@article{GronauUslar2004,
  author    = {Gronau, Norbert and Uslar, Mathias},
  title     = {Requirements and Recommenders for skill management},
  year      = {2004},
  abstract  = {Knowledge is more and more a key factor within companies [10]. Nearly 40 percent of all employees are so called 'knowledge workers'. Distribution and inquest of knowledge within companies are supported by skill management systems. Although not all aspects and potentials of this instrument are yet utilized skill management systems have spread widely within business organizations. This paper summarizes the requirements, scopes and problems for skill management system within the company.},
  language  = {en}
}
@book{Gronau2004,
  author    = {Gronau, Norbert},
  title     = {Enterprise Resource Planning und Supply Chain Management : Architektur und Funktionen},
  series = {Lehrb{\"u}cher Wirtschaftsinformatik},
  journal   = {Lehrb{\"u}cher Wirtschaftsinformatik},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen},
  isbn      = {3-486-27265-9},
  doi       = {10.1524/9783486593266},
  pages     = {314 S.},
  year      = {2004},
  language  = {de}
}
@article{GronauMuellerUslar2004,
  author    = {Gronau, Norbert and M{\"u}ller, Claudia and Uslar, Mathias},
  title     = {The KMDL Knowledge Management Approach : integrating knowledge conversations and business process modeling},
  isbn      = {3-540-24088-8},
  year      = {2004},
  abstract  = {This paper shows the KMDL Knowledge Management Approach which is based on the SECI and ba model by Nonaka and Takeuchi and the KMDL Knowledge modeling language. The approach illustrates the creation of knowledge with the focus on the knowledge conversions by Nonaka and Takeuchi. Furthermore, it emphasizes the quality of knowledge being embodied in persons and creates a personalization and socialization strategy which integrates business process modeling, skill management and the selection of knowledge management systems. The paper describes the theoretical foundations of the approach and practical effects which have been seen in the use of this approach.},
  language  = {en}
}
@article{GronauMuellerUslar2004,
  author    = {Gronau, Norbert and M{\"u}ller, Claudia and Uslar, Mathias},
  title     = {Skill-Management : Anwendungsgebiete und Erfahrungen},
  year      = {2004},
  abstract  = {In Organisationen mit mehreren hundert oder mehr Mitarbeitern ist es kaum m{\"o}glich, einen {\"U}berblick {\"u}ber die Kompetenzen und Spezialkenntnisse von Besch{\"a}ftigten zu behalten. Die Suche nach Fachleuten gestaltet sich dann oft schwierig, zum Beispiel wenn ein Projektteam zusammengestellt werden soll. Hilfe versprechen Skill- Management-Systeme, vorausgesetzt, ihre Datenbank wurde sinnvoll eingerichtet und wird laufend aktualisiert. Die Autoren beschreiben Aufbau und Struktur derartiger Systeme, fragen nach ihren kosten und nennen Kriterien f{\"u}r professionelle L{\"o}sungen.},
  language  = {de}
}
@article{GronauUslar2004,
  author    = {Gronau, Norbert and Uslar, Mathias},
  title     = {Creating Skill Catalogues for Competency Management Systems with KMDL},
  year      = {2004},
  abstract  = {The efficient use of human capital is one of the most important factors in todays' business competition. Competition is strongly influenced by qualified staff. In order to aid the human resources department to keep up with strategic decisions various competency management systems have been created that make the development of human resources easier and more precise. Competency management systems are only as good as the information that they are based on. The mostly used basic information is the skill catalogue. But there are nearly no applicable methods yet to create such a catalogue thoroughly. This paper introduces a reasonable approach to create such a catalogue with the description language for knowledge-intensive processes KMDL.},
  language  = {en}
}
@article{GronauWeber2004,
  author    = {Gronau, Norbert and Weber, Edzard},
  title     = {Modeling of knowledge intensive business processes with the declaration language KMDL},
  year      = {2004},
  abstract  = {The Knowledge Modeler Description Language KMDL is able to represent the creation, use and necessity of knowledge along common business processes. So KMDL can be used to formalize knowledge-intensive processes with a focus on certain knowledge-specific characteristics and to identify weak points in these processes. For a computer-aided modeling and analyzing the tool K-Modeler is introduced.},
  language  = {en}
}
@article{GronauWildemannZaeh2004,
  author    = {Gronau, Norbert and Wildemann, H. and Z{\"a}h, M. f},
  title     = {Entwicklung und Betrieb wandlungsf{\"a}higer Auftragsabwicklungssysteme},
  year      = {2004},
  language  = {de}
}
@book{GronauGaebler2009,
  author    = {Gronau, Norbert and G{\"a}bler, Andreas},
  title     = {Einf{\"u}hrung in die Wirtschaftsinformatik : Band 2},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {978-3-940019-63-9},
  pages     = {252 S. : graph. Darst.},
  year      = {2009},
  abstract  = {Dieses Buch bietet eine Einfuehrung in die Wirtschaftsinformatik in kommentierter Form. Es richtet sich in erster Linie an Studierende der Betriebswirtschaftslehre und der Wirtschaftsinformatik. Zu Beginn dieses Bandes wird eine Einfuehrung in die Funktionalitaet einer Oracle-Datenbank am Beispiel der Version Oracle 10g XE als frei verfuegbare Version des relationalen Datenbanksystems Oracle 10g gegeben. Der thematische Schwerpunkt im Band 2, die Datenbankabfragesprache SQL, baut auf dem Teil der Datenmodellierung des Bandes 1 auf. Zum besseren Verstaendnis der Zusammenhaenge ist ein durchgehend verwendbares Beispiel gewaehlt worden. An Hand dieses Beispiels werden sowohl Begriffe als auch Zusammenhaenge in der Umsetzung vom relationalen Datenmodell zur Datenbank erlaeutert. Im Deteil werden sowohl Syntax als auch Semantik der Datenbeschreibungssprache SQL erlaeutert.},
  language  = {de}
}
@article{GronauRegerAdelhelmetal.2009,
  author    = {Gronau, Norbert and Reger, Guido and Adelhelm, Silvia and Bahrs, Julian and Vladova, Gergana},
  title     = {Planung und Steuerung von offenen Innovationsprozessen in Life Sciences KMUs : Pro und Contra des Know-how- Transfers {\"u}ber die Unternehmensgrenzen},
  issn      = {1434-1890},
  year      = {2009},
  language  = {de}
}
@article{GronauSteinEggertetal.2008,
  author    = {Gronau, Norbert and Stein, Maureen and Eggert, Sandy and L{\"a}mmer, Anne},
  title     = {Integration {\"o}ffentlicher Anwendungslandschaften},
  year      = {2008},
  language  = {de}
}
@article{LaemmerEggertGronau2008,
  author    = {L{\"a}mmer, Anne and Eggert, Sandy and Gronau, Norbert},
  title     = {A procedure model for a SoA-based integration of enterprise systems},
  issn      = {1548-1115},
  year      = {2008},
  language  = {en}
}
@article{GronauBahrsPeters2008,
  author    = {Gronau, Norbert and Bahrs, Julian and Peters, Kirstin},
  title     = {Selbstlernende Suchmaschine als zentraler Informationszugang im Unternehmen},
  issn      = {1434-1980},
  year      = {2008},
  language  = {de}
}
@article{EggertGronau2009,
  author    = {Eggert, Sandy and Gronau, Norbert},
  title     = {Modellbasierte Auswahl von ERP-Systemen},
  issn      = {0931-9077},
  year      = {2009},
  language  = {de}
}
@article{Gronau2008,
  author    = {Gronau, Norbert},
  title     = {Der Wettbewerb "ERP-System des Jahres 2007" : Verfahren und Ergebnisse},
  issn      = {1860-6725},
  year      = {2008},
  language  = {de}
}
@article{Gronau2009,
  author    = {Gronau, Norbert},
  title     = {Der Wettbewerb zum ERP-System des Jahres 2008 : Verfahren und Ergebnisse},
  issn      = {1860-6725},
  year      = {2009},
  language  = {de}
}
@article{BrockmannGronauSultanow2008,
  author    = {Brockmann, Carsten and Gronau, Norbert and Sultanow, Eldar},
  title     = {ERP und MES : Teil 3},
  issn      = {1617-948X},
  year      = {2008},
  language  = {de}
}
@article{EggertGronau2008,
  author    = {Eggert, Sandy and Gronau, Norbert},
  title     = {Erh{\"o}hung der Wandlungsf{\"a}higkeit von ECM-L{\"o}sungen unter Verwendung kartographischer Gestaltungsmittel},
  isbn      = {978-3-940019-34-9},
  year      = {2008},
  language  = {de}
}
@article{AndresenGronau2009,
  author    = {Andresen, Katja and Gronau, Norbert},
  title     = {Adjustment strategies for managing unanticipated changes in software development processes},
  isbn      = {978-3-85403-246-5},
  year      = {2009},
  language  = {en}
}
@article{GronauSielaffRoechertVoigtetal.2009,
  author    = {Gronau, Norbert and Sielaff, S and R{\"o}chert-Voigt, Tanja and Stein, Maureen and Weber, Edzard},
  title     = {Change capability of protection systems},
  isbn      = {978-1-8456-4202-0},
  year      = {2009},
  language  = {en}
}
@book{AdelhelmBraunGronauetal.2010,
  author    = {Adelhelm, Silvia and Braun, Andreas and Gronau, Norbert and M{\"u}ller, E. and Vladova, Gergana},
  title     = {Open Innovation : Methodologische Pr{\"a}zisierung und praktische Umsetzung im Projekt Open Innovation in Life Sciences},
  isbn      = {978-3-8396-0141-9},
  year      = {2010},
  language  = {de}
}
@article{GronauBahrs2008,
  author    = {Gronau, Norbert and Bahrs, Julian},
  title     = {Zentraler Informationszugang im Unternehmen : selbstlernende Suchmaschine f{\"u}r profil- und kontextorientierte Suche},
  isbn      = {978-3-940019-49-3},
  year      = {2008},
  language  = {de}
}
@article{BahrsGronau2008,
  author    = {Bahrs, Julian and Gronau, Norbert},
  title     = {Ungenutzte Potenziale im Wissensmanagement : Stand der Praxis},
  issn      = {1438-4426},
  year      = {2008},
  language  = {de}
}
@article{WeberSteinGronau2009,
  author    = {Weber, Edzard and Stein, Maureen and Gronau, Norbert},
  title     = {Demokratieorientierte eGovernment-Systeme},
  issn      = {1436 - 3011},
  year      = {2009},
  language  = {de}
}
@book{Gronau2010,
  author    = {Gronau, Norbert},
  title     = {Enterprise Resource Planning : Architektur, Funktionen und Managment von ERP-Systemen},
  series = {Lehrb{\"u}cher Wirtschaftsinformatik},
  journal   = {Lehrb{\"u}cher Wirtschaftsinformatik},
  publisher = {Oldenbourg},
  address   = {M{\"u}nchen},
  isbn      = {978-3-486-59050-0},
  pages     = {314 S.},
  year      = {2010},
  language  = {de}
}
@book{GronauLindemann2010,
  author    = {Gronau, Norbert and Lindemann, Marcus},
  title     = {Einf{\"u}hrung in das Produktionsmanagment},
  series = {Skripte zur Wirtschaftsinformatik},
  journal   = {Skripte zur Wirtschaftsinformatik},
  publisher = {Gito-Verl.},
  address   = {Berlin},
  isbn      = {978-3-942183-10-9},
  pages     = {272 S.},
  year      = {2010},
  language  = {de}
}
@article{GronauFroemingSchmidetal.2007,
  author    = {Gronau, Norbert and Fr{\"o}ming, Jane and Schmid, Simone and R{\"u}ssb{\"u}ldt, Uwe},
  title     = {Approach for requirement oriented team building in industrial processes},
  doi       = {10.1016/j.compind.2006.09.011},
  year      = {2007},
  abstract  = {This contribution presents an approach for requirement oriented team building in industrial processes like product development. This will be based on the knowledge modelling and description language (KMDL(R)) that enables the modelling and analysis of knowledge intensive business processes. First the basic elements of the modelling technique are described, presenting the concept and the description language. Furthermore it is shown how the KMDL(R) process models can be used as a basis for the team building component. Therefore, an algorithm was developed that is able to propose a team composition for a specific task by analyzing the knowledge and skills of the employees, which will be contrasted to the process requirements. This can be used as guidance for team building decisions.},
  language  = {en}
}
@article{GronauFroeming2006,
  author    = {Gronau, Norbert and Fr{\"o}ming, Jane},
  title     = {KMDL : eine semiformale Beschreibungssprache zur Modellierung von Wissenskonversionen},
  issn      = {0937-6429},
  doi       = {10.1007/s11576-006-0080-4},
  year      = {2006},
  language  = {de}
}
@book{GronauGaebler2012,
  author    = {Gronau, Norbert and G{\"a}bler, Andreas},
  title     = {Einf{\"u}hrung in die Wirtschaftsinformatik : Bd. 1},
  series = {Skripte zur Wirtschaftsinformatik},
  journal   = {Skripte zur Wirtschaftsinformatik},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {978-3-942183-89-5},
  pages     = {311 S.},
  year      = {2012},
  language  = {de}
}
@article{Gronau2009,
  author    = {Gronau, Norbert},
  title     = {Mobility creates process proximity},
  issn      = {1434-2308},
  year      = {2009},
  language  = {en}
}
@misc{BenderGrumGronauetal.2019,
  author    = {Bender, Benedict and Grum, Marcus and Gronau, Norbert and Alfa, Attahiru and Maharaj, B. T.},
  title     = {Design of a worldwide simulation system for distributed cyber-physical production networks},
  series = {2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC)},
  journal   = {2019 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC)},
  publisher = {IEEE},
  address   = {New York},
  isbn      = {978-1-7281-3401-7},
  issn      = {2334-315X},
  doi       = {10.1109/ICE.2019.8792609},
  pages     = {7},
  year      = {2019},
  abstract  = {Modern production infrastructures of globally operating companies usually consist of multiple distributed production sites. While the organization of individual sites consisting of Industry 4.0 components itself is demanding, new questions regarding the organization and allocation of resources emerge considering the total production network. In an attempt to face the challenge of efficient distribution and processing both within and across sites, we aim to provide a hybrid simulation approach as a first step towards optimization. Using hybrid simulation allows us to include real and simulated concepts and thereby benchmark different approaches with reasonable effort. A simulation concept is conceptualized and demonstrated qualitatively using a global multi-site example.},
  language  = {en}
}
@article{Gronau2019,
  author    = {Gronau, Norbert},
  title     = {Determining the appropriate degree of autonomy in cyber-physical production systems},
  series = {CIRP Journal of Manufacturing Science and Technology},
  volume    = {26},
  journal   = {CIRP Journal of Manufacturing Science and Technology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1755-5817},
  doi       = {10.1016/j.cirpj.2019.05.001},
  pages     = {70 -- 80},
  year      = {2019},
  abstract  = {Existing factories face multiple problems due to their hierarchical structure of decision making and control. Cyber-physical systems principally allow to increase the degree of autonomy to new heights. But which degree of autonomy is really useful and beneficiary? This paper differentiates diverse definitions of autonomy and approaches to determine them. Some experimental findings in a lab environment help to answer the question raised in this paper.},
  language  = {en}
}
@book{GronauGaebler2019,
  author    = {Gronau, Norbert and G{\"a}bler, Andreas},
  title     = {Einf{\"u}hrung in die Wirtschaftsinformatik : Band 1},
  series = {Skripte zur Wirtschafsinformatik},
  journal   = {Skripte zur Wirtschafsinformatik},
  edition   = {8. durchgesehene Auflage},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {978-3-95545-279-7},
  pages     = {230},
  year      = {2019},
  abstract  = {Dieses Buch bietet eine Einf{\"u}hrung in die Wirtschaftsinformatik in kommentierter Form. Es richtet sich in erster Linie an Studierende der Betriebswirtschaftslehre und der Wirtschaftsinformatik. Band 1 beinhaltet eine Betrachtung der nachfolgenden Themenpunkte: Der erste Abschnitt gibt eine Einf{\"u}hrung in die Bedeutung der Wirtschaftsinformatik als Wissenschaftsfach und damit verbunden in ihre praktische Anwendungsorientierung. Der folgende Abschnitt liefert einen {\"U}berblick {\"u}ber die der Informatik zugrunde liegenden Konzepte und Techniken von Computer-Hardware und -Software sowie Begriffsbestimmungen und Beschreibungsmerkmale der Daten, Datenhaltung und -speicherung. Ein weiterer Abschnitt ist dem Komplex Netzwerke und Internet gewidmet. In kompakter Form werden Grundlagen der Netze und Netzwerkdienste erkl{\"a}rt. Das Thema Datenmodellierung bildet den Schwerpunkt dieses Bandes. Die Vorgehensweise zur Erstellung und Bearbeitung von Modellen wird in sehr ausf{\"u}hrlicher Form dargelegt. Den Abschluss bildet die Verbindung zwischen Datenbanken und betrieblichen Anwedungssystemen.},
  language  = {de}
}
@misc{BeierleBerndtGronauetal.2019,
  author    = {Beierle, Christoph and Berndt, Jan Ole and Gronau, Norbert and Timm, Ingo J.},
  title     = {Intentional Forgetting: A Huge Potential for Organizations},
  series = {K{\"u}nstliche Intelligenz},
  volume    = {33},
  journal   = {K{\"u}nstliche Intelligenz},
  number    = {1},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {0933-1875},
  doi       = {10.1007/s13218-018-00573-y},
  pages     = {85 -- 87},
  year      = {2019},
  language  = {en}
}
@book{GronauGaebler2019,
  author    = {Gronau, Norbert and G{\"a}bler, Andreas},
  title     = {Einf{\"u}hrung in die Wirtschaftsinformatik : Band 2},
  series = {Skripte zur Wirtschaftsinformatik},
  journal   = {Skripte zur Wirtschaftsinformatik},
  edition   = {8. durchgesehene Auflage},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {978-3-9554528-5-8},
  pages     = {300},
  year      = {2019},
  abstract  = {Dieses Buch bietet eine Einf{\"u}hrung in die Wirtschaftsinformatik in kommentierter Form. Es richtet sich in erster Linie an Studierende der Betriebswirtschaftslehre und der Wirtschaftsinformatik. Zu Beginn dieses Bandes wird eine Einf{\"u}hrung in die Funktionalit{\"a}t einer Oracle-Datenbank am Beispiel der Version Oracle 10g XE als frei verf{\"u}gbare Version des relationalen Datenbanksystems Oracle 10g gegeben. Der thematische Schwerpunkt im Band 2, die Datenbankabfragesprache SQL, baut auf dem Teil der Datenmodellierung des Bandes 1 auf. Zum besseren Verst{\"a}ndnis der Zusammenh{\"a}nge ist ein durchgehend verwendbares Beispiel gew{\"a}hlt worden. An Hand dieses Beispiels werden sowohl Begriffe als auch Zusammenh{\"a}nge in der Umsetzung vom relationalen Datenmodell zur Datenbank erl{\"a}utert. Im Detail werden sowohl Syntax als auch Semantik der Datenbeschreibungssprache SQL erl{\"a}utert.},
  language  = {de}
}
@misc{VladovaUllrichBenderetal.2021,
  author    = {Vladova, Gergana and Ullrich, Andr{\´e} and Bender, Benedict and Gronau, Norbert},
  title     = {Students' Acceptance of Technology-Mediated Teaching - How It Was Influenced During the COVID-19 Pandemic in 2020: A Study From Germany},
  series = {Postprints der Universit{\"a}t Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Wirtschafts- und Sozialwissenschaftliche Reihe},
  issn      = {1867-5808},
  doi       = {10.25932/publishup-52161},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-521615},
  pages     = {17},
  year      = {2021},
  abstract  = {In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring-summer 2020 semester. Our study focused on (1) the students' acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study's results and derive short- and long-term implications for science and practice.},
  language  = {en}
}
@article{VladovaUllrichBenderetal.2021,
  author    = {Vladova, Gergana and Ullrich, Andr{\´e} and Bender, Benedict and Gronau, Norbert},
  title     = {Students' acceptance of technology-mediated teaching - How it was influenced during the COVID-19 Pandemic in 2020},
  series = {Frontiers in psychology / Frontiers Research Foundation},
  volume    = {12},
  journal   = {Frontiers in psychology / Frontiers Research Foundation},
  publisher = {Frontiers Research Foundation},
  address   = {Lausanne},
  issn      = {1664-1078},
  doi       = {10.3389/fpsyg.2021.636086},
  pages     = {15},
  year      = {2021},
  abstract  = {In response to the impending spread of COVID-19, universities worldwide abruptly stopped face-to-face teaching and switched to technology-mediated teaching. As a result, the use of technology in the learning processes of students of different disciplines became essential and the only way to teach, communicate and collaborate for months. In this crisis context, we conducted a longitudinal study in four German universities, in which we collected a total of 875 responses from students of information systems and music and arts at four points in time during the spring-summer 2020 semester. Our study focused on (1) the students' acceptance of technology-mediated learning, (2) any change in this acceptance during the semester and (3) the differences in acceptance between the two disciplines. We applied the Technology Acceptance Model and were able to validate it for the extreme situation of the COVID-19 pandemic. We extended the model with three new variables (time flexibility, learning flexibility and social isolation) that influenced the construct of perceived usefulness. Furthermore, we detected differences between the disciplines and over time. In this paper, we present and discuss our study's results and derive short- and long-term implications for science and practice.},
  language  = {en}
}
@misc{UllrichEnkeTeichmannetal.2019,
  author    = {Ullrich, Andre and Enke, Judith and Teichmann, Malte and Kress, Antonio and Gronau, Norbert},
  title     = {Audit - and then what?},
  series = {Procedia Manufacturing},
  volume    = {31},
  journal   = {Procedia Manufacturing},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2351-9789},
  doi       = {10.1016/j.promfg.2019.03.025},
  pages     = {162 -- 168},
  year      = {2019},
  abstract  = {Current trends such as digital transformation, Internet of Things, or Industry 4.0 are challenging the majority of learning factories. Regardless of whether a conventional learning factory, a model factory, or a digital learning factory, traditional approaches such as the monotonous execution of specific instructions don't suffice the learner's needs, market requirements as well as especially current technological developments. Contemporary teaching environments need a clear strategy, a road to follow for being able to successfully cope with the changes and develop towards digitized learning factories. This demand driven necessity of transformation leads to another obstacle: Assessing the status quo and developing and implementing adequate action plans. Within this paper, details of a maturity-based audit of the hybrid learning factory in the Research and Application Centre Industry 4.0 and a thereof derived roadmap for the digitization of a learning factory are presented.},
  language  = {en}
}
@article{GrumBenderAlfaetal.2018,
  author    = {Grum, Marcus and Bender, Benedict and Alfa, A. S. and Gronau, Norbert},
  title     = {A decision maxim for efficient task realization within analytical network infrastructures},
  series = {Decision support systems : DSS ; the international journal},
  volume    = {112},
  journal   = {Decision support systems : DSS ; the international journal},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-9236},
  doi       = {10.1016/j.dss.2018.06.005},
  pages     = {48 -- 59},
  year      = {2018},
  abstract  = {Faced with the increasing needs of companies, optimal dimensioning of IT hardware is becoming challenging for decision makers. In terms of analytical infrastructures, a highly evolutionary environment causes volatile, time dependent workloads in its components, and intelligent, flexible task distribution between local systems and cloud services is attractive. With the aim of developing a flexible and efficient design for analytical infrastructures, this paper proposes a flexible architecture model, which allocates tasks following a machine-specific decision heuristic. A simulation benchmarks this system with existing strategies and identifies the new decision maxim as superior in a first scenario-based simulation.},
  language  = {en}
}
@misc{TeichmannUllrichGronau2019,
  author    = {Teichmann, Malte and Ullrich, Andre and Gronau, Norbert},
  title     = {Subject-oriented learning},
  series = {Procedia Manufacturing},
  volume    = {31},
  journal   = {Procedia Manufacturing},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {2351-9789},
  doi       = {10.1016/j.promfg.2019.03.012},
  pages     = {72 -- 78},
  year      = {2019},
  abstract  = {The transformation to a digitized company changes not only the work but also social context for the employees and requires inter alia new knowledge and skills from them. Additionally, individual action problems arise. This contribution proposes the subject-oriented learning theory, in which the employees´ action problems are the starting point of training activities in learning factories. In this contribution, the subject-oriented learning theory is exemplified and respective advantages for vocational training in learning factories are pointed out both theoretically and practically. Thereby, especially the individual action problems of learners and the infrastructure are emphasized as starting point for learning processes and competence development.},
  language  = {en}
}
@article{GronauSchaefer2021,
  author    = {Gronau, Norbert and Schaefer, Martin},
  title     = {Why metadata matters for the future of copyright},
  series = {European Intellectual Property Review},
  volume    = {43},
  journal   = {European Intellectual Property Review},
  number    = {8},
  publisher = {Sweet \& Maxwell},
  address   = {London},
  issn      = {0142-0461},
  pages     = {488 -- 494},
  year      = {2021},
  abstract  = {In the copyright industries of the 21st century, metadata is the grease required to make the engine of copyright run smoothly and powerfully for the benefit of creators, copyright industries and users alike. However, metadata is difficult to acquire and even more difficult to keep up to date as the rights in content are mostly multi-layered, fragmented, international and volatile. This article explores the idea of a neutral metadata search and enhancement tool that could constitute a buffer to safeguard the interests of the various proprietary database owners and avoid the shortcomings of centralised databases.},
  language  = {en}
}
@book{Gronau2022,
  author    = {Gronau, Norbert},
  title     = {Gesch{\"a}ftsprozessmanagement in Wirtschaft und Verwaltung},
  edition   = {3. Aufl.},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {978-3-95545-399-2},
  pages     = {x, 383},
  year      = {2022},
  abstract  = {Dieses Standardwerk zu Geschäftsprozessmanagement in Wirtschaft und Verwaltung gibt gleichzeitig einen Überblick {\"u}ber den aktuellen Stand der Forschung zu diesem Thema und f{\"u}hrt Interessierte wie Studierende oder Praktiker in das Thema und seine Facetten ein. Aktuelle Entwicklungen wie Robotic Process Automation und Process Mining werden aufgegriffen. Im Mittelpunkt stehen die drei wesentlichen GPM- Blickwinkel Technik, Organisation und Mensch. Aus Sicht der Forschung werden innovative Methoden zur Modellierung und Analyse von Geschäftsprozessen beschrieben. Aus Sicht der Lehre dient das Buch als Einstiegslekt{\"u}re und liefert Ansatzpunkte f{\"u}r die vertiefte Befassung mit einzelnen Aspekten des Geschäftsprozessmanagements. F{\"u}r die Praxis beschreibt dieses Werk die dort bestehenden konzeptionellen und methodischen Hindernisse des Prozessmanagements und zeigt Wege zur Überwindung dieser Hindernisse. Die vorliegende Auflage wurde vollständig {\"u}berarbeitet und stark erweitert, u. a. mit neuen Kapiteln zu Software f{\"u}r das Geschäftsprozessmanagement und zum Change Management.},
  language  = {de}
}
@inproceedings{RojahnGronau2023,
  author    = {Rojahn, Marcel and Gronau, Norbert},
  title     = {Digital platform concepts for manufacturing companies},
  series = {10th International Conference on Future Internet of Things and Cloud (FiCloud)},
  booktitle = {10th International Conference on Future Internet of Things and Cloud (FiCloud)},
  publisher = {IEEE},
  address   = {[Erscheinungsort nicht ermittelbar]},
  isbn      = {979-8-3503-1635-3},
  doi       = {10.1109/FiCloud58648.2023.00030},
  pages     = {149 -- 158},
  year      = {2023},
  abstract  = {Digital Platforms (DPs) has established themself in recent years as a central concept of the Information Technology Science. Due to the great diversity of digital platform concepts, clear definitions are still required. Furthermore, DPs are subject to dynamic changes from internal and external factors, which pose challenges for digital platform operators, developers and customers. Which current digital platform research directions should be taken to address these challenges remains open so far. The following paper aims to contribute to this by outlining a systematic literature review (SLR) on digital platform concepts in the context of the Industrial Internet of Things (IIoT) for manufacturing companies and provides a basis for (1) a selection of definitions of current digital platform and ecosystem concepts and (2) a selection of current digital platform research directions. These directions are diverted into (a) occurrence of digital platforms, (b) emergence of digital platforms, (c) evaluation of digital platforms, (d) development of digital platforms, and (e) selection of digital platforms.},
  language  = {en}
}
@incollection{VladovaGronauRuedian2019,
  author    = {Vladova, Gergana and Gronau, Norbert and R{\"u}dian, Sylvio Leo},
  title     = {Wissenstransfer in Bildung und Weiterbildung},
  series = {Digitale Transformation - gutes Arbeiten und Qualifizierung aktiv gestalten},
  booktitle = {Digitale Transformation - gutes Arbeiten und Qualifizierung aktiv gestalten},
  publisher = {Gito},
  address   = {Berlin},
  isbn      = {978-3-95545-309-1},
  pages     = {89 -- 106},
  year      = {2019},
  language  = {de}
}
@inproceedings{BenderGronau2022,
  author    = {Bender, Benedict and Gronau, Norbert},
  title     = {Introduction to the Minitrack on towards the future of enterprise systems},
  series = {Proceedings of the 55th Hawaii International Conference on System Sciences},
  booktitle = {Proceedings of the 55th Hawaii International Conference on System Sciences},
  editor    = {Bui, Tung},
  publisher = {Hawaii International Conference on System Sciences},
  address   = {Honolulu, HI},
  isbn      = {978-0-9981331-5-7},
  doi       = {10.24251/HICSS.2022.869},
  pages     = {7232 -- 7233},
  year      = {2022},
  abstract  = {Enterprise systems have long played an important role in businesses of various sizes. With the increasing complexity of today's business relationships, specialized application systems are being used more and more. Moreover, emerging technologies such as artificial intelligence are becoming accessible for enterprise systems. This raises the question of the future role of enterprise systems. This minitrack covers novel ideas that contribute to and shape the future role of enterprise systems with five contributions.},
  language  = {en}
}
@incollection{Gronau2022,
  author    = {Gronau, Norbert},
  title     = {K{\"u}nstliche Intelligenz in der Produktionssteuerung},
  series = {Handbuch Digitalisierung},
  booktitle = {Handbuch Digitalisierung},
  editor    = {Roth, Stefan and Corsten, Hans},
  publisher = {Verlag Franz Vahlen},
  address   = {M{\"u}nchen},
  isbn      = {978-3-8006-6562-4},
  pages     = {629 -- 650},
  year      = {2022},
  language  = {de}
}
@book{Gronau2021,
  author    = {Gronau, Norbert},
  title     = {ERP-Systeme},
  series = {De Gruyter Studium},
  journal   = {De Gruyter Studium},
  edition   = {4. Auflage},
  publisher = {De Gruyter Oldenbourg},
  address   = {Berlin ; Boston},
  isbn      = {978-3-11-066339-6},
  issn      = {2365-7197},
  doi       = {10.1515/9783110663396},
  pages     = {XIII, 372},
  year      = {2021},
  language  = {de}
}
@inproceedings{GrumBlunkRojahnetal.2020,
  author    = {Grum, Marcus and Blunk, Oliver and Rojahn, Marcel and Fettke, Peter and Gronau, Norbert},
  title     = {Research challenges of knowledge modelling and the outline of a research agenda},
  series = {Knowledge in digital age : IFKAD 2020},
  booktitle = {Knowledge in digital age : IFKAD 2020},
  publisher = {The Arts of Business Institute},
  address   = {Matera, Italy},
  isbn      = {978-88-96687-13-0},
  issn      = {2280-787X},
  year      = {2020},
  language  = {en}
}
@article{SchuefflerThimHaaseetal.2019,
  author    = {Sch{\"u}ffler, Arnulf and Thim, Christof and Haase, Jennifer and Gronau, Norbert and Kluge, Annette},
  title     = {Information processing in work environment 4.0 and the beneficial impact of intentional forgetting on change management},
  series = {Zeitschrift f{\"u}r Arbeits- und Organisationspsychologie : german journal of work and organizational psychology},
  volume    = {64},
  journal   = {Zeitschrift f{\"u}r Arbeits- und Organisationspsychologie : german journal of work and organizational psychology},
  number    = {1},
  publisher = {Hogrefe},
  address   = {G{\"o}ttingen},
  issn      = {0932-4089},
  doi       = {10.1026/0932-4089/a000307},
  pages     = {17 -- 29},
  year      = {2019},
  abstract  = {Industry 4.0, based on increasingly progressive digitalization, is a global phenomenon that affects every part of our work. The Internet of Things (IoT) is pushing the process of automation, culminating in the total autonomy of cyber-physical systems. This process is accompanied by a massive amount of data, information, and new dimensions of flexibility. As the amount of available data increases, their specific timeliness decreases. Mastering Industry 4.0 requires humans to master the new dimensions of information and to adapt to relevant ongoing changes. Intentional forgetting can make a difference in this context, as it discards nonprevailing information and actions in favor of prevailing ones. Intentional forgetting is the basis of any adaptation to change, as it ensures that nonprevailing memory items are not retrieved while prevailing ones are retained. This study presents a novel experimental approach that was introduced in a learning factory (the Research and Application Center Industry 4.0) to investigate intentional forgetting as it applies to production routines. In the first experiment (N = 18), in which the participants collectively performed 3046 routine related actions (t1 = 1402, t2 = 1644), the results showed that highly proceduralized actions were more difficult to forget than actions that were less well-learned. Additionally, we found that the quality of cues that trigger the execution of routine actions had no effect on the extent of intentional forgetting.},
  language  = {en}
}
@inproceedings{BenderGronauWinter2023,
  author    = {Bender, Benedict and Gronau, Norbert and Winter, Robert},
  title     = {Minitrack introduction enterprise-level information systems},
  series = {Proceedings of the 56th Hawaii International Conference on System Sciences},
  booktitle = {Proceedings of the 56th Hawaii International Conference on System Sciences},
  editor    = {Bui, Tung X.},
  publisher = {Hawaii International Conference on System Sciences},
  address   = {Honolulu, HI},
  isbn      = {978-0-9981331-6-4},
  issn      = {2572-6862},
  pages     = {5809 -- 5810},
  year      = {2023},
  abstract  = {While Information Systems (IS) Research on the individual and workgroup level of analysis is omnipresent, research on the enterprise-level IS is less frequent. Even though research on Enterprise Systems and their management is established in academic associations and conference programs, enterprise-level phenomena are underrepresented. This minitrack provides a forum to integrate existing research streams that traditionally needed to be attached to other topics (such as IS management or IS governance). The minitrack received broad attention. The three selected papers address different facets of the future role of enterprise-wide IS including aspects such as carbonization, ecosystem integration, and technology-organization fit.},
  language  = {en}
}
@article{ThimUllrichEigelshovenetal.2020,
  author    = {Thim, Christof and Ullrich, Andr{\´e} and Eigelshoven, Felix and Gronau, Norbert and Ritter, Ann-Carolin},
  title     = {Crowdsourcing bei industriellen Innovationen},
  series = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse},
  volume    = {36},
  journal   = {Industrie 4.0 Management : Gegenwart und Zukunft industrieller Gesch{\"a}ftsprozesse},
  number    = {6},
  publisher = {GITO mbH Verlag},
  address   = {Berlin},
  issn      = {2364-9208},
  doi       = {10.30844/I40M_20-6_S9-13},
  pages     = {9 -- 13},
  year      = {2020},
  abstract  = {Die Innovationst{\"a}tigkeit im industriellen Umfeld verlagert sich durch die Digitalisierung hin zu Produkt-Service-Systemen. Kleine und mittlere Unternehmen haben sich in ihrer Entwicklungst{\"a}tigkeit bisher stark auf die Produktentwicklung bezogen. Der Umstieg auf „smarte" Produkte und die Kopplung an Dienstleistungen erfordert h{\"a}ufig personelle und finanzielle Ressourcen, welche KMU nicht aufbringen k{\"o}nnen. Crowdsourcing stellt eine M{\"o}glichkeit dar, den Innovationsprozess f{\"u}r externe Akteure zu {\"o}ffnen und Kosten- sowie Geschwindigkeitsvorteile zu realisieren. Bei der Integration von Crowdsourcing-Elementen ist jedoch einigen Herausforderungen zu begegnen. Dieser Beitrag zeigt sowohl die Potenziale als auch die Barrieren einer Crowdsourcing-Nutzung im industriellen Umfeld auf.},
  language  = {de}
}