@misc{FichteTruszczynskiWoltran2015,
author = {Fichte, Johannes Klaus and Truszczynski, Miroslaw and Woltran, Stefan},
title = {Dual-normal logic programs},
series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
number = {585},
issn = {1866-8372},
doi = {10.25932/publishup-41449},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414490},
pages = {16},
year = {2015},
abstract = {Disjunctive Answer Set Programming is a powerful declarative programming paradigm with complexity beyond NP. Identifying classes of programs for which the consistency problem is in NP is of interest from the theoretical standpoint and can potentially lead to improvements in the design of answer set programming solvers. One of such classes consists of dual-normal programs, where the number of positive body atoms in proper rules is at most one. Unlike other classes of programs, dual-normal programs have received little attention so far. In this paper we study this class. We relate dual-normal programs to propositional theories and to normal programs by presenting several inter-translations. With the translation from dual-normal to normal programs at hand, we introduce the novel class of body-cycle free programs, which are in many respects dual to head-cycle free programs. We establish the expressive power of dual-normal programs in terms of SE- and UE-models, and compare them to normal programs. We also discuss the complexity of deciding whether dual-normal programs are strongly and uniformly equivalent.},
language = {en}
}
@inproceedings{CurzonKalasSchubertetal.2015,
author = {Curzon, Paul and Kalas, Ivan and Schubert, Sigrid and Schaper, Niclas and Barnes, Jan and Kennewell, Steve and Br{\"o}ker, Kathrin and Kastens, Uwe and Magenheim, Johannes and Dagiene, Valentina and Stupuriene, Gabriele and Ellis, Jason Brent and Abreu-Ellis, Carla Reis and Grillenberger, Andreas and Romeike, Ralf and Haugsbakken, Halvdan and Jones, Anthony and Lewin, Cathy and McNicol, Sarah and Nelles, Wolfgang and Neugebauer, Jonas and Ohrndorf, Laura and Schaper, Niclas and Schubert, Sigrid and Opel, Simone and Kramer, Matthias and Trommen, Michael and Pottb{\"a}cker, Florian and Ilaghef, Youssef and Passig, David and Tzuriel, David and Kedmi, Ganit Eshel and Saito, Toshinori and Webb, Mary and Weigend, Michael and Bottino, Rosa and Chioccariello, Augusto and Christensen, Rhonda and Knezek, Gerald and Gioko, Anthony Maina and Angondi, Enos Kiforo and Waga, Rosemary and Ohrndorf, Laura and Or-Bach, Rachel and Preston, Christina and Younie, Sarah and Przybylla, Mareen and Romeike, Ralf and Reynolds, Nicholas and Swainston, Andrew and Bendrups, Faye and Sysło, Maciej M. and Kwiatkowska, Anna Beata and Zieris, Holger and Gerstberger, Herbert and M{\"u}ller, Wolfgang and B{\"u}chner, Steffen and Opel, Simone and Schiller, Thomas and Wegner, Christian and Zender, Raphael and Lucke, Ulrike and Diethelm, Ira and Syrbe, J{\"o}rn and Lai, Kwok-Wing and Davis, Niki and Eickelmann, Birgit and Erstad, Ola and Fisser, Petra and Gibson, David and Khaddage, Ferial and Knezek, Gerald and Micheuz, Peter and Kloos, Carlos Delgado},
title = {KEYCIT 2014},
editor = {Brinda, Torsten and Reynolds, Nicholas and Romeike, Ralf and Schwill, Andreas},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-86956-292-6},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-70325},
pages = {438},
year = {2015},
abstract = {In our rapidly changing world it is increasingly important not only to be an expert in a chosen field of study but also to be able to respond to developments, master new approaches to solving problems, and fulfil changing requirements in the modern world and in the job market. In response to these needs key competencies in understanding, developing and using new digital technologies are being brought into focus in school and university programmes. The IFIP TC3 conference "KEYCIT - Key Competences in Informatics and ICT (KEYCIT 2014)" was held at the University of Potsdam in Germany from July 1st to 4th, 2014 and addressed the combination of key competencies, Informatics and ICT in detail. The conference was organized into strands focusing on secondary education, university education and teacher education (organized by IFIP WGs 3.1 and 3.3) and provided a forum to present and to discuss research, case studies, positions, and national perspectives in this field.},
language = {en}
}
@inproceedings{RolfBergesHubwieseretal.2010,
author = {Rolf, Arno and Berges, Marc and Hubwieser, Peter and Kehrer, Timo and Kelter, Udo and Romeike, Ralf and Frenkel, Marcus and Karsten, Weicker and Reinhardt, Wolfgang and Mascher, Michael and G{\"u}l, Senol and Magenheim, Johannes and Raimer, Stephan and Diethelm, Ira and D{\"u}nnebier, Malte and Gabor, Kiss and Susanne, Boll and Rolf, Meinhardt and Gronewold, Sabine and Krekeler, Larissa and Jahnke, Isa and Haertel, Tobias and Mattick, Volker and Lettow, Karsten and Hafer, J{\"o}rg and Ludwig, Joachim and Schumann, Marlen and Laroque, Christoph and Schulte, Jonas and Urban, Diana},
title = {HDI2010 - Tagungsband der 4. Fachtagung zur "Hochschuldidaktik Informatik"},
editor = {Engbring, Dieter and Keil, Reinhard and Magenheim, Johannes and Selke, Harald},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-86956-100-4},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-49167},
pages = {105},
year = {2010},
abstract = {Mit der 4. Tagung zur Hochschuldidaktik Informatik wird eine Reihe fortgesetzt, die ihren Anfang 1998 in Stuttgart unter der {\"U}berschrift „Informatik und Ausbildung" genommen hat. Seither dienen diese Tagungen den Lehrenden im Bereich der Hochschulinformatik als Forum der Information und des Diskurses {\"u}ber aktuelle didaktische und bildungspolitische Entwicklungen im Bereich der Informatikausbildung. Aktuell z{\"a}hlen dazu insbesondere Fragen der Bildungsrelevanz informatischer Inhalte und der Herausforderung durch eine st{\"a}rkere Kompetenzorientierung in der Informatik. Die eingereichten Beitr{\"a}ge zur HDI 2010 in Paderborn veranschaulichen unterschiedliche Bem{\"u}hungen, sich mit relevanten Problemen der Informatikdidaktik an Hochschulen in Deutschland (und z. T. auch im Ausland) auseinanderzusetzen. Aus der Breite des Spektrums der Einreichungen ergaben sich zugleich Probleme bei der Begutachtung. Letztlich konnten von den zahlreichen Einreichungen nur drei die Gutachter so {\"u}berzeugen, dass sie uneingeschr{\"a}nkt in ihrer Langfassung akzeptiert wurden. Neun weitere Einreichungen waren trotz Kritik {\"u}berwiegend positiv begutachtet worden, so dass wir diese als Kurzfassung bzw. Diskussionspapier in die Tagung aufgenommen haben.},
language = {de}
}
@misc{ArvidssonKwasniewskiRianoPachonetal.2008,
author = {Arvidsson, Samuel Janne and Kwasniewski, Miroslaw and Ria{\~n}o- Pach{\´o}n, Diego Mauricio and Mueller-Roeber, Bernd},
title = {QuantPrime},
series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
number = {943},
issn = {1866-8372},
doi = {10.25932/publishup-43153},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-431531},
pages = {17},
year = {2008},
abstract = {Background Medium- to large-scale expression profiling using quantitative polymerase chain reaction (qPCR) assays are becoming increasingly important in genomics research. A major bottleneck in experiment preparation is the design of specific primer pairs, where researchers have to make several informed choices, often outside their area of expertise. Using currently available primer design tools, several interactive decisions have to be made, resulting in lengthy design processes with varying qualities of the assays. Results Here we present QuantPrime, an intuitive and user-friendly, fully automated tool for primer pair design in small- to large-scale qPCR analyses. QuantPrime can be used online through the internet http://www.quantprime.de/ or on a local computer after download; it offers design and specificity checking with highly customizable parameters and is ready to use with many publicly available transcriptomes of important higher eukaryotic model organisms and plant crops (currently 295 species in total), while benefiting from exon-intron border and alternative splice variant information in available genome annotations. Experimental results with the model plant Arabidopsis thaliana, the crop Hordeum vulgare and the model green alga Chlamydomonas reinhardtii show success rates of designed primer pairs exceeding 96\%. Conclusion QuantPrime constitutes a flexible, fully automated web application for reliable primer design for use in larger qPCR experiments, as proven by experimental data. The flexible framework is also open for simple use in other quantification applications, such as hydrolyzation probe design for qPCR and oligonucleotide probe design for quantitative in situ hybridization. Future suggestions made by users can be easily implemented, thus allowing QuantPrime to be developed into a broad-range platform for the design of RNA expression assays.},
language = {en}
}
@book{MeyerSmirnovWeske2011,
author = {Meyer, Andreas and Smirnov, Sergey and Weske, Mathias},
title = {Data in business processes},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-86956-144-8},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53046},
publisher = {Universit{\"a}t Potsdam},
pages = {40},
year = {2011},
abstract = {Process and data are equally important for business process management. Process data is especially relevant in the context of automated business processes, process controlling, and representation of organizations' core assets. One can discover many process modeling languages, each having a specific set of data modeling capabilities and the level of data awareness. The level of data awareness and data modeling capabilities vary significantly from one language to another. This paper evaluates several process modeling languages with respect to the role of data. To find a common ground for comparison, we develop a framework, which systematically organizes process- and data-related aspects of the modeling languages elaborating on the data aspects. Once the framework is in place, we compare twelve process modeling languages against it. We generalize the results of the comparison and identify clusters of similar languages with respect to data awareness.},
language = {de}
}
@phdthesis{Kluth2011,
author = {Kluth, Stephan},
title = {Quantitative modeling and analysis with FMC-QE},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52987},
school = {Universit{\"a}t Potsdam},
year = {2011},
abstract = {The modeling and evaluation calculus FMC-QE, the Fundamental Modeling Concepts for Quanti-tative Evaluation [1], extends the Fundamental Modeling Concepts (FMC) for performance modeling and prediction. In this new methodology, the hierarchical service requests are in the main focus, because they are the origin of every service provisioning process. Similar to physics, these service requests are a tuple of value and unit, which enables hierarchical service request transformations at the hierarchical borders and therefore the hierarchical modeling. Through reducing the model complexity of the models by decomposing the system in different hierarchical views, the distinction between operational and control states and the calculation of the performance values on the assumption of the steady state, FMC-QE has a scalable applica-bility on complex systems. According to FMC, the system is modeled in a 3-dimensional hierarchical representation space, where system performance parameters are described in three arbitrarily fine-grained hierarchi-cal bipartite diagrams. The hierarchical service request structures are modeled in Entity Relationship Diagrams. The static server structures, divided into logical and real servers, are de-scribed as Block Diagrams. The dynamic behavior and the control structures are specified as Petri Nets, more precisely Colored Time Augmented Petri Nets. From the structures and pa-rameters of the performance model, a hierarchical set of equations is derived. The calculation of the performance values is done on the assumption of stationary processes and is based on fundamental laws of the performance analysis: Little's Law and the Forced Traffic Flow Law. Little's Law is used within the different hierarchical levels (horizontal) and the Forced Traffic Flow Law is the key to the dependencies among the hierarchical levels (vertical). This calculation is suitable for complex models and allows a fast (re-)calculation of different performance scenarios in order to support development and configuration decisions. Within the Research Group Zorn at the Hasso Plattner Institute, the work is embedded in a broader research in the development of FMC-QE. While this work is concentrated on the theoretical background, description and definition of the methodology as well as the extension and validation of the applicability, other topics are in the development of an FMC-QE modeling and evaluation tool and the usage of FMC-QE in the design of an adaptive transport layer in order to fulfill Quality of Service and Service Level Agreements in volatile service based environments. This thesis contains a state-of-the-art, the description of FMC-QE as well as extensions of FMC-QE in representative general models and case studies. In the state-of-the-art part of the thesis in chapter 2, an overview on existing Queueing Theory and Time Augmented Petri Net models and other quantitative modeling and evaluation languages and methodologies is given. Also other hierarchical quantitative modeling frameworks will be considered. The description of FMC-QE in chapter 3 consists of a summary of the foundations of FMC-QE, basic definitions, the graphical notations, the FMC-QE Calculus and the modeling of open queueing networks as an introductory example. The extensions of FMC-QE in chapter 4 consist of the integration of the summation method in order to support the handling of closed networks and the modeling of multiclass and semaphore scenarios. Furthermore, FMC-QE is compared to other performance modeling and evaluation approaches. In the case study part in chapter 5, proof-of-concept examples, like the modeling of a service based search portal, a service based SAP NetWeaver application and the Axis2 Web service framework will be provided. Finally, conclusions are given by a summary of contributions and an outlook on future work in chapter 6. [1] Werner Zorn. FMC-QE - A New Approach in Quantitative Modeling. In Hamid R. Arabnia, editor, Procee-dings of the International Conference on Modeling, Simulation and Visualization Methods (MSV 2007) within WorldComp '07, pages 280 - 287, Las Vegas, NV, USA, June 2007. CSREA Press. ISBN 1-60132-029-9.},
language = {en}
}
@phdthesis{Off2011,
author = {Off, Thomas},
title = {Durchg{\"a}ngige Verfolgbarkeit im Vorfeld der Softwareentwicklung von E-Government-Anwendungen : ein ontologiebasierter und modellgetriebener Ansatz am Beispiel von B{\"u}rgerdiensten},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57478},
school = {Universit{\"a}t Potsdam},
year = {2011},
abstract = {Die {\"o}ffentliche Verwaltung setzt seit mehreren Jahren E-Government-Anwendungssysteme ein, um ihre Verwaltungsprozesse intensiver mit moderner Informationstechnik zu unterst{\"u}tzen. Da die {\"o}ffentliche Verwaltung in ihrem Handeln in besonderem Maße an Recht und Gesetz gebunden ist verst{\"a}rkt und verbreitet sich der Zusammenhang zwischen den Gesetzen und Rechtsvorschriften einerseits und der zur Aufgabenunterst{\"u}tzung eingesetzten Informationstechnik andererseits. Aus Sicht der Softwaretechnik handelt es sich bei diesem Zusammenhang um eine spezielle Form der Verfolgbarkeit von Anforderungen (engl. Traceability), die so genannte Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (Pre-Requirements Specification Traceability, kurz Pre-RS Traceability), da sie Aspekte betrifft, die relevant sind, bevor die Anforderungen in eine Spezifikation eingeflossen sind (Urspr{\"u}nge von Anforderungen). Der Ansatz dieser Arbeit leistet einen Beitrag zur Verfolgbarkeit im Vorfeld der Anforderungsspezifikation von E-Government-Anwendungssystemen. Er kombiniert dazu aktuelle Entwicklungen und Standards (insbesondere des World Wide Web Consortium und der Object Management Group) aus den Bereichen Verfolgbarkeit von Anforderungen, Semantic Web, Ontologiesprachen und modellgetriebener Softwareentwicklung. Der L{\"o}sungsansatz umfasst eine spezielle Ontologie des Verwaltungshandeln, die mit den Techniken, Methoden und Werkzeugen des Semantic Web eingesetzt wird, um in Texten von Rechtsvorschriften relevante Urspr{\"u}nge von Anforderungen durch Annotationen mit einer definierten Semantik zu versehen. Darauf aufbauend wird das Ontology Definition Metamodel (ODM) verwendet, um die Annotationen als spezielle Individuen einer Ontologie auf Elemente der Unified Modeling Language (UML) abzubilden. Dadurch entsteht ein neuer Modelltyp Pre-Requirements Model (PRM), der das Vorfeld der Anforderungsspezifikation formalisiert. Modelle diesen Typs k{\"o}nnen auch verwendet werden, um Aspekte zu formalisieren die sich nicht oder nicht vollst{\"a}ndig aus dem Text der Rechtsvorschrift ergeben. Weiterhin bietet das Modell die M{\"o}glichkeit zum Anschluss an die modellgetriebene Softwareentwicklung. In der Arbeit wird deshalb eine Erweiterung der Model Driven Architecture (MDA) vorgeschlagen. Zus{\"a}tzlich zu den etablierten Modelltypen Computation Independent Model (CIM), Platform Independent Model (PIM) und Platform Specific Model (PSM) k{\"o}nnte der Einsatz des PRM Vorteile f{\"u}r die Verfolgbarkeit bringen. Wird die MDA mit dem PRM auf das Vorfeld der Anforderungsspezifikation ausgeweitet, kann eine Transformation des PRM in ein CIM als initiale Anforderungsspezifikation erfolgen, indem der MOF Query View Transformation Standard (QVT) eingesetzt wird. Als Teil des QVT-Standards ist die Aufzeichnung von Verfolgbarkeitsinformationen bei Modelltransformationen verbindlich. Um die semantische L{\"u}cke zwischen PRM und CIM zu {\"u}berbr{\"u}cken, erfolgt analog zum Einsatz des Plattformmodells (PM) in der PIM nach PSM Transformation der Einsatz spezieller Hilfsmodelle. Es kommen daf{\"u}r die im Projekt "E-LoGo" an der Universit{\"a}t Potsdam entwickelten Referenzmodelle zum Einsatz. Durch die Aufzeichnung der Abbildung annotierter Textelemente auf Elemente im PRM und der Transformation der Elemente des PRM in Elemente des CIM kann durchg{\"a}ngige Verfolgbarkeit im Vorfeld der Anforderungsspezifikation erreicht werden. Der Ansatz basiert auf einer so genannten Verfolgbarkeitsdokumentation in Form verlinkter Hypertextdokumente, die mittels XSL-Stylesheet erzeugt wurden und eine Verbindung zur graphischen Darstellung des Diagramms (z. B. Anwendungsfall-, Klassendiagramm der UML) haben. Der Ansatz unterst{\"u}tzt die horizontale Verfolgbarkeit zwischen Elementen unterschiedlicher Modelle vorw{\"a}rts- und r{\"u}ckw{\"a}rtsgerichtet umfassend. Er bietet außerdem vertikale Verfolgbarkeit, die Elemente des gleichen Modells und verschiedener Modellversionen in Beziehung setzt. {\"U}ber den offensichtlichen Nutzen einer durchg{\"a}ngigen Verfolgbarkeit im Vorfeld der Anforderungsspezifikation (z. B. Analyse der Auswirkungen einer Gesetzes{\"a}nderung, Ber{\"u}cksichtigung des vollst{\"a}ndigen Kontextes einer Anforderung bei ihrer Priorisierung) hinausgehend, bietet diese Arbeit eine erste Ansatzm{\"o}glichkeit f{\"u}r eine Feedback-Schleife im Prozess der Gesetzgebung. Stehen beispielsweise mehrere gleichwertige Gestaltungsoptionen eines Gesetzes zur Auswahl, k{\"o}nnen die Auswirkungen jeder Option analysiert und der Aufwand ihrer Umsetzung in E-Government-Anwendungen als Auswahlkriterium ber{\"u}cksichtigt werden. Die am 16. M{\"a}rz 2011 in Kraft getretene {\"A}nderung des NKRG schreibt eine solche Analyse des so genannten „Erf{\"u}llungsaufwands" f{\"u}r Teilbereiche des Verwaltungshandelns bereits heute verbindlich vor. F{\"u}r diese Analyse kann die vorliegende Arbeit einen Ansatz bieten, um zu fundierten Aussagen {\"u}ber den {\"A}nderungsaufwand eingesetzter E-Government-Anwendungssysteme zu kommen.},
language = {de}
}
@book{DraisbachNaumannSzottetal.2012,
author = {Draisbach, Uwe and Naumann, Felix and Szott, Sascha and Wonneberg, Oliver},
title = {Adaptive windows for duplicate detection},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-86956-143-1},
issn = {1613-5652},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53007},
publisher = {Universit{\"a}t Potsdam},
pages = {41},
year = {2012},
abstract = {Duplicate detection is the task of identifying all groups of records within a data set that represent the same real-world entity, respectively. This task is difficult, because (i) representations might differ slightly, so some similarity measure must be defined to compare pairs of records and (ii) data sets might have a high volume making a pair-wise comparison of all records infeasible. To tackle the second problem, many algorithms have been suggested that partition the data set and compare all record pairs only within each partition. One well-known such approach is the Sorted Neighborhood Method (SNM), which sorts the data according to some key and then advances a window over the data comparing only records that appear within the same window. We propose several variations of SNM that have in common a varying window size and advancement. The general intuition of such adaptive windows is that there might be regions of high similarity suggesting a larger window size and regions of lower similarity suggesting a smaller window size. We propose and thoroughly evaluate several adaption strategies, some of which are provably better than the original SNM in terms of efficiency (same results with fewer comparisons).},
language = {en}
}
@phdthesis{Berg2013,
author = {Berg, Gregor},
title = {Virtual prototypes for the model-based elicitation and validation of collaborative scenarios},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-69729},
school = {Universit{\"a}t Potsdam},
year = {2013},
abstract = {Requirements engineers have to elicit, document, and validate how stakeholders act and interact to achieve their common goals in collaborative scenarios. Only after gathering all information concerning who interacts with whom to do what and why, can a software system be designed and realized which supports the stakeholders to do their work. To capture and structure requirements of different (groups of) stakeholders, scenario-based approaches have been widely used and investigated. Still, the elicitation and validation of requirements covering collaborative scenarios remains complicated, since the required information is highly intertwined, fragmented, and distributed over several stakeholders. Hence, it can only be elicited and validated collaboratively. In times of globally distributed companies, scheduling and conducting workshops with groups of stakeholders is usually not feasible due to budget and time constraints. Talking to individual stakeholders, on the other hand, is feasible but leads to fragmented and incomplete stakeholder scenarios. Going back and forth between different individual stakeholders to resolve this fragmentation and explore uncovered alternatives is an error-prone, time-consuming, and expensive task for the requirements engineers. While formal modeling methods can be employed to automatically check and ensure consistency of stakeholder scenarios, such methods introduce additional overhead since their formal notations have to be explained in each interaction between stakeholders and requirements engineers. Tangible prototypes as they are used in other disciplines such as design, on the other hand, allow designers to feasibly validate and iterate concepts and requirements with stakeholders. This thesis proposes a model-based approach for prototyping formal behavioral specifications of stakeholders who are involved in collaborative scenarios. By simulating and animating such specifications in a remote domain-specific visualization, stakeholders can experience and validate the scenarios captured so far, i.e., how other stakeholders act and react. This interactive scenario simulation is referred to as a model-based virtual prototype. Moreover, through observing how stakeholders interact with a virtual prototype of their collaborative scenarios, formal behavioral specifications can be automatically derived which complete the otherwise fragmented scenarios. This, in turn, enables requirements engineers to elicit and validate collaborative scenarios in individual stakeholder sessions - decoupled, since stakeholders can participate remotely and are not forced to be available for a joint session at the same time. This thesis discusses and evaluates the feasibility, understandability, and modifiability of model-based virtual prototypes. Similarly to how physical prototypes are perceived, the presented approach brings behavioral models closer to being tangible for stakeholders and, moreover, combines the advantages of joint stakeholder sessions and decoupled sessions.},
language = {en}
}
@article{Kujath2016,
author = {Kujath, Bertold},
title = {Lernwirksamkeits- und Zielgruppenanalyse f{\"u}r ein Lehrvideo zum informatischen Probleml{\"o}sen},
series = {Commentarii informaticae didacticae (CID)},
journal = {Commentarii informaticae didacticae (CID)},
number = {10},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-86956-376-3},
issn = {1868-0844},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94797},
pages = {25 -- 39},
year = {2016},
abstract = {Aus einer Vergleichsstudie mit starken und schwachen Probleml{\"o}sern konnten Erkenntnisse {\"u}ber die effizienten Herangehensweisen von Hochleistern an Informatikprobleme gewonnen werden. Diese Erkenntnisse wurden in einem Lehrvideo zum informatischen Probleml{\"o}sen didaktisch aufgearbeitet, sodass Lernenden der Einsatz von Baumstrukturen und Rekursion im konkreten Kontext gezeigt werden kann. Nun wurde die tats{\"a}chliche Lernwirksamkeit des Videos sowie die Definition der Zielgruppe in einer Vergleichsstudie mit 66 Studienanf{\"a}ngern {\"u}berpr{\"u}ft.},
language = {de}
}
@article{BoehneKreitzKnobelsdorf2016,
author = {B{\"o}hne, Sebastian and Kreitz, Christoph and Knobelsdorf, Maria},
title = {Mathematisches Argumentieren und Beweisen mit dem Theorembeweiser Coq},
series = {Commentarii informaticae didacticae (CID)},
journal = {Commentarii informaticae didacticae (CID)},
number = {10},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-86956-376-3},
issn = {1868-0844},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94824},
pages = {69 -- 80},
year = {2016},
abstract = {Informatik-Studierende haben in der Mehrzahl Schwierigkeiten, einen Einstieg in die Theoretische Informatik zu finden und die Leistungsanforderungen in den Endklausuren der zugeh{\"o}rigen Lehrveranstaltungen zu erf{\"u}llen. Wir argumentieren, dass dieser Symptomatik mangelnde Kompetenzen im Umgang mit abstrakten und stark formalisierten Themeninhalten zugrunde liegen und schlagen vor, einen Beweisassistenten als interaktives Lernwerkzeug in der Eingangslehre der Theoretischen Informatik zu nutzen, um entsprechende Kompetenzen zu st{\"a}rken.},
language = {de}
}
@phdthesis{Waetzoldt2016,
author = {W{\"a}tzoldt, Sebastian},
title = {Modeling collaborations in adaptive systems of systems},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-97494},
school = {Universit{\"a}t Potsdam},
pages = {XII, 380},
year = {2016},
abstract = {Recently, due to an increasing demand on functionality and flexibility, beforehand isolated systems have become interconnected to gain powerful adaptive Systems of Systems (SoS) solutions with an overall robust, flexible and emergent behavior. The adaptive SoS comprises a variety of different system types ranging from small embedded to adaptive cyber-physical systems. On the one hand, each system is independent, follows a local strategy and optimizes its behavior to reach its goals. On the other hand, systems must cooperate with each other to enrich the overall functionality to jointly perform on the SoS level reaching global goals, which cannot be satisfied by one system alone. Due to difficulties of local and global behavior optimizations conflicts may arise between systems that have to be solved by the adaptive SoS. This thesis proposes a modeling language that facilitates the description of an adaptive SoS by considering the adaptation capabilities in form of feedback loops as first class entities. Moreover, this thesis adopts the Models@runtime approach to integrate the available knowledge in the systems as runtime models into the modeled adaptation logic. Furthermore, the modeling language focuses on the description of system interactions within the adaptive SoS to reason about individual system functionality and how it emerges via collaborations to an overall joint SoS behavior. Therefore, the modeling language approach enables the specification of local adaptive system behavior, the integration of knowledge in form of runtime models and the joint interactions via collaboration to place the available adaptive behavior in an overall layered, adaptive SoS architecture. Beside the modeling language, this thesis proposes analysis rules to investigate the modeled adaptive SoS, which enables the detection of architectural patterns as well as design flaws and pinpoints to possible system threats. Moreover, a simulation framework is presented, which allows the direct execution of the modeled SoS architecture. Therefore, the analysis rules and the simulation framework can be used to verify the interplay between systems as well as the modeled adaptation effects within the SoS. This thesis realizes the proposed concepts of the modeling language by mapping them to a state of the art standard from the automotive domain and thus, showing their applicability to actual systems. Finally, the modeling language approach is evaluated by remodeling up to date research scenarios from different domains, which demonstrates that the modeling language concepts are powerful enough to cope with a broad range of existing research problems.},
language = {en}
}
@phdthesis{Heise2014,
author = {Heise, Arvid},
title = {Data cleansing and integration operators for a parallel data analytics platform},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-77100},
school = {Universit{\"a}t Potsdam},
pages = {ii, 179},
year = {2014},
abstract = {The data quality of real-world datasets need to be constantly monitored and maintained to allow organizations and individuals to reliably use their data. Especially, data integration projects suffer from poor initial data quality and as a consequence consume more effort and money. Commercial products and research prototypes for data cleansing and integration help users to improve the quality of individual and combined datasets. They can be divided into either standalone systems or database management system (DBMS) extensions. On the one hand, standalone systems do not interact well with DBMS and require time-consuming data imports and exports. On the other hand, DBMS extensions are often limited by the underlying system and do not cover the full set of data cleansing and integration tasks. We overcome both limitations by implementing a concise set of five data cleansing and integration operators on the parallel data analytics platform Stratosphere. We define the semantics of the operators, present their parallel implementation, and devise optimization techniques for individual operators and combinations thereof. Users specify declarative queries in our query language METEOR with our new operators to improve the data quality of individual datasets or integrate them to larger datasets. By integrating the data cleansing operators into the higher level language layer of Stratosphere, users can easily combine cleansing operators with operators from other domains, such as information extraction, to complex data flows. Through a generic description of the operators, the Stratosphere optimizer reorders operators even from different domains to find better query plans. As a case study, we reimplemented a part of the large Open Government Data integration project GovWILD with our new operators and show that our queries run significantly faster than the original GovWILD queries, which rely on relational operators. Evaluation reveals that our operators exhibit good scalability on up to 100 cores, so that even larger inputs can be efficiently processed by scaling out to more machines. Finally, our scripts are considerably shorter than the original GovWILD scripts, which results in better maintainability of the scripts.},
language = {en}
}
@misc{Voland2014,
type = {Master Thesis},
author = {Voland, Patrick},
title = {Webbasierte Visualisierung von Extended Floating Car Data (XFCD)},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-96751},
school = {Universit{\"a}t Potsdam},
pages = {VIII, 176},
year = {2014},
abstract = {Moderne Kraftfahrzeuge verf{\"u}gen {\"u}ber eine Vielzahl an Sensoren, welche f{\"u}r einen reibungslosen technischen Betrieb ben{\"o}tigt werden. Hierzu z{\"a}hlen neben fahrzeugspezifischen Sensoren (wie z.B. Motordrehzahl und Fahrzeuggeschwindigkeit) auch umweltspezifische Sensoren (wie z.B. Luftdruck und Umgebungstemperatur). Durch die zunehmende technische Vernetzung wird es m{\"o}glich, diese Daten der Kraftfahrzeugelektronik aus dem Fahrzeug heraus f{\"u}r die verschiedensten Zwecke zu verwenden. Die vorliegende Arbeit soll einen Beitrag dazu leisten, diese neue Art an massenhaften Daten im Sinne des Konzepts der „Extended Floating Car Data" (XFCD) als Geoinformationen nutzbar zu machen und diese f{\"u}r raumzeitliche Visualisierungen (zur visuellen Analyse) anwenden zu k{\"o}nnen. In diesem Zusammenhang wird speziell die Perspektive des Umwelt- und Verkehrsmonitoring betrachtet, wobei die Anforderungen und Potentiale mit Hilfe von Experteninterviews untersucht werden. Es stellt sich die Frage, welche Daten durch die Kraftfahrzeugelektronik geliefert und wie diese m{\"o}glichst automatisiert erfasst, verarbeitet, visualisiert und {\"o}ffentlich bereitgestellt werden k{\"o}nnen. Neben theoretischen und technischen Grundlagen zur Datenerfassung und -nutzung liegt der Fokus auf den Methoden der kartographischen Visualisierung. Dabei soll der Frage nachgegangenen werden, ob eine technische Implementierung ausschließlich unter Verwendung von Open Source Software m{\"o}glich ist. Das Ziel der Arbeit bildet ein zweigliedriger Ansatz, welcher zum einen die Visualisierung f{\"u}r ein exemplarisch gew{\"a}hltes Anwendungsszenario und zum anderen die prototypische Implementierung von der Datenerfassung im Fahrzeug unter Verwendung der gesetzlich vorgeschriebenen „On Board Diagnose"-Schnittstelle und einem Smartphone-gest{\"u}tzten Ablauf bis zur webbasierten Visualisierung umfasst.},
language = {de}
}
@book{SmirnovReijersNugterenetal.2010,
author = {Smirnov, Sergey and Reijers, Hajo A. and Nugteren, Thijs and Weske, Mathias},
title = {Business process model abstraction : theory and practice},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-86956-054-0},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41782},
publisher = {Universit{\"a}t Potsdam},
pages = {17},
year = {2010},
abstract = {Business process management aims at capturing, understanding, and improving work in organizations. The central artifacts are process models, which serve different purposes. Detailed process models are used to analyze concrete working procedures, while high-level models show, for instance, handovers between departments. To provide different views on process models, business process model abstraction has emerged. While several approaches have been proposed, a number of abstraction use case that are both relevant for industry and scientifically challenging are yet to be addressed. In this paper we systematically develop, classify, and consolidate different use cases for business process model abstraction. The reported work is based on a study with BPM users in the health insurance sector and validated with a BPM consultancy company and a large BPM vendor. The identified fifteen abstraction use cases reflect the industry demand. The related work on business process model abstraction is evaluated against the use cases, which leads to a research agenda.},
language = {en}
}
@phdthesis{Dornhege2006,
author = {Dornhege, Guido},
title = {Increasing information transfer rates for brain-computer interfacing},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7690},
school = {Universit{\"a}t Potsdam},
year = {2006},
abstract = {The goal of a Brain-Computer Interface (BCI) consists of the development of a unidirectional interface between a human and a computer to allow control of a device only via brain signals. While the BCI systems of almost all other groups require the user to be trained over several weeks or even months, the group of Prof. Dr. Klaus-Robert M{\"u}ller in Berlin and Potsdam, which I belong to, was one of the first research groups in this field which used machine learning techniques on a large scale. The adaptivity of the processing system to the individual brain patterns of the subject confers huge advantages for the user. Thus BCI research is considered a hot topic in machine learning and computer science. It requires interdisciplinary cooperation between disparate fields such as neuroscience, since only by combining machine learning and signal processing techniques based on neurophysiological knowledge will the largest progress be made. In this work I particularly deal with my part of this project, which lies mainly in the area of computer science. I have considered the following three main points: Establishing a performance measure based on information theory: I have critically illuminated the assumptions of Shannon's information transfer rate for application in a BCI context. By establishing suitable coding strategies I was able to show that this theoretical measure approximates quite well to what is practically achieveable. Transfer and development of suitable signal processing and machine learning techniques: One substantial component of my work was to develop several machine learning and signal processing algorithms to improve the efficiency of a BCI. Based on the neurophysiological knowledge that several independent EEG features can be observed for some mental states, I have developed a method for combining different and maybe independent features which improved performance. In some cases the performance of the combination algorithm outperforms the best single performance by more than 50 \%. Furthermore, I have theoretically and practically addressed via the development of suitable algorithms the question of the optimal number of classes which should be used for a BCI. It transpired that with BCI performances reported so far, three or four different mental states are optimal. For another extension I have combined ideas from signal processing with those of machine learning since a high gain can be achieved if the temporal filtering, i.e., the choice of frequency bands, is automatically adapted to each subject individually. Implementation of the Berlin brain computer interface and realization of suitable experiments: Finally a further substantial component of my work was to realize an online BCI system which includes the developed methods, but is also flexible enough to allow the simple realization of new algorithms and ideas. So far, bitrates of up to 40 bits per minute have been achieved with this system by absolutely untrained users which, compared to results of other groups, is highly successful.},
subject = {Kybernetik},
language = {en}
}
@phdthesis{Scholz2006,
author = {Scholz, Matthias},
title = {Approaches to analyse and interpret biological profile data},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7839},
school = {Universit{\"a}t Potsdam},
year = {2006},
abstract = {Advances in biotechnologies rapidly increase the number of molecules of a cell which can be observed simultaneously. This includes expression levels of thousands or ten-thousands of genes as well as concentration levels of metabolites or proteins. Such Profile data, observed at different times or at different experimental conditions (e.g., heat or dry stress), show how the biological experiment is reflected on the molecular level. This information is helpful to understand the molecular behaviour and to identify molecules or combination of molecules that characterise specific biological condition (e.g., disease). This work shows the potentials of component extraction algorithms to identify the major factors which influenced the observed data. This can be the expected experimental factors such as the time or temperature as well as unexpected factors such as technical artefacts or even unknown biological behaviour. Extracting components means to reduce the very high-dimensional data to a small set of new variables termed components. Each component is a combination of all original variables. The classical approach for that purpose is the principal component analysis (PCA). It is shown that, in contrast to PCA which maximises the variance only, modern approaches such as independent component analysis (ICA) are more suitable for analysing molecular data. The condition of independence between components of ICA fits more naturally our assumption of individual (independent) factors which influence the data. This higher potential of ICA is demonstrated by a crossing experiment of the model plant Arabidopsis thaliana (Thale Cress). The experimental factors could be well identified and, in addition, ICA could even detect a technical artefact. However, in continuously observations such as in time experiments, the data show, in general, a nonlinear distribution. To analyse such nonlinear data, a nonlinear extension of PCA is used. This nonlinear PCA (NLPCA) is based on a neural network algorithm. The algorithm is adapted to be applicable to incomplete molecular data sets. Thus, it provides also the ability to estimate the missing data. The potential of nonlinear PCA to identify nonlinear factors is demonstrated by a cold stress experiment of Arabidopsis thaliana. The results of component analysis can be used to build a molecular network model. Since it includes functional dependencies it is termed functional network. Applied to the cold stress data, it is shown that functional networks are appropriate to visualise biological processes and thereby reveals molecular dynamics.},
subject = {Bioinformatik},
language = {en}
}
@book{OPUS4-1390,
title = {Wir gehen multimedial. Kommt Ihr mit?},
editor = {Laabs, Hans-Joachim},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-939469-59-9},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-15034},
publisher = {Universit{\"a}t Potsdam},
pages = {158},
year = {2007},
abstract = {"Wir gehen multimedial. Kommt ihr mit?" war Aufruf und Leitmotiv der MultimeDies 2007. Es kamen sehr viele mit, vor allem Lehrende und Lernende der Universit{\"a}t Potsdam, aber auch Firmen. Diese Veranstaltung setzt eine Tradition fort, die im Bem{\"u}hen steht {\"u}ber zukunftsweisende Technologien und Projekte, {\"u}ber Angebote und praktikable L{\"o}sungen an der Universit{\"a}t zu informieren. Die Vortr{\"a}ge wurden in kurzen Beitr{\"a}gen zusammengestellt. Sie gliedern sich in zwei Gruppen, zum einen der Bereitstellung, zum anderen der Nutzung von Multimedia.},
language = {de}
}
@phdthesis{Weigend2007,
author = {Weigend, Michael},
title = {Intuitive Modelle der Informatik},
publisher = {Universit{\"a}tsverlag Potsdam},
address = {Potsdam},
isbn = {978-3-940793-08-9},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-15787},
school = {Universit{\"a}t Potsdam},
pages = {331},
year = {2007},
abstract = {Intuitive Modelle der Informatik sind gedankliche Vorstellungen {\"u}ber informatische Konzepte, die mit subjektiver Gewissheit verbunden sind. Menschen verwenden sie, wenn sie die Arbeitsweise von Computerprogrammen nachvollziehen oder anderen erkl{\"a}ren, die logische Korrektheit eines Programms pr{\"u}fen oder in einem kreativen Prozess selbst Programme entwickeln. Intuitive Modelle k{\"o}nnen auf verschiedene Weise repr{\"a}sentiert und kommuniziert werden, etwa verbal-abstrakt, durch ablauf- oder strukturorientierte Abbildungen und Filme oder konkrete Beispiele. Diskutiert werden in dieser Arbeit grundlegende intuitive Modelle f{\"u}r folgende inhaltliche Aspekte einer Programmausf{\"u}hrung: Allokation von Aktivit{\"a}t bei einer Programmausf{\"u}hrung, Benennung von Entit{\"a}ten, Daten, Funktionen, Verarbeitung, Kontrollstrukturen zur Steuerung von Programml{\"a}ufen, Rekursion, Klassen und Objekte. Mit Hilfe eines Systems von Online-Spielen, der Python Visual Sandbox, werden die psychische Realit{\"a}t verschiedener intuitiver Modelle bei Programmieranf{\"a}ngern nachgewiesen und fehlerhafte Anwendungen (Fehlvorstellungen) identifiziert.},
language = {de}
}
@misc{Trapp2007,
type = {Master Thesis},
author = {Trapp, Matthias},
title = {Analysis and exploration of virtual 3D city models using 3D information lenses},
url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13930},
school = {Universit{\"a}t Potsdam},
year = {2007},
abstract = {This thesis addresses real-time rendering techniques for 3D information lenses based on the focus \& context metaphor. It analyzes, conceives, implements, and reviews its applicability to objects and structures of virtual 3D city models. In contrast to digital terrain models, the application of focus \& context visualization to virtual 3D city models is barely researched. However, the purposeful visualization of contextual data of is extreme importance for the interactive exploration and analysis of this field. Programmable hardware enables the implementation of new lens techniques, that allow the augmentation of the perceptive and cognitive quality of the visualization compared to classical perspective projections. A set of 3D information lenses is integrated into a 3D scene-graph system: • Occlusion lenses modify the appearance of virtual 3D city model objects to resolve their occlusion and consequently facilitate the navigation. • Best-view lenses display city model objects in a priority-based manner and mediate their meta information. Thus, they support exploration and navigation of virtual 3D city models. • Color and deformation lenses modify the appearance and geometry of 3D city models to facilitate their perception. The presented techniques for 3D information lenses and their application to virtual 3D city models clarify their potential for interactive visualization and form a base for further development.},
language = {en}
}