@inproceedings{GronauGrumBender2016, author = {Gronau, Norbert and Grum, Marcus and Bender, Benedict}, title = {Determining the optimal level of autonomy in cyber-physical production systems}, series = {IEEE 14th International Conference on Industrial Informatics (INDIN)}, booktitle = {IEEE 14th International Conference on Industrial Informatics (INDIN)}, publisher = {IEEE}, address = {New York}, doi = {10.1109/INDIN.2016.7819367}, pages = {1293 -- 1299}, year = {2016}, abstract = {Traditional production systems are enhanced by cyber-physical systems (CPS) and Internet of Things. A kind of next generation systems, those cyber-physical production systems (CPPS) are able to raise the level of autonomy of its production components. To find the optimal degree of autonomy in a given context, a research approach is formulated using a simulation concept. Based on requirements and assumptions, a cyber-physical market is modeled and qualitative hypotheses are formulated, which will be verified with the help of the CPPS of a hybrid simulation environment.}, language = {en} } @incollection{GronauWeberWanderetal.2022, author = {Gronau, Norbert and Weber, Edzard and Wander, Paul and Ullrich, Andr{\´e}}, title = {A regional remanufacturing network approach}, series = {Digitization of the work environment for sustainable production}, booktitle = {Digitization of the work environment for sustainable production}, editor = {Plapper, Peter}, publisher = {GITO Verlag}, address = {Berlin}, isbn = {978-3-95545-407-4}, doi = {10.30844/WGAB_2022_8}, pages = {145 -- 170}, year = {2022}, abstract = {Manufacturing companies still have relatively few points of contact with the circular economy. Especially, extending life time of whole products or parts via remanufacturing is an promising approach to reduce waste. However, necessary cost-efficient assessment of the condition of the individual parts is challenging and assessment procedures are technically complex (e.g., scanning and testing procedures). Furthermore, these assessment procedures are usually only available after the disassembly process has been completed. This is where conceptualization, data acquisition and simulation of remanufacturing processes can help. One major constraining aspect of remanufacturing is reducing logistic efforts, since these also have negative external effects on the environment. Thus regionalization is an additional but in the end consequential challenge for remanufacturing. This article aims to fill a gap by providing an regional remanufacturing approach, in particular the design of local remanufacturing chains. Thereby, further focus lies on modeling and simulating alternative courses of action, including feasibility study and eco-nomic assessment.}, language = {en} } @incollection{Gronau2021, author = {Gronau, Norbert}, title = {Modeling the handling of knowledge for Industry 4.0}, series = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, volume = {422}, booktitle = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, editor = {Shishkov, Boris}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-79975-5}, doi = {10.1007/978-3-030-79976-2_12}, pages = {207 -- 223}, year = {2021}, abstract = {Industry 4.0, i.e. the connection of cyber-physical systems via the Internet in production and logistics, leads to considerable changes in the socio-technical system of the factory. The effects range from a considerable need for further training, which is exacerbated by the current shortage of skilled workers, to an opening of the previously inaccessible boundaries of the factory to third-party access, an increasing merging of office IT and manufacturing IT, and a new understanding of what machines can do with their data. This results in new requirements for the modeling, analysis and design of information processing and performance mapping business processes. In the past, procedures were developed under the name of "process-oriented knowledge management" with which the exchange and use of knowledge in business processes could be represented, analyzed and improved. However, these approaches were limited to the office environment. A method that makes it possible to document, analyze and jointly optimize the new possibilities of knowledge processing by using artificial intelligence and machine learning in production and logistics in the same way and in a manner compatible with the approach in the office environment does not exist so far. The extension of the modeling language KMDL, which is described in this paper, will contribute to close this research gap. This paper describes first approaches for an analysis and design method for a knowledge management integrating man and machine in the age of Industry 4.0.}, language = {en} } @article{RojahnWeberGronau2023, author = {Rojahn, Marcel and Weber, Edzard and Gronau, Norbert}, title = {Towards a standardization in scheduling models}, series = {International journal of industrial and systems engineering}, volume = {17}, journal = {International journal of industrial and systems engineering}, number = {6}, publisher = {Inderscience Enterprises}, address = {Gen{\`e}ve}, issn = {1748-5037}, pages = {401 -- 408}, year = {2023}, abstract = {Terminology is a critical instrument for each researcher. Different terminologies for the same research object may arise in different research communities. By this inconsistency, many synergistic effects get lost. Theories and models will be more understandable and reusable if a common terminology is applied. This paper examines the terminological (in)consistence for the research field of job-shop scheduling by a literature review. There is an enormous variety in the choice of terms and mathematical notation for the same concept. The comparability, reusability and combinability of scheduling methods is unnecessarily hampered by the arbitrary use of homonyms and synonyms. The acceptance in the community of used variables and notation forms is shown by means of a compliance quotient. This is proven by the evaluation of 240 scientific publications on planning methods.}, language = {en} } @incollection{GrumKotarskiAmbrosetal.2021, author = {Grum, Marcus and Kotarski, David and Ambros, Maximilian and Biru, Tibebu and Krallmann, Hermann and Gronau, Norbert}, title = {Managing knowledge of intelligent systems}, series = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, volume = {422}, booktitle = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, editor = {Shishkov, Boris}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-79975-5}, doi = {10.1007/978-3-030-79976-2_5}, pages = {78 -- 96}, year = {2021}, abstract = {Since more and more business tasks are enabled by Artificial Intelligence (AI)-based techniques, the number of knowledge-intensive tasks increase as trivial tasks can be automated and non-trivial tasks demand human-machine interactions. With this, challenges regarding the management of knowledge workers and machines rise [9]. Furthermore, knowledge workers experience time pressure, which can lead to a decrease in output quality. Artificial Intelligence-based systems (AIS) have the potential to assist human workers in knowledge-intensive work. By providing a domain-specific language, contextual and situational awareness as well as their process embedding can be specified, which enables the management of human and AIS to ease knowledge transfer in a way that process time, cost and quality are improved significantly. This contribution outlines a framework to designing these systems and accounts for their implementation.}, language = {en} } @incollection{GrumGronau2021, author = {Grum, Marcus and Gronau, Norbert}, title = {Quantification of knowledge transfers}, series = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, volume = {422}, booktitle = {Business modeling and software design : 11th International Symposium, BMSD 2021, Sofia, Bulgaria, July 5-7, 2021, Proceedings}, editor = {Shishkov, Boris}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-030-79975-5}, doi = {10.1007/978-3-030-79976-2_13}, pages = {224 -- 242}, year = {2021}, abstract = {Faced with the triad of time-cost-quality, the realization of knowledge-intensive tasks at economic conditions is not trivial. Since the number of knowledge-intensive processes is increasing more and more nowadays, the efficient design of knowledge transfers at business processes as well as the target-oriented improvement of them is essential, so that process outcomes satisfy high quality criteria and economic requirements. This particularly challenges knowledge management, aiming for the assignment of ideal manifestations of influence factors on knowledge transfers to a certain task. Faced with first attempts of knowledge transfer-based process improvements [1], this paper continues research about the quantitative examination of knowledge transfers and presents a ready-to-go experiment design that is able to examine quality of knowledge transfers empirically and is suitable to examine knowledge transfers on a quantitative level. Its use is proven by the example of four influence factors, which namely are stickiness, complexity, competence and time pressure.}, language = {en} } @incollection{Gronau2022, author = {Gronau, Norbert}, title = {Errors in the process of modeling business processes}, series = {Business modeling and software design : 12th International Symposium, BMSD 2022, Fribourg, Switzerland, June 27-29, 2022, proceedings}, volume = {453}, booktitle = {Business modeling and software design : 12th International Symposium, BMSD 2022, Fribourg, Switzerland, June 27-29, 2022, proceedings}, editor = {Shishkov, Boris}, publisher = {Springer International Publishing}, address = {Cham}, isbn = {978-3-031-11509-7}, doi = {10.1007/978-3-031-11510-3_13}, pages = {221 -- 229}, year = {2022}, abstract = {Process models are the basic ingredient for many attempts to improve business processes. The graphical depiction of otherwise not observable behavior in an enterprise is one of the most important techniques in the digital society. They help to enable decision making in the design of processes and workflows. Nevertheless it is not easy to correctly model business processes. Some approaches try to detect errors by an automated analysis of the process model. This contribution focuses on the creation of the first model from scratch. Which errors occur most frequently and how can these be avoided?}, language = {en} } @incollection{LangemeyerGronauSchmidWalzetal.2021, author = {Langemeyer, Ines and Gronau, Norbert and Schmid-Walz, Sabrina and Kotarski, David and Reimann, Daniela and Teichmann, Malte}, title = {From employee to expert}, series = {2021 Crossing Boundaries Muttenz/Basel and Bern : 4th International VET Conference Crossing Boundaries 8 to 9 April 2021, online, Muttenz and Bern, Switzerland}, booktitle = {2021 Crossing Boundaries Muttenz/Basel and Bern : 4th International VET Conference Crossing Boundaries 8 to 9 April 2021, online, Muttenz and Bern, Switzerland}, doi = {10.5281/zenodo.4590196}, pages = {226 -- 231}, year = {2021}, abstract = {In the context of the collaborative project Ageing-appropriate, process-oriented and interactive further training in SME (API-KMU), innovative solutions for the challenges of demographic change and digitalisation are being developed for SMEs. To this end, an approach to age-appropriate training will be designed with the help of AR technology. In times of the corona pandemic, a special research design is necessary for the initial survey of the current state in the companies, which will be systematically elaborated in this paper. The results of the previous methodological considerations illustrate the necessity of a mix of methods to generate a deeper insight into the work processes. Video-based retrospective interviews seem to be a suitable instrument to adequately capture the employees' interpretative perspectives on their work activities. In conclusion, the paper identifies specific challenges, such as creating acceptance among employees, open questions, e.g., how a transfer or generalization of the results can succeed, and hypotheses that will have to be tested in the further course of the research process.}, language = {en} } @article{TeichmannVladovaGronau2023, author = {Teichmann, Malte and Vladova, Gergana and Gronau, Norbert}, title = {Conception of subject-oriented learning}, series = {SSRN eLibrary / Social Science Research Network}, journal = {SSRN eLibrary / Social Science Research Network}, publisher = {Social Science Electronic Publ.}, address = {[Erscheinungsort nicht ermittelbar]}, issn = {1556-5068}, doi = {10.2139/ssrn.4457995}, pages = {6}, year = {2023}, abstract = {Competence development must change at all didactic levels to meet the new requirements triggered by digitization. Unlike classic learning theories and the resulting popular approaches (e.g., sender-receiver model), future-oriented vocational training must include new learning theory impulses in the discussion about competence acquisition. On the one hand, these impulses are often very well elaborated on the theoretical side, but the transfer into innovative learning environments - such as learning factories - is often still missing. On the other hand, actual learning factory (design) approaches often concentrate primarily on the technical side. Subject-oriented learning theory enables the design of competence development-oriented vocational training projectsin learning factories in which persons can obtain relevant competencies for digitization. At the same time, such learning theory approaches assume a potentially infinite number of learning interests and reasons. Following this, competence development is always located in an institutional or organizational context. The paper conceptionally answers how this theoryimmanent challenge is synthesizable with the reality of organizationally competence development requirements.}, language = {en} } @incollection{GronauTeichmannWeber2023, author = {Gronau, Norbert and Teichmann, Malte and Weber, Edzard}, title = {Serious game-based haptic modeling}, series = {Business modeling and software design}, booktitle = {Business modeling and software design}, editor = {Shishkov, Boris}, publisher = {Springer Nature}, address = {Cham}, isbn = {978-3-031-36756-4}, doi = {10.1007/978-3-031-36757-1_3}, pages = {32 -- 55}, year = {2023}, abstract = {The authors propose that while tacit knowledge is a valuable resource for developing new business models, its externalization presents several challenges. One major challenge is that individuals often don't recognize their tacit knowledge resources, while another is the reluctance to share one's knowledge with others. Addressing these challenges, the authors present an application-oriented serious game-based haptic modeling approach for externalize tacit knowledge, which can be used to develop the first versions of business models based on tacit knowledge. Both conceptual and practical design fundamentals are presented based on elaborated theoretical approaches, which were developed with the help of a design science approach. The development of the research process is presented step by step, whereby we focused on the high accessibility of the presented research. Practitioners are presented with guidelines for implementing their serious game projects. Scientists benefit from starting points for their research topics of externalization, internalization, and socialization of tacit knowledge, development of business models, and serious games or gamification. The paper concludes with open research desiderata and questions from the presented research process.}, language = {en} }