@article{WessigGerngrossPapeetal.2014,
  author    = {Wessig, Pablo and Gerngroß, Maik and Pape, Simon and Bruhns, Philipp and Weber, Jens},
  title     = {Novel porous materials based on oligospiroketals (OSK)},
  series = {RSC Advances : an international journal to further the chemical sciences},
  volume    = {2014},
  journal   = {RSC Advances : an international journal to further the chemical sciences},
  number    = {4},
  issn      = {2046-2069},
  doi       = {10.1039/c4ra04437a},
  pages     = {31123 -- 31129},
  year      = {2014},
  abstract  = {New porous materials based on covalently connected monomers are presented. The key step of the synthesis is an acetalisation reaction. In previous years we used acetalisation reactions extensively to build up various molecular rods. Based on this approach, investigations towards porous polymeric materials were conducted by us. Here we wish to present the results of these studies in the synthesis of 1D polyacetals and porous 3D polyacetals. By scrambling experiments with 1D acetals we could prove that exchange reactions occur between different building blocks (evidenced by MALDI-TOF mass spectrometry). Based on these results we synthesized porous 3D polyacetals under the same mild conditions.},
  language  = {en}
}
@misc{WessigGerngrossPapeetal.2014,
  author    = {Wessig, Pablo and Gerngroß, Maik and Pape, Simon and Bruhns, Philipp and Weber, Jens},
  title     = {Novel porous materials based on oligospiroketals (OSK)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-74466},
  pages     = {31123 -- 31129},
  year      = {2014},
  abstract  = {New porous materials based on covalently connected monomers are presented. The key step of the synthesis is an acetalisation reaction. In previous years we used acetalisation reactions extensively to build up various molecular rods. Based on this approach, investigations towards porous polymeric materials were conducted by us. Here we wish to present the results of these studies in the synthesis of 1D polyacetals and porous 3D polyacetals. By scrambling experiments with 1D acetals we could prove that exchange reactions occur between different building blocks (evidenced by MALDI-TOF mass spectrometry). Based on these results we synthesized porous 3D polyacetals under the same mild conditions.},
  language  = {en}
}
@article{LambersWeber2020,
  author    = {Lambers, Leen and Weber, Jens},
  title     = {Preface to the special issue on the 11th International Conference on Graph Transformation},
  series = {Journal of Logical and Algebraic Methods in Programming},
  volume    = {112},
  journal   = {Journal of Logical and Algebraic Methods in Programming},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2352-2208},
  doi       = {10.1016/j.jlamp.2020.100525},
  pages     = {2},
  year      = {2020},
  abstract  = {This special issue contains extended versions of four selected papers from the 11th International Conference on Graph Transformation (ICGT 2018). The articles cover a tool for computing core graphs via SAT/SMT solvers (graph language definition), graph transformation through graph surfing in reaction systems (a new graph transformation formalism), the essence and initiality of conflicts in M-adhesive transformation systems, and a calculus of concurrent graph-rewriting processes (theory on conflicts and parallel independence).},
  language  = {en}
}
@article{WessigGerngrossPapeetal.2014,
  author    = {Wessig, Pablo and Gerngross, Maik and Pape, Simon and Bruhns, Philipp and Weber, Jens},
  title     = {Novel porous materials based on oligospiroketals (OSK)},
  series = {RSC Advances},
  volume    = {4},
  journal   = {RSC Advances},
  number    = {59},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {2046-2069},
  doi       = {10.1039/c4ra04437a},
  pages     = {31123 -- 31129},
  year      = {2014},
  abstract  = {New porous materials based on covalently connected monomers are presented. The key step of the synthesis is an acetalisation reaction. In previous years we used acetalisation reactions extensively to build up various molecular rods. Based on this approach, investigations towards porous polymeric materials were conducted by us. Here we wish to present the results of these studies in the synthesis of 1D polyacetals and porous 3D polyacetals. By scrambling experiments with 1D acetals we could prove that exchange reactions occur between different building blocks (evidenced by MALDI-TOF mass spectrometry). Based on these results we synthesized porous 3D polyacetals under the same mild conditions.},
  language  = {en}
}
@phdthesis{Weber2007,
  author    = {Weber, Jens},
  title     = {Meso- und mikropor{\"o}se Hochleistungspolymere : Synthese, Analytik und Anwendungen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-15994},
  school      = {Universit{\"a}t Potsdam},
  year      = {2007},
  abstract  = {Die Arbeit beschreibt die Synthese, Charakterisierung und Anwendung von meso- und mikropor{\"o}sen Hochleistungspolymeren. Im ersten Teil wird die Synthese von mesopor{\"o}sen Polybenzimidazol (PBI) auf der Basis einer Templatierungsmethode vorgestellt. Auf der Grundlage kommerzieller Monomere und Silikatnanopartikel sowie eines neuen Vernetzers wurde ein Polymer-Silikat-Hybridmaterial aufgebaut. Das Herausl{\"o}sen des Silikats mit Ammoniumhydrogendifluorid f{\"u}hrt zu mesopor{\"o}sen Polybenzimidazolen mit spherischen Poren von 9 bis 11 nm Durchmesser. Die Abh{\"a}ngigkeit der beobachteten Porosit{\"a}t vom Massenverh{\"a}ltnis Silikat zu Polymer wurde ebenso untersucht wie die Abh{\"a}ngigkeit der Porosit{\"a}t vom Vernetzergehalt. Die Porosit{\"a}t vollvernetzter Proben zeigt eine lineare Abh{\"a}ngigkeit vom Verh{\"a}ltnis Silikat zu Polymer bis zu einem Grenzwert von 1. Wird der Grenzwert {\"u}berschritten, ist teilweiser Porenkollaps zu beobachten. Die Abh{\"a}ngigkeit der Porosit{\"a}t vom Vernetzergehalt bei festem Silikatgehalt ist nichtlinear. Oberhalb einer kritischen Vernetzerkonzentration wird eine komplette Replikation der Nanopartikel gefunden. Ist die Vernetzerkonzentration dagegen kleiner als der kritische Wert, so ist der v{\"o}llige Kollaps einiger Poren bei Stabilit{\"a}t der verbleibenden Poren zu beobachten. Ein komplett unpor{\"o}ses PBI resultiert bei Abwesenheit des Vernetzers. Die mesopor{\"o}sen PBI-Netzwerke konnten kontrolliert mit Phosphors{\"a}ure beladen werden. Die erhaltenen Addukte wurden auf ihre Protonenleitf{\"a}higkeit untersucht. Es kann gezeigt werden, dass die Nutzung der vordefinierten Morphologie im Vergleich zu einem unstrukturierten PBI in h{\"o}heren Leitf{\"a}higkeiten resultiert. Durch die vernetzte Struktur war des Weiteren gen{\"u}gend mechanische Stabilit{\"a}t gegeben, um die Addukte reversibel und bei sehr guten Leitf{\"a}higkeiten bis zu Temperaturen von 190°C bei 0\% relativer Feuchtigkeit zu untersuchen. Dies ist f{\"u}r unstrukturierte Phosphors{\"a}ure/PBI - Addukte aus linearem PBI nicht m{\"o}glich. Im zweiten Teil der Arbeit wird die Synthese intrinsisch mikropor{\"o}ser Polyamide und Polyimide vorgestellt. Das Konzept intrinsisch mikropor{\"o}ser Polymere konnte damit auf weitere Polymerklassen ausgeweitet werden. Als zentrales, strukturinduzierendes Motiv wurde 9,9'-Spirobifluoren gew{\"a}hlt. Dieses Molek{\"u}l ist leicht und vielf{\"a}ltig zu di- bzw. tetrafunktionellen Monomeren modifizierbar. Dabei wurden bestehende Synthesevorschriften modifiziert bzw. neue Vorschriften entwickelt. Ein erster Schwerpunkt innerhalb des Kapitels lag in der Synthese und Charakterisierung von l{\"o}slichen, intrinsisch mikropor{\"o}sen, aromatischen Polyamid und Polyimid. Es konnte gezeigt werden, dass das Beobachten von Mikroporosit{\"a}t stark von der molekularen Architektur und der Verarbeitung der Polymere abh{\"a}ngig ist. Die Charakterisierung der Porosit{\"a}t erfolgte unter Nutzung von Stickstoffsorption, Kleinwinkelr{\"o}ntgenstreuung und Molecular Modeling. Es konnte gezeigt werden, dass die Proben stark vom Umgebungsdruck abh{\"a}ngigen Deformationen unterliegen. Die starke Quellung der Proben w{\"a}hrend des Sorptionsvorgangs konnte durch Anwendung des "dual sorption" Modells, also dem Auftreten von Porenf{\"u}llung und dadurch induzierter Henry-Sorption, erkl{\"a}rt werden. Der zweite Schwerpunkt des Kapitels beschreibt die Synthese und Charakterisierung mikropor{\"o}ser Polyamid- und Polyimidnetzwerke. W{\"a}hrend Polyimidnetzwerke auf Spirobifluorenbasis ausgepr{\"a}gte Mikroporosit{\"a}t und spezifische Oberfl{\"a}chen von ca. 1100 m²/g aufwiesen, war die Situation f{\"u}r entsprechende Polyamidnetzwerke abweichend. Mittels Stickstoffsorption konnte keine Mikroporosit{\"a}t nachgewiesen werden, jedoch konnte mittels SAXS eine innere Grenzfl{\"a}che von ca. 300 m²/g nachgewiesen werden. Durch die in dieser Arbeit gezeigten Experimente kann die Grenze zwischen Polymeren mit hohem freien Volumen und mikropor{\"o}sen Polymeren somit etwas genauer gezogen werden. ausgepr{\"a}gte Mikroporosit{\"a}t kann nur in extrem steifen Strukturen nachgewiesen werden. Die Kombination der Konzepte "Mesoporosit{\"a}t durch Templatierung" und "Mikroporosit{\"a}t durch strukturierte Monomere" hatte ein hierarchisch strukturiertes Polybenzimidazol zum Ergebnis. Die Pr{\"a}senz einer Strukturierung im molekularen Maßstab konnte SAXS bewiesen werden. Das so strukturierte Polybenzimidazol zeichnete sich durch eine h{\"o}here Protonenleitf{\"a}higkeit im Vergleich zu einem rein mesopor{\"o}sen PBI aus. Der letzte Teil der Arbeit besch{\"a}ftigte sich mit der Entwicklung einer neuen Synthesemethode zur Herstellung von Polybenzimidazol. Es konnte gezeigt werden, dass lineares PBI in einer eutektischen Salzschmelze aus Lithium- und Kaliumchlorid synthetisiert werden kann. Die Umsetzung der spirobifluorenbasierten Monomere zu l{\"o}slichem oder vernetztem PBI ist in der Salzschmelze m{\"o}glich.},
  language  = {de}
}
@article{GoebelHesemannWeberetal.2009,
  author    = {Goebel, Ronald and Hesemann, Peter and Weber, Jens and Moeller, El{\´e}onore and Friedrich, Alwin and Beuermann, Sabine and Taubert, Andreas},
  title     = {Surprisingly high, bulk liquid-like mobility of silica-confined ionic liquids},
  issn      = {1463-9076},
  doi       = {10.1039/B821833a},
  year      = {2009},
  abstract  = {Mesoporous silica monoliths were prepared by the sol - gel technique and. lled with 1-ethyl-3-methyl imidazolium [Emim]-X (X = dicyanamide [N(CN)(2)], ethyl sulfate [EtSO4], thiocyanate [SCN], and triflate [TfO]) ionic liquids (ILs) using a methanol-IL exchange technique. The structure and behavior of the ILs inside the silica monoliths were studied using X-ray scattering, nitrogen sorption, IR spectroscopy, solid-state NMR, and thermal analysis. DSC finds shifts in both the glass transition temperature and melting points (where applicable) of the ILs. Glass transition and melting occur well below room temperature. There is thus no conflict with the NMR and IR data, which show that the ILs are as mobile at room temperature as the bulk (not confined) ILs. The very narrow line widths of the NMR spectra suggest that the ILs in our materials have the highest mobility reported for confined ILs so far. As a result, our data suggest that it is possible to generate IL/silica hybrid materials (ionogels) with bulk-like properties of the IL. This could be interesting for applications in, e.g., the solar cell or membrane fields.},
  language  = {en}
}
@article{XieWhiteWeberetal.2011,
  author    = {Xie, Zai-Lai and White, Robin J. and Weber, Jens and Taubert, Andreas and Titirici, Magdalena M.},
  title     = {Hierarchical porous carbonaceous materials via ionothermal carbonization of carbohydrates},
  series = {Journal of materials chemistry},
  volume    = {21},
  journal   = {Journal of materials chemistry},
  number    = {20},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {0959-9428},
  doi       = {10.1039/c1jm00013f},
  pages     = {7434 -- 7442},
  year      = {2011},
  abstract  = {We report on the ionothermal synthesis of porous carbon materials from a variety of carbohydrate precursors (i.e. D-glucose, D-fructose, D-xylose, and starch) using 1-butyl-3-methylimidazolium tetrachloroferrate(III), [Bmim][FeCl(4)] as a reusable solvent and catalyst. The carbon materials derived from these different carbohydrates are similar in terms of particle size and chemical composition, possessing relatively high surface areas from 44 to 155 m(2) g(-1) after ionothermal processing, which can be significantly increased to > 350 m(2) g(-1) by further thermal treatment (e. g. post-carbonization at 750 degrees C). CO(2) and N(2) sorption analysis, combined with Hg intrusion porosimetry, reveals a promising hierarchical pore structuring to these carbon materials. The ionic liquid [Bmim][FeCl(4)] has a triple role: it acts as both a soft template to generate the characterized pore structuring, solvent and as a catalyst resulting in enhanced ionothermal carbon yields. Importantly from a process point of view, the ionic liquid can be successfully recovered and reused. The current work shows that ionothermal synthesis has the potential to be an effective, low cost, and green reusable synthetic route towards sustainable porous carbon materials.},
  language  = {en}
}
@article{UnuabonahNoeskeWeberetal.2019,
  author    = {Unuabonah, Emmanuel and N{\"o}ske, Robert and Weber, Jens and G{\"u}nter, Christina and Taubert, Andreas},
  title     = {New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water},
  series = {Beilstein journal of nanotechnology},
  volume    = {10},
  journal   = {Beilstein journal of nanotechnology},
  publisher = {Beilstein-Institut zur F{\"o}rderung der Chemischen Wissenschaften},
  address   = {Frankfurt, Main},
  issn      = {2190-4286},
  doi       = {10.3762/bjnano.10.11},
  pages     = {119 -- 131},
  year      = {2019},
  abstract  = {A new micro/mesoporous hybrid clay nanocomposite prepared from kaolinite clay, Carica papaya seeds, and ZnCl2 via calcination in an inert atmosphere is presented. Regardless of the synthesis temperature, the specific surface area of the nanocomposite material is between approximate to 150 and 300 m(2)/g. The material contains both micro- and mesopores in roughly equal amounts. X-ray diffraction, infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy suggest the formation of several new bonds in the materials upon reaction of the precursors, thus confirming the formation of a new hybrid material. Thermogravimetric analysis/differential thermal analysis and elemental analysis confirm the presence of carbonaceous matter. The new composite is stable up to 900 degrees C and is an efficient adsorbent for the removal of a water micropollutant, 4-nitrophenol, and a pathogen, E. coli, from an aqueous medium, suggesting applications in water remediation are feasible.},
  language  = {en}
}
@article{UnuabonahGuenterWeberetal.2013,
  author    = {Unuabonah, Emmanuel I. and G{\"u}nter, Christina and Weber, Jens and Lubahn, Susanne and Taubert, Andreas},
  title     = {Hybrid Clay - a new highly efficient adsorbent for water treatment},
  series = {ACS sustainable chemistry \& engineering},
  volume    = {1},
  journal   = {ACS sustainable chemistry \& engineering},
  number    = {8},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {2168-0485},
  doi       = {10.1021/sc400051y},
  pages     = {966 -- 973},
  year      = {2013},
  abstract  = {New hybrid clay adsorbent based on kaolinite clay and Carica papaya seeds with improved cation exchange capacity (CEC), rate of heavy metal ion uptake, and adsorption capacity for heavy metal ions were prepared. The CEC of the new material is ca. 75 meq/100 g in spite of the unexpectedly low surface area (approximate to 19 m(2)/g). Accordingly, the average particle size of the hybrid clay adsorbent decreased from over 200 to 100 pm. The hybrid clay adsorbent is a highly efficient adsorbent for heavy metals. With an initial metal concentration of 1 mg/L, the hybrid clay adsorbent reduces the Cd2+, Ni2+, and Pb2+ concentration in aqueous solution to <= 4, <= 7 and <= 20 mu g/L, respectively, from the first minute to over 300 min using a fixed bed containing 2 g of adsorbent and a flow rate of approximate to 7 mL/min. These values are (with the exception of Pb2+) in line with the WHO permissible limits for heavy metal ions. In a cocktail solution of Cd2+, and Ni2+, the hybrid clay shows a reduced rate of uptake but an increased adsorption capacity. The CEC data suggest that the adsorption of Pb2+, Cd2+, and Ni2+ on the hybrid clay adsorbent is essentially due to ion exchange. This hybrid clay adsorbent is prepared from materials that are abundant and by a simple means that is sustainable, easily recovered from aqueous solution, nonbiodegradable (unlike numerous biosorbent), and easily regenerated and is a highly efficient alternative to activated carbon for water treatment.},
  language  = {en}
}
@misc{UnuabonahNoeskeWeberetal.2019,
  author    = {Unuabonah, Emmanuel I. and N{\"o}ske, Robert and Weber, Jens and G{\"u}nter, Christina and Taubert, Andreas},
  title     = {New micro/mesoporous nanocomposite material from low-cost sources for the efficient removal of aromatic and pathogenic pollutants from water},
  series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  number    = {720},
  doi       = {10.25932/publishup-42621},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426214},
  pages     = {119 -- 131},
  year      = {2019},
  abstract  = {A new micro/mesoporous hybrid clay nanocomposite prepared from kaolinite clay, Carica papaya seeds, and ZnCl2 via calcination in an inert atmosphere is presented. Regardless of the synthesis temperature, the specific surface area of the nanocomposite material is between ≈150 and 300 m2/g. The material contains both micro- and mesopores in roughly equal amounts. X-ray diffraction, infrared spectroscopy, and solid-state nuclear magnetic resonance spectroscopy suggest the formation of several new bonds in the materials upon reaction of the precursors, thus confirming the formation of a new hybrid material. Thermogravimetric analysis/differential thermal analysis and elemental analysis confirm the presence of carbonaceous matter. The new composite is stable up to 900 °C and is an efficient adsorbent for the removal of a water micropollutant, 4-nitrophenol, and a pathogen, E. coli, from an aqueous medium, suggesting applications in water remediation are feasible.},
  language  = {en}
}
@article{DebatinBehrensWeberetal.2012,
  author    = {Debatin, Franziska and Behrens, Karsten and Weber, Jens and Baburin, Igor A. and Thomas, Arne and Schmidt, Johannes and Senkovska, Irena and Kaskel, Stefan and Kelling, Alexandra and Hedin, Niklas and Bacsik, Zoltan and Leoni, Stefano and Seifert, Gotthard and J{\"a}ger, Christian and G{\"u}nter, Christina and Schilde, Uwe and Friedrich, Alwin and Holdt, Hans-J{\"u}rgen},
  title     = {An isoreticular family of microporous metal-organic frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate Syntheses, structures and properties},
  series = {Chemistry - a European journal},
  volume    = {18},
  journal   = {Chemistry - a European journal},
  number    = {37},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201200889},
  pages     = {11630 -- 11640},
  year      = {2012},
  abstract  = {We report on a new series of isoreticular frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate (IFP-14, IFP=imidazolate framework Potsdam) that form one-dimensional, microporous hexagonal channels. Varying R in the 2-substitued linker (R=Me (IFP-1), Cl (IFP-2), Br (IFP-3), Et (IFP-4)) allowed the channel diameter (4.01.7 angstrom), the polarisability and functionality of the channel walls to be tuned. Frameworks IFP-2, IFP-3 and IFP-4 are isostructural to previously reported IFP-1. The structures of IFP-2 and IFP-3 were solved by X-ray crystallographic analyses. The structure of IFP-4 was determined by a combination of PXRD and structure modelling and was confirmed by IR spectroscopy and 1H MAS and 13C CP-MAS NMR spectroscopy. All IFPs showed high thermal stability (345400?degrees C); IFP-1 and IFP-4 were stable in boiling water for 7 d. A detailed porosity analysis was performed on the basis of adsorption measurements by using various gases. The potential of the materials to undergo specific interactions with CO2 was investigated by measuring the isosteric heats of adsorption. The capacity to adsorb CH4 (at 298 K), CO2 (at 298 K) and H2 (at 77 K) at high pressure were also investigated. In situ IR spectroscopy showed that CO2 is physisorbed on IFP-14 under dry conditions and that both CO2 and H2O are physisorbed on IFP-1 under moist conditions.},
  language  = {en}
}
@article{BehrensMondalNoeskeetal.2015,
  author    = {Behrens, Karsten and Mondal, Suvendu Selchar and N{\"o}ske, Robert and Baburin, Igor A. and Leoni, Stefano and G{\"u}nter, Christina and Weber, Jens and Holdt, Hans-J{\"u}rgen},
  title     = {Microwave-Assisted Synthesis of Defects Metal-Imidazolate-Amide-Imidate Frameworks and Improved CO2 Capture},
  series = {Inorganic chemistry},
  volume    = {54},
  journal   = {Inorganic chemistry},
  number    = {20},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0020-1669},
  doi       = {10.1021/acs.inorgchem.5b01952},
  pages     = {10073 -- 10080},
  year      = {2015},
  abstract  = {In this work, we report three isostructural 3D frameworks, named IFP-11 (R = Cl), IFP-12 (R = Br), and IFP-13 (R = Et) (IFP = Imidazolate Framework Potsdam) based on a cobalt(II) center and the chelating linker 2-substituted imidazolate-4-amide-5-imidate. These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under microwave (MW)-assisted conditions in DMF. Structure determination of these IFPs was investigated by IR spectroscopy and a combination of powder X-ray diffraction (PXRD) with structure modeling. The structural models were initially built up from the single-crystal X-ray structure determination of IFP-5 (a cobalt center and 2-methylimidazolate-4-amide-5-imidate linker based framework) and were optimized by using density functional theory calculations. Substitution on position 2 of the linker (R = Cl, Br, and Et) in the isostructural IFP-11, -12, and -13 allowed variation of the potential pore window in 1D hexagonal channels (3.8 to 1.7 angstrom A). The potential of the materials to undergo specific interactions with CO2 was measured by the isosteric heat adsorption. Further, we resynthesized zinc based IFPs, namely IFP-1 = Me), IFP-2 (R = Cl), IFP-3 (R = Br), and IFP-4 (R = Et), and cobalt based IFP-5 under MW-assisted conditions with higher yield. The transition from a nucleation phase to the pure crystalline material of IFP-1 in MW-assisted synthesis depends on reaction time. IFP-1, -3, and -5, which are synthesized by MW-assisted conditions, showed an enhancement of N-2 and CO2, compared to the analogous conventional electrical (CE) heating method based materials due to crystal defects.},
  language  = {en}
}