@book{CalmezHesseSiegmundetal.2013, author = {Calmez, Conrad and Hesse, Hubert and Siegmund, Benjamin and Stamm, Sebastian and Thomschke, Astrid and Hirschfeld, Robert and Ingalls, Dan and Lincke, Jens}, title = {Explorative authoring of Active Web content in a mobile environment}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-232-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64054}, publisher = {Universit{\"a}t Potsdam}, pages = {132}, year = {2013}, abstract = {Developing rich Web applications can be a complex job - especially when it comes to mobile device support. Web-based environments such as Lively Webwerkstatt can help developers implement such applications by making the development process more direct and interactive. Further the process of developing software is collaborative which creates the need that the development environment offers collaboration facilities. This report describes extensions of the webbased development environment Lively Webwerkstatt such that it can be used in a mobile environment. The extensions are collaboration mechanisms, user interface adaptations but as well event processing and performance measuring on mobile devices.}, language = {en} } @book{DraisbachNaumannSzottetal.2012, author = {Draisbach, Uwe and Naumann, Felix and Szott, Sascha and Wonneberg, Oliver}, title = {Adaptive windows for duplicate detection}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-143-1}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53007}, publisher = {Universit{\"a}t Potsdam}, pages = {41}, year = {2012}, abstract = {Duplicate detection is the task of identifying all groups of records within a data set that represent the same real-world entity, respectively. This task is difficult, because (i) representations might differ slightly, so some similarity measure must be defined to compare pairs of records and (ii) data sets might have a high volume making a pair-wise comparison of all records infeasible. To tackle the second problem, many algorithms have been suggested that partition the data set and compare all record pairs only within each partition. One well-known such approach is the Sorted Neighborhood Method (SNM), which sorts the data according to some key and then advances a window over the data comparing only records that appear within the same window. We propose several variations of SNM that have in common a varying window size and advancement. The general intuition of such adaptive windows is that there might be regions of high similarity suggesting a larger window size and regions of lower similarity suggesting a smaller window size. We propose and thoroughly evaluate several adaption strategies, some of which are provably better than the original SNM in terms of efficiency (same results with fewer comparisons).}, language = {en} } @book{DyckGiese2017, author = {Dyck, Johannes and Giese, Holger}, title = {k-Inductive invariant checking for graph transformation systems}, number = {119}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-406-7}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-397044}, publisher = {Universit{\"a}t Potsdam}, pages = {45}, year = {2017}, abstract = {While offering significant expressive power, graph transformation systems often come with rather limited capabilities for automated analysis, particularly if systems with many possible initial graphs and large or infinite state spaces are concerned. One approach that tries to overcome these limitations is inductive invariant checking. However, the verification of inductive invariants often requires extensive knowledge about the system in question and faces the approach-inherent challenges of locality and lack of context. To address that, this report discusses k-inductive invariant checking for graph transformation systems as a generalization of inductive invariants. The additional context acquired by taking multiple (k) steps into account is the key difference to inductive invariant checking and is often enough to establish the desired invariants without requiring the iterative development of additional properties. To analyze possibly infinite systems in a finite fashion, we introduce a symbolic encoding for transformation traces using a restricted form of nested application conditions. As its central contribution, this report then presents a formal approach and algorithm to verify graph constraints as k-inductive invariants. We prove the approach's correctness and demonstrate its applicability by means of several examples evaluated with a prototypical implementation of our algorithm.}, language = {en} } @book{DyckGiese2015, author = {Dyck, Johannes and Giese, Holger}, title = {Inductive invariant checking with partial negative application conditions}, number = {98}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-333-6}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-77748}, publisher = {Universit{\"a}t Potsdam}, pages = {43}, year = {2015}, abstract = {Graph transformation systems are a powerful formal model to capture model transformations or systems with infinite state space, among others. However, this expressive power comes at the cost of rather limited automated analysis capabilities. The general case of unbounded many initial graphs or infinite state spaces is only supported by approaches with rather limited scalability or expressiveness. In this report we improve an existing approach for the automated verification of inductive invariants for graph transformation systems. By employing partial negative application conditions to represent and check many alternative conditions in a more compact manner, we can check examples with rules and constraints of substantially higher complexity. We also substantially extend the expressive power by supporting more complex negative application conditions and provide higher accuracy by employing advanced implication checks. The improvements are evaluated and compared with another applicable tool by considering three case studies.}, language = {en} } @book{DyckGieseLambers2017, author = {Dyck, Johannes and Giese, Holger and Lambers, Leen}, title = {Automatic verification of behavior preservation at the transformation level for relational model transformation}, number = {112}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-391-6}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-100279}, publisher = {Universit{\"a}t Potsdam}, pages = {viii, 112}, year = {2017}, abstract = {The correctness of model transformations is a crucial element for model-driven engineering of high quality software. In particular, behavior preservation is the most important correctness property avoiding the introduction of semantic errors during the model-driven engineering process. Behavior preservation verification techniques either show that specific properties are preserved, or more generally and complex, they show some kind of behavioral equivalence or refinement between source and target model of the transformation. Both kinds of behavior preservation verification goals have been presented with automatic tool support for the instance level, i.e. for a given source and target model specified by the model transformation. However, up until now there is no automatic verification approach available at the transformation level, i.e. for all source and target models specified by the model transformation. In this report, we extend our results presented in [27] and outline a new sophisticated approach for the automatic verification of behavior preservation captured by bisimulation resp. simulation for model transformations specified by triple graph grammars and semantic definitions given by graph transformation rules. In particular, we show that the behavior preservation problem can be reduced to invariant checking for graph transformation and that the resulting checking problem can be addressed by our own invariant checker even for a complex example where a sequence chart is transformed into communicating automata. We further discuss today's limitations of invariant checking for graph transformation and motivate further lines of future work in this direction.}, language = {en} } @book{DuerschReinMattisetal.2022, author = {D{\"u}rsch, Falco and Rein, Patrick and Mattis, Toni and Hirschfeld, Robert}, title = {Learning from failure}, number = {145}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-528-6}, issn = {1613-5652}, doi = {10.25932/publishup-53755}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-537554}, publisher = {Universit{\"a}t Potsdam}, pages = {87}, year = {2022}, abstract = {Regression testing is a widespread practice in today's software industry to ensure software product quality. Developers derive a set of test cases, and execute them frequently to ensure that their change did not adversely affect existing functionality. As the software product and its test suite grow, the time to feedback during regression test sessions increases, and impedes programmer productivity: developers wait longer for tests to complete, and delays in fault detection render fault removal increasingly difficult. Test case prioritization addresses the problem of long feedback loops by reordering test cases, such that test cases of high failure probability run first, and test case failures become actionable early in the testing process. We ask, given test execution schedules reconstructed from publicly available data, to which extent can their fault detection efficiency improved, and which technique yields the most efficient test schedules with respect to APFD? To this end, we recover regression 6200 test sessions from the build log files of Travis CI, a popular continuous integration service, and gather 62000 accompanying changelists. We evaluate the efficiency of current test schedules, and examine the prioritization results of state-of-the-art lightweight, history-based heuristics. We propose and evaluate a novel set of prioritization algorithms, which connect software changes and test failures in a matrix-like data structure. Our studies indicate that the optimization potential is substantial, because the existing test plans score only 30\% APFD. The predictive power of past test failures proves to be outstanding: simple heuristics, such as repeating tests with failures in recent sessions, result in efficiency scores of 95\% APFD. The best-performing matrix-based heuristic achieves a similar score of 92.5\% APFD. In contrast to prior approaches, we argue that matrix-based techniques are useful beyond the scope of effective prioritization, and enable a number of use cases involving software maintenance. We validate our findings from continuous integration processes by extending a continuous testing tool within development environments with means of test prioritization, and pose further research questions. We think that our findings are suited to propel adoption of (continuous) testing practices, and that programmers' toolboxes should contain test prioritization as an existential productivity tool.}, language = {en} } @book{EichenrothReinHirschfeld2022, author = {Eichenroth, Friedrich and Rein, Patrick and Hirschfeld, Robert}, title = {Fast packrat parsing in a live programming environment}, series = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Digital Engineering an der Universit{\"a}t Potsdam}, journal = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Digital Engineering an der Universit{\"a}t Potsdam}, number = {135}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-503-3}, issn = {1613-5652}, doi = {10.25932/publishup-49124}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-491242}, publisher = {Universit{\"a}t Potsdam}, pages = {79}, year = {2022}, abstract = {Language developers who design domain-specific languages or new language features need a way to make fast changes to language definitions. Those fast changes require immediate feedback. Also, it should be possible to parse the developed languages quickly to handle extensive sets of code. Parsing expression grammars provides an easy to understand method for language definitions. Packrat parsing is a method to parse grammars of this kind, but this method is unable to handle left-recursion properly. Existing solutions either partially rewrite left-recursive rules and partly forbid them, or use complex extensions to packrat parsing that are hard to understand and cost-intensive. We investigated methods to make parsing as fast as possible, using easy to follow algorithms while not losing the ability to make fast changes to grammars. We focused our efforts on two approaches. One is to start from an existing technique for limited left-recursion rewriting and enhance it to work for general left-recursive grammars. The second approach is to design a grammar compilation process to find left-recursion before parsing, and in this way, reduce computational costs wherever possible and generate ready to use parser classes. Rewriting parsing expression grammars is a task that, if done in a general way, unveils a large number of cases such that any rewriting algorithm surpasses the complexity of other left-recursive parsing algorithms. Lookahead operators introduce this complexity. However, most languages have only little portions that are left-recursive and in virtually all cases, have no indirect or hidden left-recursion. This means that the distinction of left-recursive parts of grammars from components that are non-left-recursive holds great improvement potential for existing parsers. In this report, we list all the required steps for grammar rewriting to handle left-recursion, including grammar analysis, grammar rewriting itself, and syntax tree restructuring. Also, we describe the implementation of a parsing expression grammar framework in Squeak/Smalltalk and the possible interactions with the already existing parser Ohm/S. We quantitatively benchmarked this framework directing our focus on parsing time and the ability to use it in a live programming context. Compared with Ohm, we achieved massive parsing time improvements while preserving the ability to use our parser it as a live programming tool. The work is essential because, for one, we outlined the difficulties and complexity that come with grammar rewriting. Also, we removed the existing limitations that came with left-recursion by eliminating them before parsing.}, language = {en} } @book{EidSabbaghHeweltWeske2013, author = {Eid-Sabbagh, Rami-Habib and Hewelt, Marcin and Weske, Mathias}, title = {Business process architectures with multiplicities : transformation and correctness}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-257-5}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66780}, publisher = {Universit{\"a}t Potsdam}, pages = {18}, year = {2013}, abstract = {Business processes are instrumental to manage work in organisations. To study the interdependencies between business processes, Business Process Architectures have been introduced. These express trigger and message ow relations between business processes. When we investigate real world Business Process Architectures, we find complex interdependencies, involving multiple process instances. These aspects have not been studied in detail so far, especially concerning correctness properties. In this paper, we propose a modular transformation of BPAs to open nets for the analysis of behavior involving multiple business processes with multiplicities. For this purpose we introduce intermediary nets to portray semantics of multiplicity specifications. We evaluate our approach on a use case from the public sector.}, language = {en} } @book{FeinbubeRichterGerstenbergetal.2016, author = {Feinbube, Lena and Richter, Daniel and Gerstenberg, Sebastian and Siegler, Patrick and Haller, Angelo and Polze, Andreas}, title = {Software-Fehlerinjektion}, number = {109}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-386-2}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-97435}, publisher = {Universit{\"a}t Potsdam}, pages = {viii, 47}, year = {2016}, abstract = {Fehlerinjektion ist ein essentielles Werkzeug, um die Fehlertoleranz komplexer Softwaresysteme experimentell zu evaluieren. Wir berichten {\"u}ber das Seminar zum Thema Software-Fehlerinjektion, das am Fachgebiet f{\"u}r Betriebssysteme und Middleware am Hasso-Plattner-Institut der Universit{\"a}t Potsdam im Sommersemester 2015 stattfand. In dem Seminar ging es darum, verschiedene Fehlerinjektionsans{\"a}tze und -werkzeuge anzuwenden und hinsichtlich ihrer Anwendbarkeit in verschiedenen Szenarien zu bewerten. In diesem Bericht werden die studierten Ans{\"a}tze vorgestellt und verglichen.}, language = {de} } @book{FelgentreffBorningHirschfeld2013, author = {Felgentreff, Tim and Borning, Alan and Hirschfeld, Robert}, title = {Babelsberg : specifying and solving constraints on object behavior}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-265-0}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-67296}, publisher = {Universit{\"a}t Potsdam}, pages = {53}, year = {2013}, abstract = {Constraints allow developers to specify desired properties of systems in a number of domains, and have those properties be maintained automatically. This results in compact, declarative code, avoiding scattered code to check and imperatively re-satisfy invariants. Despite these advantages, constraint programming is not yet widespread, with standard imperative programming still the norm. There is a long history of research on integrating constraint programming with the imperative paradigm. However, this integration typically does not unify the constructs for encapsulation and abstraction from both paradigms. This impedes re-use of modules, as client code written in one paradigm can only use modules written to support that paradigm. Modules require redundant definitions if they are to be used in both paradigms. We present a language - Babelsberg - that unifies the constructs for en- capsulation and abstraction by using only object-oriented method definitions for both declarative and imperative code. Our prototype - Babelsberg/R - is an extension to Ruby, and continues to support Ruby's object-oriented se- mantics. It allows programmers to add constraints to existing Ruby programs in incremental steps by placing them on the results of normal object-oriented message sends. It is implemented by modifying a state-of-the-art Ruby virtual machine. The performance of standard object-oriented code without con- straints is only modestly impacted, with typically less than 10\% overhead compared with the unmodified virtual machine. Furthermore, our architec- ture for adding multiple constraint solvers allows Babelsberg to deal with constraints in a variety of domains. We argue that our approach provides a useful step toward making con- straint solving a generic tool for object-oriented programmers. We also provide example applications, written in our Ruby-based implementation, which use constraints in a variety of application domains, including interactive graphics, circuit simulations, data streaming with both hard and soft constraints on performance, and configuration file Management.}, language = {en} } @book{FelgentreffHirschfeldMillsteinetal.2015, author = {Felgentreff, Tim and Hirschfeld, Robert and Millstein, Todd and Borning, Alan}, title = {Babelsberg/RML}, number = {103}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-348-0}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-83826}, publisher = {Universit{\"a}t Potsdam}, pages = {68}, year = {2015}, abstract = {New programming language designs are often evaluated on concrete implementations. However, in order to draw conclusions about the language design from the evaluation of concrete programming languages, these implementations need to be verified against the formalism of the design. To that end, we also have to ensure that the design actually meets its stated goals. A useful tool for the latter has been to create an executable semantics from a formalism that can execute a test suite of examples. However, this mechanism so far did not allow to verify an implementation against the design. Babelsberg is a new design for a family of object-constraint languages. Recently, we have developed a formal semantics to clarify some issues in the design of those languages. Supplementing this work, we report here on how this formalism is turned into an executable operational semantics using the RML system. Furthermore, we show how we extended the executable semantics to create a framework that can generate test suites for the concrete Babelsberg implementations that provide traceability from the design to the language. Finally, we discuss how these test suites helped us find and correct mistakes in the Babelsberg implementation for JavaScript.}, language = {en} } @book{FlottererMaximovaSchneideretal.2022, author = {Flotterer, Boris and Maximova, Maria and Schneider, Sven and Dyck, Johannes and Z{\"o}llner, Christian and Giese, Holger and H{\´e}ly, Christelle and Gaucherel, C{\´e}dric}, title = {Modeling and Formal Analysis of Meta-Ecosystems with Dynamic Structure using Graph Transformation}, series = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Digital Engineering an der Universit{\"a}t Potsdam}, journal = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Digital Engineering an der Universit{\"a}t Potsdam}, number = {147}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-533-0}, issn = {1613-5652}, doi = {10.25932/publishup-54764}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-547643}, publisher = {Universit{\"a}t Potsdam}, pages = {47}, year = {2022}, abstract = {The dynamics of ecosystems is of crucial importance. Various model-based approaches exist to understand and analyze their internal effects. In this paper, we model the space structure dynamics and ecological dynamics of meta-ecosystems using the formal technique of Graph Transformation (short GT). We build GT models to describe how a meta-ecosystem (modeled as a graph) can evolve over time (modeled by GT rules) and to analyze these GT models with respect to qualitative properties such as the existence of structural stabilities. As a case study, we build three GT models describing the space structure dynamics and ecological dynamics of three different savanna meta-ecosystems. The first GT model considers a savanna meta-ecosystem that is limited in space to two ecosystem patches, whereas the other two GT models consider two savanna meta-ecosystems that are unlimited in the number of ecosystem patches and only differ in one GT rule describing how the space structure of the meta-ecosystem grows. In the first two GT models, the space structure dynamics and ecological dynamics of the meta-ecosystem shows two main structural stabilities: the first one based on grassland-savanna-woodland transitions and the second one based on grassland-desert transitions. The transition between these two structural stabilities is driven by high-intensity fires affecting the tree components. In the third GT model, the GT rule for savanna regeneration induces desertification and therefore a collapse of the meta-ecosystem. We believe that GT models provide a complementary avenue to that of existing approaches to rigorously study ecological phenomena.}, language = {en} } @book{Freischlad2009, author = {Freischlad, Stefan}, title = {Entwicklung und Erprobung des Didaktischen Systems Internetworking im Informatikunterricht}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-058-8}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41851}, publisher = {Universit{\"a}t Potsdam}, pages = {XIV, 405}, year = {2009}, abstract = {Internetbasierte Informatiksysteme beeinflussen in steigendem Maße Situationen in unterschiedlichen Lebensbereichen. Kompetenzen zur Verwendung von Internetanwendungen und -diensten m{\"u}ssen explizit erworben werden, weil damit ein notwendiger Einblick in nicht beobachtbare Abl{\"a}ufe und nicht offen sichtbare Strukturen verbunden ist. Bisher gibt es Vorschl{\"a}ge f{\"u}r die Gestaltung schulischer Lehr-Lernprozesse zu ausgew{\"a}hlten Teilaspekten des Internets. Es fehlt eine systematische Analyse des Bildungsbedarfs und ein daraus resultierendes Unterrichtsmodell. In dieser Arbeit wird ein Gesamtkonzept f{\"u}r den Informatikunterricht in der Sekundarstufe II vorgestellt, das zu zielgerichteter und verantwortungsvoller Anwendung des Internets beitr{\"a}gt. Die vorliegende Arbeit umfasst den Prozess von der Analyse erforderlicher Kompetenzen bis zur Realisierung von Lehr-Lernprozessen im Informatikunterricht in der Sekundarstufe II. Es werden der Beitrag der Informatik zu identifizierten Kompetenzen untersucht und Bildungsanforderungen bestimmt. Bildungsempfehlungen und Forschungsergebnisse zu erfolgreichen Unterrichtseinheiten werden im Hinblick auf die Bildungsziele analysiert. Der Informatikunterricht unterst{\"u}tzt die Kompetenzentwicklung zu internetbasierten digitalen Medien. Es wird die Entwicklung eines Unterrichtsmodells zu Internetworking beschrieben. Dazu wird der Ansatz der Didaktischen Systeme untersucht, weiter entwickelt und auf den Bereich Internetworking {\"u}bertragen. Der theoretische Ansatz wird dazu in vier Unterrichtsprojekten zu Internetworking in der Praxis realisiert. Beziehungen zwischen Fachkonzepten zu Internetworking werden untersucht und durch Wissensstrukturen zur Planung von Unterrichtsprojekten eingesetzt und in der Praxis erprobt. Die Beschreibung von Lernaktivit{\"a}ten erfolgt auf der Basis von Aufgabenklassen, die das notwendige Wissen zur Bearbeitung einer Aufgabenstellung repr{\"a}sentieren. Auf der Grundlage des Ablaufs der Aufgabenbearbeitung werden Eigenschaften von Aufgaben beschrieben und zu deren Gestaltung nutzbar gemacht. Bisher nicht durchf{\"u}hrbare T{\"a}tigkeiten im Unterricht werden durch die Entwicklung der Lernsoftware Filius erm{\"o}glicht. Die Reduktion der komplexen Wirklichkeit durch Simulation realer internetbasierter Informatiksysteme und die Auswahl geeigneter Sichten auf den Untersuchungsgegenstand werden mit Ergebnissen der Informatikdidaktik begr{\"u}ndet. Unterrichtsprojekte zu den Zielen werden durchgef{\"u}hrt, um Lehr-Lernprozesse zu erkunden und das entwickelte Didaktische System zu erproben. Ausgehend von der theoretischen Fundierung erfolgt die praktische Realisierung von Lehr-Lernprozessen. Zur Erprobung im Informatikunterricht der Sekundarstufe II in Nordrhein-Westfalen werden Minimalziele aufgrund der Lehrvorgaben bestimmt. Die methodische Gestaltung in der Erprobung erfolgt unter Ber{\"u}cksichtigung der Vorgaben f{\"u}r den Informatikunterricht und allgemeinen Anforderungen der Fachdidaktik. Handlungsorientierte Unterrichtsmittel werden ausgew{\"a}hlt und in der Praxis zur Untersuchung der Lehr-Lernprozesse verwendet. Im Unterricht identifizierte Lernschwierigkeiten f{\"u}hren zur Modifikation der Wissensstrukturen und werden im Entwicklungsprozess von Filius ber{\"u}cksichtigt. Die Erkenntnisse aus Unterrichtsprojekten werden genutzt, um zu bestimmen, zu welchen Aufgabenklassen weitere Aufgaben erforderlich sind und inwieweit das aus den identifizierten Merkmalen abgeleitete Vorgehen zur Entwicklung niveaubestimmender Aufgaben genutzt werden kann. Die Erprobungen best{\"a}tigen die Tragf{\"a}higkeit des Didaktischen Systems Internetworking und leisten mit der Implementierung in der Praxis einen Beitrag zur Untersuchung von Kompetenzentwicklung im Informatikunterricht. Mit dem Didaktischen System Internetworking wird ein theoretisch fundiertes und empirisch erprobtes Unterrichtsmodell zur Entwicklung von Kompetenzen zur Einrichtung und Anwendung internetbasierter Informatiksysteme beschrieben.}, language = {de} } @book{FreundRaetschHradilaketal.2022, author = {Freund, Rieke and R{\"a}tsch, Jan Philip and Hradilak, Franziska and Vidic, Benedikt and Heß, Oliver and Lißner, Nils and W{\"o}lert, Hendrik and Lincke, Jens and Beckmann, Tom and Hirschfeld, Robert}, title = {Implementing a crowd-sourced picture archive for Bad Harzburg}, number = {149}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-545-3}, issn = {1613-5652}, doi = {10.25932/publishup-56029}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560291}, publisher = {Universit{\"a}t Potsdam}, pages = {x, 191}, year = {2022}, abstract = {Pictures are a medium that helps make the past tangible and preserve memories. Without context, they are not able to do so. Pictures are brought to life by their associated stories. However, the older pictures become, the fewer contemporary witnesses can tell these stories. Especially for large, analog picture archives, knowledge and memories are spread over many people. This creates several challenges: First, the pictures must be digitized to save them from decaying and make them available to the public. Since a simple listing of all the pictures is confusing, the pictures should be structured accessibly. Second, known information that makes the stories vivid needs to be added to the pictures. Users should get the opportunity to contribute their knowledge and memories. To make this usable for all interested parties, even for older, less technophile generations, the interface should be intuitive and error-tolerant. The resulting requirements are not covered in their entirety by any existing software solution without losing the intuitive interface or the scalability of the system. Therefore, we have developed our digital picture archive within the scope of a bachelor project in cooperation with the Bad Harzburg-Stiftung. For the implementation of this web application, we use the UI framework React in the frontend, which communicates via a GraphQL interface with the Content Management System Strapi in the backend. The use of this system enables our project partner to create an efficient process from scanning analog pictures to presenting them to visitors in an organized and annotated way. To customize the solution for both picture delivery and information contribution for our target group, we designed prototypes and evaluated them with people from Bad Harzburg. This helped us gain valuable insights into our system's usability and future challenges as well as requirements. Our web application is already being used daily by our project partner. During the project, we still came up with numerous ideas for additional features to further support the exchange of knowledge.}, language = {en} } @book{GarusSawahnWankeetal.2023, author = {Garus, Marcel and Sawahn, Rohan and Wanke, Jonas and Tiedt, Clemens and Granzow, Clara and Kuffner, Tim and Rosenbaum, Jannis and Hagemann, Linus and Wollnik, Tom and Woth, Lorenz and Auringer, Felix and Kantusch, Tobias and Roth, Felix and Hanff, Konrad and Schilli, Niklas and Seibold, Leonard and Lindner, Marc Fabian and Raschack, Selina}, title = {Operating systems II - student projects}, number = {142}, editor = {Grapentin, Andreas and Tiedt, Clemens and Polze, Andreas}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-524-8}, issn = {1613-5652}, doi = {10.25932/publishup-52636}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-526363}, publisher = {Universit{\"a}t Potsdam}, pages = {ix, 114}, year = {2023}, abstract = {This technical report presents the results of student projects which were prepared during the lecture "Operating Systems II" offered by the "Operating Systems and Middleware" group at HPI in the Summer term of 2020. The lecture covered ad- vanced aspects of operating system implementation and architecture on topics such as Virtualization, File Systems and Input/Output Systems. In addition to attending the lecture, the participating students were encouraged to gather practical experience by completing a project on a closely related topic over the course of the semester. The results of 10 selected exceptional projects are covered in this report. The students have completed hands-on projects on the topics of Operating System Design Concepts and Implementation, Hardware/Software Co-Design, Reverse Engineering, Quantum Computing, Static Source-Code Analysis, Operating Systems History, Application Binary Formats and more. It should be recognized that over the course of the semester all of these projects have achieved outstanding results which went far beyond the scope and the expec- tations of the lecture, and we would like to thank all participating students for their commitment and their effort in completing their respective projects, as well as their work on compiling this report.}, language = {en} } @book{GayvoronskayaMeinelSchnjakin2018, author = {Gayvoronskaya, Tatiana and Meinel, Christoph and Schnjakin, Maxim}, title = {Blockchain}, number = {113}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-394-7}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103141}, publisher = {Universit{\"a}t Potsdam}, pages = {109}, year = {2018}, abstract = {Der Begriff Blockchain ist in letzter Zeit zu einem Schlagwort geworden, aber nur wenige wissen, was sich genau dahinter verbirgt. Laut einer Umfrage, die im ersten Quartal 2017 ver{\"o}ffentlicht wurde, ist der Begriff nur bei 35 Prozent der deutschen Mittelst{\"a}ndler bekannt. Dabei ist die Blockchain-Technologie durch ihre rasante Entwicklung und die globale Eroberung unterschiedlicher M{\"a}rkte f{\"u}r Massenmedien sehr interessant. So sehen viele die Blockchain-Technologie entweder als eine Allzweckwaffe, zu der aber nur wenige einen Zugang haben, oder als eine Hacker-Technologie f{\"u}r geheime Gesch{\"a}fte im Darknet. Dabei liegt die Innovation der Blockchain-Technologie in ihrer erfolgreichen Zusammensetzung bereits vorhandener Ans{\"a}tze: dezentrale Netzwerke, Kryptographie, Konsensfindungsmodelle. Durch das innovative Konzept wird ein Werte-Austausch in einem dezentralen System m{\"o}glich. Dabei wird kein Vertrauen zwischen dessen Knoten (z.B. Nutzer) vorausgesetzt. Mit dieser Studie m{\"o}chte das Hasso-Plattner-Institut den Lesern helfen, ihren eigenen Standpunkt zur Blockchain-Technologie zu finden und dabei dazwischen unterscheiden zu k{\"o}nnen, welche Eigenschaften wirklich innovativ und welche nichts weiter als ein Hype sind. Die Autoren der vorliegenden Arbeit analysieren positive und negative Eigenschaften, welche die Blockchain-Architektur pr{\"a}gen, und stellen m{\"o}gliche Anpassungs- und L{\"o}sungsvorschl{\"a}ge vor, die zu einem effizienten Einsatz der Technologie beitragen k{\"o}nnen. Jedem Unternehmen, bevor es sich f{\"u}r diese Technologie entscheidet, wird dabei empfohlen, f{\"u}r den geplanten Anwendungszweck zun{\"a}chst ein klares Ziel zu definieren, das mit einem angemessenen Kosten-Nutzen-Verh{\"a}ltnis angestrebt werden kann. Dabei sind sowohl die M{\"o}glichkeiten als auch die Grenzen der Blockchain-Technologie zu beachten. Die relevanten Schritte, die es in diesem Zusammenhang zu beachten gilt, fasst die Studie f{\"u}r die Leser {\"u}bersichtlich zusammen. Es wird ebenso auf akute Fragestellungen wie Skalierbarkeit der Blockchain, geeigneter Konsensalgorithmus und Sicherheit eingegangen, darunter verschiedene Arten m{\"o}glicher Angriffe und die entsprechenden Gegenmaßnahmen zu deren Abwehr. Neue Blockchains etwa laufen Gefahr, geringere Sicherheit zu bieten, da {\"A}nderungen an der bereits bestehenden Technologie zu Schutzl{\"u}cken und M{\"a}ngeln f{\"u}hren k{\"o}nnen. Nach Diskussion der innovativen Eigenschaften und Probleme der Blockchain-Technologie wird auf ihre Umsetzung eingegangen. Interessierten Unternehmen stehen viele Umsetzungsm{\"o}glichkeiten zur Verf{\"u}gung. Die zahlreichen Anwendungen haben entweder eine eigene Blockchain als Grundlage oder nutzen bereits bestehende und weitverbreitete Blockchain-Systeme. Zahlreiche Konsortien und Projekte bieten „Blockchain-as-a-Service" an und unterst{\"u}tzen andere Unternehmen beim Entwickeln, Testen und Bereitstellen von Anwendungen. Die Studie gibt einen detaillierten {\"U}berblick {\"u}ber zahlreiche relevante Einsatzbereiche und Projekte im Bereich der Blockchain-Technologie. Dadurch, dass sie noch relativ jung ist und sich schnell entwickelt, fehlen ihr noch einheitliche Standards, die Zusammenarbeit der verschiedenen Systeme erlauben und an die sich alle Entwickler halten k{\"o}nnen. Aktuell orientieren sich Entwickler an Bitcoin-, Ethereum- und Hyperledger-Systeme, diese dienen als Grundlage f{\"u}r viele weitere Blockchain-Anwendungen. Ziel ist, den Lesern einen klaren und umfassenden {\"U}berblick {\"u}ber die Blockchain-Technologie und deren M{\"o}glichkeiten zu vermitteln.}, language = {de} } @book{GellerHirschfeldBracha2010, author = {Geller, Felix and Hirschfeld, Robert and Bracha, Gilad}, title = {Pattern Matching for an object-oriented and dynamically typed programming language}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-065-6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-43035}, publisher = {Universit{\"a}t Potsdam}, pages = {81}, year = {2010}, abstract = {Pattern matching is a well-established concept in the functional programming community. It provides the means for concisely identifying and destructuring values of interest. This enables a clean separation of data structures and respective functionality, as well as dispatching functionality based on more than a single value. Unfortunately, expressive pattern matching facilities are seldomly incorporated in present object-oriented programming languages. We present a seamless integration of pattern matching facilities in an object-oriented and dynamically typed programming language: Newspeak. We describe language extensions to improve the practicability and integrate our additions with the existing programming environment for Newspeak. This report is based on the first author's master's thesis.}, language = {en} } @book{GerkenUebernickeldePaula2022, author = {Gerken, Stefanie and Uebernickel, Falk and de Paula, Danielly}, title = {Design Thinking: a Global Study on Implementation Practices in Organizations}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-525-5}, doi = {10.25932/publishup-53466}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-534668}, publisher = {Universit{\"a}t Potsdam}, pages = {230}, year = {2022}, abstract = {These days design thinking is no longer a "new approach". Among practitioners, as well as academics, interest in the topic has gathered pace over the last two decades. However, opinions are divided over the longevity of the phenomenon: whether design thinking is merely "old wine in new bottles," a passing trend, or still evolving as it is being spread to an increasing number of organizations and industries. Despite its growing relevance and the diffusion of design thinking, knowledge on the actual status quo in organizations remains scarce. With a new study, the research team of Prof. Uebernickel and Stefanie Gerken investigates temporal developments and changes in design thinking practices in organizations over the past six years comparing the results of the 2015 "Parts without a whole" study with current practices and future developments. Companies of all sizes and from different parts of the world participated in the survey. The findings from qualitative interviews with experts, i.e., people who have years of knowledge with design thinking, were cross-checked with the results from an exploratory analysis of the survey data. This analysis uncovers significant variances and similarities in how design thinking is interpreted and applied in businesses.}, language = {en} } @book{GieseBecker2013, author = {Giese, Holger and Becker, Basil}, title = {Modeling and verifying dynamic evolving service-oriented architectures}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-246-9}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-65112}, publisher = {Universit{\"a}t Potsdam}, pages = {97}, year = {2013}, abstract = {The service-oriented architecture supports the dynamic assembly and runtime reconfiguration of complex open IT landscapes by means of runtime binding of service contracts, launching of new components and termination of outdated ones. Furthermore, the evolution of these IT landscapes is not restricted to exchanging components with other ones using the same service contracts, as new services contracts can be added as well. However, current approaches for modeling and verification of service-oriented architectures do not support these important capabilities to their full extend.In this report we present an extension of the current OMG proposal for service modeling with UML - SoaML - which overcomes these limitations. It permits modeling services and their service contracts at different levels of abstraction, provides a formal semantics for all modeling concepts, and enables verifying critical properties. Our compositional and incremental verification approach allows for complex properties including communication parameters and time and covers besides the dynamic binding of service contracts and the replacement of components also the evolution of the systems by means of new service contracts. The modeling as well as verification capabilities of the presented approach are demonstrated by means of a supply chain example and the verification results of a first prototype are shown.}, language = {en} } @book{GieseHildebrandt2009, author = {Giese, Holger and Hildebrandt, Stephan}, title = {Efficient model synchronization of large-scale models}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-940793-84-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29281}, publisher = {Universit{\"a}t Potsdam}, pages = {27}, year = {2009}, abstract = {Model-driven software development requires techniques to consistently propagate modifications between different related models to realize its full potential. For large-scale models, efficiency is essential in this respect. In this paper, we present an improved model synchronization algorithm based on triple graph grammars that is highly efficient and, therefore, can also synchronize large-scale models sufficiently fast. We can show, that the overall algorithm has optimal complexity if it is dominating the rule matching and further present extensive measurements that show the efficiency of the presented model transformation and synchronization technique.}, language = {en} } @book{GieseHildebrandtLambers2010, author = {Giese, Holger and Hildebrandt, Stephan and Lambers, Leen}, title = {Toward bridging the gap between formal semantics and implementation of triple graph grammars}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-078-6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-45219}, publisher = {Universit{\"a}t Potsdam}, pages = {26}, year = {2010}, abstract = {The correctness of model transformations is a crucial element for the model-driven engineering of high quality software. A prerequisite to verify model transformations at the level of the model transformation specification is that an unambiguous formal semantics exists and that the employed implementation of the model transformation language adheres to this semantics. However, for existing relational model transformation approaches it is usually not really clear under which constraints particular implementations are really conform to the formal semantics. In this paper, we will bridge this gap for the formal semantics of triple graph grammars (TGG) and an existing efficient implementation. Whereas the formal semantics assumes backtracking and ignores non-determinism, practical implementations do not support backtracking, require rule sets that ensure determinism, and include further optimizations. Therefore, we capture how the considered TGG implementation realizes the transformation by means of operational rules, define required criteria and show conformance to the formal semantics if these criteria are fulfilled. We further outline how static analysis can be employed to guarantee these criteria.}, language = {en} } @book{GieseHildebrandtNeumannetal.2012, author = {Giese, Holger and Hildebrandt, Stephan and Neumann, Stefan and W{\"a}tzoldt, Sebastian}, title = {Industrial case study on the integration of SysML and AUTOSAR with triple graph grammars}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-191-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60184}, publisher = {Universit{\"a}t Potsdam}, pages = {vi, 51}, year = {2012}, abstract = {During the overall development of complex engineering systems different modeling notations are employed. For example, in the domain of automotive systems system engineering models are employed quite early to capture the requirements and basic structuring of the entire system, while software engineering models are used later on to describe the concrete software architecture. Each model helps in addressing the specific design issue with appropriate notations and at a suitable level of abstraction. However, when we step forward from system design to the software design, the engineers have to ensure that all decisions captured in the system design model are correctly transferred to the software engineering model. Even worse, when changes occur later on in either model, today the consistency has to be reestablished in a cumbersome manual step. In this report, we present in an extended version of [Holger Giese, Stefan Neumann, and Stephan Hildebrandt. Model Synchronization at Work: Keeping SysML and AUTOSAR Models Consistent. In Gregor Engels, Claus Lewerentz, Wilhelm Sch{\"a}fer, Andy Sch{\"u}rr, and B. Westfechtel, editors, Graph Transformations and Model Driven Enginering - Essays Dedicated to Manfred Nagl on the Occasion of his 65th Birthday, volume 5765 of Lecture Notes in Computer Science, pages 555-579. Springer Berlin / Heidelberg, 2010.] how model synchronization and consistency rules can be applied to automate this task and ensure that the different models are kept consistent. We also introduce a general approach for model synchronization. Besides synchronization, the approach consists of tool adapters as well as consistency rules covering the overlap between the synchronized parts of a model and the rest. We present the model synchronization algorithm based on triple graph grammars in detail and further exemplify the general approach by means of a model synchronization solution between system engineering models in SysML and software engineering models in AUTOSAR which has been developed for an industrial partner. In the appendix as extension to [19] the meta-models and all TGG rules for the SysML to AUTOSAR model synchronization are documented.}, language = {en} } @book{GieseMaximovaSakizloglouetal.2018, author = {Giese, Holger and Maximova, Maria and Sakizloglou, Lucas and Schneider, Sven}, title = {Metric temporal graph logic over typed attributed graphs}, number = {123}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-433-3}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-411351}, publisher = {Universit{\"a}t Potsdam}, pages = {29}, year = {2018}, abstract = {Various kinds of typed attributed graphs are used to represent states of systems from a broad range of domains. For dynamic systems, established formalisms such as graph transformations provide a formal model for defining state sequences. We consider the extended case where time elapses between states and introduce a logic to reason about these sequences. With this logic we express properties on the structure and attributes of states as well as on the temporal occurrence of states that are related by their inner structure, which no formal logic over graphs accomplishes concisely so far. Firstly, we introduce graphs with history by equipping every graph element with the timestamp of its creation and, if applicable, its deletion. Secondly, we define a logic on graphs by integrating the temporal operator until into the well-established logic of nested graph conditions. Thirdly, we prove that our logic is equally expressive to nested graph conditions by providing a suitable reduction. Finally, the implementation of this reduction allows for the tool-based analysis of metric temporal properties for state sequences.}, language = {en} } @book{GieseMaximovaSakizloglouetal.2019, author = {Giese, Holger and Maximova, Maria and Sakizloglou, Lucas and Schneider, Sven}, title = {Metric temporal graph logic over typed attributed graphs}, number = {127}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-463-0}, issn = {1613-5652}, doi = {10.25932/publishup-42752}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427522}, publisher = {Universit{\"a}t Potsdam}, pages = {34}, year = {2019}, abstract = {Graph repair, restoring consistency of a graph, plays a prominent role in several areas of computer science and beyond: For example, in model-driven engineering, the abstract syntax of models is usually encoded using graphs. Flexible edit operations temporarily create inconsistent graphs not representing a valid model, thus requiring graph repair. Similarly, in graph databases—managing the storage and manipulation of graph data—updates may cause that a given database does not satisfy some integrity constraints, requiring also graph repair. We present a logic-based incremental approach to graph repair, generating a sound and complete (upon termination) overview of least-changing repairs. In our context, we formalize consistency by so-called graph conditions being equivalent to first-order logic on graphs. We present two kind of repair algorithms: State-based repair restores consistency independent of the graph update history, whereas deltabased (or incremental) repair takes this history explicitly into account. Technically, our algorithms rely on an existing model generation algorithm for graph conditions implemented in AutoGraph. Moreover, the delta-based approach uses the new concept of satisfaction (ST) trees for encoding if and how a graph satisfies a graph condition. We then demonstrate how to manipulate these STs incrementally with respect to a graph update.}, language = {en} } @book{GroeneKnoepfelKugeletal.2004, author = {Gr{\"o}ne, Bernhard and Kn{\"o}pfel, Andreas and Kugel, Rudolf and Schmidt, Oliver}, title = {The Apache Modeling Project}, isbn = {978-3-937786-14-8}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33147}, publisher = {Universit{\"a}t Potsdam}, year = {2004}, abstract = {This document presents an introduction to the Apache HTTP Server, covering both an overview and implementation details. It presents results of the Apache Modelling Project done by research assistants and students of the Hasso-Plattner-Institute in 2001, 2002 and 2003. The Apache HTTP Server was used to introduce students to the application of the modeling technique FMC, a method that supports transporting knowledge about complex systems in the domain of information processing (software and hardware as well). After an introduction to HTTP servers in general, we will focus on protocols and web technology. Then we will discuss Apache, its operational environment and its extension capabilities— the module API. Finally we will guide the reader through parts of the Apache source code and explain the most important pieces.}, language = {en} } @book{HagedornSchoebelUflackeretal.2007, author = {Hagedorn, Benjamin and Sch{\"o}bel, Michael and Uflacker, Matthias and Copaciu, Flavius and Milanovic, Nikola}, title = {Proceedings of the fall 2006 workshop of the HPI research school on service-oriented systems engineering}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-939469-58-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33052}, publisher = {Universit{\"a}t Potsdam}, pages = {Getr. Z{\"a}hlung}, year = {2007}, abstract = {1. Design and Composition of 3D Geoinformation Services Benjamin Hagedorn 2. Operating System Abstractions for Service-Based Systems Michael Sch{\"o}bel 3. A Task-oriented Approach to User-centered Design of Service-Based Enterprise Applications Matthias Uflacker 4. A Framework for Adaptive Transport in Service- Oriented Systems based on Performance Prediction Flavius Copaciu 5. Asynchronicity and Loose Coupling in Service-Oriented Architectures Nikola Milanovic}, language = {en} } @book{HauptMarrHirschfeld2011, author = {Haupt, Michael and Marr, Stefan and Hirschfeld, Robert}, title = {CSOM/PL : a virtual machine product line}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-134-9}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52332}, publisher = {Universit{\"a}t Potsdam}, pages = {26}, year = {2011}, abstract = {CSOM/PL is a software product line (SPL) derived from applying multi-dimensional separation of concerns (MDSOC) techniques to the domain of high-level language virtual machine (VM) implementations. For CSOM/PL, we modularised CSOM, a Smalltalk VM implemented in C, using VMADL (virtual machine architecture description language). Several features of the original CSOM were encapsulated in VMADL modules and composed in various combinations. In an evaluation of our approach, we show that applying MDSOC and SPL principles to a domain as complex as that of VMs is not only feasible but beneficial, as it improves understandability, maintainability, and configurability of VM implementations without harming performance.}, language = {en} } @book{HebigGiese2012, author = {Hebig, Regina and Giese, Holger}, title = {MDE settings in SAP : a descriptive field study}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-192-9}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60193}, publisher = {Universit{\"a}t Potsdam}, pages = {64}, year = {2012}, abstract = {MDE techniques are more and more used in praxis. However, there is currently a lack of detailed reports about how different MDE techniques are integrated into the development and combined with each other. To learn more about such MDE settings, we performed a descriptive and exploratory field study with SAP, which is a worldwide operating company with around 50.000 employees and builds enterprise software applications. This technical report describes insights we got during this study. For example, we identified that MDE settings are subject to evolution. Finally, this report outlines directions for future research to provide practical advises for the application of MDE settings.}, language = {en} } @book{HebigGieseBatoulisetal.2015, author = {Hebig, Regina and Giese, Holger and Batoulis, Kimon and Langer, Philipp and Zamani Farahani, Armin and Yao, Gary and Wolowyk, Mychajlo}, title = {Development of AUTOSAR standard documents at Carmeq GmbH}, number = {92}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-317-6}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-71535}, publisher = {Universit{\"a}t Potsdam}, pages = {52}, year = {2015}, abstract = {This report documents the captured MDE history of Carmeq GmbH, in context of the project Evolution of MDE Settings in Practice. The goal of the project is the elicitation of MDE approaches and their evolution.}, language = {en} } @book{HerbstMaschlerNiephausetal.2015, author = {Herbst, Eva-Maria and Maschler, Fabian and Niephaus, Fabio and Reimann, Max and Steier, Julia and Felgentreff, Tim and Lincke, Jens and Taeumel, Marcel and Hirschfeld, Robert and Witt, Carsten}, title = {ecoControl}, number = {93}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-318-3}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-72147}, publisher = {Universit{\"a}t Potsdam}, pages = {viii, 142}, year = {2015}, abstract = {Eine dezentrale Energieversorgung ist ein erster Schritt in Richtung Energiewende. Dabei werden auch in Mehrfamilienh{\"a}usern vermehrt verschiedene Strom- und W{\"a}rmeerzeuger eingesetzt. Besonders in Deutschland kommen in diesem Zusammenhang Blockheizkraftwerke immer h{\"a}ufiger zum Einsatz, weil sie Gas sehr effizient in Strom und W{\"a}rme umwandeln k{\"o}nnen. Außerdem erm{\"o}glichen sie, im Zusammenspiel mit anderen Energiesystemen wie beispielsweise Photovoltaik-Anlagen, eine kontinuierliche und dezentrale Energieversorgung. Bei dem Betrieb von unterschiedlichen Energiesystemen ist es w{\"u}nschenswert, dass die Systeme aufeinander abgestimmt arbeiten. Allerdings ist es bisher schwierig, heterogene Energiesysteme effizient miteinander zu betreiben. Dadurch bleiben Einsparungspotentiale ungenutzt. Eine zentrale Steuerung kann deshalb die Effizienz des Gesamtsystems verbessern. Mit ecoControl stellen wir einen erweiterbaren Prototypen vor, der die Kooperation von Energiesystemen optimiert und Umweltfaktoren miteinbezieht. Dazu stellt die Software eine einheitliche Bedienungsoberfl{\"a}che zur Konfiguration aller Systeme zur Verf{\"u}gung. Außerdem bietet sie die M{\"o}glichkeit, Optimierungsalgorithmen mit Hilfe einer Programmierschnittstelle zu entwickeln, zu testen und auszuf{\"u}hren. Innerhalb solcher Algorithmen k{\"o}nnen von ecoControl bereitgestellte Vorhersagen genutzt werden. Diese Vorhersagen basieren auf dem individuellen Verhalten von jedem Energiesystem, Wettervorhersagen und auf Prognosen des Energieverbrauchs. Mithilfe einer Simulation k{\"o}nnen Techniker unterschiedliche Konfigurationen und Optimierungen sofort ausprobieren, ohne diese {\"u}ber einen langen Zeitraum an realen Ger{\"a}ten testen zu m{\"u}ssen. ecoControl hilft dar{\"u}ber hinaus auch Hausverwaltungen und Vermietern bei der Verwaltung und Analyse der Energiekosten. Wir haben anhand von Fallbeispielen gezeigt, dass Optimierungsalgorithmen, welche die Nutzung von W{\"a}rmespeichern verbessern, die Effizienz des Gesamtsystems erheblich verbessern k{\"o}nnen. Schließlich kommen wir zu dem Schluss, dass ecoControl in einem n{\"a}chsten Schritt unter echten Bedingungen getestet werden muss, sobald eine geeignete Hardwarekomponente verf{\"u}gbar ist. {\"U}ber diese Schnittstelle werden die Messwerte an ecoControl gesendet und Steuersignale an die Ger{\"a}te weitergeleitet.}, language = {de} } @book{HerschelNaumann2008, author = {Herschel, Melanie and Naumann, Felix}, title = {Space and time scalability of duplicate detection in graph data}, isbn = {978-3-940793-46-1}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-32851}, publisher = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {Duplicate detection consists in determining different representations of real-world objects in a database. Recent research has considered the use of relationships among object representations to improve duplicate detection. In the general case where relationships form a graph, research has mainly focused on duplicate detection quality/effectiveness. Scalability has been neglected so far, even though it is crucial for large real-world duplicate detection tasks. In this paper we scale up duplicate detection in graph data (DDG) to large amounts of data and pairwise comparisons, using the support of a relational database system. To this end, we first generalize the process of DDG. We then present how to scale algorithms for DDG in space (amount of data processed with limited main memory) and in time. Finally, we explore how complex similarity computation can be performed efficiently. Experiments on data an order of magnitude larger than data considered so far in DDG clearly show that our methods scale to large amounts of data not residing in main memory.}, language = {en} } @book{HerzbergWeske2013, author = {Herzberg, Nico and Weske, Mathias}, title = {Enriching raw events to enable process intelligence : research challenges}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-241-4}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64012}, publisher = {Universit{\"a}t Potsdam}, pages = {30}, year = {2013}, abstract = {Business processes are performed within a company's daily business. Thereby, valuable data about the process execution is produced. The quantity and quality of this data is very dependent on the process execution environment that reaches from predominantly manual to fullautomated. Process improvement is one essential cornerstone of business process management to ensure companies' competitiveness and relies on information about the process execution. Especially in manual process environments data directly related to the process execution is rather sparse and incomplete. In this paper, we present an approach that supports the usage and enrichment of process execution data with context data - data that exists orthogonally to business process data - and knowledge from the corresponding process models to provide a high-quality event base for process intelligence subsuming, among others, process monitoring, process analysis, and process mining. Further, we discuss open issues and challenges that are subject to our future work.}, language = {de} } @book{HuCordelMeinel2006, author = {Hu, Ji and Cordel, Dirk and Meinel, Christoph}, title = {A virtual machine architecture for creating IT-security laboratories}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-939469-13-1}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33077}, publisher = {Universit{\"a}t Potsdam}, pages = {50}, year = {2006}, abstract = {E-learning is a flexible and personalized alternative to traditional education. Nonetheless, existing e-learning systems for IT security education have difficulties in delivering hands-on experience because of the lack of proximity. Laboratory environments and practical exercises are indispensable instruction tools to IT security education, but security education in con-ventional computer laboratories poses the problem of immobility as well as high creation and maintenance costs. Hence, there is a need to effectively transform security laboratories and practical exercises into e-learning forms. This report introduces the Tele-Lab IT-Security architecture that allows students not only to learn IT security principles, but also to gain hands-on security experience by exercises in an online laboratory environment. In this architecture, virtual machines are used to provide safe user work environments instead of real computers. Thus, traditional laboratory environments can be cloned onto the Internet by software, which increases accessibilities to laboratory resources and greatly reduces investment and maintenance costs. Under the Tele-Lab IT-Security framework, a set of technical solutions is also proposed to provide effective functionalities, reliability, security, and performance. The virtual machines with appropriate resource allocation, software installation, and system configurations are used to build lightweight security laboratories on a hosting computer. Reliability and availability of laboratory platforms are covered by the virtual machine management framework. This management framework provides necessary monitoring and administration services to detect and recover critical failures of virtual machines at run time. Considering the risk that virtual machines can be misused for compromising production networks, we present security management solutions to prevent misuse of laboratory resources by security isolation at the system and network levels. This work is an attempt to bridge the gap between e-learning/tele-teaching and practical IT security education. It is not to substitute conventional teaching in laboratories but to add practical features to e-learning. This report demonstrates the possibility to implement hands-on security laboratories on the Internet reliably, securely, and economically.}, language = {en} } @book{JuizBermejoCalleetal.2024, author = {Juiz, Carlos and Bermejo, Belen and Calle, Alejandro and Sidorova, Julia and Lundberg, Lars and Weidmann, Vera and Lowitzki, Leon and Mirtschin, Marvin and Hoorn, Andr{\´e} van and Frank, Markus and Schulz, Henning and Stojanovic, Dragan and Stojanovic, Natalija and Stojnev Ilic, Aleksandra and Friedrich, Tobias and Lenzner, Pascal and Weyand, Christopher and Wagner, Markus and Plauth, Max and Polze, Andreas and Nowicki, Marek and Seth, Sugandh and Kaur Chahal, Kuljit and Singh, Gurwinder and Speth, Sandro and Janes, Andrea and Camilli, Matteo and Ziegler, Erik and Schmidberger, Marcel and P{\"o}rschke, Mats and Bartz, Christian and Lorenz, Martin and Meinel, Christoph and Beilich, Robert and Bertazioli, Dario and Carlomagno, Cristiano and Bedoni, Marzia and Messina, Vincenzina}, title = {HPI Future SOC Lab}, series = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Digital Engineering an der Universit{\"a}t Potsdam}, journal = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Digital Engineering an der Universit{\"a}t Potsdam}, number = {159}, editor = {Meinel, Christoph and Polze, Andreas and Beins, Karsten and Strotmann, Rolf and Seibold, Ulrich and R{\"o}dszus, Kurt and M{\"u}ller, J{\"u}rgen and Sommer, J{\"u}rgen}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-565-1}, issn = {1613-5652}, doi = {10.25932/publishup-59801}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-598014}, publisher = {Universit{\"a}t Potsdam}, pages = {ix, 142}, year = {2024}, abstract = {The "HPI Future SOC Lab" is a cooperation of the Hasso Plattner Institute (HPI) and industry partners. Its mission is to enable and promote exchange and interaction between the research community and the industry partners. The HPI Future SOC Lab provides researchers with free of charge access to a complete infrastructure of state of the art hard and software. This infrastructure includes components, which might be too expensive for an ordinary research environment, such as servers with up to 64 cores and 2 TB main memory. The offerings address researchers particularly from but not limited to the areas of computer science and business information systems. Main areas of research include cloud computing, parallelization, and In-Memory technologies. This technical report presents results of research projects executed in 2020. Selected projects have presented their results on April 21st and November 10th 2020 at the Future SOC Lab Day events.}, language = {en} } @book{KlauckMaschlerTausche2017, author = {Klauck, Stefan and Maschler, Fabian and Tausche, Karsten}, title = {Proceedings of the Fourth HPI Cloud Symposium "Operating the Cloud" 2016}, number = {117}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-401-2}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-394513}, publisher = {Universit{\"a}t Potsdam}, pages = {32}, year = {2017}, abstract = {Every year, the Hasso Plattner Institute (HPI) invites guests from industry and academia to a collaborative scientific workshop on the topic Every year, the Hasso Plattner Institute (HPI) invites guests from industry and academia to a collaborative scientific workshop on the topic "Operating the Cloud". Our goal is to provide a forum for the exchange of knowledge and experience between industry and academia. Co-located with the event is the HPI's Future SOC Lab day, which offers an additional attractive and conducive environment for scientific and industry related discussions. "Operating the Cloud" aims to be a platform for productive interactions of innovative ideas, visions, and upcoming technologies in the field of cloud operation and administration. On the occasion of this symposium we called for submissions of research papers and practitioner's reports. A compilation of the research papers realized during the fourth HPI cloud symposium "Operating the Cloud" 2016 are published in this proceedings. We thank the authors for exciting presentations and insights into their current work and research. Moreover, we look forward to more interesting submissions for the upcoming symposium later in the year. Every year, the Hasso Plattner Institute (HPI) invites guests from industry and academia to a collaborative scientific workshop on the topic "Operating the Cloud". Our goal is to provide a forum for the exchange of knowledge and experience between industry and academia. Co-located with the event is the HPI's Future SOC Lab day, which offers an additional attractive and conducive environment for scientific and industry related discussions. "Operating the Cloud" aims to be a platform for productive interactions of innovative ideas, visions, and upcoming technologies in the field of cloud operation and administration.}, language = {en} } @book{KleineHirschfeldBracha2011, author = {Kleine, Matthias and Hirschfeld, Robert and Bracha, Gilad}, title = {An abstraction for version control systems}, series = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Softwaresystemtechnik an der Universit{\"a}t Potsdam}, journal = {Technische Berichte des Hasso-Plattner-Instituts f{\"u}r Softwaresystemtechnik an der Universit{\"a}t Potsdam}, number = {54}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-158-5}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-55629}, publisher = {Universit{\"a}t Potsdam}, pages = {77}, year = {2011}, abstract = {Versionsverwaltungssysteme (VCS) erm{\"o}glichen es Entwicklern, {\"A}nderungen an Softwareartifakten zu verwalten. VCS werden mit Hilfe einer Vielzahl verschiedener Werkzeuge bedient, wie z.\,B. graphische Front-ends oder Kommandozeilenwerkzeuge. Es ist w{\"u}nschenswert mit einzelnen solcher Werkzeuge unterschiedliche VCS bedienen zu k{\"o}nnen. Bislang hat sich jedoch keine Abstraktion f{\"u}r Versionsverwaltungssysteme durchgesetzt, mit deren Hilfe solche Werkzeuge erstellt werden k{\"o}nnen. Stattdessen implementieren Werkzeuge zur Interaktion mit mehreren VCS ad-hoc L{\"o}sungen. Diese Masterarbeit stellt Pur vor, eine Abstraktion {\"u}ber Versionsverwaltungskonzepte. Mit Hilfe von Pur k{\"o}nnen Anwendungsprogramme entwickelt werden, die mit mehreren Versionsverwaltungssystemen interagieren k{\"o}nnen. Im Rahmen dieser Arbeit wird eine Implementierung dieser Abstraktion bereitgestellt und mit Hilfe eines Anwendungsprogramms validiert.}, language = {en} } @book{KlinkeVerhoevenRothetal.2022, author = {Klinke, Paula and Verhoeven, Silvan and Roth, Felix and Hagemann, Linus and Alnawa, Tarik and Lincke, Jens and Rein, Patrick and Hirschfeld, Robert}, title = {Tool support for collaborative creation of interactive storytelling media}, number = {141}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-521-7}, issn = {1613-5652}, doi = {10.25932/publishup-51857}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-518570}, publisher = {Universit{\"a}t Potsdam}, pages = {x, 167}, year = {2022}, abstract = {Scrollytellings are an innovative form of web content. Combining the benefits of books, images, movies, and video games, they are a tool to tell compelling stories and provide excellent learning opportunities. Due to their multi-modality, creating high-quality scrollytellings is not an easy task. Different professions, such as content designers, graphics designers, and developers, need to collaborate to get the best out of the possibilities the scrollytelling format provides. Collaboration unlocks great potential. However, content designers cannot create scrollytellings directly and always need to consult with developers to implement their vision. This can result in misunderstandings. Often, the resulting scrollytelling will not match the designer's vision sufficiently, causing unnecessary iterations. Our project partner Typeshift specializes in the creation of individualized scrollytellings for their clients. Examined existing solutions for authoring interactive content are not optimally suited for creating highly customized scrollytellings while still being able to manipulate all their elements programmatically. Based on their experience and expertise, we developed an editor to author scrollytellings in the lively.next live-programming environment. In this environment, a graphical user interface for content design is combined with powerful possibilities for programming behavior with the morphic system. The editor allows content designers to take on large parts of the creation process of scrollytellings on their own, such as creating the visible elements, animating content, and fine-tuning the scrollytelling. Hence, developers can focus on interactive elements such as simulations and games. Together with Typeshift, we evaluated the tool by recreating an existing scrollytelling and identified possible future enhancements. Our editor streamlines the creation process of scrollytellings. Content designers and developers can now both work on the same scrollytelling. Due to the editor inside of the lively.next environment, they can both work with a set of tools familiar to them and their traits. Thus, we mitigate unnecessary iterations and misunderstandings by enabling content designers to realize large parts of their vision of a scrollytelling on their own. Developers can add advanced and individual behavior. Thus, developers and content designers benefit from a clearer distribution of tasks while keeping the benefits of collaboration.}, language = {en} } @book{KrauseGiese2012, author = {Krause, Christian and Giese, Holger}, title = {Quantitative modeling and analysis of service-oriented real-time systems using interval probabilistic timed automata}, publisher = {Universit{\"a}tsverlah Potsdam}, address = {Potsdam}, isbn = {978-3-86956-171-4}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57845}, publisher = {Universit{\"a}t Potsdam}, pages = {45}, year = {2012}, abstract = {One of the key challenges in service-oriented systems engineering is the prediction and assurance of non-functional properties, such as the reliability and the availability of composite interorganizational services. Such systems are often characterized by a variety of inherent uncertainties, which must be addressed in the modeling and the analysis approach. The different relevant types of uncertainties can be categorized into (1) epistemic uncertainties due to incomplete knowledge and (2) randomization as explicitly used in protocols or as a result of physical processes. In this report, we study a probabilistic timed model which allows us to quantitatively reason about nonfunctional properties for a restricted class of service-oriented real-time systems using formal methods. To properly motivate the choice for the used approach, we devise a requirements catalogue for the modeling and the analysis of probabilistic real-time systems with uncertainties and provide evidence that the uncertainties of type (1) and (2) in the targeted systems have a major impact on the used models and require distinguished analysis approaches. The formal model we use in this report are Interval Probabilistic Timed Automata (IPTA). Based on the outlined requirements, we give evidence that this model provides both enough expressiveness for a realistic and modular specifiation of the targeted class of systems, and suitable formal methods for analyzing properties, such as safety and reliability properties in a quantitative manner. As technical means for the quantitative analysis, we build on probabilistic model checking, specifically on probabilistic time-bounded reachability analysis and computation of expected reachability rewards and costs. To carry out the quantitative analysis using probabilistic model checking, we developed an extension of the Prism tool for modeling and analyzing IPTA. Our extension of Prism introduces a means for modeling probabilistic uncertainty in the form of probability intervals, as required for IPTA. For analyzing IPTA, our Prism extension moreover adds support for probabilistic reachability checking and computation of expected rewards and costs. We discuss the performance of our extended version of Prism and compare the interval-based IPTA approach to models with fixed probabilities.}, language = {en} } @book{KubanRottaNolteetal.2024, author = {Kuban, Robert and Rotta, Randolf and Nolte, J{\"o}rg and Chromik, Jonas and Beilharz, Jossekin Jakob and Pirl, Lukas and Friedrich, Tobias and Lenzner, Pascal and Weyand, Christopher and Juiz, Carlos and Bermejo, Belen and Sauer, Joao and Coelh, Leandro dos Santos and Najafi, Pejman and P{\"u}nter, Wenzel and Cheng, Feng and Meinel, Christoph and Sidorova, Julia and Lundberg, Lars and Vogel, Thomas and Tran, Chinh and Moser, Irene and Grunske, Lars and Elsaid, Mohamed Esameldin Mohamed and Abbas, Hazem M. and Rula, Anisa and Sejdiu, Gezim and Maurino, Andrea and Schmidt, Christopher and H{\"u}gle, Johannes and Uflacker, Matthias and Nozza, Debora and Messina, Enza and Hoorn, Andr{\´e} van and Frank, Markus and Schulz, Henning and Alhosseini Almodarresi Yasin, Seyed Ali and Nowicki, Marek and Muite, Benson K. and Boysan, Mehmet Can and Bianchi, Federico and Cremaschi, Marco and Moussa, Rim and Abdel-Karim, Benjamin M. and Pfeuffer, Nicolas and Hinz, Oliver and Plauth, Max and Polze, Andreas and Huo, Da and Melo, Gerard de and Mendes Soares, F{\´a}bio and Oliveira, Roberto C{\´e}lio Lim{\~a}o de and Benson, Lawrence and Paul, Fabian and Werling, Christian and Windheuser, Fabian and Stojanovic, Dragan and Djordjevic, Igor and Stojanovic, Natalija and Stojnev Ilic, Aleksandra and Weidmann, Vera and Lowitzki, Leon and Wagner, Markus and Ifa, Abdessatar Ben and Arlos, Patrik and Megia, Ana and Vendrell, Joan and Pfitzner, Bjarne and Redondo, Alberto and R{\´i}os Insua, David and Albert, Justin Amadeus and Zhou, Lin and Arnrich, Bert and Szab{\´o}, Ildik{\´o} and Fodor, Szabina and Ternai, Katalin and Bhowmik, Rajarshi and Campero Durand, Gabriel and Shevchenko, Pavlo and Malysheva, Milena and Prymak, Ivan and Saake, Gunter}, title = {HPI Future SOC Lab - Proceedings 2019}, number = {158}, editor = {Meinel, Christoph and Polze, Andreas and Beins, Karsten and Strotmann, Rolf and Seibold, Ulrich and R{\"o}dszus, Kurt and M{\"u}ller, J{\"u}rgen}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-564-4}, issn = {1613-5652}, doi = {10.25932/publishup-59791}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-597915}, publisher = {Universit{\"a}t Potsdam}, pages = {xi, 301}, year = {2024}, abstract = {The "HPI Future SOC Lab" is a cooperation of the Hasso Plattner Institute (HPI) and industry partners. Its mission is to enable and promote exchange and interaction between the research community and the industry partners. The HPI Future SOC Lab provides researchers with free of charge access to a complete infrastructure of state of the art hard and software. This infrastructure includes components, which might be too expensive for an ordinary research environment, such as servers with up to 64 cores and 2 TB main memory. The offerings address researchers particularly from but not limited to the areas of computer science and business information systems. Main areas of research include cloud computing, parallelization, and In-Memory technologies. This technical report presents results of research projects executed in 2019. Selected projects have presented their results on April 9th and November 12th 2019 at the Future SOC Lab Day events.}, language = {en} } @book{KunzeWeske2016, author = {Kunze, Matthias and Weske, Mathias}, title = {Behavioural Models}, publisher = {Springer}, address = {Cham}, isbn = {978-3-319-44958-6}, publisher = {Universit{\"a}t Potsdam}, pages = {279}, year = {2016}, abstract = {This textbook introduces the basis for modelling and analysing discrete dynamic systems, such as computer programmes, soft- and hardware systems, and business processes. The underlying concepts are introduced and concrete modelling techniques are described, such as finite automata, state machines, and Petri nets. The concepts are related to concrete application scenarios, among which business processes play a prominent role. The book consists of three parts, the first of which addresses the foundations of behavioural modelling. After a general introduction to modelling, it introduces transition systems as a basic formalism for representing the behaviour of discrete dynamic systems. This section also discusses causality, a fundamental concept for modelling and reasoning about behaviour. In turn, Part II forms the heart of the book and is devoted to models of behaviour. It details both sequential and concurrent systems and introduces finite automata, state machines and several different types of Petri nets. One chapter is especially devoted to business process models, workflow patterns and BPMN, the industry standard for modelling business processes. Lastly, Part III investigates how the behaviour of systems can be analysed. To this end, it introduces readers to the concept of state spaces. Further chapters cover the comparison of behaviour and the formal analysis and verification of behavioural models. The book was written for students of computer science and software engineering, as well as for programmers and system analysts interested in the behaviour of the systems they work on. It takes readers on a journey from the fundamentals of behavioural modelling to advanced techniques for modelling and analysing sequential and concurrent systems, and thus provides them a deep understanding of the concepts and techniques introduced and how they can be applied to concrete application scenarios.}, language = {en} } @book{LangeBoehmNaumann2010, author = {Lange, Dustin and B{\"o}hm, Christoph and Naumann, Felix}, title = {Extracting structured information from Wikipedia articles to populate infoboxes}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-081-6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-45714}, publisher = {Universit{\"a}t Potsdam}, pages = {27}, year = {2010}, abstract = {Roughly every third Wikipedia article contains an infobox - a table that displays important facts about the subject in attribute-value form. The schema of an infobox, i.e., the attributes that can be expressed for a concept, is defined by an infobox template. Often, authors do not specify all template attributes, resulting in incomplete infoboxes. With iPopulator, we introduce a system that automatically populates infoboxes of Wikipedia articles by extracting attribute values from the article's text. In contrast to prior work, iPopulator detects and exploits the structure of attribute values for independently extracting value parts. We have tested iPopulator on the entire set of infobox templates and provide a detailed analysis of its effectiveness. For instance, we achieve an average extraction precision of 91\% for 1,727 distinct infobox template attributes.}, language = {en} } @book{Lendholt2005, author = {Lendholt, Matthias}, title = {Ressourcenpartitionierung f{\"u}r Grid-Systeme}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-937786-72-4}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33121}, publisher = {Universit{\"a}t Potsdam}, pages = {97}, year = {2005}, abstract = {1 Einleitung 1.1 Motivation 1.2 Aufgabenstellung 1.3 Aufbau der Arbeit 2 Fachliches Umfeld 2.1 Grid Computing 2.2 Idle Time Computing 3 Ressourcenpartitionierung 3.1 Ressourcenpartitionierung und Scheduling 3.2 Ressourcenpartitionierung in Idle Time Computing 3.2.1 Administrative Kontrolle der Ressourcen 3.2.2 Mindestgarantien zur Sicherstellung der Lauff{\"a}higkeit 3.3 Vorhandene L{\"o}sungen und verwandte Arbeiten 3.3.3 Ressourcenmanagement im Globus Toolkit 3.3.4 Ressourcenmanagement in Condor 3.3.5 Das GARA Framework 3.3.6 Distributed Resource Management Application API 3.3.7 Grid Resource Allocation Agreement Protocol 3.3.8 SNAP 3.3.9 OGSI-Agreement 3.3.10 PBS/Maui und andere Batch Systeme 3.3.11 Wide Area Distributed Computing 3.3.12 Weitere verwandte Arbeiten 3.3.13 {\"U}berlegungen zum Ressourcenbedarf 4 Ressourcenkontrolle in Desktopbetriebssystemen 4.1 Ressourcen 4.2 Ressourcenpartitionierung unter Linux 4.2.14 Festplattenkapazit{\"a}t 4.2.15 Arbeitsspeicher 4.2.16 Netzwerkbandbreite 4.2.17 CPU Kapazit{\"a}t 4.3 Ressourcenpartitionierung unter Microsoft Windows XP 4.3.18 Festplattenkapazit{\"a}t 4.3.19 Arbeitsspeicher 4.3.20 Netzwerkbandbreite 4.3.21 CPU Kapazit{\"a}t 4.4 Fazit 5 Entwurf und Design des Frameworks 5.1 Entwurfsgrundlage - Komponentenarchitektur 5.2 Architektur 5.2.22 Broker Server 5.2.23 Broker Software auf den Clients 5.2.24 Schnittstellen 5.3 Komponententypmodell 5.4 Ressourcenidentifikation und Ressourcenzuordnung 5.5 Anbindung ans Grid 5.6 Datenbankentwurf 5.7 XML RPC Schnittstelle 6 Implementierung 6.1 Broker Server 6.1.25 Datenbank 6.1.26 Komponenten 6.1.27 Webserverskripte 6.1.28 Database Crawler 6.2 Komponenten 6.2.29 Network 6.2.30 DSCP 6.2.31 Quota 6.2.32 FSF 6.3 Linux Client 6.3.33 Broker Client 6.3.34 Komponenten 6.4 Windows Client 6.5 Abh{\"a}ngigkeiten 7 Evaluierung 7.1 Durchgef{\"u}hrte Test- und Anwendungsf{\"a}lle 7.1.35 Test der Clientsoftware 7.1.36 Test der Serversoftware 7.1.37 Durchf{\"u}hrbare Anwendungsf{\"a}lle 7.2 Evaluierung der Frameworkimplementierung 7.2.38 Performanz der Serverimplementierung 7.2.39 Zuverl{\"a}ssigkeit der Partitionierungen 7.3 Evaluierung von Traffic Shaping mit iproute2 7.3.40 Szenario 1 7.3.41 Szenario 2 7.3.42 Szenario 3 7.3.43 Fazit 8 Zusammenfassung und Ausblick 8.1 Fazit 8.2 Weiterentwicklung 8.2.44 Weiterentwicklungen auf Entwurfsebene 8.2.45 Weiterentwicklungen auf Implementierungsebene Anhang A: Details zum Datenbankentwurf Anhang B: Bildschirmfotos der Weboberfl{\"a}che Anhang C: Quellcode Linux Broker Client Anhang D: Inhalt des beiliegenden Datentr{\"a}gers}, language = {de} } @book{LinckelsMeinel2005, author = {Linckels, Serge and Meinel, Christoph}, title = {An e-librarian service : natural language interface for an efficient semantic search within multimedia resources}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-937786-89-6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33088}, publisher = {Universit{\"a}t Potsdam}, pages = {40}, year = {2005}, abstract = {1 Introduction 1.1 Project formulation 1.2 Our contribution 2 Pedagogical Aspect 4 2.1 Modern teaching 2.2 Our Contribution 2.2.1 Autonomous and exploratory learning 2.2.2 Human machine interaction 2.2.3 Short multimedia clips 3 Ontology Aspect 3.1 Ontology driven expert systems 3.2 Our contribution 3.2.1 Ontology language 3.2.2 Concept Taxonomy 3.2.3 Knowledge base annotation 3.2.4 Description Logics 4 Natural language approach 4.1 Natural language processing in computer science 4.2 Our contribution 4.2.1 Explored strategies 4.2.2 Word equivalence 4.2.3 Semantic interpretation 4.2.4 Various problems 5 Information Retrieval Aspect 5.1 Modern information retrieval 5.2 Our contribution 5.2.1 Semantic query generation 5.2.2 Semantic relatedness 6 Implementation 6.1 Prototypes 6.2 Semantic layer architecture 6.3 Development 7 Experiments 7.1 Description of the experiments 7.2 General characteristics of the three sessions, instructions and procedure 7.3 First Session 7.4 Second Session 7.5 Third Session 7.6 Discussion and conclusion 8 Conclusion and future work 8.1 Conclusion 8.2 Open questions A Description Logics B Probabilistic context-free grammars}, language = {en} } @book{Luebbe2011, author = {L{\"u}bbe, Alexander}, title = {The effect of tangible media on individuals in business process modeling : a controlled experiment = Der Einfluss greifbarer Medien auf einzelne Personen bei der Gesch{\"a}ftsprozessmodellierung : ein kontrolliertes Experiment}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-108-0}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-49001}, publisher = {Universit{\"a}t Potsdam}, pages = {42}, year = {2011}, abstract = {In current practice, business processes modeling is done by trained method experts. Domain experts are interviewed to elicit their process information but not involved in modeling. We created a haptic toolkit for process modeling that can be used in process elicitation sessions with domain experts. We hypothesize that this leads to more effective process elicitation. This paper brakes down "effective elicitation" to 14 operationalized hypotheses. They are assessed in a controlled experiment using questionnaires, process model feedback tests and video analysis. The experiment compares our approach to structured interviews in a repeated measurement design. We executed the experiment with 17 student clerks from a trade school. They represent potential users of the tool. Six out of fourteen hypotheses showed significant difference due to the method applied. Subjects reported more fun and more insights into process modeling with tangible media. Video analysis showed significantly more reviews and corrections applied during process elicitation. Moreover, people take more time to talk and think about their processes. We conclude that tangible media creates a different working mode for people in process elicitation with fun, new insights and instant feedback on preliminary results.}, language = {en} } @book{MaximovaGieseKrause2017, author = {Maximova, Maria and Giese, Holger and Krause, Christian}, title = {Probabilistic timed graph transformation systems}, number = {118}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-405-0}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-397055}, publisher = {Universit{\"a}t Potsdam}, pages = {34}, year = {2017}, abstract = {Today, software has become an intrinsic part of complex distributed embedded real-time systems. The next generation of embedded real-time systems will interconnect the today unconnected systems via complex software parts and the service-oriented paradigm. Therefore besides timed behavior and probabilistic behaviour also structure dynamics, where the architecture can be subject to changes at run-time, e.g. when dynamic binding of service end-points is employed or complex collaborations are established dynamically, is required. However, a modeling and analysis approach that combines all these necessary aspects does not exist so far. To fill the identified gap, we propose Probabilistic Timed Graph Transformation Systems (PTGTSs) as a high-level description language that supports all the necessary aspects of structure dynamics, timed behavior, and probabilistic behavior. We introduce the formal model of PTGTSs in this paper and present a mapping of models with finite state spaces to probabilistic timed automata (PTA) that allows to use the PRISM model checker to analyze PTGTS models with respect to PTCTL properties.}, language = {en} } @book{MaximovaSchneiderGiese2020, author = {Maximova, Maria and Schneider, Sven and Giese, Holger}, title = {Compositional analysis of probabilistic timed graph transformation systems}, number = {133}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-501-9}, issn = {1613-5652}, doi = {10.25932/publishup-49013}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-490131}, publisher = {Universit{\"a}t Potsdam}, pages = {53}, year = {2020}, abstract = {The analysis of behavioral models is of high importance for cyber-physical systems, as the systems often encompass complex behavior based on e.g. concurrent components with mutual exclusion or probabilistic failures on demand. The rule-based formalism of probabilistic timed graph transformation systems is a suitable choice when the models representing states of the system can be understood as graphs and timed and probabilistic behavior is important. However, model checking PTGTSs is limited to systems with rather small state spaces. We present an approach for the analysis of large scale systems modeled as probabilistic timed graph transformation systems by systematically decomposing their state spaces into manageable fragments. To obtain qualitative and quantitative analysis results for a large scale system, we verify that results obtained for its fragments serve as overapproximations for the corresponding results of the large scale system. Hence, our approach allows for the detection of violations of qualitative and quantitative safety properties for the large scale system under analysis. We consider a running example in which we model shuttles driving on tracks of a large scale topology and for which we verify that shuttles never collide and are unlikely to execute emergency brakes. In our evaluation, we apply an implementation of our approach to the running example.}, language = {en} } @book{MaximovaSchneiderGiese2021, author = {Maximova, Maria and Schneider, Sven and Giese, Holger}, title = {Interval probabilistic timed graph transformation systems}, number = {134}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-502-6}, issn = {1613-5652}, doi = {10.25932/publishup-51289}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-512895}, publisher = {Universit{\"a}t Potsdam}, pages = {58}, year = {2021}, abstract = {The formal modeling and analysis is of crucial importance for software development processes following the model based approach. We present the formalism of Interval Probabilistic Timed Graph Transformation Systems (IPTGTSs) as a high-level modeling language. This language supports structure dynamics (based on graph transformation), timed behavior (based on clocks, guards, resets, and invariants as in Timed Automata (TA)), and interval probabilistic behavior (based on Discrete Interval Probability Distributions). That is, for the probabilistic behavior, the modeler using IPTGTSs does not need to provide precise probabilities, which are often impossible to obtain, but rather provides a probability range instead from which a precise probability is chosen nondeterministically. In fact, this feature on capturing probabilistic behavior distinguishes IPTGTSs from Probabilistic Timed Graph Transformation Systems (PTGTSs) presented earlier. Following earlier work on Interval Probabilistic Timed Automata (IPTA) and PTGTSs, we also provide an analysis tool chain for IPTGTSs based on inter-formalism transformations. In particular, we provide in our tool AutoGraph a translation of IPTGTSs to IPTA and rely on a mapping of IPTA to Probabilistic Timed Automata (PTA) to allow for the usage of the Prism model checker. The tool Prism can then be used to analyze the resulting PTA w.r.t. probabilistic real-time queries asking for worst-case and best-case probabilities to reach a certain set of target states in a given amount of time.}, language = {en} } @book{MeinelDoellnerWeskeetal.2021, author = {Meinel, Christoph and D{\"o}llner, J{\"u}rgen Roland Friedrich and Weske, Mathias and Polze, Andreas and Hirschfeld, Robert and Naumann, Felix and Giese, Holger and Baudisch, Patrick and Friedrich, Tobias and B{\"o}ttinger, Erwin and Lippert, Christoph and D{\"o}rr, Christian and Lehmann, Anja and Renard, Bernhard and Rabl, Tilmann and Uebernickel, Falk and Arnrich, Bert and H{\"o}lzle, Katharina}, title = {Proceedings of the HPI Research School on Service-oriented Systems Engineering 2020 Fall Retreat}, number = {138}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-513-2}, issn = {1613-5652}, doi = {10.25932/publishup-50413}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-504132}, publisher = {Universit{\"a}t Potsdam}, pages = {vi, 144}, year = {2021}, abstract = {Design and Implementation of service-oriented architectures imposes a huge number of research questions from the fields of software engineering, system analysis and modeling, adaptability, and application integration. Component orientation and web services are two approaches for design and realization of complex web-based system. Both approaches allow for dynamic application adaptation as well as integration of enterprise application. Service-Oriented Systems Engineering represents a symbiosis of best practices in object-orientation, component-based development, distributed computing, and business process management. It provides integration of business and IT concerns. The annual Ph.D. Retreat of the Research School provides each member the opportunity to present his/her current state of their research and to give an outline of a prospective Ph.D. thesis. Due to the interdisciplinary structure of the research school, this technical report covers a wide range of topics. These include but are not limited to: Human Computer Interaction and Computer Vision as Service; Service-oriented Geovisualization Systems; Algorithm Engineering for Service-oriented Systems; Modeling and Verification of Self-adaptive Service-oriented Systems; Tools and Methods for Software Engineering in Service-oriented Systems; Security Engineering of Service-based IT Systems; Service-oriented Information Systems; Evolutionary Transition of Enterprise Applications to Service Orientation; Operating System Abstractions for Service-oriented Computing; and Services Specification, Composition, and Enactment.}, language = {en} } @book{MeinelGalbasHageboelling2023, author = {Meinel, Christoph and Galbas, Michael and Hageb{\"o}lling, David}, title = {Digitale Souver{\"a}nit{\"a}t: Erkenntnisse aus dem deutschen Bildungssektor}, number = {156}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-560-6}, issn = {1613-5652}, doi = {10.25932/publishup-59513}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-595138}, publisher = {Universit{\"a}t Potsdam}, pages = {1 -- 29}, year = {2023}, abstract = {Digitale Technologien bieten erhebliche politische, wirtschaftliche und gesellschaftliche Chancen. Zugleich ist der Begriff digitale Souver{\"a}nit{\"a}t zu einem Leitmotiv im deutschen Diskurs {\"u}ber digitale Technologien geworden: das heißt, die F{\"a}higkeit des Staates, seine Verantwortung wahrzunehmen und die Bef{\"a}higung der Gesellschaft - und des Einzelnen - sicherzustellen, die digitale Transformation selbstbestimmt zu gestalten. Exemplarisch f{\"u}r die Herausforderung in Deutschland und Europa, die Vorteile digitaler Technologien zu nutzen und gleichzeitig Souver{\"a}nit{\"a}tsbedenken zu ber{\"u}cksichtigen, steht der Bildungssektor. Er umfasst Bildung als zentrales {\"o}ffentliches Gut, ein schnell aufkommendes Gesch{\"a}ftsfeld und wachsende Best{\"a}nde an hochsensiblen personenbezogenen Daten. Davon ausgehend beschreibt der Bericht Wege zur Entsch{\"a}rfung des Spannungsverh{\"a}ltnisses zwischen Digitalisierung und Souver{\"a}nit{\"a}t auf drei verschiedenen Ebenen - Staat, Wirtschaft und Individuum - anhand konkreter technischer Projekte im Bildungsbereich: die HPI Schul-Cloud (staatliche Souver{\"a}nit{\"a}t), die MERLOT-Datenr{\"a}ume (wirtschaftliche Souver{\"a}nit{\"a}t) und die openHPI-Plattform (individuelle Souver{\"a}nit{\"a}t).}, language = {de} } @book{MeinelGalbasHageboelling2023, author = {Meinel, Christoph and Galbas, Michael and Hageb{\"o}lling, David}, title = {Digital sovereignty: insights from Germany's education sector}, number = {157}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-561-3}, issn = {1613-5652}, doi = {10.25932/publishup-59772}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-597723}, publisher = {Universit{\"a}t Potsdam}, pages = {1 -- 27}, year = {2023}, abstract = {Digital technology offers significant political, economic, and societal opportunities. At the same time, the notion of digital sovereignty has become a leitmotif in German discourse: the state's capacity to assume its responsibilities and safeguard society's - and individuals' - ability to shape the digital transformation in a self-determined way. The education sector is exemplary for the challenge faced by Germany, and indeed Europe, of harnessing the benefits of digital technology while navigating concerns around sovereignty. It encompasses education as a core public good, a rapidly growing field of business, and growing pools of highly sensitive personal data. The report describes pathways to mitigating the tension between digitalization and sovereignty at three different levels - state, economy, and individual - through the lens of concrete technical projects in the education sector: the HPI Schul-Cloud (state sovereignty), the MERLOT data spaces (economic sovereignty), and the openHPI platform (individual sovereignty).}, language = {en} } @book{MeinelGayvoronskayaSchnjakin2018, author = {Meinel, Christoph and Gayvoronskaya, Tatiana and Schnjakin, Maxim}, title = {Blockchain}, number = {124}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-441-8}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414525}, publisher = {Universit{\"a}t Potsdam}, pages = {102}, year = {2018}, abstract = {The term blockchain has recently become a buzzword, but only few know what exactly lies behind this approach. According to a survey, issued in the first quarter of 2017, the term is only known by 35 percent of German medium-sized enterprise representatives. However, the blockchain technology is very interesting for the mass media because of its rapid development and global capturing of different markets. For example, many see blockchain technology either as an all-purpose weapon— which only a few have access to—or as a hacker technology for secret deals in the darknet. The innovation of blockchain technology is found in its successful combination of already existing approaches: such as decentralized networks, cryptography, and consensus models. This innovative concept makes it possible to exchange values in a decentralized system. At the same time, there is no requirement for trust between its nodes (e.g. users). With this study the Hasso Plattner Institute would like to help readers form their own opinion about blockchain technology, and to distinguish between truly innovative properties and hype. The authors of the present study analyze the positive and negative properties of the blockchain architecture and suggest possible solutions, which can contribute to the efficient use of the technology. We recommend that every company define a clear target for the intended application, which is achievable with a reasonable cost-benefit ration, before deciding on this technology. Both the possibilities and the limitations of blockchain technology need to be considered. The relevant steps that must be taken in this respect are summarized /summed up for the reader in this study. Furthermore, this study elaborates on urgent problems such as the scalability of the blockchain, appropriate consensus algorithm and security, including various types of possible attacks and their countermeasures. New blockchains, for example, run the risk of reducing security, as changes to existing technology can lead to lacks in the security and failures. After discussing the innovative properties and problems of the blockchain technology, its implementation is discussed. There are a lot of implementation opportunities for companies available who are interested in the blockchain realization. The numerous applications have either their own blockchain as a basis or use existing and widespread blockchain systems. Various consortia and projects offer "blockchain-as-a-service{\"a}nd help other companies to develop, test and deploy their own applications. This study gives a detailed overview of diverse relevant applications and projects in the field of blockchain technology. As this technology is still a relatively young and fast developing approach, it still lacks uniform standards to allow the cooperation of different systems and to which all developers can adhere. Currently, developers are orienting themselves to Bitcoin, Ethereum and Hyperledger systems, which serve as the basis for many other blockchain applications. The goal is to give readers a clear and comprehensive overview of blockchain technology and its capabilities.}, language = {en} } @book{MeinelJohnWollowski2022, author = {Meinel, Christoph and John, Catrina and Wollowski, Tobias}, title = {Die HPI Schul-Cloud - Von der Vision zur digitale Infrastruktur f{\"u}r deutsche Schulen}, number = {144}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-526-2}, issn = {1613-5652}, doi = {10.25932/publishup-53586}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-535860}, publisher = {Universit{\"a}t Potsdam}, pages = {v, 77}, year = {2022}, abstract = {Digitale Medien sind aus unserem Alltag kaum noch wegzudenken. Einer der zentralsten Bereiche f{\"u}r unsere Gesellschaft, die schulische Bildung, darf hier nicht hintanstehen. Wann immer der Einsatz digital unterst{\"u}tzter Tools p{\"a}dagogisch sinnvoll ist, muss dieser in einem sicheren Rahmen erm{\"o}glicht werden k{\"o}nnen. Die HPI Schul-Cloud ist dieser Vision gefolgt, die vom Nationalen IT-Gipfel 2016 angestoßen wurde und dem Bericht vorangestellt ist - gefolgt. Sie hat sich in den vergangenen f{\"u}nf Jahren vom Pilotprojekt zur unverzichtbaren IT-Infrastruktur f{\"u}r zahlreiche Schulen entwickelt. W{\"a}hrend der Corona-Pandemie hat sie f{\"u}r viele Tausend Schulen wichtige Unterst{\"u}tzung bei der Umsetzung ihres Bildungsauftrags geboten. Das Ziel, eine zukunftssichere und datenschutzkonforme Infrastruktur zur digitalen Unterst{\"u}tzung des Unterrichts zur Verf{\"u}gung zu stellen, hat sie damit mehr als erreicht. Aktuell greifen rund 1,4 Millionen Lehrkr{\"a}fte und Sch{\"u}lerinnen und Sch{\"u}ler bundesweit und an den deutschen Auslandsschulen auf die HPI Schul-Cloud zu.}, language = {de} } @book{MeinelMichaelDengeletal.2024, author = {Meinel, Christoph and Michael, Galbas and Dengel, Andreas and Wendlandt, Matthias}, title = {Konzeption eines integrativen Schulfaches „Digitale Welt" f{\"u}r hessische Schulen}, number = {160}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-582-8}, issn = {1613-5652}, doi = {10.25932/publishup-63911}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-639113}, publisher = {Universit{\"a}t Potsdam}, pages = {34}, year = {2024}, abstract = {Um in der Schule bereits fr{\"u}hzeitig ein Verst{\"a}ndnis f{\"u}r informatische Prozesse zu vermitteln wurde das neue Informatikfach Digitale Welt f{\"u}r die Klassenstufe 5 konzipiert mit der bundesweit einmaligen Verbindung von Informatik mit anwendungsbezogenen und gesellschaftlich relevanten Bez{\"u}gen zur {\"O}kologie und {\"O}konomie. Der Technische Report gibt eine Handreichung zur Einf{\"u}hrung des neuen Faches.}, language = {de} } @book{MeinelPlattnerDoellneretal.2014, author = {Meinel, Christoph and Plattner, Hasso and D{\"o}llner, J{\"u}rgen Roland Friedrich and Weske, Mathias and Polze, Andreas and Hirschfeld, Robert and Naumann, Felix and Giese, Holger and Baudisch, Patrick}, title = {Proceedings of the 7th Ph.D. Retreat of the HPI Research School on Service-oriented Systems Engineering}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-273-5}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-63490}, publisher = {Universit{\"a}t Potsdam}, pages = {ii, 218}, year = {2014}, abstract = {Design and Implementation of service-oriented architectures imposes a huge number of research questions from the fields of software engineering, system analysis and modeling, adaptability, and application integration. Component orientation and web services are two approaches for design and realization of complex web-based system. Both approaches allow for dynamic application adaptation as well as integration of enterprise application. Commonly used technologies, such as J2EE and .NET, form de facto standards for the realization of complex distributed systems. Evolution of component systems has lead to web services and service-based architectures. This has been manifested in a multitude of industry standards and initiatives such as XML, WSDL UDDI, SOAP, etc. All these achievements lead to a new and promising paradigm in IT systems engineering which proposes to design complex software solutions as collaboration of contractually defined software services. Service-Oriented Systems Engineering represents a symbiosis of best practices in object-orientation, component-based development, distributed computing, and business process management. It provides integration of business and IT concerns. The annual Ph.D. Retreat of the Research School provides each member the opportunity to present his/her current state of their research and to give an outline of a prospective Ph.D. thesis. Due to the interdisciplinary structure of the Research Scholl, this technical report covers a wide range of research topics. These include but are not limited to: Self-Adaptive Service-Oriented Systems, Operating System Support for Service-Oriented Systems, Architecture and Modeling of Service-Oriented Systems, Adaptive Process Management, Services Composition and Workflow Planning, Security Engineering of Service-Based IT Systems, Quantitative Analysis and Optimization of Service-Oriented Systems, Service-Oriented Systems in 3D Computer Graphics sowie Service-Oriented Geoinformatics.}, language = {en} } @book{MeinelRenzGrellaetal.2017, author = {Meinel, Christoph and Renz, Jan and Grella, Catrina and Karn, Nils and Hagedorn, Christiane}, title = {Die Cloud f{\"u}r Schulen in Deutschland}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-397-8}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103858}, publisher = {Universit{\"a}t Potsdam}, pages = {50}, year = {2017}, abstract = {Die digitale Entwicklung durchdringt unser Bildungssystem, doch Schulen sind auf die Ver{\"a}nderungen kaum vorbereitet: {\"U}berforderte Lehrer/innen, infrastrukturell schwach ausgestattete Unterrichtsr{\"a}ume und unzureichend gewartete Computernetzwerke sind keine Seltenheit. Veraltete Hard- und Software erschweren digitale Bildung in Schulen eher, als dass sie diese erm{\"o}glichen: Ein zukunftssicherer Ansatz ist es, die Rechner weitgehend aus den Schulen zu entfernen und Bildungsinhalte in eine Cloud zu {\"u}berf{\"u}hren. Zeitgem{\"a}ßer Unterricht ben{\"o}tigt moderne Technologie und eine zukunftsorientierte Infrastruktur. Eine Schul-Cloud (https://hpi.de/schul-cloud) kann dabei helfen, die digitale Transformation in Schulen zu meistern und den f{\"a}cher{\"u}bergreifenden Unterricht mit digitalen Inhalten zu bereichern. Den Sch{\"u}ler/innen und Lehrkr{\"a}ften kann sie viele M{\"o}glichkeiten er{\"o}ffnen: einen einfachen Zugang zu neuesten, professionell gewarteten Anwendungen, die Vernetzung verschiedener Lernorte, Erleichterung von Unterrichtsvorbereitung und Differenzierung. Die Schul-Cloud bietet Flexibilit{\"a}t, f{\"o}rdert die schul- und f{\"a}cher{\"u}bergreifende Anwendbarkeit und schafft eine wichtige Voraussetzung f{\"u}r die gesellschaftliche Teilhabe und Mitgestaltung der digitalen Welt. Neben den technischen Komponenten werden im vorliegenden Bericht ausgew{\"a}hlte Dienste der Schul-Cloud exemplarisch beschrieben und weiterf{\"u}hrende Schritte aufgezeigt. Das in Zusammenarbeit mit zahlreichen Expertinnen und Experten am Hasso-Plattner-Institut (HPI) entwickelte und durch das Bundesministerium f{\"u}r Bildung und Forschung (BMBF) gef{\"o}rderte Konzept einer Schul-Cloud stellt eine wichtige Grundlage f{\"u}r die Einf{\"u}hrung Cloud-basierter Strukturen und -Dienste im Bildungsbereich dar. Gemeinsam mit dem nationalen Excellence-Schulnetzwerk MINT-EC als Kooperationspartner startet ab sofort die Pilotphase. Aufgrund des modularen, skalierbaren Ansatzes der Schul-Cloud kommt dem infrastrukturellen Prototypen langfristig das Potential zu, auch {\"u}ber die begrenzte Anzahl an Pilotschulen hinaus bundesweit effizient eingesetzt zu werden.}, language = {de} } @book{MeinelRenzLuderichetal.2019, author = {Meinel, Christoph and Renz, Jan and Luderich, Matthias and Malyska, Vivien and Kaiser, Konstantin and Oberl{\"a}nder, Arne}, title = {Die HPI Schul-Cloud}, number = {125}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-453-1}, issn = {1613-5652}, doi = {10.25932/publishup-42306}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-423062}, publisher = {Universit{\"a}t Potsdam}, pages = {57}, year = {2019}, abstract = {Die digitale Transformation durchdringt alle gesellschaftlichen Ebenen und Felder, nicht zuletzt auch das Bildungssystem. Dieses ist auf die Ver{\"a}nderungen kaum vorbereitet und begegnet ihnen vor allem auf Basis des Eigenengagements seiner Lehrer*innen. Strukturelle Reaktionen auf den Mangel an qualitativ hochwertigen Fortbildungen, auf schlecht ausgestattete Unterrichtsr{\"a}ume und nicht professionell gewartete Computersysteme gibt es erst seit kurzem. Doch auch wenn Beharrungskr{\"a}fte unter P{\"a}dagog*innen verbreitet sind, erfordert die Transformation des Systems Schule auch eine neue Mentalit{\"a}t und neue Arbeits- und Kooperationsformen. Zeitgem{\"a}ßer Unterricht ben{\"o}tigt moderne Technologie und zeitgem{\"a}ße IT-Architekturen. Nur Systeme, die f{\"u}r Lehrer*innen und Sch{\"u}ler*innen problemlos verf{\"u}gbar, benutzerfreundlich zu bedienen und didaktisch flexibel einsetzbar sind, finden in Schulen Akzeptanz. Hierf{\"u}r haben wir die HPI Schul-Cloud entwickelt. Sie erm{\"o}glicht den einfachen Zugang zu neuesten, professionell gewarteten Anwendungen, verschiedensten digitalen Medien, die Vernetzung verschiedener Lernorte und den rechtssicheren Einsatz von Kommunikations- und Kollaborationstools. Die Entwicklung der HPI Schul-Cloud ist umso notwendiger, als dass rechtliche Anforderungen - insbesondere aus der Datenschutzgrundverordnung der EU herr{\"u}hrend - den Einsatz von Cloud-Anwendungen, die in der Arbeitswelt verbreitet sind, in Schulen unm{\"o}glich machen. Im Bildungsbereich verbreitete Anwendungen sind gr{\"o}ßtenteils technisch veraltet und nicht benutzerfreundlich. Dies n{\"o}tigt die Bundesl{\"a}nder zu kostspieligen Eigenentwicklungen mit Aufw{\"a}nden im zweistelligen Millionenbereich - Projekte die teilweise gescheitert sind. Dank der modularen Micro-Service-Architektur k{\"o}nnen die Bundesl{\"a}nder zuk{\"u}nftig auf die HPI Schul-Cloud als technische Grundlage f{\"u}r ihre Eigen- oder Gemeinschaftsprojekte zur{\"u}ckgreifen. Hierf{\"u}r gilt es, eine nachhaltige Struktur f{\"u}r die Weiterentwicklung der Open-Source-Software HPI Schul-Cloud zu schaffen. Dieser Bericht beschreibt den Entwicklungsstand und die weiteren Perspektiven des Projekts HPI Schul-Cloud im Januar 2019. 96 Schulen deutschlandweit nutzen die HPI Schul-Cloud, bereitgestellt durch das Hasso-Plattner-Institut. Weitere 45 Schulen und Studienseminare nutzen die Nieders{\"a}chsische Bildungscloud, die technisch auf der HPI Schul-Cloud basiert. Das vom Bundesministerium f{\"u}r Bildung und Forschung gef{\"o}rderte Projekt l{\"a}uft in der gegenw{\"a}rtigen Roll-Out-Phase bis zum 31. Juli 2021. Gemeinsam mit unserem Kooperationspartner MINT-EC streben wir an, die HPI Schul-Cloud m{\"o}glichst an allen Schulen des Netzwerks einzusetzen.}, language = {de} } @book{MeinelSackBross2008, author = {Meinel, Christoph and Sack, Harald and Bross, Justus}, title = {Erster Deutscher IPv6 Gipfel}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-32865}, publisher = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {Inhalt: KOMMUNIQU{\´E} GRUßWORT PROGRAMM HINTERGR{\"U}NDE UND FAKTEN REFERENTEN: BIOGRAFIE \& VOTRAGSZUSAMMENFASSUNG 1.) DER ERSTE DEUTSCHE IPV6 GIPFEL AM HASSO PLATTNER INSTITUT IN POTSDAM - PROF. DR. CHRISTOPH MEINEL - VIVIANE REDING 2.) IPV6, ITS TIME HAS COME - VINTON CERF 3.) DIE BEDEUTUNG VON IPV6 F{\"U}R DIE {\"O}FFENTLICHE VERWALTUNG IN DEUTSCHLAND - MARTIN SCHALLBRUCH 4.) TOWARDS THE FUTURE OF THE INTERNET - PROF. DR. LUTZ HEUSER 5.) IPV6 STRATEGY \& DEPLOYMENT STATUS IN JAPAN - HIROSHI MIYATA 6.) IPV6 STRATEGY \& DEPLOYMENT STATUS IN CHINA - PROF. WU HEQUAN 7.) IPV6 STRATEGY AND DEPLOYMENT STATUS IN KOREA - DR. EUNSOOK KIM 8.) IPV6 DEPLOYMENT EXPERIENCES IN GREEK SCHOOL NETWORK - ATHANASSIOS LIAKOPOULOS 9.) IPV6 NETWORK MOBILITY AND IST USAGE - JEAN-MARIE BONNIN 10.) IPV6 - R{\"U}STZEUG F{\"U}R OPERATOR \& ISP IPV6 DEPLOYMENT UND STRATEGIEN DER DEUTSCHEN TELEKOM - HENNING GROTE 11.) VIEW FROM THE IPV6 DEPLOYMENT FRONTLINE - YVES POPPE 12.) DEPLOYING IPV6 IN MOBILE ENVIRONMENTS - WOLFGANG FRITSCHE 13.) PRODUCTION READY IPV6 FROM CUSTOMER LAN TO THE INTERNET - LUTZ DONNERHACKE 14.) IPV6 - DIE BASIS F{\"U}R NETZWERKZENTRIERTE OPERATIONSF{\"U}HRUNG (NETOPF{\"U}) IN DER BUNDESWEHR HERAUSFORDERUNGEN - ANWENDUNGSFALLBETRACHTUNGEN - AKTIVIT{\"A}TEN - CARSTEN HATZIG 15.) WINDOWS VISTA \& IPV6 - BERND OURGHANLIAN 16.) IPV6 \& HOME NETWORKING TECHINCAL AND BUSINESS CHALLENGES - DR. TAYEB BEN MERIEM 17.) DNS AND DHCP FOR DUAL STACK NETWORKS - LAWRENCE HUGHES 18.) CAR INDUSTRY: GERMAN EXPERIENCE WITH IPV6 - AMARDEO SARMA 19.) IPV6 \& AUTONOMIC NETWORKING - RANGANAI CHAPARADZA 20.) P2P \& GRID USING IPV6 AND MOBILE IPV6 - DR. LATIF LADID}, language = {en} } @book{MeinelSchnjakinMetzkeetal.2014, author = {Meinel, Christoph and Schnjakin, Maxim and Metzke, Tobias and Freitag, Markus}, title = {Anbieter von Cloud Speicherdiensten im {\"U}berblick}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-274-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68780}, publisher = {Universit{\"a}t Potsdam}, pages = {84}, year = {2014}, abstract = {Durch die immer st{\"a}rker werdende Flut an digitalen Informationen basieren immer mehr Anwendungen auf der Nutzung von kosteng{\"u}nstigen Cloud Storage Diensten. Die Anzahl der Anbieter, die diese Dienste zur Verf{\"u}gung stellen, hat sich in den letzten Jahren deutlich erh{\"o}ht. Um den passenden Anbieter f{\"u}r eine Anwendung zu finden, m{\"u}ssen verschiedene Kriterien individuell ber{\"u}cksichtigt werden. In der vorliegenden Studie wird eine Auswahl an Anbietern etablierter Basic Storage Diensten vorgestellt und miteinander verglichen. F{\"u}r die Gegen{\"u}berstellung werden Kriterien extrahiert, welche bei jedem der untersuchten Anbieter anwendbar sind und somit eine m{\"o}glichst objektive Beurteilung erlauben. Hierzu geh{\"o}ren unter anderem Kosten, Recht, Sicherheit, Leistungsf{\"a}higkeit sowie bereitgestellte Schnittstellen. Die vorgestellten Kriterien k{\"o}nnen genutzt werden, um Cloud Storage Anbieter bez{\"u}glich eines konkreten Anwendungsfalles zu bewerten.}, language = {de} } @book{MeinelThomasWarschofskyetal.2011, author = {Meinel, Christoph and Thomas, Ivonne and Warschofsky, Robert and Menzel, Michael and Junker, Holger and Schwenk, J{\"o}rg and Roth, Volker and Peters, Jan and Raepple, Martin and St{\"o}rtkuhl, Thomas and Quint, Bruno and Kleinhenz, Michael and Wagner, Daniel}, title = {SOA Security 2010 : Symposium f{\"u}r Sicherheit in Service-orientierten Architekturen ; 28. / 29. Oktober 2010 am Hasso-Plattner-Institut}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-110-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-49696}, publisher = {Universit{\"a}t Potsdam}, pages = {80}, year = {2011}, abstract = {"Forschung meets Business" - diese Kombination hat in den vergangenen Jahren immer wieder zu zahlreichen interessanten und fruchtbaren Diskussionen gef{\"u}hrt. Mit dem Symposium "Sicherheit in Service-orientierten Architekturen" f{\"u}hrt das Hasso-Plattner-Institut diese Tradition fort und lud alle Interessenten zu einem zweit{\"a}gigen Symposium nach Potsdam ein, um gemeinsam mit Fachvertretern aus der Forschung und Industrie {\"u}ber die aktuellen Entwicklungen im Bereich Sicherheit von SOA zu diskutieren. Die im Rahmen dieses Symposiums vorgestellten Beitr{\"a}ge fokussieren sich auf die Sicherheitsthemen "Sichere Digitale Identit{\"a}ten und Identit{\"a}tsmanagement", "Trust Management", "Modell-getriebene SOA-Sicherheit", "Datenschutz und Privatsph{\"a}re", "Sichere Enterprise SOA", und "Sichere IT-Infrastrukturen".}, language = {de} } @book{MeinelWillems2014, author = {Meinel, Christoph and Willems, Christian}, title = {openHPI : 哈索•普拉特纳研究院的 MOOC（大规模公开在线课）计划}, number = {89}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-291-9}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70380}, publisher = {Universit{\"a}t Potsdam}, pages = {22}, year = {2014}, abstract = {摘要。哈索•普拉特纳研究院 (HPI) 的新型互动在线教育平台 openHPI (https://openHPI.de) 可以为从事信息技术和信息学领域内容的工作和感兴趣的学员提供可自由访问的、免费的在线课程。与斯坦福大学于 2011 年首推，之后也在美国其他精英大学提供的"网络公开群众课"（简称 MOOC）一样，openHPI 同样在互联网中提供学习视频和阅读材料，其中综合了支持学习的自我测试、家庭作业和社交讨论论坛，并刺激对促进学习的虚拟学习团队的培训。与"传统的"讲座平台，比如 tele-TASK 平台 (http://www.tele-task.de) 不同（在该平台中，可调用以多媒体方式记录的和已准备好的讲座），openHPI 提供的是按教学法准备的在线课程。这些课程的开始时间固定，之后在连续六个课程周稳定的提供以多媒体方式准备的、尽可能可以互动的学习材料。每周讲解课程主题的一章。为此在该周开始前会准备一系列学习视频、文字、自我测试和家庭作业材料，课程学员在该周将精力用于处理这些内容。这些计划与一个社交讨论平台相结合，学员在该平台上可以与课程导师和其他学员交换意见、解答问题和讨论更多主题。当然，学员可以自己决定学习活动的类型和范围。他们可以为课程作出自己的贡献，比如在论坛中引用博文或推文。之后其他学员可以评论、讨论或自己扩展这些博文或推文。这样学员、教师和提供的学习内容就在一个虚拟的团体中与社交学习网络相互结合起来。}, language = {de} } @book{MeinelWillems2013, author = {Meinel, Christoph and Willems, Christian}, title = {openHPI : the MOOC offer at Hasso Plattner Institute}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-264-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-67176}, publisher = {Universit{\"a}t Potsdam}, pages = {21}, year = {2013}, abstract = {The new interactive online educational platform openHPI, (https://openHPI.de) from Hasso Plattner Institute (HPI), offers freely accessible courses at no charge for all who are interested in subjects in the field of information technology and computer science. Since 2011, "Massive Open Online Courses," called MOOCs for short, have been offered, first at Stanford University and then later at other U.S. elite universities. Following suit, openHPI provides instructional videos on the Internet and further reading material, combined with learning-supportive self-tests, homework and a social discussion forum. Education is further stimulated by the support of a virtual learning community. In contrast to "traditional" lecture platforms, such as the tele-TASK portal (http://www.tele-task.de) where multimedia recorded lectures are available on demand, openHPI offers didactic online courses. The courses have a fixed start date and offer a balanced schedule of six consecutive weeks presented in multimedia and, whenever possible, interactive learning material. Each week, one chapter of the course subject is treated. In addition, a series of learning videos, texts, self-tests and homework exercises are provided to course participants at the beginning of the week. The course offering is combined with a social discussion platform where participants have the opportunity to enter into an exchange with course instructors and fellow participants. Here, for example, they can get answers to questions and discuss the topics in depth. The participants naturally decide themselves about the type and range of their learning activities. They can make personal contributions to the course, for example, in blog posts or tweets, which they can refer to in the forum. In turn, other participants have the chance to comment on, discuss or expand on what has been said. In this way, the learners become the teachers and the subject matter offered to a virtual community is linked to a social learning network.}, language = {en} } @book{MeinelWillems2013, author = {Meinel, Christoph and Willems, Christian}, title = {openHPI : das MOOC-Angebot des Hasso-Plattner-Instituts}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-259-9}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66802}, publisher = {Universit{\"a}t Potsdam}, pages = {22}, year = {2013}, abstract = {Die neue interaktive Online-Bildungsplattform openHPI (https://openHPI.de) des Hasso-Plattner-Instituts (HPI) bietet frei zug{\"a}ngliche und kostenlose Onlinekurse f{\"u}r interessierte Teilnehmer an, die sich mit Inhalten aus dem Bereich der Informationstechnologien und Informatik besch{\"a}ftige¬n. Wie die seit 2011 zun{\"a}chst von der Stanford University, sp{\"a}ter aber auch von anderen Elite-Universit{\"a}ten der USA angeboten „Massive Open Online Courses", kurz MOOCs genannt, bietet openHPI im Internet Lernvideos und weiterf{\"u}hrenden Lesestoff in einer Kombination mit lernunterst{\"u}tzenden Selbsttests, Hausaufgaben und einem sozialen Diskussionsforum an und stimuliert die Ausbildung einer das Lernen f{\"o}rdernden virtuellen Lerngemeinschaft. Im Unterschied zu „traditionellen" Vorlesungsportalen, wie z.B. dem tele-TASK Portal (http://www.tele-task.de), bei dem multimedial aufgezeichnete Vorlesungen zum Abruf bereit gestellt werden, bietet openHPI didaktisch aufbereitete Onlinekurse an. Diese haben einen festen Starttermin und bieten dann in einem austarierten Zeitplan von sechs aufeinanderfolgenden Kurswochen multimedial aufbereitete und wann immer m{\"o}glich interaktive Lehrmaterialien. In jeder Woche wird ein Kapitel des Kursthemas behandelt. Dazu werden zu Wochenbeginn eine Reihe von Lehrvideos, Texten, Selbsttests und ein Hausaufgabenblatt bereitgestellt, mit denen sich die Kursteilnehmer in dieser Woche besch{\"a}ftigen. Kombiniert sind die Angebote mit einer sozialen Diskussionsplattform, auf der sich die Teilnehmer mit den Kursbetreuern und anderen Teilnehmern austauschen, Fragen kl{\"a}ren und weiterf{\"u}hrende Themen diskutieren k{\"o}nnen. Nat{\"u}rlich entscheiden die Teilnehmer selbst {\"u}ber Art und Umfang ihrer Lernaktivit{\"a}ten. Sie k{\"o}nnen in den Kurs eigene Beitr{\"a}ge einbringen, zum Beispiel durch Blogposts oder Tweets, auf die sie im Forum verweisen. Andere Lernende k{\"o}nnen diese dann kommentieren, diskutieren oder ihrerseits erweitern. Auf diese Weise werden die Lernenden, die Lehrenden und die angebotenen Lerninhalte in einer virtuellen Gemeinschaft, einem sozialen Lernnetzwerk miteinander verkn{\"u}pft.}, language = {de} } @book{MeinelWillemsRoschkeetal.2011, author = {Meinel, Christoph and Willems, Christian and Roschke, Sebastian and Schnjakin, Maxim}, title = {Virtualisierung und Cloud Computing : Konzepte, Technologiestudie, Markt{\"u}bersicht}, isbn = {978-3-86956-113-4}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-49708}, publisher = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Virtualisierung und Cloud Computing geh{\"o}ren derzeit zu den wichtigsten Schlagworten f{\"u}r Betreiber von IT Infrastrukturen. Es gibt eine Vielzahl unterschiedlicher Technologien, Produkte und Gesch{\"a}ftsmodelle f{\"u}r vollkommen verschiedene Anwendungsszenarien. Die vorliegende Studie gibt zun{\"a}chst einen detaillierten {\"U}berblick {\"u}ber aktuelle Entwicklungen in Konzepten und Technologien der Virtualisierungstechnologie - von klassischer Servervirtualisierung {\"u}ber Infrastrukturen f{\"u}r virtuelle Arbeitspl{\"a}tze bis zur Anwendungsvirtualisierung und macht den Versuch einer Klassifikation der Virtualisierungsvarianten. Bei der Betrachtung des Cloud Computing-Konzepts werden deren Grundz{\"u}ge sowie verschiedene Architekturvarianten und Anwendungsf{\"a}lle eingef{\"u}hrt. Die ausf{\"u}hrliche Untersuchung von Vorteilen des Cloud Computing sowie m{\"o}glicher Bedenken, die bei der Nutzung von Cloud-Ressourcen im Unternehmen beachtet werden m{\"u}ssen, zeigt, dass Cloud Computing zwar große Chancen bietet, aber nicht f{\"u}r jede Anwendung und nicht f{\"u}r jeden rechtlichen und wirtschaftlichen Rahmen in Frage kommt.. Die anschließende Markt{\"u}bersicht f{\"u}r Virtualisierungstechnologie zeigt, dass die großen Hersteller - Citrix, Microsoft und VMware - jeweils Produkte f{\"u}r fast alle Virtualisierungsvarianten anbieten und hebt entscheidende Unterschiede bzw. die St{\"a}rken der jeweiligen Anbieter heraus. So ist beispielsweise die L{\"o}sung von Citrix f{\"u}r Virtual Desktop Infrastructures sehr ausgereift, w{\"a}hrend Microsoft hier nur auf Standardtechnologie zur{\"u}ckgreifen kann. VMware hat als Marktf{\"u}hrer die gr{\"o}ßte Verbreitung in Rechenzentren gefunden und bietet als einziger Hersteller echte Fehlertoleranz. Microsoft hingegen punktet mit der nahtlosen Integration ihrer Virtualisierungsprodukte in bestehende Windows-Infrastrukturen. Im Bereich der Cloud Computing-Systeme zeigen sich einige quelloffene Softwareprojekte, die durchaus f{\"u}r den produktiven Betrieb von sogenannten privaten Clouds geeignet sind.}, language = {de} } @book{MeinelWillemsStaubitzetal.2022, author = {Meinel, Christoph and Willems, Christian and Staubitz, Thomas and Sauer, Dominic and Hagedorn, Christiane}, title = {openHPI}, number = {148}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-544-6}, issn = {1613-5652}, doi = {10.25932/publishup-56020}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560208}, publisher = {Universit{\"a}t Potsdam}, pages = {125}, year = {2022}, abstract = {On the occasion of the 10th openHPI anniversary, this technical report provides information about the HPI MOOC platform, including its core features, technology, and architecture. In an introduction, the platform family with all partner platforms is presented; these now amount to nine platforms, including openHPI. This section introduces openHPI as an advisor and research partner in various projects. In the second chapter, the functionalities and common course formats of the platform are presented. The functionalities are divided into learner and admin features. The learner features section provides detailed information about performance records, courses, and the learning materials of which a course is composed: videos, texts, and quizzes. In addition, the learning materials can be enriched by adding external exercise tools that communicate with the HPI MOOC platform via the Learning Tools Interoperability (LTI) standard. Furthermore, the concept of peer assessments completed the possible learning materials. The section then proceeds with further information on the discussion forum, a fundamental concept of MOOCs compared to traditional e-learning offers. The section is concluded with a description of the quiz recap, learning objectives, mobile applications, gameful learning, and the help desk. The next part of this chapter deals with the admin features. The described functionality is restricted to describing the news and announcements, dashboards and statistics, reporting capabilities, research options with A/B testing, the course feed, and the TransPipe tool to support the process of creating automated or manual subtitles. The platform supports a large variety of additional features, but a detailed description of these features goes beyond the scope of this report. The chapter then elaborates on common course formats and openHPI teaching activities at the HPI. The chapter concludes with some best practices for course design and delivery. The third chapter provides insights into the technology and architecture behind openHPI. A special characteristic of the openHPI project is the conscious decision to operate the complete application from bare metal to platform development. Hence, the chapter starts with a section about the openHPI Cloud, including detailed information about the data center and devices, the used cloud software OpenStack and Ceph, as well as the openHPI Cloud Service provided for the HPI. Afterward, a section on the application technology stack and development tooling describes the application infrastructure components, the used automation, the deployment pipeline, and the tools used for monitoring and alerting. The chapter is concluded with detailed information about the technology stack and concrete platform implementation details. The section describes the service-oriented Ruby on Rails application, inter-service communication, and public APIs. It also provides more information on the design system and components used in the application. The section concludes with a discussion of the original microservice architecture, where we share our insights and reasoning for migrating back to a monolithic application. The last chapter provides a summary and an outlook on the future of digital education.}, language = {en} } @book{MeinelWillemsStaubitzetal.2022, author = {Meinel, Christoph and Willems, Christian and Staubitz, Thomas and Sauer, Dominic and Hagedorn, Christiane}, title = {openHPI}, number = {150}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-546-0}, issn = {1613-5652}, doi = {10.25932/publishup-56179}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-561792}, publisher = {Universit{\"a}t Potsdam}, pages = {86}, year = {2022}, abstract = {Anl{\"a}sslich des 10-j{\"a}hrigen Jubil{\"a}ums von openHPI informiert dieser technische Bericht {\"u}ber die HPI-MOOC-Plattform einschließlich ihrer Kernfunktionen, Technologie und Architektur. In einer Einleitung wird die Plattformfamilie mit allen Partnerplattformen vorgestellt; diese belaufen sich inklusive openHPI aktuell auf neun Plattformen. In diesem Abschnitt wird außerdem gezeigt, wie openHPI als Berater und Forschungspartner in verschiedenen Projekten fungiert. Im zweiten Kapitel werden die Funktionalit{\"a}ten und g{\"a}ngigen Kursformate der Plattform pr{\"a}sentiert. Die Funktionalit{\"a}ten sind in Lerner- und Admin-Funktionen unterteilt. Der Bereich Lernerfunktionen bietet detaillierte Informationen zu Leistungsnachweisen, Kursen und den Lernmaterialien, aus denen sich ein Kurs zusammensetzt: Videos, Texte und Quiz. Dar{\"u}ber hinaus k{\"o}nnen die Lernmaterialien durch externe {\"U}bungstools angereichert werden, die {\"u}ber den Standard Learning Tools Interoperability (LTI) mit der HPI MOOC-Plattform kommunizieren. Das Konzept der Peer-Assessments rundet die m{\"o}glichen Lernmaterialien ab. Der Abschnitt geht dann weiter auf das Diskussionsforum ein, das einen grundlegenden Unterschied von MOOCs im Vergleich zu traditionellen E-Learning-Angeboten darstellt. Zum Abschluss des Abschnitts folgen eine Beschreibung von Quiz-Recap, Lernzielen, mobilen Anwendungen, spielerischen Lernens und dem Helpdesk. Der n{\"a}chste Teil dieses Kapitels besch{\"a}ftigt sich mit den Admin-Funktionen. Die Funktionalit{\"a}tsbeschreibung beschr{\"a}nkt sich Neuigkeiten und Ank{\"u}ndigungen, Dashboards und Statistiken, Berichtsfunktionen, Forschungsoptionen mit A/B-Tests, den Kurs-Feed und das TransPipe-Tool zur Unterst{\"u}tzung beim Erstellen von automatischen oder manuellen Untertiteln. Die Plattform unterst{\"u}tzt außerdem eine Vielzahl zus{\"a}tzlicher Funktionen, doch eine detaillierte Beschreibung dieser Funktionen w{\"u}rde den Rahmen des Berichts sprengen. Das Kapitel geht dann auf g{\"a}ngige Kursformate und openHPI-Lehrveranstaltungen am HPI ein, bevor es mit einigen Best Practices f{\"u}r die Gestaltung und Durchf{\"u}hrung von Kursen schließt. Zum Abschluss des technischen Berichts gibt das letzte Kapitel eine Zusammenfassung und einen Ausblick auf die Zukunft der digitalen Bildung. Ein besonderes Merkmal des openHPI-Projekts ist die bewusste Entscheidung, die komplette Anwendung von den physischen Netzwerkkomponenten bis zur Plattformentwicklung eigenst{\"a}ndig zu betreiben. Bei der vorliegenden deutschen Variante handelt es sich um eine gek{\"u}rzte {\"U}bersetzung des technischen Berichts 148, bei der kein Einblick in die Technologien und Architektur von openHPI gegeben wird. Interessierte Leser:innen k{\"o}nnen im technischen Bericht 148 (vollst{\"a}ndige englische Version) detaillierte Informationen zum Rechenzentrum und den Ger{\"a}ten, der Cloud-Software und dem openHPI Cloud Service aber auch zu Infrastruktur-Anwendungskomponenten wie Entwicklungstools, Automatisierung, Deployment-Pipeline und Monitoring erhalten. Außerdem finden sich dort weitere Informationen {\"u}ber den Technologiestack und konkrete Implementierungsdetails der Plattform inklusive der serviceorientierten Ruby on Rails-Anwendung, die Kommunikation zwischen den Diensten, {\"o}ffentliche APIs, sowie Designsystem und -komponenten. Der Abschnitt schließt mit einer Diskussion {\"u}ber die urspr{\"u}ngliche Microservice-Architektur und die Migration zu einer monolithischen Anwendung.}, language = {de} } @book{MeyerPufahlFahlandetal.2013, author = {Meyer, Andreas and Pufahl, Luise and Fahland, Dirk and Weske, Mathias}, title = {Modeling and enacting complex data dependencies in business processes}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-245-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-65103}, publisher = {Universit{\"a}t Potsdam}, pages = {40}, year = {2013}, abstract = {Enacting business processes in process engines requires the coverage of control flow, resource assignments, and process data. While the first two aspects are well supported in current process engines, data dependencies need to be added and maintained manually by a process engineer. Thus, this task is error-prone and time-consuming. In this report, we address the problem of modeling processes with complex data dependencies, e.g., m:n relationships, and their automatic enactment from process models. First, we extend BPMN data objects with few annotations to allow data dependency handling as well as data instance differentiation. Second, we introduce a pattern-based approach to derive SQL queries from process models utilizing the above mentioned extensions. Therewith, we allow automatic enactment of data-aware BPMN process models. We implemented our approach for the Activiti process engine to show applicability.}, language = {en} } @book{MeyerSmirnovWeske2011, author = {Meyer, Andreas and Smirnov, Sergey and Weske, Mathias}, title = {Data in business processes}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-144-8}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-53046}, publisher = {Universit{\"a}t Potsdam}, pages = {40}, year = {2011}, abstract = {Process and data are equally important for business process management. Process data is especially relevant in the context of automated business processes, process controlling, and representation of organizations' core assets. One can discover many process modeling languages, each having a specific set of data modeling capabilities and the level of data awareness. The level of data awareness and data modeling capabilities vary significantly from one language to another. This paper evaluates several process modeling languages with respect to the role of data. To find a common ground for comparison, we develop a framework, which systematically organizes process- and data-related aspects of the modeling languages elaborating on the data aspects. Once the framework is in place, we compare twelve process modeling languages against it. We generalize the results of the comparison and identify clusters of similar languages with respect to data awareness.}, language = {de} } @book{MeyerWeske2014, author = {Meyer, Andreas and Weske, Mathias}, title = {Weak conformance between process models and synchronized object life cycles}, number = {91}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-303-9}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71722}, publisher = {Universit{\"a}t Potsdam}, pages = {31}, year = {2014}, abstract = {Process models specify behavioral execution constraints between activities as well as between activities and data objects. A data object is characterized by its states and state transitions represented as object life cycle. For process execution, all behavioral execution constraints must be correct. Correctness can be verified via soundness checking which currently only considers control flow information. For data correctness, conformance between a process model and its object life cycles is checked. Current approaches abstract from dependencies between multiple data objects and require fully specified process models although, in real-world process repositories, often underspecified models are found. Coping with these issues, we introduce the concept of synchronized object life cycles and we define a mapping of data constraints of a process model to Petri nets extending an existing mapping. Further, we apply the notion of weak conformance to process models to tell whether each time an activity needs to access a data object in a particular state, it is guaranteed that the data object is in or can reach the expected state. Then, we introduce an algorithm for an integrated verification of control flow correctness and weak data conformance using soundness checking.}, language = {en} } @book{MeyerKuropka2005, author = {Meyer, Harald and Kuropka, Dominik}, title = {Requirements for service composition}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-937786-81-0}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33096}, publisher = {Universit{\"a}t Potsdam}, pages = {27}, year = {2005}, abstract = {1 Introduction 2 Use case Scenario 3 General Composition Requirements 4 Functional Requirements of Service Composition 5 Non-Functional Requirements 6 Conclusion}, language = {en} } @book{NeuhausPolzeChowdhuryy2011, author = {Neuhaus, Christian and Polze, Andreas and Chowdhuryy, Mohammad M. R.}, title = {Survey on healthcare IT systems : standards, regulations and security}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-128-8}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51463}, publisher = {Universit{\"a}t Potsdam}, pages = {53}, year = {2011}, abstract = {IT systems for healthcare are a complex and exciting field. One the one hand, there is a vast number of improvements and work alleviations that computers can bring to everyday healthcare. Some ways of treatment, diagnoses and organisational tasks were even made possible by computer usage in the first place. On the other hand, there are many factors that encumber computer usage and make development of IT systems for healthcare a challenging, sometimes even frustrating task. These factors are not solely technology-related, but just as well social or economical conditions. This report describes some of the idiosyncrasies of IT systems in the healthcare domain, with a special focus on legal regulations, standards and security.}, language = {en} } @book{NeumannGiese2013, author = {Neumann, Stefan and Giese, Holger}, title = {Scalable compatibility for embedded real-time components via language progressive timed automata}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-226-1}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-63853}, publisher = {Universit{\"a}t Potsdam}, pages = {vi, 67}, year = {2013}, abstract = {The proper composition of independently developed components of an embedded real- time system is complicated due to the fact that besides the functional behavior also the non-functional properties and in particular the timing have to be compatible. Nowadays related compatibility problems have to be addressed in a cumbersome integration and configuration phase at the end of the development process, that in the worst case may fail. Therefore, a number of formal approaches have been developed, which try to guide the upfront decomposition of the embedded real-time system into components such that integration problems related to timing properties can be excluded and that suitable configurations can be found. However, the proposed solutions require a number of strong assumptions that can be hardly fulfilled or the required analysis does not scale well. In this paper, we present an approach based on timed automata that can provide the required guarantees for the later integration without strong assumptions, which are difficult to match in practice. The approach provides a modular reasoning scheme that permits to establish the required guarantees for the integration employing only local checks, which therefore also scales. It is also possible to determine potential configuration settings by means of timed game synthesis.}, language = {de} } @book{Nicolai2005, author = {Nicolai, Johannes}, title = {Sichere Ausf{\"u}hrung nicht vertrauensw{\"u}rdiger Programme : Evaluation verschiedener Ans{\"a}tze und Einsatz an vier Fallbeispielen}, isbn = {978-3-937786-73-5}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33101}, publisher = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {Vorwort 1. Einleitung 2. Statische vs. dynamische Analyse 3. Kriterien f{\"u}r den Erfolg statischer Quellcodeanalysemethoden 3.1. Theoretische Vor{\"u}berlegungen 3.2. 1. Kriterium: Verf{\"u}gbarkeit des Quellcodes 3.3. 2. Kriterium: Unterst{\"u}tzung der Programmiersprache 3.4. 3. Kriterium: Zulassung von „echten" Programmen der Problemdom{\"a}ne 3.5. 4. Kriterium: Bew{\"a}ltigung der auftretenden Komplexit{\"a}t 3.6. 5. Kriterium: Schutz vor b{\"o}swilliger Speichermanipulation 3.7. 6. Kriterium: Garantie f{\"u}r die Umgebung des laufenden Prozesses 3.8. Fazit 3.9. Verwandte Arbeiten 4. Bewertung von statischen Methoden f{\"u}r C/C++ typische Programme 4.1. Hintergrund 4.2. Pr{\"a}missen 4.3. 1. Problemfeld: Programmgr{\"o}ße und Interferenz 4.4. 2. Problemfeld: Semantik 4.5. 3. Problemfeld: Programmfluss 4.6. 4. Problemfeld: Zeigerarithmetik 4.7. Dynamische Konzepte zur Erf{\"u}llung des f{\"u}nften Kriteriums auf Quellcodebasis 4.8. Fazit 4.9. Verwandte Arbeiten 5. Kriterien f{\"u}r den Erfolg dynamischer Ans{\"a}tze 5.1. Hintergrund 5.2. Verf{\"u}gbarkeit des Quellcodes 5.3. Unterst{\"u}tzung der Programmiersprache 5.4. Zulassung von „echten" Programmen aus der Problemdom{\"a}ne 5.5. Bew{\"a}ltigung der auftretenden Komplexit{\"a}t 5.6. Schutz vor b{\"o}swilliger Speichermanipulation 5.7. Garantie f{\"u}r die Umgebung des laufenden Prozesses 5.8. Fazit 6. Klassifikation und Evaluation dynamischer Ans{\"a}tze 6.1. Hintergrund 6.2. Quellcodesubstitution 6.3. Bin{\"a}rcodemodifikation/Binary-Rewriting 6.4. Maschinencodeinterpreter 6.5. Intrusion-Detection-Systeme 6.6. Virtuelle Maschinen/Safe Languages 6.7. Mechanismen zur „H{\"a}rtung" von bestehenden Code 6.8. SandBoxing/System-Call-Interposition 6.9. Herk{\"o}mmliche Betriebssystemmittel 6.10. Access-Control-Lists/Domain-Type-Enforcement 6.11. Fazit 7. Sichere Ausf{\"u}hrung nicht vertrauensw{\"u}rdiger Programme im Kontext von RealTimeBattle 7.1. Vorstellung von RealTimeBattle 7.2. Charakterisierung des Problems 7.3. Alternative L{\"o}sungsvarianten/Rekapitulation 7.4. {\"U}bertragung der Ergebnisse statischer Analysemethoden auf RealTimeBattle 7.5. {\"U}bertragung der Ergebnisse dynamischer Analysemethoden auf RealTimeBattle 7.5.1. Vorstellung der RSBAC basierten L{\"o}sung 7.5.2. Vorstellung der Systrace basierten L{\"o}sung 7.6. Fazit 7.7. Verwandte Arbeiten 8. Sichere Ausf{\"u}hrung nicht vertrauensw{\"u}rdiger Programme im Kontext von Asparagus 8.1. Vorstellung von Asparagus 8.2. Charakterisierung des Problems 8.3. L{\"o}sung des Problems 8.4. Fazit 8.5. Verwandte Arbeiten 9. Sichere Ausf{\"u}hrung nicht vertrauensw{\"u}rdiger Programme im Kontext vom DCL 9.1. Vorstellung des DCL 9.2. Charakterisierung des Problems 9.3. Experimente im DCL und die jeweilige L{\"o}sung 9.3.1. Foucaultsches Pendel 9.3.2. Lego Mindstorm Roboter 9.3.3. Hau den Lukas 9.4. Fazit 9.5. Verwandte Arbeiten 10. Sichere Ausf{\"u}hrung nicht vertrauensw{\"u}rdiger Programme im Kontext der semiautomatischen Korrektur von Betriebssystemarchitektur-{\"U}bungsaufgaben 10.1. Vorstellung des {\"U}bungsbetriebes zur Vorlesung „Betriebssystsemarchitektur 10.2. Charakterisierung des Problems 10.3. L{\"o}sungsvorschl{\"a}ge 10.3.1. L{\"o}sungsvorschl{\"a}ge f{\"u}r das Authentifizierungs-Problem 10.3.2. L{\"o}sungsvorschl{\"a}ge f{\"u}r das Transport-Problem 10.3.3. L{\"o}sungsvorschl{\"a}ge f{\"u}r das Build-Problem 10.3.4. L{\"o}sungsvorschl{\"a}ge f{\"u}r das Ausf{\"u}hrungs-Problem 10.3.5. L{\"o}sungsvorschl{\"a}ge f{\"u}r das Ressourcen-Problem 10.3.6. L{\"o}sungsvorschl{\"a}ge f{\"u}r das Portabilit{\"a}ts-Problem 10.4. Fazit 10.5. Verwandte Arbeiten 11. Schlussbetrachtungen Literaturverzeichnis Anhang -create_guardedrobot.sh: Die RealTimeBattle Security Infrastructure -vuln.c: Ein durch Puffer{\"u}berlauf ausnutzbares Programm -exploit.c: Ein Beispielexploit f{\"u}r vuln.c. -aufg43.c: L{\"o}sung f{\"u}r eine Aufgabe im Rahmen der Betriebssystemarchitektur-{\"U}bung -Handout: Sichere Ausf{\"u}hrung nicht vertrauensw{\"u}rdiger Programme}, language = {de} } @book{NienhausGoochDoellner2006, author = {Nienhaus, Marc and Gooch, Bruce and D{\"o}llner, J{\"u}rgen Roland Friedrich}, title = {Visualizing movement dynamics in virtual urban environments}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-939469-52-0}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33065}, publisher = {Universit{\"a}t Potsdam}, pages = {7}, year = {2006}, abstract = {Dynamics in urban environments encompasses complex processes and phenomena such as related to movement (e.g.,traffic, people) and development (e.g., construction, settlement). This paper presents novel methods for creating human-centric illustrative maps for visualizing the movement dynamics in virtual 3D environments. The methods allow a viewer to gain rapid insight into traffic density and flow. The illustrative maps represent vehicle behavior as light threads. Light threads are a familiar visual metaphor caused by moving light sources producing streaks in a long-exposure photograph. A vehicle's front and rear lights produce light threads that convey its direction of motion as well as its velocity and acceleration. The accumulation of light threads allows a viewer to quickly perceive traffic flow and density. The light-thread technique is a key element to effective visualization systems for analytic reasoning, exploration, and monitoring of geospatial processes.}, language = {en} } @book{NiephausFelgentreffHirschfeld2017, author = {Niephaus, Fabio and Felgentreff, Tim and Hirschfeld, Robert}, title = {Squimera}, number = {120}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-422-7}, doi = {10.25932/publishup-40338}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-403387}, publisher = {Universit{\"a}t Potsdam}, pages = {92}, year = {2017}, abstract = {Programmierwerkzeuge, die verschiedene Programmiersprachen unterst{\"u}tzen und sich konsistent bedienen lassen, sind hilfreich f{\"u}r Softwareentwickler, weil diese sich nicht erst mit neuen Werkzeugen vertraut machen m{\"u}ssen, wenn sie in einer neuen Sprache entwickeln wollen. Außerdem ist es n{\"u}tzlich, verschiedene Programmiersprachen in einer Anwendung kombinieren zu k{\"o}nnen, da Entwickler dann Softwareframeworks und -bibliotheken nicht in der jeweiligen Sprache nachbauen m{\"u}ssen und stattdessen bestehende Software wiederverwenden k{\"o}nnen. Dennoch haben Entwickler eine sehr große Auswahl, wenn sie nach Werkzeugen suchen, die teilweise zudem speziell nur f{\"u}r eine Sprache ausgelegt sind. Einige integrierte Entwicklungsumgebungen unterst{\"u}tzen verschiedene Programmiersprachen, k{\"o}nnen aber h{\"a}ufig keine konsistente Bedienung ihrer Werkzeuge gew{\"a}hrleisten, da die jeweiligen Ausf{\"u}hrungsumgebungen der Sprachen zu verschieden sind. Dar{\"u}ber hinaus gibt es bereits Mechansimen, die es erlauben, Programme aus anderen Sprachen in einem Programm wiederzuverwenden. Dazu werden h{\"a}ufig das Betriebssystem oder eine Netzwerkverbindung verwendet. Programmierwerkzeuge unterst{\"u}tzen jedoch h{\"a}ufig eine solche Indirektion nicht und sind deshalb nur eingeschr{\"a}nkt nutzbar bei beispielsweise Debugging Szenarien. In dieser Arbeit stellen wir einen neuartigen Ansatz vor, der das Programmiererlebnis in Bezug auf das Arbeiten mit mehreren dynamischen Programmiersprachen verbessern soll. Dazu verwenden wir die Werkzeuge einer Smalltalk Programmierumgebung wieder und entwickeln eine virtuelle Ausf{\"u}hrungsumgebung, die verschiedene Sprachen gleichermaßen unterst{\"u}tzt. Der auf unserem Ansatz basierende Prototyp Squimera demonstriert, dass es m{\"o}glich ist, Programmierwerkzeuge in der Art wiederzuverwenden, sodass sie sich f{\"u}r verschiedene Programmiersprachen gleich verhalten und somit die Arbeit f{\"u}r Entwickler vereinfachen. Außerdem erm{\"o}glicht Squimera einfaches Wiederverwenden und dar{\"u}ber hinaus das Verschmischen von in unterschiedlichen Sprachen geschriebenen Softwarebibliotheken und -frameworks und erlaubt dabei zus{\"a}tzlich Debugging {\"u}ber mehrere Sprachen hinweg.}, language = {en} } @book{OttoPollakWerneretal.2015, author = {Otto, Philipp and Pollak, Jaqueline and Werner, Daniel and Wolff, Felix and Steinert, Bastian and Thamsen, Lauritz and Taeumel, Marcel and Lincke, Jens and Krahn, Robert and Ingalls, Daniel H. H. and Hirschfeld, Robert}, title = {Exploratives Erstellen von interaktiven Inhalten in einer dynamischen Umgebung​}, number = {101}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-346-6}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-83806}, publisher = {Universit{\"a}t Potsdam}, pages = {vii, 115}, year = {2015}, abstract = {Bei der Erstellung von Visualisierungen gibt es im Wesentlichen zwei Ans{\"a}tze. Zum einen k{\"o}nnen mit geringem Aufwand schnell Standarddiagramme erstellt werden. Zum anderen gibt es die M{\"o}glichkeit, individuelle und interaktive Visualisierungen zu programmieren. Dies ist jedoch mit einem deutlich h{\"o}heren Aufwand verbunden. Flower erm{\"o}glicht eine schnelle Erstellung individueller und interaktiver Visualisierungen, indem es den Entwicklungssprozess stark vereinfacht und die Nutzer bei den einzelnen Aktivit{\"a}ten wie dem Import und der Aufbereitung von Daten, deren Abbildung auf visuelle Elemente sowie der Integration von Interaktivit{\"a}t direkt unterst{\"u}tzt.}, language = {de} } @book{PapeTrefferHirschfeldetal.2013, author = {Pape, Tobias and Treffer, Arian and Hirschfeld, Robert and Haupt, Michael}, title = {Extending a Java Virtual Machine to Dynamic Object-oriented Languages}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-266-7}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-67438}, publisher = {Universit{\"a}t Potsdam}, pages = {163}, year = {2013}, abstract = {There are two common approaches to implement a virtual machine (VM) for a dynamic object-oriented language. On the one hand, it can be implemented in a C-like language for best performance and maximum control over the resulting executable. On the other hand, it can be implemented in a language such as Java that allows for higher-level abstractions. These abstractions, such as proper object-oriented modularization, automatic memory management, or interfaces, are missing in C-like languages but they can simplify the implementation of prevalent but complex concepts in VMs, such as garbage collectors (GCs) or just-in-time compilers (JITs). Yet, the implementation of a dynamic object-oriented language in Java eventually results in two VMs on top of each other (double stack), which impedes performance. For statically typed languages, the Maxine VM solves this problem; it is written in Java but can be executed without a Java virtual machine (JVM). However, it is currently not possible to execute dynamic object-oriented languages in Maxine. This work presents an approach to bringing object models and execution models of dynamic object-oriented languages to the Maxine VM and the application of this approach to Squeak/Smalltalk. The representation of objects in and the execution of dynamic object-oriented languages pose certain challenges to the Maxine VM that lacks certain variation points necessary to enable an effortless and straightforward implementation of dynamic object-oriented languages' execution models. The implementation of Squeak/Smalltalk in Maxine as a feasibility study is to unveil such missing variation points.}, language = {en} } @book{PlattnerZeier2012, author = {Plattner, Hasso and Zeier, Alexander}, title = {In-Memory Data Management}, publisher = {Springer}, address = {Wiesbaden}, isbn = {978-3-8349-4378-1}, publisher = {Universit{\"a}t Potsdam}, pages = {200}, year = {2012}, abstract = {Nach 50 Jahren erfolgreicher Entwicklunghat die Business-IT einen neuenWendepunkt erreicht. Hier zeigen die Autoren erstmalig, wieIn-Memory Computing dieUnternehmensprozesse k{\"u}nftig ver{\"a}ndern wird. Bisher wurden Unternehmensdaten aus Performance-Gr{\"u}nden auf verschiedene Datenbanken verteilt: Analytische Datenresidieren in Data Warehouses und werden regelm{\"a}ßig mithilfe transaktionaler Systeme synchronisiert. Diese Aufspaltung macht flexibles Echtzeit-Reporting aktueller Daten unm{\"o}glich. Doch dank leistungsf{\"a}higerMulti-Core-CPUs, großer Hauptspeicher, Cloud Computing und immerbesserer mobiler Endger{\"a}te lassen die Unternehmen dieses restriktive Modell zunehmend hinter sich. Die Autoren stellen Techniken vor, die eine analytische und transaktionale Verarbeitung in Echtzeit erlauben und so dem Gesch{\"a}ftsleben neue Wege bahnen.}, language = {de} } @book{PolyvyanyySmirnovWeske2008, author = {Polyvyanyy, Artem and Smirnov, Sergey and Weske, Mathias}, title = {Reducing the complexity of large EPCs}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-32959}, publisher = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {Inhalt: 1 Introduction 2 Motivation and Goal 3 Fundamentals 4 Elementary Abstractions 5 Real World Example 6 Conclusions}, language = {en} } @book{PolyvyanyySmirnovWeske2008, author = {Polyvyanyy, Artem and Smirnov, Sergey and Weske, Mathias}, title = {The triconnected abstraction of process models}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-940793-65-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-32847}, publisher = {Universit{\"a}t Potsdam}, pages = {17}, year = {2008}, abstract = {Contents: Artem Polyvanny, Sergey Smirnow, and Mathias Weske The Triconnected Abstraction of Process Models 1 Introduction 2 Business Process Model Abstraction 3 Preliminaries 4 Triconnected Decomposition 4.1 Basic Approach for Process Component Discovery 4.2 SPQR-Tree Decomposition 4.3 SPQR-Tree Fragments in the Context of Process Models 5 Triconnected Abstraction 5.1 Abstraction Rules 5.2 Abstraction Algorithm 6 Related Work and Conclusions}, language = {en} } @book{PolzeSchnor2005, author = {Polze, Andreas and Schnor, Bettina}, title = {Grid-Computing : [Seminar im Sommersemester 2003]}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-937786-28-7}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33162}, publisher = {Universit{\"a}t Potsdam}, pages = {1-34 ; 2-36}, year = {2005}, abstract = {1. Applikationen f{\"u}r weitverteiltes Rechnen Dennis Klemann, Lars Schmidt-Bielicke, Philipp Seuring 2. Das Globus-Toolkit Dietmar Bremser, Alexis Krepp, Tobias Rausch 3. Open Grid Services Architecture Lars Trieloff 4. Condor, Condor-G, Classad Stefan Henze, Kai K{\"o}hne 5. The Cactus Framework Thomas Hille, Martin Karlsch 6. High Performance Scheduler mit Maui/PBS Ole Weidner, J{\"o}rg Schummer, Benedikt Meuthrath 7. Bandbreiten-Monitoring mit NWS Alexander Ritter, Gregor H{\"o}fert 8. The Paradyn Parallel Performance Measurement Tool Jens Ulferts, Christian Liesegang 9. Grid-Applikationen in der Praxis Steffen Bach, Michael Blume, Helge Issel}, language = {de} } @book{PufahlMeyerWeske2013, author = {Pufahl, Luise and Meyer, Andreas and Weske, Mathias}, title = {Batch regions : process instance synchronization based on data}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-280-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-69081}, publisher = {Universit{\"a}t Potsdam}, pages = {18}, year = {2013}, abstract = {Business process automation improves organizations' efficiency to perform work. In existing business process management systems, process instances run independently from each other. However, synchronizing instances carrying similar characteristics, i.e., sharing the same data, can reduce process execution costs. For example, if an online retailer receives two orders from one customer, there is a chance that they can be packed and shipped together to save shipment costs. In this paper, we use concepts from the database domain and introduce data views to business processes to identify instances which can be synchronized. Based on data views, we introduce the concept of batch regions for a context-aware instance synchronization over a set of connected activities. We also evaluate the concepts introduced in this paper with a case study comparing costs for normal and batch processing.}, language = {de} } @book{RanaMohapatraSidorovaetal.2022, author = {Rana, Kaushik and Mohapatra, Durga Prasad and Sidorova, Julia and Lundberg, Lars and Sk{\"o}ld, Lars and Lopes Grim, Lu{\´i}s Fernando and Sampaio Gradvohl, Andr{\´e} Leon and Cremerius, Jonas and Siegert, Simon and Weltzien, Anton von and Baldi, Annika and Klessascheck, Finn and Kalancha, Svitlana and Lichtenstein, Tom and Shaabani, Nuhad and Meinel, Christoph and Friedrich, Tobias and Lenzner, Pascal and Schumann, David and Wiese, Ingmar and Sarna, Nicole and Wiese, Lena and Tashkandi, Araek Sami and van der Walt, Est{\´e}e and Eloff, Jan H. P. and Schmidt, Christopher and H{\"u}gle, Johannes and Horschig, Siegfried and Uflacker, Matthias and Najafi, Pejman and Sapegin, Andrey and Cheng, Feng and Stojanovic, Dragan and Stojnev Ilić, Aleksandra and Djordjevic, Igor and Stojanovic, Natalija and Predic, Bratislav and Gonz{\´a}lez-Jim{\´e}nez, Mario and de Lara, Juan and Mischkewitz, Sven and Kainz, Bernhard and van Hoorn, Andr{\´e} and Ferme, Vincenzo and Schulz, Henning and Knigge, Marlene and Hecht, Sonja and Prifti, Loina and Krcmar, Helmut and Fabian, Benjamin and Ermakova, Tatiana and Kelkel, Stefan and Baumann, Annika and Morgenstern, Laura and Plauth, Max and Eberhard, Felix and Wolff, Felix and Polze, Andreas and Cech, Tim and Danz, Noel and Noack, Nele Sina and Pirl, Lukas and Beilharz, Jossekin Jakob and De Oliveira, Roberto C. L. and Soares, F{\´a}bio Mendes and Juiz, Carlos and Bermejo, Belen and M{\"u}hle, Alexander and Gr{\"u}ner, Andreas and Saxena, Vageesh and Gayvoronskaya, Tatiana and Weyand, Christopher and Krause, Mirko and Frank, Markus and Bischoff, Sebastian and Behrens, Freya and R{\"u}ckin, Julius and Ziegler, Adrian and Vogel, Thomas and Tran, Chinh and Moser, Irene and Grunske, Lars and Sz{\´a}rnyas, G{\´a}bor and Marton, J{\´o}zsef and Maginecz, J{\´a}nos and Varr{\´o}, D{\´a}niel and Antal, J{\´a}nos Benjamin}, title = {HPI Future SOC Lab - Proceedings 2018}, number = {151}, editor = {Meinel, Christoph and Polze, Andreas and Beins, Karsten and Strotmann, Rolf and Seibold, Ulrich and R{\"o}dszus, Kurt and M{\"u}ller, J{\"u}rgen}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-547-7}, issn = {1613-5652}, doi = {10.25932/publishup-56371}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-563712}, publisher = {Universit{\"a}t Potsdam}, pages = {x, 277}, year = {2022}, abstract = {The "HPI Future SOC Lab" is a cooperation of the Hasso Plattner Institute (HPI) and industry partners. Its mission is to enable and promote exchange and interaction between the research community and the industry partners. The HPI Future SOC Lab provides researchers with free of charge access to a complete infrastructure of state of the art hard and software. This infrastructure includes components, which might be too expensive for an ordinary research environment, such as servers with up to 64 cores and 2 TB main memory. The offerings address researchers particularly from but not limited to the areas of computer science and business information systems. Main areas of research include cloud computing, parallelization, and In-Memory technologies. This technical report presents results of research projects executed in 2018. Selected projects have presented their results on April 17th and November 14th 2017 at the Future SOC Lab Day events.}, language = {en} } @book{ReschkeTaeumelPapeetal.2018, author = {Reschke, Jakob and Taeumel, Marcel and Pape, Tobias and Niephaus, Fabio and Hirschfeld, Robert}, title = {Towards version control in object-based systems}, volume = {121}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-430-2}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-410812}, publisher = {Universit{\"a}t Potsdam}, pages = {100}, year = {2018}, abstract = {Version control is a widely used practice among software developers. It reduces the risk of changing their software and allows them to manage different configurations and to collaborate with others more efficiently. This is amplified by code sharing platforms such as GitHub or Bitbucket. Most version control systems track files (e.g., Git, Mercurial, and Subversion do), but some programming environments do not operate on files, but on objects instead (many Smalltalk implementations do). Users of such environments want to use version control for their objects anyway. Specialized version control systems, such as the ones available for Smalltalk systems (e.g., ENVY/Developer and Monticello), focus on a small subset of objects that can be versioned. Most of these systems concentrate on the tracking of methods, classes, and configurations of these. Other user-defined and user-built objects are either not eligible for version control at all, tracking them involves complicated workarounds, or a fixed, domain-unspecific serialization format is used that does not equally suit all kinds of objects. Moreover, these version control systems that are specific to a programming environment require their own code sharing platforms; popular, well-established platforms for file-based version control systems cannot be used or adapter solutions need to be implemented and maintained. To improve the situation for version control of arbitrary objects, a framework for tracking, converting, and storing of objects is presented in this report. It allows editions of objects to be stored in an exchangeable, existing backend version control system. The platforms of the backend version control system can thus be reused. Users and objects have control over how objects are captured for the purpose of version control. Domain-specific requirements can be implemented. The storage format (i.e. the file format, when file-based backend version control systems are used) can also vary from one object to another. Different editions of objects can be compared and sets of changes can be applied to graphs of objects. A generic way for capturing and restoring that supports most kinds of objects is described. It models each object as a collection of slots. Thus, users can begin to track their objects without first having to implement version control supplements for their own kinds of objects. The proposed architecture is evaluated using a prototype implementation that can be used to track objects in Squeak/Smalltalk with Git. The prototype improves the suboptimal standing of user objects with respect to version control described above and also simplifies some version control tasks for classes and methods as well. It also raises new problems, which are discussed in this report as well.}, language = {en} } @book{RoggeSoltiMansvanderAalstetal.2013, author = {Rogge-Solti, Andreas and Mans, Ronny S. and van der Aalst, Wil M. P. and Weske, Mathias}, title = {Repairing event logs using stochastic process models}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-258-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66797}, publisher = {Universit{\"a}t Potsdam}, pages = {19}, year = {2013}, abstract = {Companies strive to improve their business processes in order to remain competitive. Process mining aims to infer meaningful insights from process-related data and attracted the attention of practitioners, tool-vendors, and researchers in recent years. Traditionally, event logs are assumed to describe the as-is situation. But this is not necessarily the case in environments where logging may be compromised due to manual logging. For example, hospital staff may need to manually enter information regarding the patient's treatment. As a result, events or timestamps may be missing or incorrect. In this paper, we make use of process knowledge captured in process models, and provide a method to repair missing events in the logs. This way, we facilitate analysis of incomplete logs. We realize the repair by combining stochastic Petri nets, alignments, and Bayesian networks. We evaluate the results using both synthetic data and real event data from a Dutch hospital.}, language = {en} } @book{Scheer2019, author = {Scheer, August-Wilhelm}, title = {Was macht das Hasso-Plattner-Institut f{\"u}r Digital Engineering zu einer Besonderheit?}, number = {131}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-481-4}, issn = {1613-5652}, doi = {10.25932/publishup-43923}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439232}, publisher = {Universit{\"a}t Potsdam}, pages = {17}, year = {2019}, language = {de} } @book{ScherbaumMzhavanadzeArometal.2020, author = {Scherbaum, Frank and Mzhavanadze, Nana and Arom, Simha and Rosenzweig, Sebastian and M{\"u}ller, Meinard}, title = {Tonal Organization of the Erkomaishvili Dataset: Pitches, Scales, Melodies and Harmonies}, series = {Computational Analysis Of Traditional Georgian Vocal Music}, journal = {Computational Analysis Of Traditional Georgian Vocal Music}, number = {1}, editor = {Scherbaum, Frank}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {2702-2641}, doi = {10.25932/publishup-47614}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476141}, publisher = {Universit{\"a}t Potsdam}, pages = {64}, year = {2020}, abstract = {In this study we examine the tonal organization of a series of recordings of liturgical chants, sung in 1966 by the Georgian master singer Artem Erkomaishvili. This dataset is the oldest corpus of Georgian chants from which the time synchronous F0-trajectories for all three voices have been reliably determined (M{\"u}ller et al. 2017). It is therefore of outstanding importance for the understanding of the tuning principles of traditional Georgian vocal music. The aim of the present study is to use various computational methods to analyze what these recordings can contribute to the ongoing scientific dispute about traditional Georgian tuning systems. Starting point for the present analysis is the re-release of the original audio data together with estimated fundamental frequency (F0) trajectories for each of the three voices, beat annotations, and digital scores (Rosenzweig et al. 2020). We present synoptic models for the pitch and the harmonic interval distributions, which are the first of such models for which the complete Erkomaishvili dataset was used. We show that these distributions can be very compactly be expressed as Gaussian mixture models, anchored on discrete sets of pitch or interval values for the pitch and interval distributions, respectively. As part of our study we demonstrate that these pitch values, which we refer to as scale pitches, and which are determined as the mean values of the Gaussian mixture elements, define the scale degrees of the melodic sound scales which build the skeleton of Artem Erkomaishvili's intonation. The observation of consistent pitch bending of notes in melodic phrases, which appear in identical form in a group of chants, as well as the observation of harmonically driven intonation adjustments, which are clearly documented for all pure harmonic intervals, demonstrate that Artem Erkomaishvili intentionally deviates from the scale pitch skeleton quite freely. As a central result of our study, we proof that this melodic freedom is always constrained by the attracting influence of the scale pitches. Deviations of the F0-values of individual note events from the scale pitches at one instance of time are compensated for in the subsequent melodic steps. This suggests a deviation-compensation mechanism at the core of Artem Erkomaishvili's melody generation, which clearly honors the scales but still allows for a large degree of melodic flexibility. This model, which summarizes all partial aspects of our analysis, is consistent with the melodic scale models derived from the observed pitch distributions, as well as with the melodic and harmonic interval distributions. In addition to the tangible results of our work, we believe that our work has general implications for the determination of tuning models from audio data, in particular for non-tempered music.}, language = {en} } @book{SchmiedgenRhinowKoeppenetal.2015, author = {Schmiedgen, Jan and Rhinow, Holger and K{\"o}ppen, Eva and Meinel, Christoph}, title = {Parts without a whole?}, number = {97}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-334-3}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-79969}, publisher = {Universit{\"a}t Potsdam}, pages = {143}, year = {2015}, abstract = {This explorative study gives a descriptive overview of what organizations do and experience when they say they practice design thinking. It looks at how the concept has been appropriated in organizations and also describes patterns of design thinking adoption. The authors use a mixed-method research design fed by two sources: questionnaire data and semi-structured personal expert interviews. The study proceeds in six parts: (1) design thinking¹s entry points into organizations; (2) understandings of the descriptor; (3) its fields of application and organizational localization; (4) its perceived impact; (5) reasons for its discontinuation or failure; and (6) attempts to measure its success. In conclusion the report challenges managers to be more conscious of their current design thinking practice. The authors suggest a co-evolution of the concept¹s introduction with innovation capability building and the respective changes in leadership approaches. It is argued that this might help in unfolding design thinking¹s hidden potentials as well as preventing unintended side-effects such as discontented teams or the dwindling authority of managers.}, language = {en} } @book{SchneiderLambersOrejas2017, author = {Schneider, Sven and Lambers, Leen and Orejas, Fernando}, title = {Symbolic model generation for graph properties}, number = {115}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-396-1}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103171}, publisher = {Universit{\"a}t Potsdam}, pages = {48}, year = {2017}, abstract = {Graphs are ubiquitous in Computer Science. For this reason, in many areas, it is very important to have the means to express and reason about graph properties. In particular, we want to be able to check automatically if a given graph property is satisfiable. Actually, in most application scenarios it is desirable to be able to explore graphs satisfying the graph property if they exist or even to get a complete and compact overview of the graphs satisfying the graph property. We show that the tableau-based reasoning method for graph properties as introduced by Lambers and Orejas paves the way for a symbolic model generation algorithm for graph properties. Graph properties are formulated in a dedicated logic making use of graphs and graph morphisms, which is equivalent to firstorder logic on graphs as introduced by Courcelle. Our parallelizable algorithm gradually generates a finite set of so-called symbolic models, where each symbolic model describes a set of finite graphs (i.e., finite models) satisfying the graph property. The set of symbolic models jointly describes all finite models for the graph property (complete) and does not describe any finite graph violating the graph property (sound). Moreover, no symbolic model is already covered by another one (compact). Finally, the algorithm is able to generate from each symbolic model a minimal finite model immediately and allows for an exploration of further finite models. The algorithm is implemented in the new tool AutoGraph.}, language = {en} } @book{SchneiderLambersOrejas2019, author = {Schneider, Sven and Lambers, Leen and Orejas, Fernando}, title = {A logic-based incremental approach to graph repair}, number = {126}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-462-3}, issn = {1613-5652}, doi = {10.25932/publishup-42751}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427517}, publisher = {Universit{\"a}t Potsdam}, pages = {34}, year = {2019}, abstract = {Graph repair, restoring consistency of a graph, plays a prominent role in several areas of computer science and beyond: For example, in model-driven engineering, the abstract syntax of models is usually encoded using graphs. Flexible edit operations temporarily create inconsistent graphs not representing a valid model, thus requiring graph repair. Similarly, in graph databases—managing the storage and manipulation of graph data—updates may cause that a given database does not satisfy some integrity constraints, requiring also graph repair. We present a logic-based incremental approach to graph repair, generating a sound and complete (upon termination) overview of least-changing repairs. In our context, we formalize consistency by so-called graph conditions being equivalent to first-order logic on graphs. We present two kind of repair algorithms: State-based repair restores consistency independent of the graph update history, whereas deltabased (or incremental) repair takes this history explicitly into account. Technically, our algorithms rely on an existing model generation algorithm for graph conditions implemented in AutoGraph. Moreover, the delta-based approach uses the new concept of satisfaction (ST) trees for encoding if and how a graph satisfies a graph condition. We then demonstrate how to manipulate these STs incrementally with respect to a graph update.}, language = {en} } @book{SchneiderMaximovaGiese2022, author = {Schneider, Sven and Maximova, Maria and Giese, Holger}, title = {Invariant Analysis for Multi-Agent Graph Transformation Systems using k-Induction}, number = {143}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-531-6}, issn = {1613-5652}, doi = {10.25932/publishup-54585}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-545851}, publisher = {Universit{\"a}t Potsdam}, pages = {37}, year = {2022}, abstract = {The analysis of behavioral models such as Graph Transformation Systems (GTSs) is of central importance in model-driven engineering. However, GTSs often result in intractably large or even infinite state spaces and may be equipped with multiple or even infinitely many start graphs. To mitigate these problems, static analysis techniques based on finite symbolic representations of sets of states or paths thereof have been devised. We focus on the technique of k-induction for establishing invariants specified using graph conditions. To this end, k-induction generates symbolic paths backwards from a symbolic state representing a violation of a candidate invariant to gather information on how that violation could have been reached possibly obtaining contradictions to assumed invariants. However, GTSs where multiple agents regularly perform actions independently from each other cannot be analyzed using this technique as of now as the independence among backward steps may prevent the gathering of relevant knowledge altogether. In this paper, we extend k-induction to GTSs with multiple agents thereby supporting a wide range of additional GTSs. As a running example, we consider an unbounded number of shuttles driving on a large-scale track topology, which adjust their velocity to speed limits to avoid derailing. As central contribution, we develop pruning techniques based on causality and independence among backward steps and verify that k-induction remains sound under this adaptation as well as terminates in cases where it did not terminate before.}, language = {en} } @book{SchneiderMaximovaGiese2022, author = {Schneider, Sven and Maximova, Maria and Giese, Holger}, title = {Probabilistic metric temporal graph logic}, number = {146}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-532-3}, issn = {1613-5652}, doi = {10.25932/publishup-54586}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-545867}, publisher = {Universit{\"a}t Potsdam}, pages = {34}, year = {2022}, abstract = {Cyber-physical systems often encompass complex concurrent behavior with timing constraints and probabilistic failures on demand. The analysis whether such systems with probabilistic timed behavior adhere to a given specification is essential. When the states of the system can be represented by graphs, the rule-based formalism of Probabilistic Timed Graph Transformation Systems (PTGTSs) can be used to suitably capture structure dynamics as well as probabilistic and timed behavior of the system. The model checking support for PTGTSs w.r.t. properties specified using Probabilistic Timed Computation Tree Logic (PTCTL) has been already presented. Moreover, for timed graph-based runtime monitoring, Metric Temporal Graph Logic (MTGL) has been developed for stating metric temporal properties on identified subgraphs and their structural changes over time. In this paper, we (a) extend MTGL to the Probabilistic Metric Temporal Graph Logic (PMTGL) by allowing for the specification of probabilistic properties, (b) adapt our MTGL satisfaction checking approach to PTGTSs, and (c) combine the approaches for PTCTL model checking and MTGL satisfaction checking to obtain a Bounded Model Checking (BMC) approach for PMTGL. In our evaluation, we apply an implementation of our BMC approach in AutoGraph to a running example.}, language = {en} } @book{SchneiderMaximovaGiese2021, author = {Schneider, Sven and Maximova, Maria and Giese, Holger}, title = {Probabilistic metric temporal graph logic}, number = {140}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-517-0}, issn = {1613-5652}, doi = {10.25932/publishup-51506}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-515066}, publisher = {Universit{\"a}t Potsdam}, pages = {40}, year = {2021}, abstract = {Cyber-physical systems often encompass complex concurrent behavior with timing constraints and probabilistic failures on demand. The analysis whether such systems with probabilistic timed behavior adhere to a given specification is essential. When the states of the system can be represented by graphs, the rule-based formalism of Probabilistic Timed Graph Transformation Systems (PTGTSs) can be used to suitably capture structure dynamics as well as probabilistic and timed behavior of the system. The model checking support for PTGTSs w.r.t. properties specified using Probabilistic Timed Computation Tree Logic (PTCTL) has been already presented. Moreover, for timed graph-based runtime monitoring, Metric Temporal Graph Logic (MTGL) has been developed for stating metric temporal properties on identified subgraphs and their structural changes over time. In this paper, we (a) extend MTGL to the Probabilistic Metric Temporal Graph Logic (PMTGL) by allowing for the specification of probabilistic properties, (b) adapt our MTGL satisfaction checking approach to PTGTSs, and (c) combine the approaches for PTCTL model checking and MTGL satisfaction checking to obtain a Bounded Model Checking (BMC) approach for PMTGL. In our evaluation, we apply an implementation of our BMC approach in AutoGraph to a running example.}, language = {en} } @book{SchreiberKrahnIngallsetal.2016, author = {Schreiber, Robin and Krahn, Robert and Ingalls, Daniel H. H. and Hirschfeld, Robert}, title = {Transmorphic}, number = {110}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-387-9}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98300}, publisher = {Universit{\"a}t Potsdam}, pages = {100}, year = {2016}, abstract = {Defining Graphical User Interfaces (GUIs) through functional abstractions can reduce the complexity that arises from mutable abstractions. Recent examples, such as Facebook's React GUI framework have shown, how modelling the view as a functional projection from the application state to a visual representation can reduce the number of interacting objects and thus help to improve the reliabiliy of the system. This however comes at the price of a more rigid, functional framework where programmers are forced to express visual entities with functional abstractions, detached from the way one intuitively thinks about the physical world. In contrast to that, the GUI Framework Morphic allows interactions in the graphical domain, such as grabbing, dragging or resizing of elements to evolve an application at runtime, providing liveness and directness in the development workflow. Modelling each visual entity through mutable abstractions however makes it difficult to ensure correctness when GUIs start to grow more complex. Furthermore, by evolving morphs at runtime through direct manipulation we diverge more and more from the symbolic description that corresponds to the morph. Given that both of these approaches have their merits and problems, is there a way to combine them in a meaningful way that preserves their respective benefits? As a solution for this problem, we propose to lift Morphic's concept of direct manipulation from the mutation of state to the transformation of source code. In particular, we will explore the design, implementation and integration of a bidirectional mapping between the graphical representation and a functional and declarative symbolic description of a graphical user interface within a self hosted development environment. We will present Transmorphic, a functional take on the Morphic GUI Framework, where the visual and structural properties of morphs are defined in a purely functional, declarative fashion. In Transmorphic, the developer is able to assemble different morphs at runtime through direct manipulation which is automatically translated into changes in the code of the application. In this way, the comprehensiveness and predictability of direct manipulation can be used in the context of a purely functional GUI, while the effects of the manipulation are reflected in a medium that is always in reach for the programmer and can even be used to incorporate the source transformations into the source files of the application.}, language = {en} } @book{SchwalbKruegerPlattner2013, author = {Schwalb, David and Kr{\"u}ger, Jens and Plattner, Hasso}, title = {Cache conscious column organization in in-memory column stores}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-228-5}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-63890}, publisher = {Universit{\"a}t Potsdam}, pages = {v, 84}, year = {2013}, abstract = {Cost models are an essential part of database systems, as they are the basis of query performance optimization. Based on predictions made by cost models, the fastest query execution plan can be chosen and executed or algorithms can be tuned and optimised. In-memory databases shifts the focus from disk to main memory accesses and CPU costs, compared to disk based systems where input and output costs dominate the overall costs and other processing costs are often neglected. However, modelling memory accesses is fundamentally different and common models do not apply anymore. This work presents a detailed parameter evaluation for the plan operators scan with equality selection, scan with range selection, positional lookup and insert in in-memory column stores. Based on this evaluation, a cost model based on cache misses for estimating the runtime of the considered plan operators using different data structures is developed. Considered are uncompressed columns, bit compressed and dictionary encoded columns with sorted and unsorted dictionaries. Furthermore, tree indices on the columns and dictionaries are discussed. Finally, partitioned columns consisting of one partition with a sorted and one with an unsorted dictionary are investigated. New values are inserted in the unsorted dictionary partition and moved periodically by a merge process to the sorted partition. An efficient attribute merge algorithm is described, supporting the update performance required to run enterprise applications on read-optimised databases. Further, a memory traffic based cost model for the merge process is provided.}, language = {en} } @book{SchwarzerWeissSaoumiKitteletal.2023, author = {Schwarzer, Ingo and Weiß-Saoumi, Said and Kittel, Roland and Friedrich, Tobias and Kaynak, Koraltan and Durak, Cemil and Isbarn, Andreas and Diestel, J{\"o}rg and Knittel, Jens and Franz, Marquart and Morra, Carlos and Stahnke, Susanne and Braband, Jens and Dittmann, Johannes and Griebel, Stephan and Krampf, Andreas and Link, Martin and M{\"u}ller, Matthias and Radestock, Jens and Strub, Leo and Bleeke, Kai and Jehl, Leander and Kapitza, R{\"u}diger and Messadi, Ines and Schmidt, Stefan and Schwarz-R{\"u}sch, Signe and Pirl, Lukas and Schmid, Robert and Friedenberger, Dirk and Beilharz, Jossekin Jakob and Boockmeyer, Arne and Polze, Andreas and R{\"o}hrig, Ralf and Sch{\"a}be, Hendrik and Thiermann, Ricky}, title = {RailChain}, number = {152}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-550-7}, issn = {1613-5652}, doi = {10.25932/publishup-57740}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-577409}, publisher = {Universit{\"a}t Potsdam}, pages = {140}, year = {2023}, abstract = {The RailChain project designed, implemented, and experimentally evaluated a juridical recorder that is based on a distributed consensus protocol. That juridical blockchain recorder has been realized as distributed ledger on board the advanced TrainLab (ICE-TD 605 017) of Deutsche Bahn. For the project, a consortium consisting of DB Systel, Siemens, Siemens Mobility, the Hasso Plattner Institute for Digital Engineering, Technische Universit{\"a}t Braunschweig, T{\"U}V Rheinland InterTraffic, and Spherity has been formed. These partners not only concentrated competencies in railway operation, computer science, regulation, and approval, but also combined experiences from industry, research from academia, and enthusiasm from startups. Distributed ledger technologies (DLTs) define distributed databases and express a digital protocol for transactions between business partners without the need for a trusted intermediary. The implementation of a blockchain with real-time requirements for the local network of a railway system (e.g., interlocking or train) allows to log data in the distributed system verifiably in real-time. For this, railway-specific assumptions can be leveraged to make modifications to standard blockchains protocols. EULYNX and OCORA (Open CCS On-board Reference Architecture) are parts of a future European reference architecture for control command and signalling (CCS, Reference CCS Architecture - RCA). Both architectural concepts outline heterogeneous IT systems with components from multiple manufacturers. Such systems introduce novel challenges for the approved and safety-relevant CCS of railways which were considered neither for road-side nor for on-board systems so far. Logging implementations, such as the common juridical recorder on vehicles, can no longer be realized as a central component of a single manufacturer. All centralized approaches are in question. The research project RailChain is funded by the mFUND program and gives practical evidence that distributed consensus protocols are a proper means to immutably (for legal purposes) store state information of many system components from multiple manufacturers. The results of RailChain have been published, prototypically implemented, and experimentally evaluated in large-scale field tests on the advanced TrainLab. At the same time, the project showed how RailChain can be integrated into the road-side and on-board architecture given by OCORA and EULYNX. Logged data can now be analysed sooner and also their trustworthiness is being increased. This enables, e.g., auditable predictive maintenance, because it is ensured that data is authentic and unmodified at any point in time.}, language = {en} } @book{SeitzLinckeReinetal.2021, author = {Seitz, Klara and Lincke, Jens and Rein, Patrick and Hirschfeld, Robert}, title = {Language and tool support for 3D crochet patterns}, number = {137}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-505-7}, issn = {1613-5652}, doi = {10.25932/publishup-49253}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-492530}, publisher = {Universit{\"a}t Potsdam}, pages = {vii, 94}, year = {2021}, abstract = {Crochet is a popular handcraft all over the world. While other techniques such as knitting or weaving have received technical support over the years through machines, crochet is still a purely manual craft. Not just the act of crochet itself is manual but also the process of creating instructions for new crochet patterns, which is barely supported by domain specific digital solutions. This leads to unstructured and often also ambiguous and erroneous pattern instructions. In this report, we propose a concept to digitally represent crochet patterns. This format incorporates crochet techniques which allows domain specific support for crochet pattern designers during the pattern creation and instruction writing process. As contributions, we present a thorough domain analysis, the concept of a graph structure used as domain specific language to specify crochet patterns and a prototype of a projectional editor using the graph as representation format of patterns and a diagramming system to visualize them in 2D and 3D. By analyzing the domain, we learned about crochet techniques and pain points of designers in their pattern creation workflow. These insights are the basis on which we defined the pattern representation. In order to evaluate our concept, we built a prototype by which the feasibility of the concept is shown and we tested the software with professional crochet designers who approved of the concept.}, language = {en} } @book{SmirnovReijersNugterenetal.2010, author = {Smirnov, Sergey and Reijers, Hajo A. and Nugteren, Thijs and Weske, Mathias}, title = {Business process model abstraction : theory and practice}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-054-0}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41782}, publisher = {Universit{\"a}t Potsdam}, pages = {17}, year = {2010}, abstract = {Business process management aims at capturing, understanding, and improving work in organizations. The central artifacts are process models, which serve different purposes. Detailed process models are used to analyze concrete working procedures, while high-level models show, for instance, handovers between departments. To provide different views on process models, business process model abstraction has emerged. While several approaches have been proposed, a number of abstraction use case that are both relevant for industry and scientifically challenging are yet to be addressed. In this paper we systematically develop, classify, and consolidate different use cases for business process model abstraction. The reported work is based on a study with BPM users in the health insurance sector and validated with a BPM consultancy company and a large BPM vendor. The identified fifteen abstraction use cases reflect the industry demand. The related work on business process model abstraction is evaluated against the use cases, which leads to a research agenda.}, language = {en} } @book{SmirnovWeidlichMendlingetal.2009, author = {Smirnov, Sergey and Weidlich, Matthias and Mendling, Jan and Weske, Mathias}, title = {Action patterns in business process models}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-009-0}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33586}, publisher = {Universit{\"a}t Potsdam}, pages = {19}, year = {2009}, abstract = {Business process management experiences a large uptake by the industry, and process models play an important role in the analysis and improvement of processes. While an increasing number of staff becomes involved in actual modeling practice, it is crucial to assure model quality and homogeneity along with providing suitable aids for creating models. In this paper we consider the problem of offering recommendations to the user during the act of modeling. Our key contribution is a concept for defining and identifying so-called action patterns - chunks of actions often appearing together in business processes. In particular, we specify action patterns and demonstrate how they can be identified from existing process model repositories using association rule mining techniques. Action patterns can then be used to suggest additional actions for a process model. Our approach is challenged by applying it to the collection of process models from the SAP Reference Model.}, language = {en} } @book{SmirnovZamaniFarahaniWeske2011, author = {Smirnov, Sergey and Zamani Farahani, Armin and Weske, Mathias}, title = {State propagation in abstracted business processes}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-130-1}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51480}, publisher = {Universit{\"a}t Potsdam}, pages = {16}, year = {2011}, abstract = {Business process models are abstractions of concrete operational procedures that occur in the daily business of organizations. To cope with the complexity of these models, business process model abstraction has been introduced recently. Its goal is to derive from a detailed process model several abstract models that provide a high-level understanding of the process. While techniques for constructing abstract models are reported in the literature, little is known about the relationships between process instances and abstract models. In this paper we show how the state of an abstract activity can be calculated from the states of related, detailed process activities as they happen. The approach uses activity state propagation. With state uniqueness and state transition correctness we introduce formal properties that improve the understanding of state propagation. Algorithms to check these properties are devised. Finally, we use behavioral profiles to identify and classify behavioral inconsistencies in abstract process models that might occur, once activity state propagation is used.}, language = {en} } @book{Stechert2009, author = {Stechert, Peer}, title = {Fachdidaktische Diskussion von Informatiksystemen und der Kompetenzentwicklung im Informatikunterricht}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-024-3}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-37959}, publisher = {Universit{\"a}t Potsdam}, pages = {xiv, 359}, year = {2009}, abstract = {In der vorliegenden Arbeit wird ein Unterrichtsmodell zur Kompetenzentwicklung mit Informatiksystemen f{\"u}r die Sekundarstufe II vorgestellt. Der Bedarf wird u. a. damit begr{\"u}ndet, dass Informatiksysteme zu Beginn des 21. Jahrhunderts allgegenw{\"a}rtig sind (Kapitel 1). F{\"u}r Kompetenzentwicklung mit Informatiksystemen sind diese in ihrer Einheit aus Hardware, Software und Vernetzung anhand ihres nach außen sichtbaren Verhaltens, der inneren Struktur und Implementierungsaspekten zu analysieren. Ausgehend vom Kompetenzbegriff (Kapitel 2) und dem Informatiksystembegriff (Kapitel 3) erfolgt eine Analyse des fachdidaktischen Forschungsstandes zur Kompetenzentwicklung mit Informatiksystemen. Die Ergebnisse lassen sich in die Bereiche (1) Bildungsziele, (2) Unterrichtsinhalte, (3) Lehr-Lernmethodik und (4) Lehr-Lernmedien aufteilen (Kapitel 4). In Kapitel 5 wird die Unterrichtsmodellentwicklung beschrieben. Den Zugang zu Informatiksystemen bildet in der vorliegenden Dissertationsschrift das nach außen sichtbare Verhalten. Es erfolgt eine Fokussierung auf vernetzte fundamentale Ideen der Informatik und Strukturmodelle von Informatiksystemen als Unterrichtsinhalte. Es wird begr{\"u}ndet, dass ausgew{\"a}hlte objektorientierte Entwurfsmuster vernetzte fundamentale Ideen repr{\"a}sentieren. In Abschnitt 5.4 werden dementsprechend Entwurfsmuster als Wissensrepr{\"a}sentation f{\"u}r vernetzte fundamentale Ideen klassifiziert. Das systematische Erkunden des Verhaltens von Informatiksystemen wird im Informatikunterricht bisher kaum thematisiert. Es werden Sch{\"u}lert{\"a}tigkeiten in Anlehnung an Unterrichtsexperimente angegeben, die Sch{\"u}ler unterst{\"u}tzen, Informatiksysteme bewusst und gezielt anzuwenden (Abschnitt 5.5). Bei dieser Lehr-Lernmethodik werden das nach außen sichtbare Verhalten von Informatiksystemen, im Sinne einer Black-Box, und das Wechselspiel von Verhalten und Struktur bei vorliegender Implementierung des Systems als White-Box analysiert. Die Adressierung schrittweise h{\"o}herer kognitiver Niveaustufen wird in die Entwicklung einbezogen. Unterst{\"u}tzend wird f{\"u}r das Unterrichtsmodell lernf{\"o}rderliche Software gestaltet, die vernetzte fundamentale Ideen in Entwurfsmustern und das Experimentieren aufgreift (Abschnitt 5.6). Schwerpunkte bilden im Unterrichtsmodell zwei Arten von lernf{\"o}rderlicher Software: (1) Die Lernsoftware Pattern Park wurde von einer studentischen Projektgruppe entwickelt. In ihr k{\"o}nnen in Entwurfsmustern enthaltene fundamentale Ideen der Informatik {\"u}ber ihren Lebensweltbezug im Szenario eines Freizeitparks analysiert werden. (2) Als weitere Art Lernsoftware werden kleine Programme eingesetzt, deren innere Struktur durch ausgew{\"a}hlte Entwurfsmuster gebildet und deren Verhalten direkt durch die darin enthaltenen fundamentalen Ideen bestimmt wird. Diese Programme k{\"o}nnen durch die Experimente im Unterricht systematisch untersucht werden. Mit dem Ziel, die normative Perspektive um R{\"u}ckkopplung mit der Praxis zu erg{\"a}nzen, werden zwei Erprobungen im Informatikunterricht vorgenommen. Diese liefern Erkenntnisse zur Machbarkeit des Unterrichtsmodells und dessen Akzeptanz durch die Sch{\"u}ler (Kapitel 6 und 8). Exemplarisch umgesetzt werden die Themen Zugriffskontrolle mit dem Proxymuster, Iteration mit dem Iteratormuster und Systemzust{\"a}nde mit dem Zustandsmuster. Der intensive Austausch mit Informatiklehrpersonen in der Kooperationsschule {\"u}ber Informatiksysteme und Kompetenzentwicklung sowie die Durchf{\"u}hrung von zwei Lehrerfortbildungen erg{\"a}nzen die Beobachtungen im unterrichtlichen Geschehen. Die erste Unterrichtserprobung resultiert in einer Weiterentwicklung des Unterrichtsmodells zu Informatiksystemen und Kompetenzentwicklung (Kapitel 7). Darin erfolgt eine Fokussierung auf das nach außen sichtbare Verhalten von Informatiksystemen und eine Verfeinerung der Perspektiven auf innere Struktur und ausgew{\"a}hlte Implementierungsaspekte. Anschließend wird die zweite Unterrichtserprobung durchgef{\"u}hrt und evaluiert (Kapitel 8). Am Schluss der Forschungsarbeit steht ein in empirischen Phasen erprobtes Unterrichtsmodell.}, subject = {Informatik}, language = {de} }