forest clearances and reforestation have not caused forest decline in our study area, but a conversion of natural forests to semi-natural secondary forests. The results from the numerical proxy comparison of the two sets of two pairs of Tibetan lakes indicate that the use of different proxies and the work with palaeo-ecological records from different lake types can cause deviant stories of inferred change. Irrespective of the timescale (Holocene or last 200 years) or region (SE or NE Tibetan Plateau) analysed, the agreement in terms of the direction, timing, and magnitude of change between the corresponding terrestrial data sets is generally better than the match between the corresponding lacustrine data sets, suggesting that lacustrine proxies may partly be influenced by in-lake or local catchment processes whereas the terrestrial proxy reflects a more regional climatic signal. The current disaccord on coherent temporal and spatial climate patterns on the Tibetan Plateau can partly be ascribed to the complexity of proxy response and lake systems on the Tibetan Plateau. Therefore, a multi-proxy, multi-site approach is important in order to gain a reliable climate interpretation for the complex mountain landscape of the Tibetan Plateau.}, language = {en} } @phdthesis{Videla2014, author = {Videla, Santiago}, title = {Reasoning on the response of logical signaling networks with answer set programming}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71890}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {Deciphering the functioning of biological networks is one of the central tasks in systems biology. In particular, signal transduction networks are crucial for the understanding of the cellular response to external and internal perturbations. Importantly, in order to cope with the complexity of these networks, mathematical and computational modeling is required. We propose a computational modeling framework in order to achieve more robust discoveries in the context of logical signaling networks. More precisely, we focus on modeling the response of logical signaling networks by means of automated reasoning using Answer Set Programming (ASP). ASP provides a declarative language for modeling various knowledge representation and reasoning problems. Moreover, available ASP solvers provide several reasoning modes for assessing the multitude of answer sets. Therefore, leveraging its rich modeling language and its highly efficient solving capacities, we use ASP to address three challenging problems in the context of logical signaling networks: learning of (Boolean) logical networks, experimental design, and identification of intervention strategies. Overall, the contribution of this thesis is three-fold. Firstly, we introduce a mathematical framework for characterizing and reasoning on the response of logical signaling networks. Secondly, we contribute to a growing list of successful applications of ASP in systems biology. Thirdly, we present a software providing a complete pipeline for automated reasoning on the response of logical signaling networks.}, language = {en} } @phdthesis{MichalikOnichimowska2022, author = {Michalik-Onichimowska, Aleksandra}, title = {Real-time monitoring of (photo)chemical reactions in micro flow reactors and levitated droplets by IR-MALDI ion mobility and mass spectrometry}, doi = {10.25932/publishup-55729}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-557298}, school = {Universit{\"a}t Potsdam}, pages = {v, 68}, year = {2022}, abstract = {Eine nachhaltigere chemische Industrie erfordert eine Minimierung der L{\"o}sungsmittel und Chemikalien. Daher werden Optimierung und Entwicklung chemischer Prozesse vor einer Produktion in großem Maßstab in kleinen Chargen durchgef{\"u}hrt. Der entscheidende Schritt bei diesem Ansatz ist die Skalierbarkeit von kleinen Reaktionssystemen auf große, kosteneffiziente Reaktoren. Die Vergr{\"o}ßerung des Volumens des Reaktionsmediums geht immer mit der Vergr{\"o}ßerung der Oberfl{\"a}che einher, die mit dem begrenzenden Gef{\"a}ß in Kontakt steht. Da das Volumen kubisch, w{\"a}hrend die Oberfl{\"a}che quadratisch mit zunehmendem Radius skaliert, nimmt ihr Verh{\"a}ltnis nicht linear zu. Viele an der Grenzfl{\"a}che zwischen Oberfl{\"a}che und Fl{\"u}ssigkeit auftretende Ph{\"a}nomene k{\"o}nnen die Reaktionsgeschwindigkeiten und Ausbeuten beeinflussen, was zu falschen Prognosen aufgrund der kleinskaligen Optimierung f{\"u}hrt. Die Anwendung von schwebenden Tropfen als beh{\"a}lterlose Reaktionsgef{\"a}ße bietet eine vielversprechende M{\"o}glichkeit, die oben genannten Probleme zu vermeiden. In der vorgestellten Arbeit wurde eine effiziente Kopplung von akustisch schwebenden Tropfen und IM Spektrometer f{\"u}r die Echtzeit{\"u}berwachung chemischer Reaktionen entwickelt, bei denen akustisch schwebende Tropfen als Reaktionsgef{\"a}ße fungieren. Das Design des Systems umfasst die ber{\"u}hrungslose Probenahme und Ionisierung, die durch Laserdesorption und -ionisation bei 2,94 µm realisiert wird. Der Umfang der Arbeit umfasst grundlegende Studien zum Verst{\"a}ndnis der Laserbestrahlung von Tropfen im akustischen Feld. Das Verst{\"a}ndnis dieses Ph{\"a}nomens ist entscheidend, um den Effekt der zeitlichen und r{\"a}umlichen Aufl{\"o}sung der erzeugten Ionenwolke zu verstehen, die die Aufl{\"o}sung des Systems beeinflusst. Der Aufbau umfasst eine akustische Falle, Laserbestrahlung und elektrostatische Linsen, die bei hoher Spannung unter Umgebungsdruck arbeiten. Ein effektiver Ionentransfer im Grenzfl{\"a}chenbereich zwischen dem schwebenden Tropfen und dem IMS muss daher elektrostatische und akustische Felder vollst{\"a}ndig ber{\"u}cksichtigen. F{\"u}r die Probenahme und Ionisation wurden zwei unterschiedliche Laserpulsl{\"a}ngen untersucht, n{\"a}mlich im ns- und µs-Bereich. Die Bestrahlung {\"u}ber µs-Laserpulse bietet gegen{\"u}ber ns-Pulse mehrere Vorteile: i) das Tropfenvolumen wird nicht stark beeinflusst, was es erm{\"o}glichet, nur ein kleines Volumen des Tropfens abzutasten; ii) die geringere Fluenz f{\"u}hrt zu weniger ausgepr{\"a}gten Schwingungen des im akustischen Feld eingeschlossenen Tropfens und der Tropfen wird nicht aus dem akustischen Feld r{\"u}ckgeschlagen, was zum Verlust der Probe f{\"u}hren w{\"u}rde; iii) die milde Laserbestrahlung f{\"u}hrt zu einer besseren r{\"a}umlichen und zeitlichen Begrenzung der Ionenwolken, was zu einer besseren Aufl{\"o}sung der detektierten Ionenpakete f{\"u}hrt. Schließlich erm{\"o}glicht dieses Wissen die Anwendung der Ionenoptik, die erforderlich ist, um den Ionenfluss zwischen dem im akustischen Feld suspendierten Tropfen und dem IM Spektrometer zu induzieren. Die Ionenoptik aus 2 elektrostatischen Linsen in der N{\"a}he des Tropfens erm{\"o}glicht es, die Ionenwolke effektiv zu fokussieren und direkt zum IM Spektrometer-Eingang zu f{\"u}hren. Diese neuartige Kopplung hat sich beim Nachweis einiger basischer Molek{\"u}le als erfolgreich erwiesen. Um die Anwendbarkeit des Systems zu belegen, wurde die Reaktion zwischen N-Boc Cysteine Methylester und Allylalkohol in einem Chargenreaktor durchgef{\"u}hrt und online {\"u}berwacht. F{\"u}r eine Kalibrierung wurde der Reaktionsfortschritt parallel mittels 1H-NMR verfolgt. Der beobachtete Reaktionsumsatz von mehr als 50\% innerhalb der ersten 20 Minuten demonstrierte die Eignung der Reaktion, um die Einsatzpotentiale des entwickelten Systems zu bewerten.}, language = {en} } @phdthesis{Schneider2023, author = {Schneider, Helen}, title = {Reactive eutectic media based on ammonium formate for the valorization of bio-sourced materials}, doi = {10.25932/publishup-61302}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-613024}, school = {Universit{\"a}t Potsdam}, pages = {137}, year = {2023}, abstract = {In the last several decades eutectic mixtures of different compositions were successfully used as solvents for vast amount of chemical processes, and only relatively recently they were discovered to be widely spread in nature. As such they are discussed as a third liquid media of the living cell, that is composed of common cell metabolites. Such media may also incorporate water as a eutectic component in order to regulate properties such as enzyme activity or viscosity. Taking inspiration form such sophisticated use of eutectic mixtures, this thesis will explore the use of reactive eutectic media (REM) for organic synthesis. Such unconventional media are characterized by the reactivity of their components, which means that mixture may assume the role of the solvent as well as the reactant itself. The thesis focuses on novel REM based on ammonium formate and investigates their potential for the valorization of bio-sourced materials. The use of REM allows the performance of a number of solvent-free reactions, which entails the benefits of a superior atom and energy economy, higher yields and faster rates compared to reactions in solution. This is evident for the Maillard reaction between ammonium formate and various monosaccharides for the synthesis of substituted pyrazines as well as for a Leuckart type reaction between ammonium formate and levulinic acid for the synthesis of 5-methyl-2-pyrrolidone. Furthermore, reaction of ammonium formate with citric acid for the synthesis of yet undiscovered fluorophores, shows that synthesis in REM can open up unexpected reaction pathways. Another focus of the thesis is the study of water as a third component in the REM. As a result, the concept of two different dilution regimes (tertiary REM and in REM in solvent) appears useful for understanding the influence of water. It is shown that small amounts of water can be of great benefit for the reaction, by reducing viscosity and at the same time increasing reaction yields. REM based on ammonium formate and organic acids are employed for lignocellulosic biomass treatment. The thesis thereby introduces an alternative approach towards lignocellulosic biomass fractionation that promises a considerable process intensification by the simultaneous generation of cellulose and lignin as well as the production of value-added chemicals from REM components. The thesis investigates the generated cellulose and the pathway to nanocellulose generation and also includes the structural analysis of extracted lignin. Finally, the thesis investigates the potential of microwave heating to run chemical reactions in REM and describes the synergy between these two approaches. Microwave heating for chemical reactions and the use of eutectic mixtures as alternative reaction media are two research fields that are often described in the scope of green chemistry. The thesis will therefore also contain a closer inspection of this terminology and its greater goal of sustainability.}, language = {en} } @phdthesis{Fischer2022, author = {Fischer, Jens Walter}, title = {Random dynamics in collective behavior - consensus, clustering \& extinction of populations}, doi = {10.25932/publishup-55372}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-553725}, school = {Universit{\"a}t Potsdam}, pages = {242}, year = {2022}, abstract = {The echo chamber model describes the development of groups in heterogeneous social networks. By heterogeneous social network we mean a set of individuals, each of whom represents exactly one opinion. The existing relationships between individuals can then be represented by a graph. The echo chamber model is a time-discrete model which, like a board game, is played in rounds. In each round, an existing relationship is randomly and uniformly selected from the network and the two connected individuals interact. If the opinions of the individuals involved are sufficiently similar, they continue to move closer together in their opinions, whereas in the case of opinions that are too far apart, they break off their relationship and one of the individuals seeks a new relationship. In this paper we examine the building blocks of this model. We start from the observation that changes in the structure of relationships in the network can be described by a system of interacting particles in a more abstract space. These reflections lead to the definition of a new abstract graph that encompasses all possible relational configurations of the social network. This provides us with the geometric understanding necessary to analyse the dynamic components of the echo chamber model in Part III. As a first step, in Part 7, we leave aside the opinions of the inidividuals and assume that the position of the edges changes with each move as described above, in order to obtain a basic understanding of the underlying dynamics. Using Markov chain theory, we find upper bounds on the speed of convergence of an associated Markov chain to its unique stationary distribution and show that there are mutually identifiable networks that are not apparent in the dynamics under analysis, in the sense that the stationary distribution of the associated Markov chain gives equal weight to these networks. In the reversible cases, we focus in particular on the explicit form of the stationary distribution as well as on the lower bounds of the Cheeger constant to describe the convergence speed. The final result of Section 8, based on absorbing Markov chains, shows that in a reduced version of the echo chamber model, a hierarchical structure of the number of conflicting relations can be identified. We can use this structure to determine an upper bound on the expected absorption time, using a quasi-stationary distribution. This hierarchy of structure also provides a bridge to classical theories of pure death processes. We conclude by showing how future research can exploit this link and by discussing the importance of the results as building blocks for a full theoretical understanding of the echo chamber model. Finally, Part IV presents a published paper on the birth-death process with partial catastrophe. The paper is based on the explicit calculation of the first moment of a catastrophe. This first part is entirely based on an analytical approach to second degree recurrences with linear coefficients. The convergence to 0 of the resulting sequence as well as the speed of convergence are proved. On the other hand, the determination of the upper bounds of the expected value of the population size as well as its variance and the difference between the determined upper bound and the actual value of the expected value. For these results we use almost exclusively the theory of ordinary nonlinear differential equations.}, language = {en} } @phdthesis{Schauer2006, author = {Schauer, Nicolas}, title = {Quantitative trait loci (QTL) for metabolite accumulation and metabolic regulation : metabolite profiling of interspecific crosses of tomato}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7643}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {The advent of large-scale and high-throughput technologies has recently caused a shift in focus in contemporary biology from decades of reductionism towards a more systemic view. Alongside the availability of genome sequences the exploration of organisms utilizing such approach should give rise to a more comprehensive understanding of complex systems. Domestication and intensive breeding of crop plants has led to a parallel narrowing of their genetic basis. The potential to improve crops by conventional breeding using elite cultivars is therefore rather limited and molecular technologies, such as marker assisted selection (MAS) are currently being exploited to re-introduce allelic variance from wild species. Molecular breeding strategies have mostly focused on the introduction of yield or resistance related traits to date. However given that medical research has highlighted the importance of crop compositional quality in the human diet this research field is rapidly becoming more important. Chemical composition of biological tissues can be efficiently assessed by metabolite profiling techniques, which allow the multivariate detection of metabolites of a given biological sample. Here, a GC/MS metabolite profiling approach has been applied to investigate natural variation of tomatoes with respect to the chemical composition of their fruits. The establishment of a mass spectral and retention index (MSRI) library was a prerequisite for this work in order to establish a framework for the identification of metabolites from a complex mixture. As mass spectral and retention index information is highly important for the metabolomics community this library was made publicly available. Metabolite profiling of tomato wild species revealed large differences in the chemical composition, especially of amino and organic acids, as well as on the sugar composition and secondary metabolites. Intriguingly, the analysis of a set of S. pennellii introgression lines (IL) identified 889 quantitative trait loci of compositional quality and 326 yield-associated traits. These traits are characterized by increases/decreases not only of single metabolites but also of entire metabolic pathways, thus highlighting the potential of this approach in uncovering novel aspects of metabolic regulation. Finally the biosynthetic pathway of the phenylalanine-derived fruit volatiles phenylethanol and phenylacetaldehyde was elucidated via a combination of metabolic profiling of natural variation, stable isotope tracer experiments and reverse genetic experimentation.}, subject = {Tomate}, language = {en} } @phdthesis{HerreroAlonso2023, author = {Herrero Alonso, Yohana}, title = {Properties of high-redshift galaxies in different environments}, doi = {10.25932/publishup-61328}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-613288}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 114}, year = {2023}, abstract = {The Lyman-𝛼 (Ly𝛼) line commonly assists in the detection of high-redshift galaxies, the so-called Lyman-alpha emitters (LAEs). LAEs are useful tools to study the baryonic matter distribution of the high-redshift universe. Exploring their spatial distribution not only reveals the large-scale structure of the universe at early epochs, but it also provides an insight into the early formation and evolution of the galaxies we observe today. Because dark matter halos (DMHs) serve as sites of galaxy formation, the LAE distribution also traces that of the underlying dark matter. However, the details of this relation and their co-evolution over time remain unclear. Moreover, theoretical studies predict that the spatial distribution of LAEs also impacts their own circumgalactic medium (CGM) by influencing their extended Ly𝛼 gaseous halos (LAHs), whose origin is still under investigation. In this thesis, I make several contributions to improve the knowledge on these fields using samples of LAEs observed with the Multi Unit Spectroscopic Explorer (MUSE) at redshifts of 3 < 𝑧 < 6.}, language = {en} } @phdthesis{Latnikova2012, author = {Latnikova, Alexandra}, title = {Polymeric capsules for self-healing anticorrosion coatings}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60432}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {The present work is devoted to establishing of a new generation of self-healing anti-corrosion coatings for protection of metals. The concept of self-healing anticorrosion coatings is based on the combination of the passive part, represented by the matrix of conventional coating, and the active part, represented by micron-sized capsules loaded with corrosion inhibitor. Polymers were chosen as the class of compounds most suitable for the capsule preparation. The morphology of capsules made of crosslinked polymers, however, was found to be dependent on the nature of the encapsulated liquid. Therefore, a systematic analysis of the morphology of capsules consisting of a crosslinked polymer and a solvent was performed. Three classes of polymers such as polyurethane, polyurea and polyamide were chosen. Capsules made of these polymers and eight solvents of different polarity were synthesized via interfacial polymerization. It was shown that the morphology of the resulting capsules is specific for every polymer-solvent pair. Formation of capsules with three general types of morphology, such as core-shell, compact and multicompartment, was demonstrated by means of Scanning Electron Microscopy. Compact morphology was assumed to be a result of the specific polymer-solvent interactions and be analogues to the process of swelling. In order to verify the hypothesis, pure polyurethane, polyurea and polyamide were synthesized; their swelling behavior in the solvents used as the encapsulated material was investigated. It was shown that the swelling behavior of the polymers in most cases correlates with the capsules morphology. Different morphologies (compact, core-shell and multicompartment) were therefore attributed to the specific polymer-solvent interactions and discussed in terms of "good" and "poor" solvent. Capsules with core-shell morphology are formed when the encapsulated liquid is a "poor" solvent for the chosen polymer while compact morphologies are formed when the solvent is "good". Multicompartment morphology is explained by the formation of infinite networks or gelation of crosslinked polymers. If gelation occurs after the phase separation in the system is achieved, core-shell morphology is present. If gelation of the polymer occurs far before crosslinking is accomplished, further condensation of the polymer due to the crosslinking may lead to the formation of porous or multicompartment morphologies. It was concluded that in general, the morphology of capsules consisting of certain polymer-solvent pairs can be predicted on the basis of polymer-solvent behavior. In some cases, the swelling behavior and morphology may not match. The reasons for that are discussed in detail in the thesis. The discussed approach is only capable of predicting capsule morphology for certain polymer-solvent pairs. In practice, the design of the capsules assumes the trial of a great number of polymer-solvent combinations; more complex systems consisting of three, four or even more components are often used. Evaluation of the swelling behavior of each component pair of such systems becomes unreasonable. Therefore, exploitation of the solubility parameter approach was found to be more useful. The latter allows consideration of the properties of each single component instead of the pair of components. In such a manner, the Hansen Solubility Parameter (HSP) approach was used for further analysis. Solubility spheres were constructed for polyurethane, polyurea and polyamide. For this a three-dimensional graph is plotted with dispersion, polar and hydrogen bonding components of solubility parameter, obtained from literature, as the orthogonal axes. The HSP of the solvents are used as the coordinates for the points on the HSP graph. Then a sphere with a certain radius is located on a graph, and the "good" solvents would be located inside the sphere, while the "poor" ones are located outside. Both the location of the sphere center and the sphere radius should be fitted according to the information on polymer swelling behavior in a number of solvents. According to the existing correlation between the capsule morphology and swelling behavior of polymers, the solvents located inside the solubility sphere of a polymer give capsules with compact morphologies. The solvents located outside the solubility sphere of the solvent give either core-shell or multicompartment capsules in combination with the chosen polymer. Once the solubility sphere of a polymer is found, the solubility/swelling behavior is approximated to all possible substances. HSP theory allows therefore prediction of polymer solubility/swelling behavior and consequently the capsule morphology for any given substance with known HSP parameters on the basis of limited data. The latter makes the theory so attractive for application in chemistry and technology, since the choice of the system components is usually performed on the basis of a large number of different parameters that should mutually match. Even slight change of the technology sometimes leads to the necessity to find the analogue of this or that solvent in a sense of solvency but carrying different chemistry. Usage of the HSP approach in this case is indispensable. In the second part of the work examples of the HSP application for the fabrication of capsules with on-demand-morphology are presented. Capsules with compact or core-shell morphology containing corrosion inhibitors were synthesized. Thus, alkoxysilanes possessing long hydrophobic tail, combining passivating and water-repelling properties, were encapsulated in polyurethane shell. The mechanism of action of the active material required core-shell morphology of the capsules. The new hybrid corrosion inhibitor, cerium diethylhexyl phosphate, was encapsulated in polyamide shells in order to facilitate the dispersion of the substance and improve its adhesion to the coating matrix. The encapsulation of commercially available antifouling agents in polyurethane shells was carried out in order to control its release behavior and colloidal stability. Capsules with compact morphology made of polyurea containing the liquid corrosion inhibitor 2-methyl benzothiazole were synthesized in order to improve the colloidal stability of the substance. Capsules with compact morphology allow slower release of the liquid encapsulated material compared to the core-shell ones. If the "in-situ" encapsulation is not possible due to the reaction of the oil-soluble monomer with the encapsulated material, a solution was proposed: loading of the capsules should be performed after monomer deactivation due to the accomplishment of the polymerization reaction. Capsules of desired morphologies should be preformed followed by the loading step. In this way, compact polyurea capsules containing the highly effective but chemically active corrosion inhibitors 8-hydroxyquinoline and benzotriazole were fabricated. All the resulting capsules were successfully introduced into model coatings. The efficiency of the resulting "smart" self-healing anticorrosion coatings on steel and aluminium alloy of the AA-2024 series was evaluated using characterization techniques such as Scanning Vibrating Electron Spectroscopy, Electrochemical Impedance Spectroscopy and salt-spray chamber tests.}, language = {en} } @phdthesis{WindirschWoiwode2024, author = {Windirsch-Woiwode, Torben}, title = {Permafrost carbon stabilisation by recreating a herbivore-driven ecosystem}, doi = {10.25932/publishup-62424}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-624240}, school = {Universit{\"a}t Potsdam}, pages = {X, 104, A-57}, year = {2024}, abstract = {With Arctic ground as a huge and temperature-sensitive carbon reservoir, maintaining low ground temperatures and frozen conditions to prevent further carbon emissions that contrib-ute to global climate warming is a key element in humankind's fight to maintain habitable con-ditions on earth. Former studies showed that during the late Pleistocene, Arctic ground condi-tions were generally colder and more stable as the result of an ecosystem dominated by large herbivorous mammals and vast extents of graminoid vegetation - the mammoth steppe. Characterised by high plant productivity (grassland) and low ground insulation due to animal-caused compression and removal of snow, this ecosystem enabled deep permafrost aggrad-ation. Now, with tundra and shrub vegetation common in the terrestrial Arctic, these effects are not in place anymore. However, it appears to be possible to recreate this ecosystem local-ly by artificially increasing animal numbers, and hence keep Arctic ground cold to reduce or-ganic matter decomposition and carbon release into the atmosphere. By measuring thaw depth, total organic carbon and total nitrogen content, stable carbon iso-tope ratio, radiocarbon age, n-alkane and alcohol characteristics and assessing dominant vegetation types along grazing intensity transects in two contrasting Arctic areas, it was found that recreating conditions locally, similar to the mammoth steppe, seems to be possible. For permafrost-affected soil, it was shown that intensive grazing in direct comparison to non-grazed areas reduces active layer depth and leads to higher TOC contents in the active layer soil. For soil only frozen on top in winter, an increase of TOC with grazing intensity could not be found, most likely because of confounding factors such as vertical water and carbon movement, which is not possible with an impermeable layer in permafrost. In both areas, high animal activity led to a vegetation transformation towards species-poor graminoid-dominated landscapes with less shrubs. Lipid biomarker analysis revealed that, even though the available organic material is different between the study areas, in both permafrost-affected and sea-sonally frozen soils the organic material in sites affected by high animal activity was less de-composed than under less intensive grazing pressure. In conclusion, high animal activity af-fects decomposition processes in Arctic soils and the ground thermal regime, visible from reduced active layer depth in permafrost areas. Therefore, grazing management might be utilised to locally stabilise permafrost and reduce Arctic carbon emissions in the future, but is likely not scalable to the entire permafrost region.}, language = {en} } @phdthesis{RuizRodriguez2019, author = {Ruiz Rodriguez, Janete Lorena}, title = {Osmotic pressure effects on collagen mimetic peptides}, school = {Universit{\"a}t Potsdam}, pages = {139}, year = {2019}, abstract = {Collagen is the most abundant protein in mammals. In many tissues, collagen molecules assemble to form a hierarchical structure. In the smallest supramolecular unit, named fibril, each molecule is displaced in the axial direction with respect to its neighbors. This staggering creates a periodic gap and overlap regions, where the gap regions exhibit 20\% less density. These fibril-forming collagens play an essential role in the strength of connective tissues. Despite much effort, directed at understanding collagen function and regulation, the influence of the chemical environment on the local structural and mechanical properties remains poorly understood. Recent studies, aimed at elucidating the effect of osmotic pressure, showed that collagen contracts upon water removal. This observation highlights the importance of water for the stabilization and mechanics of the collagen molecule. Using collagen mimetic peptides (CMPs), which fold into triple helical structures reminiscent of natural collagen, the primary goal of this work was to investigate the effect of the osmotic pressure on specific collagen-mimetic sequences. CMPs were used as the model system as they provide sequence control, which is essential for discriminating local from global structural changes and for relating the observed effects to existing knowledge about the full-length collagen molecule. Of specific interest was the structure of individual collagen triple helices as well as their organization into self-assembled higher order structures. These key structural features were monitored with infrared spectroscopy (IR) and synchrotron X-ray scattering, while varying the osmotic pressure. For controlling the osmotic pressure, CMP powder samples were incubated in air of defined relative humidity, ranging from dry conditions to highly "humid". In addition, to obtain more biologically relevant conditions, the CMPs were measured in ultrapure water and in solutions containing small molecule osmolytes. Using the sequences (Pro-Pro-Gly)10, (Pro-Hyp-Gly)10 and (Hyp-Hyp-Gly)10, it was shown that CMPs with different degrees of proline hydroxylation (Hyp = hydroxyproline) exhibit a sequence-specific response to osmotic pressure. IR spectroscopy revealed that osmotic pressure changes affect the strength of the triple helix stabilizing, interchain hydrogen bond and that the extent of this change depends on the degree of hydroxylation. X-ray scattering experiments further showed that changes in osmotic pressure affect both the molecular length as well as the higher order organization of CMPs. Starting from a pseudo-hexagonal packing in the dry state, all three CMPs showed isotropic swelling when increasing the water content to approximately 1.2 water molecules per amino acid, again to different extents depending on the degree of hydroxylation. When increasing the water content further, this pseudo-hexagonal arrangement breaks down. In the fully hydrated state, each CMP is characterized by its own specific and more complex packing geometry. While these changes in the lateral packing arrangement suggest swelling upon hydration, an overall decrease of the molecular length (i.e. contraction) was observed in the axial direction. Also for this structural feature, a strong dependency on the specific amino acid sequence was found. Interestingly, the observed contraction is the opposite of what has been reported for natural collagen. As (Pro-Pro-Gly)n, (Pro-Hyp-Gly)n and (Hyp-Hyp-Gly)n repeat units are found in collagen with a relatively high abundance, this suggests that other collagen sequence fragments need to respond to hydration in the opposite way to obtain a net elongation of the full-length collagen molecule. To test this hypothesis, sequences predicted to be sensitive to osmotic pressure were considered. One such sequence, consisting of two repeat units (Ala-Arg-Gly-Ser-Asp-Gly), was inserted as a guest into a (Pro-Pro-Gly) host. When compared to the canonical CMP sequences investigated earlier, the lateral helix packing follows a similar trend with increasing hydration; however, the host-guest CMP axially elongates with increasing water content. This behavior is more similar to what has been found for natural collagen and suggests that different sequences do determine the molecular length of collagen sequences differently. Interestingly, the canonical sequences are more abundant in the overlap region while the guest sequence is found in the gap region. This allows to speculate that sequences in the gap and overlap regions possess a specifically fine-tuned local response to osmotic pressure changes. Clearly, more experiments with additional sequences are needed to confirm this. In conclusion, the results obtained in this work indicate a highly sequence specific interaction between collagen and water. Osmotic pressure-induced conformational changes mostly originate from local geometries and bonding patterns and affect both the structure of individual triple helices as well as higher order assemblies. One key remaining question is how these conformational changes affect the local mechanical properties of the collagen molecule. As a first step, the stiffness (persistence length) of full-length collagen was determined using atomic force microscopy. In the future, experimental strategies need to be developed that allow for investigating the mechanical properties of specific collagen sequences, e.g. performing single-molecule force spectroscopy of CMPs.}, language = {en} } @phdthesis{Jongejans2022, author = {Jongejans, Loeka Laura}, title = {Organic matter stored in ice-rich permafrost}, doi = {10.25932/publishup-56491}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-564911}, school = {Universit{\"a}t Potsdam}, pages = {xxiii, 178}, year = {2022}, abstract = {The Arctic is changing rapidly and permafrost is thawing. Especially ice-rich permafrost, such as the late Pleistocene Yedoma, is vulnerable to rapid and deep thaw processes such as surface subsidence after the melting of ground ice. Due to permafrost thaw, the permafrost carbon pool is becoming increasingly accessible to microbes, leading to increased greenhouse gas emissions, which enhances the climate warming. The assessment of the molecular structure and biodegradability of permafrost organic matter (OM) is highly needed. My research revolves around the question "how does permafrost thaw affect its OM storage?" More specifically, I assessed (1) how molecular biomarkers can be applied to characterize permafrost OM, (2) greenhouse gas production rates from thawing permafrost, and (3) the quality of OM of frozen and (previously) thawed sediments. I studied deep (max. 55 m) Yedoma and thawed Yedoma permafrost sediments from Yakutia (Sakha Republic). I analyzed sediment cores taken below thermokarst lakes on the Bykovsky Peninsula (southeast of the Lena Delta) and in the Yukechi Alas (Central Yakutia), and headwall samples from the permafrost cliff Sobo-Sise (Lena Delta) and the retrogressive thaw slump Batagay (Yana Uplands). I measured biomarker concentrations of all sediment samples. Furthermore, I carried out incubation experiments to quantify greenhouse gas production in thawing permafrost. I showed that the biomarker proxies are useful to assess the source of the OM and to distinguish between OM derived from terrestrial higher plants, aquatic plants and microbial activity. In addition, I showed that some proxies help to assess the degree of degradation of permafrost OM, especially when combined with sedimentological data in a multi-proxy approach. The OM of Yedoma is generally better preserved than that of thawed Yedoma sediments. The greenhouse gas production was highest in the permafrost sediments that thawed for the first time, meaning that the frozen Yedoma sediments contained most labile OM. Furthermore, I showed that the methanogenic communities had established in the recently thawed sediments, but not yet in the still-frozen sediments. My research provided the first molecular biomarker distributions and organic carbon turnover data as well as insights in the state and processes in deep frozen and thawed Yedoma sediments. These findings show the relevance of studying OM in deep permafrost sediments.}, language = {en} } @phdthesis{Dubinovska2013, author = {Dubinovska, Daria}, title = {Optical surveys of AGN and their host galaxies}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64739}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {This thesis rests on two large Active Galactic Nuclei (AGNs) surveys. The first survey deals with galaxies that host low-level AGNs (LLAGN) and aims at identifying such galaxies by quantifying their variability. While numerous studies have shown that AGNs can be variable at all wavelengths, the nature of the variability is still not well understood. Studying the properties of LLAGNs may help to understand better galaxy evolution, and how AGNs transit between active and inactive states. In this thesis, we develop a method to extract variability properties of AGNs. Using multi-epoch deep photometric observations, we subtract the contribution of the host galaxy at each epoch to extract variability and estimate AGN accretion rates. This pipeline will be a powerful tool in connection with future deep surveys such as PANSTARS. The second study in this thesis describes a survey of X-ray selected AGN hosts at redshifts z>1.5 and compares them to quiescent galaxies. This survey aims at studying environments, sizes and morphologies of star-forming high-redshift AGN hosts in the COSMOS Survey at the epoch of peak AGN activity. Between redshifts 1.51.5 to date. We analyzed the evolution of structural parameters of AGN and non-AGN host galaxies with redshift, and compared their disturbance rates to identify the more probable AGN triggering mechanism in the 43.5 50 nm, mesopores between 2 - 50 nm). Thereto, new strategies for the synthesis of novel carbon materials with designed porosity were developed that are in particular useful for the storage of energy. Besides the porosity, it is the graphene structure itself that determines the properties of a carbon material. Non-graphitic carbon materials usually exhibit a quite large degree of disorder with many defects in the graphene structure, and thus exhibit inherent microporosity (d < 2nm). These pores are traps and oppose reversible interaction with the carbon matrix. Furthermore they reduce the stability and conductivity of the carbon material, which was undesired for the proposed applications. As one part of this work, the graphene structures of different non-graphitic carbon materials were studied in detail using a novel wide-angle x-ray scattering model that allowed precise information about the nature of the carbon building units (graphene stacks). Different carbon precursors were evaluated regarding their potential use for the synthesis shown in this work, whereas mesophase pitch proved to be advantageous when a less disordered carbon microstructure is desired. By using mesophase pitch as carbon precursor, two templating strategies were developed using the nanocasting approach. The synthesized (monolithic) materials combined for the first time the advantages of a hierarchical interconnected pore system in the macro- and mesorange with the advantages of mesophase pitch as carbon precursor. In the first case, hierarchical macro- / mesoporous carbon monoliths were synthesized by replication of hard (silica) templates. Thus, a suitable synthesis procedure was developed that allowed the infiltration of the template with the hardly soluble carbon precursor. In the second case, hierarchical macro- / mesoporous carbon materials were synthesized by a novel soft-templating technique, taking advantage of the phase separation (spinodal decomposition) between mesophase pitch and polystyrene. The synthesis also allowed the generation of monolithic samples and incorporation of functional nanoparticles into the material. The synthesized materials showed excellent properties as an anode material in lithium batteries and support material for supercapacitors.}, language = {en} } @phdthesis{Lepre2023, author = {Lepre, Enrico}, title = {Nitrogen-doped carbonaceous materials for energy and catalysis}, doi = {10.25932/publishup-57739}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-577390}, school = {Universit{\"a}t Potsdam}, pages = {153}, year = {2023}, abstract = {Facing the environmental crisis, new technologies are needed to sustain our society. In this context, this thesis aims to describe the properties and applications of carbon-based sustainable materials. In particular, it reports the synthesis and characterization of a wide set of porous carbonaceous materials with high nitrogen content obtained from nucleobases. These materials are used as cathodes for Li-ion capacitors, and a major focus is put on the cathode preparation, highlighting the oxidation resistance of nucleobase-derived materials. Furthermore, their catalytic properties for acid/base and redox reactions are described, pointing to the role of nitrogen speciation on their surfaces. Finally, these materials are used as supports for highly dispersed nickel loading, activating the materials for carbon dioxide electroreduction.}, language = {en} } @phdthesis{Meinke2006, author = {Meinke, Anja}, title = {Nikotineffekte auf r{\"a}umliche Aufmerksamkeitsprozesse bei Nichtrauchern}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7659}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {Nikotin in den unterschiedlichsten Darreichungsformen verringert bei verschiedenen Spezies im r{\"a}umlichen Hinweisreizparadigma die Kosten invalider Hinweisreize. Welcher Teilprozess genau durch Nikotin beeinflusst wird, ist bislang nicht untersucht worden. Die g{\"a}ngige Interpretation ist, daß Nikotin das Losl{\"o}sen von Aufmerksamkeit von einem bisher beachteten Ort erleichtert. In f{\"u}nf Studien, drei elektrophysiologischen und zwei behavioralen wurden drei m{\"o}gliche Mechanismen der Nikotinwirkung an Nichtrauchern untersucht. Experiment 1 und 2 gingen der Frage nach, ob Nikotin eine Modulation sensorischer gain Kontrolle bewirkt. Dazu wurden ereigniskorrelierte Potentiale (EKP) im Posner-Paradigma erhoben und die Wirkung von Nikotin auf die aufmerksamkeitsassoziierten Komponenten P1 und N1 betrachtet. Nikotin verringerte die Kosten invalider Hinweisreize bei Aufmerksamkeitslenkung durch endogene Hinweisreize, nicht aber bei exogenen Hinweisreizen. Die P1 und N1 Komponenten zeigten sich unbeeinflusst von Nikotin, damit findet also die Annahme einer Wirkung auf sensorische Suppression keine Unterst{\"u}tzung. In Experiment 3 und 4 wurde untersucht, ob Nikotin einen Effekt auf kostentr{\"a}chtige unwillk{\"u}rliche Aufmerksamkeitsverschiebungen, Distraktionen, hat. In Experiment 3 wurden in einem r{\"a}umlichen Daueraufmerksamkeitsparadigma Distraktionen durch deviante Stimulusmerkmale ausgel{\"o}st und die Wirkung von Nikotin auf eine distraktionsassoziierte Komponente des EKP, die P3a, betrachtet. In Experiment 4 wurde in einem Hinweisreizparadigma durch zus{\"a}tzliche Stimuli eine Distraktion ausgel{\"o}st und die Nikotinwirkung auf die Reaktionszeitkosten untersucht. Nikotin zeigte keinen Einfluss auf Distraktionskosten in beiden Studien und auch keine Wirkung auf die P3a Komponente in Experiment 3. In Experiment 4 wurde zus{\"a}tzlich die Wirkung von Nikotin auf das Losl{\"o}sen von Aufmerksamkeit untersucht, indem die Schwierigkeit des Losl{\"o}sens variiert wurde. Auch hier zeigte sich keine Nikotinwirkung. Allerdings konnte in beiden Studien weder die h{\"a}ufig berichtete generelle Reaktionszeitverk{\"u}rzung noch die Verringerung der Kosten invalider Hinweisreize repliziert werden, so dass zum Einen keine Aussage {\"u}ber die Wirkung von Nikotin auf Distraktionen oder den Aufmerksamkeitslosl{\"o}seprozess gemacht werden k{\"o}nnen, zum Anderen sich die Frage stellte, unter welchen Bedingungen Nikotin einen differentiellen Effekt {\"u}berhaupt zeigt. Im letzten Experiment wurde hierzu die H{\"a}ufigkeit der Reaktionsanforderung einerseits und die zeitlichen Aspekte der Aufmerksamkeitslenkung andererseits variiert und der Effekt des Nikotins auf den Validit{\"a}tseffekt, die Reaktionszeitdifferenz zwischen valide und invalide vorhergesagten Zielreizen, betrachtet. Nikotin verringerte bei Individuen, bei denen Aufmerksamkeitslenkung in allen Bedingungen evident war, in der Tendenz den Validit{\"a}tseffekt in der ereignis{\"a}rmsten Bedingung, wenn nur selten willentliche Aufmerksamkeitsausrichtung notwendig war. Dies k{\"o}nnte als Hinweis gedeutet werden, dass Nikotin unter Bedingungen, die große Anforderungen an die Vigilanz stellen, die top-down Zuweisung von Aufmerksamkeitsressourcen unterst{\"u}tzt.}, subject = {Nicotin}, language = {de} } @phdthesis{Gruner2023, author = {Gruner, David}, title = {New frontiers in gyrochronology}, doi = {10.25932/publishup-61526}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-615268}, school = {Universit{\"a}t Potsdam}, pages = {x, 131}, year = {2023}, abstract = {Late-type stars are by far the most frequent stars in the universe and of fundamental interest to various fields of astronomy - most notably to Galactic archaeology and exoplanet research. However, such stars barely change during their main sequence lifetime; their temperature, luminosity, or chemical composition evolve only very slowly over the course of billions of years. As such, it is difficult to obtain the age of such a star, especially when it is isolated and no other indications (like cluster association) can be used. Gyrochronology offers a way to overcome this problem. Stars, just like all other objects in the universe, rotate and the rate at which stars rotate impacts many aspects of their appearance and evolution. Gyrochronology leverages the observed rotation rate of a late-type main sequence star and its systematic evolution to estimate their ages. Unlike the above-mentioned parameters, the rotation rate of a main sequence star changes drastically throughout its main sequence lifetime; stars spin down. The youngest stars rotate every few hours, whereas much older stars rotate only about once a month, or - in the case of some late M-stars - once in a hundred days. Given that this spindown is systematic (with an additional mass dependence), it gave rise to the idea of using the observed rotation rate of a star (and its mass or a suitable proxy thereof) to estimate a star's age. This has been explored widely in young stellar open clusters but remains essentially unconstrained for stars older than the sun, and K and M stars older than 1 Gyr. This thesis focuses on the continued exploration of the spindown behavior to assess, whether gyrochronology remains applicable for stars of old ages, whether it is universal for late-type main sequence stars (including field stars), and to provide calibration mileposts for spindown models. To accomplish this, I have analyzed data from Kepler space telescope for the open clusters Ruprecht 147 (2.7 Gyr old) and M 67 (4 Gyr). Time series photometry data (light curves) were obtained for both clusters during Kepler's K2 mission. However, due to technical limitations and telescope malfunctions, extracting usable data from the K2 mission to identify (especially long) rotation periods requires extensive data preparation. For Ruprecht 147, I have compiled a list of about 300 cluster members from the literature and adopted preprocessed light curves from the Kepler archive where available. They have been cleaned of the gravest of data artifacts but still contained systematics. After correcting them for said artifacts, I was able to identify rotation periods in 31 of them. For M 67 more effort was taken. My work on Ruprecht 147 has shown the limitations imposed by the preselection of Kepler targets. Therefore, I adopted the time series full frame image directly and performed photometry on a much higher spatial resolution to be able to obtain data for as many stars as possible. This also means that I had to deal with the ubiquitous artifacts in Kepler data. For that, I devised a method that correlates the artificial flux variations with the ongoing drift of the telescope pointing in order to remove it. This process was a large success and I was able to create light curves whose quality match and even exceede those that were created by the Kepler mission - all while operating on higher spatial resolution and processing fainter stars. Ultimately, I was able to identify signs of periodic variability in the (created) light curves for 31 and 47 stars in Ruprecht 147 and M 67, respectively. My data connect well to bluer stars of cluster of the same age and extend for the first time to stars redder than early-K and older than 1 Gyr. The cluster data show a clear flattening in the distribution of Ruprecht 147 and even a downturn for M 67, resulting in a somewhat sinusoidal shape. With that, I have shown that the systematic spindown of stars continues at least until 4 Gyr and stars continue to live on a single surface in age-rotation periods-mass space which allows gyrochronology to be used at least up to that age. However, the shape of the spindown - as exemplified by the newly discovered sinusoidal shape of the cluster sequence - deviates strongly from the expectations. I then compiled an extensive sample of rotation data in open clusters - very much including my own work - and used the resulting cluster skeleton (with each cluster forming a rip in color-rotation period-mass space) to investigate if field stars follow the same spindown as cluster stars. For the field stars, I used wide binaries, which - with their shared origin and coevality - are in a sense the smallest possible open clusters. I devised an empirical method to evaluate the consistency between the rotation rates of the wide binary components and found that the vast majority of them are in fact consistent with what is observed in open clusters. This leads me to conclude that gyrochronology - calibrated on open clusters - can be applied to determine the ages of field stars.}, language = {en} } @phdthesis{Schulze2017, author = {Schulze, Nicole}, title = {Neue Templatphasen zur anisotropen Goldnanopartikelherstellung durch den Einsatz strukturbildender Polymere}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-409515}, school = {Universit{\"a}t Potsdam}, pages = {VI, 117, xv}, year = {2017}, abstract = {Ziel der vorliegenden Arbeit war die Synthese und Charakterisierung von anisotropen Goldnanopartikeln in einer geeigneten Polyelektrolyt-modifizierten Templatphase. Der Mittelpunkt bildet dabei die Auswahl einer geeigneten Templatphase, zur Synthese von einheitlichen und reproduzierbaren anisotropen Goldnanopartikeln mit den daraus resultierenden besonderen Eigenschaften. Bei der Synthese der anisotropen Goldnanopartikeln lag der Fokus in der Verwendung von Vesikeln als Templatphase, wobei hier der Einfluss unterschiedlicher strukturbildender Polymere (stark alternierende Maleamid-Copolymere PalH, PalPh, PalPhCarb und PalPhBisCarb mit verschiedener Konformation) und Tenside (SDS, AOT - anionische Tenside) bei verschiedenen Synthese- und Abtrennungsbedingungen untersucht werden sollte. Im ersten Teil der Arbeit konnte gezeigt werden, dass PalPhBisCarb bei einem pH-Wert von 9 die Bedingungen eines R{\"o}hrenbildners f{\"u}r eine morphologische Transformation von einer vesikul{\"a}ren Phase in eine r{\"o}hrenf{\"o}rmige Netzwerkstruktur erf{\"u}llt und somit als Templatphase zur formgesteuerten Bildung von Nanopartikeln genutzt werden kann. Im zweiten Teil der Arbeit wurde dargelegt, dass die Templatphase PalPhBisCarb (pH-Wert von 9, Konzentration von 0,01 wt.\%) mit AOT als Tensid und PL90G als Phospholipid (im Verh{\"a}ltnis 1:1) die effektivste Wahl einer Templatphase f{\"u}r die Bildung von anisotropen Strukturen in einem einstufigen Prozess darstellt. Bei einer konstanten Synthesetemperatur von 45 °C wurden die besten Ergebnisse bei einer Goldchloridkonzentration von 2 mM, einem Gold-Templat-Verh{\"a}ltnis von 3:1 und einer Synthesezeit von 30 Minuten erzielt. Ausbeute an anisotropen Strukturen lag bei 52 \% (Anteil an dreieckigen Nanopl{\"a}ttchen von 19 \%). Durch Erh{\"o}hung der Synthesetemperatur konnte die Ausbeute auf 56 \% (29 \%) erh{\"o}ht werden. Im dritten Teil konnte durch zeitabh{\"a}ngige Untersuchungen gezeigt werden, dass bei Vorhandensein von PalPhBisCarb die Bildung der energetisch nicht bevorzugten Pl{\"a}ttchen-Strukturen bei Raumtemperatur initiiert wird und bei 45 °C ein Optimum annimmt. Kintetische Untersuchungen haben gezeigt, dass die Bildung dreieckiger Nanopl{\"a}ttchen bei schrittweiser Zugabe der Goldchlorid-Pr{\"a}kursorl{\"o}sung zur PalPhBisCarb enthaltenden Templatphase durch die Dosierrate der vesikul{\"a}ren Templatphase gesteuert werden kann. In umgekehrter Weise findet bei Zugabe der Templatphase zur Goldchlorid-Pr{\"a}kursorl{\"o}sung bei 45 °C ein {\"a}hnlicher, kinetisch gesteuerter Prozess der Bildung von Nanodreiecken statt mit einer maximalen Ausbeute dreieckigen Nanopl{\"a}ttchen von 29 \%. Im letzten Kapitel erfolgten erste Versuche zur Abtrennung dreieckiger Nanopl{\"a}ttchen von den {\"u}brigen Geometrien der gemischten Nanopartikell{\"o}sung mittels tensidinduzierter Verarmungsf{\"a}llung. Bei Verwendung von AOT mit einer Konzentration von 0,015 M wurde eine Ausbeute an Nanopl{\"a}ttchen von 99 \%, wovon 72 \% dreieckiger Geometrien hatten, erreicht.}, language = {de} } @phdthesis{Djalali2023, author = {Djalali, Saveh Arman}, title = {Multiresponsive complex emulsions: Concepts for the design of active and adaptive liquid colloidal systems}, doi = {10.25932/publishup-57520}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-575203}, school = {Universit{\"a}t Potsdam}, pages = {151}, year = {2023}, abstract = {Complex emulsions are dispersions of kinetically stabilized multiphasic emulsion droplets comprised of two or more immiscible liquids that provide a novel material platform for the generation of active and dynamic soft materials. In recent years, the intrinsic reconfigurable morphological behavior of complex emulsions, which can be attributed to the unique force equilibrium between the interfacial tensions acting at the various interfaces, has become of fundamental and applied interest. As such, particularly biphasic Janus droplets have been investigated as structural templates for the generation of anisotropic precision objects, dynamic optical elements or as transducers and signal amplifiers in chemo- and bio-sensing applications. In the present thesis, switchable internal morphological responses of complex droplets triggered by stimuli-induced alterations of the balance of interfacial tensions have been explored as a universal building block for the design of multiresponsive, active, and adaptive liquid colloidal systems. A series of underlying principles and mechanisms that influence the equilibrium of interfacial tensions have been uncovered, which allowed the targeted design of emulsion bodies that can alter their shape, bind and roll on surfaces, or change their geometrical shape in response to chemical stimuli. Consequently, combinations of the unique triggerable behavior of Janus droplets with designer surfactants, such as a stimuli-responsive photosurfactant (AzoTAB) resulted for instance in shape-changing soft colloids that exhibited a jellyfish inspired buoyant motion behavior, holding great promise for the design of biological inspired active material architectures and transformable soft robotics. In situ observations of spherical Janus emulsion droplets using a customized side-view microscopic imaging setup with accompanying pendant dropt measurements disclosed the sensitivity regime of the unique chemical-morphological coupling inside complex emulsions and enabled the recording of calibration curves for the extraction of critical parameters of surfactant effectiveness. The deduced new "responsive drop" method permitted a convenient and cost-efficient quantification and comparison of the critical micelle concentrations (CMCs) and effectiveness of various cationic, anionic, and nonionic surfactants. Moreover, the method allowed insightful characterization of stimuli-responsive surfactants and monitoring of the impact of inorganic salts on the CMC and surfactant effectiveness of ionic and nonionic surfactants. Droplet functionalization with synthetic crown ether surfactants yielded a synthetically minimal material platform capable of autonomous and reversible adaptation to its chemical environment through different supramolecular host-guest recognition events. Addition of metal or ammonium salts resulted in the uptake of the resulting hydrophobic complexes to the hydrocarbon hemisphere, whereas addition of hydrophilic ammonium compounds such as amino acids or polypeptides resulted in supramolecular assemblies at the hydrocarbon-water interface of the droplets. The multiresponsive material platform enabled interfacial complexation and thus triggered responses of the droplets to a variety of chemical triggers including metal ions, ammonium compounds, amino acids, antibodies, carbohydrates as well as amino-functionalized solid surfaces. In the final chapter, the first documented optical logic gates and combinatorial logic circuits based on complex emulsions are presented. More specifically, the unique reconfigurable and multiresponsive properties of complex emulsions were exploited to realize droplet-based logic gates of varying complexity using different stimuli-responsive surfactants in combination with diverse readout methods. In summary, different designs for multiresponsive, active, and adaptive liquid colloidal systems were presented and investigated, enabling the design of novel transformative chemo-intelligent soft material platforms.}, language = {en} } @phdthesis{Stoermann2023, author = {St{\"o}rmann, Florian Konstantin}, title = {Multifunctional Microballoons for the active and passive control of fluid-flows}, school = {Universit{\"a}t Potsdam}, pages = {XVI, 104, A24}, year = {2023}, abstract = {Functional materials, also called "Smart Materials", are described by their ability to fulfill a desired task through targeted interaction with its environment. Due to this functional integration, such materials are of increased interest, especially in areas where the increasing micronization of components is required. Modern manufacturing processes (e.g. microfluidics) and the availability of a wide variety of functional materials (e.g. shape memory materials) now enable the production of particle-based switching components. This category includes micropumps and microvalves, whose basic function is the active control of liquid flows. One approach in realizing those microcomponents as pursued by this work, enables variable size-switching of water-filled microballoons by implementing a stimulus-sensitive switching motif in the capsule's membrane shell, while being under the influence of a constant driving force. The switching motif with its gatekeeper function has a critical influence on one or more material parameters, which modulate the capsule's resistance against the driving force in microballoon expansion process. The advantage of this concept is that even non-variable analyte conditions, such as concentration levels of ions, can be capitalized to generate external force fields that, under the control of the membrane, cause an inflation of the microballoon by an osmotically driven water influx. In case of osmotic pressure gradients as the driving force for the capsule expansion, material parameters associated with the gatekeeper function are specifically the permeability and the mechanical stiffness of the shell material. While a modulation of the shell permeability could be utilized to kinetically impede the water influx on large time scales, a modulation of the shell's mechanical stiffness even might be utilized to completely prevent the capsule inflation due to a possible non-deformability beneath a certain threshold pressure. In polymer networks, which are a suitable material class for the demanded capsule shell because of their excellent elasticity, both the permeability and the mechanical properties are strongly influenced by the crystallinity of the material. Since the permeability is effectively reduced with increasing crystallinity, while the mechanical stiffness is simultaneously greatly increased, both effects point in the same direction in terms of their functional relationship. For this reason and due to a reversible and contactless modulation of the membrane crystallinity by heat input, crystallites may be suitable switching motifs for controlling the capsule expansion. As second design element of reversible expandable microballoons, the capsule geometry, defined by an aqueous core enveloped by the temperature-sensitive polymer network membrane, should allow an osmotic pressure gradient across the membrane layer. The strength of the inflation pressure and the associated inflation velocity upon membrane melting should be controlled by the salt concentration within the aqueous core, while a turn in the osmotic gradient should furthermore allow the reversible process of capsule deflation. Therefore, it should be possible to build either microvalves and micropumps, while their intended action of either pumping or valving is determined by their state of expansion and the direction of the osmotic pressure gradient.. Microballoons of approximately 300 µm in diameter were formed via droplet-based microfluidics from double-emulsion templates (w/o/w). The elastomeric capsule membrane was formed by photo-crosslinking of methacrylate (MA) functionalized oligo(ε-caprolactone) precursors (≈ 3.8 MA-arms, Mn ≈ 12000 g mol-1) within the organic medium layer (o) via UV-exposure after droplet-formation. After removal of the toluene/chloroform mixture by slow extraction via the continuous aqueous phase, the capsules solidified under the development of a characteristic "mushroom"-like shape at specific experimental conditions (e.g. λ = 308 nm, 57 mJ·s-1·cm-2, 16 min). It could be furthermore shown that in dependency to the process parameters: oligomer concentration and curing-time also spherical capsules were accessible. Long curing-times and high oligomer concentrations at a fixed light-intensity favored the formation of "mushroom"-like capsules, whereas the contrary led to spherical shaped capsules. A comparative study on thin polymer network films of same composition and equal treatment proved a correlation between the film's crosslink density and their contraction capability, while stronger crosslinked polymer networks showed a stronger contraction after solvent removal. In combination with observations during capsule solidification via light-microscopy, where a continuous shaping from almost spherical crosslinked templates to "mushroom"-shaped and solidified capsules was stated, the following mechanism was proposed. In case of low oligomer contents and short curing-times, the contraction of the capsule shell during solvent removal is strongly diminished due to a low degree of crosslinking. Therefore, the solidifying shell could freely collapse onto the aqueous core. In the other case, high oligomer concentrations and long curing-times will favor the formation of highly crosslinked capsule membranes with a strong contraction capability. Due to an observed decentered location of the aqueous core within the swollen polymer network, an uneven radial stress along the capsule's circumference is exerted to the incompressible core. This lead to an uneven contraction during solvent removal and a directed flow of the core fluid into the direction of the minimal stress vector. In consequence, the initially thicker spherical cap contracts, whereas the opposing thinner spherical cap get stretched. The "mushroom"-shape over some advantages over their spherical shaped counterparts, why they were selected for the further experiments. Besides the necessity of a high density of crosslinking for the purpose of extraordinary elasticity and toughness, the form-anisotropy promotes a faster microballoon expandability due to a partial reduction of the membrane thickness. Additionally, pre-stretched regions of thin thickness might provide a better resistance against inflation pressure than spherical but non-stretched capsules of equal membrane thickness. The resulting "mushroom"-shaped microcapsules exhibited a melting point of Tm ≈ 50 - 60 °C and a degree of crystallinity of Xc ≈ 29 - 38 \% depending on the membrane thickness and internal salt content, which is slightly lower than for the non-crosslinked oligomer and reasoned by a limited chain mobility upon crosslinking. Nonetheless, the melting transition of the polymer network was associated with a strong drop in its mechanical stiffness, which was shown to have a strong influence on the osmotic driven expansion of the microcapsules. Capsules that were subjected to osmotic pressures between 1.5 and 4.7 MPa did not expand if the temperature was well below the melting point of the capsule's membrane, i.e. at room temperature. In contrast, a continuous expansion, while approaching asymptotically to a final capsule size, was observed if the temperature exceeded the melting point, i.e. 60 °C. Microballoons, which were kept for 56 days at ∆Π = 1.5 MPa and room temperature, did not change significantly in diameter, why the impact of the mechanical stiffness on the expansion behavior is considered to be the greater than the influence of the shell permeability. The time-resolved expansion behavior of the microballoons above their Tm was subsequently modeled, using difusion equations that were corrected for shape anisotropy and elastic restoring forces. A shape-related and expansion dependent pre-factor was used to dynamically address the influence of the shell thickness differences along the circumference on the inflation velocity, whereas the microballoon's elastic contraction upon inflation was rendered by the inclusion of a hyperelastic constitutive model. An important finding resulting from this model was the pronounced increase in inflation velocity compared to hypothetical capsules with a homogeneous shell thickness, which stresses the benefit of employing shape anisotropic balloon-like capsules in this study. Furthermore, the model was able to predict the finite expandability on basis of entropy-elastic recovery forces and strain-hardening effects. A comparison of six different microballoons with different shell thicknesses and internal salt contents showed the linear relationship between the volumetric expansion, the shell thickness and the applied osmotic pressure, as represented by the model. As the proposed model facilitates the prediction of the expansion kinetics depending on the membranes mechanical and diffusional characteristics, it might be a screening tool for future material selections. In course of the microballoon expansion process, capsules of intermediate diameters could be isolated by recrystallization of the membrane, which is mainly caused by a restoration of the membrane's mechanical stiffness and is otherwise difficult to achieve with other stimuli-sensitive systems. The capsule's crystallinity of intermediate expansion states was nearly unchanged, whereas the lamellar crystal size tends to decreased with the expansion ratio. Therefore, it was assumed that the elastic modulus was only minimally altered and might increased due to the networks segment-chain extension. In addition to the volume increase achieved by inflation, a turn in the osmotic gradient also facilitated the reversible deflation, which was shown in inflation/deflation cycles. These both characteristics of the introduced microballoons are important parameter regarding the realization of micropumps and microvalves. The fixation of expanded microcapsules via recrystallization enabled the storage of entropy-elastic strain-energy, which could be utilized for pumping actions in non-aqueous media. Here, the pumping velocity depended on both, the type of surrounding medium and the applied temperature. Surrounding media that supported the fast transport of pumped liquid showed an accelerated deflation, while high temperatures further accelerate the pumping velocity. Very fast rejection of the incorporated payload was furthermore realized with pierced expanded microballoons, which were subjected to temperatures above their Tm. The possible fixation of intermediate particle sizes provide opportunities for vent constructions that allowed the precise adjustment of specific flow-rates and multiple valve openings and closings. A valve construction was realized by the insertion of a single or multiple microballoons in a microfluidic channel. A complete and a partial closing of the microballoon-valves was demonstrated as a function of the heating period. In this context, a difference between the inflation and deflation velocity was stated, summarizing slower expansion kinetics. Overall, microballoons, which presented both on-demand pumping and reversible valving by a temperature-triggered change in the capsule's volume, might be suitable components that help to design fully integrated LOC devices, due to the implementation of the control switch and controllable inflation/deflation kinetics. In comparison to other state of the art stimuli-sensitive materials, one has to highlight the microballoons capability of stabilizing almost continuously intermediate capsule sizes by simple recrystallization of the microballoon's membrane.}, language = {en} } @phdthesis{Jiang2007, author = {Jiang, Chunyan}, title = {Multi-visualization and hybrid segmentation approaches within telemedicine framework}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12829}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {The innovation of information techniques has changed many aspects of our life. In health care field, we can obtain, manage and communicate high-quality large volumetric image data by computer integrated devices, to support medical care. In this dissertation I propose several promising methods that could assist physicians in processing, observing and communicating the image data. They are included in my three research aspects: telemedicine integration, medical image visualization and image segmentation. And these methods are also demonstrated by the demo software that I developed. One of my research point focuses on medical information storage standard in telemedicine, for example DICOM, which is the predominant standard for the storage and communication of medical images. I propose a novel 3D image data storage method, which was lacking in current DICOM standard. I also created a mechanism to make use of the non-standard or private DICOM files. In this thesis I present several rendering techniques on medical image visualization to offer different display manners, both 2D and 3D, for example, cut through data volume in arbitrary degree, rendering the surface shell of the data, and rendering the semi-transparent volume of the data. A hybrid segmentation approach, designed for semi-automated segmentation of radiological image, such as CT, MRI, etc, is proposed in this thesis to get the organ or interested area from the image. This approach takes advantage of the region-based method and boundary-based methods. Three steps compose the hybrid approach: the first step gets coarse segmentation by fuzzy affinity and generates homogeneity operator; the second step divides the image by Voronoi Diagram and reclassifies the regions by the operator to refine segmentation from the previous step; the third step handles vague boundary by level set model. Topics for future research are mentioned in the end, including new supplement for DICOM standard for segmentation information storage, visualization of multimodal image information, and improvement of the segmentation approach to higher dimension.}, language = {en} } @phdthesis{Ulaganathan2016, author = {Ulaganathan, Vamseekrishna}, title = {Molecular fundamentals of foam fractionation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94263}, school = {Universit{\"a}t Potsdam}, pages = {ix, 136}, year = {2016}, abstract = {Foam fractionation of surfactant and protein solutions is a process dedicated to separate surface active molecules from each other due to their differences in surface activities. The process is based on forming bubbles in a certain mixed solution followed by detachment and rising of bubbles through a certain volume of this solution, and consequently on the formation of a foam layer on top of the solution column. Therefore, systematic analysis of this whole process comprises of at first investigations dedicated to the formation and growth of single bubbles in solutions, which is equivalent to the main principles of the well-known bubble pressure tensiometry. The second stage of the fractionation process includes the detachment of a single bubble from a pore or capillary tip and its rising in a respective aqueous solution. The third and final stage of the process is the formation and stabilization of the foam created by these bubbles, which contains the adsorption layers formed at the growing bubble surface, carried up and gets modified during the bubble rising and finally ends up as part of the foam layer. Bubble pressure tensiometry and bubble profile analysis tensiometry experiments were performed with protein solutions at different bulk concentrations, solution pH and ionic strength in order to describe the process of accumulation of protein and surfactant molecules at the bubble surface. The results obtained from the two complementary methods allow understanding the mechanism of adsorption, which is mainly governed by the diffusional transport of the adsorbing protein molecules to the bubble surface. This mechanism is the same as generally discussed for surfactant molecules. However, interesting peculiarities have been observed for protein adsorption kinetics at sufficiently short adsorption times. First of all, at short adsorption times the surface tension remains constant for a while before it decreases as expected due to the adsorption of proteins at the surface. This time interval is called induction time and it becomes shorter with increasing protein bulk concentration. Moreover, under special conditions, the surface tension does not stay constant but even increases over a certain period of time. This so-called negative surface pressure was observed for BCS and BLG and discussed for the first time in terms of changes in the surface conformation of the adsorbing protein molecules. Usually, a negative surface pressure would correspond to a negative adsorption, which is of course impossible for the studied protein solutions. The phenomenon, which amounts to some mN/m, was rather explained by simultaneous changes in the molar area required by the adsorbed proteins and the non-ideality of entropy of the interfacial layer. It is a transient phenomenon and exists only under dynamic conditions. The experiments dedicated to the local velocity of rising air bubbles in solutions were performed in a broad range of BLG concentration, pH and ionic strength. Additionally, rising bubble experiments were done for surfactant solutions in order to validate the functionality of the instrument. It turns out that the velocity of a rising bubble is much more sensitive to adsorbing molecules than classical dynamic surface tension measurements. At very low BLG or surfactant concentrations, for example, the measured local velocity profile of an air bubble is changing dramatically in time scales of seconds while dynamic surface tensions still do not show any measurable changes at this time scale. The solution's pH and ionic strength are important parameters that govern the measured rising velocity for protein solutions. A general theoretical description of rising bubbles in surfactant and protein solutions is not available at present due to the complex situation of the adsorption process at a bubble surface in a liquid flow field with simultaneous Marangoni effects. However, instead of modelling the complete velocity profile, new theoretical work has been started to evaluate the maximum values in the profile as characteristic parameter for dynamic adsorption layers at the bubble surface more quantitatively. The studies with protein-surfactant mixtures demonstrate in an impressive way that the complexes formed by the two compounds change the surface activity as compared to the original native protein molecules and therefore lead to a completely different retardation behavior of rising bubbles. Changes in the velocity profile can be interpreted qualitatively in terms of increased or decreased surface activity of the formed protein-surfactant complexes. It was also observed that the pH and ionic strength of a protein solution have strong effects on the surface activity of the protein molecules, which however, could be different on the rising bubble velocity and the equilibrium adsorption isotherms. These differences are not fully understood yet but give rise to discussions about the structure of protein adsorption layer under dynamic conditions or in the equilibrium state. The third main stage of the discussed process of fractionation is the formation and characterization of protein foams from BLG solutions at different pH and ionic strength. Of course a minimum BLG concentration is required to form foams. This minimum protein concentration is a function again of solution pH and ionic strength, i.e. of the surface activity of the protein molecules. Although at the isoelectric point, at about pH 5 for BLG, the hydrophobicity and hence the surface activity should be the highest, the concentration and ionic strength effects on the rising velocity profile as well as on the foamability and foam stability do not show a maximum. This is another remarkable argument for the fact that the interfacial structure and behavior of BLG layers under dynamic conditions and at equilibrium are rather different. These differences are probably caused by the time required for BLG molecules to adapt respective conformations once they are adsorbed at the surface. All bubble studies described in this work refer to stages of the foam fractionation process. Experiments with different systems, mainly surfactant and protein solutions, were performed in order to form foams and finally recover a solution representing the foamed material. As foam consists to a large extent of foam lamella - two adsorption layers with a liquid core - the concentration in a foamate taken from foaming experiments should be enriched in the stabilizing molecules. For determining the concentration of the foamate, again the very sensitive bubble rising velocity profile method was applied, which works for any type of surface active materials. This also includes technical surfactants or protein isolates for which an accurate composition is unknown.}, language = {en} } @phdthesis{Robinson2011, author = {Robinson, Alexander}, title = {Modeling the Greenland Ice Sheet response to climate change in the past and future}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-50430}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {The Greenland Ice Sheet (GIS) contains enough water volume to raise global sea level by over 7 meters. It is a relic of past glacial climates that could be strongly affected by a warming world. Several studies have been performed to investigate the sensitivity of the ice sheet to changes in climate, but large uncertainties in its long-term response still exist. In this thesis, a new approach has been developed and applied to modeling the GIS response to climate change. The advantages compared to previous approaches are (i) that it can be applied over a wide range of climatic scenarios (both in the deep past and the future), (ii) that it includes the relevant feedback processes between the climate and the ice sheet and (iii) that it is highly computationally efficient, allowing simulations over very long timescales. The new regional energy-moisture balance model (REMBO) has been developed to model the climate and surface mass balance over Greenland and it represents an improvement compared to conventional approaches in modeling present-day conditions. Furthermore, the evolution of the GIS has been simulated over the last glacial cycle using an ensemble of model versions. The model performance has been validated against field observations of the present-day climate and surface mass balance, as well as paleo information from ice cores. The GIS contribution to sea level rise during the last interglacial is estimated to be between 0.5-4.1 m, consistent with previous estimates. The ensemble of model versions has been constrained to those that are consistent with the data, and a range of valid parameter values has been defined, allowing quantification of the uncertainty and sensitivity of the modeling approach. Using the constrained model ensemble, the sensitivity of the GIS to long-term climate change was investigated. It was found that the GIS exhibits hysteresis behavior (i.e., it is multi-stable under certain conditions), and that a temperature threshold exists above which the ice sheet transitions to an essentially ice-free state. The threshold in the global temperature is estimated to be in the range of 1.3-2.3°C above preindustrial conditions, significantly lower than previously believed. The timescale of total melt scales non-linearly with the overshoot above the temperature threshold, such that a 2°C anomaly causes the ice sheet to melt in ca. 50,000 years, but an anomaly of 6°C will melt the ice sheet in less than 4,000 years. The meltback of the ice sheet was found to become irreversible after a fraction of the ice sheet is already lost - but this level of irreversibility also depends on the temperature anomaly.}, language = {en} } @phdthesis{SarnesNitu2018, author = {Sarnes-Nitu, Juliane}, title = {Mit der Schuldenbremse zu nachhaltigen Staatsfinanzen?}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-413804}, school = {Universit{\"a}t Potsdam}, pages = {294}, year = {2018}, abstract = {The core question of this paper is: Does the debt brake secure fiscal sustainability in Germany? To answer this question, we will first examine the effects of the introduction of the debt brake on the German federal states in the period 2010-16. For this purpose, the observed consolidation performance and the consolidation incentive or pressure experienced by the federal states were evaluated with the help of a scorecard specifically developed for this purpose. Multiple regression analysis was used to analyze how the scorecard factors affect the consolidation performance of the federal states. It found that nearly 90\% of the variation was explained by the independent variables budgetary position, debt burden, revenue growth and pension burden. Thus the debt brake likely played a subordinate role in the 2009-2016 consolidation episode. Subsequently, the data collected in 65 expert interviews was used to analyze the limits of the new fiscal rule, and to determine which potential risks could hinder or prevent the debt brake in the future: municipal debt, FEUs, contingent liabilities in the form of guarantees for financial institutions and pension obligations. The frequently expressed criticism that the debt brake impedes economic growth and public investments is also reviewed and rejected. Finally, we discuss potential future developments regarding the debt brake and the German public administration as well as future consolidation efforts of the L{\"a}nder.}, language = {de} } @phdthesis{Pellegrino2022, author = {Pellegrino, Antonio}, title = {miRNA profiling for diagnosis of chronic pain in polyneuropathy}, doi = {10.25932/publishup-58385}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-583858}, school = {Universit{\"a}t Potsdam}, pages = {viii, 97, xi}, year = {2022}, abstract = {This dissertation aimed to determine differential expressed miRNAs in the context of chronic pain in polyneuropathy. For this purpose, patients with chronic painful polyneuropathy were compared with age matched healthy patients. Taken together, all miRNA pre library preparation quality controls were successful and none of the samples was identified as an outlier or excluded for library preparation. Pre sequencing quality control showed that library preparation worked for all samples as well as that all samples were free of adapter dimers after BluePippin size selection and reached the minimum molarity for further processing. Thus, all samples were subjected to sequencing. The sequencing control parameters were in their optimal range and resulted in valid sequencing results with strong sample to sample correlation for all samples. The resulting FASTQ file of each miRNA library was analyzed and used to perform a differential expression analysis. The differentially expressed and filtered miRNAs were subjected to miRDB to perform a target prediction. Three of those four miRNAs were downregulated: hsa-miR-3135b, hsa-miR-584-5p and hsa-miR-12136, while one was upregulated: hsa-miR-550a-3p. miRNA target prediction showed that chronic pain in polyneuropathy might be the result of a combination of miRNA mediated high blood flow/pressure and neural activity dysregulations/disbalances. Thus, leading to the promising conclusion that these four miRNAs could serve as potential biomarkers for the diagnosis of chronic pain in polyneuropathy. Since TRPV1 seems to be one of the major contributors of nociception and is associated with neuropathic pain, the influence of PKA phosphorylated ARMS on the sensitivity of TRPV1 as well as the part of AKAP79 during PKA phosphorylation of ARMS was characterized. Therefore, possible PKA-sites in the sequence of ARMS were identified. This revealed five canonical PKA-sites: S882, T903, S1251/52, S1439/40 and S1526/27. The single PKA-site mutants of ARMS revealed that PKA-mediated ARMS phosphorylation seems not to influence the interaction rate of TRPV1/ARMS. While phosphorylation of ARMST903 does not increase the interaction rate with TRPV1, ARMSS1526/27 is probably not phosphorylated and leads to an increased interaction rate. The calcium flux measurements indicated that the higher the interaction rate of TRPV1/ARMS, the lower the EC50 for capsaicin of TRPV1, independent of the PKA phosphorylation status of ARMS. In addition, the western blot analysis confirmed the previously observed TRPV1/ARMS interaction. More importantly, AKAP79 seems to be involved in the TRPV1/ARMS/PKA signaling complex. To overcome the problem of ARMS-mediated TRPV1 sensitization by interaction, ARMS was silenced by shRNA. ARMS silencing resulted in a restored TRPV1 desensitization without affecting the TRPV1 expression and therefore could be used as new topical therapeutic analgesic alternative to stop ARMS mediated TRPV1 sensitization.}, language = {en} } @phdthesis{Weber2007, author = {Weber, Jens}, title = {Meso- und mikropor{\"o}se Hochleistungspolymere : Synthese, Analytik und Anwendungen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-15994}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {Die Arbeit beschreibt die Synthese, Charakterisierung und Anwendung von meso- und mikropor{\"o}sen Hochleistungspolymeren. Im ersten Teil wird die Synthese von mesopor{\"o}sen Polybenzimidazol (PBI) auf der Basis einer Templatierungsmethode vorgestellt. Auf der Grundlage kommerzieller Monomere und Silikatnanopartikel sowie eines neuen Vernetzers wurde ein Polymer-Silikat-Hybridmaterial aufgebaut. Das Herausl{\"o}sen des Silikats mit Ammoniumhydrogendifluorid f{\"u}hrt zu mesopor{\"o}sen Polybenzimidazolen mit spherischen Poren von 9 bis 11 nm Durchmesser. Die Abh{\"a}ngigkeit der beobachteten Porosit{\"a}t vom Massenverh{\"a}ltnis Silikat zu Polymer wurde ebenso untersucht wie die Abh{\"a}ngigkeit der Porosit{\"a}t vom Vernetzergehalt. Die Porosit{\"a}t vollvernetzter Proben zeigt eine lineare Abh{\"a}ngigkeit vom Verh{\"a}ltnis Silikat zu Polymer bis zu einem Grenzwert von 1. Wird der Grenzwert {\"u}berschritten, ist teilweiser Porenkollaps zu beobachten. Die Abh{\"a}ngigkeit der Porosit{\"a}t vom Vernetzergehalt bei festem Silikatgehalt ist nichtlinear. Oberhalb einer kritischen Vernetzerkonzentration wird eine komplette Replikation der Nanopartikel gefunden. Ist die Vernetzerkonzentration dagegen kleiner als der kritische Wert, so ist der v{\"o}llige Kollaps einiger Poren bei Stabilit{\"a}t der verbleibenden Poren zu beobachten. Ein komplett unpor{\"o}ses PBI resultiert bei Abwesenheit des Vernetzers. Die mesopor{\"o}sen PBI-Netzwerke konnten kontrolliert mit Phosphors{\"a}ure beladen werden. Die erhaltenen Addukte wurden auf ihre Protonenleitf{\"a}higkeit untersucht. Es kann gezeigt werden, dass die Nutzung der vordefinierten Morphologie im Vergleich zu einem unstrukturierten PBI in h{\"o}heren Leitf{\"a}higkeiten resultiert. Durch die vernetzte Struktur war des Weiteren gen{\"u}gend mechanische Stabilit{\"a}t gegeben, um die Addukte reversibel und bei sehr guten Leitf{\"a}higkeiten bis zu Temperaturen von 190°C bei 0\% relativer Feuchtigkeit zu untersuchen. Dies ist f{\"u}r unstrukturierte Phosphors{\"a}ure/PBI - Addukte aus linearem PBI nicht m{\"o}glich. Im zweiten Teil der Arbeit wird die Synthese intrinsisch mikropor{\"o}ser Polyamide und Polyimide vorgestellt. Das Konzept intrinsisch mikropor{\"o}ser Polymere konnte damit auf weitere Polymerklassen ausgeweitet werden. Als zentrales, strukturinduzierendes Motiv wurde 9,9'-Spirobifluoren gew{\"a}hlt. Dieses Molek{\"u}l ist leicht und vielf{\"a}ltig zu di- bzw. tetrafunktionellen Monomeren modifizierbar. Dabei wurden bestehende Synthesevorschriften modifiziert bzw. neue Vorschriften entwickelt. Ein erster Schwerpunkt innerhalb des Kapitels lag in der Synthese und Charakterisierung von l{\"o}slichen, intrinsisch mikropor{\"o}sen, aromatischen Polyamid und Polyimid. Es konnte gezeigt werden, dass das Beobachten von Mikroporosit{\"a}t stark von der molekularen Architektur und der Verarbeitung der Polymere abh{\"a}ngig ist. Die Charakterisierung der Porosit{\"a}t erfolgte unter Nutzung von Stickstoffsorption, Kleinwinkelr{\"o}ntgenstreuung und Molecular Modeling. Es konnte gezeigt werden, dass die Proben stark vom Umgebungsdruck abh{\"a}ngigen Deformationen unterliegen. Die starke Quellung der Proben w{\"a}hrend des Sorptionsvorgangs konnte durch Anwendung des "dual sorption" Modells, also dem Auftreten von Porenf{\"u}llung und dadurch induzierter Henry-Sorption, erkl{\"a}rt werden. Der zweite Schwerpunkt des Kapitels beschreibt die Synthese und Charakterisierung mikropor{\"o}ser Polyamid- und Polyimidnetzwerke. W{\"a}hrend Polyimidnetzwerke auf Spirobifluorenbasis ausgepr{\"a}gte Mikroporosit{\"a}t und spezifische Oberfl{\"a}chen von ca. 1100 m²/g aufwiesen, war die Situation f{\"u}r entsprechende Polyamidnetzwerke abweichend. Mittels Stickstoffsorption konnte keine Mikroporosit{\"a}t nachgewiesen werden, jedoch konnte mittels SAXS eine innere Grenzfl{\"a}che von ca. 300 m²/g nachgewiesen werden. Durch die in dieser Arbeit gezeigten Experimente kann die Grenze zwischen Polymeren mit hohem freien Volumen und mikropor{\"o}sen Polymeren somit etwas genauer gezogen werden. ausgepr{\"a}gte Mikroporosit{\"a}t kann nur in extrem steifen Strukturen nachgewiesen werden. Die Kombination der Konzepte "Mesoporosit{\"a}t durch Templatierung" und "Mikroporosit{\"a}t durch strukturierte Monomere" hatte ein hierarchisch strukturiertes Polybenzimidazol zum Ergebnis. Die Pr{\"a}senz einer Strukturierung im molekularen Maßstab konnte SAXS bewiesen werden. Das so strukturierte Polybenzimidazol zeichnete sich durch eine h{\"o}here Protonenleitf{\"a}higkeit im Vergleich zu einem rein mesopor{\"o}sen PBI aus. Der letzte Teil der Arbeit besch{\"a}ftigte sich mit der Entwicklung einer neuen Synthesemethode zur Herstellung von Polybenzimidazol. Es konnte gezeigt werden, dass lineares PBI in einer eutektischen Salzschmelze aus Lithium- und Kaliumchlorid synthetisiert werden kann. Die Umsetzung der spirobifluorenbasierten Monomere zu l{\"o}slichem oder vernetztem PBI ist in der Salzschmelze m{\"o}glich.}, language = {de} } @phdthesis{Swart2017, author = {Swart, Corn{\´e}}, title = {Managing protein activity in A. thaliana}, school = {Universit{\"a}t Potsdam}, pages = {160}, year = {2017}, language = {en} } @phdthesis{Zeuschner2022, author = {Zeuschner, Steffen Peer}, title = {Magnetoacoustics observed with ultrafast x-ray diffraction}, doi = {10.25932/publishup-56109}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-561098}, school = {Universit{\"a}t Potsdam}, pages = {V, 128, IX}, year = {2022}, abstract = {In the present thesis I investigate the lattice dynamics of thin film hetero structures of magnetically ordered materials upon femtosecond laser excitation as a probing and manipulation scheme for the spin system. The quantitative assessment of laser induced thermal dynamics as well as generated picosecond acoustic pulses and their respective impact on the magnetization dynamics of thin films is a challenging endeavor. All the more, the development and implementation of effective experimental tools and comprehensive models are paramount to propel future academic and technological progress. In all experiments in the scope of this cumulative dissertation, I examine the crystal lattice of nanoscale thin films upon the excitation with femtosecond laser pulses. The relative change of the lattice constant due to thermal expansion or picosecond strain pulses is directly monitored by an ultrafast X-ray diffraction (UXRD) setup with a femtosecond laser-driven plasma X-ray source (PXS). Phonons and spins alike exert stress on the lattice, which responds according to the elastic properties of the material, rendering the lattice a versatile sensor for all sorts of ultrafast interactions. On the one hand, I investigate materials with strong magneto-elastic properties; The highly magnetostrictive rare-earth compound TbFe2, elemental Dysprosium or the technological relevant Invar material FePt. On the other hand I conduct a comprehensive study on the lattice dynamics of Bi1Y2Fe5O12 (Bi:YIG), which exhibits high-frequency coherent spin dynamics upon femtosecond laser excitation according to the literature. Higher order standing spinwaves (SSWs) are triggered by coherent and incoherent motion of atoms, in other words phonons, which I quantified with UXRD. We are able to unite the experimental observations of the lattice and magnetization dynamics qualitatively and quantitatively. This is done with a combination of multi-temperature, elastic, magneto-elastic, anisotropy and micro-magnetic modeling. The collective data from UXRD, to probe the lattice, and time-resolved magneto-optical Kerr effect (tr-MOKE) measurements, to monitor the magnetization, were previously collected at different experimental setups. To improve the precision of the quantitative assessment of lattice and magnetization dynamics alike, our group implemented a combination of UXRD and tr-MOKE in a singular experimental setup, which is to my knowledge, the first of its kind. I helped with the conception and commissioning of this novel experimental station, which allows the simultaneous observation of lattice and magnetization dynamics on an ultrafast timescale under identical excitation conditions. Furthermore, I developed a new X-ray diffraction measurement routine which significantly reduces the measurement time of UXRD experiments by up to an order of magnitude. It is called reciprocal space slicing (RSS) and utilizes an area detector to monitor the angular motion of X-ray diffraction peaks, which is associated with lattice constant changes, without a time-consuming scan of the diffraction angles with the goniometer. RSS is particularly useful for ultrafast diffraction experiments, since measurement time at large scale facilities like synchrotrons and free electron lasers is a scarce and expensive resource. However, RSS is not limited to ultrafast experiments and can even be extended to other diffraction techniques with neutrons or electrons.}, language = {en} } @phdthesis{Martin2013, author = {Martin, Benjamin}, title = {Linking individual-based models and dynamic energy budget theory : lessons for ecology and ecotoxicology}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-67001}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {In the context of ecological risk assessment of chemicals, individual-based population models hold great potential to increase the ecological realism of current regulatory risk assessment procedures. However, developing and parameterizing such models is time-consuming and often ad hoc. Using standardized, tested submodels of individual organisms would make individual-based modelling more efficient and coherent. In this thesis, I explored whether Dynamic Energy Budget (DEB) theory is suitable for being used as a standard submodel in individual-based models, both for ecological risk assessment and theoretical population ecology. First, I developed a generic implementation of DEB theory in an individual-based modeling (IBM) context: DEB-IBM. Using the DEB-IBM framework I tested the ability of the DEB theory to predict population-level dynamics from the properties of individuals. We used Daphnia magna as a model species, where data at the individual level was available to parameterize the model, and population-level predictions were compared against independent data from controlled population experiments. We found that DEB theory successfully predicted population growth rates and peak densities of experimental Daphnia populations in multiple experimental settings, but failed to capture the decline phase, when the available food per Daphnia was low. Further assumptions on food-dependent mortality of juveniles were needed to capture the population dynamics after the initial population peak. The resulting model then predicted, without further calibration, characteristic switches between small- and large-amplitude cycles, which have been observed for Daphnia. We conclude that cross-level tests help detecting gaps in current individual-level theories and ultimately will lead to theory development and the establishment of a generic basis for individual-based models and ecology. In addition to theoretical explorations, we tested the potential of DEB theory combined with IBMs to extrapolate effects of chemical stress from the individual to population level. For this we used information at the individual level on the effect of 3,4-dichloroanailine on Daphnia. The individual data suggested direct effects on reproduction but no significant effects on growth. Assuming such direct effects on reproduction, the model was able to accurately predict the population response to increasing concentrations of 3,4-dichloroaniline. We conclude that DEB theory combined with IBMs holds great potential for standardized ecological risk assessment based on ecological models.}, language = {en} } @phdthesis{Gaebert2022, author = {G{\"a}bert, Chris}, title = {Light-responsive polymer systems aiming towards programmable friction}, doi = {10.25932/publishup-55338}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-553380}, school = {Universit{\"a}t Potsdam}, pages = {XVI, 108, XXVI}, year = {2022}, abstract = {The development of novel programmable materials aiming to control friction in real-time holds potential to facilitate innovative lubrication solutions for reducing wear and energy losses. This work describes the integration of light-responsiveness into two lubricating materials, silicon oils and polymer brush surfaces. The first part focusses on the assessment on 9-anthracene ester-terminated polydimethylsiloxanes (PDMS-A) and, in particular, on the variability of rheological properties and the implications that arise with UV-light as external trigger. The applied rheometer setup contains an UV-transparent quartz-plate, which enables radiation and simultaneous measurement of the dynamic moduli. UV-A radiation (354 nm) triggers the cycloaddition reaction between the terminal functionalities of linear PDMS, resulting in chain extension. The newly-formed anthracene dimers cleave by UV-C radiation (254 nm) or at elevated temperatures (T > 130 °C). The sequential UV-A radiation and thermal reprogramming over three cycles demonstrate high conversions and reproducible programming of rheological properties. In contrast, the photochemical back reaction by UV-C is incomplete and can only partially restore the initial rheological properties. The dynamic moduli increase with each cycle in photochemical programming, presumably resulting from a chain segment re-arrangement as a result of the repeated partial photocleavage and subsequent chain length-dependent dimerization. In addition, long periods of radiation cause photooxidative degradation, which damages photo-responsive functions and consequently reduces the programming range. The absence of oxygen, however, reduces undesired side reactions. Anthracene-functionalized PDMS and native PDMS mix depending on the anthracene ester content and chain length, respectively, and allow fine-tuning of programmable rheological properties. The work shows the influence of mixing conditions during the photoprogramming step on the rheological properties, indicating that material property gradients induced by light attenuation along the beam have to be considered. Accordingly, thin lubricant films are suggested as potential application for light-programmable silicon fluids. The second part compares strategies for the grafting of spiropyran (SP) containing copolymer brushes from Si wafers and evaluates the light-responsiveness of the surfaces. Pre-experiments on the kinetics of the thermally initiated RAFT copolymerization of 2-hydroxyethyl acrylate (HEA) and spiropyran acrylate (SPA) in solution show, first, a strong retardation by SP and, second, the dependence of SPA polymerization on light. Surprisingly, the copolymerization of SPA is inhibited in the dark. These findings contribute to improve the synthesis of polar, spiropyran-containing copolymers. The comparison between initiator systems for the grafting-from approach indicates PET-RAFT superior to thermally initiated RAFT, suggesting a more efficient initiation of surface-bound CTA by light. Surface-initiated polymerization via PET-RAFT with an initiator system of EosinY (EoY) and ascorbic acid (AscA) facilitates copolymer synthesis from HEA and 5-25 mol\% SPA. The resulting polymer film with a thickness of a few nanometers was detected by atomic force microscopy (AFM) and ellipsometry. Water contact angle (CA) measurements demonstrate photo-switchable surface polarity, which is attributed to the photoisomerization between non-polar spiropyran and zwitterionic merocyanine isomer. Furthermore, the obtained spiropyran brushes show potential for further studies on light-programmable properties. In this context, it would be interesting to investigate whether swollen spiropyran-containing polymers change their configuration and thus their film thickness under the influence of light. In addition, further experiments using an AFM or microtribometer should evaluate whether light-programmable solvation enables a change in frictional properties between polymer brush surfaces.}, language = {en} } @phdthesis{Lauterbach2011, author = {Lauterbach, Stefan}, title = {Lateglacial to Holocene climatic and environmental changes in Europe : multi-proxy studies on lake sediments along a transect from northern Italy to northeastern Poland}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-58157}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Sediment records of three European lakes were investigated in order to reconstruct the regional climate development during the Lateglacial and Holocene, to investigate the response of local ecosystems to climatic fluctuations and human impact and to relate regional peculiarities of past climate development to climatic changes on a larger spatial scale. The Lake Hańcza (NE Poland) sediment record was studied with a focus on reconstructing the early Holocene climate development and identifying possible differences to Western Europe. Following the initial Holocene climatic improvement, a further climatic improvement occurred between 10 000 and 9000 cal. a BP. Apparently, relatively cold and dry climate conditions persisted in NE Poland during the first ca. 1500 years of the Holocene, most likely due to a specific regional atmospheric circulation pattern. Prevailing anticyclonic circulation linked to a high-pressure cell above the remaining Scandinavian Ice Sheet (SIS) might have blocked the eastward propagation of warm and moist Westerlies and thus attenuated the early Holocene climatic amelioration in this region until the final decay of the SIS, a pattern different from climate development in Western Europe. The Lateglacial sediment record of Lake Mondsee (Upper Austria) was investigated in order to study the regional climate development and the environmental response to rapid climatic fluctuations. While the temperature rise and environmental response at the onset of the Holocene took place quasi-synchronously, major leads and lags in proxy responses characterize the onset of the Lateglacial Interstadial. In particular, the spread of coniferous woodlands and the reduction of detrital flux lagged the initial Lateglacial warming by ca. 500-750 years. Major cooling at the onset of the Younger Dryas took place synchronously with a change in vegetation, while the increase of detrital matter flux was delayed by about 150-300 years. Complex proxy responses are also detected for short-term Lateglacial climatic fluctuations. In summary, periods of abrupt climatic changes are characterized by complex and temporally variable proxy responses, mainly controlled by ecosystem inertia and the environmental preconditions. A second study on the Lake Mondsee sediment record focused on two small-scale climate deteriorations around 8200 and 9100 cal. a BP, which have been triggered by freshwater discharges to the North Atlantic, causing a shutdown of the Atlantic meridional overturning circulation (MOC). Combining microscopic varve counting and AMS 14C dating yielded a precise duration estimate (ca. 150 years) and absolute dating of the 8.2 ka cold event, both being in good agreement with results from other palaeoclimate records. Moreover, a sudden temperature overshoot after the 8.2 ka cold event was identified, also seen in other proxy records around the North Atlantic. This was most likely caused by enhanced resumption of the MOC, which also initiated substantial shifts of oceanic and atmospheric front systems. Although there is also evidence from other proxy records for pronounced recovery of the MOC and atmospheric circulation changes after the 9.1 ka cold event, no temperature overshoot is seen in the Lake Mondsee record, indicating the complex behaviour of the global climate system. The Holocene sediment record of Lake Iseo (northern Italy) was studied to shed light on regional earthquake activity and the influence of climate variability and anthropogenic impact on catchment erosion and detrital flux into the lake. Frequent small-scale detrital layers within the sediments reflect allochthonous sediment supply by extreme surface runoff events. During the early to mid-Holocene, increased detrital flux coincides with periods of cold and wet climate conditions, thus apparently being mainly controlled by climate variability. In contrast, intervals of high detrital flux during the late Holocene partly also correlate with phases of increased human impact, reflecting the complex influences on catchment erosion processes. Five large-scale event layers within the sediments, which are composed of mass-wasting deposits and turbidites, are supposed to have been triggered by strong local earthquakes. While the uppermost of these event layers is assigned to a documented adjacent earthquake in AD 1222, the four other layers are supposed to be related to previously undocumented prehistorical earthquakes.}, language = {en} } @phdthesis{Littmann2024, author = {Littmann, Daniela-Christin}, title = {Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track}, doi = {10.25932/publishup-62437}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-624374}, school = {Universit{\"a}t Potsdam}, pages = {xii, 110}, year = {2024}, abstract = {The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models.}, language = {en} } @phdthesis{Robalo2018, author = {Robalo, Jo{\~a}o Ramiro Alavedra Mendes}, title = {Investigating the role of fluorinated amino acids on protein structure and function using simulation}, school = {Universit{\"a}t Potsdam}, pages = {84}, year = {2018}, language = {en} } @phdthesis{Muench2018, author = {M{\"u}nch, Thomas}, title = {Interpretation of temperature signals from ice cores}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414963}, school = {Universit{\"a}t Potsdam}, pages = {xxi, 197}, year = {2018}, abstract = {Earth's climate varies continuously across space and time, but humankind has witnessed only a small snapshot of its entire history, and instrumentally documented it for a mere 200 years. Our knowledge of past climate changes is therefore almost exclusively based on indirect proxy data, i.e. on indicators which are sensitive to changes in climatic variables and stored in environmental archives. Extracting the data from these archives allows retrieval of the information from earlier times. Obtaining accurate proxy information is a key means to test model predictions of the past climate, and only after such validation can the models be used to reliably forecast future changes in our warming world. The polar ice sheets of Greenland and Antarctica are one major climate archive, which record information about local air temperatures by means of the isotopic composition of the water molecules embedded in the ice. However, this temperature proxy is, as any indirect climate data, not a perfect recorder of past climatic variations. Apart from local air temperatures, a multitude of other processes affect the mean and variability of the isotopic data, which hinders their direct interpretation in terms of climate variations. This applies especially to regions with little annual accumulation of snow, such as the Antarctic Plateau. While these areas in principle allow for the extraction of isotope records reaching far back in time, a strong corruption of the temperature signal originally encoded in the isotopic data of the snow is expected. This dissertation uses observational isotope data from Antarctica, focussing especially on the East Antarctic low-accumulation area around the Kohnen Station ice-core drilling site, together with statistical and physical methods, to improve our understanding of the spatial and temporal isotope variability across different scales, and thus to enhance the applicability of the proxy for estimating past temperature variability. The presented results lead to a quantitative explanation of the local-scale (1-500 m) spatial variability in the form of a statistical noise model, and reveal the main source of the temporal variability to be the mixture of a climatic seasonal cycle in temperature and the effect of diffusional smoothing acting on temporally uncorrelated noise. These findings put significant limits on the representativity of single isotope records in terms of local air temperature, and impact the interpretation of apparent cyclicalities in the records. Furthermore, to extend the analyses to larger scales, the timescale-dependency of observed Holocene isotope variability is studied. This offers a deeper understanding of the nature of the variations, and is crucial for unravelling the embedded true temperature variability over a wide range of timescales.}, language = {en} } @phdthesis{Simsek2022, author = {Simsek, Ibrahim}, title = {Ink-based preparation of chalcogenide perovskites as thin films for PV applications}, doi = {10.25932/publishup-57271}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-572711}, school = {Universit{\"a}t Potsdam}, pages = {iv, 113}, year = {2022}, abstract = {The increasing demand for energy in the current technological era and the recent political decisions about giving up on nuclear energy diverted humanity to focus on alternative environmentally friendly energy sources like solar energy. Although silicon solar cells are the product of a matured technology, the search for highly efficient and easily applicable materials is still ongoing. These properties made the efficiency of halide perovskites comparable with silicon solar cells for single junctions within a decade of research. However, the downside of halide perovskites are poor stability and lead toxicity for the most stable ones. On the other hand, chalcogenide perovskites are one of the most promising absorber materials for the photovoltaic market, due to their elemental abundance and chemical stability against moisture and oxygen. In the search of the ultimate solar absorber material, combining the good optoelectronic properties of halide perovskites with the stability of chalcogenides could be the promising candidate. Thus, this work investigates new techniques for the synthesis and design of these novel chalcogenide perovskites, that contain transition metals as cations, e.g., BaZrS3, BaHfS3, EuZrS3, EuHfS3 and SrHfS3. There are two stages in the deposition techniques of this study: In the first stage, the binary compounds are deposited via a solution processing method. In the second stage, the deposited materials are annealed in a chalcogenide atmosphere to form the perovskite structure by using solid-state reactions. The research also focuses on the optimization of a generalized recipe for a molecular ink to deposit precursors of chalcogenide perovskites with different binaries. The implementation of the precursor sulfurization resulted in either binaries without perovskite formation or distorted perovskite structures, whereas some of these materials are reported in the literature as they are more favorable in the needle-like non-perovskite configuration. Lastly, there are two categories for the evaluation of the produced materials: The first category is about the determination of the physical properties of the deposited layer, e.g., crystal structure, secondary phase formation, impurities, etc. For the second category, optoelectronic properties are measured and compared to an ideal absorber layer, e.g., band gap, conductivity, surface photovoltage, etc.}, language = {en} } @phdthesis{Doerge2015, author = {D{\"o}rge, Christina}, title = {Informatische Schl{\"u}sselkompetenzen}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-262-9}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-70470}, school = {Universit{\"a}t Potsdam}, pages = {458}, year = {2015}, abstract = {Seit den 60er Jahren gibt es im deutschsprachigen Raum Diskussionen um die Begriffe Schl{\"u}sselqualifikation und (Schl{\"u}ssel-)Kompetenz, welche seit ca. 2000 auch in der Informatikdidaktik angekommen sind. Die Diskussionen der Fachdisziplinen und ihre Bedeutung f{\"u}r die Informatikdidaktik sind Gegenstand des ersten Teils dieser Dissertation. Es werden Rahmenmodelle zur Strukturierung und Einordnung von Kompetenzen entworfen, die f{\"u}r alle Fachdisziplinen nutzbar sind. Im zweiten Teil wird ein methodologischer Weg gezeigt, Schl{\"u}sselkompetenzen herzuleiten, ohne normativ vorgehen zu m{\"u}ssen. Hierzu wird das Verfahren der Qualitativen Inhaltsanalyse (QI) auf informatikdidaktische Ansätze angewendet. Die resultierenden Kompetenzen werden in weiteren Schritten verfeinert und in die zuvor entworfenen Rahmenmodelle eingeordnet. Das Ergebnis sind informatische Schl{\"u}sselkompetenzen, welche ein spezifisches Bild der Informatik zeichnen und zur Analyse bereits bestehender Curricula genutzt werden können. Zusätzlich zeigt das Verfahren einen Weg auf, wie Schl{\"u}sselkompetenzen auf nicht-normativem Wege generell hergeleitet werden können.}, language = {de} } @phdthesis{Beamish2019, author = {Beamish, Alison Leslie}, title = {Hyperspectral remote sensing of the spatial and temporal heterogeneity of low Arctic vegetation}, doi = {10.25932/publishup-42592}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-425922}, school = {Universit{\"a}t Potsdam}, pages = {v, 102}, year = {2019}, abstract = {Arctic tundra ecosystems are experiencing warming twice the global average and Arctic vegetation is responding in complex and heterogeneous ways. Shifting productivity, growth, species composition, and phenology at local and regional scales have implications for ecosystem functioning as well as the global carbon and energy balance. Optical remote sensing is an effective tool for monitoring ecosystem functioning in this remote biome. However, limited field-based spectral characterization of the spatial and temporal heterogeneity limits the accuracy of quantitative optical remote sensing at landscape scales. To address this research gap and support current and future satellite missions, three central research questions were posed: • Does canopy-level spectral variability differ between dominant low Arctic vegetation communities and does this variability change between major phenological phases? • How does canopy-level vegetation colour images recorded with high and low spectral resolution devices relate to phenological changes in leaf-level photosynthetic pigment concentrations? • How does spatial aggregation of high spectral resolution data from the ground to satellite scale influence low Arctic tundra vegetation signatures and thereby what is the potential of upcoming hyperspectral spaceborne systems for low Arctic vegetation characterization? To answer these questions a unique and detailed database was assembled. Field-based canopy-level spectral reflectance measurements, nadir digital photographs, and photosynthetic pigment concentrations of dominant low Arctic vegetation communities were acquired at three major phenological phases representing early, peak and late season. Data were collected in 2015 and 2016 in the Toolik Lake Research Natural Area located in north central Alaska on the North Slope of the Brooks Range. In addition to field data an aerial AISA hyperspectral image was acquired in the late season of 2016. Simulations of broadband Sentinel-2 and hyperspectral Environmental and Mapping Analysis Program (EnMAP) satellite reflectance spectra from ground-based reflectance spectra as well as simulations of EnMAP imagery from aerial hyperspectral imagery were also obtained. Results showed that canopy-level spectral variability within and between vegetation communities differed by phenological phase. The late season was identified as the most discriminative for identifying many dominant vegetation communities using both ground-based and simulated hyperspectral reflectance spectra. This was due to an overall reduction in spectral variability and comparable or greater differences in spectral reflectance between vegetation communities in the visible near infrared spectrum. Red, green, and blue (RGB) indices extracted from nadir digital photographs and pigment-driven vegetation indices extracted from ground-based spectral measurements showed strong significant relationships. RGB indices also showed moderate relationships with chlorophyll and carotenoid pigment concentrations. The observed relationships with the broadband RGB channels of the digital camera indicate that vegetation colour strongly influences the response of pigment-driven spectral indices and digital cameras can track the seasonal development and degradation of photosynthetic pigments. Spatial aggregation of hyperspectral data from the ground to airborne, to simulated satel-lite scale was influenced by non-photosynthetic components as demonstrated by the distinct shift of the red edge to shorter wavelengths. Correspondence between spectral reflectance at the three scales was highest in the red spectrum and lowest in the near infra-red. By artificially mixing litter spectra at different proportions to ground-based spectra, correspondence with aerial and satellite spectra increased. Greater proportions of litter were required to achieve correspondence at the satellite scale. Overall this thesis found that integrating multiple temporal, spectral, and spatial data is necessary to monitor the complexity and heterogeneity of Arctic tundra ecosystems. The identification of spectrally similar vegetation communities can be optimized using non-peak season hyperspectral data leading to more detailed identification of vegetation communities. The results also highlight the power of vegetation colour to link ground-based and satellite data. Finally, a detailed characterization non-photosynthetic ecosystem components is crucial for accurate interpretation of vegetation signals at landscape scales.}, language = {en} } @phdthesis{Schimpf2020, author = {Schimpf, Stefan}, title = {Herkunft und Ablagerungsmilieu quart{\"a}rer Sedimente im Einzugsgebiet des Heihe, NW China}, school = {Universit{\"a}t Potsdam}, pages = {xi, 186}, year = {2020}, abstract = {Der zentralasiatische Naturraum, wie er sich uns heute pr{\"a}sentiert, ist das Ergebnis eines Zusammenwirkens vieler verschiedener Faktoren {\"u}ber Jahrmillionen hinweg. Im aktuellen Kontext des Klimawandels zeigt sich jedoch, wie stark sich Stofffl{\"u}sse auch kurzfristig {\"a}ndern und dabei das Gesicht der Landschaft verwandeln k{\"o}nnen. Die Gobi-W{\"u}ste in der Inneren Mongolei (China), als Teil der gleichnamigen Trockenregionen Nordwestchinas, ist aufgrund der Ausgestaltung ihrer landschaftspr{\"a}genden Elemente sowie ihrer Landschaftsdynamik, im Zusammenhang mit der Lage zum Tibet-Plateau, in den Fokus der klimageschichtlichen Grundlagenforschung ger{\"u}ckt. Als großes Langzeitarchiv unterschiedlichster fluvialer, lakustriner und {\"a}olischer Sedimente stellt sie eine bedeutende Lokalit{\"a}t zur Rekonstruktion von lokalen und regionalen Stofffl{\"u}ssen dar.. Andererseits ist die Gobi-W{\"u}ste zugleich auch eine bedeutende Quelle f{\"u}r den {\"u}berregionalen Staubtransport, da sie aufgrund der klimatischen Bedingungen insbesondere der Erosion durch Ausblasung preisgegeben wird. Vor diesem Hintergrund erfolgten zwischen 2011 und 2014, im Rahmen des BMBF-Verbundprogramms WTZ Zentralasien - Monsundynamik \& Geo{\"o}kosysteme (F{\"o}rderkennzeichen 03G0814), mehrere deutsch-chinesische Expeditionen in das Ejina-Becken (Innere Mongolei) und das Qilian Shan-Vorland. Im Zuge dieser Expeditionen wurden f{\"u}r eine Bestimmung potenzieller Sedimentquellen erstmals zahlreiche Oberfl{\"a}chenproben aus dem gesamten Einzugsgebiet des Heihe (schwarzer Fluss) gesammelt. Zudem wurden mit zwei Bohrungen im inneren des Ejina-Beckens, erg{\"a}nzende Sedimentbohrkerne zum bestehenden Bohrkern D100 (siehe W{\"u}nnemann (2005)) abgeteuft, um weit reichende, erg{\"a}nzende Informationen zur Landschaftsgeschichte und zum {\"u}berregionalen Sedimenttransfer zu erhalten. Gegenstand und Ziel der vorliegenden Doktorarbeit ist die sedimentologisch-mineralogische Charakterisierung des Untersuchungsgebietes in Bezug auf potenzielle Sedimentquellen und Stofffl{\"u}sse des Ejina-Beckens sowie die Rekonstruktion der Ablagerungsgeschichte eines dort erbohrten, 19m langen Sedimentbohrkerns (GN100). Schwerpunkt ist hierbei die Kl{\"a}rung der Sedimentherkunft innerhalb des Bohrkerns sowie die Ausweisung von Herkunftssignalen und m{\"o}glichen Sedimentquellen bzw. Sedimenttransportpfaden. Die methodische Herangehensweise basiert auf einem Multi-Proxy-Ansatz zur Charakterisierung der klastischen Sedimentfazies anhand von Gel{\"a}ndebeobachtungen, lithologisch-granulometrischen und mineralogisch-geochemischen Analysen sowie statistischen Verfahren. F{\"u}r die mineralogischen Untersuchungen der Sedimente wurde eine neue, rasterelektronenmikroskopische Methode zur automatisierten Partikelanalyse genutzt und den traditionellen Methoden gegen{\"u}bergestellt. Die synoptische Betrachtung der granulometrischen, geochemischen und mineralogischen Befunde der Oberfl{\"a}chensedimente ergibt f{\"u}r das Untersuchungsgebiet ein logisches Kaskadenmodell mit immer wiederkehrenden Prozessbereichen und {\"a}hnlichen Prozesssignalen. Die umfangreichen granulometrischen Analysen deuten dabei auf abnehmende Korngr{\"o}ßen mit zunehmender Entfernung vom Qilian Shan hin und erm{\"o}glichen die Identifizierung von vier texturellen Signalen: den fluvialen Sanden, den D{\"u}nensanden, den Stillwassersedimenten und St{\"a}uben. Diese Ergebnisse k{\"o}nnen als Interpretationsgrundlage f{\"u}r die Korngr{\"o}ßenanalysen des Bohrkerns genutzt werden. Somit ist es m{\"o}glich, die Ablagerungsgeschichte der Bohrkernsedimente zu rekonstruieren und in Verbindung mit eigenen und literaturbasierten Datierungen in einen Gesamtkontext einzuh{\"a}ngen. F{\"u}r das Untersuchungsgebiet werden somit vier Ablagerungsphasen ausgewiesen, die bis in die Zeit des letzten glazialen Maximums (LGM) zur{\"u}ckreichen. W{\"a}hrend dieser Ablagerungsphasen kam es im Zuge unterschiedlicher Aktivit{\"a}ts- und Stabilit{\"a}tsphasen zu einer kontinuierlichen Progradation und {\"U}berpr{\"a}gung des Schwemmf{\"a}chers. Eine besonders aktive Phase kann zwischen 8 ka und 4 ka BP festgestellt werden, w{\"a}hrend der es aufgrund zunehmender fluvialer Aktivit{\"a}ten zu einer deutlich verst{\"a}rkten Schwemmf{\"a}cherdynamik gekommen zu sein scheint. In den Abschnitten davor und danach waren es vor allem {\"a}olische Prozesse, die zu einer {\"U}berpr{\"a}gung des Schwemmf{\"a}chers gef{\"u}hrt haben. Hinsichtlich der mineralogischen Herkunftssignale gibt es eine große Variabilit{\"a}t. Dies spiegelt die enorme Heterogenit{\"a}t der Geologie des Untersuchungsgebietes wider, wodurch die r{\"a}umlichen Signale nicht sehr stark ausgepr{\"a}gt sind. Dennoch, k{\"o}nnen f{\"u}r das Einzugsgebiet drei gr{\"o}ßere Bereiche deklariert werden, die als Herkunftsgebiet in Frage kommen. Das {\"o}stliche Qilian Shan Vorland zeichnet sich dabei durch deutlich h{\"o}here Chloritgehalte als prim{\"a}re Quelle f{\"u}r die Sedimente im Ejina-Becken aus. Sie unterscheiden sich insbesondere durch stark divergierende Chloritgehalte in der Tonmineral- und Gesamtmineralfraktion, was das {\"o}stliche Qilian Shan Vorland als prim{\"a}re Quelle f{\"u}r die Sedimente im Ejina-Becken auszeichnet. Dies steht in Zusammenhang mit den Gr{\"u}nschiefern, Ophioliten und Serpentiniten in diesem Bereich. Geochemisch deutet vor allem das Cr/Rb-Verh{\"a}ltnis eine große Variabilit{\"a}t innerhalb des Einzugsgebietes an. Auch hier ist es das {\"o}stliche Vorland, welches aufgrund seines hohen Anteils an mafischen Gesteinen reich an Chromiten und Spinellen ist und sich somit vom restlichen Untersuchungsgebiet abhebt. Die zeitliche aber auch die generelle Variabilit{\"a}t der Sedimentherkunft l{\"a}sst sich in den Bohrkernsedimenten nicht so deutlich nachzeichnen. Die mineralogisch-sedimentologischen Eigenschaften der erbohrten klastischen Sedimente zeugen zwar von zwischenzeitlichen {\"A}nderungen bei der Sedimentherkunft, diese sind jedoch nicht so deutlich ausgepr{\"a}gt, wie es die Quellsignale in den Oberfl{\"a}chensedimenten vermuten lassen. Ein Grund daf{\"u}r scheint die starke Vermischung unterschiedlichster Sedimente w{\"a}hrend des Transportes zu sein. Die Kombination der Korngr{\"o}ßenergebnisse mit den Befunden der Gesamt- und Schwermineralogie deuten darauf hin, dass es zwischenzeitlich eine Phase mit {\"u}berwiegend {\"a}olischen Prozessen gegeben hat, die mit einem Sedimenteintrag aus dem westlichen Bei Shan in Verbindung stehen. Neben der Zunahme ultrastabiler Schwerminerale wie Zirkon und Granat und der Abnahme opaker Schwerminerale, weisen vor allem die heutigen Verh{\"a}ltnisse darauf hin. Der Vergleich der traditionellen Schwermineralanalyse mit der Computer-Controlled-Scanning-Electron-Microscopy (kurz: CCSEM), die eine automatisierte Partikelauswertung der Proben erm{\"o}glicht, zeigt den deutlichen Vorteil der modernen Analysemethode. Neben einem zeitlichen Vorteil, den man durch die automatisierte Abarbeitung der vorbereiteten Proben erlangen kann, steht vor allem die deutlich gr{\"o}ßere statistische Signifikanz des Ergebnisses im Vordergrund. Zudem k{\"o}nnen mit dieser Methode auch chemische Variet{\"a}ten einiger Schwerminerale bestimmt werden, die eine noch feinere Klassifizierung und sicherere Aussagen zu einer m{\"o}glichen Sedimentherkunft erm{\"o}glichen. Damit ergeben sich außerdem verbesserte Aussagen zu Zusammensetzungen und Entstehungsprozessen der abgelagerten Sedimente. Die Studie verdeutlicht, dass die Sedimentherkunft innerhalb des Untersuchungsgebietes sowie die ablaufenden Prozesse zum Teil stark von lokalen Gegebenheiten abh{\"a}ngen. Die Heterogenit{\"a}t der Geologie und die Gr{\"o}ße des Einzugsgebietes sowie die daraus resultierende Komplexit{\"a}t der Sedimentgenese, machen exakte Zuordnungen zu klar definierten Sedimentquellen sehr schwer. Dennoch zeigen die Ergebnisse, dass die Sedimentzufuhr in das Ejina-Becken in erster Linie durch fluviale klastische Sedimente des Heihe aus dem Qilian Shan erfolgt sein muss. Die Untersuchungsergebnisse zeigen jedoch ebenso die Notwendigkeit einer erg{\"a}nzenden Bearbeitung angrenzender Untersuchungsgebiete, wie beispielsweise den Gobi-Altai im Norden oder den Beishan im Westen, sowie die Verdichtung der Oberfl{\"a}chenbeprobung zur feineren Aufl{\"o}sung von lokalen Sedimentquellen.}, language = {de} } @phdthesis{Ziege2022, author = {Ziege, Ricardo}, title = {Growth dynamics and mechanical properties of E. coli biofilms}, doi = {10.25932/publishup-55986}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-559869}, school = {Universit{\"a}t Potsdam}, pages = {xi, 123}, year = {2022}, abstract = {Biofilms are complex living materials that form as bacteria get embedded in a matrix of self-produced protein and polysaccharide fibres. The formation of a network of extracellular biopolymer fibres contributes to the cohesion of the biofilm by promoting cell-cell attachment and by mediating biofilm-substrate interactions. This sessile mode of bacteria growth has been well studied by microbiologists to prevent the detrimental effects of biofilms in medical and industrial settings. Indeed, biofilms are associated with increased antibiotic resistance in bacterial infections, and they can also cause clogging of pipelines or promote bio-corrosion. However, biofilms also gained interest from biophysics due to their ability to form complex morphological patterns during growth. Recently, the emerging field of engineered living materials investigates biofilm mechanical properties at multiple length scales and leverages the tools of synthetic biology to tune the functions of their constitutive biopolymers. This doctoral thesis aims at clarifying how the morphogenesis of Escherichia coli (E. coli) biofilms is influenced by their growth dynamics and mechanical properties. To address this question, I used methods from cell mechanics and materials science. I first studied how biological activity in biofilms gives rise to non-uniform growth patterns. In a second study, I investigated how E. coli biofilm morphogenesis and its mechanical properties adapt to an environmental stimulus, namely the water content of their substrate. Finally, I estimated how the mechanical properties of E. coli biofilms are altered when the bacteria express different extracellular biopolymers. On nutritive hydrogels, micron-sized E. coli cells can build centimetre-large biofilms. During this process, bacterial proliferation and matrix production introduce mechanical stresses in the biofilm, which release through the formation of macroscopic wrinkles and delaminated buckles. To relate these biological and mechanical phenomena, I used time-lapse fluorescence imaging to track cell and matrix surface densities through the early and late stages of E. coli biofilm growth. Colocalization of high cell and matrix densities at the periphery precede the onset of mechanical instabilities at this annular region. Early growth is detected at this outer annulus, which was analysed by adding fluorescent microspheres to the bacterial inoculum. But only when high rates of matrix production are present in the biofilm centre, does overall biofilm spreading initiate along the solid-air interface. By tracking larger fluorescent particles for a long time, I could distinguish several kinematic stages of E. coli biofilm expansion and observed a transition from non-linear to linear velocity profiles, which precedes the emergence of wrinkles at the biofilm periphery. Decomposing particle velocities to their radial and circumferential components revealed a last kinematic stage, where biofilm movement is mostly directed towards the radial delaminated buckles, which verticalize. The resulting compressive strains computed in these regions were observed to substantially deform the underlying agar substrates. The co-localization of higher cell and matrix densities towards an annular region and the succession of several kinematic stages are thus expected to promote the emergence of mechanical instabilities at the biofilm periphery. These experimental findings are predicted to advance future modelling approaches of biofilm morphogenesis. E. coli biofilm morphogenesis is further anticipated to depend on external stimuli from the environment. To clarify how the water could be used to tune biofilm material properties, we quantified E. coli biofilm growth, wrinkling dynamics and rigidity as a function of the water content of the nutritive substrates. Time-lapse microscopy and computational image analysis revealed that substrates with high water content promote biofilm spreading kinetics, while substrates with low water content promote biofilm wrinkling. The wrinkles observed on biofilm cross-sections appeared more bent on substrates with high water content, while they tended to be more vertical on substrates with low water content. Both wet and dry biomass, accumulated over 4 days of culture, were larger in biofilms cultured on substrates with high water content, despite extra porosity within the matrix layer. Finally, the micro-indentation analysis revealed that substrates with low water content supported the formation of stiffer biofilms. This study shows that E. coli biofilms respond to the water content of their substrate, which might be used for tuning their material properties in view of further applications. Biofilm material properties further depend on the composition and structure of the matrix of extracellular proteins and polysaccharides. In particular, E. coli biofilms were suggested to present tissue-like elasticity due to a dense fibre network consisting of amyloid curli and phosphoethanolamine-modified cellulose. To understand the contribution of these components to the emergent mechanical properties of E. coli biofilms, we performed micro-indentation on biofilms grown from bacteria of several strains. Besides showing higher dry masses, larger spreading diameters and slightly reduced water contents, biofilms expressing both main matrix components also presented high rigidities in the range of several hundred kPa, similar to biofilms containing only curli fibres. In contrast, a lack of amyloid curli fibres provides much higher adhesive energies and more viscoelastic fluid-like material behaviour. Therefore, the combination of amyloid curli and phosphoethanolamine-modified cellulose fibres implies the formation of a composite material whereby the amyloid curli fibres provide rigidity to E. coli biofilms, whereas the phosphoethanolamine-modified cellulose rather acts as a glue. These findings motivate further studies involving purified versions of these protein and polysaccharide components to better understand how their interactions benefit biofilm functions. All three studies depict different aspects of biofilm morphogenesis, which are interrelated. The first work reveals the correlation between non-uniform biological activities and the emergence of mechanical instabilities in the biofilm. The second work acknowledges the adaptive nature of E. coli biofilm morphogenesis and its mechanical properties to an environmental stimulus, namely water. Finally, the last study reveals the complementary role of the individual matrix components in the formation of a stable biofilm material, which not only forms complex morphologies but also functions as a protective shield for the bacteria it contains. Our experimental findings on E. coli biofilm morphogenesis and their mechanical properties can have further implications for fundamental and applied biofilm research fields.}, language = {en} } @phdthesis{Hoechner2010, author = {H{\"o}chner, Andreas}, title = {GPS based analysis of earthquake induced phenomena at the Sunda Arc}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53166}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {Indonesia is one of the countries most prone to natural hazards. Complex interaction of several tectonic plates with high relative velocities leads to approximately two earthquakes with magnitude Mw>7 every year, being more than 15\% of the events worldwide. Earthquakes with magnitude above 9 happen far more infrequently, but with catastrophic effects. The most severe consequences thereby arise from tsunamis triggered by these subduction-related earthquakes, as the Sumatra-Andaman event in 2004 showed. In order to enable efficient tsunami early warning, which includes the estimation of wave heights and arrival times, it is necessary to combine different types of real-time sensor data with numerical models of earthquake sources and tsunami propagation. This thesis was created as a result of the GITEWS project (German Indonesian Tsunami Early Warning System). It is based on five research papers and manuscripts. Main project-related task was the development of a database containing realistic earthquake scenarios for the Sunda Arc. This database provides initial conditions for tsunami propagation modeling used by the simulation system at the early warning center. An accurate discretization of the subduction geometry, consisting of 25x150 subfaults was constructed based on seismic data. Green's functions, representing the deformational response to unit dip- and strike slip at the subfaults, were computed using a layered half-space approach. Different scaling relations for earthquake dimensions and slip distribution were implemented. Another project-related task was the further development of the 'GPS-shield' concept. It consists of a constellation of near field GPS-receivers, which are shown to be very valuable for tsunami early warning. The major part of this thesis is related to the geophysical interpretation of GPS data. Coseismic surface displacements caused by the 2004 Sumatra earthquake are inverted for slip at the fault. The effect of different Earth layer models is tested, favoring continental structure. The possibility of splay faulting is considered and shown to be a secondary order effect in respect to tsunamigenity for this event. Tsunami models based on source inversions are compared to satellite radar altimetry observations. Postseismic GPS time series are used to test a wide parameter range of uni- and biviscous rheological models of the asthenosphere. Steady-state Maxwell rheology is shown to be incompatible with near-field GPS data, unless large afterslip, amounting to more than 10\% of the coseismic moment is assumed. In contrast, transient Burgers rheology is in agreement with data without the need for large aseismic afterslip. Comparison to postseismic geoid observation by the GRACE satellites reveals that even with afterslip, the model implementing Maxwell rheology results in amplitudes being too small, and thus supports a biviscous asthenosphere. A simple approach based on the assumption of quasi-static deformation propagation is introduced and proposed for inversion of coseismic near-field GPS time series. Application of this approach to observations from the 2004 Sumatra event fails to quantitatively reconstruct the rupture propagation, since a priori conditions are not fulfilled in this case. However, synthetic tests reveal the feasibility of such an approach for fast estimation of rupturing properties.}, language = {en} } @phdthesis{Steding2022, author = {Steding, Svenja}, title = {Geochemical and Hydraulic Modeling of Cavernous Structures in Potash Seams}, doi = {10.25932/publishup-54818}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-548182}, school = {Universit{\"a}t Potsdam}, pages = {IX, 104}, year = {2022}, abstract = {Salt deposits offer a variety of usage types. These include the mining of rock salt and potash salt as important raw materials, the storage of energy in man-made underground caverns, and the disposal of hazardous substances in former mines. The most serious risk with any of these usage types comes from the contact with groundwater or surface water. It causes an uncontrolled dissolution of salt rock, which in the worst case can result in the flooding or collapse of underground facilities. Especially along potash seams, cavernous structures can spread quickly, because potash salts show a much higher solubility than rock salt. However, as their chemical behavior is quite complex, previous models do not account for these highly soluble interlayers. Therefore, the objective of the present thesis is to describe the evolution of cavernous structures along potash seams in space and time in order to improve hazard mitigation during the utilization of salt deposits. The formation of cavernous structures represents an interplay of chemical and hydraulic processes. Hence, the first step is to systematically investigate the dissolution and precipitation reactions that occur when water and potash salt come into contact. For this purpose, a geochemical reaction model is used. The results show that the minerals are only partially dissolved, resulting in a porous sponge like structure. With the saturation of the solution increasing, various secondary minerals are formed, whose number and type depend on the original rock composition. Field data confirm a correlation between the degree of saturation and the distance from the center of the cavern, where solution is entering. Subsequently, the reaction model is coupled with a flow and transport code and supplemented by a novel approach called 'interchange'. The latter enables the exchange of solution and rock between areas of different porosity and mineralogy, and thus ultimately the growth of the cavernous structure. By means of several scenario analyses, cavern shape, growth rate and mineralogy are systematically investigated, taking also heterogeneous potash seams into account. The results show that basically four different cases can be distinguished, with mixed forms being a frequent occurrence in nature. The classification scheme is based on the dimensionless numbers P{\´e}clet and Damk{\"o}hler, and allows for a first assessment of the hazard potential. In future, the model can be applied to any field case, using measurement data for calibration. The presented research work provides a reactive transport model that is able to spatially and temporally characterize the propagation of cavernous structures along potash seams for the first time. Furthermore, it allows to determine thickness and composition of transition zones between cavern center and unaffected salt rock. The latter is particularly important in potash mining, so that natural cavernous structures can be located at an early stage and the risk of mine flooding can thus be reduced. The models may also contribute to an improved hazard prevention in the construction of storage caverns and the disposal of hazardous waste in salt deposits. Predictions regarding the characteristics and evolution of cavernous structures enable a better assessment of potential hazards, such as integrity or stability loss, as well as of suitable mitigation measures.}, language = {en} } @phdthesis{Metz2023, author = {Metz, Malte}, title = {Finite fault earthquake source inversions}, doi = {10.25932/publishup-61974}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-619745}, school = {Universit{\"a}t Potsdam}, pages = {143}, year = {2023}, abstract = {Earthquake modeling is the key to a profound understanding of a rupture. Its kinematics or dynamics are derived from advanced rupture models that allow, for example, to reconstruct the direction and velocity of the rupture front or the evolving slip distribution behind the rupture front. Such models are often parameterized by a lattice of interacting sub-faults with many degrees of freedom, where, for example, the time history of the slip and rake on each sub-fault are inverted. To avoid overfitting or other numerical instabilities during a finite-fault estimation, most models are stabilized by geometric rather than physical constraints such as smoothing. As a basis for the inversion approach of this study, we build on a new pseudo-dynamic rupture model (PDR) with only a few free parameters and a simple geometry as a physics-based solution of an earthquake rupture. The PDR derives the instantaneous slip from a given stress drop on the fault plane, with boundary conditions on the developing crack surface guaranteed at all times via a boundary element approach. As a side product, the source time function on each point on the rupture plane is not constraint and develops by itself without additional parametrization. The code was made publicly available as part of the Pyrocko and Grond Python packages. The approach was compared with conventional modeling for different earthquakes. For example, for the Mw 7.1 2016 Kumamoto, Japan, earthquake, the effects of geometric changes in the rupture surface on the slip and slip rate distributions could be reproduced by simply projecting stress vectors. For the Mw 7.5 2018 Palu, Indonesia, strike-slip earthquake, we also modelled rupture propagation using the 2D Eikonal equation and assuming a linear relationship between rupture and shear wave velocity. This allowed us to give a deeper and faster propagating rupture front and the resulting upward refraction as a new possible explanation for the apparent supershear observed at the Earth's surface. The thesis investigates three aspects of earthquake inversion using PDR: (1) to test whether implementing a simplified rupture model with few parameters into a probabilistic Bayesian scheme without constraining geometric parameters is feasible, and whether this leads to fast and robust results that can be used for subsequent fast information systems (e.g., ground motion predictions). (2) To investigate whether combining broadband and strong-motion seismic records together with near-field ground deformation data improves the reliability of estimated rupture models in a Bayesian inversion. (3) To investigate whether a complex rupture can be represented by the inversion of multiple PDR sources and for what type of earthquakes this is recommended. I developed the PDR inversion approach and applied the joint data inversions to two seismic sequences in different tectonic settings. Using multiple frequency bands and a multiple source inversion approach, I captured the multi-modal behaviour of the Mw 8.2 2021 South Sandwich subduction earthquake with a large, curved and slow rupturing shallow earthquake bounded by two faster and deeper smaller events. I could cross-validate the results with other methods, i.e., P-wave energy back-projection, a clustering analysis of aftershocks and a simple tsunami forward model. The joint analysis of ground deformation and seismic data within a multiple source inversion also shed light on an earthquake triplet, which occurred in July 2022 in SE Iran. From the inversion and aftershock relocalization, I found indications for a vertical separation between the shallower mainshocks within the sedimentary cover and deeper aftershocks at the sediment-basement interface. The vertical offset could be caused by the ductile response of the evident salt layer to stress perturbations from the mainshocks. The applications highlight the versatility of the simple PDR in probabilistic seismic source inversion capturing features of rather different, complex earthquakes. Limitations, as the evident focus on the major slip patches of the rupture are discussed as well as differences to other finite fault modeling methods.}, language = {en} } @phdthesis{Borisova2012, author = {Borisova, Dimitriya}, title = {Feedback active coatings based on mesoporous silica containers}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-63505}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {Metalle werden oft w{\"a}hrend ihrer Anwendung korrosiven Bedingungen ausgesetzt, was ihre Alterungsbest{\"a}ndigkeit reduziert. Deswegen werden korrosionsanf{\"a}llige Metalle, wie Aluminiumlegierungen mit Schutzbeschichtungen versehen, um den Korrosionsprozess aktiv oder passiv zu verhindern. Die klassischen Schutzbeschichtungen funktionieren als physikalische Barriere zwischen Metall und korrosiver Umgebung und bieten einen passiven Korrosionsschutz nur, wenn sie unbesch{\"a}digt sind. Im Gegensatz dazu kann die Korrosion auch im Fall einer Besch{\"a}digung mittels aktiver Schutzbeschichtungen gehemmt werden. Chromathaltige Beschichtungen bieten heutzutage den besten aktiven Korrosionsschutz f{\"u}r Aluminiumlegierungen. Aufgrund ihrer Giftigkeit wurden diese weltweit verboten und m{\"u}ssen durch neue umweltfreundliche Schutzbeschichtungen ersetzt werden. Ein potentieller Ersatz sind Schutzbeschichtungen mit integrierten Nano- und Mikrobeh{\"a}ltern, die mit ungiftigem Inhibitor gef{\"u}llt sind. In dieser Arbeit werden die Entwicklung und Optimierung solcher aktiver Schutzbeschichtungen f{\"u}r die industriell wichtige Aluminiumlegierung AA2024-T3 dargestellt Mesopor{\"o}se Silika-Beh{\"a}lter wurden mit dem ungiftigen Inhibitor (2-Mercaptobenzothiazol) beladen und dann in die Matrix anorganischer (SiOx/ZrOx) oder organischer (wasserbasiert) Schichten dispergiert. Zwei Sorten von Silika-Beh{\"a}ltern mit unterschiedlichen Gr{\"o}ßen (d ≈ 80 and 700 nm) wurden verwendet. Diese haben eine große spezifische Oberfl{\"a}che (≈ 1000 m² g-1), eine enge Porengr{\"o}ßenverteilung mit mittlerer Porenweite ≈ 3 nm und ein großes Porenvolumen (≈ 1 mL g-1). Dank dieser Eigenschaften k{\"o}nnen große Inhibitormengen im Beh{\"a}lterinneren adsorbiert und gehalten werden. Die Inhibitormolek{\"u}le werden bei korrosionsbedingter Erh{\"o}hung des pH-Wertes gel{\"o}st und freigegeben. Die Konzentration, Position und Gr{\"o}ße der integrierten Beh{\"a}lter wurden variiert um die besten Bedingungen f{\"u}r einen optimalen Korrosionsschutz zu bestimmen. Es wurde festgestellt, dass eine gute Korrosionsschutzleistung durch einen Kompromiss zwischen ausreichender Inhibitormenge und guten Barriereeigenschaften hervorgerufen wird. Diese Studie erweitert das Wissen {\"u}ber die wichtigsten Faktoren, die den Korrosionsschutz beeinflussen. Somit wurde die Entwicklung effizienter, aktiver Schutzbeschichtungen erm{\"o}glicht, die auf mit Inhibitor beladenen Beh{\"a}ltern basieren.}, language = {en} } @phdthesis{Stettner2018, author = {Stettner, Samuel}, title = {Exploring the seasonality of rapid Arctic changes from space}, doi = {10.25932/publishup-42578}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-425783}, school = {Universit{\"a}t Potsdam}, pages = {XIII, 132}, year = {2018}, abstract = {Arctic warming has implications for the functioning of terrestrial Arctic ecosystems, global climate and socioeconomic systems of northern communities. A research gap exists in high spatial resolution monitoring and understanding of the seasonality of permafrost degradation, spring snowmelt and vegetation phenology. This thesis explores the diversity and utility of dense TerraSAR-X (TSX) X-Band time series for monitoring ice-rich riverbank erosion, snowmelt, and phenology of Arctic vegetation at long-term study sites in the central Lena Delta, Russia and on Qikiqtaruk (Herschel Island), Canada. In the thesis the following three research questions are addressed: • Is TSX time series capable of monitoring the dynamics of rapid permafrost degradation in ice-rich permafrost on an intra-seasonal scale and can these datasets in combination with climate data identify the climatic drivers of permafrost degradation? • Can multi-pass and multi-polarized TSX time series adequately monitor seasonal snow cover and snowmelt in small Arctic catchments and how does it perform compared to optical satellite data and field-based measurements? • Do TSX time series reflect the phenology of Arctic vegetation and how does the recorded signal compare to in-situ greenness data from RGB time-lapse camera data and vegetation height from field surveys? To answer the research questions three years of TSX backscatter data from 2013 to 2015 for the Lena Delta study site and from 2015 to 2017 for the Qikiqtaruk study site were used in quantitative and qualitative analysis complimentary with optical satellite data and in-situ time-lapse imagery. The dynamics of intra-seasonal ice-rich riverbank erosion in the central Lena Delta, Russia were quantified using TSX backscatter data at 2.4 m spatial resolution in HH polarization and validated with 0.5 m spatial resolution optical satellite data and field-based time-lapse camera data. Cliff top lines were automatically extracted from TSX intensity images using threshold-based segmentation and vectorization and combined in a geoinformation system with manually digitized cliff top lines from the optical satellite data and rates of erosion extracted from time-lapse cameras. The results suggest that the cliff top eroded at a constant rate throughout the entire erosional season. Linear mixed models confirmed that erosion was coupled with air temperature and precipitation at an annual scale, seasonal fluctuations did not influence 22-day erosion rates. The results highlight the potential of HH polarized X-Band backscatter data for high temporal resolution monitoring of rapid permafrost degradation. The distinct signature of wet snow in backscatter intensity images of TSX data was exploited to generate wet snow cover extent (SCE) maps on Qikiqtaruk at high temporal resolution. TSX SCE showed high similarity to Landsat 8-derived SCE when using cross-polarized VH data. Fractional snow cover (FSC) time series were extracted from TSX and optical SCE and compared to FSC estimations from in-situ time-lapse imagery. The TSX products showed strong agreement with the in-situ data and significantly improved the temporal resolution compared to the Landsat 8 time series. The final combined FSC time series revealed two topography-dependent snowmelt patterns that corresponded to in-situ measurements. Additionally TSX was able to detect snow patches longer in the season than Landsat 8, underlining the advantage of TSX for detection of old snow. The TSX-derived snow information provided valuable insights into snowmelt dynamics on Qikiqtaruk previously not available. The sensitivity of TSX to vegetation structure associated with phenological changes was explored on Qikiqtaruk. Backscatter and coherence time series were compared to greenness data extracted from in-situ digital time-lapse cameras and detailed vegetation parameters on 30 areas of interest. Supporting previous results, vegetation height corresponded to backscatter intensity in co-polarized HH/VV at an incidence angle of 31°. The dry, tall shrub dominated ecological class showed increasing backscatter with increasing greenness when using the cross polarized VH/HH channel at 32° incidence angle. This is likely driven by volume scattering of emerging and expanding leaves. Ecological classes with more prostrate vegetation and higher bare ground contributions showed decreasing backscatter trends over the growing season in the co-polarized VV/HH channels likely a result of surface drying instead of a vegetation structure signal. The results from shrub dominated areas are promising and provide a complementary data source for high temporal monitoring of vegetation phenology. Overall this thesis demonstrates that dense time series of TSX with optical remote sensing and in-situ time-lapse data are complementary and can be used to monitor rapid and seasonal processes in Arctic landscapes at high spatial and temporal resolution.}, language = {en} } @phdthesis{Schuette2011, author = {Sch{\"u}tte, Moritz}, title = {Evolutionary fingerprints in genome-scale networks}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57483}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Mathematical modeling of biological phenomena has experienced increasing interest since new high-throughput technologies give access to growing amounts of molecular data. These modeling approaches are especially able to test hypotheses which are not yet experimentally accessible or guide an experimental setup. One particular attempt investigates the evolutionary dynamics responsible for today's composition of organisms. Computer simulations either propose an evolutionary mechanism and thus reproduce a recent finding or rebuild an evolutionary process in order to learn about its mechanism. The quest for evolutionary fingerprints in metabolic and gene-coexpression networks is the central topic of this cumulative thesis based on four published articles. An understanding of the actual origin of life will probably remain an insoluble problem. However, one can argue that after a first simple metabolism has evolved, the further evolution of metabolism occurred in parallel with the evolution of the sequences of the catalyzing enzymes. Indications of such a coevolution can be found when correlating the change in sequence between two enzymes with their distance on the metabolic network which is obtained from the KEGG database. We observe that there exists a small but significant correlation primarily on nearest neighbors. This indicates that enzymes catalyzing subsequent reactions tend to be descended from the same precursor. Since this correlation is relatively small one can at least assume that, if new enzymes are no "genetic children" of the previous enzymes, they certainly be descended from any of the already existing ones. Following this hypothesis, we introduce a model of enzyme-pathway coevolution. By iteratively adding enzymes, this model explores the metabolic network in a manner similar to diffusion. With implementation of an Gillespie-like algorithm we are able to introduce a tunable parameter that controls the weight of sequence similarity when choosing a new enzyme. Furthermore, this method also defines a time difference between successive evolutionary innovations in terms of a new enzyme. Overall, these simulations generate putative time-courses of the evolutionary walk on the metabolic network. By a time-series analysis, we find that the acquisition of new enzymes appears in bursts which are pronounced when the influence of the sequence similarity is higher. This behavior strongly resembles punctuated equilibrium which denotes the observation that new species tend to appear in bursts as well rather than in a gradual manner. Thus, our model helps to establish a better understanding of punctuated equilibrium giving a potential description at molecular level. From the time-courses we also extract a tentative order of new enzymes, metabolites, and even organisms. The consistence of this order with previous findings provides evidence for the validity of our approach. While the sequence of a gene is actually subject to mutations, its expression profile might also indirectly change through the evolutionary events in the cellular interplay. Gene coexpression data is simply accessible by microarray experiments and commonly illustrated using coexpression networks where genes are nodes and get linked once they show a significant coexpression. Since the large number of genes makes an illustration of the entire coexpression network difficult, clustering helps to show the network on a metalevel. Various clustering techniques already exist. However, we introduce a novel one which maintains control of the cluster sizes and thus assures proper visual inspection. An application of the method on Arabidopsis thaliana reveals that genes causing a severe phenotype often show a functional uniqueness in their network vicinity. This leads to 20 genes of so far unknown phenotype which are however suggested to be essential for plant growth. Of these, six indeed provoke such a severe phenotype, shown by mutant analysis. By an inspection of the degree distribution of the A.thaliana coexpression network, we identified two characteristics. The distribution deviates from the frequently observed power-law by a sharp truncation which follows after an over-representation of highly connected nodes. For a better understanding, we developed an evolutionary model which mimics the growth of a coexpression network by gene duplication which underlies a strong selection criterion, and slight mutational changes in the expression profile. Despite the simplicity of our assumption, we can reproduce the observed properties in A.thaliana as well as in E.coli and S.cerevisiae. The over-representation of high-degree nodes could be identified with mutually well connected genes of similar functional families: zinc fingers (PF00096), flagella, and ribosomes respectively. In conclusion, these four manuscripts demonstrate the usefulness of mathematical models and statistical tools as a source of new biological insight. While the clustering approach of gene coexpression data leads to the phenotypic characterization of so far unknown genes and thus supports genome annotation, our model approaches offer explanations for observed properties of the coexpression network and furthermore substantiate punctuated equilibrium as an evolutionary process by a deeper understanding of an underlying molecular mechanism.}, language = {en} } @phdthesis{Neuharth2022, author = {Neuharth, Derek}, title = {Evolution of divergent and strike-slip boundaries in response to surface processes}, doi = {10.25932/publishup-54940}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549403}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 108}, year = {2022}, abstract = {Plate tectonics describes the movement of rigid plates at the surface of the Earth as well as their complex deformation at three types of plate boundaries: 1) divergent boundaries such as rift zones and mid-ocean ridges, 2) strike-slip boundaries where plates grind past each other, such as the San Andreas Fault, and 3) convergent boundaries that form large mountain ranges like the Andes. The generally narrow deformation zones that bound the plates exhibit complex strain patterns that evolve through time. During this evolution, plate boundary deformation is driven by tectonic forces arising from Earth's deep interior and from within the lithosphere, but also by surface processes, which erode topographic highs and deposit the resulting sediment into regions of low elevation. Through the combination of these factors, the surface of the Earth evolves in a highly dynamic way with several feedback mechanisms. At divergent boundaries, for example, tensional stresses thin the lithosphere, forcing uplift and subsequent erosion of rift flanks, which creates a sediment source. Meanwhile, the rift center subsides and becomes a topographic low where sediments accumulate. This mass transfer from foot- to hanging wall plays an important role during rifting, as it prolongs the activity of individual normal faults. When rifting continues, continents are eventually split apart, exhuming Earth's mantle and creating new oceanic crust. Because of the complex interplay between deep tectonic forces that shape plate boundaries and mass redistribution at the Earth's surface, it is vital to understand feedbacks between the two domains and how they shape our planet. In this study I aim to provide insight on two primary questions: 1) How do divergent and strike-slip plate boundaries evolve? 2) How is this evolution, on a large temporal scale and a smaller structural scale, affected by the alteration of the surface through erosion and deposition? This is done in three chapters that examine the evolution of divergent and strike-slip plate boundaries using numerical models. Chapter 2 takes a detailed look at the evolution of rift systems using two-dimensional models. Specifically, I extract faults from a range of rift models and correlate them through time to examine how fault networks evolve in space and time. By implementing a two-way coupling between the geodynamic code ASPECT and landscape evolution code FastScape, I investigate how the fault network and rift evolution are influenced by the system's erosional efficiency, which represents many factors like lithology or climate. In Chapter 3, I examine rift evolution from a three-dimensional perspective. In this chapter I study linkage modes for offset rifts to determine when fast-rotating plate-boundary structures known as continental microplates form. Chapter 4 uses the two-way numerical coupling between tectonics and landscape evolution to investigate how a strike-slip boundary responds to large sediment loads, and whether this is sufficient to form an entirely new type of flexural strike-slip basin.}, language = {en} } @phdthesis{CruzLemus2020, author = {Cruz Lemus, Saul Daniel}, title = {Enhancing Efficiency of Inverted Perovskite Solar Cells}, school = {Universit{\"a}t Potsdam}, pages = {117}, year = {2020}, abstract = {Carbon nitride and poly(ionic liquid)s (PILs) have been successfully applied in various fields of materials science owing to their outstanding properties. This thesis aims at the successful application of these polymers as innovative materials in the interfaces of hybrid organic-inorganic perovskite solar cells. A critical problem in harnessing the full thermodynamic potential of halide perovskites in solar cells is the design and modification of interfaces to reduce carrier recombination. Therefore, the interface must be properly studied and improved. This work investigated the effect of applying carbon nitride and PILs on a perovskite surface on the device performance. The facile synthetic method for modifying carbon nitride with vinyl thiazole and barbituric acid (CMB-vTA) yields 2.3 nm layers when solution processing is performed using isopropanol. The nanosheets were applied as a metal-free electron transport layer in inverted perovskite solar cells. The application of carbon nitride layers (CMB-vTA) resulted in negligible current-voltage hysteresis with a high open circuit voltage (Voc) of 1.1 V and a short-circuit current (Jsc) of 20.28 mA cm-2, which afforded efficiencies of up to 17\%. Thus, the successful implementation of a carbon nitride-based structure enabled good charge extraction with minimized interface recombination between the perovskite and PCBM. Similarly, PILs represent a new strategy of interfacial modification using an ionic polymer in an n-i-p perovskite architecture.. The application of PILs as an interfacial modifier resulted in solar cell devices with an extraordinarily high efficiency of 21.8\% and a Voc of 1.17 V. The implementation reduced non-radiative recombination at the perovskite surface through defect passivation. Finally, our work proposes a novel method to efficiently suppress non-radiative charge recombination using the unexplored properties of carbon nitride and PILs in the solar cell field. Additionally, the method for interfacial modification has general applicability because of the simplicity of the post-treatment approach, and therefore has potential applicability in other solar cells. Thus, this work opens the door to a new class of materials to be implemented.}, language = {en} } @phdthesis{Yishai2019, author = {Yishai, Oren}, title = {Engineering the reductive glycine pathway in Escherichia coli}, school = {Universit{\"a}t Potsdam}, pages = {86}, year = {2019}, language = {en} } @phdthesis{Wenk2020, author = {Wenk, Sebastian}, title = {Engineering formatotrophic growth in Escherichia coli}, school = {Universit{\"a}t Potsdam}, pages = {V, 107}, year = {2020}, abstract = {To meet the demands of a growing world population while reducing carbon dioxide (CO2) emissions, it is necessary to capture CO2 and convert it into value-added compounds. In recent years, metabolic engineering of microbes has gained strong momentum as a strategy for the production of valuable chemicals. As common microbial feedstocks like glucose directly compete with human consumption, the one carbon (C1) compound formate was suggested as an alternative feedstock. Formate can be easily produced by various means including electrochemical reduction of CO2 and could serve as a feedstock for microbial production, hence presenting a novel entry point for CO2 to the biosphere and a storage option for excess electricity. Compared to the gaseous molecule CO2, formate is a highly soluble compound that can be easily handled and stored. It can serve as a carbon and energy source for natural formatotrophs, but these microbes are difficult to cultivate and engineer. In this work, I present the results of several projects that aim to establish efficient formatotrophic growth of E. coli - which cannot naturally grow on formate - via synthetic formate assimilation pathways. In the first study, I establish a workflow for growth-coupled metabolic engineering of E. coli. I demonstrate this approach by presenting an engineering scheme for the PFL-threonine cycle, a synthetic pathway for anaerobic formate assimilation in E. coli. The described methods are intended to create a standardized toolbox for engineers that aim to establish novel metabolic routes in E. coli and related organisms. The second chapter presents a study on the catalytic efficiency of C1-oxidizing enzymes in vivo. As formatotrophic growth requires generation of both energy and biomass from formate, the engineered E. coli strains need to be equipped with a highly efficient formate dehydrogenase, which provides reduction equivalents and ATP for formate assimilation. I engineered a strain that cannot generate reducing power and energy for cellular growth, when fed on acetate. Under this condition, the strain depends on the introduction of an enzymatic system for NADH regeneration, which could further produce ATP via oxidative phosphorylation. I show that the strain presents a valuable testing platform for C1-oxidizing enzymes by testing different NAD-dependent formate and methanol dehydrogenases in the energy auxotroph strain. Using this platform, several candidate enzymes with high in vivo activity, were identified and characterized as potential energy-generating systems for synthetic formatotrophic or methylotrophic growth in E. coli.   In the third chapter, I present the establishment of the serine threonine cycle (STC) - a synthetic formate assimilation pathway - in E. coli. In this pathway, formate is assimilated via formate tetrahydrofolate ligase (FtfL) from Methylobacterium extorquens (M. extorquens). The carbon from formate is attached to glycine to produce serine, which is converted into pyruvate entering central metabolism. Via the natural threonine synthesis and cleavage route, glycine is regenerated and acetyl-CoA is produced as the pathway product. I engineered several selection strains that depend on different STC modules for growth and determined key enzymes that enable high flux through threonine synthesis and cleavage. I could show that expression of an auxiliary formate dehydrogenase was required to achieve growth via threonine synthesis and cleavage on pyruvate. By overexpressing most of the pathway enzymes from the genome, and applying adaptive laboratory evolution, growth on glycine and formate was achieved, indicating the activity of the complete cycle. The fourth chapter shows the establishment of the reductive glycine pathway (rGP) - a short, linear formate assimilation route - in E. coli. As in the STC, formate is assimilated via M. extorquens FtfL. The C1 from formate is condensed with CO2 via the reverse reaction of the glycine cleavage system to produce glycine. Another carbon from formate is attached to glycine to form serine, which is assimilated into central metabolism via pyruvate. The engineered E. coli strain, expressing most of the pathway genes from the genome, can grow via the rGP with formate or methanol as a sole carbon and energy source.}, language = {en} } @phdthesis{Miteva2007, author = {Miteva, Rositsa Stoycheva}, title = {Electron acceleration at localized wave structures in the solar corona}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-14775}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {Our dynamic Sun manifests its activity by different phenomena: from the 11-year cyclic sunspot pattern to the unpredictable and violent explosions in the case of solar flares. During flares, a huge amount of the stored magnetic energy is suddenly released and a substantial part of this energy is carried by the energetic electrons, considered to be the source of the nonthermal radio and X-ray radiation. One of the most important and still open question in solar physics is how the electrons are accelerated up to high energies within (the observed in the radio emission) short time scales. Because the acceleration site is extremely small in spatial extent as well (compared to the solar radius), the electron acceleration is regarded as a local process. The search for localized wave structures in the solar corona that are able to accelerate electrons together with the theoretical and numerical description of the conditions and requirements for this process, is the aim of the dissertation. Two models of electron acceleration in the solar corona are proposed in the dissertation: I. Electron acceleration due to the solar jet interaction with the background coronal plasma (the jet--plasma interaction) A jet is formed when the newly reconnected and highly curved magnetic field lines are relaxed by shooting plasma away from the reconnection site. Such jets, as observed in soft X-rays with the Yohkoh satellite, are spatially and temporally associated with beams of nonthermal electrons (in terms of the so-called type III metric radio bursts) propagating through the corona. A model that attempts to give an explanation for such observational facts is developed here. Initially, the interaction of such jets with the background plasma leads to an (ion-acoustic) instability associated with growing of electrostatic fluctuations in time for certain range of the jet initial velocity. During this process, any test electron that happen to feel this electrostatic wave field is drawn to co-move with the wave, gaining energy from it. When the jet speed has a value greater or lower than the one, required by the instability range, such wave excitation cannot be sustained and the process of electron energization (acceleration and/or heating) ceases. Hence, the electrons can propagate further in the corona and be detected as type III radio burst, for example. II. Electron acceleration due to attached whistler waves in the upstream region of coronal shocks (the electron--whistler--shock interaction) Coronal shocks are also able to accelerate electrons, as observed by the so-called type II metric radio bursts (the radio signature of a shock wave in the corona). From in-situ observations in space, e.g., at shocks related to co-rotating interaction regions, it is known that nonthermal electrons are produced preferably at shocks with attached whistler wave packets in their upstream regions. Motivated by these observations and assuming that the physical processes at shocks are the same in the corona as in the interplanetary medium, a new model of electron acceleration at coronal shocks is presented in the dissertation, where the electrons are accelerated by their interaction with such whistlers. The protons inflowing toward the shock are reflected there by nearly conserving their magnetic moment, so that they get a substantial velocity gain in the case of a quasi-perpendicular shock geometry, i.e, the angle between the shock normal and the upstream magnetic field is in the range 50--80 degrees. The so-accelerated protons are able to excite whistler waves in a certain frequency range in the upstream region. When these whistlers (comprising the localized wave structure in this case) are formed, only the incoming electrons are now able to interact resonantly with them. But only a part of these electrons fulfill the the electron--whistler wave resonance condition. Due to such resonant interaction (i.e., of these electrons with the whistlers), the electrons are accelerated in the electric and magnetic wave field within just several whistler periods. While gaining energy from the whistler wave field, the electrons reach the shock front and, subsequently, a major part of them are reflected back into the upstream region, since the shock accompanied with a jump of the magnetic field acts as a magnetic mirror. Co-moving with the whistlers now, the reflected electrons are out of resonance and hence can propagate undisturbed into the far upstream region, where they are detected in terms of type II metric radio bursts. In summary, the kinetic energy of protons is transfered into electrons by the action of localized wave structures in both cases, i.e., at jets outflowing from the magnetic reconnection site and at shock waves in the corona.}, language = {en} } @phdthesis{Schutjajew2021, author = {Schutjajew, Konstantin}, title = {Electrochemical sodium storage in non-graphitizing carbons - insights into mechanisms and synthetic approaches towards high-energy density materials}, doi = {10.25932/publishup-54189}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-541894}, school = {Universit{\"a}t Potsdam}, pages = {v, 148}, year = {2021}, abstract = {To achieve a sustainable energy economy, it is necessary to turn back on the combustion of fossil fuels as a means of energy production and switch to renewable sources. However, their temporal availability does not match societal consumption needs, meaning that renewably generated energy must be stored in its main generation times and allocated during peak consumption periods. Electrochemical energy storage (EES) in general is well suited due to its infrastructural independence and scalability. The lithium ion battery (LIB) takes a special place, among EES systems due to its energy density and efficiency, but the scarcity and uneven geological occurrence of minerals and ores vital for many cell components, and hence the high and fluctuating costs will decelerate its further distribution. The sodium ion battery (SIB) is a promising successor to LIB technology, as the fundamental setup and cell chemistry is similar in the two systems. Yet, the most widespread negative electrode material in LIBs, graphite, cannot be used in SIBs, as it cannot store sufficient amounts of sodium at reasonable potentials. Hence, another carbon allotrope, non-graphitizing or hard carbon (HC) is used in SIBs. This material consists of turbostratically disordered, curved graphene layers, forming regions of graphitic stacking and zones of deviating layers, so-called internal or closed pores. The structural features of HC have a substantial impact of the charge-potential curve exhibited by the carbon when it is used as the negative electrode in an SIB. At defects and edges an adsorption-like mechanism of sodium storage is prevalent, causing a sloping voltage curve, ill-suited for the practical application in SIBs, whereas a constant voltage plateau of relatively high capacities is found immediately after the sloping region, which recent research attributed to the deposition of quasimetallic sodium into the closed pores of HC. Literature on the general mechanism of sodium storage in HCs and especially the role of the closed pore is abundant, but the influence of the pore geometry and chemical nature of the HC on the low-potential sodium deposition is yet in an early stage. Therefore, the scope of this thesis is to investigate these relationships using suitable synthetic and characterization methods. Materials of precisely known morphology, porosity, and chemical structure are prepared in clear distinction to commonly obtained ones and their impact on the sodium storage characteristics is observed. Electrochemical impedance spectroscopy in combination with distribution of relaxation times analysis is further established as a technique to study the sodium storage process, in addition to classical direct current techniques, and an equivalent circuit model is proposed to qualitatively describe the HC sodiation mechanism, based on the recorded data. The obtained knowledge is used to develop a method for the preparation of closed porous and non-porous materials from open porous ones, proving not only the necessity of closed pores for efficient sodium storage, but also providing a method for effective pore closure and hence the increase of the sodium storage capacity and efficiency of carbon materials. The insights obtained and methods developed within this work hence not only contribute to the better understanding of the sodium storage mechanism in carbon materials of SIBs, but can also serve as guidance for the design of efficient electrode materials.}, language = {en} } @phdthesis{Kluth2012, author = {Kluth, Oliver}, title = {Einfluss von Glucolipotoxizit{\"a}t auf die Funktion der β-Zellen diabetessuszeptibler und -resistenter Mausst{\"a}mme}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-61961}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {Ziel der vorliegenden Arbeit war es, die Auswirkungen von Glucose- und Lipidtoxizit{\"a}t auf die Funktion der β-Zellen von Langerhans-Inseln in einem diabetesresistenten (B6.V-Lepob/ob, ob/ob) sowie diabetessuszeptiblen (New Zealand Obese, NZO) Mausmodell zu untersuchen. Es sollten molekulare Mechanismen identifiziert werden, die zum Untergang der β-Zellen in der NZO-Maus f{\"u}hren bzw. zum Schutz der β-Zellen der ob/ob-Maus beitragen. Zun{\"a}chst wurde durch ein geeignetes di{\"a}tetisches Regime in beiden Modellen durch kohlenhydratrestriktive Ern{\"a}hrung eine Adipositas(Lipidtoxizit{\"a}t) induziert und anschließend durch F{\"u}tterung einer kohlenhydrathaltigen Di{\"a}t ein Zustand von Glucolipotoxizit{\"a}t erzeugt. Dieses Vorgehen erlaubte es, in der NZO-Maus in einem kurzen Zeitfenster eine Hyperglyk{\"a}mie sowie einen β-Zelluntergang durch Apoptose auszul{\"o}sen. Im Vergleich dazu blieben ob/ob-M{\"a}use l{\"a}ngerfristig normoglyk{\"a}misch und wiesen keinen β-Zelluntergang auf. Die Ursache f{\"u}r den β-Zellverlust war die Inaktivierung des Insulin/IGF-1-Rezeptor-Signalwegs, wie durch Abnahme von phospho-AKT, phospho-FoxO1 sowie des β-zellspezifischen Transkriptionsfaktors PDX1 gezeigt wurde. Mit Ausnahme des Effekts einer Dephosphorylierung von FoxO1, konnten ob/ob-M{\"a}use diesen Signalweg aufrechterhalten und dadurch einen Verlust von β-Zellen abwenden. Die glucolipotoxischen Effekte wurden in vitro an isolierten Inseln beider St{\"a}mme und der β-Zelllinie MIN6 best{\"a}tigt und zeigten, dass ausschließlich die Kombination hoher Glucose und Palmitatkonzentrationen (Glucolipotoxizit{\"a}t) negative Auswirkungen auf die NZO-Inseln und MIN6-Zellen hatte, w{\"a}hrend ob/ob-Inseln davor gesch{\"u}tzt blieben. Die Untersuchung isolierter Inseln ergab, dass beide St{\"a}mme unter glucolipotoxischen Bedingungen keine Steigerung der Insulinexpression aufweisen und sich bez{\"u}glich ihrer Glucose-stimulierten Insulinsekretion nicht unterscheiden. Mit Hilfe von Microarray- sowie immunhistologischen Untersuchungen wurde gezeigt, dass ausschließlich ob/ob-M{\"a}use nach Kohlenhydratf{\"u}tterung eine kompensatorische transiente Induktion der β-Zellproliferation aufwiesen, die in einer nahezu Verdreifachung der Inselmasse nach 32 Tagen m{\"u}ndete. Die hier erzielten Ergebnisse lassen die Schlussfolgerung zu, dass der β-Zelluntergang der NZO-Maus auf eine Beeintr{\"a}chtigung des Insulin/IGF-1-Rezeptor-Signalwegs sowie auf die Unf{\"a}higkeit zur β- Zellproliferation zur{\"u}ckgef{\"u}hrt werden kann. Umgekehrt erm{\"o}glichen der Erhalt des Insulin/IGF-1-Rezeptor-Signalwegs und die Induktion der β-Zellproliferation in der ob/ob-Maus den Schutz vor einer Hyperglyk{\"a}mie und einem Diabetes.}, language = {de} } @phdthesis{Kugel2005, author = {Kugel, Rudolf}, title = {Ein Beitrag zur Problematik der Integration virtueller Maschinen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7195}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {Moderne Softwaresysteme sind komplexe Gebilde, welche h{\"a}ufig im Verbund mit anderen technischen und betriebswirtschaftlichen Systemen eingesetzt werden. F{\"u}r die Hersteller solcher Systeme stellt es oft eine große Herausforderung dar, den oft weit reichenden Anforderungen bez{\"u}glich der Anpassbarkeit solcher Systeme gerecht zu werden. Zur Erf{\"u}llung dieser Anforderungen hat es sich vielfach bew{\"a}hrt, eine virtuelle Maschine in das betreffende System zu integrieren. Die Dissertation richtet sich insbesondere an Personen, die vor der Aufgabe der Integration virtueller Maschinen in bestehende Systeme stehen und zielt darauf ab, solche f{\"u}r die Entscheidung {\"u}ber Integrationsfragen wichtigen Zusammenh{\"a}nge klar darzustellen. Typischerweise treten bei der Integration einer virtuellen Maschine in ein System eine Reihe unterschiedlicher Problemstellungen auf. Da diese Problemstellungen oft eng miteinander verzahnt sind, ist eine isolierte Betrachtung meist nicht sinnvoll. Daher werden die Problemstellungen anhand eines zentral gew{\"a}hlten, sehr umfangreichen Beispiels aus der industriellen Praxis eingef{\"u}hrt. Dieses Beispiel hat die Integration der "Java Virtual Machine" in den SAP R/3 Application Server zum Gegenstand. Im Anschluss an dieses Praxisbeispiel wird die Diskussion der Integrationsproblematik unter Bezug auf eine Auswahl weiterer, in der Literatur beschriebener Integrationsbeispiele vertieft. Das Hauptproblem bei der Behandlung der Integrationsproblematik bestand darin, dass die vorgefundenen Beschreibungen, der als Beispiel herangezogenen Systeme, nur bedingt als Basis f{\"u}r die Auseinandersetzung mit der Integrationsproblematik geeignet waren. Zur Schaffung einer verwertbaren Diskussionsgrundlage war es daher erforderlich, eine homogene, durchg{\"a}ngige Modellierung dieser Systeme vorzunehmen. Die Modellierung der Systeme erfolgte dabei unter Verwendung der "Fundamental Modeling Concepts (FMC)". Die erstellten Modelle sowie die auf Basis dieser Modelle durchgef{\"u}hrte Gegen{\"u}berstellung der unterschiedlichen Ans{\"a}tze zur L{\"O}sung typischer Integrationsprobleme bilden den Hauptbeitrag der Dissertation. Im Zusammenhang mit der Integration virtueller Maschinen in bestehende Systeme besteht h{\"a}ufig der Bedarf, zeitgleich mehrere "Programme" durch die integrierte virtuelle Maschine ausf{\"u}hren zu lassen. Angesichts der Konstruktionsmerkmale vieler heute verbreiteter virtueller Maschinen stellt die Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" eine große Herausforderung dar. Die Darstellung des Spektrums an Maßnahmen zur Realisierung eines "betriebsmittelschonenden Mehrprogrammbetriebs" bildet einen zweiten wesentlichen Beitrag der Dissertation.}, subject = {Virtuelle Maschine}, language = {de} } @phdthesis{Herbrich2017, author = {Herbrich, Marcus}, title = {Einfluss der erosionsbedingten Pedogenese auf den Wasserund Stoffhaushalt ackerbaulich genutzter B{\"o}den der Grundmor{\"a}nenbodenlandschaft NO-Deutschlands - hydropedologische Untersuchungen mittels w{\"a}gbarer Pr{\"a}zisionslysimeter}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-408561}, school = {Universit{\"a}t Potsdam}, pages = {186}, year = {2017}, abstract = {In the arable soil landscape of hummocky ground moraines, an erosion-affected spatial differentiation of soils can be observed. Man-made erosion leads to soil profile modifications along slopes with changed solum thickness and modified properties of soil horizons due to water erosion in combination with tillage operations. Soil erosion creates, thereby, spatial patterns of soil properties (e.g., texture and organic matter content) and differences in crop development. However, little is known about the manner in which water fluxes are affected by soil-crop interactions depending on contrasting properties of differently-developed soil horizons and how water fluxes influence the carbon transport in an eroded landscape. To identify such feedbacks between erosion-induced soil profile modifications and the 1D-water and solute balance, high-precision weighing lysimeters equipped with a wide range of sensor technique were filled with undisturbed soil monoliths that differed in the degree of past soil erosion. Furthermore, lysimeter effluent concentrations were analyzed for dissolved carbon fractions in bi-weekly intervals. The water balance components measured by high precision lysimeters varied from the most eroded to the less eroded monolith up to 83 \% (deep drainage) primarily caused due to varying amounts of precipitation and evapotranspiration for a 3-years period. Here, interactions between crop development and contrasting rainfall interception by above ground biomass could explain differences in water balance components. Concentrations of dissolved carbon in soil water samples were relatively constant in time, suggesting carbon leaching was mainly affected by water fluxes in this observation period. For the lysimeter-based water balance analysis, a filtering scheme was developed considering temporal autocorrelation. The minute-based autocorrelation analysis of mass changes from lysimeter time series revealed characteristic autocorrelation lengths ranging from 23 to 76 minutes. Thereby, temporal autocorrelation provided an optimal approximation of precipitation quantities. However, the high temporal resolution in lysimeter time series is restricted by the lengths of autocorrelation. Erosion-induced but also gradual changes in soil properties were reflected by dynamics of soil water retention properties in the lysimeter soils. Short-term and long-term hysteretic water retention data suggested seasonal wettability problems of soils increasingly limited rewetting of previously dried pore regions. Differences in water retention were assigned to soil tillage operations and the erosion history at different slope positions. The threedimensional spatial pattern of soil types that result from erosional soil profile modifications were also reflected in differences of crop root development at different landscape positions. Contrasting root densities revealed positive relations of root and aboveground plant characteristics. Differences in the spatially-distributed root growth between different eroded soil types provided indications that root development was affected by the erosion-induced soil evolution processes. Overall, the current thesis corroborated the hypothesis that erosion-induced soil profile modifications affect the soil water balance, carbon leaching and soil hydraulic properties, but also the crop root system is influenced by erosion-induced spatial patterns of soil properties in the arable hummocky post glacial soil landscape. The results will help to improve model predictions of water and solute movement in arable soils and to understand interactions between soil erosion and carbon pathways regarding sink-or-source terms in landscapes.}, language = {en} } @phdthesis{Sietz2011, author = {Sietz, Diana}, title = {Dryland vulnerability : typical patterns and dynamics in support of vulnerability reduction efforts}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-58097}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {The pronounced constraints on ecosystem functioning and human livelihoods in drylands are frequently exacerbated by natural and socio-economic stresses, including weather extremes and inequitable trade conditions. Therefore, a better understanding of the relation between these stresses and the socio-ecological systems is important for advancing dryland development. The concept of vulnerability as applied in this dissertation describes this relation as encompassing the exposure to climate, market and other stresses as well as the sensitivity of the systems to these stresses and their capacity to adapt. With regard to the interest in improving environmental and living conditions in drylands, this dissertation aims at a meaningful generalisation of heterogeneous vulnerability situations. A pattern recognition approach based on clustering revealed typical vulnerability-creating mechanisms at global and local scales. One study presents the first analysis of dryland vulnerability with global coverage at a sub-national resolution. The cluster analysis resulted in seven typical patterns of vulnerability according to quantitative indication of poverty, water stress, soil degradation, natural agro-constraints and isolation. Independent case studies served to validate the identified patterns and to prove the transferability of vulnerability-reducing approaches. Due to their worldwide coverage, the global results allow the evaluation of a specific system's vulnerability in its wider context, even in poorly-documented areas. Moreover, climate vulnerability of smallholders was investigated with regard to their food security in the Peruvian Altiplano. Four typical groups of households were identified in this local dryland context using indicators for harvest failure risk, agricultural resources, education and non-agricultural income. An elaborate validation relying on independently acquired information demonstrated the clear correlation between weather-related damages and the identified clusters. It also showed that household-specific causes of vulnerability were consistent with the mechanisms implied by the corresponding patterns. The synthesis of the local study provides valuable insights into the tailoring of interventions that reflect the heterogeneity within the social group of smallholders. The conditions necessary to identify typical vulnerability patterns were summarised in five methodological steps. They aim to motivate and to facilitate the application of the selected pattern recognition approach in future vulnerability analyses. The five steps outline the elicitation of relevant cause-effect hypotheses and the quantitative indication of mechanisms as well as an evaluation of robustness, a validation and a ranking of the identified patterns. The precise definition of the hypotheses is essential to appropriately quantify the basic processes as well as to consistently interpret, validate and rank the clusters. In particular, the five steps reflect scale-dependent opportunities, such as the outcome-oriented aspect of validation in the local study. Furthermore, the clusters identified in Northeast Brazil were assessed in the light of important endogenous processes in the smallholder systems which dominate this region. In order to capture these processes, a qualitative dynamic model was developed using generalised rules of labour allocation, yield extraction, budget constitution and the dynamics of natural and technological resources. The model resulted in a cyclic trajectory encompassing four states with differing degree of criticality. The joint assessment revealed aggravating conditions in major parts of the study region due to the overuse of natural resources and the potential for impoverishment. The changes in vulnerability-creating mechanisms identified in Northeast Brazil are well-suited to informing local adjustments to large-scale intervention programmes, such as "Avan{\c{c}}a Brasil". Overall, the categorisation of a limited number of typical patterns and dynamics presents an efficient approach to improving our understanding of dryland vulnerability. Appropriate decision-making for sustainable dryland development through vulnerability reduction can be significantly enhanced by pattern-specific entry points combined with insights into changing hotspots of vulnerability and the transferability of successful adaptation strategies.}, language = {en} } @phdthesis{Moerbt2010, author = {M{\"o}rbt, Nora}, title = {Differential proteome analysis of human lung epithelial cells following exposure to aromatic volatile organic compounds}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-49257}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {The widespread usage of products containing volatile organic compounds (VOC) has lead to a general human exposure to these chemicals in work places or homes being suspected to contribute to the growing incidence of environmental diseases. Since the causal molecular mechanisms for the development of these disorders are not completely understood, the overall objective of this thesis was to investigate VOC-mediated molecular effects on human lung cells in vitro at VOC concentrations comparable to exposure scenarios below current occupational limits. Although differential expression of single proteins in response to VOCs has been reported, effects on complex protein networks (proteome) have not been investigated. However, this information is indispensable when trying to ascertain a mechanism for VOC action on the cellular level and establishing preventive strategies. For this study, the alveolar epithelial cell line A549 has been used. This cell line, cultured in a two-phase (air/liquid) model allows the most direct exposure and had been successfully applied for the analysis of inflammatory effects in response to VOCs. Mass spectrometric identification of 266 protein spots provided the first proteomic map of A549 cell line to this extent that may foster future work with this frequently used cellular model. The distribution of three typical air contaminants, monochlorobenzene (CB), styrene and 1,2 dichlorobenzene (1,2-DCB), between gas and liquid phase of the exposure model has been analyzed by gas chromatography. The obtained VOC partitioning was in agreement with available literature data. Subsequently the adapted in vitro system has been successfully employed to characterize the effects of the aromatic compound styrene on the proteome of A549 cells (Chapter 4). Initially, the cell toxicity has been assessed in order to ensure that most of the concentrations used in the following proteomic approach were not cytotoxic. Significant changes in abundance and phosphorylation in the total soluble protein fraction of A549 cells have been detected following styrene exposure. All proteins have been identified using mass spectrometry and the main cellular functions have been assigned. Validation experiments on protein and transcript level confirmed the results of the 2-DE experiments. From the results, two main cellular pathways have been identified that were induced by styrene: the cellular oxidative stress response combined with moderate pro-apoptotic signaling. Measurement of cellular reactive oxygen species (ROS) as well as the styrene-mediated induction of oxidative stress marker proteins confirmed the hypothesis of oxidative stress as the main molecular response mechanism. Finally, adducts of cellular proteins with the reactive styrene metabolite styrene 7,8 oxide (SO) have been identified. Especially the SO-adducts observed at both the reactive centers of thioredoxin reductase 1, which is a key element in the control of the cellular redox state, may be involved in styrene-induced ROS formation and apoptosis. A similar proteomic approach has been carried out with the halobenzenes CB and 1,2-DCB (Chapter 5). In accordance with previous findings, cell toxicity assessment showed enhanced toxicity compared to the one caused by styrene. Significant changes in abundance and phosphorylation of total soluble proteins of A549 cells have been detected following exposure to subtoxic concentrations of CB and 1,2-DCB. All proteins have been identified using mass spectrometry and the main cellular functions have been assigned. As for the styrene experiment, the results indicated two main pathways to be affected in the presence of chlorinated benzenes, cell death signaling and oxidative stress response. The strong induction of pro-apoptotic signaling has been confirmed for both treatments by detection of the cleavage of caspase 3. Likewise, the induction of redox-sensitive protein species could be correlated to an increased cellular level of ROS observed following CB treatment. Finally, common mechanisms in the cellular response to aromatic VOCs have been investigated (Chapter 6). A similar number (4.6-6.9\%) of all quantified protein spots showed differential expression (p<0.05) following cell exposure to styrene, CB or 1,2-DCB. However, not more than three protein spots showed significant regulation in the same direction for all three volatile compounds: voltage-dependent anion-selective channel protein 2, peroxiredoxin 1 and elongation factor 2. However, all of these proteins are important molecular targets in stress- and cell death-related signaling pathways.}, language = {en} } @phdthesis{Berger2012, author = {Berger, Florian}, title = {Different modes of cooperative transport by molecular motors}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60319}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {Cargo transport by molecular motors is ubiquitous in all eukaryotic cells and is typically driven cooperatively by several molecular motors, which may belong to one or several motor species like kinesin, dynein or myosin. These motor proteins transport cargos such as RNAs, protein complexes or organelles along filaments, from which they unbind after a finite run length. Understanding how these motors interact and how their movements are coordinated and regulated is a central and challenging problem in studies of intracellular transport. In this thesis, we describe a general theoretical framework for the analysis of such transport processes, which enables us to explain the behavior of intracellular cargos based on the transport properties of individual motors and their interactions. Motivated by recent in vitro experiments, we address two different modes of transport: unidirectional transport by two identical motors and cooperative transport by actively walking and passively diffusing motors. The case of cargo transport by two identical motors involves an elastic coupling between the motors that can reduce the motors' velocity and/or the binding time to the filament. We show that this elastic coupling leads, in general, to four distinct transport regimes. In addition to a weak coupling regime, kinesin and dynein motors are found to exhibit a strong coupling and an enhanced unbinding regime, whereas myosin motors are predicted to attain a reduced velocity regime. All of these regimes, which we derive both by analytical calculations and by general time scale arguments, can be explored experimentally by varying the elastic coupling strength. In addition, using the time scale arguments, we explain why previous studies came to different conclusions about the effect and relevance of motor-motor interference. In this way, our theory provides a general and unifying framework for understanding the dynamical behavior of two elastically coupled molecular motors. The second mode of transport studied in this thesis is cargo transport by actively pulling and passively diffusing motors. Although these passive motors do not participate in active transport, they strongly enhance the overall cargo run length. When an active motor unbinds, the cargo is still tethered to the filament by the passive motors, giving the unbound motor the chance to rebind and continue its active walk. We develop a stochastic description for such cooperative behavior and explicitly derive the enhanced run length for a cargo transported by one actively pulling and one passively diffusing motor. We generalize our description to the case of several pulling and diffusing motors and find an exponential increase of the run length with the number of involved motors.}, language = {en} } @phdthesis{Frenzel2015, author = {Frenzel, Sabine}, title = {Die Rolle der Umamirezeptoruntereinheit Tas1r1 jenseits ihrer gustatorischen Bedeutung}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-79502}, school = {Universit{\"a}t Potsdam}, pages = {XV, 172}, year = {2015}, abstract = {Aminos{\"a}uren sind lebensnotwendige Molek{\"u}le f{\"u}r alle Organismen. Ihre Erkennung im K{\"o}rper erm{\"o}glicht eine bedarfsgerechte Regulation ihrer Aufnahme und ihrer Verwertung. Welcher Chemosensor f{\"u}r diese Erkennung jedoch hauptverantwortlich ist, ist bisher unklar. In der vorliegenden Arbeit wurde die Rolle der Umamigeschmacksrezeptoruntereinheit Tas1r1 jenseits ihrer gustatorischen Bedeutung f{\"u}r die Aminos{\"a}uredetektion in der Mundh{\"o}hle untersucht. In der histologischen Tas1r1-Expressionsanalyse nichtgustatorischer Gewebe der Mauslinie Tas1r1-Cre/ROSA26-tdRFP wurde {\"u}ber die Detektion des Reporterproteins tdRFP die Expression des Tas1r1 in allen untersuchten Geweben (Speiser{\"o}hre, Magen, Darm, Bauchspeicheldr{\"u}se, Leber, Niere, Muskel- und Fettgewebe, Milz, Thymus, Lymphknoten, Lunge sowie Hoden) nachgewiesen. Mit Ausnahme von D{\"u}nndarm und Hoden gelang hierbei der Nachweis erstmals spezifisch auf zellul{\"a}rer Ebene. Caecum und Lymphknoten wurden zudem neu als Expressionsorte des Tas1r1 identifiziert. Trotz der beobachteten weiten Verbreitung des Tas1r1 im Organismus - unter anderem auch in Geweben, die f{\"u}r den Proteinstoffwechsel besonders relevant sind - waren im Zuge der durchgef{\"u}hrten Untersuchung potentieller extraoraler Funktionen des Rezeptors durch ph{\"a}notypische Charakterisierung der Mauslinie Tas1r1-BLiR nur schwache Auswirkungen auf Aminos{\"a}urestoffwechsel bzw. Stickstoffhaushalt im Falle eines Tas1r1-Knockouts detektierbar. W{\"a}hrend sich Ern{\"a}hrungsverhalten, Gesamtphysiologie, Gewebemorphologie sowie Futterverdaulichkeit unver{\"a}ndert zeigten, war die renale Stickstoffausscheidung bei Tas1r1-Knockout-M{\"a}usen auf eiweißarmer sowie auf eiweißreicher Di{\"a}t signifikant verringert. Eine {\"U}berdeckung der Auswirkungen des Tas1r1-Knockouts aufgrund kompensatorischer Effekte durch den Aminos{\"a}uresensor CaSR oder den Peptidsensor Gpr93 war nicht nachweisbar. Es bleibt offen, ob andere Mechanismen oder andere Chemosensoren an einer Kompensation beteiligt sind oder aber Tas1r1 in extraoralem Gewebe andere Funktionen als die der Aminos{\"a}uredetektion {\"u}bernimmt. Unterschiede im extraoralen Expressionsmuster der beiden Umamirezeptor-untereinheiten Tas1r1 und Tasr3 lassen Spekulationen {\"u}ber andere Partner, Liganden und Funktionen zu.}, language = {de} } @phdthesis{Nerlich2007, author = {Nerlich, Annika}, title = {Die Rolle der Phosphatidylserin Decarboxylase f{\"u}r die mitochondriale Phospholipid-Biosynthese in Arabidopsis thaliana}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-14522}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {Die durch Phosphatidylserin Decarboxylase (PSD) katalysierte Decarboxylierung von Phosphatidylserin (PS) zu Phosphatidylethanolamin (PE) ist f{\"u}r Mitochondrien in Hefe und M{\"a}usen von essentieller Bedeutung. Im Rahmen der vorliegenden Dissertation wurde erstmals die Rolle dieses PE-Syntheseweges in Pflanzen untersucht. Die drei in Arabidopsis identifizierten PSD Gene atPSD1, atPSD2, atPSD3 codieren f{\"u}r Enzyme, die in Membranen der Mitochondrien (atPSD1), der Tonoplasten (atPSD2) und des Endoplasmatischen Retikulums (atPSD3) lokalisiert sind. Der Beitrag der einzelnen PSDs zur PE-Synthese wurde anhand von psd Null-Mutanten untersucht. Dabei stellte sich atPSD3 als das Enzym mit der h{\"o}chsten Aktivit{\"a}t heraus. Alternativ zum PSD-Weg wird in Arabidopsis PE auch mittels Aminoalkohol-phosphotransferase synthetisiert. Der Verlust der gesamten PSD-Aktivit{\"a}t, wie es in der erzeugten psd Dreifachmutante der Fall ist, wirkt sich ausschließlich auf die Lipidzusammensetzung in der Mitochondrienmembran aus. Demzufolge wird extramitochondriales PE haupts{\"a}chlich {\"u}ber die Aminoalkoholphosphotransferase synthetisiert. Die ver{\"a}nderte Lipidzusammensetzung der Mitochondrienmembran hatte jedoch keinen Einfluss auf die Anzahl, Gr{\"o}ße und Ultrastruktur der Mitochondrien sowie auf das ADP/ATP-Verh{\"a}ltnis und die Respiration. Neben der Bereitstellung von Reduktions{\"a}quivalenten beeinflusst die Funktionalit{\"a}t der Mitochondrien auch die Bildung von Bl{\"u}ten- und Staubbl{\"a}ttern. Diese Bl{\"u}tenorgane waren in der psd Dreifachmutante stark ver{\"a}ndert, und der Bl{\"u}tenph{\"a}notyp {\"a}hnelte der APETALA3-Mutante. Dieses hom{\"o}otische Gen ist f{\"u}r die Ausbildung von Bl{\"u}ten- und Staubbl{\"a}ttern verantwortlich. F{\"u}r die Erzeugung der Mutanten psd2-1 und psd3-1 wurde ein T-DNA Vektor verwendet, der den Promotor des APETALA3 Gens enthielt, welcher in den Mutanten psd2-1, psd3-1 sowie psd2-1psd3-1 und der psd1psd2-1psd3-1 Dreifachmutante eine vergleichbare Co-Suppression des APETALA3 Gens hervorruft. Der Bl{\"u}tenph{\"a}notyp trat jedoch nur in der psd Dreifachmutante auf, da nur in ihr die Kombination von geringen Funktionst{\"o}rungen der Mitochondrien, hervorgerufen durch ver{\"a}nderte Lipidzusammensetzung, mit der Co-Suppression von APETALA3 auftritt.}, language = {de} } @phdthesis{Rust2007, author = {Rust, Henning}, title = {Detection of long-range dependence : applications in climatology and hydrology}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13347}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {It is desirable to reduce the potential threats that result from the variability of nature, such as droughts or heat waves that lead to food shortage, or the other extreme, floods that lead to severe damage. To prevent such catastrophic events, it is necessary to understand, and to be capable of characterising, nature's variability. Typically one aims to describe the underlying dynamics of geophysical records with differential equations. There are, however, situations where this does not support the objectives, or is not feasible, e.g., when little is known about the system, or it is too complex for the model parameters to be identified. In such situations it is beneficial to regard certain influences as random, and describe them with stochastic processes. In this thesis I focus on such a description with linear stochastic processes of the FARIMA type and concentrate on the detection of long-range dependence. Long-range dependent processes show an algebraic (i.e. slow) decay of the autocorrelation function. Detection of the latter is important with respect to, e.g. trend tests and uncertainty analysis. Aiming to provide a reliable and powerful strategy for the detection of long-range dependence, I suggest a way of addressing the problem which is somewhat different from standard approaches. Commonly used methods are based either on investigating the asymptotic behaviour (e.g., log-periodogram regression), or on finding a suitable potentially long-range dependent model (e.g., FARIMA[p,d,q]) and test the fractional difference parameter d for compatibility with zero. Here, I suggest to rephrase the problem as a model selection task, i.e.comparing the most suitable long-range dependent and the most suitable short-range dependent model. Approaching the task this way requires a) a suitable class of long-range and short-range dependent models along with suitable means for parameter estimation and b) a reliable model selection strategy, capable of discriminating also non-nested models. With the flexible FARIMA model class together with the Whittle estimator the first requirement is fulfilled. Standard model selection strategies, e.g., the likelihood-ratio test, is for a comparison of non-nested models frequently not powerful enough. Thus, I suggest to extend this strategy with a simulation based model selection approach suitable for such a direct comparison. The approach follows the procedure of a statistical test, with the likelihood-ratio as the test statistic. Its distribution is obtained via simulations using the two models under consideration. For two simple models and different parameter values, I investigate the reliability of p-value and power estimates obtained from the simulated distributions. The result turned out to be dependent on the model parameters. However, in many cases the estimates allow an adequate model selection to be established. An important feature of this approach is that it immediately reveals the ability or inability to discriminate between the two models under consideration. Two applications, a trend detection problem in temperature records and an uncertainty analysis for flood return level estimation, accentuate the importance of having reliable methods at hand for the detection of long-range dependence. In the case of trend detection, falsely concluding long-range dependence implies an underestimation of a trend and possibly leads to a delay of measures needed to take in order to counteract the trend. Ignoring long-range dependence, although present, leads to an underestimation of confidence intervals and thus to an unjustified belief in safety, as it is the case for the return level uncertainty analysis. A reliable detection of long-range dependence is thus highly relevant in practical applications. Examples related to extreme value analysis are not limited to hydrological applications. The increased uncertainty of return level estimates is a potentially problem for all records from autocorrelated processes, an interesting examples in this respect is the assessment of the maximum strength of wind gusts, which is important for designing wind turbines. The detection of long-range dependence is also a relevant problem in the exploration of financial market volatility. With rephrasing the detection problem as a model selection task and suggesting refined methods for model comparison, this thesis contributes to the discussion on and development of methods for the detection of long-range dependence.}, language = {en} } @phdthesis{Fritz2006, author = {Fritz, Christina}, title = {Der Einfluß des prim{\"a}ren Stickstoffstoffwechsels auf den Aminos{\"a}ure- und Sekund{\"a}rstoffwechsel in Nicotiana tabacum L.}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13322}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {Es ist bekannt, dass {\"A}nderungen im Kohlenstoff- bzw. Stickstoffstaus der Pflanzen zu einer parallelen statt reziproken {\"A}nderung der kohlenstoff- und stickstoffhaltigen Prim{\"a}rmetabolite f{\"u}hren. Unter diesem Gesichtspunkt wurden in der vorliegenden Arbeit der Aminos{\"a}urestoffwechsel und der Sekund{\"a}rstoffwechsel unter reduzierten Stickstoffbedingungen untersucht. Zur Beeinflussung des Stickstoffstoffwechsels wurden nitratmangelern{\"a}hrte Tabakwildtyppflanzen und Genotypen mit unterschiedlich stark reduzierter Nitratreduktase-Aktivit{\"a}t verwendet. Dieses experimentelle System erlaubt zus{\"a}tzlich durch den Vergleich Nitrat defizienter Wildtyppflanzen mit Nitrat akkumulierenden NIA-Transformanten Prozesse zu identifizieren, die durch Nitrat gesteuert werden. Die Analysen der Prim{\"a}r- und Sekund{\"a}rmetabolite wurde in allen Genotypen diurnal durchgef{\"u}hrt, um auch tageszeitlich abh{\"a}ngige Prozesse zu identifizieren. Die Analyse der absoluten Gehalte aller individuellen Aminos{\"a}uren enth{\"u}llte bei den meisten erstaunlich stabile diurnale Muster mit einem Anstieg w{\"a}hrend des Tages und einem Abfall in der Nacht in Wildtyppflanzen gewachsen mit ausreichend Nitrat. Dieses Ergebnis legt die Schlussfolgerung nahe, dass die Biosynthese der Aminos{\"a}uren koordiniert abl{\"a}uft. In Pflanzen mit reduziertem Stickstoffstatus haben diese diurnalen Muster jedoch keinen Bestand. Die Kombination des erzeugten stickstoffbasierten Aminos{\"a}uredatensatz in Kombination mit einem bereits erzeugten Aminos{\"a}uredatensatz unter kohlenstofflimitierten Bedingungen von Matt et al. (2002) f{\"u}hrte durch Hauptkomponentenanalyse (PCA) und Korrelationsanalyse zu dem Ergebnis, dass die Hypothese nach einer koordinierten Aminos{\"a}urebiosynthese nicht allgemeine G{\"u}ltigkeit hat. Die PCA identifizierte Glutamin, Glutamat, Aspartat, Glycin, Pheny-lalanin und Threonin als Faktoren, die den Datens{\"a}tzen ihre charakteristische Eigenschaft und deren Varianz verleihen. Die Korrelationsanalyse zeigte, dass die sehr guten Korrelationen der individuellen Aminos{\"a}uren untereinander in reduzierten Stickstoff- und Kohlenstoffbedingungen sich verschlechtern. Das Verh{\"a}ltnis einer einzelnen Aminos{\"a}ure relativ zu den anderen f{\"u}hrte zur Identifizierung einiger Aminos{\"a}uren, die individuelle Antworten auf Stickstoff- und/oder Kohlenstoffstatus zeigen, und/oder speziell auf Nitrat, Licht und/oder den E-nergiestatus der Thylakoidmembran. Glutamat beispielsweise verh{\"a}lt sich in den meisten Situationen stabil, Phenylalanin dagegen zeigt in jeder physiologischen Situation eine individuelle Antwort. Die Ergebnisse dieser Arbeit f{\"u}hren zu einer Erweiterung der Hypothese einer koordinierten Synthese der Aminos{\"a}uren dahingehend, dass diese nicht generell f{\"u}r alle Aminos{\"a}uren angenommen werden kann. Es gibt einige Aminos{\"a}uren deren, Anteile sich situationsbedingt anpassen. Die Reduktion des Stickstoffstatus in nitratmangelern{\"a}hrten Tabakwildtyppflanzen f{\"u}hrte zu der, nach der „Carbon-Nutrient-Balance" Hypothese erwarteten Verlagerung der kohlenstoffreichen Phenylpropanoide und des stickstoffreichen Nikotins. Die Erh{\"o}hung der Phenylpropanoidgehalte war nicht in der Nitrat akkumulierenden NIA-Transformante zu beobachten und somit konnte Nitrat als regulatorisches Element identifiziert werden. Ein Einfluss der Vorl{\"a}ufermetabolite konnte ausgeschlossen werden, da sowohl nitratmangelern{\"a}hrter Wildtyp als auch die Nitrat akkumulierende NIA-Transformante {\"a}hnliche Gehalte dieser aufwiesen. Genexpressionsanalysen {\"u}ber Mikroarray-Hybridisierung und quantitative RT-PCR zeigten, dass Nitrat durch noch nicht gekl{\"a}rte Mechanismen Einfluss auf die Expression einiger Gene nimmt, die dem Phenylpropanoidstoffwechsels zugeordnet sind. Aus der Arbeit hervorgegangene Ver{\"o}ffentlichungen: Christina Fritz, Natalia Palacios-Rojas, Regina Feil und Mark Stitt (2006) Regulation of Secondary Metabolism by the Carbon-Nitrogen Status in Tobacco: Nitrate Inhibits Large Sectors of Phenylpropanoid Metabolism. Plant Journal 46, 533 - 548 Christina Fritz, Petra Matt, Cathrin M{\"u}ller, Regina Feil und Mark Stitt (2006) Impact of the Carbon-Nitrogen Status on the Amino Acid Profile in Tobacco Source Leaves. Plant, Cell and Environment 29 (11), 2009 - 2111}, language = {de} } @phdthesis{Aue2024, author = {Aue, Lars}, title = {Cyclone impacts on sea ice in the Atlantic Arctic Ocean}, doi = {10.25932/publishup-63445}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-634458}, school = {Universit{\"a}t Potsdam}, pages = {VIII, 131}, year = {2024}, abstract = {The Arctic is the hot spot of the ongoing, global climate change. Over the last decades, near-surface temperatures in the Arctic have been rising almost four times faster than on global average. This amplified warming of the Arctic and the associated rapid changes of its environment are largely influenced by interactions between individual components of the Arctic climate system. On daily to weekly time scales, storms can have major impacts on the Arctic sea-ice cover and are thus an important part of these interactions within the Arctic climate. The sea-ice impacts of storms are related to high wind speeds, which enhance the drift and deformation of sea ice, as well as to changes in the surface energy budget in association with air mass advection, which impact the seasonal sea-ice growth and melt. The occurrence of storms in the Arctic is typically associated with the passage of transient cyclones. Even though the above described mechanisms how storms/cyclones impact the Arctic sea ice are in principal known, there is a lack of statistical quantification of these effects. In accordance with that, the overarching objective of this thesis is to statistically quantify cyclone impacts on sea-ice concentration (SIC) in the Atlantic Arctic Ocean over the last four decades. In order to further advance the understanding of the related mechanisms, an additional objective is to separate dynamic and thermodynamic cyclone impacts on sea ice and assess their relative importance. Finally, this thesis aims to quantify recent changes in cyclone impacts on SIC. These research objectives are tackled utilizing various data sets, including atmospheric and oceanic reanalysis data as well as a coupled model simulation and a cyclone tracking algorithm. Results from this thesis demonstrate that cyclones are significantly impacting SIC in the Atlantic Arctic Ocean from autumn to spring, while there are mostly no significant impacts in summer. The strength and the sign (SIC decreasing or SIC increasing) of the cyclone impacts strongly depends on the considered daily time scale and the region of the Atlantic Arctic Ocean. Specifically, an initial decrease in SIC (day -3 to day 0 relative to the cyclone) is found in the Greenland, Barents and Kara Seas, while SIC increases following cyclones (day 0 to day 5 relative to the cyclone) are mostly limited to the Barents and Kara Seas. For the cold season, this results in a pronounced regional difference between overall (day -3 to day 5 relative to the cyclone) SIC-decreasing cyclone impacts in the Greenland Sea and overall SIC-increasing cyclone impacts in the Barents and Kara Seas. A cyclone case study based on a coupled model simulation indicates that both dynamic and thermodynamic mechanisms contribute to cyclone impacts on sea ice in winter. A typical pattern consisting of an initial dominance of dynamic sea-ice changes followed by enhanced thermodynamic ice growth after the cyclone passage was found. This enhanced ice growth after the cyclone passage most likely also explains the (statistical) overall SIC-increasing effects of cyclones in the Barents and Kara Seas in the cold season. Significant changes in cyclone impacts on SIC over the last four decades have emerged throughout the year. These recent changes are strongly varying from region to region and month to month. The strongest trends in cyclone impacts on SIC are found in autumn in the Barents and Kara Seas. Here, the magnitude of destructive cyclone impacts on SIC has approximately doubled over the last four decades. The SIC-increasing effects following the cyclone passage have particularly weakened in the Barents Sea in autumn. As a consequence, previously existing overall SIC-increasing cyclone impacts in this region in autumn have recently disappeared. Generally, results from this thesis show that changes in the state of the sea-ice cover (decrease in mean sea-ice concentration and thickness) and near-surface air temperature are most important for changed cyclone impacts on SIC, while changes in cyclone properties (i.e. intensity) do not play a significant role.}, language = {en} } @phdthesis{Richter2022, author = {Richter, Maximilian Jacob Enzo Amandus}, title = {Continental rift dynamics across the scales}, doi = {10.25932/publishup-55060}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-550606}, school = {Universit{\"a}t Potsdam}, pages = {129}, year = {2022}, abstract = {Localisation of deformation is a ubiquitous feature in continental rift dynamics and observed across drastically different time and length scales. This thesis comprises one experimental and two numerical modelling studies investigating strain localisation in (1) a ductile shear zone induced by a material heterogeneity and (2) in an active continental rift setting. The studies are related by the fact that the weakening mechanisms on the crystallographic and grain size scale enable bulk rock weakening, which fundamentally enables the formation of shear zones, continental rifts and hence plate tectonics. Aiming to investigate the controlling mechanisms on initiation and evolution of a shear zone, the torsion experiments of the experimental study were conducted in a Patterson type apparatus with strong Carrara marble cylinders with a weak, planar Solnhofen limestone inclusion. Using state-of-the-art numerical modelling software, the torsion experiments were simulated to answer questions regarding localisation procedure like stress distribution or the impact of rheological weakening. 2D numerical models were also employed to integrate geophysical and geological data to explain characteristic tectonic evolution of the Southern and Central Kenya Rift. Key elements of the numerical tools are a randomized initial strain distribution and the usage of strain softening. During the torsion experiments, deformation begins to localise at the limestone inclusion tips in a process zone, which propagates into the marble matrix with increasing deformation until a ductile shear zone is established. Minor indicators for coexisting brittle deformation are found close to the inclusion tip and presumed to slightly facilitate strain localisation besides the dominant ductile deformation processes. The 2D numerical model of the torsion experiment successfully predicts local stress concentration and strain rate amplification ahead of the inclusion in first order agreement with the experimental results. A simple linear parametrization of strain weaking enables high accuracy reproduction of phenomenological aspects of the observed weakening. The torsion experiments suggest that loading conditions do not affect strain localisation during high temperature deformation of multiphase material with high viscosity contrasts. A numerical simulation can provide a way of analysing the process zone evolution virtually and extend the examinable frame. Furthermore, the nested structure and anastomosing shape of an ultramylonite band was mimicked with an additional second softening step. Rheological weakening is necessary to establish a shear zone in a strong matrix around a weak inclusion and for ultramylonite formation. Such strain weakening laws are also incorporated into the numerical models of the Southern and Central Kenya Rift that capture the characteristic tectonic evolution. A three-stage early rift evolution is suggested that starts with (1) the accommodation of strain by a single border fault and flexure of the hanging-wall crust, after which (2) faulting in the hanging-wall and the basin centre increases before (3) the early-stage asymmetry is lost and basinward localisation of deformation occurs. Along-strike variability of rifts can be produced by modifying the initial random noise distribution. In summary, the three studies address selected aspects of the broad range of mechanisms and processes that fundamentally enable the deformation of rock and govern the localisation patterns across the scales. In addition to the aforementioned results, the first and second manuscripts combined, demonstrate a procedure to find new or improve on existing numerical formulations for specific rheologies and their dynamic weakening. These formulations are essential in addressing rock deformation from the grain to the global scale. As within the third study of this thesis, where geodynamic controls on the evolution of a rift were examined and acquired by the integration of geological and geophysical data into a numerical model.}, language = {en} }