@article{PalkopoulouLipsonMallicketal.2018, author = {Palkopoulou, Eleftheria and Lipson, Mark and Mallick, Swapan and Nielsen, Svend and Rohland, Nadin and Baleka, Sina Isabelle and Karpinski, Emil and Ivancevici, Atma M. and Thu-Hien To, and Kortschak, Daniel and Raison, Joy M. and Qu, Zhipeng and Chin, Tat-Jun and Alt, Kurt W. and Claesson, Stefan and Dalen, Love and MacPhee, Ross D. E. and Meller, Harald and Rocar, Alfred L. and Ryder, Oliver A. and Heiman, David and Young, Sarah and Breen, Matthew and Williams, Christina and Aken, Bronwen L. and Ruffier, Magali and Karlsson, Elinor and Johnson, Jeremy and Di Palma, Federica and Alfoldi, Jessica and Adelsoni, David L. and Mailund, Thomas and Munch, Kasper and Lindblad-Toh, Kerstin and Hofreiter, Michael and Poinar, Hendrik and Reich, David}, title = {A comprehensive genomic history of extinct and living elephants}, series = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {115}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, number = {11}, publisher = {National Acad. of Sciences}, address = {Washington}, issn = {0027-8424}, doi = {10.1073/pnas.1720554115}, pages = {E2566 -- E2574}, year = {2018}, language = {en} } @article{RuizHassReich2012, author = {Ruiz, Salome Vargas and Hass, Roland and Reich, Oliver}, title = {Optical monitoring of milk fat phase transition within homogenized fresh milk by Photon Density Wave spectroscopy}, series = {International dairy journal}, volume = {26}, journal = {International dairy journal}, number = {2}, publisher = {Elsevier}, address = {Oxford}, issn = {0958-6946}, doi = {10.1016/j.idairyj.2012.03.012}, pages = {120 -- 126}, year = {2012}, abstract = {Photon Density Wave (PDW) spectroscopy was applied for temperature dependent monitoring of melting and crystallization of milk fat within homogenized fresh milk. As an in-line process analytical technique, PDW spectroscopy quantifies continuously the optical properties of turbid material, providing an insight into its structural processes. Here, the measured absorption coefficients reflect temperature as well as fat content of milk and the reduced scattering coefficients probe physical changes of the light scattering fat droplets and casein micelles. Thermal processing reveals breakpoints within the temperature trend of the reduced scattering coefficient of fat containing milk. Found at 16 degrees C and 24 degrees C while cooling and heating, respectively, they are associated to the phase transitions of milk fat. Continuous isothermal measurement of the optical coefficients showed that the crystallization process requires several hours. The strongly changing reduced scattering coefficient implies that the thermal history of milk will have a major impact on any method based on light scattering as quantitative analytical technique.}, language = {en} } @article{BeschererMunzkeReichetal.2013, author = {Bescherer, Klaus and Munzke, Dorit and Reich, Oliver and Loock, Hans-Peter}, title = {Fabrication and modeling of multimode fiber lenses}, series = {Applied optics}, volume = {52}, journal = {Applied optics}, number = {4}, publisher = {Optical Society of America}, address = {Washington}, issn = {1559-128X}, doi = {10.1364/AO.52.000B40}, pages = {B40 -- B45}, year = {2013}, abstract = {We report on the fabrication, modeling, and experimental verification of the emission of fiber lenses fabricated on multimode fibers in different media. Concave fiber lenses with a radius of 150 mu m were fabricated onto a multimode silica fiber (100 mu m core) by grinding and polishing against a ruby sphere template. In our theoretical model we assume that the fiber guides light from a Lambertian light source and that the emission cone is governed solely by the range of permitted emission angles. We investigate concave and convex lenses at 532 nm with different radii and in a variety of surrounding media from air (n(0) = 1.00) to sapphire (n(0) = 1.77). It was found that noticeable focusing or defocusing effects of a silica fiber lens in ethanol (n(0) = 1.36) and dimethyl sulfoxide (DMSO) (n(0) = 1.48) are only observed when the fiber lens radius was less than the fiber diameter.}, language = {en} } @article{SchuettRothkegelTrukenbrodetal.2017, author = {Sch{\"u}tt, Heiko Herbert and Rothkegel, Lars Oliver Martin and Trukenbrod, Hans Arne and Reich, Sebastian and Wichmann, Felix A. and Engbert, Ralf}, title = {Likelihood-based parameter estimation and comparison of dynamical cognitive models}, series = {Psychological Review}, volume = {124}, journal = {Psychological Review}, number = {4}, publisher = {American Psychological Association}, address = {Washington}, issn = {0033-295X}, doi = {10.1037/rev0000068}, pages = {505 -- 524}, year = {2017}, abstract = {Dynamical models of cognition play an increasingly important role in driving theoretical and experimental research in psychology. Therefore, parameter estimation, model analysis and comparison of dynamical models are of essential importance. In this article, we propose a maximum likelihood approach for model analysis in a fully dynamical framework that includes time-ordered experimental data. Our methods can be applied to dynamical models for the prediction of discrete behavior (e.g., movement onsets); in particular, we use a dynamical model of saccade generation in scene viewing as a case study for our approach. For this model, the likelihood function can be computed directly by numerical simulation, which enables more efficient parameter estimation including Bayesian inference to obtain reliable estimates and corresponding credible intervals. Using hierarchical models inference is even possible for individual observers. Furthermore, our likelihood approach can be used to compare different models. In our example, the dynamical framework is shown to outperform nondynamical statistical models. Additionally, the likelihood based evaluation differentiates model variants, which produced indistinguishable predictions on hitherto used statistics. Our results indicate that the likelihood approach is a promising framework for dynamical cognitive models.}, language = {en} } @article{AdebayoHashimHassetal.2017, author = {Adebayo, Segun Emmanuel and Hashim, Norhashila and Hass, Roland and Reich, Oliver and Regen, Christian and M{\"u}nzberg, Marvin and Abdan, Khalina and Hanafi, Marsyita and Zude, Manuela}, title = {Using absorption and reduced scattering coefficients for non-destructive analyses of fruit flesh firmness and soluble solids content in pear}, series = {Postharvest Biology and Technology}, volume = {130}, journal = {Postharvest Biology and Technology}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0925-5214}, doi = {10.1016/j.postharvbio.2017.04.004}, pages = {56 -- 63}, year = {2017}, abstract = {Quality attributes of fruit determine its acceptability by the retailer and consumer. The objective of this work was to investigate the potential of absorption (μa) and reduced scattering (μs') coefficients of European pear to analyze its fruit flesh firmness and soluble solids content (SSC). The absolute reference values, μa* (cm-1) and μs'* (cm-1), of pear were invasively measured, employing multi-spectral photon density wave (PDW) spectroscopy at preselected wavelengths of 515, 690, and 940 nm considering two batches of unripe and overripe fruit. On eight measuring dates during fruit development, μa and μs' were analyzed non-destructively by means of laser light backscattering imaging (LLBI) at similar wavelengths of 532, 660, and 830 nm by means of fitting according to Farrell's diffusion theory, using fix reference values of either μa* or μs'*. Both, the μa* and the μa as well as μs'* and μs' showed similar trends. Considering the non-destructively measured data during fruit development, μa at 660 nm decreased 91 till 141 days after full bloom (dafb) from 1.49 cm-1 to 0.74 cm-1 due to chlorophyll degradation. At 830 nm, μa only slightly decreased from 0.41 cm-1 to 0.35 cm-1. The μs' at all wavelengths revealed a decreasing trend as the fruit developed. The difference measured at 532 nm was most pronounced decreasing from 24 cm-1 to 10 cm-1, while at 660 nm and 830 nm values decreased from 15 cm-1 to 13 cm-1 and from 10 cm-1 to 8 cm-1, respectively. When building calibration models with partial least-squares regression analysis on the optical properties for non-destructive analysis of the fruit SSC, μa at 532 nm and 830 nm resulted in a correlation coefficient of R = 0.66, however, showing high measuring uncertainty. The combination of all three wavelengths gave an enhanced, encouraging R = 0.89 for firmness analysis using μs' in the freshly picked fruit.}, language = {en} } @misc{WernerMuenzbergHassetal.2016, author = {Werner, Peter and M{\"u}nzberg, Marvin and Hass, Roland and Reich, Oliver}, title = {Process analytical approaches for the coil-to-globule transition of poly(N-isopropylacrylamide) in a concentrated aqueous suspension}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {944}, issn = {1866-8372}, doi = {10.25932/publishup-43116}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-431162}, pages = {807 -- 819}, year = {2016}, abstract = {The coil-to-globule transition of poly(N-isopropylacrylamide) (PNIPAM) microgel particles suspended in water has been investigated in situ as a function of heating and cooling rate with four optical process analytical technologies (PAT), sensitive to structural changes of the polymer. Photon Density Wave (PDW) spectroscopy, Focused Beam Reflectance Measurements (FBRM), turbidity measurements, and Particle Vision Microscope (PVM) measurements are found to be powerful tools for the monitoring of the temperature-dependent transition of such thermo-responsive polymers. These in-line technologies allow for monitoring of either the reduced scattering coefficient and the absorption coefficient, the chord length distribution, the reflected intensities, or the relative backscatter index via in-process imaging, respectively. Varying heating and cooling rates result in rate-dependent lower critical solution temperatures (LCST), with different impact of cooling and heating. Particularly, the data obtained by PDW spectroscopy can be used to estimate the thermodynamic transition temperature of PNIPAM for infinitesimal heating or cooling rates. In addition, an inverse hysteresis and a reversible building of micrometer-sized agglomerates are observed for the PNIPAM transition process.}, language = {en} } @article{AndrewsFergusonRangaswamyetal.2017, author = {Andrews, N. L. P. and Ferguson, T. and Rangaswamy, A. M. M. and Bernicky, A. R. and Henning, N. and Dudelzak, A. and Reich, Oliver and Barnes, Jack A. and Loock, Hans-Peter}, title = {Hadamard-Transform Fluorescence Excitation-Emission-Matrix Spectroscopy}, series = {Analytical chemistry}, volume = {89}, journal = {Analytical chemistry}, publisher = {American Chemical Society}, address = {Washington}, issn = {0003-2700}, doi = {10.1021/acs.analchem.7b02400}, pages = {8554 -- 8564}, year = {2017}, abstract = {We present a fluorescence excitation-emission-matrix spectrometer with superior data acquisition rates over previous instruments. Light from a white light emitting diode (LED) source is dispersed onto a digital micromirror array (DMA) and encoded using binary n-size Walsh functions ("barcodes"). The encoded excitation light is used to irradiate the liquid sample and its fluorescence is dispersed and detected using a conventional array spectrometer. After exposure to excitation light encoded in n different ways, the 2-dimensional excitation-emission-matrix (EEM) spectrum is obtained by inverse Hadamard transformation. Using this technique we examined the kinetics of the fluorescence of rhodamine B as a function of temperature and the acid-driven demetalation of chlorophyll into pheophytin-a. For these experiments, EEM spectra with 31 excitation channels and 2048 emission channels were recorded every 15 s. In total, data from over 3000 EEM spectra were included in this report. It is shown that the increase in data acquisition rate can be as high as [{n(n + 1)}/2]-fold over conventional EEM spectrometers. Spectral acquisition rates of more than two spectra per second were demonstrated.}, language = {en} } @incollection{AscheBoeckmannLaueetal.2000, author = {Asche, Hartmut and B{\"o}ckmann, Christine and Laue, Steffen and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Lemke, Matthias and Schober, Lars and Reich, Oliver and L{\"u}ck, Erika and Sch{\"u}tte, Marc and Domsch, Horst and Makower, Alexander and Scheller, Frieder W. and St{\"o}cklein, Wolfgang and Wollenberger, Ursula and Schultze, Rainer and Hengstermann, Theo and Schael, Frank}, title = {Umweltforschung f{\"u}r das Land Brandenburg : Projekt Umweltanalytik / Umweltmeßtechnik / Informationssysteme}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-3862}, publisher = {Universit{\"a}t Potsdam}, pages = {176 -- 227}, year = {2000}, language = {de} } @misc{ReichLoehmannsroebenSchael2003, author = {Reich, Oliver and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Schael, Frank}, title = {Optical sensing with photon density waves: investigation of model media}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13147}, year = {2003}, abstract = {Investigations with frequency domain photon density waves allow elucidation of absorption and scattering properties of turbid media. The temporal and spatial propagation of intensity modulated light with frequencies up to more than 1 GHz can be described by the P1 approximation to the Boltzmann transport equation. In this study, we establish requirements for the appropriate choice of turbid model media and characterize mixtures of isosulfan blue as absorber and polystyrene beads as scatterer. For these model media, the independent determination of absorption and reduced scattering coefficients over large absorber and scatterer concentration ranges is demonstrated with a frequency domain photon density wave spectrometer employing intensity and phase measurements at various modulation frequencies.}, language = {en} } @article{SandmannMuenzbergBresseletal.2022, author = {Sandmann, Michael and M{\"u}nzberg, Marvin and Bressel, Lena and Reich, Oliver and Hass, Roland}, title = {Inline monitoring of high cell density cultivation of Scenedesmus rubescens in a mesh ultra-thin layer photobioreactor by photon density wave spectroscopy}, series = {BMC Research Notes / Biomed Central}, volume = {15}, journal = {BMC Research Notes / Biomed Central}, number = {1}, publisher = {Biomed Central (London)}, address = {London}, issn = {1756-0500}, doi = {10.1186/s13104-022-05943-2}, pages = {7}, year = {2022}, abstract = {Objective Due to multiple light scattering that occurs inside and between cells, quantitative optical spectroscopy in turbid biological suspensions is still a major challenge. This includes also optical inline determination of biomass in bioprocessing. Photon Density Wave (PDW) spectroscopy, a technique based on multiple light scattering, enables the independent and absolute determination of optical key parameters of concentrated cell suspensions, which allow to determine biomass during cultivation. Results A unique reactor type, called "mesh ultra-thin layer photobioreactor" was used to create a highly concentrated algal suspension. PDW spectroscopy measurements were carried out continuously in the reactor without any need of sampling or sample preparation, over 3 weeks, and with 10-min time resolution. Conventional dry matter content and coulter counter measurements have been employed as established offline reference analysis. The PBR allowed peak cell dry weight (CDW) of 33.4 g L-1. It is shown that the reduced scattering coefficient determined by PDW spectroscopy is strongly correlated with the biomass concentration in suspension and is thus suitable for process understanding. The reactor in combination with the fiber-optical measurement approach will lead to a better process management.}, language = {en} }