@book{SchneiderLambersOrejas2019, author = {Schneider, Sven and Lambers, Leen and Orejas, Fernando}, title = {A logic-based incremental approach to graph repair}, number = {126}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-462-3}, issn = {1613-5652}, doi = {10.25932/publishup-42751}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427517}, publisher = {Universit{\"a}t Potsdam}, pages = {34}, year = {2019}, abstract = {Graph repair, restoring consistency of a graph, plays a prominent role in several areas of computer science and beyond: For example, in model-driven engineering, the abstract syntax of models is usually encoded using graphs. Flexible edit operations temporarily create inconsistent graphs not representing a valid model, thus requiring graph repair. Similarly, in graph databases—managing the storage and manipulation of graph data—updates may cause that a given database does not satisfy some integrity constraints, requiring also graph repair. We present a logic-based incremental approach to graph repair, generating a sound and complete (upon termination) overview of least-changing repairs. In our context, we formalize consistency by so-called graph conditions being equivalent to first-order logic on graphs. We present two kind of repair algorithms: State-based repair restores consistency independent of the graph update history, whereas deltabased (or incremental) repair takes this history explicitly into account. Technically, our algorithms rely on an existing model generation algorithm for graph conditions implemented in AutoGraph. Moreover, the delta-based approach uses the new concept of satisfaction (ST) trees for encoding if and how a graph satisfies a graph condition. We then demonstrate how to manipulate these STs incrementally with respect to a graph update.}, language = {en} } @article{Arnold2007, author = {Arnold, Holger}, title = {A linearized DPLL calculus with learning}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-15421}, year = {2007}, abstract = {This paper describes the proof calculus LD for clausal propositional logic, which is a linearized form of the well-known DPLL calculus extended by clause learning. It is motivated by the demand to model how current SAT solvers built on clause learning are working, while abstracting from decision heuristics and implementation details. The calculus is proved sound and terminating. Further, it is shown that both the original DPLL calculus and the conflict-directed backtracking calculus with clause learning, as it is implemented in many current SAT solvers, are complete and proof-confluent instances of the LD calculus.}, language = {en} } @unpublished{Arnold2009, author = {Arnold, Holger}, title = {A linearized DPLL calculus with clause learning (2nd, revised version)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29080}, year = {2009}, abstract = {Many formal descriptions of DPLL-based SAT algorithms either do not include all essential proof techniques applied by modern SAT solvers or are bound to particular heuristics or data structures. This makes it difficult to analyze proof-theoretic properties or the search complexity of these algorithms. In this paper we try to improve this situation by developing a nondeterministic proof calculus that models the functioning of SAT algorithms based on the DPLL calculus with clause learning. This calculus is independent of implementation details yet precise enough to enable a formal analysis of realistic DPLL-based SAT algorithms.}, language = {en} } @misc{Wallenta2014, author = {Wallenta, Daniel}, title = {A Lefschetz fixed point formula for elliptic quasicomplexes}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe}, number = {885}, issn = {1866-8372}, doi = {10.25932/publishup-43547}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-435471}, pages = {577 -- 587}, year = {2014}, abstract = {In a recent paper, the Lefschetz number for endomorphisms (modulo trace class operators) of sequences of trace class curvature was introduced. We show that this is a well defined, canonical extension of the classical Lefschetz number and establish the homotopy invariance of this number. Moreover, we apply the results to show that the Lefschetz fixed point formula holds for geometric quasiendomorphisms of elliptic quasicomplexes.}, language = {en} } @phdthesis{Awad2010, author = {Awad, Ahmed Mahmoud Hany Aly}, title = {A compliance management framework for business process models}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-49222}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {Companies develop process models to explicitly describe their business operations. In the same time, business operations, business processes, must adhere to various types of compliance requirements. Regulations, e.g., Sarbanes Oxley Act of 2002, internal policies, best practices are just a few sources of compliance requirements. In some cases, non-adherence to compliance requirements makes the organization subject to legal punishment. In other cases, non-adherence to compliance leads to loss of competitive advantage and thus loss of market share. Unlike the classical domain-independent behavioral correctness of business processes, compliance requirements are domain-specific. Moreover, compliance requirements change over time. New requirements might appear due to change in laws and adoption of new policies. Compliance requirements are offered or enforced by different entities that have different objectives behind these requirements. Finally, compliance requirements might affect different aspects of business processes, e.g., control flow and data flow. As a result, it is infeasible to hard-code compliance checks in tools. Rather, a repeatable process of modeling compliance rules and checking them against business processes automatically is needed. This thesis provides a formal approach to support process design-time compliance checking. Using visual patterns, it is possible to model compliance requirements concerning control flow, data flow and conditional flow rules. Each pattern is mapped into a temporal logic formula. The thesis addresses the problem of consistency checking among various compliance requirements, as they might stem from divergent sources. Also, the thesis contributes to automatically check compliance requirements against process models using model checking. We show that extra domain knowledge, other than expressed in compliance rules, is needed to reach correct decisions. In case of violations, we are able to provide a useful feedback to the user. The feedback is in the form of parts of the process model whose execution causes the violation. In some cases, our approach is capable of providing automated remedy of the violation.}, language = {en} } @article{DagieneJevsikovaSchuleetal.2013, author = {Dagiene, Valentina and Jevsikova, Tatjana and Schule, Carsten and Sentance, Sue and Thota, Neena}, title = {A comparison of current trends within computer science teaching in school in Germany and the UK}, series = {Commentarii informaticae didacticae : (CID)}, journal = {Commentarii informaticae didacticae : (CID)}, number = {6}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64504}, pages = {63 -- 75}, year = {2013}, abstract = {In the last two years, CS as a school subject has gained a lot of attention worldwide, although different countries have differing approaches to and experiences of introducing CS in schools. This paper reports on a study comparing current trends in CS at school, with a major focus on two countries, Germany and UK. A survey was carried out of a number of teaching professionals and experts from the UK and Germany with regard to the content and delivery of CS in school. An analysis of the quantitative data reveals a difference in foci in the two countries; putting this into the context of curricular developments we are able to offer interpretations of these trends and suggest ways in which curricula in CS at school should be moving forward.}, language = {en} } @phdthesis{Holz2013, author = {Holz, Christian}, title = {3D from 2D touch}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-67796}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {While interaction with computers used to be dominated by mice and keyboards, new types of sensors now allow users to interact through touch, speech, or using their whole body in 3D space. These new interaction modalities are often referred to as "natural user interfaces" or "NUIs." While 2D NUIs have experienced major success on billions of mobile touch devices sold, 3D NUI systems have so far been unable to deliver a mobile form factor, mainly due to their use of cameras. The fact that cameras require a certain distance from the capture volume has prevented 3D NUI systems from reaching the flat form factor mobile users expect. In this dissertation, we address this issue by sensing 3D input using flat 2D sensors. The systems we present observe the input from 3D objects as 2D imprints upon physical contact. By sampling these imprints at very high resolutions, we obtain the objects' textures. In some cases, a texture uniquely identifies a biometric feature, such as the user's fingerprint. In other cases, an imprint stems from the user's clothing, such as when walking on multitouch floors. By analyzing from which part of the 3D object the 2D imprint results, we reconstruct the object's pose in 3D space. While our main contribution is a general approach to sensing 3D input on 2D sensors upon physical contact, we also demonstrate three applications of our approach. (1) We present high-accuracy touch devices that allow users to reliably touch targets that are a third of the size of those on current touch devices. We show that different users and 3D finger poses systematically affect touch sensing, which current devices perceive as random input noise. We introduce a model for touch that compensates for this systematic effect by deriving the 3D finger pose and the user's identity from each touch imprint. We then investigate this systematic effect in detail and explore how users conceptually touch targets. Our findings indicate that users aim by aligning visual features of their fingers with the target. We present a visual model for touch input that eliminates virtually all systematic effects on touch accuracy. (2) From each touch, we identify users biometrically by analyzing their fingerprints. Our prototype Fiberio integrates fingerprint scanning and a display into the same flat surface, solving a long-standing problem in human-computer interaction: secure authentication on touchscreens. Sensing 3D input and authenticating users upon touch allows Fiberio to implement a variety of applications that traditionally require the bulky setups of current 3D NUI systems. (3) To demonstrate the versatility of 3D reconstruction on larger touch surfaces, we present a high-resolution pressure-sensitive floor that resolves the texture of objects upon touch. Using the same principles as before, our system GravitySpace analyzes all imprints and identifies users based on their shoe soles, detects furniture, and enables accurate touch input using feet. By classifying all imprints, GravitySpace detects the users' body parts that are in contact with the floor and then reconstructs their 3D body poses using inverse kinematics. GravitySpace thus enables a range of applications for future 3D NUI systems based on a flat sensor, such as smart rooms in future homes. We conclude this dissertation by projecting into the future of mobile devices. Focusing on the mobility aspect of our work, we explore how NUI devices may one day augment users directly in the form of implanted devices.}, language = {en} } @article{SentanceHodges2013, author = {Sentance, Sue and Hodges, Steve}, title = {.NET Gadgeteer Workshop}, series = {Commentarii informaticae didacticae : (CID)}, journal = {Commentarii informaticae didacticae : (CID)}, number = {6}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64654}, pages = {159}, year = {2013}, language = {en} }