@article{BaiDongBruneetal.2018, author = {Bai, Yongliang and Dong, Dongdong and Brune, Sascha and Wu, Shiguo and Wang, Zhenjie}, title = {Crustal stretching style variations in the northern margin of the South China Sea}, series = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, volume = {751}, journal = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0040-1951}, doi = {10.1016/j.tecto.2018.12.012}, pages = {1 -- 12}, year = {2018}, abstract = {Linking deep seismic profiles with regional-scale gravity inversion is a powerful tool to deduce the architecture of rifted margins and their structural evolution. Here we map upper and lower crustal thicknesses of the northern South China Sea (SCS) margin in order to investigate the occurrence of depth-dependent crustal extension from the proximal to the distal margin. By comparing upper and lower crustal stretching factors, we find that the northern margin of the SCS is segmented in three parts: (1) sedimentary basins where upper crust is stretched more than lower crust, (2) distal margin where lower crust is stretched more than upper crust, (3) mostly proximal margin regions where the two layers have similar stretching factors. Our results suggest that sedimentary basins and distal margin prominently feature depth-dependent extension, however accommodated by different processes. While differential thinning within sedimentary basins appears to be governed by lateral pressure variations inducing lower crustal flow, we suggest the distal margin to be affected by a combination of mantle flow-induced lower crustal shearing and sequential fault activity during crustal hyper-extension.}, language = {en} } @article{BruneCortiRanalli2017, author = {Brune, Sascha and Corti, Giacomo and Ranalli, Giorgio}, title = {Controls of inherited lithospheric heterogeneity on rift linkage: Numerical and analog models of interaction between the Kenyan and Ethiopian rifts across the Turkana depression}, series = {Tectonics}, volume = {36}, journal = {Tectonics}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1002/2017TC004739}, pages = {1767 -- 1786}, year = {2017}, abstract = {Inherited rheological structures in the lithosphere are expected to have large impact on the architecture of continental rifts. The Turkana depression in the East African Rift connects the Main Ethiopian Rift to the north with the Kenya rift in the south. This region is characterized by a NW-SE trending band of thinned crust inherited from a Mesozoic rifting event, which is cutting the present-day N-S rift trend at high angle. In striking contrast to the narrow rifts in Ethiopia and Kenya, extension in the Turkana region is accommodated in subparallel deformation domains that are laterally distributed over several hundred kilometers. We present both analog experiments and numerical models that reproduce the along-axis transition from narrow rifting in Ethiopia and Kenya to a distributed deformation within the Turkana depression. Similarly to natural observations, our models show that the Ethiopian and Kenyan rifts bend away from each other within the Turkana region, thus forming a right-lateral step over and avoiding a direct link to form a continuous N-S depression. The models reveal five potential types of rift linkage across the preexisting basin: three types where rifts bend away from the inherited structure connecting via a (1) wide or (2) narrow rift or by (3) forming a rotating microplate, (4) a type where rifts bend towards it, and (5) straight rift linkage. The fact that linkage type 1 is realized in the Turkana region provides new insights on the rheological configuration of the Mesozoic rift system at the onset of the recent rift episode. Plain Language Summary The Turkana depression in the Kenya/Ethiopia borderland is most famous for its several million years old human fossils, but it also holds a rich geological history of continental separation. The Turkana region is a lowland located between the East African and Ethiopian domes because its crust and mantle have been stretched in a continent-wide rift event during Cretaceous times about 140-120 Ma ago. This thin lithosphere exerted paramount control on the dynamics of East African rifting in this area, which commenced around 15 Ma ago and persists until today. Combining analog "sandbox" experiments with numerical geodynamic modeling, we find that inherited rift structures explain the dramatic change in rift style from deep, narrow rift basins north and south of the Turkana area to wide, distributed deformation within the Turkana depression. The failed Cretaceous rift is also responsible for the eastward bend of the Ethiopian rift and the westward bend of the Kenyan rift when entering the Turkana depression, which generated the characteristic hook-shaped form of present-day Lake Turkana. Combing two independent modeling techniques-analog and numerical experiments-is a very promising approach allowing to draw robust conclusions about the processes that shape the surface of our planet.}, language = {en} } @article{RubeyBruneHeineetal.2017, author = {Rubey, Michael and Brune, Sascha and Heine, Christian and Davies, D. Rhodri and Williams, Simon E. and M{\"u}ller, R. Dietmar}, title = {role of subducted slabs}, series = {Solid earth}, volume = {8}, journal = {Solid earth}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1869-9510}, doi = {10.5194/se-8-899-2017}, pages = {899 -- 919}, year = {2017}, language = {en} } @misc{WongMasonBruneetal.2019, author = {Wong, Kevin and Mason, Emily and Brune, Sascha and East, Madison and Edmonds, Marie and Zahirovic, Sabin}, title = {Deep Carbon Cycling Over the Past 200 Million Years: A Review of Fluxes in Different Tectonic Settings}, series = {Frontiers in Earth Science}, volume = {7}, journal = {Frontiers in Earth Science}, publisher = {Frontiers Research Foundation}, address = {Lausanne}, issn = {2296-6463}, doi = {10.3389/feart.2019.00263}, pages = {22}, year = {2019}, language = {en} } @article{LescoutreTugendBruneetal.2019, author = {Lescoutre, Rodolphe and Tugend, Julie and Brune, Sascha and Masini, Emmanuel and Manatschal, Gianreto}, title = {Thermal Evolution of Asymmetric Hyperextended Magma-Poor Rift Systems: Results From Numerical Modeling and Pyrenean Field Observations}, series = {Geochemistry, geophysics, geosystems}, volume = {20}, journal = {Geochemistry, geophysics, geosystems}, number = {10}, publisher = {American Geophysical Union}, address = {Washington}, issn = {1525-2027}, doi = {10.1029/2019GC008600}, pages = {4567 -- 4587}, year = {2019}, abstract = {We investigate the thermal and structural evolution of asymmetric rifted margin using numerical modeling and geological observations derived from the Western Pyrenees. Our numerical model provides a self-consistent physical evolution of the top basement heat flow during asymmetric rifting. The model shows a pronounced thermal asymmetry that is caused by migration of the rift center toward the upper plate. The same process creates a diachronism for the record of maximum heat flow and maximum temperatures (T-max) in basal rift sequences. The Mauleon-Arzacq basin (W-Pyrenees) corresponds to a former mid-Cretaceous asymmetric hyperextended rift basin. New vitrinite reflectance data in addition to existing data sets from this basin reveal an asymmetry in the distribution of peak heat (T-max) with respect to the rift shoulders, where highest values are located at the former upper- to lower-plate transition. This data set from the Arzacq-Mauleon field study confirms for the first time the thermal asymmetry predicted by numerical models. Numerical modeling results also suggest that complexities in synrift thermal architecture could arise when hanging-wall-derived extensional allochthons and related T-max become part of the lower plate and are transported away from the upper- to lower-plate transition. This study emphasizes the limitations of the common approach to integrate punctual thermal data from pre-rift to synrift sedimentary sequences in order to describe the rift-related thermal evolution and paleothermal gradients at the scale of a rift basin or a rifted margin.}, language = {en} } @article{NaliboffGlerumBruneetal.2020, author = {Naliboff, John B. and Glerum, Anne and Brune, Sascha and P{\´e}ron-Pinvidic, G. and Wrona, Thilo}, title = {Development of 3-D rift heterogeneity through fault network evolution}, series = {Geophysical Research Letters}, volume = {47}, journal = {Geophysical Research Letters}, number = {13}, publisher = {John Wiley \& Sons, Inc.}, address = {New Jersey}, pages = {11}, year = {2020}, abstract = {Observations of rift and rifted margin architecture suggest that significant spatial and temporal structural heterogeneity develops during the multiphase evolution of continental rifting. Inheritance is often invoked to explain this heterogeneity, such as preexisting anisotropies in rock composition, rheology, and deformation. Here, we use high-resolution 3-D thermal-mechanical numerical models of continental extension to demonstrate that rift-parallel heterogeneity may develop solely through fault network evolution during the transition from distributed to localized deformation. In our models, the initial phase of distributed normal faulting is seeded through randomized initial strength perturbations in an otherwise laterally homogeneous lithosphere extending at a constant rate. Continued extension localizes deformation onto lithosphere-scale faults, which are laterally offset by tens of km and discontinuous along-strike. These results demonstrate that rift- and margin-parallel heterogeneity of large-scale fault patterns may in-part be a natural byproduct of fault network coalescence.}, language = {en} } @misc{Brune2018, author = {Brune, Sascha}, title = {Forces within continental and oceanic rifts}, series = {Geology}, volume = {46}, journal = {Geology}, number = {2}, publisher = {American Institute of Physics}, address = {Boulder}, issn = {0091-7613}, doi = {10.1130/focus022018.1}, pages = {191 -- 192}, year = {2018}, language = {en} } @phdthesis{Brune2009, author = {Brune, Sascha}, title = {Landslide generated tsunamis : numerical modeling and real-time prediction}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-32986}, school = {Universit{\"a}t Potsdam}, year = {2009}, abstract = {Submarine landslides can generate local tsunamis posing a hazard to human lives and coastal facilities. Two major related problems are: (i) quantitative estimation of tsunami hazard and (ii) early detection of the most dangerous landslides. This thesis focuses on both those issues by providing numerical modeling of landslide-induced tsunamis and by suggesting and justifying a new method for fast detection of tsunamigenic landslides by means of tiltmeters. Due to the proximity to the Sunda subduction zone, Indonesian coasts are prone to earthquake, but also landslide tsunamis. The aim of the GITEWS-project (German-Indonesian Tsunami Early Warning System) is to provide fast and reliable tsunami warnings, but also to deepen the knowledge about tsunami hazards. New bathymetric data at the Sunda Arc provide the opportunity to evaluate the hazard potential of landslide tsunamis for the adjacent Indonesian islands. I present nine large mass movements in proximity to Sumatra, Java, Sumbawa and Sumba, whereof the largest event displaced 20 km³ of sediments. Using numerical modeling, I compute the generated tsunami of each event, its propagation and runup at the coast. Moreover, I investigate the age of the largest slope failures by relating them to the Great 1977 Sumba earthquake. Continental slopes off northwest Europe are well known for their history of huge underwater landslides. The current geological situation west of Spitsbergen is comparable to the continental margin off Norway after the last glaciation, when the large tsunamigenic Storegga slide took place. The influence of Arctic warming on the stability of the Svalbard glacial margin is discussed. Based on new geophysical data, I present four possible landslide scenarios and compute the generated tsunamis. Waves of 6 m height would be capable of reaching northwest Europe threatening coastal areas. I present a novel technique to detect large submarine landslides using an array of tiltmeters, as a possible tool in future tsunami early warning systems. The dislocation of a large amount of sediment during a landslide produces a permanent elastic response of the earth. I analyze this response with a mathematical model and calculate the theoretical tilt signal. Applications to the hypothetical Spitsbergen event and the historical Storegga slide show tilt signals exceeding 1000 nrad. The amplitude of landslide tsunamis is controlled by the product of slide volume and maximal velocity (slide tsunamigenic potential). I introduce an inversion routine that provides slide location and tsunamigenic potential, based on tiltmeter measurements. The accuracy of the inversion and of the estimated tsunami height near the coast depends on the noise level of tiltmeter measurements, the distance of tiltmeters from the slide, and the slide tsunamigenic potential. Finally, I estimate the applicability scope of this method by employing it to known landslide events worldwide.}, language = {en} } @article{BruneWilliamsMueller2018, author = {Brune, Sascha and Williams, Simon E. and M{\"u}ller, R. Dietmar}, title = {Oblique rifting: the rule, not the exception}, series = {Solid earth}, volume = {9}, journal = {Solid earth}, number = {5}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1869-9510}, doi = {10.5194/se-9-1187-2018}, pages = {1187 -- 1206}, year = {2018}, abstract = {Movements of tectonic plates often induce oblique deformation at divergent plate boundaries. This is in striking contrast with traditional conceptual models of rifting and rifted margin formation, which often assume 2-D deformation where the rift velocity is oriented perpendicular to the plate boundary. Here we quantify the validity of this assumption by analysing the kinematics of major continent-scale rift systems in a global plate tectonic reconstruction from the onset of Pangea breakup until the present day. We evaluate rift obliquity by joint examination of relative extension velocity and local rift trend using the script-based plate reconstruction software pyGPlates. Our results show that the global mean rift obliquity since 230 Ma amounts to 34 degrees with a standard deviation of 24 degrees, using the convention that the angle of obliquity is spanned by extension direction and rift trend normal. We find that more than similar to 70 \% of all rift segments exceeded an obliquity of 20 degrees demonstrating that oblique rifting should be considered the rule, not the exception. In many cases, rift obliquity and extension velocity increase during rift evolution (e.g. Australia-Antarctica, Gulf of California, South Atlantic, India-Antarctica), which suggests an underlying geodynamic correlation via obliquity-dependent rift strength. Oblique rifting produces 3-D stress and strain fields that cannot be accounted for in simplified 2-D plane strain analysis. We therefore highlight the importance of 3-D approaches in modelling, surveying, and interpretation of most rift segments on Earth where oblique rifting is the dominant mode of deformation.}, language = {en} } @article{UlvrovaBruneWilliams2019, author = {Ulvrova, Martina M. and Brune, Sascha and Williams, Simon E.}, title = {Breakup Without Borders}, series = {Geophysical research letters}, volume = {46}, journal = {Geophysical research letters}, number = {3}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1029/2018GL080387}, pages = {1338 -- 1347}, year = {2019}, abstract = {Relative plate motions during continental rifting result from the interplay of local with far-field forces. Here we study the dynamics of rifting and breakup using large-scale numerical simulations of mantle convection with self-consistent evolution of plate boundaries. We show that continental separation follows a characteristic evolution with four distinctive phases: (1) an initial slow rifting phase with low divergence velocities and maximum tensional stresses, (2) a synrift speed-up phase featuring an abrupt increase of extension rate with a simultaneous drop of tensional stress, (3) the breakup phase with inception of fast sea-floor spreading, and (4) a deceleration phase occurring in most but not all models where extensional velocities decrease. We find that the speed-up during rifting is compensated by subduction acceleration or subduction initiation even in distant localities. Our study illustrates new links between local rift dynamics, plate motions, and subduction kinematics during times of continental separation.}, language = {en} }