@article{GrottKnollenbergHammetal.2019, author = {Grott, Matthias and Knollenberg, J. and Hamm, M. and Ogawa, K. and Jaumann, R. and Otto, Katharina Alexandra and Delbo, M. and Michel, P. and Biele, J. and Neumann, W. and Knapmeyer, M. and Kuehrt, E. and Senshu, H. and Okada, T. and Helbert, J. and Maturilli, A. and M{\"u}ller, N. and Hagermann, A. and Sakatani, N. and Tanaka, S. and Arai, T. and Mottola, S. and Tachibana, S. and Pelivan, Ivanka and Drube, L. and Vincent, J-B and Yano, H. and Pilorget, C. and Matz, K. D. and Schmitz, N. and Koncz, A. and Schr{\"o}der, S. E. and Trauthan, F. and Schlotterer, M. and Krause, C. and Ho, T-M and Moussi-Soffys, A.}, title = {Low thermal conductivity boulder with high porosity identified on C-type asteroid (162173) Ryugu}, series = {Nature astronomy}, volume = {3}, journal = {Nature astronomy}, number = {11}, publisher = {Nature Publishing Group}, address = {London}, issn = {2397-3366}, doi = {10.1038/s41550-019-0832-x}, pages = {971 -- 976}, year = {2019}, abstract = {C-type asteroids are among the most pristine objects in the Solar System, but little is known about their interior structure and surface properties. Telescopic thermal infrared observations have so far been interpreted in terms of a regolith-covered surface with low thermal conductivity and particle sizes in the centimetre range. This includes observations of C-type asteroid (162173) Ryugu1,2,3. However, on arrival of the Hayabusa2 spacecraft at Ryugu, a regolith cover of sand- to pebble-sized particles was found to be absent4,5 (R.J. et al., manuscript in preparation). Rather, the surface is largely covered by cobbles and boulders, seemingly incompatible with the remote-sensing infrared observations. Here we report on in situ thermal infrared observations of a boulder on the C-type asteroid Ryugu. We found that the boulder's thermal inertia was much lower than anticipated based on laboratory measurements of meteorites, and that a surface covered by such low-conductivity boulders would be consistent with remote-sensing observations. Our results furthermore indicate high boulder porosities as well as a low tensile strength in the few hundred kilopascal range. The predicted low tensile strength confirms the suspected observational bias6 in our meteorite collections, as such asteroidal material would be too frail to survive atmospheric entry7.}, language = {en} } @article{GrottKnollenbergHammetal.2019, author = {Grott, Matthias and Knollenberg, J. and Hamm, M. and Ogawa, K. and Jaumann, R. and Otto, Katharina Alexandra and Delbo, M. and Michel, Patrick and Biele, J. and Neumann, Wladimir and Knapmeyer, Martin and K{\"u}hrt, E. and Senshu, H. and Okada, T. and Helbert, Jorn and Maturilli, A. and M{\"u}ller, N. and Hagermann, A. and Sakatani, Naoya and Tanaka, S. and Arai, T. and Mottola, Stefano and Tachibana, Shogo and Pelivan, Ivanka and Drube, Line and Vincent, J-B and Yano, Hajime and Pilorget, C. and Matz, K. D. and Schmitz, N. and Koncz, A. and Schr{\"o}der, Stefan E. and Trauthan, F. and Schlotterer, Markus and Krause, C. and Ho, T-M and Moussi-Soffys, A.}, title = {Low thermal conductivity boulder with high porosity identified on C-type asteroid (162173) Ryugu}, series = {Nature astronomy}, volume = {3}, journal = {Nature astronomy}, number = {11}, publisher = {Nature Publishing Group}, address = {London}, issn = {2397-3366}, doi = {10.1038/s41550-019-0832-x}, pages = {971 -- 976}, year = {2019}, abstract = {C-type asteroids are among the most pristine objects in the Solar System, but little is known about their interior structure and surface properties. Telescopic thermal infrared observations have so far been interpreted in terms of a regolith-covered surface with low thermal conductivity and particle sizes in the centimetre range. This includes observations of C-type asteroid (162173) Ryugu1,2,3. However, on arrival of the Hayabusa2 spacecraft at Ryugu, a regolith cover of sand- to pebble-sized particles was found to be absent4,5 (R.J. et al., manuscript in preparation). Rather, the surface is largely covered by cobbles and boulders, seemingly incompatible with the remote-sensing infrared observations. Here we report on in situ thermal infrared observations of a boulder on the C-type asteroid Ryugu. We found that the boulder's thermal inertia was much lower than anticipated based on laboratory measurements of meteorites, and that a surface covered by such low-conductivity boulders would be consistent with remote-sensing observations. Our results furthermore indicate high boulder porosities as well as a low tensile strength in the few hundred kilopascal range. The predicted low tensile strength confirms the suspected observational bias6 in our meteorite collections, as such asteroidal material would be too frail to survive atmospheric entry7}, language = {en} } @article{HobigerCornouWatheletetal.2013, author = {Hobiger, M. and Cornou, C. and Wathelet, M. and Di Giulio, G. and Knapmeyer-Endrun, B. and Renalier, F. and Bard, Pierre-Yves and Savvaidis, Alexandros and Hailemikael, S. and Le Bihan, N. and Ohrnberger, Matthias and Theodoulidis, N.}, title = {Ground structure imaging by inversions of Rayleigh wave ellipticity sensitivity analysis and application to European strong-motion sites}, series = {Geophysical journal international}, volume = {192}, journal = {Geophysical journal international}, number = {1}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggs005}, pages = {207 -- 229}, year = {2013}, abstract = {The knowledge of the local soil structure is important for the assessment of seismic hazards. A widespread, but time-consuming technique to retrieve the parameters of the local underground is the drilling of boreholes. Another way to obtain the shear wave velocity profile at a given location is the inversion of surface wave dispersion curves. To ensure a good resolution for both superficial and deeper layers, the used dispersion curves need to cover a wide frequency range. This wide frequency range can be obtained using several arrays of seismic sensors or a single array comprising a large number of sensors. Consequently, these measurements are time-consuming. A simpler alternative is provided by the use of the ellipticity of Rayleigh waves. The frequency dependence of the ellipticity is tightly linked to the shear wave velocity profile. Furthermore, it can be measured using a single seismic sensor. As soil structures obtained by scaling of a given model exhibit the same ellipticity curve, any inversion of the ellipticity curve alone will be ambiguous. Therefore, additional measurements which fix the absolute value of the shear wave velocity profile at some points have to be included in the inversion process. Small-scale spatial autocorrelation measurements or MASW measurements can provide the needed data. Using a theoretical soil structure, we show which parts of the ellipticity curve have to be included in the inversion process to get a reliable result and which parts can be omitted. Furthermore, the use of autocorrelation or high-frequency dispersion curves will be highlighted. The resulting guidelines for inversions including ellipticity data are then applied to real data measurements collected at 14 different sites during the European NERIES project. It is found that the results are in good agreement with dispersion curve measurements. Furthermore, the method can help in identifying the mode of Rayleigh waves in dispersion curve measurements.}, language = {en} }