@book{Gronau2024, author = {Gronau, Norbert}, title = {Knowledge Modeling and Description Language (KMDL) 3.0}, publisher = {GITO mbH Verlag}, address = {Berlin}, isbn = {978-3-95545-416-6}, pages = {135}, year = {2024}, language = {en} } @inproceedings{PanzerGronau2024, author = {Panzer, Marcel and Gronau, Norbert}, title = {Enhancing economic efficiency in modular production systems through deep reinforcement learning}, series = {Procedia CIRP}, volume = {121}, booktitle = {Procedia CIRP}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2212-8271}, doi = {10.1016/j.procir.2023.09.229}, pages = {55 -- 60}, year = {2024}, abstract = {In times of increasingly complex production processes and volatile customer demands, the production adaptability is crucial for a company's profitability and competitiveness. The ability to cope with rapidly changing customer requirements and unexpected internal and external events guarantees robust and efficient production processes, requiring a dedicated control concept at the shop floor level. Yet in today's practice, conventional control approaches remain in use, which may not keep up with the dynamic behaviour due to their scenario-specific and rigid properties. To address this challenge, deep learning methods were increasingly deployed due to their optimization and scalability properties. However, these approaches were often tested in specific operational applications and focused on technical performance indicators such as order tardiness or total throughput. In this paper, we propose a deep reinforcement learning based production control to optimize combined techno-financial performance measures. Based on pre-defined manufacturing modules that are supplied and operated by multiple agents, positive effects were observed in terms of increased revenue and reduced penalties due to lower throughput times and fewer delayed products. The combined modular and multi-staged approach as well as the distributed decision-making further leverage scalability and transferability to other scenarios.}, language = {en} } @article{KlugeSchuefflerThimetal.2024, author = {Kluge, Annette and Sch{\"u}ffler, Arnulf S. and Thim, Christof and Gronau, Norbert}, title = {Facilitating and hindering factors for routine adaptations in manufacturing and effects on human performance- unexpected insights from three experimental studies in a special purpose setting}, series = {Ergonomics : an international journal of research and practice in human factors and ergonomics}, journal = {Ergonomics : an international journal of research and practice in human factors and ergonomics}, publisher = {Taylor \& Francis}, address = {London}, issn = {1366-5847}, doi = {10.1080/00140139.2024.2369706}, pages = {1 -- 19}, year = {2024}, abstract = {Consumer behaviour changes and strategic management decisions are driving adaptations in manufacturing routines. Based on the theory of situational strength, we investigated how contextual and person-related factors influence workers' adaptation in a two-worker position routine. Contextual factors, like retrieval cues (Study 1), time pressure (Study 2), and convenience (Study 3), were varied. Person-related factors included retentivity, general and routine-specific self-efficacy, and perceived adaptation costs. Dependent variables included various error types and production time before and after adaptation. In each study, 148 participants were trained in a production routine at t1 and executed an adapted routine at t2, one week later. Repeated measures ANOVA for performance at t1 and t2, and MANOVA for performance at t2, revealed that time increased for all groups at t2. For participants in Studies 1 \& 2, error rates remained consistent. Retentivity significantly impacted errors at both t1 and t2, emphasising that routine changes in a 'running business' take time, regardless of contextual factors. Workers with lower retentivity may require additional support.}, language = {en} } @inproceedings{AbendrothBenderGronau2024, author = {Abendroth, Adrian and Bender, Benedict and Gronau, Norbert}, title = {The evolution of original ERP customization}, series = {Proceedings of the 26th International Conference on Enterprise Information Systems}, volume = {1}, booktitle = {Proceedings of the 26th International Conference on Enterprise Information Systems}, publisher = {SCITEPRESS - Science and Technology Publications}, address = {Set{\´u}bal}, isbn = {978-989-758-692-7}, issn = {2184-4992}, doi = {10.5220/0012305500003690}, pages = {17 -- 27}, year = {2024}, abstract = {Enterprise Resource Planning (ERP) system customization is often necessary because companies have unique processes that provide their competitive advantage. Despite new technological advances such as cloud computing or model-driven development, technical ERP customization options are either outdated or ambiguously formulated in the scientific literature. Using a systematic literature review (SLR) that analyzes 137 definitions from 26 papers, the result is an analysis and aggregation of technical customization types by providing clearance and aligning with future organizational needs. The results show a shift from ERP code modification in on-premises systems to interface and integration customization in cloud ERP systems, as well as emerging technological opportunities as a way for customers and key users to perform system customization. The study contributes by providing a clear understanding of given customization types and assisting ERP users and vendors in making customization decisions.}, language = {en} } @inproceedings{RojahnGronau2024, author = {Rojahn, Marcel and Gronau, Norbert}, title = {Openness indicators for the evaluation of digital platforms between the launch and maturity phase}, series = {Proceedings of the 57th Annual Hawaii International Conference on System Sciences}, booktitle = {Proceedings of the 57th Annual Hawaii International Conference on System Sciences}, editor = {Bui, Tung X.}, publisher = {Department of IT Management Shidler College of Business University of Hawaii}, address = {Honolulu, HI}, isbn = {978-0-99813-317-1}, pages = {4516 -- 4525}, year = {2024}, abstract = {In recent years, the evaluation of digital platforms has become an important focus in the field of information systems science. The identification of influential indicators that drive changes in digital platforms, specifically those related to openness, is still an unresolved issue. This paper addresses the challenge of identifying measurable indicators and characterizing the transition from launch to maturity in digital platforms. It proposes a systematic analytical approach to identify relevant openness indicators for evaluation purposes. The main contributions of this study are the following (1) the development of a comprehensive procedure for analyzing indicators, (2) the categorization of indicators as evaluation metrics within a multidimensional grid-box model, (3) the selection and evaluation of relevant indicators, (4) the identification and assessment of digital platform architectures during the launch-to-maturity transition, and (5) the evaluation of the applicability of the conceptualization and design process for digital platform evaluation.}, language = {en} } @article{RolingGrumGronauetal.2024, author = {Roling, Wiebke M. and Grum, Marcus and Gronau, Norbert and Kluge, Annette}, title = {The roots of errors in adaptive performance}, series = {Journal of workplace learning}, volume = {36}, journal = {Journal of workplace learning}, number = {4}, publisher = {Emerald}, address = {Bradford}, issn = {1366-5626}, doi = {10.1108/JWL-10-2023-0168}, pages = {267 -- 281}, year = {2024}, abstract = {Purpose The purpose of this study was to investigate work-related adaptive performance from a longitudinal process perspective. This paper clustered specific behavioral patterns following the introduction of a change and related them to retentivity as an individual cognitive ability. In addition, this paper investigated whether the occurrence of adaptation errors varied depending on the type of change content. Design/methodology/approach Data from 35 participants collected in the simulated manufacturing environment of a Research and Application Center Industry 4.0 (RACI) were analyzed. The participants were required to learn and train a manufacturing process in the RACI and through an online training program. At a second measurement point in the RACI, specific manufacturing steps were subject to change and participants had to adapt their task execution. Adaptive performance was evaluated by counting the adaptation errors. Findings The participants showed one of the following behavioral patterns: (1) no adaptation errors, (2) few adaptation errors, (3) repeated adaptation errors regarding the same actions, or (4) many adaptation errors distributed over many different actions. The latter ones had a very low retentivity compared to the other groups. Most of the adaptation errors were made when new actions were added to the manufacturing process. Originality/value Our study adds empirical research on adaptive performance and its underlying processes. It contributes to a detailed understanding of different behaviors in change situations and derives implications for organizational change management.}, language = {en} } @article{GrumGronau2024, author = {Grum, Marcus and Gronau, Norbert}, title = {The impact of knowledge characteristics on process performance}, series = {Business process management journal}, volume = {30}, journal = {Business process management journal}, number = {4}, publisher = {Emerald}, address = {Bingley}, issn = {1463-7154}, doi = {10.1108/BPMJ-10-2023-0853}, pages = {1088 -- 1110}, year = {2024}, abstract = {Purpose With shorter product cycles and a growing number of knowledge-intensive business processes, time consumption is a highly relevant target factor in measuring the performance of contemporary business processes. This research aims to extend prior research on the effects of knowledge transfer velocity at the individual level by considering the effect of complexity, stickiness, competencies, and further demographic factors on knowledge-intensive business processes at the conversion-specific levels. Design/methodology/approach We empirically assess the impact of situation-dependent knowledge transfer velocities on time consumption in teams and individuals. Further, we issue the demographic effect on this relationship. We study a sample of 178 experiments of project teams and individuals applying ordinary least squares (OLS) for regression analysis-based modeling. Findings The authors find that time consumed at knowledge transfers is negatively associated with the complexity of tasks. Moreover, competence among team members has a complementary effect on this relationship and stickiness retards knowledge transfers. Thus, while demographic factors urgently need to be considered for effective and speedy knowledge transfers, these influencing factors should be addressed on a conversion-specific basis so that some tasks are realized in teams best while others are not. Guidelines and interventions are derived to identify best task realization variants, so that process performance is improved by a new kind of process improvement method. Research limitations/implications This study establishes empirically the importance of conversion-specific influence factors and demographic factors as drivers of high knowledge transfer velocities in teams and among individuals. The contribution connects the field of knowledge management to important streams in the wider business literature: process improvement, management of knowledge resources, design of information systems, etc. Whereas the model is highly bound to the experiment tasks, it has high explanatory power and high generalizability to other contexts. Practical implications Team managers should take care to allow the optimal knowledge transfer situation within the team. This is particularly important when knowledge sharing is central, e.g. in product development and consulting processes. If this is not possible, interventions should be applied to the individual knowledge transfer situation to improve knowledge transfers among team members. Social implications Faster and more effective knowledge transfers improve the performance of both commercial and non-commercial organizations. As nowadays, the individual is faced with time pressure to finalize tasks, the deliberated increase of knowledge transfer velocity is a core capability to realize this goal. Quantitative knowledge transfer models result in more reliable predictions about the duration of knowledge transfers. These allow the target-oriented modification of knowledge transfer situations so that processes speed up, private firms are more competitive and public services are faster to citizens. Originality/value Time consumption is an increasingly relevant factor in contemporary business but so far not been explored in experiments at all. This study extends current knowledge by considering quantitative effects on knowledge velocity and improved knowledge transfers.}, language = {en} } @article{BenderKorjahnGronau2024, author = {Bender, Benedict and Korjahn, Nicolas and Gronau, Norbert}, title = {Erfolgreich auf Handelsplattformen}, series = {ERP-Management : Auswahl, Einf{\"u}hrung und Betrieb von ERP-Systemen}, volume = {20}, journal = {ERP-Management : Auswahl, Einf{\"u}hrung und Betrieb von ERP-Systemen}, number = {1}, publisher = {GITO mbH - Verlag f{\"u}r Industrielle Informationstechnik und Organisation}, address = {Berlin}, issn = {1860-6725}, pages = {76 -- 82}, year = {2024}, abstract = {Obwohl Handelsplattformen zunehmend an Bedeutung gewinnen, besteht im deutschsprachigen Raum ein Mangel an umfassenden Markt{\"u}bersichten. Dadurch fehlt es Verk{\"a}ufern, potenziellen Plattformbetreibern und Kunden an einer soliden Grundlage f{\"u}r fundierte Entscheidungen. Das {\"a}ndern wir mit folgendem Beitrag. Erfahren Sie hier das Wichtigste {\"u}ber den rasant wachsenden Markt der Handelsplattformen.}, language = {de} } @article{RojahnWeberGronau2023, author = {Rojahn, Marcel and Weber, Edzard and Gronau, Norbert}, title = {Towards a standardization in scheduling models}, series = {International journal of industrial and systems engineering}, volume = {17}, journal = {International journal of industrial and systems engineering}, number = {6}, publisher = {Inderscience Enterprises}, address = {Gen{\`e}ve}, issn = {1748-5037}, pages = {401 -- 408}, year = {2023}, abstract = {Terminology is a critical instrument for each researcher. Different terminologies for the same research object may arise in different research communities. By this inconsistency, many synergistic effects get lost. Theories and models will be more understandable and reusable if a common terminology is applied. This paper examines the terminological (in)consistence for the research field of job-shop scheduling by a literature review. There is an enormous variety in the choice of terms and mathematical notation for the same concept. The comparability, reusability and combinability of scheduling methods is unnecessarily hampered by the arbitrary use of homonyms and synonyms. The acceptance in the community of used variables and notation forms is shown by means of a compliance quotient. This is proven by the evaluation of 240 scientific publications on planning methods.}, language = {en} } @article{TeichmannVladovaGronau2023, author = {Teichmann, Malte and Vladova, Gergana and Gronau, Norbert}, title = {Conception of subject-oriented learning}, series = {SSRN eLibrary / Social Science Research Network}, journal = {SSRN eLibrary / Social Science Research Network}, publisher = {Social Science Electronic Publ.}, address = {[Erscheinungsort nicht ermittelbar]}, issn = {1556-5068}, doi = {10.2139/ssrn.4457995}, pages = {6}, year = {2023}, abstract = {Competence development must change at all didactic levels to meet the new requirements triggered by digitization. Unlike classic learning theories and the resulting popular approaches (e.g., sender-receiver model), future-oriented vocational training must include new learning theory impulses in the discussion about competence acquisition. On the one hand, these impulses are often very well elaborated on the theoretical side, but the transfer into innovative learning environments - such as learning factories - is often still missing. On the other hand, actual learning factory (design) approaches often concentrate primarily on the technical side. Subject-oriented learning theory enables the design of competence development-oriented vocational training projectsin learning factories in which persons can obtain relevant competencies for digitization. At the same time, such learning theory approaches assume a potentially infinite number of learning interests and reasons. Following this, competence development is always located in an institutional or organizational context. The paper conceptionally answers how this theoryimmanent challenge is synthesizable with the reality of organizationally competence development requirements.}, language = {en} }