@article{TadjoungWaffoYesildagCasertaetal.2018,
  author    = {Tadjoung Waffo, Armel Franklin and Yesildag, Cigdem and Caserta, Giorgio and Katz, Sagie and Zebger, Ingo and Lensen, Marga C. and Wollenberger, Ulla and Scheller, Frieder W. and Altintas, Zeynep},
  title     = {Fully electrochemical MIP sensor for artemisinin},
  series = {Sensors and actuators : B, Chemical},
  volume    = {275},
  journal   = {Sensors and actuators : B, Chemical},
  publisher = {Elsevier},
  address   = {Lausanne},
  issn      = {0925-4005},
  doi       = {10.1016/j.snb.2018.08.018},
  pages     = {163 -- 173},
  year      = {2018},
  abstract  = {This study aims to develop a rapid, sensitive and cost-effective biomimetic electrochemical sensor for artemisinin determination in plant extracts and for pharmacokinetic studies. A novel molecularly imprinted polymer (MIP)based electrochemical sensor was developed by electropolymerization of o-phenylenediamine (o-PD) in the presence of artemisinin on gold wire surface for sensitive detection of artemisinin. The experimental parameters, including selection of functional monomer, polymerization conditions, template extraction after polymerization, influence of pH and buffer were all optimized. Every step of imprinted film synthesis were evaluated by employing voltammetry techniques, surface-enhanced infrared absorption spectroscopy (SEIRAS) and atomic force microscopy (AFM). The specificity was further evaluated by investigating non-specific artemisinin binding on non-imprinted polymer (NIP) surfaces and an imprinting factor of 6.8 was achieved. The artemisinin imprinted polymers using o-PD as functional monomer have provided highly stable and effective binding cavities for artemisinin. Cross-reactivity studies with drug molecules showed that the MIPs are highly specific for artemisinin. The influence of matrix effect was further investigated both in artificial plant matrix and diluted human serum. The results revealed a high affinity of artemisinin-MIP with dissociation constant of 7.3 x 10(-9) M and with a detection limit of 0.01 mu M and 0.02 mu M in buffer and plant matrix, respectively.},
  language  = {en}
}
@article{LendleinBalkTarazonaetal.2019,
  author    = {Lendlein, Andreas and Balk, Maria and Tarazona, Natalia A. and Gould, Oliver E. C.},
  title     = {Bioperspectives for Shape-Memory Polymers as Shape Programmable, Active Materials},
  series = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  volume    = {20},
  journal   = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  number    = {10},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1525-7797},
  doi       = {10.1021/acs.biomac.9b01074},
  pages     = {3627 -- 3640},
  year      = {2019},
  abstract  = {Within the natural world, organisms use information stored in their material structure to generate a physical response to a wide variety of environmental changes. The ability to program synthetic materials to intrinsically respond to environmental changes in a similar manner has the potential to revolutionize material science. By designing polymeric devices capable of responsively changing shape or behavior based on information encoded into their structure, we can create functional physical behavior, including a shape memory and an actuation capability. Here we highlight the stimuli-responsiveness and shape-changing ability of biological materials and biopolymer-based materials, plus their potential biomedical application, providing a bioperspective on shape-memory materials. We address strategies to incorporate a shape memory (actuation) function in polymeric materials, conceptualized in terms of its relationship with inputs (environmental stimuli) and outputs (shape change). Challenges and opportunities associated with the integration of several functions in a single material body to achieve multifunctionality are discussed. Finally, we describe how elements that sense, convert, and transmit stimuli have been used to create multisensitive materials.},
  language  = {en}
}
@article{LendleinGould2019,
  author    = {Lendlein, Andreas and Gould, Oliver E. C.},
  title     = {Reprogrammable recovery and actuation behaviour of shape-memory polymers},
  series = {Nature reviews. Materials},
  volume    = {4},
  journal   = {Nature reviews. Materials},
  number    = {2},
  publisher = {Nature Publ. Group},
  address   = {London},
  issn      = {2058-8437},
  doi       = {10.1038/s41578-018-0078-8},
  pages     = {116 -- 133},
  year      = {2019},
  abstract  = {Shape memory is the capability of a material to be deformed and fixed into a temporary shape. Recovery of the original shape can then be triggered only by an external stimulus. Shape-memory polymers are highly deformable materials that can be programmed to recover a memorized shape in response to a variety of environmental and spatially localized stimuli as a one-way effect. The shape-memory function can also be generated as a reversible effect enabling actuation behaviour through macroscale deformation and processing, specifically by dictating the macromolecular orientation of actuation units and of the skeleton structure of geometry-determining units in the polymers. Shape-memory polymers can be programmed and reprogrammed into arbitrary shapes. Both recovery and actuation behaviour are reprogrammable. In this Review, we outline the common basis and key differences between the two shape-memory behaviours of polymers in terms of mechanism, fabrication schemes and characterization methods. We discuss which combination of macromolecular architecture and macroscale processing is necessary for coordinated, decentralized and responsive physical behaviour. The extraction of relevant thermomechanical information is described, and design criteria are shown for microscale and macroscale morphologies to gain high levels of recovered or actuation strains as well as on-demand 2D-to-3D shape transformations. Finally, real-world applications and key future challenges are highlighted.},
  language  = {en}
}
@article{MuellerFoerstendorfSteudtneretal.2019,
  author    = {M{\"u}ller, Katharina and Foerstendorf, Harald and Steudtner, Robin and Tsushima, Satoru and Kumke, Michael Uwe and Lef{\`e}vre, Gr{\´e}gory and Rothe, J{\"o}rg and Mason, Harris and Szab{\´o}, Zolt{\´a}n and Yang, Ping and Adam, Christian K. R. and Andr{\´e}, R{\´e}mi and Brennenstuhl, Katlen and Chiorescu, Ion and Cho, Herman M. and Creff, Ga{\"e}lle and Coppin, Fr{\´e}d{\´e}ric and Dardenne, Kathy and Den Auwer, Christophe and Drobot, Bj{\"o}rn and Eidner, Sascha and Hess, Nancy J. and Kaden, Peter and Kremleva, Alena and Kretzschmar, Jerome and Kr{\"u}ger, Sven and Platts, James A. and Panak, Petra and Polly, Robert and Powell, Brian A. and Rabung, Thomas and Redon, Roland and Reiller, Pascal E. and R{\"o}sch, Notker and Rossberg, Andr{\´e} and Scheinost, Andreas C. and Schimmelpfennig, Bernd and Schreckenbach, Georg and Skerencak-Frech, Andrej and Sladkov, Vladimir and Solari, Pier Lorenzo and Wang, Zheming and Washton, Nancy M. and Zhang, Xiaobin},
  title     = {Interdisciplinary Round-Robin Test on molecular spectroscopy of the U(VI) Acetate System},
  series = {ACS omega / American Chemical Society},
  volume    = {4},
  journal   = {ACS omega / American Chemical Society},
  number    = {5},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {2470-1343},
  doi       = {10.1021/acsomega.9b00164},
  pages     = {8167 -- 8177},
  year      = {2019},
  abstract  = {A comprehensive molecular analysis of a simple aqueous complexing system. U(VI) acetate. selected to be independently investigated by various spectroscopic (vibrational, luminescence, X-ray absorption, and nuclear magnetic resonance spectroscopy) and quantum chemical methods was achieved by an international round-robin test (RRT). Twenty laboratories from six different countries with a focus on actinide or geochemical research participated and contributed to this scientific endeavor. The outcomes of this RRT were considered on two levels of complexity: first, within each technical discipline, conformities as well as discrepancies of the results and their sources were evaluated. The raw data from the different experimental approaches were found to be generally consistent. In particular, for complex setups such as accelerator-based X-ray absorption spectroscopy, the agreement between the raw data was high. By contrast, luminescence spectroscopic data turned out to be strongly related to the chosen acquisition parameters. Second, the potentials and limitations of coupling various spectroscopic and theoretical approaches for the comprehensive study of actinide molecular complexes were assessed. Previous spectroscopic data from the literature were revised and the benchmark data on the U(VI) acetate system provided an unambiguous molecular interpretation based on the correlation of spectroscopic and theoretical results. The multimethodologic approach and the conclusions drawn address not only important aspects of actinide spectroscopy but particularly general aspects of modern molecular analytical chemistry.},
  language  = {en}
}
@article{daSilvaVarellaJonesetal.2019,
  author    = {da Silva, Filipe Ferreira and Varella, Marcio T. do N. and Jones, Nykola C. and Hoffmann, Soren Vronning and Denifl, Stephan and Bald, Ilko and Kopyra, Janina},
  title     = {Electron-Induced Reactions in 3-Bromopyruvic Acid},
  series = {Chemistry - a European journal},
  volume    = {25},
  journal   = {Chemistry - a European journal},
  number    = {21},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201806132},
  pages     = {5498 -- 5506},
  year      = {2019},
  abstract  = {3-Bromopyruvic acid (3BP) is a potential anticancer drug, the action of which on cellular metabolism is not yet entirely clear. The presence of a bromine atom suggests that it is also reactive towards low-energy electrons, which are produced in large quantities during tumour radiation therapy. Detailed knowledge of the interaction of 3BP with secondary electrons is a prerequisite to gain a complete picture of the effects of 3BP in different forms of cancer therapy. Herein, dissociative electron attachment (DEA) to 3BP in the gas phase has been studied both experimentally by using a crossed-beam setup and theoretically through scattering and quantum chemical calculations. These results are complemented by a vacuum ultraviolet absorption spectrum. The main fragmentation channel is the formation of Br- close to 0 eV and within several resonant features at 1.9 and 3-8 eV. At low electron energies, Br- formation proceeds through sigma* and pi* shape resonances, and at higher energies through core-excited resonances. It is found that the electron-capture cross-section is clearly increased compared with that of non-brominated pyruvic acid, but, at the same time, fragmentation reactions through DEA are significantly altered as well. The 3BP transient negative ion is subject to a lower number of fragmentation reactions than those of pyruvic acid, which indicates that 3BP could indeed act by modifying the electron-transport chains within oxidative phosphorylation. It could also act as a radio-sensitiser.},
  language  = {en}
}
@article{ZhangRudolphBenitezetal.2019,
  author    = {Zhang, Quanchao and Rudolph, Tobias and Benitez, Alejandro J. and Gould, Oliver E. C. and Behl, Marc and Kratz, Karl and Lendlein, Andreas},
  title     = {Temperature-controlled reversible pore size change of electrospun fibrous shape-memory polymer actuator based meshes},
  series = {Smart materials and structures},
  volume    = {28},
  journal   = {Smart materials and structures},
  number    = {5},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {0964-1726},
  doi       = {10.1088/1361-665X/ab10a1},
  pages     = {10},
  year      = {2019},
  abstract  = {Fibrous membranes capable of dynamically responding to external stimuli are highly desirable in textiles and biomedical materials, where adaptive behavior is required to accommodate complex environmental changes. For example, the creation of fabrics with temperature-dependent moisture permeability or self-regulating membranes for air filtration is dependent on the development of materials that exhibit a reversible stimuli-responsive pore size change. Here, by imbuing covalently crosslinked poly(ε-caprolactone) (cPCL) fibrous meshes with a reversible bidirectional shape-memory polymer actuation (rbSMPA) we create a material capable of temperature-controlled changes in porosity. Cyclic thermomechanical testing was used to characterize the mechanical properties of the meshes, which were composed of randomly arranged microfibers with diameters of 2.3 ± 0.6 μm giving an average pore size of approx. 10 μm. When subjected to programming strains of εm = 300\% and 100\% reversible strain changes of εʹrev = 22\% ± 1\% and 6\% ± 1\% were measured, with switching temperature ranges of 10 °C-30 °C and 45 °C-60 °C for heating and cooling, respectively. The rbSMPA of cPCL fibrous meshes generated a microscale reversible pore size change of 11\% ± 3\% (an average of 1.5 ± 0.6 μm), as measured by scanning electron microscopy. The incorporation of a two-way shape-memory actuation capability into fibrous meshes is anticipated to advance the development and application of smart membrane materials, creating commercially viable textiles and devices with enhanced performance and novel functionality.},
  language  = {en}
}
@article{VishnevetskayaHildebrandNizardoetal.2019,
  author    = {Vishnevetskaya, Natalya S. and Hildebrand, Viet and Nizardo, Noverra Mardhatillah and Ko, Chia-Hsin and Di, Zhenyu and Radulescu, Aurel and Barnsley, Lester C. and M{\"u}ller-Buschbaum, Peter and Laschewsky, Andr{\´e} and Papadakis, Christine M.},
  title     = {All-in-One "Schizophrenic" self-assembly of orthogonally tuned thermoresponsive diblock copolymers},
  series = {Langmuir},
  volume    = {35},
  journal   = {Langmuir},
  number    = {19},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0743-7463},
  doi       = {10.1021/acs.langmuir.9b00241},
  pages     = {6441 -- 6452},
  year      = {2019},
  abstract  = {Smart, fully orthogonal switching was realized in a highly biocompatible diblock copolymer system with variable trigger-induced aqueous self-assembly. The polymers are composed of nonionic and zwitterionic blocks featuring lower and upper critical solution temperatures (LCSTs and UCSTs). In the system investigated, diblock copolymers from poly(N-isopropyl methacrylamide) (PNIPMAM) and a poly(sulfobetaine methacrylamide), systematic variation of the molar mass of the latter block allowed for shifting the UCST of the latter above the LCST of the PNIPMAM block in a salt-free condition. Thus, successive thermal switching results in "schizophrenic" micellization, in which the roles of the hydrophobic core block and the hydrophilic shell block are interchanged depending on the temperature. Furthermore, by virtue of the strong electrolyte-sensitivity of the zwitterionic polysulfobetaine block, we succeeded to shift its UCST below the LCST of the PNIPMAM block by adding small amounts of an electrolyte, thus inverting the pathway of switching. This superimposed orthogonal switching by electrolyte addition enabled us to control the switching scenarios between the two types of micelles (i) via an insoluble state, if the LCST-type cloud point is below the UCST-type cloud point, which is the case at low salt concentrations or (ii) via a molecularly dissolved state, if the LCST-type cloud point is above the UCST-type cloud point, which is the case at high salt concentrations. Systematic variation of the block lengths allowed for verifying the anticipated behavior and identifying the molecular architecture needed. The versatile and tunable self-assembly offers manifold opportunities, for example, for smart emulsifiers or for sophisticated carrier systems.},
  language  = {en}
}
@article{LiuGouldKratzetal.2020,
  author    = {Liu, Yue and Gould, Oliver E. C. and Kratz, Karl and Lendlein, Andreas},
  title     = {Shape-memory actuation of individual micro-/nanofibers},
  series = {MRS Advances},
  volume    = {5},
  journal   = {MRS Advances},
  number    = {46-47},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {2059-8521},
  doi       = {10.1557/adv.2020.276},
  pages     = {2391 -- 2399},
  year      = {2020},
  abstract  = {Advances in the fabrication and characterization of polymeric nanomaterials has greatly advanced the miniaturization of soft actuators, creating materials capable of replicating the functional physical behavior previously limited to the macroscale. Here, we demonstrate how a reversible shape-memory polymer actuation can be generated in a single micro/nano object, where the shape change during actuation of an individual fiber can be dictated by programming using an AFM-based method. Electrospinning was used to prepare poly(epsilon-caprolactone) micro-/nanofibers, which were fixed and crosslinked on a structured silicon wafer. The programming as well as the observation of recovery and reversible displacement of the fiber were performed by vertical three point bending, using an AFM testing platform introduced here. A plateau tip was utilized to improve the stability of the fiber contact and working distance, enabling larger deformations and greater rbSMPA performance. Values for the reversible elongation of epsilon(rev)= 3.4 +/- 0.1\% and 10.5 +/- 0.1\% were obtained for a single micro (d = 1.0 +/- 0.2 mu m) and nanofiber (d = 300 +/- 100 nm) in cyclic testing between the temperatures 10 and 60 degrees C. The reversible actuation of the nanofiber was successfully characterized for 10 cycles. The demonstration and characterization of individual shape-memory nano and microfiber actuators represents an important step in the creation of miniaturized robotic devices capable of performing complex physical functions at the length scale of cells and structural component of the extracellular matrix.},
  language  = {en}
}
@article{IzraylitGouldKratzetal.2020,
  author    = {Izraylit, Victor and Gould, Oliver E. C. and Kratz, Karl and Lendlein, Andreas},
  title     = {Investigating the phase-morphology of PLLA-PCL multiblock copolymer/PDLA blends cross-linked using stereocomplexation},
  series = {MRS advances},
  volume    = {5},
  journal   = {MRS advances},
  number    = {14-15},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {2059-8521},
  doi       = {10.1557/adv.2019.465},
  pages     = {699 -- 707},
  year      = {2020},
  abstract  = {The macroscale function of multicomponent polymeric materials is dependent on their phase-morphology. Here, we investigate the morphological structure of a multiblock copolymer consisting of poly(L-lactide) and poly(epsilon-caprolactone) segments (PLLA-PCL), physically cross-linked by stereocomplexation with a low molecular weight poly(D-lactide) oligomer (PDLA). The effects of blend composition and PLLA-PCL molecular structure on the morphology are elucidated by AFM, TEM and SAXS. We identify the formation of a lattice pattern, composed of PLA domains within a PCL matrix, with an average domain spacing d0 = 12 - 19 nm. The size of the PLA domains were found to be proportional to the block length of the PCL segment of the copolymer and inversely proportional to the PDLA content of the blend. Changing the PLLA-PCL / PDLA ratio caused a shift in the melt transition Tm attributed to the PLA stereocomplex crystallites, indicating partial amorphous phase dilution of the PLA and PCL components within the semicrystalline material. By elucidating the phase structure and thermal character of multifunctional PLLA-PCL / PDLA blends, we illustrate how composition affects the internal structure and thermal properties of multicomponent polymeric materials. This study should facilitate the more effective incorporation of a variety of polymeric structural units capable of stimuli responsive phase transitions, where an understanding the phase-morphology of each component will enable the production of multifunctional soft-actuators with enhanced performance.},
  language  = {en}
}
@article{IzraylitHommesSchattmannNeffeetal.2020,
  author    = {Izraylit, Victor and Hommes-Schattmann, Paul Jacob and Neffe, Axel T. and Gould, Oliver E. C. and Lendlein, Andreas},
  title     = {Alkynyl-functionalized chain-extended PCL for coupling to biological molecules},
  series = {European polymer journal},
  volume    = {136},
  journal   = {European polymer journal},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0014-3057},
  doi       = {10.1016/j.eurpolymj.2020.109908},
  pages     = {11},
  year      = {2020},
  abstract  = {Chemical functionalization of poly(epsilon-caprolactone) (PCL) enables a molecular integration of additional function. Here, we report an approach to incorporate reactive alkynyl side-groups by synthesizing a chain-extended PCL, where the reactive site is introduced through the covalently functionalizable chain extender 3 (prop-2-yn-1-yloxy)propane-1,2-diol (YPD). Chain-extended PCL with M-w of 101 to 385 kg.mol(-1) were successfully synthesized in a one-pot reaction from PCL-diols with various molar masses, L-lysine ethyl ester diisocyanate (LDI) or trimethyl(hexamethylene)diisocyanate (TMDI), and YPD, in which the density of functionalizable groups and spacing between them can be controlled by the composition of the polymer. The employed diisocyanate compounds and YPD possess an asymmetric structure and form a non-crystallizable segment leaving the PCL crystallites to dominate the material's mechanical properties. The mixed glass transition temperature T-g = - 60 to - 46 degrees C of the PCL/polyurethane amorphous phase maintains the synthesized materials in a highly elastic state at ambient and physiological conditions. Reaction conditions for covalent attachment in copper(I)-catalyzed azide-alkyne-cycloaddition reactions (CuAAC) in solution were optimized in a series of model reactions between the alkyne moieties of the chain-extended PCL and benzyl azide, reaching conversions over 95\% of the alkyne moieties and with yields of up to 94\% for the purified functionalized PCL. This methodology was applied for reaction with the azide-functionalized cell adhesion peptide GRGDS. The required modification of the peptide provides selectivity in the coupling reactions. The obtained results suggest that YPD could potentially be employed as versatile molecular unit for the creation of a variety of functionalizable polyesters as well as polyurethanes and polycarbonates offering efficient and selective click-reactions.},
  language  = {en}
}
@article{IzraylitHommesSchattmannNeffeetal.2020,
  author    = {Izraylit, Victor and Hommes-Schattmann, Paul J. and Neffe, Axel T. and Gould, Oliver E. C. and Lendlein, Andreas},
  title     = {Polyester urethane functionalizable through maleimide side-chains and cross-linkable by polylactide stereocomplexes},
  series = {European polymer journal},
  volume    = {137},
  journal   = {European polymer journal},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0014-3057},
  doi       = {10.1016/j.eurpolymj.2020.109916},
  pages     = {8},
  year      = {2020},
  abstract  = {Sustainable multifunctional alternatives to fossil-derived materials, which can be functionalized and are degradable, can be envisioned by combining naturally derived starting materials with an established polymer design concept. Modularity and chemical flexibility of polyester urethanes (PEU) enable the combination of segments bearing functionalizable moieties and the tailoring of the mechanical and thermal properties. In this work, a PEU multiblock structure was synthesized from naturally derived L-lysine diisocyanate ethyl ester (LDI), poly(L-lactide) diol (PLLA) and N-(2,3-dihydroxypropyl)-maleimide (MID) in a one-step reaction. A maleimide side-chain (MID) provided a reactive site for the catalyst-free coupling of thiols shown for L-cysteine with a yield of 94\%. Physical cross-links were generated by blending the PEU with poly(D-lactide) (PDLA), upon which the PLLA segments of the PEU and the PDLA formed stereocomplexes. Stereocomplexation occurred spontaneously during solution casting and was investigated with WAXS and DSC. Stereocomplex crystallites were observed in the blends, while isotactic PLA crystallization was not observed. The presented material platform with tailorable mechanical properties by blending is of specific interest for engineering biointerfaces of implants or carrier systems for bioactive molecules.},
  language  = {en}
}
@article{LiuGouldRudolphetal.2020,
  author    = {Liu, Yue and Gould, Oliver E. C. and Rudolph, Tobias and Fang, Liang and Kratz, Karl and Lendlein, Andreas},
  title     = {Polymeric microcuboids programmable for temperature-memory},
  series = {Macromolecular materials and engineering},
  volume    = {305},
  journal   = {Macromolecular materials and engineering},
  number    = {10},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1438-7492},
  doi       = {10.1002/mame.202000333},
  pages     = {7},
  year      = {2020},
  abstract  = {Microobjects with programmable mechanical functionality are highly desirable for the creation of flexible electronics, sensors, and microfluidic systems, where fabrication/programming and quantification methods are required to fully control and implement dynamic physical behavior. Here, programmable microcuboids with defined geometries are prepared by a template-based method from crosslinked poly[ethylene-co-(vinyl acetate)] elastomers. These microobjects could be programmed to exhibit a temperature-memory effect or a shape-memory polymer actuation capability. Switching temperaturesT(sw)during shape recovery of 55 +/- 2, 68 +/- 2, 80 +/- 2, and 86 +/- 2 degrees C are achieved by tuning programming temperatures to 55, 70, 85, and 100 degrees C, respectively. Actuation is achieved with a reversible strain of 2.9 +/- 0.2\% to 6.7 +/- 0.1\%, whereby greater compression ratios and higher separation temperatures induce a more pronounced actuation. Micro-geometry change is quantified using optical microscopy and atomic force microscopy. The realization and quantification of microparticles, capable of a tunable temperature responsive shape-change or reversible actuation, represent a key development in the creation of soft microscale devices for drug delivery or microrobotics.},
  language  = {en}
}
@misc{DengWangXuaetal.2020,
  author    = {Deng, Zijun and Wang, Weiwei and Xua, Xun and Gould, Oliver E. C. and Kratz, Karl and Ma, Nan and Lendlein, Andreas},
  title     = {Polymeric sheet actuators with programmable bioinstructivity},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {4},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-51549},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-515490},
  pages     = {9},
  year      = {2020},
  abstract  = {Stem cells are capable of sensing and processing environmental inputs, converting this information to output a specific cell lineage through signaling cascades. Despite the combinatorial nature of mechanical, thermal, and biochemical signals, these stimuli have typically been decoupled and applied independently, requiring continuous regulation by controlling units. We employ a programmable polymer actuator sheet to autonomously synchronize thermal and mechanical signals applied to mesenchymal stem cells (MSC5). Using a grid on its underside, the shape change of polymer sheet, as well as cell morphology, calcium (Ca2+) influx, and focal adhesion assembly, could be visualized and quantified. This paper gives compelling evidence that the temperature sensing and mechanosensing of MSC5 are interconnected via intracellular Ca2+. Up-regulated Ca2+ levels lead to a remarkable alteration of histone H3K9 acetylation and activation of osteogenic related genes. The interplay of physical, thermal, and biochemical signaling was utilized to accelerate the cell differentiation toward osteogenic lineage. The approach of programmable bioinstructivity provides a fundamental principle for functional biomaterials exhibiting multifaceted stimuli on differentiation programs. Technological impact is expected in the tissue engineering of periosteum for treating bone defects.},
  language  = {en}
}
@article{DengWangXuaetal.2020,
  author    = {Deng, Zijun and Wang, Weiwei and Xua, Xun and Gould, Oliver E. C. and Kratz, Karl and Ma, Nan and Lendlein, Andreas},
  title     = {Polymeric sheet actuators with programmable bioinstructivity},
  series = {PNAS},
  volume    = {117},
  journal   = {PNAS},
  number    = {4},
  publisher = {National Academy of Sciences},
  address   = {Washington, DC},
  issn      = {1091-6490},
  doi       = {10.1073/pnas.1910668117},
  pages     = {1895 -- 1901},
  year      = {2020},
  abstract  = {Stem cells are capable of sensing and processing environmental inputs, converting this information to output a specific cell lineage through signaling cascades. Despite the combinatorial nature of mechanical, thermal, and biochemical signals, these stimuli have typically been decoupled and applied independently, requiring continuous regulation by controlling units. We employ a programmable polymer actuator sheet to autonomously synchronize thermal and mechanical signals applied to mesenchymal stem cells (MSC5). Using a grid on its underside, the shape change of polymer sheet, as well as cell morphology, calcium (Ca2+) influx, and focal adhesion assembly, could be visualized and quantified. This paper gives compelling evidence that the temperature sensing and mechanosensing of MSC5 are interconnected via intracellular Ca2+. Up-regulated Ca2+ levels lead to a remarkable alteration of histone H3K9 acetylation and activation of osteogenic related genes. The interplay of physical, thermal, and biochemical signaling was utilized to accelerate the cell differentiation toward osteogenic lineage. The approach of programmable bioinstructivity provides a fundamental principle for functional biomaterials exhibiting multifaceted stimuli on differentiation programs. Technological impact is expected in the tissue engineering of periosteum for treating bone defects.},
  language  = {en}
}
@article{LiuGouldKratzetal.2022,
  author    = {Liu, Yue and Gould, Oliver E. C. and Kratz, Karl and Lendlein, Andreas},
  title     = {On demand sequential release of (sub)micron particles controlled by size and temperature},
  series = {Small : nano micro},
  volume    = {18},
  journal   = {Small : nano micro},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1613-6810},
  doi       = {10.1002/smll.202104621},
  pages     = {8},
  year      = {2022},
  abstract  = {Polymeric devices capable of releasing submicron particles (subMP) on demand are highly desirable for controlled release systems, sensors, and smart surfaces. Here, a temperature-memory polymer sheet with a programmable smooth surface served as matrix to embed and release polystyrene subMP controlled by particle size and temperature. subMPs embedding at 80 degrees C can be released sequentially according to their size (diameter D of 200 nm, 500 nm, 1 mu m) when heated. The differences in their embedding extent are determined by the various subMPs sizes and result in their distinct release temperatures. Microparticles of the same size (D approximate to 1 mu m) incorporated in films at different programming temperatures T-p (50, 65, and 80 degrees C) lead to a sequential release based on the temperature-memory effect. The change of apparent height over the film surface is quantified using atomic force microscopy and the realization of sequential release is proven by confocal laser scanning microscopy. The demonstration and quantification of on demand subMP release are of technological impact for assembly, particle sorting, and release technologies in microtechnology, catalysis, and controlled release.},
  language  = {en}
}
@article{AbbasiXuKhezrietal.2022,
  author    = {Abbasi, Ali and Xu, Yaolin and Khezri, Ramin and Etesami, Mohammad and Lin, C. and Kheawhom, Soorathep and Lu, Yan},
  title     = {Advances in characteristics improvement of polymeric membranes/separators for zinc-air batteries},
  series = {Materials Today Sustainability},
  volume    = {18},
  journal   = {Materials Today Sustainability},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2589-2347},
  doi       = {10.1016/j.mtsust.2022.100126},
  pages     = {17},
  year      = {2022},
  abstract  = {Zinc-air batteries (ZABs) are gaining popularity for a wide range of applications due to their high energy density, excellent safety, and environmental friendliness. A membrane/separator is a critical component of ZABs, with substantial implications for battery performance and stability, particularly in the case of a battery in solid state format, which has captured increased attention in recent years. In this review, recent advances as well as insight into the architecture of polymeric membrane/separators for ZABs including porous polymer separators (PPSs), gel polymer electrolytes (GPEs), solid polymer electrolytes (SPEs) and anion exchange membranes (AEMs) are discussed. The paper puts forward strategies to enhance stability, ionic conductivity, ionic selectivity, electrolyte storage capacity and mechanical properties for each type of polymeric membrane. In addition, the remaining major obstacles as well as the most potential avenues for future research are examined in detail.},
  language  = {en}
}
@article{PessanhaPaschoalinoDerocoetal.2022,
  author    = {Pessanha, Tatiana and Paschoalino, Waldemir J. and Deroco, Patricia B. and Kogikoski Junior, Sergio and Moraes, Ana C. M. de and Carvalho Castro de Silva, Cecilia de and Kubota, Lauro T.},
  title     = {Interfacial capacitance of graphene oxide films electrodes},
  series = {Electroanalysis : an internatinal journal devoted to electroanalysis, sensors and bioelectronic devices},
  volume    = {34},
  journal   = {Electroanalysis : an internatinal journal devoted to electroanalysis, sensors and bioelectronic devices},
  number    = {4},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1521-4109},
  doi       = {10.1002/elan.202100220},
  pages     = {692 -- 700},
  year      = {2022},
  abstract  = {The understanding of bidimensional materials dynamics and its electrolyte interface equilibrium, such as graphene oxide (GO), is critical for the development of a capacitive biosensing platform. The interfacial capacitance (C-i) of graphene-based materials may be tuned by experimental conditions such as pH optimization and cation size playing key roles at the enhancement of their capacitive properties allowing their application as novel capacitive biosensors. Here we reported a systematic study of C-i of multilayer GO films in different aqueous electrolytes employing electrochemical impedance spectroscopy for the application in a capacitive detection system. We demonstrated that the presence of ionizable oxygen-containing functional groups within multilayer GO film favors the interactions and the accumulation of cations in the structure of the electrodes enhancing the GO C-i in aqueous solutions, where at pH 7.0 (the best condition) the C-i was 340 mu F mg(-1) at -0.01 V vs Ag/AgCl. We also established that the hydrated cation radius affects the mobility and interaction with GO functional groups and it plays a critical role in the Ci, as demonstrated in the presence of different cations Na+=640 mu F mg(-1), Li+=575 mu F mg(-1) and TMA(+)=477 mu F mg(-1). As a proof-of-concept, the capacitive behaviour of GO was explored as biosensing platform for standard streptavidin-biotin systems. For this system, the C-i varied linearly with the log of the concentration of the targeting analyte in the range from 10 pg mL(-1) to 100 ng mL(-1), showing the promising applicability of capacitive GO based sensors for label-free biosensing.},
  language  = {en}
}