@phdthesis{Vogel2018,
  author    = {Vogel, Thomas},
  title     = {Model-driven engineering of self-adaptive software},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-409755},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 357},
  year      = {2018},
  abstract  = {The development of self-adaptive software requires the engineering of an adaptation engine that controls the underlying adaptable software by a feedback loop. State-of-the-art approaches prescribe the feedback loop in terms of numbers, how the activities (e.g., monitor, analyze, plan, and execute (MAPE)) and the knowledge are structured to a feedback loop, and the type of knowledge. Moreover, the feedback loop is usually hidden in the implementation or framework and therefore not visible in the architectural design. Additionally, an adaptation engine often employs runtime models that either represent the adaptable software or capture strategic knowledge such as reconfiguration strategies. State-of-the-art approaches do not systematically address the interplay of such runtime models, which would otherwise allow developers to freely design the entire feedback loop. This thesis presents ExecUtable RuntimE MegAmodels (EUREMA), an integrated model-driven engineering (MDE) solution that rigorously uses models for engineering feedback loops. EUREMA provides a domain-specific modeling language to specify and an interpreter to execute feedback loops. The language allows developers to freely design a feedback loop concerning the activities and runtime models (knowledge) as well as the number of feedback loops. It further supports structuring the feedback loops in the adaptation engine that follows a layered architectural style. Thus, EUREMA makes the feedback loops explicit in the design and enables developers to reason about design decisions. To address the interplay of runtime models, we propose the concept of a runtime megamodel, which is a runtime model that contains other runtime models as well as activities (e.g., MAPE) working on the contained models. This concept is the underlying principle of EUREMA. The resulting EUREMA (mega)models are kept alive at runtime and they are directly executed by the EUREMA interpreter to run the feedback loops. Interpretation provides the flexibility to dynamically adapt a feedback loop. In this context, EUREMA supports engineering self-adaptive software in which feedback loops run independently or in a coordinated fashion within the same layer as well as on top of each other in different layers of the adaptation engine. Moreover, we consider preliminary means to evolve self-adaptive software by providing a maintenance interface to the adaptation engine. This thesis discusses in detail EUREMA by applying it to different scenarios such as single, multiple, and stacked feedback loops for self-repairing and self-optimizing the mRUBiS application. Moreover, it investigates the design and expressiveness of EUREMA, reports on experiments with a running system (mRUBiS) and with alternative solutions, and assesses EUREMA with respect to quality attributes such as performance and scalability. The conducted evaluation provides evidence that EUREMA as an integrated and open MDE approach for engineering self-adaptive software seamlessly integrates the development and runtime environments using the same formalism to specify and execute feedback loops, supports the dynamic adaptation of feedback loops in layered architectures, and achieves an efficient execution of feedback loops by leveraging incrementality.},
  language  = {en}
}
@book{vanderWaltOdunAyoBastianetal.2018,
  author    = {van der Walt, Estee and Odun-Ayo, Isaac and Bastian, Matthias and Eldin Elsaid, Mohamed Esam},
  title     = {Proceedings of the Fifth HPI Cloud Symposium "Operating the Cloud" 2017},
  number    = {122},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-432-6},
  issn      = {1613-5652},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-411330},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {70},
  year      = {2018},
  abstract  = {Every year, the Hasso Plattner Institute (HPI) invites guests from industry and academia to a collaborative scientific workshop on the topic Operating the Cloud. Our goal is to provide a forum for the exchange of knowledge and experience between industry and academia. Co-located with the event is the HPI's Future SOC Lab day, which offers an additional attractive and conducive environment for scientific and industry related discussions. Operating the Cloud aims to be a platform for productive interactions of innovative ideas, visions, and upcoming technologies in the field of cloud operation and administration. In these proceedings, the results of the fifth HPI cloud symposium Operating the Cloud 2017 are published. We thank the authors for exciting presentations and insights into their current work and research. Moreover, we look forward to more interesting submissions for the upcoming symposium in 2018.},
  language  = {en}
}
@phdthesis{Sapegin2018,
  author    = {Sapegin, Andrey},
  title     = {High-Speed Security Log Analytics Using Hybrid Outlier Detection},
  doi       = {10.25932/publishup-42611},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426118},
  school      = {Universit{\"a}t Potsdam},
  pages     = {162},
  year      = {2018},
  abstract  = {The rapid development and integration of Information Technologies over the last decades influenced all areas of our life, including the business world. Yet not only the modern enterprises become digitalised, but also security and criminal threats move into the digital sphere. To withstand these threats, modern companies must be aware of all activities within their computer networks. The keystone for such continuous security monitoring is a Security Information and Event Management (SIEM) system that collects and processes all security-related log messages from the entire enterprise network. However, digital transformations and technologies, such as network virtualisation and widespread usage of mobile communications, lead to a constantly increasing number of monitored devices and systems. As a result, the amount of data that has to be processed by a SIEM system is increasing rapidly. Besides that, in-depth security analysis of the captured data requires the application of rather sophisticated outlier detection algorithms that have a high computational complexity. Existing outlier detection methods often suffer from performance issues and are not directly applicable for high-speed and high-volume analysis of heterogeneous security-related events, which becomes a major challenge for modern SIEM systems nowadays. This thesis provides a number of solutions for the mentioned challenges. First, it proposes a new SIEM system architecture for high-speed processing of security events, implementing parallel, in-memory and in-database processing principles. The proposed architecture also utilises the most efficient log format for high-speed data normalisation. Next, the thesis offers several novel high-speed outlier detection methods, including generic Hybrid Outlier Detection that can efficiently be used for Big Data analysis. Finally, the special User Behaviour Outlier Detection is proposed for better threat detection and analysis of particular user behaviour cases. The proposed architecture and methods were evaluated in terms of both performance and accuracy, as well as compared with classical architecture and existing algorithms. These evaluations were performed on multiple data sets, including simulated data, well-known public intrusion detection data set, and real data from the large multinational enterprise. The evaluation results have proved the high performance and efficacy of the developed methods. All concepts proposed in this thesis were integrated into the prototype of the SIEM system, capable of high-speed analysis of Big Security Data, which makes this integrated SIEM platform highly relevant for modern enterprise security applications.},
  language  = {en}
}
@phdthesis{Richter2018,
  author    = {Richter, Rico},
  title     = {Concepts and techniques for processing and rendering of massive 3D point clouds},
  doi       = {10.25932/publishup-42330},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-423304},
  school      = {Universit{\"a}t Potsdam},
  pages     = {v, 131},
  year      = {2018},
  abstract  = {Remote sensing technology, such as airborne, mobile, or terrestrial laser scanning, and photogrammetric techniques, are fundamental approaches for efficient, automatic creation of digital representations of spatial environments. For example, they allow us to generate 3D point clouds of landscapes, cities, infrastructure networks, and sites. As essential and universal category of geodata, 3D point clouds are used and processed by a growing number of applications, services, and systems such as in the domains of urban planning, landscape architecture, environmental monitoring, disaster management, virtual geographic environments as well as for spatial analysis and simulation. While the acquisition processes for 3D point clouds become more and more reliable and widely-used, applications and systems are faced with more and more 3D point cloud data. In addition, 3D point clouds, by their very nature, are raw data, i.e., they do not contain any structural or semantics information. Many processing strategies common to GIS such as deriving polygon-based 3D models generally do not scale for billions of points. GIS typically reduce data density and precision of 3D point clouds to cope with the sheer amount of data, but that results in a significant loss of valuable information at the same time. This thesis proposes concepts and techniques designed to efficiently store and process massive 3D point clouds. To this end, object-class segmentation approaches are presented to attribute semantics to 3D point clouds, used, for example, to identify building, vegetation, and ground structures and, thus, to enable processing, analyzing, and visualizing 3D point clouds in a more effective and efficient way. Similarly, change detection and updating strategies for 3D point clouds are introduced that allow for reducing storage requirements and incrementally updating 3D point cloud databases. In addition, this thesis presents out-of-core, real-time rendering techniques used to interactively explore 3D point clouds and related analysis results. All techniques have been implemented based on specialized spatial data structures, out-of-core algorithms, and GPU-based processing schemas to cope with massive 3D point clouds having billions of points. All proposed techniques have been evaluated and demonstrated their applicability to the field of geospatial applications and systems, in particular for tasks such as classification, processing, and visualization. Case studies for 3D point clouds of entire cities with up to 80 billion points show that the presented approaches open up new ways to manage and apply large-scale, dense, and time-variant 3D point clouds as required by a rapidly growing number of applications and systems.},
  language  = {en}
}
@book{ReschkeTaeumelPapeetal.2018,
  author    = {Reschke, Jakob and Taeumel, Marcel and Pape, Tobias and Niephaus, Fabio and Hirschfeld, Robert},
  title     = {Towards version control in object-based systems},
  volume    = {121},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-430-2},
  issn      = {1613-5652},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-410812},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {100},
  year      = {2018},
  abstract  = {Version control is a widely used practice among software developers. It reduces the risk of changing their software and allows them to manage different configurations and to collaborate with others more efficiently. This is amplified by code sharing platforms such as GitHub or Bitbucket. Most version control systems track files (e.g., Git, Mercurial, and Subversion do), but some programming environments do not operate on files, but on objects instead (many Smalltalk implementations do). Users of such environments want to use version control for their objects anyway. Specialized version control systems, such as the ones available for Smalltalk systems (e.g., ENVY/Developer and Monticello), focus on a small subset of objects that can be versioned. Most of these systems concentrate on the tracking of methods, classes, and configurations of these. Other user-defined and user-built objects are either not eligible for version control at all, tracking them involves complicated workarounds, or a fixed, domain-unspecific serialization format is used that does not equally suit all kinds of objects. Moreover, these version control systems that are specific to a programming environment require their own code sharing platforms; popular, well-established platforms for file-based version control systems cannot be used or adapter solutions need to be implemented and maintained. To improve the situation for version control of arbitrary objects, a framework for tracking, converting, and storing of objects is presented in this report. It allows editions of objects to be stored in an exchangeable, existing backend version control system. The platforms of the backend version control system can thus be reused. Users and objects have control over how objects are captured for the purpose of version control. Domain-specific requirements can be implemented. The storage format (i.e. the file format, when file-based backend version control systems are used) can also vary from one object to another. Different editions of objects can be compared and sets of changes can be applied to graphs of objects. A generic way for capturing and restoring that supports most kinds of objects is described. It models each object as a collection of slots. Thus, users can begin to track their objects without first having to implement version control supplements for their own kinds of objects. The proposed architecture is evaluated using a prototype implementation that can be used to track objects in Squeak/Smalltalk with Git. The prototype improves the suboptimal standing of user objects with respect to version control described above and also simplifies some version control tasks for classes and methods as well. It also raises new problems, which are discussed in this report as well.},
  language  = {en}
}
@book{MeinelGayvoronskayaSchnjakin2018,
  author    = {Meinel, Christoph and Gayvoronskaya, Tatiana and Schnjakin, Maxim},
  title     = {Blockchain},
  number    = {124},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-441-8},
  issn      = {1613-5652},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414525},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {102},
  year      = {2018},
  abstract  = {The term blockchain has recently become a buzzword, but only few know what exactly lies behind this approach. According to a survey, issued in the first quarter of 2017, the term is only known by 35 percent of German medium-sized enterprise representatives. However, the blockchain technology is very interesting for the mass media because of its rapid development and global capturing of different markets. For example, many see blockchain technology either as an all-purpose weapon— which only a few have access to—or as a hacker technology for secret deals in the darknet. The innovation of blockchain technology is found in its successful combination of already existing approaches: such as decentralized networks, cryptography, and consensus models. This innovative concept makes it possible to exchange values in a decentralized system. At the same time, there is no requirement for trust between its nodes (e.g. users). With this study the Hasso Plattner Institute would like to help readers form their own opinion about blockchain technology, and to distinguish between truly innovative properties and hype. The authors of the present study analyze the positive and negative properties of the blockchain architecture and suggest possible solutions, which can contribute to the efficient use of the technology. We recommend that every company define a clear target for the intended application, which is achievable with a reasonable cost-benefit ration, before deciding on this technology. Both the possibilities and the limitations of blockchain technology need to be considered. The relevant steps that must be taken in this respect are summarized /summed up for the reader in this study. Furthermore, this study elaborates on urgent problems such as the scalability of the blockchain, appropriate consensus algorithm and security, including various types of possible attacks and their countermeasures. New blockchains, for example, run the risk of reducing security, as changes to existing technology can lead to lacks in the security and failures. After discussing the innovative properties and problems of the blockchain technology, its implementation is discussed. There are a lot of implementation opportunities for companies available who are interested in the blockchain realization. The numerous applications have either their own blockchain as a basis or use existing and widespread blockchain systems. Various consortia and projects offer "blockchain-as-a-service{\"a}nd help other companies to develop, test and deploy their own applications. This study gives a detailed overview of diverse relevant applications and projects in the field of blockchain technology. As this technology is still a relatively young and fast developing approach, it still lacks uniform standards to allow the cooperation of different systems and to which all developers can adhere. Currently, developers are orienting themselves to Bitcoin, Ethereum and Hyperledger systems, which serve as the basis for many other blockchain applications. The goal is to give readers a clear and comprehensive overview of blockchain technology and its capabilities.},
  language  = {en}
}
@phdthesis{Lopes2018,
  author    = {Lopes, Pedro},
  title     = {Interactive Systems Based on Electrical Muscle Stimulation},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421165},
  school      = {Universit{\"a}t Potsdam},
  pages     = {171},
  year      = {2018},
  abstract  = {How can interactive devices connect with users in the most immediate and intimate way? This question has driven interactive computing for decades. Throughout the last decades, we witnessed how mobile devices moved computing into users' pockets, and recently, wearables put computing in constant physical contact with the user's skin. In both cases moving the devices closer to users allowed devices to sense more of the user, and thus act more personal. The main question that drives our research is: what is the next logical step? Some researchers argue that the next generation of interactive devices will move past the user's skin and be directly implanted inside the user's body. This has already happened in that we have pacemakers, insulin pumps, etc. However, we argue that what we see is not devices moving towards the inside of the user's body, but rather towards the body's biological "interface" they need to address in order to perform their function. To implement our vision, we created a set of devices that intentionally borrow parts of the user's body for input and output, rather than adding more technology to the body. In this dissertation we present one specific flavor of such devices, i.e., devices that borrow the user's muscles. We engineered I/O devices that interact with the user by reading and controlling muscle activity. To achieve the latter, our devices are based on medical-grade signal generators and electrodes attached to the user's skin that send electrical impulses to the user's muscles; these impulses then cause the user's muscles to contract. While electrical muscle stimulation (EMS) devices have been used to regenerate lost motor functions in rehabilitation medicine since the 1960s, in this dissertation, we propose a new perspective: EMS as a means for creating interactive systems. We start by presenting seven prototypes of interactive devices that we have created to illustrate several benefits of EMS. These devices form two main categories: (1) Devices that allow users eyes-free access to information by means of their proprioceptive sense, such as the value of a variable in a computer system, a tool, or a plot; (2) Devices that increase immersion in virtual reality by simulating large forces, such as wind, physical impact, or walls and heavy objects. Then, we analyze the potential of EMS to build interactive systems that miniaturize well and discuss how they leverage our proprioceptive sense as an I/O modality. We proceed by laying out the benefits and disadvantages of both EMS and mechanical haptic devices, such as exoskeletons. We conclude by sketching an outline for future research on EMS by listing open technical, ethical and philosophical questions that we left unanswered.},
  language  = {en}
}
@phdthesis{Kruse2018,
  author    = {Kruse, Sebastian},
  title     = {Scalable data profiling},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-412521},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ii, 156},
  year      = {2018},
  abstract  = {Data profiling is the act of extracting structural metadata from datasets. Structural metadata, such as data dependencies and statistics, can support data management operations, such as data integration and data cleaning. Data management often is the most time-consuming activity in any data-related project. Its support is extremely valuable in our data-driven world, so that more time can be spent on the actual utilization of the data, e. g., building analytical models. In most scenarios, however, structural metadata is not given and must be extracted first. Therefore, efficient data profiling methods are highly desirable. Data profiling is a computationally expensive problem; in fact, most dependency discovery problems entail search spaces that grow exponentially in the number of attributes. To this end, this thesis introduces novel discovery algorithms for various types of data dependencies - namely inclusion dependencies, conditional inclusion dependencies, partial functional dependencies, and partial unique column combinations - that considerably improve over state-of-the-art algorithms in terms of efficiency and that scale to datasets that cannot be processed by existing algorithms. The key to those improvements are not only algorithmic innovations, such as novel pruning rules or traversal strategies, but also algorithm designs tailored for distributed execution. While distributed data profiling has been mostly neglected by previous works, it is a logical consequence on the face of recent hardware trends and the computational hardness of dependency discovery. To demonstrate the utility of data profiling for data management, this thesis furthermore presents Metacrate, a database for structural metadata. Its salient features are its flexible data model, the capability to integrate various kinds of structural metadata, and its rich metadata analytics library. We show how to perform a data anamnesis of unknown, complex datasets based on this technology. In particular, we describe in detail how to reconstruct the schemata and assess their quality as part of the data anamnesis. The data profiling algorithms and Metacrate have been carefully implemented, integrated with the Metanome data profiling tool, and are available as free software. In that way, we intend to allow for easy repeatability of our research results and also provide them for actual usage in real-world data-related projects.},
  language  = {en}
}
@phdthesis{Klimke2018,
  author    = {Klimke, Jan},
  title     = {Web-based provisioning and application of large-scale virtual 3D city models},
  doi       = {10.25932/publishup-42805},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-428053},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 141},
  year      = {2018},
  abstract  = {Virtual 3D city models represent and integrate a variety of spatial data and georeferenced data related to urban areas. With the help of improved remote-sensing technology, official 3D cadastral data, open data or geodata crowdsourcing, the quantity and availability of such data are constantly expanding and its quality is ever improving for many major cities and metropolitan regions. There are numerous fields of applications for such data, including city planning and development, environmental analysis and simulation, disaster and risk management, navigation systems, and interactive city maps. The dissemination and the interactive use of virtual 3D city models represent key technical functionality required by nearly all corresponding systems, services, and applications. The size and complexity of virtual 3D city models, their management, their handling, and especially their visualization represent challenging tasks. For example, mobile applications can hardly handle these models due to their massive data volume and data heterogeneity. Therefore, the efficient usage of all computational resources (e.g., storage, processing power, main memory, and graphics hardware, etc.) is a key requirement for software engineering in this field. Common approaches are based on complex clients that require the 3D model data (e.g., 3D meshes and 2D textures) to be transferred to them and that then render those received 3D models. However, these applications have to implement most stages of the visualization pipeline on client side. Thus, as high-quality 3D rendering processes strongly depend on locally available computer graphics resources, software engineering faces the challenge of building robust cross-platform client implementations. Web-based provisioning aims at providing a service-oriented software architecture that consists of tailored functional components for building web-based and mobile applications that manage and visualize virtual 3D city models. This thesis presents corresponding concepts and techniques for web-based provisioning of virtual 3D city models. In particular, it introduces services that allow us to efficiently build applications for virtual 3D city models based on a fine-grained service concept. The thesis covers five main areas: 1. A Service-Based Concept for Image-Based Provisioning of Virtual 3D City Models It creates a frame for a broad range of services related to the rendering and image-based dissemination of virtual 3D city models. 2. 3D Rendering Service for Virtual 3D City Models This service provides efficient, high-quality 3D rendering functionality for virtual 3D city models. In particular, it copes with requirements such as standardized data formats, massive model texturing, detailed 3D geometry, access to associated feature data, and non-assumed frame-to-frame coherence for parallel service requests. In addition, it supports thematic and artistic styling based on an expandable graphics effects library. 3. Layered Map Service for Virtual 3D City Models It generates a map-like representation of virtual 3D city models using an oblique view. It provides high visual quality, fast initial loading times, simple map-based interaction and feature data access. Based on a configurable client framework, mobile and web-based applications for virtual 3D city models can be created easily. 4. Video Service for Virtual 3D City Models It creates and synthesizes videos from virtual 3D city models. Without requiring client-side 3D rendering capabilities, users can create camera paths by a map-based user interface, configure scene contents, styling, image overlays, text overlays, and their transitions. The service significantly reduces the manual effort typically required to produce such videos. The videos can automatically be updated when the underlying data changes. 5. Service-Based Camera Interaction It supports task-based 3D camera interactions, which can be integrated seamlessly into service-based visualization applications. It is demonstrated how to build such web-based interactive applications for virtual 3D city models using this camera service. These contributions provide a framework for design, implementation, and deployment of future web-based applications, systems, and services for virtual 3D city models. The approach shows how to decompose the complex, monolithic functionality of current 3D geovisualization systems into independently designed, implemented, and operated service- oriented units. In that sense, this thesis also contributes to microservice architectures for 3D geovisualization systems—a key challenge of today's IT systems engineering to build scalable IT solutions.},
  language  = {en}
}
@phdthesis{Gruetze2018,
  author    = {Gr{\"u}tze, Toni},
  title     = {Adding value to text with user-generated content},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ii, 114},
  year      = {2018},
  abstract  = {In recent years, the ever-growing amount of documents on the Web as well as in closed systems for private or business contexts led to a considerable increase of valuable textual information about topics, events, and entities. It is a truism that the majority of information (i.e., business-relevant data) is only available in unstructured textual form. The text mining research field comprises various practice areas that have the common goal of harvesting high-quality information from textual data. These information help addressing users' information needs. In this thesis, we utilize the knowledge represented in user-generated content (UGC) originating from various social media services to improve text mining results. These social media platforms provide a plethora of information with varying focuses. In many cases, an essential feature of such platforms is to share relevant content with a peer group. Thus, the data exchanged in these communities tend to be focused on the interests of the user base. The popularity of social media services is growing continuously and the inherent knowledge is available to be utilized. We show that this knowledge can be used for three different tasks. Initially, we demonstrate that when searching persons with ambiguous names, the information from Wikipedia can be bootstrapped to group web search results according to the individuals occurring in the documents. We introduce two models and different means to handle persons missing in the UGC source. We show that the proposed approaches outperform traditional algorithms for search result clustering. Secondly, we discuss how the categorization of texts according to continuously changing community-generated folksonomies helps users to identify new information related to their interests. We specifically target temporal changes in the UGC and show how they influence the quality of different tag recommendation approaches. Finally, we introduce an algorithm to attempt the entity linking problem, a necessity for harvesting entity knowledge from large text collections. The goal is the linkage of mentions within the documents with their real-world entities. A major focus lies on the efficient derivation of coherent links. For each of the contributions, we provide a wide range of experiments on various text corpora as well as different sources of UGC. The evaluation shows the added value that the usage of these sources provides and confirms the appropriateness of leveraging user-generated content to serve different information needs.},
  language  = {en}
}