@article{Opel2015,
  author    = {Opel, Simone},
  title     = {On the Way to a "General Model of Contextualised Computer Science Education"},
  series = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  journal   = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  number    = {7},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82953},
  pages     = {397 -- 400},
  year      = {2015},
  language  = {en}
}
@article{Ohrndorf2015,
  author    = {Ohrndorf, Laura},
  title     = {Assignments in Computer Science Education},
  series = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  journal   = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  number    = {7},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82868},
  pages     = {327 -- 333},
  year      = {2015},
  abstract  = {In this paper we describe the recent state of our research project concerning computer science teachers' knowledge on students' cognition. We did a comprehensive analysis of textbooks, curricula and other resources, which give teachers guidance to formulate assignments. In comparison to other subjects there are only a few concepts and strategies taught to prospective computer science teachers in university. We summarize them and given an overview on our empirical approach to measure this knowledge.},
  language  = {en}
}
@article{NylenDoerge2013,
  author    = {Nyl{\´e}n, Aletta and D{\"o}rge, Christina},
  title     = {Using competencies to structure scientific writing education},
  series = {Commentarii informaticae didacticae : (CID)},
  journal   = {Commentarii informaticae didacticae : (CID)},
  number    = {5},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64851},
  pages     = {33 -- 44},
  year      = {2013},
  abstract  = {Scientific writing is an important skill for computer science and computer engineering professionals. In this paper we present a writing concept across the curriculum program directed towards scientific writing. The program is built around a hierarchy of learning outcomes. The hierarchy is constructed through analyzing the learning outcomes in relation to competencies that are needed to fulfill them.},
  language  = {en}
}
@article{Noack2014,
  author    = {Noack, Franziska},
  title     = {CREADED: Colored-Relief application for digital elevation data},
  series = {Process design for natural scientists: an agile model-driven approach},
  journal   = {Process design for natural scientists: an agile model-driven approach},
  number    = {500},
  publisher = {Springer},
  address   = {Berlin},
  isbn      = {978-3-662-45005-5},
  issn      = {1865-0929},
  pages     = {186 -- 199},
  year      = {2014},
  abstract  = {In the geoinformatics field, remote sensing data is often used for analyzing the characteristics of the current investigation area. This includes DEMs, which are simple raster grids containing grey scales representing the respective elevation values. The project CREADED that is presented in this paper aims at making these monochrome raster images more significant and more intuitively interpretable. For this purpose, an executable interactive model for creating a colored and relief-shaded Digital Elevation Model (DEM) has been designed using the jABC framework. The process is based on standard jABC-SIBs and SIBs that provide specific GIS functions, which are available as Web services, command line tools and scripts.},
  language  = {en}
}
@phdthesis{Mueller2016,
  author    = {Mueller, Stefanie},
  title     = {Interacting with personal fabrication devices},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-100908},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxi, 108},
  year      = {2016},
  abstract  = {Personal fabrication tools, such as 3D printers, are on the way of enabling a future in which non-technical users will be able to create custom objects. However, while the hardware is there, the current interaction model behind existing design tools is not suitable for non-technical users. Today, 3D printers are operated by fabricating the object in one go, which tends to take overnight due to the slow 3D printing technology. Consequently, the current interaction model requires users to think carefully before printing as every mistake may imply another overnight print. Planning every step ahead, however, is not feasible for non-technical users as they lack the experience to reason about the consequences of their design decisions. In this dissertation, we propose changing the interaction model around personal fabrication tools to better serve this user group. We draw inspiration from personal computing and argue that the evolution of personal fabrication may resemble the evolution of personal computing: Computing started with machines that executed a program in one go before returning the result to the user. By decreasing the interaction unit to single requests, turn-taking systems such as the command line evolved, which provided users with feedback after every input. Finally, with the introduction of direct-manipulation interfaces, users continuously interacted with a program receiving feedback about every action in real-time. In this dissertation, we explore whether these interaction concepts can be applied to personal fabrication as well. We start with fabricating an object in one go and investigate how to tighten the feedback-cycle on an object-level: We contribute a method called low-fidelity fabrication, which saves up to 90\% fabrication time by creating objects as fast low-fidelity previews, which are sufficient to evaluate key design aspects. Depending on what is currently being tested, we propose different conversions that enable users to focus on different parts: faBrickator allows for a modular design in the early stages of prototyping; when users move on WirePrint allows quickly testing an object's shape, while Platener allows testing an object's technical function. We present an interactive editor for each technique and explain the underlying conversion algorithms. By interacting on smaller units, such as a single element of an object, we explore what it means to transition from systems that fabricate objects in one go to turn-taking systems. We start with a 2D system called constructable: Users draw with a laser pointer onto the workpiece inside a laser cutter. The drawing is captured with an overhead camera. As soon as the the user finishes drawing an element, such as a line, the constructable system beautifies the path and cuts it--resulting in physical output after every editing step. We extend constructable towards 3D editing by developing a novel laser-cutting technique for 3D objects called LaserOrigami that works by heating up the workpiece with the defocused laser until the material becomes compliant and bends down under gravity. While constructable and LaserOrigami allow for fast physical feedback, the interaction is still best described as turn-taking since it consists of two discrete steps: users first create an input and afterwards the system provides physical output. By decreasing the interaction unit even further to a single feature, we can achieve real-time physical feedback: Input by the user and output by the fabrication device are so tightly coupled that no visible lag exists. This allows us to explore what it means to transition from turn-taking interfaces, which only allow exploring one option at a time, to direct manipulation interfaces with real-time physical feedback, which allow users to explore the entire space of options continuously with a single interaction. We present a system called FormFab, which allows for such direct control. FormFab is based on the same principle as LaserOrigami: It uses a workpiece that when warmed up becomes compliant and can be reshaped. However, FormFab achieves the reshaping not based on gravity, but through a pneumatic system that users can control interactively. As users interact, they see the shape change in real-time. We conclude this dissertation by extrapolating the current evolution into a future in which large numbers of people use the new technology to create objects. We see two additional challenges on the horizon: sustainability and intellectual property. We investigate sustainability by demonstrating how to print less and instead patch physical objects. We explore questions around intellectual property with a system called Scotty that transfers objects without creating duplicates, thereby preserving the designer's copyright.},
  language  = {en}
}
@article{Micheuz2015,
  author    = {Micheuz, Peter},
  title     = {Discussing Educational Standards for Digital Competence and/or Informatics Education at Lower Secondary Level},
  series = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  journal   = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  number    = {7},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-83008},
  pages     = {425 -- 431},
  year      = {2015},
  abstract  = {Participants of this workshop will be confronted exemplarily with a considerable inconsistency of global Informatics education at lower secondary level. More importantly, they are invited to contribute actively on this issue in form of short case studies of their countries. Until now, very few countries have been successful in implementing Informatics or Computing at primary and lower secondary level. The spectrum from digital literacy to informatics, particularly as a discipline in its own right, has not really achieved a breakthrough and seems to be underrepresented for these age groups. The goal of this workshop is not only to discuss the anamnesis and diagnosis of this fragmented field, but also to discuss and suggest viable forms of therapy in form of setting educational standards. Making visible good practices in some countries and comparing successful approaches are rewarding tasks for this workshop. Discussing and defining common educational standards on a transcontinental level for the age group of 14 to 15 years old students in a readable, assessable and acceptable form should keep the participants of this workshop active beyond the limited time at the workshop.},
  language  = {en}
}
@phdthesis{Menzel2011,
  author    = {Menzel, Michael},
  title     = {Model-driven security in service-oriented architectures : leveraging security patterns to transform high-level security requirements to technical policies},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59058},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Service-oriented Architectures (SOA) facilitate the provision and orchestration of business services to enable a faster adoption to changing business demands. Web Services provide a technical foundation to implement this paradigm on the basis of XML-messaging. However, the enhanced flexibility of message-based systems comes along with new threats and risks. To face these issues, a variety of security mechanisms and approaches is supported by the Web Service specifications. The usage of these security mechanisms and protocols is configured by stating security requirements in security policies. However, security policy languages for SOA are complex and difficult to create due to the expressiveness of these languages. To facilitate and simplify the creation of security policies, this thesis presents a model-driven approach that enables the generation of complex security policies on the basis of simple security intentions. SOA architects can specify these intentions in system design models and are not required to deal with complex technical security concepts. The approach introduced in this thesis enables the enhancement of any system design modelling languages - for example FMC or BPMN - with security modelling elements. The syntax, semantics, and notion of these elements is defined by our security modelling language SecureSOA. The metamodel of this language provides extension points to enable the integration into system design modelling languages. In particular, this thesis demonstrates the enhancement of FMC block diagrams with SecureSOA. To enable the model-driven generation of security policies, a domain-independent policy model is introduced in this thesis. This model provides an abstraction layer for security policies. Mappings are used to perform the transformation from our model to security policy languages. However, expert knowledge is required to generate instances of this model on the basis of simple security intentions. Appropriate security mechanisms, protocols and options must be chosen and combined to fulfil these security intentions. In this thesis, a formalised system of security patterns is used to represent this knowledge and to enable an automated transformation process. Moreover, a domain-specific language is introduced to state security patterns in an accessible way. On the basis of this language, a system of security configuration patterns is provided to transform security intentions related to data protection and identity management. The formal semantics of the security pattern language enable the verification of the transformation process introduced in this thesis and prove the correctness of the pattern application. Finally, our SOA Security LAB is presented that demonstrates the application of our model-driven approach to facilitate a dynamic creation, configuration, and execution of secure Web Service-based composed applications.},
  language  = {en}
}
@phdthesis{Makowski2021,
  author    = {Makowski, Silvia},
  title     = {Discriminative Models for Biometric Identification using Micro- and Macro-Movements of the Eyes},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 91},
  year      = {2021},
  abstract  = {Human visual perception is an active process. Eye movements either alternate between fixations and saccades or follow a smooth pursuit movement in case of moving targets. Besides these macroscopic gaze patterns, the eyes perform involuntary micro-movements during fixations which are commonly categorized into micro-saccades, drift and tremor. Eye movements are frequently studied in cognitive psychology, because they reflect a complex interplay of perception, attention and oculomotor control. A common insight of psychological research is that macro-movements are highly individual. Inspired by this finding, there has been a considerable amount of prior research on oculomotoric biometric identification. However, the accuracy of known approaches is too low and the time needed for identification is too long for any practical application. This thesis explores discriminative models for the task of biometric identification. Discriminative models optimize a quality measure of the predictions and are usually superior to generative approaches in discriminative tasks. However, using discriminative models requires to select a suitable form of data representation for sequential eye gaze data; i.e., by engineering features or constructing a sequence kernel and the performance of the classification model strongly depends on the data representation. We study two fundamentally different ways of representing eye gaze within a discriminative framework. In the first part of this thesis, we explore the integration of data and psychological background knowledge in the form of generative models to construct representations. To this end, we first develop generative statistical models of gaze behavior during reading and scene viewing that account for viewer-specific distributional properties of gaze patterns. In a second step, we develop a discriminative identification model by deriving Fisher kernel functions from these and several baseline models. We find that an SVM with Fisher kernel is able to reliably identify users based on their eye gaze during reading and scene viewing. However, since the generative models are constrained to use low-frequency macro-movements, they discard a significant amount of information contained in the raw eye tracking signal at a high cost: identification requires about one minute of input recording, which makes it inapplicable for real world biometric systems. In the second part of this thesis, we study a purely data-driven modeling approach. Here, we aim at automatically discovering the individual pattern hidden in the raw eye tracking signal. To this end, we develop a deep convolutional neural network DeepEyedentification that processes yaw and pitch gaze velocities and learns a representation end-to-end. Compared to prior work, this model increases the identification accuracy by one order of magnitude and the time to identification decreases to only seconds. The DeepEyedentificationLive model further improves upon the identification performance by processing binocular input and it also detects presentation-attacks. We find that by learning a representation, the performance of oculomotoric identification and presentation-attack detection can be driven close to practical relevance for biometric applications. Eye tracking devices with high sampling frequency and precision are expensive and the applicability of eye movement as a biometric feature heavily depends on cost of recording devices. In the last part of this thesis, we therefore study the requirements on data quality by evaluating the performance of the DeepEyedentificationLive network under reduced spatial and temporal resolution. We find that the method still attains a high identification accuracy at a temporal resolution of only 250 Hz and a precision of 0.03 degrees. Reducing both does not have an additive deteriorating effect.},
  language  = {en}
}
@article{MainaAngondiWaga2015,
  author    = {Maina, Anthony Gioko and Angondi, Enos Kiforo and Waga, Rosemary},
  title     = {How does the Implementation of a Literacy Learning Tool Kit influence Literacy Skill Acquisition?},
  series = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  journal   = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  number    = {7},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82856},
  pages     = {319 -- 326},
  year      = {2015},
  abstract  = {This study aimed at following how teachers transfer skills into results while using ABRA literacy software. This was done in the second part of the pilot study whose aim was to provide equity to control group teachers and students by exposing them to the ABRACADABRA treatment after the end of phase 1. This opportunity was used to follow the phase 1 teachers to see how the skills learned were being transformed into results. A standard three-day initial training and planning session on how to use ABRA to teach literacy was held at the beginning of each phase for ABRA teachers (phase 1 experimental and phase 2 delayed ABRA). Teachers were provided with teaching materials including a tentative ABRA curriculum developed to align with the Kenyan English Language requirements for year 1 and 3 students. Results showed that although there was no significant difference between the groups in vocabulary-related subscales which include word reading and meaning as well as sentence comprehension, students in ABRACADABRA classes improved their scores at a significantly higher rate than students in control classes in comprehension related scores. An average student in the ABRACADABRA group improved by 12 and 16 percentile points respectively compared to their counterparts in the control group.},
  language  = {en}
}
@phdthesis{Mahr2012,
  author    = {Mahr, Philipp},
  title     = {Resource efficient communication in network-based reconfigurable on-chip systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59914},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {The constantly growing capacity of reconfigurable devices allows simultaneous execution of complex applications on those devices. The mere diversity of applications deems it impossible to design an interconnection network matching the requirements of every possible application perfectly, leading to suboptimal performance in many cases. However, the architecture of the interconnection network is not the only aspect affecting performance of communication. The resource manager places applications on the device and therefore influences latency between communicating partners and overall network load. Communication protocols affect performance by introducing data and processing overhead putting higher load on the network and increasing resource demand. Approaching communication holistically not only considers the architecture of the interconnect, but communication-aware resource management, communication protocols and resource usage just as well. Incorporation of different parts of a reconfigurable system during design- and runtime and optimizing them with respect to communication demand results in more resource efficient communication. Extensive evaluation shows enhanced performance and flexibility, if communication on reconfigurable devices is regarded in a holistic fashion.},
  language  = {en}
}
@article{MagenheimSchubertSchapert2015,
  author    = {Magenheim, Johannes and Schubert, Sigrid and Schapert, Niclas},
  title     = {Modelling and Measurement of Competencies in Computer Science Education},
  series = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  journal   = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  number    = {7},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82592},
  pages     = {33 -- 57},
  year      = {2015},
  abstract  = {As a result of the Bologna reform of educational systems in Europe the outcome orientation of learning processes, competence-oriented descriptions of the curricula and competence-oriented assessment procedures became standard also in Computer Science Education (CSE). The following keynote addresses important issues of shaping a CSE competence model especially in the area of informatics system comprehension and object-oriented modelling. Objectives and research methodology of the project MoKoM (Modelling and Measurement of Competences in CSE) are explained. Firstly, the CSE competence model was derived based on theoretical concepts and then secondly the model was empirically examined and refined using expert interviews. Furthermore, the paper depicts the development and examination of a competence measurement instrument, which was derived from the competence model. Therefore, the instrument was applied to a large sample of students at the gymnasium's upper class level. Subsequently, efforts to develop a competence level model, based on the retrieved empirical results and on expert ratings are presented. Finally, further demands on research on competence modelling in CSE will be outlined.},
  language  = {en}
}
@article{MagenheimNellesNeugebaueretal.2015,
  author    = {Magenheim, Johannes and Nelles, Wolfgang and Neugebauer, Jonas and Ohrndorf, Laura and Schaper, Niclas and Schubert, Sigrid},
  title     = {Expert Rating of Competence Levels in Upper Secondary Computer Science Education},
  series = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  journal   = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  number    = {7},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82683},
  pages     = {199 -- 216},
  year      = {2015},
  abstract  = {In the project MoKoM, which is funded by the German Research Foundation (DFG) from 2008 to 2012, a test instrument measuring students' competences in computer science was developed. This paper presents the results of an expert rating of the levels of students' competences done for the items of the instrument. At first we will describe the difficulty-relevant features that were used for the evaluation. These were deduced from computer science, psychological and didactical findings and resources. Potentials and desiderata of this research method are discussed further on. Finally we will present our conclusions on the results and give an outlook on further steps.},
  language  = {en}
}
@article{LutherTiberiusBrem2020,
  author    = {Luther, Laura and Tiberius, Victor and Brem, Alexander},
  title     = {User experience (UX) in business, management, and psychology},
  series = {Multimodal technologies and interaction : open access journal},
  volume    = {4},
  journal   = {Multimodal technologies and interaction : open access journal},
  number    = {2},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2414-4088},
  doi       = {10.3390/mti4020018},
  pages     = {19},
  year      = {2020},
  abstract  = {User Experience (UX) describes the holistic experience of a user before, during, and after interaction with a platform, product, or service. UX adds value and attraction to their sole functionality and is therefore highly relevant for firms. The increased interest in UX has produced a vast amount of scholarly research since 1983. The research field is, therefore, complex and scattered. Conducting a bibliometric analysis, we aim at structuring the field quantitatively and rather abstractly. We employed citation analyses, co-citation analyses, and content analyses to evaluate productivity and impact of extant research. We suggest that future research should focus more on business and management related topics.},
  language  = {en}
}
@misc{Lunemann2006,
  type      = {Master Thesis},
  author    = {Lunemann, Carolin},
  title     = {Quantum cryptography : security analysis of multiuser quantum communication with embedded authentication},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12756},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Three quantum cryptographic protocols of multiuser quantum networks with embedded authentication, allowing quantum key distribution or quantum direct communication, are discussed in this work. The security of the protocols against different types of attacks is analysed with a focus on various impersonation attacks and the man-in-the-middle attack. On the basis of the security analyses several improvements are suggested and implemented in order to adjust the investigated vulnerabilities. Furthermore, the impact of the eavesdropping test procedure on impersonation attacks is outlined. The framework of a general eavesdropping test is proposed to provide additional protection against security risks in impersonation attacks.},
  language  = {en}
}
@article{Lis2014,
  author    = {Lis, Monika},
  title     = {Constructing a Phylogenetic Tree},
  series = {Process Design for Natural Scientists: an agile model-driven approach},
  journal   = {Process Design for Natural Scientists: an agile model-driven approach},
  number    = {500},
  editor    = {Lambrecht, Anna-Lena and Margaria, Tiziana},
  publisher = {Springer Verlag},
  address   = {Berlin},
  isbn      = {978-3-662-45005-5},
  issn      = {1865-0929},
  pages     = {101 -- 109},
  year      = {2014},
  abstract  = {In this project I constructed a workflow that takes a DNA sequence as input and provides a phylogenetic tree, consisting of the input sequence and other sequences which were found during a database search. In this phylogenetic tree the sequences are arranged depending on similarities. In bioinformatics, constructing phylogenetic trees is often used to explore the evolutionary relationships of genes or organisms and to understand the mechanisms of evolution itself.},
  language  = {en}
}
@phdthesis{Lindauer2014,
  author    = {Lindauer, T. Marius},
  title     = {Algorithm selection, scheduling and configuration of Boolean constraint solvers},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-71260},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ii, 130},
  year      = {2014},
  abstract  = {Boolean constraint solving technology has made tremendous progress over the last decade, leading to industrial-strength solvers, for example, in the areas of answer set programming (ASP), the constraint satisfaction problem (CSP), propositional satisfiability (SAT) and satisfiability of quantified Boolean formulas (QBF). However, in all these areas, there exist multiple solving strategies that work well on different applications; no strategy dominates all other strategies. Therefore, no individual solver shows robust state-of-the-art performance in all kinds of applications. Additionally, the question arises how to choose a well-performing solving strategy for a given application; this is a challenging question even for solver and domain experts. One way to address this issue is the use of portfolio solvers, that is, a set of different solvers or solver configurations. We present three new automatic portfolio methods: (i) automatic construction of parallel portfolio solvers (ACPP) via algorithm configuration,(ii) solving the \$NP\$-hard problem of finding effective algorithm schedules with Answer Set Programming (aspeed), and (iii) a flexible algorithm selection framework (claspfolio2) allowing for fair comparison of different selection approaches. All three methods show improved performance and robustness in comparison to individual solvers on heterogeneous instance sets from many different applications. Since parallel solvers are important to effectively solve hard problems on parallel computation systems (e.g., multi-core processors), we extend all three approaches to be effectively applicable in parallel settings. We conducted extensive experimental studies different instance sets from ASP, CSP, MAXSAT, Operation Research (OR), SAT and QBF that indicate an improvement in the state-of-the-art solving heterogeneous instance sets. Last but not least, from our experimental studies, we deduce practical advice regarding the question when to apply which of our methods.},
  language  = {en}
}
@phdthesis{Linckels2008,
  author    = {Linckels, Serge},
  title     = {An e-librarian service : supporting explorative learning by a description logics based semantic retrieval tool},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17452},
  school      = {Universit{\"a}t Potsdam},
  year      = {2008},
  abstract  = {Although educational content in electronic form is increasing dramatically, its usage in an educational environment is poor, mainly due to the fact that there is too much of (unreliable) redundant, and not relevant information. Finding appropriate answers is a rather difficult task being reliant on the user filtering of the pertinent information from the noise. Turning knowledge bases like the online tele-TASK archive into useful educational resources requires identifying correct, reliable, and "machine-understandable" information, as well as developing simple but efficient search tools with the ability to reason over this information. Our vision is to create an E-Librarian Service, which is able to retrieve multimedia resources from a knowledge base in a more efficient way than by browsing through an index, or by using a simple keyword search. In our E-Librarian Service, the user can enter his question in a very simple and human way; in natural language (NL). Our premise is that more pertinent results would be retrieved if the search engine understood the sense of the user's query. The returned results are then logical consequences of an inference rather than of keyword matchings. Our E-Librarian Service does not return the answer to the user's question, but it retrieves the most pertinent document(s), in which the user finds the answer to his/her question. Among all the documents that have some common information with the user query, our E-Librarian Service identifies the most pertinent match(es), keeping in mind that the user expects an exhaustive answer while preferring a concise answer with only little or no information overhead. Also, our E-Librarian Service always proposes a solution to the user, even if the system concludes that there is no exhaustive answer. Our E-Librarian Service was implemented prototypically in three different educational tools. A first prototype is CHESt (Computer History Expert System); it has a knowledge base with 300 multimedia clips that cover the main events in computer history. A second prototype is MatES (Mathematics Expert System); it has a knowledge base with 115 clips that cover the topic of fractions in mathematics for secondary school w.r.t. the official school programme. All clips were recorded mainly by pupils. The third and most advanced prototype is the "Lecture Butler's E-Librarain Service"; it has a Web service interface to respect a service oriented architecture (SOA), and was developed in the context of the Web-University project at the Hasso-Plattner-Institute (HPI). Two major experiments in an educational environment - at the Lyc{\´e}e Technique Esch/Alzette in Luxembourg - were made to test the pertinence and reliability of our E-Librarian Service as a complement to traditional courses. The first experiment (in 2005) was made with CHESt in different classes, and covered a single lesson. The second experiment (in 2006) covered a period of 6 weeks of intensive use of MatES in one class. There was no classical mathematics lesson where the teacher gave explanations, but the students had to learn in an autonomous and exploratory way. They had to ask questions to the E-Librarian Service just the way they would if there was a human teacher.},
  subject      = {Terminologische Logik},
  language  = {en}
}
@misc{LifschitzSchaubWoltran2018,
  author    = {Lifschitz, Vladimir and Schaub, Torsten H. and Woltran, Stefan},
  title     = {Interview with Vladimir Lifschitz},
  series = {K{\"u}nstliche Intelligenz},
  volume    = {32},
  journal   = {K{\"u}nstliche Intelligenz},
  number    = {2-3},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0933-1875},
  doi       = {10.1007/s13218-018-0552-x},
  pages     = {213 -- 218},
  year      = {2018},
  abstract  = {This interview with Vladimir Lifschitz was conducted by Torsten Schaub at the University of Texas at Austin in August 2017. The question set was compiled by Torsten Schaub and Stefan Woltran.},
  language  = {en}
}
@article{LewinMcNicol2015,
  author    = {Lewin, Cathy and McNicol, Sarah},
  title     = {Supporting the Development of 21st Century Skills through ICT},
  series = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  journal   = {KEYCIT 2014 - Key Competencies in Informatics and ICT},
  number    = {7},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  issn      = {1868-0844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82672},
  pages     = {181 -- 198},
  year      = {2015},
  abstract  = {The growing impact of globalisation and the development of a 'knowledge society' have led many to argue that 21st century skills are essential for life in twenty-first century society and that ICT is central to their development. This paper describes how 21st century skills, in particular digital literacy, critical thinking, creativity, communication and collaboration skills, have been conceptualised and embedded in the resources developed for teachers in iTEC, a four-year, European project. The effectiveness of this approach is considered in light of the data collected through the evaluation of the pilots, which considers both the potential benefits of using technology to support the development of 21st century skills, but also the challenges of doing so. Finally, the paper discusses the learning support systems required in order to transform pedagogies and embed 21st century skills. It is argued that support is required in standards and assessment; curriculum and instruction; professional development; and learning environments.},
  language  = {en}
}
@phdthesis{Lanfermann2002,
  author    = {Lanfermann, Gerd},
  title     = {Nomadic migration : a service environment for autonomic computing on the Grid},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000773},
  school      = {Universit{\"a}t Potsdam},
  year      = {2002},
  abstract  = {In den vergangenen Jahren ist es zu einer dramatischen Vervielfachung der verf{\"u}gbaren Rechenzeit gekommen. Diese 'Grid Ressourcen' stehen jedoch nicht als kontinuierlicher Strom zur Verf{\"u}gung, sondern sind {\"u}ber verschiedene Maschinentypen, Plattformen und Betriebssysteme verteilt, die jeweils durch Netzwerke mit fluktuierender Bandbreite verbunden sind. Es wird f{\"u}r Wissenschaftler zunehmend schwieriger, die verf{\"u}gbaren Ressourcen f{\"u}r ihre Anwendungen zu nutzen. Wir glauben, dass intelligente, selbstbestimmende Applikationen in der Lage sein sollten, ihre Ressourcen in einer dynamischen und heterogenen Umgebung selbst zu w{\"a}hlen: Migrierende Applikationen suchen eine neue Ressource, wenn die alte aufgebraucht ist. 'Spawning'-Anwendungen lassen Algorithmen auf externen Maschinen laufen, um die Hauptanwendung zu beschleunigen. Applikationen werden neu gestartet, sobald ein Absturz endeckt wird. Alle diese Verfahren k{\"o}nnen ohne menschliche Interaktion erfolgen. Eine verteilte Rechenumgebung besitzt eine nat{\"u}rliche Unverl{\"a}sslichkeit. Jede Applikation, die mit einer solchen Umgebung interagiert, muss auf die gest{\"o}rten Komponenten reagieren k{\"o}nnen: schlechte Netzwerkverbindung, abst{\"u}rzende Maschinen, fehlerhafte Software. Wir konstruieren eine verl{\"a}ssliche Serviceinfrastruktur, indem wir der Serviceumgebung eine 'Peer-to-Peer'-Topology aufpr{\"a}gen. Diese "Grid Peer Service" Infrastruktur beinhaltet Services wie Migration und Spawning, als auch Services zum Starten von Applikationen, zur Datei{\"u}bertragung und Auswahl von Rechenressourcen. Sie benutzt existierende Gridtechnologie wo immer m{\"o}glich, um ihre Aufgabe durchzuf{\"u}hren. Ein Applikations-Information- Server arbeitet als generische Registratur f{\"u}r alle Teilnehmer in der Serviceumgebung. Die Serviceumgebung, die wir entwickelt haben, erlaubt es Applikationen z.B. eine Relokationsanfrage an einen Migrationsserver zu stellen. Der Server sucht einen neuen Computer, basierend auf den {\"u}bermittelten Ressourcen-Anforderungen. Er transferiert den Statusfile des Applikation zu der neuen Maschine und startet die Applikation neu. Obwohl das umgebende Ressourcensubstrat nicht kontinuierlich ist, k{\"o}nnen wir kontinuierliche Berechnungen auf Grids ausf{\"u}hren, indem wir die Applikation migrieren. Wir zeigen mit realistischen Beispielen, wie sich z.B. ein traditionelles Genom-Analyse-Programm leicht modifizieren l{\"a}sst, um selbstbestimmte Migrationen in dieser Serviceumgebung durchzuf{\"u}hren.},
  subject      = {Peer-to-Peer-Netz ; GRID computing ; Zuverl{\"a}ssigkeit ; Web Services ; Betriebsmittelverwaltung ; Migration},
  language  = {en}
}