@article{FeddersMuenznerWeberetal.2021,
  author    = {Fedders, Ronja and Muenzner, Matthias and Weber, Pamela and Sommerfeld, Manuela and Knauer, Miriam and Kedziora, Sarah and Kast, Naomi and Heidenreich, Steffi and Raila, Jens and Weger, Stefan and Henze, Andrea and Schupp, Michael},
  title     = {Liver-secreted RBP4 does not impair glucose homeostasis in mice},
  series = {The journal of biological chemistry},
  volume    = {293},
  journal   = {The journal of biological chemistry},
  number    = {39},
  publisher = {American Society for Biochemistry and Molecular Biology},
  address   = {Bethesda},
  issn      = {1083-351X},
  doi       = {10.1074/jbc.RA118.004294},
  pages     = {15269 -- 15276},
  year      = {2021},
  abstract  = {Retinol-binding protein 4 (RBP4) is the major transport protein for retinol in blood. Recent evidence from genetic mouse models shows that circulating RBP4 derives exclusively from hepatocytes. Because RBP4 is elevated in obesity and associates with the development of glucose intolerance and insulin resistance, we tested whether a liver-specific overexpression of RBP4 in mice impairs glucose homeostasis. We used adeno-associated viruses (AAV) that contain a highly liver-specific promoter to drive expression of murine RBP4 in livers of adult mice. The resulting increase in serum RBP4 levels in these mice was comparable with elevated levels that were reported in obesity. Surprisingly, we found that increasing circulating RBP4 had no effect on glucose homeostasis. Also during a high-fat diet challenge, elevated levels of RBP4 in the circulation failed to aggravate the worsening of systemic parameters of glucose and energy homeostasis. These findings show that liver-secreted RBP4 does not impair glucose homeostasis. We conclude that a modest increase of its circulating levels in mice, as observed in the obese, insulin-resistant state, is unlikely to be a causative factor for impaired glucose homeostasis.},
  language  = {en}
}
@article{WeberScholzSchroederRitzrauetal.2018,
  author    = {Weber, Michael and Scholz, Denis and Schr{\"o}der-Ritzrau, Andrea and Deininger, Michael and Sp{\"o}tl, Christoph and Lugli, Federico and Mertz-Kraus, Regina and Jochum, Klaus Peter and Fohlmeister, Jens Bernd and Stumpf, Cintia F. and Riechelmann, Dana F. C.},
  title     = {Evidence of warm and humid interstadials in central Europe during early MISSUE 3 revealed by a multi-proxy speleothem record},
  series = {Quaternary science reviews : the international multidisciplinary research and review journal},
  volume    = {200},
  journal   = {Quaternary science reviews : the international multidisciplinary research and review journal},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0277-3791},
  doi       = {10.1016/j.quascirev.2018.09.045},
  pages     = {276 -- 286},
  year      = {2018},
  abstract  = {Marine Isotope Stage 3 (MIS 3, 57-27 ka) was characterised by numerous rapid climate oscillations (i.e., Dansgaard-Oeschger (D/O-) events), which are reflected in various climate archives. So far, MIS 3 speleothem records from central Europe have mainly been restricted to caves located beneath temperate Alpine glaciers or close to the Atlantic Ocean. Thus, MIS 3 seemed to be too cold and dry to enable speleothem growth north of the Alps in central Europe. Here we present a new speleothem record from Bunker Cave, Germany, which shows two distinct growth phases from 52.0 (+0.8, -0.5) to 50.9 (+0.6, -1.3) ka and 473 (+1.0, -0.6) to 42.8 (+/- 0.9) ka, rejecting this hypothesis. These two growth phases potentially correspond to the two warmest and most humid phases in central Europe during MIS 3, which is confirmed by pollen data from the nearby Eifel. The hiatus separating the two phases is associated with Heinrich stadial 5 (HS 5), although the growth stop precedes the onset of HS 5. The first growth phase is characterised by a fast growth rate, and Mg concentrations and Sr isotope data suggest high infiltration and the presence of soil cover above the cave. The second growth phase was characterised by drier, but still favourable conditions for speleothem growth. During this phase, the delta C-13 values show a significant decrease associated with D/O-event 12. The timing of this shift is in agreement with other MIS 3 speleothem data from Europe and Greenland ice core data. (C) 2018 Elsevier Ltd. All rights reserved.},
  language  = {en}
}
@book{BenderDreiackEngelsetal.2022,
  author    = {Bender, Carsten and Dreiack, Stefanie and Engels, Victoria and Fisseler, Bj{\"o}rn and Gregory, Luisa and Gross, Monika and Kaffenberger, Jens and Kost{\"a}dt, Peter and Meyer zu Bexten, Erdmuthe and Rustemeier, Linda and Schwarz, Thorsten and Tannert, Benjamin and Velasquez, Estefania Cepeda and Weber, Gerhard},
  title     = {Leitfaden zur Digitalen Barrierefreiheit im Hochschulkontext},
  series = {Arbeitspapier / Hochschulforum Digitalisierung (HFD) ; 66},
  volume    = {5},
  journal   = {Arbeitspapier / Hochschulforum Digitalisierung (HFD) ; 66},
  publisher = {Stifterverband f{\"u}r die Deutsche Wissenschaft},
  address   = {Berlin},
  issn      = {2365-7081},
  doi       = {10.5445/IR/1000153177},
  pages     = {43},
  year      = {2022},
  language  = {de}
}
@article{WessigGerngrossPapeetal.2014,
  author    = {Wessig, Pablo and Gerngroß, Maik and Pape, Simon and Bruhns, Philipp and Weber, Jens},
  title     = {Novel porous materials based on oligospiroketals (OSK)},
  series = {RSC Advances : an international journal to further the chemical sciences},
  volume    = {2014},
  journal   = {RSC Advances : an international journal to further the chemical sciences},
  number    = {4},
  issn      = {2046-2069},
  doi       = {10.1039/c4ra04437a},
  pages     = {31123 -- 31129},
  year      = {2014},
  abstract  = {New porous materials based on covalently connected monomers are presented. The key step of the synthesis is an acetalisation reaction. In previous years we used acetalisation reactions extensively to build up various molecular rods. Based on this approach, investigations towards porous polymeric materials were conducted by us. Here we wish to present the results of these studies in the synthesis of 1D polyacetals and porous 3D polyacetals. By scrambling experiments with 1D acetals we could prove that exchange reactions occur between different building blocks (evidenced by MALDI-TOF mass spectrometry). Based on these results we synthesized porous 3D polyacetals under the same mild conditions.},
  language  = {en}
}
@misc{WessigGerngrossPapeetal.2014,
  author    = {Wessig, Pablo and Gerngroß, Maik and Pape, Simon and Bruhns, Philipp and Weber, Jens},
  title     = {Novel porous materials based on oligospiroketals (OSK)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-74466},
  pages     = {31123 -- 31129},
  year      = {2014},
  abstract  = {New porous materials based on covalently connected monomers are presented. The key step of the synthesis is an acetalisation reaction. In previous years we used acetalisation reactions extensively to build up various molecular rods. Based on this approach, investigations towards porous polymeric materials were conducted by us. Here we wish to present the results of these studies in the synthesis of 1D polyacetals and porous 3D polyacetals. By scrambling experiments with 1D acetals we could prove that exchange reactions occur between different building blocks (evidenced by MALDI-TOF mass spectrometry). Based on these results we synthesized porous 3D polyacetals under the same mild conditions.},
  language  = {en}
}
@article{VillatoroZuehlkeRiebeetal.2016,
  author    = {Villatoro, Jos{\´e} Andr{\´e}s and Z{\"u}hlke, Martin and Riebe, Daniel and Beitz, Toralf and Weber, Marcus and Riedel, Jens and L{\"o}hmannsr{\"o}ben, Hans-Gerd},
  title     = {IR-MALDI ion mobility spectrometry: physical source characterization and application as HPLC detector},
  series = {International journal for ion mobility spectrometry : official publication of the International Society for Ion Mobility Spectrometry},
  volume    = {19},
  journal   = {International journal for ion mobility spectrometry : official publication of the International Society for Ion Mobility Spectrometry},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1435-6163},
  doi       = {10.1007/s12127-016-0208-1},
  pages     = {197 -- 207},
  year      = {2016},
  abstract  = {Infrared matrix-assisted laser dispersion and ionization (IR-MALDI) in combination with ion mobility (IM) spectrometry enables the direct analysis of biomolecules in aqueous solution. The release of ions directly from an aqueous solution is based on a phase explosion, induced by the absorption of an IR laser pulse, which disperses the liquid as vapor, nano-and micro-droplets. The ionization process is characterized initially by a broad spatial distribution of the ions, which is a result of complex fluid dynamics and desolvation kinetics. These processes have a profound effect on the shape and width of the peaks in the IM spectra. In this work, the transport of ions by the phase explosion-induced shockwave could be studied independently from the transport by the electric field. The shockwave-induced mean velocities of the ions at different time scales were determined through IM spectrometry and shadowgraphy. The results show a deceleration of the ions from 118 m.s(-1) at a distance of 400 mu m from the liquid surface to 7.1 m.s(-1) at a distance of 10 mm, which is caused by a pile-up effect. Furthermore, the desolvation kinetics were investigated and a first-order desolvation constant of 325 +/- 50 s(-1) was obtained. In the second part, the IR-MALDI-IM spectrometer is used as an HPLC detector for the two-dimensional separation of a pesticide mixture.},
  language  = {en}
}
@article{PrescherBornscheinKoehlmannetal.2018,
  author    = {Prescher, Denise and Bornschein, Jens and K{\"o}hlmann, Wiebke and Weber, Gerhard},
  title     = {Touching graphical applications},
  series = {Universal Access in the Information Society},
  volume    = {17},
  journal   = {Universal Access in the Information Society},
  number    = {2},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1615-5289},
  doi       = {10.1007/s10209-017-0538-8},
  pages     = {391 -- 409},
  year      = {2018},
  abstract  = {Novel two-dimensional tactile displays enable blind users to not only get access to the textual but also to the graphical content of a graphical user interface. Due to the higher amount of information that can be presented in parallel, orientation and exploration can be more complex. In this paper we present the HyperBraille system, which consists of a pin-matrix device as well as a graphical screen reader providing the user with appropriate presentation and interaction possibilities. To allow for a detailed analysis of bimanual interaction strategies on a pin-matrix device, we conducted two user studies with a total of 12 blind people. The task was to fill in .pdf forms on the pin-matrix device by using different input methods, namely gestures, built-in hardware buttons as well as a conventional PC keyboard. The forms were presented in a semigraphic view type that not only contains Braille but also tactile widgets in a spatial arrangement. While completion time and error rate partly depended on the chosen input method, the usage of special reading strategies seemed to be independent of it. A direct comparison of the system and a conventional assistive technology (screen reader with single-line Braille device) showed that interaction on the pin-matrix device can be very efficient if the user is trained. The two-dimensional output can improve access to .pdf forms with insufficient accessibility as the mapping of input controls and the corresponding labels can be supported by a spatial presentation.},
  language  = {en}
}
@article{LambersWeber2020,
  author    = {Lambers, Leen and Weber, Jens},
  title     = {Preface to the special issue on the 11th International Conference on Graph Transformation},
  series = {Journal of Logical and Algebraic Methods in Programming},
  volume    = {112},
  journal   = {Journal of Logical and Algebraic Methods in Programming},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2352-2208},
  doi       = {10.1016/j.jlamp.2020.100525},
  pages     = {2},
  year      = {2020},
  abstract  = {This special issue contains extended versions of four selected papers from the 11th International Conference on Graph Transformation (ICGT 2018). The articles cover a tool for computing core graphs via SAT/SMT solvers (graph language definition), graph transformation through graph surfing in reaction systems (a new graph transformation formalism), the essence and initiality of conflicts in M-adhesive transformation systems, and a calculus of concurrent graph-rewriting processes (theory on conflicts and parallel independence).},
  language  = {en}
}
@article{YuKoflerHaeusleretal.2001,
  author    = {Yu, Tien-Shin and Kofler, Heike and H{\"a}usler, Rainer E. and Hille, Diana and Fl{\"u}gge, Ulf-Ingo and Zeeman, Samuel C. and Smith, Alison M. and Kossmann, Jens and Lloyd, James R. and Ritte, Gerhard and Steup, Martin and Lue, Wei-Ling and Chen, Jychian and Weber, Andreas P. M.},
  title     = {The Arabidopsis sex1 mutant is defective in the R1 protein, a general regulator of starch degradation in plants, and not in the chloroplast hexose transporter},
  issn      = {1040-4651},
  year      = {2001},
  language  = {en}
}
@phdthesis{Weber2007,
  author    = {Weber, Jens},
  title     = {Meso- und mikropor{\"o}se Hochleistungspolymere : Synthese, Analytik und Anwendungen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-15994},
  school      = {Universit{\"a}t Potsdam},
  year      = {2007},
  abstract  = {Die Arbeit beschreibt die Synthese, Charakterisierung und Anwendung von meso- und mikropor{\"o}sen Hochleistungspolymeren. Im ersten Teil wird die Synthese von mesopor{\"o}sen Polybenzimidazol (PBI) auf der Basis einer Templatierungsmethode vorgestellt. Auf der Grundlage kommerzieller Monomere und Silikatnanopartikel sowie eines neuen Vernetzers wurde ein Polymer-Silikat-Hybridmaterial aufgebaut. Das Herausl{\"o}sen des Silikats mit Ammoniumhydrogendifluorid f{\"u}hrt zu mesopor{\"o}sen Polybenzimidazolen mit spherischen Poren von 9 bis 11 nm Durchmesser. Die Abh{\"a}ngigkeit der beobachteten Porosit{\"a}t vom Massenverh{\"a}ltnis Silikat zu Polymer wurde ebenso untersucht wie die Abh{\"a}ngigkeit der Porosit{\"a}t vom Vernetzergehalt. Die Porosit{\"a}t vollvernetzter Proben zeigt eine lineare Abh{\"a}ngigkeit vom Verh{\"a}ltnis Silikat zu Polymer bis zu einem Grenzwert von 1. Wird der Grenzwert {\"u}berschritten, ist teilweiser Porenkollaps zu beobachten. Die Abh{\"a}ngigkeit der Porosit{\"a}t vom Vernetzergehalt bei festem Silikatgehalt ist nichtlinear. Oberhalb einer kritischen Vernetzerkonzentration wird eine komplette Replikation der Nanopartikel gefunden. Ist die Vernetzerkonzentration dagegen kleiner als der kritische Wert, so ist der v{\"o}llige Kollaps einiger Poren bei Stabilit{\"a}t der verbleibenden Poren zu beobachten. Ein komplett unpor{\"o}ses PBI resultiert bei Abwesenheit des Vernetzers. Die mesopor{\"o}sen PBI-Netzwerke konnten kontrolliert mit Phosphors{\"a}ure beladen werden. Die erhaltenen Addukte wurden auf ihre Protonenleitf{\"a}higkeit untersucht. Es kann gezeigt werden, dass die Nutzung der vordefinierten Morphologie im Vergleich zu einem unstrukturierten PBI in h{\"o}heren Leitf{\"a}higkeiten resultiert. Durch die vernetzte Struktur war des Weiteren gen{\"u}gend mechanische Stabilit{\"a}t gegeben, um die Addukte reversibel und bei sehr guten Leitf{\"a}higkeiten bis zu Temperaturen von 190°C bei 0\% relativer Feuchtigkeit zu untersuchen. Dies ist f{\"u}r unstrukturierte Phosphors{\"a}ure/PBI - Addukte aus linearem PBI nicht m{\"o}glich. Im zweiten Teil der Arbeit wird die Synthese intrinsisch mikropor{\"o}ser Polyamide und Polyimide vorgestellt. Das Konzept intrinsisch mikropor{\"o}ser Polymere konnte damit auf weitere Polymerklassen ausgeweitet werden. Als zentrales, strukturinduzierendes Motiv wurde 9,9'-Spirobifluoren gew{\"a}hlt. Dieses Molek{\"u}l ist leicht und vielf{\"a}ltig zu di- bzw. tetrafunktionellen Monomeren modifizierbar. Dabei wurden bestehende Synthesevorschriften modifiziert bzw. neue Vorschriften entwickelt. Ein erster Schwerpunkt innerhalb des Kapitels lag in der Synthese und Charakterisierung von l{\"o}slichen, intrinsisch mikropor{\"o}sen, aromatischen Polyamid und Polyimid. Es konnte gezeigt werden, dass das Beobachten von Mikroporosit{\"a}t stark von der molekularen Architektur und der Verarbeitung der Polymere abh{\"a}ngig ist. Die Charakterisierung der Porosit{\"a}t erfolgte unter Nutzung von Stickstoffsorption, Kleinwinkelr{\"o}ntgenstreuung und Molecular Modeling. Es konnte gezeigt werden, dass die Proben stark vom Umgebungsdruck abh{\"a}ngigen Deformationen unterliegen. Die starke Quellung der Proben w{\"a}hrend des Sorptionsvorgangs konnte durch Anwendung des "dual sorption" Modells, also dem Auftreten von Porenf{\"u}llung und dadurch induzierter Henry-Sorption, erkl{\"a}rt werden. Der zweite Schwerpunkt des Kapitels beschreibt die Synthese und Charakterisierung mikropor{\"o}ser Polyamid- und Polyimidnetzwerke. W{\"a}hrend Polyimidnetzwerke auf Spirobifluorenbasis ausgepr{\"a}gte Mikroporosit{\"a}t und spezifische Oberfl{\"a}chen von ca. 1100 m²/g aufwiesen, war die Situation f{\"u}r entsprechende Polyamidnetzwerke abweichend. Mittels Stickstoffsorption konnte keine Mikroporosit{\"a}t nachgewiesen werden, jedoch konnte mittels SAXS eine innere Grenzfl{\"a}che von ca. 300 m²/g nachgewiesen werden. Durch die in dieser Arbeit gezeigten Experimente kann die Grenze zwischen Polymeren mit hohem freien Volumen und mikropor{\"o}sen Polymeren somit etwas genauer gezogen werden. ausgepr{\"a}gte Mikroporosit{\"a}t kann nur in extrem steifen Strukturen nachgewiesen werden. Die Kombination der Konzepte "Mesoporosit{\"a}t durch Templatierung" und "Mikroporosit{\"a}t durch strukturierte Monomere" hatte ein hierarchisch strukturiertes Polybenzimidazol zum Ergebnis. Die Pr{\"a}senz einer Strukturierung im molekularen Maßstab konnte SAXS bewiesen werden. Das so strukturierte Polybenzimidazol zeichnete sich durch eine h{\"o}here Protonenleitf{\"a}higkeit im Vergleich zu einem rein mesopor{\"o}sen PBI aus. Der letzte Teil der Arbeit besch{\"a}ftigte sich mit der Entwicklung einer neuen Synthesemethode zur Herstellung von Polybenzimidazol. Es konnte gezeigt werden, dass lineares PBI in einer eutektischen Salzschmelze aus Lithium- und Kaliumchlorid synthetisiert werden kann. Die Umsetzung der spirobifluorenbasierten Monomere zu l{\"o}slichem oder vernetztem PBI ist in der Salzschmelze m{\"o}glich.},
  language  = {de}
}
@article{WessigGerngrossPapeetal.2014,
  author    = {Wessig, Pablo and Gerngross, Maik and Pape, Simon and Bruhns, Philipp and Weber, Jens},
  title     = {Novel porous materials based on oligospiroketals (OSK)},
  series = {RSC Advances},
  volume    = {4},
  journal   = {RSC Advances},
  number    = {59},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {2046-2069},
  doi       = {10.1039/c4ra04437a},
  pages     = {31123 -- 31129},
  year      = {2014},
  abstract  = {New porous materials based on covalently connected monomers are presented. The key step of the synthesis is an acetalisation reaction. In previous years we used acetalisation reactions extensively to build up various molecular rods. Based on this approach, investigations towards porous polymeric materials were conducted by us. Here we wish to present the results of these studies in the synthesis of 1D polyacetals and porous 3D polyacetals. By scrambling experiments with 1D acetals we could prove that exchange reactions occur between different building blocks (evidenced by MALDI-TOF mass spectrometry). Based on these results we synthesized porous 3D polyacetals under the same mild conditions.},
  language  = {en}
}
@article{WeberAbuAyyashAbueladasetal.2004,
  author    = {Weber, Michael H. and Abu-Ayyash, Khalil and Abueladas, Abdel-Rahman and Agnon, Amotz and Al-Amoush, H. and Babeyko, Andrey and Bartov, Yosef and Baumann, M. and Ben-Avraham, Zvi and Bock, G{\"u}nter and Bribach, Jens and El-Kelani, R. and Forster, A. and F{\"o}rster, Hans-J{\"u}rgen and Frieslander, U. and Garfunkel, Zvi and Grunewald, Steffen and Gotze, Hans-J{\"u}rgen and Haak, Volker and Haberland, Christian and Hassouneh, Mohammed and Helwig, S. and Hofstetter, Alfons and Jackel, K. H. and Kesten, Dagmar and Kind, Rainer and Maercklin, Nils and Mechie, James and Mohsen, Amjad and Neubauer, F. M. and Oberh{\"a}nsli, Roland and Qabbani, I. and Ritter, O. and Rumpker, G. and Rybakov, M. and Ryberg, Trond and Scherbaum, Frank and Schmidt, J. and Schulze, A. and Sobolev, Stephan Vladimir and Stiller, M. and Th,},
  title     = {The crustal structure of the Dead Sea Transform},
  year      = {2004},
  abstract  = {To address one of the central questions of plate tectonics-How do large transform systems work and what are their typical features?-seismic investigations across the Dead Sea Transform (DST), the boundary between the African and Arabian plates in the Middle East, were conducted for the first time. A major component of these investigations was a combined reflection/ refraction survey across the territories of Palestine, Israel and Jordan. The main results of this study are: (1) The seismic basement is offset by 3-5 km under the DST, (2) The DST cuts through the entire crust, broadening in the lower crust, (3) Strong lower crustal reflectors are imaged only on one side of the DST, (4) The seismic velocity sections show a steady increase in the depth of the crust-mantle transition (Moho) from 26 km at the Mediterranean to 39 km under the Jordan highlands, with only a small but visible, asymmetric topography of the Moho under the DST. These observations can be linked to the left-lateral movement of 105 km of the two plates in the last 17 Myr, accompanied by strong deformation within a narrow zone cutting through the entire crust. Comparing the DST and the San Andreas Fault (SAF) system, a strong asymmetry in subhorizontal lower crustal reflectors and a deep reaching deformation zone both occur around the DST and the SAF. The fact that such lower crustal reflectors and deep deformation zones are observed in such different transform systems suggests that these structures are possibly fundamental features of large transform plate boundaries},
  language  = {en}
}
@article{WeberAbuAyyashAbueladasetal.2009,
  author    = {Weber, Michael H. and Abu-Ayyash, Khalil and Abueladas, Abdel-Rahman and Agnon, Amotz and Alasonati-Taš{\´a}rov{\´a}, Zuzana and Al-Zubi, Hashim and Babeyko, Andrey and Bartov, Yuval and Bauer, Klaus and Becken, Michael and Bedrosian, Paul A. and Ben-Avraham, Zvi and Bock, G{\"u}nter and Bohnhoff, Marco and Bribach, Jens and Dulski, Peter and Ebbing, Joerg and El-Kelani, Radwan J. and Foerster, Andrea and F{\"o}rster, Hans-J{\"u}rgen and Frieslander, Uri and Garfunkel, Zvi and G{\"o}tze, Hans-J{\"u}rgen and Haak, Volker and Haberland, Christian and Hassouneh, Mohammed and Helwig, Stefan L. and Hofstetter, Alfons and Hoffmann-Rothe, Arne and Jaeckel, Karl-Heinz and Janssen, Christoph and Jaser, Darweesh and Kesten, Dagmar and Khatib, Mohammed Ghiath and Kind, Rainer and Koch, Olaf and Koulakov, Ivan and Laske, Maria Gabi and Maercklin, Nils},
  title     = {Anatomy of the Dead Sea transform from lithospheric to microscopic scale},
  issn      = {8755-1209},
  doi       = {10.1029/2008rg000264},
  year      = {2009},
  abstract  = {Fault zones are the locations where motion of tectonic plates, often associated with earthquakes, is accommodated. Despite a rapid increase in the understanding of faults in the last decades, our knowledge of their geometry, petrophysical properties, and controlling processes remains incomplete. The central questions addressed here in our study of the Dead Sea Transform (DST) in the Middle East are as follows: (1) What are the structure and kinematics of a large fault zone? (2) What controls its structure and kinematics? (3) How does the DST compare to other plate boundary fault zones? The DST has accommodated a total of 105 km of left-lateral transform motion between the African and Arabian plates since early Miocene (similar to 20 Ma). The DST segment between the Dead Sea and the Red Sea, called the Arava/Araba Fault (AF), is studied here using a multidisciplinary and multiscale approach from the mu m to the plate tectonic scale. We observe that under the DST a narrow, subvertical zone cuts through crust and lithosphere. First, from west to east the crustal thickness increases smoothly from 26 to 39 km, and a subhorizontal lower crustal reflector is detected east of the AF. Second, several faults exist in the upper crust in a 40 km wide zone centered on the AF, but none have kilometer-size zones of decreased seismic velocities or zones of high electrical conductivities in the upper crust expected for large damage zones. Third, the AF is the main branch of the DST system, even though it has accommodated only a part (up to 60 km) of the overall 105 km of sinistral plate motion. Fourth, the AF acts as a barrier to fluids to a depth of 4 km, and the lithology changes abruptly across it. Fifth, in the top few hundred meters of the AF a locally transpressional regime is observed in a 100-300 m wide zone of deformed and displaced material, bordered by subparallel faults forming a positive flower structure. Other segments of the AF have a transtensional character with small pull-aparts along them. The damage zones of the individual faults are only 5-20 m wide at this depth range. Sixth, two areas on the AF show mesoscale to microscale faulting and veining in limestone sequences with faulting depths between 2 and 5 km. Seventh, fluids in the AF are carried downward into the fault zone. Only a minor fraction of fluids is derived from ascending hydrothermal fluids. However, we found that on the kilometer scale the AF does not act as an important fluid conduit. Most of these findings are corroborated using thermomechanical modeling where shear deformation in the upper crust is localized in one or two major faults; at larger depth, shear deformation occurs in a 20-40 km wide zone with a mechanically weak decoupling zone extending subvertically through the entire lithosphere.},
  language  = {en}
}
@article{GoebelHesemannWeberetal.2009,
  author    = {Goebel, Ronald and Hesemann, Peter and Weber, Jens and Moeller, El{\´e}onore and Friedrich, Alwin and Beuermann, Sabine and Taubert, Andreas},
  title     = {Surprisingly high, bulk liquid-like mobility of silica-confined ionic liquids},
  issn      = {1463-9076},
  doi       = {10.1039/B821833a},
  year      = {2009},
  abstract  = {Mesoporous silica monoliths were prepared by the sol - gel technique and. lled with 1-ethyl-3-methyl imidazolium [Emim]-X (X = dicyanamide [N(CN)(2)], ethyl sulfate [EtSO4], thiocyanate [SCN], and triflate [TfO]) ionic liquids (ILs) using a methanol-IL exchange technique. The structure and behavior of the ILs inside the silica monoliths were studied using X-ray scattering, nitrogen sorption, IR spectroscopy, solid-state NMR, and thermal analysis. DSC finds shifts in both the glass transition temperature and melting points (where applicable) of the ILs. Glass transition and melting occur well below room temperature. There is thus no conflict with the NMR and IR data, which show that the ILs are as mobile at room temperature as the bulk (not confined) ILs. The very narrow line widths of the NMR spectra suggest that the ILs in our materials have the highest mobility reported for confined ILs so far. As a result, our data suggest that it is possible to generate IL/silica hybrid materials (ionogels) with bulk-like properties of the IL. This could be interesting for applications in, e.g., the solar cell or membrane fields.},
  language  = {en}
}
@article{XieWhiteWeberetal.2011,
  author    = {Xie, Zai-Lai and White, Robin J. and Weber, Jens and Taubert, Andreas and Titirici, Magdalena M.},
  title     = {Hierarchical porous carbonaceous materials via ionothermal carbonization of carbohydrates},
  series = {Journal of materials chemistry},
  volume    = {21},
  journal   = {Journal of materials chemistry},
  number    = {20},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {0959-9428},
  doi       = {10.1039/c1jm00013f},
  pages     = {7434 -- 7442},
  year      = {2011},
  abstract  = {We report on the ionothermal synthesis of porous carbon materials from a variety of carbohydrate precursors (i.e. D-glucose, D-fructose, D-xylose, and starch) using 1-butyl-3-methylimidazolium tetrachloroferrate(III), [Bmim][FeCl(4)] as a reusable solvent and catalyst. The carbon materials derived from these different carbohydrates are similar in terms of particle size and chemical composition, possessing relatively high surface areas from 44 to 155 m(2) g(-1) after ionothermal processing, which can be significantly increased to > 350 m(2) g(-1) by further thermal treatment (e. g. post-carbonization at 750 degrees C). CO(2) and N(2) sorption analysis, combined with Hg intrusion porosimetry, reveals a promising hierarchical pore structuring to these carbon materials. The ionic liquid [Bmim][FeCl(4)] has a triple role: it acts as both a soft template to generate the characterized pore structuring, solvent and as a catalyst resulting in enhanced ionothermal carbon yields. Importantly from a process point of view, the ionic liquid can be successfully recovered and reused. The current work shows that ionothermal synthesis has the potential to be an effective, low cost, and green reusable synthetic route towards sustainable porous carbon materials.},
  language  = {en}
}
@book{MientusKlempinNowaketal.2023,
  author    = {Mientus, Lukas and Klempin, Christiane and Nowak, Anna and Wyss, Corinne and Aufschnaiter, Claudia von and Faix, Ann-Christin and te Poel, Kathrin and Wahbe, Nadia and Pieper, Martin and H{\"o}ller, Katharina and Kallenbach, Lea and F{\"o}rster, Magdalena and Redecker, Anke and Dick, Mirjam and Holle, J{\"o}rg and Schneider, Edina and Rehfeldt, Daniel and Brauns, Sarah and Abels, Simone and Ferencik-Lehmkuhl, Daria and Fr{\"a}nkel, Silvia and Frohn, Julia and Liebsch, Ann-Catherine and Pech, Detlef and Schreier, Pascal and Jessen, Moiken and Großmann, Uta and Skintey, Lesya and Voerkel, Paul and Vaz Ferreira, Mergenfel A. and Zimmermann, Jan-Simon and Buddeberg, Magdalena and Henke, Vanessa and Hornberg, Sabine and V{\"o}lschow, Yvette and Warrelmann, Julia-Nadine and Malek, Jennifer and Tinnefeld, Anja and Schmidt, Peggy and Bauer, Tobias and J{\"a}nisch, Christopher and Spitzer, Lisa and Franken, Nadine and Degeling, Maria and Preisfeld, Angelika and Meier, Jana and K{\"u}th, Simon and Scholl, Daniel and Vogelsang, Christoph and Watson, Christina and Weißbach, Anna and Kulgemeyer, Christoph and Oetken, Mandy and Gorski, Sebastian and Kubsch, Marcus and Sorge, Stefan and Wulff, Peter and Fellenz, Carolin D. and Schnell, Susanne and Larisch, Cathleen and Kaiser, Franz and Knott, Christina and Reimer, Stefanie and Stegm{\"u}ller, Nathalie and Boukray{\^a}a Trabelsi, Kathrin and Schißlbauer, Franziska and Lemberger, Lukas and Barth, Ulrike and Wiehl, Angelika and Rogge, Tim and B{\"o}hnke, Anja and Dietz, Dennis and Großmann, Leroy and Wienmeister, Annett and Zoppke, Till and Jiang, Lisa and Gr{\"u}nbauer, Stephanie and Ostersehlt, D{\"o}rte and Peukert, Sophia and Sch{\"a}fer, Christoph and L{\"o}big, Anna and Br{\"o}ll, Leena and Brandt, Birgit and Breuer, Meike and Dausend, Henriette and Krelle, Michael and Andersen, Gesine and Falke, Sascha and Kindermann-G{\"u}zel, Kristin and K{\"o}rner, Katrina and Lottermoser, Lisa-Marie and P{\"u}gner, Kati and Sonnenburg, Nadine and Akarsu, Selim and Rechl, Friederike and Gadinger, Laureen and Heinze, Lena and Wittmann, Eveline and Franke, Manuela and Lachmund, Anne-Marie and B{\"o}ttger, Julia and Hannover, Bettina and Behrendt, Renata and Conty, Valentina and Grundmann, Stephanie and Ghassemi, Novid and Opitz, Ben and Br{\"a}mer, Martin and Gasparjan, David and Sambanis, Michaela and K{\"o}ster, Hilde and L{\"u}cke, Martin and Nordmeier, Volkhard and Schaal, Sonja and Haberbosch, Maximilian and Meissner, Maren and Schaal, Steffen and Br{\"u}chner, Melanie and Riehle, Tamara and Leopold, Bengta Marie and Gerlach, Susanne and Rau-Patschke, Sarah and Skorsetz, Nina and Weber, Nadine and Damk{\"o}hler, Jens and Elsholz, Markus and Trefzger, Thomas and Lewek, Tobias and Borowski, Andreas},
  title     = {Reflexion in der Lehrkr{\"a}ftebildung},
  series = {Potsdamer Beitr{\"a}ge f{\"u}r Lehrkr{\"a}ftebildung und Bildungsforschung},
  journal   = {Potsdamer Beitr{\"a}ge f{\"u}r Lehrkr{\"a}ftebildung und Bildungsforschung},
  number    = {4},
  editor    = {Mientus, Lukas and Klempin, Christiane and Nowak, Anna},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-566-8},
  issn      = {2626-3556},
  doi       = {10.25932/publishup-59171},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-591717},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {452},
  year      = {2023},
  abstract  = {Reflexion ist eine Schl{\"u}sselkategorie f{\"u}r die professionelle Entwicklung von Lehrkr{\"a}ften, welche als Ausbildungsziel in den Bildungsstandards f{\"u}r die Lehrkr{\"a}ftebildung verankert ist. Eine Verstetigung universit{\"a}r gepr{\"a}gter Forschung und Modellierung in der praxisnahen Anwendung im schulischen Kontext bietet Potentiale nachhaltiger Professionalisierung. Die St{\"a}rkung reflexionsbezogener Kompetenzen durch Empirie und Anwendung scheint eine phasen{\"u}bergreifende Herausforderung der Lehrkr{\"a}ftebildung zu sein, die es zu bew{\"a}ltigen gilt. Ziele des Tagungsbandes Reflexion in der Lehrkr{\"a}ftebildung sind eine theoretische Sch{\"a}rfung des Konzeptes „Reflexive Professionalisierung" und der Austausch {\"u}ber Fragen der Einbettung wirksamer reflexionsbezogener Lerngelegenheiten in die Lehrkr{\"a}ftebildung. Forschende und Lehrende der‚ drei Phasen (Studium, Referendariat sowie Fort- und Weiterbildung) der Lehrkr{\"a}ftebildung stellen Lehrkonzepte und Forschungsprojekte zum Thema Reflexion in der Lehrkr{\"a}ftebildung vor und diskutieren diese. Gemeinsam mit Teilnehmenden aller Phasen und von verschiedenen Standorten der Lehrkr{\"a}ftebildung werden zuk{\"u}nftige Herausforderungen identifiziert und L{\"o}sungsans{\"a}tze herausgearbeitet.},
  language  = {de}
}
@article{DebatinBehrensWeberetal.2012,
  author    = {Debatin, Franziska and Behrens, Karsten and Weber, Jens and Baburin, Igor A. and Thomas, Arne and Schmidt, Johannes and Senkovska, Irena and Kaskel, Stefan and Kelling, Alexandra and Hedin, Niklas and Bacsik, Zoltan and Leoni, Stefano and Seifert, Gotthard and J{\"a}ger, Christian and G{\"u}nter, Christina and Schilde, Uwe and Friedrich, Alwin and Holdt, Hans-J{\"u}rgen},
  title     = {An isoreticular family of microporous metal-organic frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate Syntheses, structures and properties},
  series = {Chemistry - a European journal},
  volume    = {18},
  journal   = {Chemistry - a European journal},
  number    = {37},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201200889},
  pages     = {11630 -- 11640},
  year      = {2012},
  abstract  = {We report on a new series of isoreticular frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate (IFP-14, IFP=imidazolate framework Potsdam) that form one-dimensional, microporous hexagonal channels. Varying R in the 2-substitued linker (R=Me (IFP-1), Cl (IFP-2), Br (IFP-3), Et (IFP-4)) allowed the channel diameter (4.01.7 angstrom), the polarisability and functionality of the channel walls to be tuned. Frameworks IFP-2, IFP-3 and IFP-4 are isostructural to previously reported IFP-1. The structures of IFP-2 and IFP-3 were solved by X-ray crystallographic analyses. The structure of IFP-4 was determined by a combination of PXRD and structure modelling and was confirmed by IR spectroscopy and 1H MAS and 13C CP-MAS NMR spectroscopy. All IFPs showed high thermal stability (345400?degrees C); IFP-1 and IFP-4 were stable in boiling water for 7 d. A detailed porosity analysis was performed on the basis of adsorption measurements by using various gases. The potential of the materials to undergo specific interactions with CO2 was investigated by measuring the isosteric heats of adsorption. The capacity to adsorb CH4 (at 298 K), CO2 (at 298 K) and H2 (at 77 K) at high pressure were also investigated. In situ IR spectroscopy showed that CO2 is physisorbed on IFP-14 under dry conditions and that both CO2 and H2O are physisorbed on IFP-1 under moist conditions.},
  language  = {en}
}
@article{BehrensMondalNoeskeetal.2015,
  author    = {Behrens, Karsten and Mondal, Suvendu Selchar and N{\"o}ske, Robert and Baburin, Igor A. and Leoni, Stefano and G{\"u}nter, Christina and Weber, Jens and Holdt, Hans-J{\"u}rgen},
  title     = {Microwave-Assisted Synthesis of Defects Metal-Imidazolate-Amide-Imidate Frameworks and Improved CO2 Capture},
  series = {Inorganic chemistry},
  volume    = {54},
  journal   = {Inorganic chemistry},
  number    = {20},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0020-1669},
  doi       = {10.1021/acs.inorgchem.5b01952},
  pages     = {10073 -- 10080},
  year      = {2015},
  abstract  = {In this work, we report three isostructural 3D frameworks, named IFP-11 (R = Cl), IFP-12 (R = Br), and IFP-13 (R = Et) (IFP = Imidazolate Framework Potsdam) based on a cobalt(II) center and the chelating linker 2-substituted imidazolate-4-amide-5-imidate. These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under microwave (MW)-assisted conditions in DMF. Structure determination of these IFPs was investigated by IR spectroscopy and a combination of powder X-ray diffraction (PXRD) with structure modeling. The structural models were initially built up from the single-crystal X-ray structure determination of IFP-5 (a cobalt center and 2-methylimidazolate-4-amide-5-imidate linker based framework) and were optimized by using density functional theory calculations. Substitution on position 2 of the linker (R = Cl, Br, and Et) in the isostructural IFP-11, -12, and -13 allowed variation of the potential pore window in 1D hexagonal channels (3.8 to 1.7 angstrom A). The potential of the materials to undergo specific interactions with CO2 was measured by the isosteric heat adsorption. Further, we resynthesized zinc based IFPs, namely IFP-1 = Me), IFP-2 (R = Cl), IFP-3 (R = Br), and IFP-4 (R = Et), and cobalt based IFP-5 under MW-assisted conditions with higher yield. The transition from a nucleation phase to the pure crystalline material of IFP-1 in MW-assisted synthesis depends on reaction time. IFP-1, -3, and -5, which are synthesized by MW-assisted conditions, showed an enhancement of N-2 and CO2, compared to the analogous conventional electrical (CE) heating method based materials due to crystal defects.},
  language  = {en}
}
@article{TanskiBergstedtBevingtonetal.2019,
  author    = {Tanski, George and Bergstedt, Helena and Bevington, Alexandre and Bonnaventure, Philip and Bouchard, Frederic and Coch, Caroline and Dumais, Simon and Evgrafova, Alevtina and Frauenfeld, Oliver W. and Frederick, Jennifer and Fritz, Michael and Frolov, Denis and Harder, Silvie and Hartmeyer, Ingo and Heslop, Joanne and Hoegstroem, Elin and Johansson, Margareta and Kraev, Gleb and Kuznetsova, Elena and Lenz, Josefine and Lupachev, Alexey and Magnin, Florence and Martens, Jannik and Maslakov, Alexey and Morgenstern, Anne and Nieuwendam, Alexandre and Oliva, Marc and Radosavljevi, Boris and Ramage, Justine Lucille and Schneider, Andrea and Stanilovskaya, Julia and Strauss, Jens and Trochim, Erin and Vecellio, Daniel J. and Weber, Samuel and Lantuit, Hugues},
  title     = {The Permafrost Young Researchers Network (PYRN) is getting older},
  series = {Polar record},
  volume    = {55},
  journal   = {Polar record},
  number    = {4},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {0032-2474},
  doi       = {10.1017/S0032247418000645},
  pages     = {216 -- 219},
  year      = {2019},
  abstract  = {A lasting legacy of the International Polar Year (IPY) 2007-2008 was the promotion of the Permafrost Young Researchers Network (PYRN), initially an IPY outreach and education activity by the International Permafrost Association (IPA). With the momentum of IPY, PYRN developed into a thriving network that still connects young permafrost scientists, engineers, and researchers from other disciplines. This research note summarises (1) PYRN's development since 2005 and the IPY's role, (2) the first 2015 PYRN census and survey results, and (3) PYRN's future plans to improve international and interdisciplinary exchange between young researchers. The review concludes that PYRN is an established network within the polar research community that has continually developed since 2005. PYRN's successful activities were largely fostered by IPY. With >200 of the 1200 registered members active and engaged, PYRN is capitalising on the availability of social media tools and rising to meet environmental challenges while maintaining its role as a successful network honouring the legacy of IPY.},
  language  = {en}
}
@article{UnuabonahNoeskeWeberetal.2019,
  author    = {Unuabonah, Emmanuel Iyayi and N{\"o}ske, Robert and Weber, Jens and G{\"u}nter, Christina and Taubert, Andreas},
  title     = {New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water},
  series = {Beilstein journal of nanotechnology},
  volume    = {10},
  journal   = {Beilstein journal of nanotechnology},
  publisher = {Beilstein-Institut zur F{\"o}rderung der Chemischen Wissenschaften},
  address   = {Frankfurt, Main},
  issn      = {2190-4286},
  doi       = {10.3762/bjnano.10.11},
  pages     = {119 -- 131},
  year      = {2019},
  abstract  = {A new micro/mesoporous hybrid clay nanocomposite prepared from kaolinite clay, Carica papaya seeds, and ZnCl2 via calcination in an inert atmosphere is presented. Regardless of the synthesis temperature, the specific surface area of the nanocomposite material is between approximate to 150 and 300 m(2)/g. The material contains both micro- and mesopores in roughly equal amounts. X-ray diffraction, infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy suggest the formation of several new bonds in the materials upon reaction of the precursors, thus confirming the formation of a new hybrid material. Thermogravimetric analysis/differential thermal analysis and elemental analysis confirm the presence of carbonaceous matter. The new composite is stable up to 900 degrees C and is an efficient adsorbent for the removal of a water micropollutant, 4-nitrophenol, and a pathogen, E. coli, from an aqueous medium, suggesting applications in water remediation are feasible.},
  language  = {en}
}
@article{UnuabonahGuenterWeberetal.2013,
  author    = {Unuabonah, Emmanuel Iyayi and G{\"u}nter, Christina and Weber, Jens and Lubahn, Susanne and Taubert, Andreas},
  title     = {Hybrid Clay - a new highly efficient adsorbent for water treatment},
  series = {ACS sustainable chemistry \& engineering},
  volume    = {1},
  journal   = {ACS sustainable chemistry \& engineering},
  number    = {8},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {2168-0485},
  doi       = {10.1021/sc400051y},
  pages     = {966 -- 973},
  year      = {2013},
  abstract  = {New hybrid clay adsorbent based on kaolinite clay and Carica papaya seeds with improved cation exchange capacity (CEC), rate of heavy metal ion uptake, and adsorption capacity for heavy metal ions were prepared. The CEC of the new material is ca. 75 meq/100 g in spite of the unexpectedly low surface area (approximate to 19 m(2)/g). Accordingly, the average particle size of the hybrid clay adsorbent decreased from over 200 to 100 pm. The hybrid clay adsorbent is a highly efficient adsorbent for heavy metals. With an initial metal concentration of 1 mg/L, the hybrid clay adsorbent reduces the Cd2+, Ni2+, and Pb2+ concentration in aqueous solution to <= 4, <= 7 and <= 20 mu g/L, respectively, from the first minute to over 300 min using a fixed bed containing 2 g of adsorbent and a flow rate of approximate to 7 mL/min. These values are (with the exception of Pb2+) in line with the WHO permissible limits for heavy metal ions. In a cocktail solution of Cd2+, and Ni2+, the hybrid clay shows a reduced rate of uptake but an increased adsorption capacity. The CEC data suggest that the adsorption of Pb2+, Cd2+, and Ni2+ on the hybrid clay adsorbent is essentially due to ion exchange. This hybrid clay adsorbent is prepared from materials that are abundant and by a simple means that is sustainable, easily recovered from aqueous solution, nonbiodegradable (unlike numerous biosorbent), and easily regenerated and is a highly efficient alternative to activated carbon for water treatment.},
  language  = {en}
}
@misc{UnuabonahNoeskeWeberetal.2019,
  author    = {Unuabonah, Emmanuel Iyayi and N{\"o}ske, Robert and Weber, Jens and G{\"u}nter, Christina and Taubert, Andreas},
  title     = {New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water},
  series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  number    = {720},
  doi       = {10.25932/publishup-42621},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426214},
  pages     = {119 -- 131},
  year      = {2019},
  abstract  = {A new micro/mesoporous hybrid clay nanocomposite prepared from kaolinite clay, Carica papaya seeds, and ZnCl2 via calcination in an inert atmosphere is presented. Regardless of the synthesis temperature, the specific surface area of the nanocomposite material is between ≈150 and 300 m2/g. The material contains both micro- and mesopores in roughly equal amounts. X-ray diffraction, infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy suggest the formation of several new bonds in the materials upon reaction of the precursors, thus confirming the formation of a new hybrid material. Thermogravimetric analysis/differential thermal analysis and elemental analysis confirm the presence of carbonaceous matter. The new composite is stable up to 900 °C and is an efficient adsorbent for the removal of a water micropollutant, 4-nitrophenol, and a pathogen, E. coli, from an aqueous medium, suggesting applications in water remediation are feasible.},
  language  = {en}
}
@misc{BohlkenWeberRappetal.2015,
  author    = {Bohlken, Jens and Weber, Simon and Rapp, Michael A. and Kostev, Karel},
  title     = {Continuous treatment with antidementia drugs in Germany 2003-2013},
  series = {Postprints der Universit{\"a}t Potsdam : Humanwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Humanwissenschaftliche Reihe},
  number    = {522},
  issn      = {1866-8364},
  doi       = {10.25932/publishup-41471},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414718},
  pages     = {8},
  year      = {2015},
  abstract  = {Background: Continuous treatment is an important indicator of medication adherence in dementia. However, long-term studies in larger clinical settings are lacking, and little is known about moderating effects of patient and service characteristics. Methods: Data from 12,910 outpatients with dementia (mean age 79.2 years; SD = 7.6 years) treated between January 2003 and December 2013 in Germany were included. Continuous treatment was analysed using Kaplan-Meier curves and log-rank tests. In addition, multivariate Cox regression models were fitted with continuous treatment as dependent variable and the predictors antidementia agent, age, gender, medical comorbidities, physician specialty, and health insurance status. Results: After one year of follow-up, nearly 60\% of patients continued drug treatment. Donezepil (HR: 0.88; 95\% CI: 0.82-0.95) and memantine (HR: 0.85; 0.79-0.91) patients were less likely to be discontinued treatment as compared to rivastigmine users. Patients were less likely to be discontinued if they were treated by specialist physicians as compared to general practitioners (HR: 0.44; 0.41-0.48). Younger male patients and patients who had private health insurance had a lower discontinuation risk. Regarding comorbidity, patients were more likely to be continuously treated with the index substance if a diagnosis of heart failure or hypertension had been diagnosed at baseline. Conclusions: Our results imply that besides type of antidementia agent, involvement of a specialist in the complex process of prescribing antidementia drugs can provide meaningful benefits to patients, in terms of more disease-specific and continuous treatment.},
  language  = {en}
}
@article{BohlkenWeberSiebertetal.2017,
  author    = {Bohlken, Jens and Weber, Simon A. and Siebert, Anke and Forstmeier, Simon and Kohlmann, Thomas and Rapp, Michael A.},
  title     = {Reminiscence therapy for depression in dementia},
  series = {GeroPsych - The Journal of gerontopsychology and geriatric psychiatry},
  volume    = {30},
  journal   = {GeroPsych - The Journal of gerontopsychology and geriatric psychiatry},
  publisher = {Hogrefe},
  address   = {G{\"o}ttingen},
  issn      = {1662-9647},
  doi       = {10.1024/1662-9647/a000175},
  pages     = {145 -- 151},
  year      = {2017},
  abstract  = {We investigated the efficacy of reminiscence therapy (RT) on symptoms of depression in patients with mild to moderate dementia. Out of 227 patients with mild to moderate dementia from a specialized physician's office, 27 pairs (N = 54; mean age 79.04 ± 6.16 years) who had either received treatment as usual (TAU) or TAU combined with RT, were matched retrospectively according to age as well as cognitive and depressive symptom scores. After controlling for age and sex, symptoms of depression significantly decreased over time in the RT group compared to TAU (F1,52 = 4.36; p < .05). RT is a promising option for the treatment of depression in mild to moderate dementia. Larger randomized-controlled trials are needed.},
  language  = {en}
}
@unpublished{AsendorpfConnerDeFruytetal.2013,
  author    = {Asendorpf, Jens B. and Conner, Mark and De Fruyt, Filip and De Houwer, Jan and Denissen, Jaap J. A. and Fiedler, Klaus and Fiedler, Susann and Funder, David C. and Kliegl, Reinhold and Nosek, Brian A. and Perugini, Marco and Roberts, Brent W. and Schmitt, Manfred and Van Aken, Marcel A. G. and Weber, Hannelore and Wicherts, Jelte M.},
  title     = {Replication is more than hitting the lottery twice},
  series = {European journal of personality},
  volume    = {27},
  journal   = {European journal of personality},
  number    = {2},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken},
  issn      = {0890-2070},
  pages     = {138 -- 144},
  year      = {2013},
  abstract  = {The main goal of our target article was to provide concrete recommendations for improving the replicability of research findings. Most of the comments focus on this point. In addition, a few comments were concerned with the distinction between replicability and generalizability and the role of theory in replication. We address all comments within the conceptual structure of the target article and hope to convince readers that replication in psychological science amounts to much more than hitting the lottery twice.},
  language  = {en}
}
@article{AsendorpfConnerDeFruytetal.2013,
  author    = {Asendorpf, Jens B. and Conner, Mark and De Fruyt, Filip and De Houwer, Jan and Denissen, Jaap J. A. and Fiedler, Klaus and Fiedler, Susann and Funder, David C. and Kliegl, Reinhold and Nosek, Brian A. and Perugini, Marco and Roberts, Brent W. and Schmitt, Manfred and vanAken, Marcel A. G. and Weber, Hannelore and Wicherts, Jelte M.},
  title     = {Recommendations for increasing replicability in psychology},
  series = {European journal of personality},
  volume    = {27},
  journal   = {European journal of personality},
  number    = {2},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken},
  issn      = {0890-2070},
  doi       = {10.1002/per.1919},
  pages     = {108 -- 119},
  year      = {2013},
  abstract  = {Replicability of findings is at the heart of any empirical science. The aim of this article is to move the current replicability debate in psychology towards concrete recommendations for improvement. We focus on research practices but also offer guidelines for reviewers, editors, journal management, teachers, granting institutions, and university promotion committees, highlighting some of the emerging and existing practical solutions that can facilitate implementation of these recommendations. The challenges for improving replicability in psychological science are systemic. Improvement can occur only if changes are made at many levels of practice, evaluation, and reward.},
  language  = {en}
}
@article{BohlkenWeberRappetal.2015,
  author    = {Bohlken, Jens and Weber, Simon and Rapp, Michael A. and Kostev, Karel},
  title     = {Continuous treatment with antidementia drugs in Germany 2003-2013: a retrospective database analysis},
  series = {International psychogeriatrics},
  volume    = {27},
  journal   = {International psychogeriatrics},
  number    = {8},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {1041-6102},
  doi       = {10.1017/S1041610215000654},
  pages     = {1335 -- 1342},
  year      = {2015},
  abstract  = {Background: Continuous treatment is an important indicator of medication adherence in dementia. However, long-term studies in larger clinical settings are lacking, and little is known about moderating effects of patient and service characteristics. Methods: Data from 12,910 outpatients with dementia (mean age 79.2 years; SD = 7.6 years) treated between January 2003 and December 2013 in Germany were included. Continuous treatment was analysed using Kaplan-Meier curves and log-rank tests. In addition, multivariate Cox regression models were fitted with continuous treatment as dependent variable and the predictors antidementia agent, age, gender, medical comorbidities, physician specialty, and health insurance status. Results: After one year of follow-up, nearly 60\% of patients continued drug treatment. Donezepil (HR: 0.88; 95\% CI: 0.82-0.95) and memantine (HR: 0.85; 0.79-0.91) patients were less likely to be discontinued treatment as compared to rivastigmine users. Patients were less likely to be discontinued if they were treated by specialist physicians as compared to general practitioners (HR: 0.44; 0.41-0.48). Younger male patients and patients who had private health insurance had a lower discontinuation risk. Regarding comorbidity, patients were more likely to be continuously treated with the index substance if a diagnosis of heart failure or hypertension had been diagnosed at baseline. Conclusions: Our results imply that besides type of antidementia agent, involvement of a specialist in the complex process of prescribing antidementia drugs can provide meaningful benefits to patients, in terms of more disease-specific and continuous treatment.},
  language  = {en}
}