@phdthesis{Falter2016,
  author    = {Falter, Daniela},
  title     = {A novel approach for large-scale flood risk assessments},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90239},
  school      = {Universit{\"a}t Potsdam},
  pages     = {95},
  year      = {2016},
  abstract  = {In the past, floods were basically managed by flood control mechanisms. The focus was set on the reduction of flood hazard. The potential consequences were of minor interest. Nowadays river flooding is increasingly seen from the risk perspective, including possible consequences. Moreover, the large-scale picture of flood risk became increasingly important for disaster management planning, national risk developments and the (re-) insurance industry. Therefore, it is widely accepted that risk-orientated flood management ap-proaches at the basin-scale are needed. However, large-scale flood risk assessment methods for areas of several 10,000 km² are still in early stages. Traditional flood risk assessments are performed reach wise, assuming constant probabilities for the entire reach or basin. This might be helpful on a local basis, but where large-scale patterns are important this approach is of limited use. Assuming a T-year flood (e.g. 100 years) for the entire river network is unrealistic and would lead to an overestimation of flood risk at the large scale. Due to the lack of damage data, additionally, the probability of peak discharge or rainfall is usually used as proxy for damage probability to derive flood risk. With a continuous and long term simulation of the entire flood risk chain, the spatial variability of probabilities could be consider and flood risk could be directly derived from damage data in a consistent way. The objective of this study is the development and application of a full flood risk chain, appropriate for the large scale and based on long term and continuous simulation. The novel approach of 'derived flood risk based on continuous simulations' is introduced, where the synthetic discharge time series is used as input into flood impact models and flood risk is directly derived from the resulting synthetic damage time series. The bottleneck at this scale is the hydrodynamic simu-lation. To find suitable hydrodynamic approaches for the large-scale a benchmark study with simplified 2D hydrodynamic models was performed. A raster-based approach with inertia formulation and a relatively high resolution of 100 m in combination with a fast 1D channel routing model was chosen. To investigate the suitability of the continuous simulation of a full flood risk chain for the large scale, all model parts were integrated into a new framework, the Regional Flood Model (RFM). RFM consists of the hydrological model SWIM, a 1D hydrodynamic river network model, a 2D raster based inundation model and the flood loss model FELMOps+r. Subsequently, the model chain was applied to the Elbe catchment, one of the largest catchments in Germany. For the proof-of-concept, a continuous simulation was per-formed for the period of 1990-2003. Results were evaluated / validated as far as possible with available observed data in this period. Although each model part introduced its own uncertainties, results and runtime were generally found to be adequate for the purpose of continuous simulation at the large catchment scale. Finally, RFM was applied to a meso-scale catchment in the east of Germany to firstly perform a flood risk assessment with the novel approach of 'derived flood risk assessment based on continuous simulations'. Therefore, RFM was driven by long term synthetic meteorological input data generated by a weather generator. Thereby, a virtual time series of climate data of 100 x 100 years was generated and served as input to RFM providing subsequent 100 x 100 years of spatially consistent river discharge series, inundation patterns and damage values. On this basis, flood risk curves and expected annual damage could be derived directly from damage data, providing a large-scale picture of flood risk. In contrast to traditional flood risk analysis, where homogenous return periods are assumed for the entire basin, the presented approach provides a coherent large-scale picture of flood risk. The spatial variability of occurrence probability is respected. Additionally, data and methods are consistent. Catchment and floodplain processes are repre-sented in a holistic way. Antecedent catchment conditions are implicitly taken into account, as well as physical processes like storage effects, flood attenuation or channel-floodplain interactions and related damage influencing effects. Finally, the simulation of a virtual period of 100 x 100 years and consequently large data set on flood loss events enabled the calculation of flood risk directly from damage distributions. Problems associated with the transfer of probabilities in rainfall or peak runoff to probabilities in damage, as often used in traditional approaches, are bypassed. RFM and the 'derived flood risk approach based on continuous simulations' has the potential to provide flood risk statements for national planning, re-insurance aspects or other questions where spatially consistent, large-scale assessments are required.},
  language  = {en}
}
@phdthesis{Nied2016,
  author    = {Nied, Manuela},
  title     = {The role of soil moisture and weather patterns for flood occurrence and characteristics at the river basin scale},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94612},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVI, 86},
  year      = {2016},
  abstract  = {Flood generation at the scale of large river basins is triggered by the interaction of the hydrological pre-conditions and the meteorological event conditions at different spatial and temporal scales. This interaction controls diverse flood generating processes and results in floods varying in magnitude and extent, duration as well as socio-economic consequences. For a process-based understanding of the underlying cause-effect relationships, systematic approaches are required. These approaches have to cover the complete causal flood chain, including the flood triggering meteorological event in combination with the hydrological (pre-)conditions in the catchment, runoff generation, flood routing, possible floodplain inundation and finally flood losses. In this thesis, a comprehensive probabilistic process-based understanding of the causes and effects of floods is advanced. The spatial and temporal dynamics of flood events as well as the geophysical processes involved in the causal flood chain are revealed and the systematic interconnections within the flood chain are deciphered by means of the classification of their associated causes and effects. This is achieved by investigating the role of the hydrological pre-conditions and the meteorological event conditions with respect to flood occurrence, flood processes and flood characteristics as well as their interconnections at the river basin scale. Broadening the knowledge about flood triggers, which up to now has been limited to linking large-scale meteorological conditions to flood occurrence, the influence of large-scale pre-event hydrological conditions on flood initiation is investigated. Using the Elbe River basin as an example, a classification of soil moisture, a key variable of pre-event conditions, is developed and a probabilistic link between patterns of soil moisture and flood occurrence is established. The soil moisture classification is applied to continuously simulated soil moisture data which is generated using the semi-distributed conceptual rainfall-runoff model SWIM. Applying successively a principal component analysis and a cluster analysis, days of similar soil moisture patterns are identified in the period November 1951 to October 2003. The investigation of flood triggers is complemented by including meteorological conditions described by a common weather pattern classification that represents the main modes of atmospheric state variability. The newly developed soil moisture classification thereby provides the basis to study the combined impact of hydrological pre-conditions and large-scale meteorological event conditions on flood occurrence at the river basin scale. A process-based understanding of flood generation and its associated probabilities is attained by classifying observed flood events into process-based flood types such as snowmelt floods or long-rain floods. Subsequently, the flood types are linked to the soil moisture and weather patterns. Further understanding of the processes is gained by modeling of the complete causal flood chain, incorporating a rainfall-runoff model, a 1D/2D hydrodynamic model and a flood loss model. A reshuffling approach based on weather patterns and the month of their occurrence is developed to generate synthetic data fields of meteorological conditions, which drive the model chain, in order to increase the flood sample size. From the large number of simulated flood events, the impact of hydro-meteorological conditions on various flood characteristics is detected through the analysis of conditional cumulative distribution functions and regression trees. The results show the existence of catchment-scale soil moisture patterns, which comprise of large-scale seasonal wetting and drying components as well as of smaller-scale variations related to spatially heterogeneous catchment processes. Soil moisture patterns frequently occurring before the onset of floods are identified. In winter, floods are initiated by catchment-wide high soil moisture, whereas in summer the flood-initiating soil moisture patterns are diverse and the soil moisture conditions are less stable in time. The combined study of both soil moisture and weather patterns shows that the flood favoring hydro-meteorological patterns as well as their interactions vary seasonally. In the analysis period, 18 \% of the weather patterns only result in a flood in the case of preceding soil saturation. The classification of 82 past events into flood types reveals seasonally varying flood processes that can be linked to hydro-meteorological patterns. For instance, the highest flood potential for long-rain floods is associated with a weather pattern that is often detected in the presence of so-called 'Vb' cyclones. Rain-on-snow and snowmelt floods are associated with westerly and north-westerly wind directions. The flood characteristics vary among the flood types and can be reproduced by the applied model chain. In total, 5970 events are simulated. They reproduce the observed event characteristics between September 1957 and August 2002 and provide information on flood losses. A regression tree analysis relates the flood processes of the simulated events to the hydro-meteorological (pre-)event conditions and highlights the fact that flood magnitude is primarily controlled by the meteorological event, whereas flood extent is primarily controlled by the soil moisture conditions. Describing flood occurrence, processes and characteristics as a function of hydro-meteorological patterns, this thesis is part of a paradigm shift towards a process-based understanding of floods. The results highlight that soil moisture patterns as well as weather patterns are not only beneficial to a probabilistic conception of flood initiation but also provide information on the involved flood processes and the resulting flood characteristics.},
  language  = {en}
}
@phdthesis{Molkenthin2016,
  author    = {Molkenthin, Christian},
  title     = {Sensitivity analysis in seismic Hazard assessment using algorithmic differentiation},
  school      = {Universit{\"a}t Potsdam},
  pages     = {114},
  year      = {2016},
  language  = {en}
}
@phdthesis{Niemeyer2016,
  author    = {Niemeyer, Bastian},
  title     = {Vegetation reconstruction and assessment of plant diversity at the treeline ecotone in northern Siberia},
  school      = {Universit{\"a}t Potsdam},
  pages     = {146},
  year      = {2016},
  language  = {en}
}
@phdthesis{Cattania2015,
  author    = {Cattania, Camilla},
  title     = {Improvement of aftershock models based on Coulomb stress changes and rate-and-state dependent friction},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-87097},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 123},
  year      = {2015},
  abstract  = {Earthquake clustering has proven the most useful tool to forecast changes in seismicity rates in the short and medium term (hours to months), and efforts are currently being made to extend the scope of such models to operational earthquake forecasting. The overarching goal of the research presented in this thesis is to improve physics-based earthquake forecasts, with a focus on aftershock sequences. Physical models of triggered seismicity are based on the redistribution of stresses in the crust, coupled with the rate-and-state constitutive law proposed by Dieterich to calculate changes in seismicity rate. This type of models are known as Coulomb- rate and-state (CRS) models. In spite of the success of the Coulomb hypothesis, CRS models typically performed poorly in comparison to statistical ones, and they have been underepresented in the operational forecasting context. In this thesis, I address some of these issues, and in particular these questions: (1) How can we realistically model the uncertainties and heterogeneity of the mainshock stress field? (2) What is the effect of time dependent stresses in the postseismic phase on seismicity? I focus on two case studies from different tectonic settings: the Mw 9.0 Tohoku megathrust and the Mw 6.0 Parkfield strike slip earthquake. I study aleatoric uncertainties using a Monte Carlo method. I find that the existence of multiple receiver faults is the most important source of intrinsic stress heterogeneity, and CRS models perform better when this variability is taken into account. Epistemic uncertainties inherited from the slip models also have a significant impact on the forecast, and I find that an ensemble model based on several slip distributions outperforms most individual models. I address the role of postseismic stresses due to aseismic slip on the mainshock fault (afterslip) and to the redistribution of stresses by previous aftershocks (secondary triggering). I find that modeling secondary triggering improves model performance. The effect of afterslip is less clear, and difficult to assess for near-fault aftershocks due to the large uncertainties of the afterslip models. Off-fault events, on the other hand, are less sensitive to the details of the slip distribution: I find that following the Tohoku earthquake, afterslip promotes seismicity in the Fukushima region. To evaluate the performance of the improved CRS models in a pseudo-operational context, I submitted them for independent testing to a collaborative experiment carried out by CSEP for the 2010-2012 Canterbury sequence. Preliminary results indicate that physical models generally perform well compared to statistical ones, suggesting that CRS models may have a role to play in the future of operational forecasting. To facilitate efforts in this direction, and to enable future studies of earthquake triggering by time dependent processes, I have made the code open source. In the final part of this thesis I summarize the capabilities of the program and outline technical aspects regarding performance and parallelization strategies.},
  language  = {en}
}
@phdthesis{Ramisch2015,
  author    = {Ramisch, Arne},
  title     = {Lake system development on the northern Tibetan Plateau during the last ~ 12 ka},
  school      = {Universit{\"a}t Potsdam},
  pages     = {122},
  year      = {2015},
  language  = {en}
}
@phdthesis{Rach2015,
  author    = {Rach, Oliver},
  title     = {Qualitative and quantitative estimations of hydrological changes in western Europe during abrupt climate shifts using lipid biomarker derived stable hydrogen isotope records},
  school      = {Universit{\"a}t Potsdam},
  pages     = {217},
  year      = {2015},
  language  = {en}
}
@phdthesis{Mielke2015,
  author    = {Mielke, Christian},
  title     = {Multi- and Hyperspectral Spaceborne Remote Sensing for Mine Waste and Mineral Deposit Characterization, new Applications to the EnMAP and Sentinel-2 Missions},
  school      = {Universit{\"a}t Potsdam},
  pages     = {140},
  year      = {2015},
  language  = {en}
}
@phdthesis{Ayguel2015,
  author    = {Ayg{\"u}l, Mesut},
  title     = {Pre-collisional accretion and exhumation along the southern Laurasian active margin, Central Pontides, Turkey},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-416769},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxxiv, 206},
  year      = {2015},
  abstract  = {The Central Pontides is an accretionary-type orogenic area within the Alpine-Himalayan orogenic belt characterized by pre-collisional tectonic continental growth. The region comprises Mesozoic subduction-accretionary complexes and an accreted intra-oceanic arc that are sandwiched between the Laurasian active continental margin and Gondwana-derived the K{\i}r{\c{s}}ehir Block. The subduction-accretion complexes mainly consist of an Albian-Turonian accretionary wedge representing the Laurasian active continental margin. To the north, the wedge consists of slate/phyllite and metasandstone intercalation with recrystallized limestone, Na-amphibole-bearing metabasite (PT= 7-12 kbar and 400 ± 70 ºC) and tectonic slices of serpentinite representing accreted distal part of a large Lower Cretaceous submarine turbidite fan deposited on the Laurasian active continental margin that was subsequently accreted and metamorphosed. Raman spectra of carbonaceous material (RSCM) of the metapelitic rocks revealed that the metaflysch sequence consists of metamorphic packets with distinct peak metamorphic temperatures. The majority of the metapelites are low-temperature (ca. 330 °C) slates characterized by lack of differentiation of the graphite (G) and D2 defect bands. They possibly represent offscraped distal turbidites along the toe of the Albian accretionary wedge. The rest are phyllites that are characterized by slightly pronounced G band with D2 defect band occurring on its shoulder. Peak metamorphic temperatures of these phyllites are constrained to 370-385 °C. The phyllites are associated with a strip of incipient blueschist facies metabasites which are found as slivers within the offscraped distal turbidites. They possibly represent underplated continental metasediments together with oceanic crustal basalt along the basal d{\´e}collement. Tectonic emplacement of the underplated rocks into the offscraped distal turbidites was possibly achieved by out-of-sequence thrusting causing tectonic thickening and uplift of the wedge. 40Ar/39Ar phengite ages from the phyllites are ca. 100 Ma, indicating Albian subduction and regional HP metamorphism. The accreted continental metasediments are underlain by HP/LT metamorphic rocks of oceanic origin along an extensional shear zone. The oceanic metamorphic sequence mainly comprises tectonically thickened deep-seated eclogite to blueschist facies metabasites and micaschists. In the studied area, metabasites are epidote-blueschists locally with garnet (PT= 17 ± 1 kbar and 500 ± 40 °C). Lawsonite-blueschists are exposed as blocks along the extensional shear zone (PT= 14 ± 2 kbar and 370-440 °C). They are possibly associated with low shear stress regime of the initial stage of convergence. Close to the shear zone, the footwall micaschists consist of quartz, phengite, paragonite, chlorite, rutile with syn-kinematic albite porphyroblast formed by pervasive shearing during exhumation. These types of micaschists are tourmaline-bearing and their retrograde nature suggests high-fluid flux along shear zones. Peak metamorphic mineral assemblages are partly preserved in the chloritoid-micaschist farther away from the shear zone representing the zero strain domains during exhumation. Three peak metamorphic assemblages are identified and their PT conditions are constrained by pseudosections produced by Theriak-Domino and by Raman spectra of carbonaceous material: 1) garnet-chloritoid-glaucophane with lawsonite pseudomorphs (P= 17.5 ± 1 kbar, T: 390-450 °C) 2) chloritoid with glaucophane pseudomorphs (P= 16-18 kbar, T: 475 ± 40 °C) and 3) relatively high-Mg chloritoid (17\%) with jadeite pseudomorphs (P= 22-25 kbar; T: 440 ± 30 °C) in addition to phengite, paragonite, quartz, chlorite, rutile and apatite. The last mineral assemblage is interpreted as transformation of the chloritoid + glaucophane assemblage to chloritoid + jadeite paragenesis with increasing pressure. Absence of tourmaline suggests that the chloritoid-micaschist did not interact with B-rich fluids during zero strain exhumation. 40Ar/39Ar phengite age of a pervasively sheared footwall micaschist is constrained to 100.6 ± 1.3 Ma and that of a chloritoid-micaschist is constrained to 91.8 ± 1.8 Ma suggesting exhumation during on-going subduction with a southward younging of the basal accretion and the regional metamorphism. To the south, accretionary wedge consists of blueschist and greenschist facies metabasite, marble and volcanogenic metasediment intercalation. 40Ar/39Ar phengite dating reveals that this part of the wedge is of Middle Jurassic age partly overprinted during the Albian. Emplacement of the Middle Jurassic subduction-accretion complexes is possibly associated with obliquity of the Albian convergence. Peak metamorphic assemblages and PT estimates of the deep-seated oceanic metamorphic sequence suggest tectonic stacking within wedge with different depths of burial. Coupling and exhumation of the distinct metamorphic slices are controlled by decompression of the wedge possibly along a retreating slab. Structurally, decompression of the wedge is evident by an extensional shear zone and the footwall micaschists with syn-kinematic albite porphyroblasts. Post-kinematic garnets with increasing grossular content and pseudomorphing minerals within the chloritoid-micaschists also support decompression model without an extra heating. Thickening of subduction-accretionary complexes is attributed to i) significant amount of clastic sediment supply from the overriding continental domain and ii) deep level basal underplating by propagation of the d{\´e}collement along a retreating slab. Underplating by basal d{\´e}collement propagation and subsequent exhumation of the deep-seated subduction-accretion complexes are connected and controlled by slab rollback creating a necessary space for progressive basal accretion along the plate interface and extension of the wedge above for exhumation of the tectonically thickened metamorphic sequences. This might be the most common mechanism of the tectonic thickening and subsequent exhumation of deep-seated HP/LT subduction-accretion complexes. To the south, the Albian-Turonian accretionary wedge structurally overlies a low-grade volcanic arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed north of the İzmir-Ankara-Erzincan suture (İAES), separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metavolcanic rocks are stratigraphically overlain by recrystallized micritic limestone with rare volcanogenic metaclastic rocks. Two groups can be identified based on trace and rare earth element characteristics. The first group consists of basaltic andesite/andesite (BA1) and rhyolite with abundant cognate gabbroic xenoliths. It is characterized by relative enrichment of LREE with respect to HREE. The rocks are enriched in fluid mobile LILE, and strongly depleted in Ti and P reflecting fractionation of Fe-Ti oxides and apatite, which are found in the mafic cognate xenoliths. Abundant cognate gabbroic xenoliths and identical trace and rare earth elements compositions suggest that rhyolites and basaltic andesites/andesites (BA1) are cogenetic and felsic rocks were derived from a common mafic parental magma by fractional crystallization and accumulation processes. The second group consists only of basaltic andesites (BA2) with flat REE pattern resembling island arc tholeiites. Although enriched in LILE, this group is not depleted in Ti or P. Geochemistry of the metavolcanic rocks indicates supra-subduction volcanism evidenced by depletion of HFSE and enrichment of LILE. The arc sequence is sandwiched between an Albian-Turonian subduction-accretionary complex representing the Laurasian active margin and an ophiolitic m{\´e}lange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the K{\"o}sdağ Arc was intra-oceanic. This is in accordance with basaltic andesites (BA2) with island arc tholeiite REE pattern. Zircons from two metarhyolite samples give Late Cretaceous (93.8 ± 1.9 and 94.4 ± 1.9 Ma) U/Pb ages. Low-grade regional metamorphism of the intra-oceanic arc sequence is constrained 69.9 ± 0.4 Ma by 40Ar/39Ar dating on metamorphic muscovite from a metarhyolite indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. The youngest 40Ar/39Ar phengite age from the overlying subduction-accretion complexes is 92 Ma confirming southward younging of an accretionary-type orogenic belt. Hence, the arc sequence represents an intra-oceanic paleo-arc that formed above the sinking Tethyan slab and finally accreted to Laurasian active continental margin. Abrupt non-collisional termination of arc volcanism was possibly associated with southward migration of the arc volcanism similar to the Izu-Bonin-Mariana arc system. The intra-oceanic K{\"o}sdağ Arc is coeval with the obducted supra-subduction ophiolites in NW Turkey suggesting that it represents part of the presumed but missing incipient intra-oceanic arc associated with the generation of the regional supra-subduction ophiolites. Remnants of a Late Cretaceous intra-oceanic paleo-arc and supra-subduction ophiolites can be traced eastward within the Alp-Himalayan orogenic belt. This reveals that Late Cretaceous intra-oceanic subduction occurred as connected event above the sinking Tethyan slab. It resulted as arc accretion to Laurasian active margin and supra-subduction ophiolite obduction on Gondwana-derived terranes.},
  language  = {en}
}
@phdthesis{Priegnitz2015,
  author    = {Priegnitz, Mike},
  title     = {Development of geophysical methods to characterize methane hydrate reservoirs on a laboratory scale},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-89321},
  school      = {Universit{\"a}t Potsdam},
  pages     = {X, 99},
  year      = {2015},
  abstract  = {Gashydrate sind kristalline Feststoffe bestehend aus Wasser und Gasmolek{\"u}len. Sie sind stabil bei erh{\"o}hten Dr{\"u}cken und niedrigen Temperaturen. Nat{\"u}rliche Hydratvorkommen treten daher an Kontinentalh{\"a}ngen, in Permafrostb{\"o}den und in tiefen Seen sowie Binnenmeeren auf. Bei der Hydratbildung orientieren sich die Wassermolek{\"u}le neu und bilden sogenannte K{\"a}figstrukturen, in die Gas eingelagert werden kann. Aufgrund des hohen Drucks bei der Hydratbildung k{\"o}nnen große Mengen an Gas in die Hydratstruktur eingebaut werden. Das Volumenverh{\"a}ltnis von Wasser zu Gas kann dabei bis zu 1:172 bei 0°C und Atmosph{\"a}rendruck betragen. Nat{\"u}rliche Gashydrate enthalten haupts{\"a}chlich Methan. Da Methan sowohl ein Treibhausgas als auch ein Brenngas ist, stellen Gashydrate gleichermaßen eine potentielle Energieressource sowie eine m{\"o}gliche Quelle f{\"u}r Treibhausgase dar. Diese Arbeit untersucht die physikalischen Eigenschaften von Methanhydrat ges{\"a}ttigten Sedimentproben im Labormaßstab. Dazu wurde ein großer Reservoirsimulator (LARS) mit einer eigens entwickelten elektrischen Widerstandstomographie ausger{\"u}stet, die das erste Mal an hydratges{\"a}ttigten Sedimentproben unter kontrollierten Temperatur-, Druck-, und Hydrats{\"a}ttigungsbedingungen im Labormaßstab angewendet wurde. {\"U}blicherweise ist der Porenraum von (marinen) Sedimenten mit elektrisch gut leitendem Salzwasser gef{\"u}llt. Da Hydrate einen elektrischen Isolator darstellen, ergeben sich große Kontraste hinsichtlich der elektrischen Eigenschaften im Porenraum w{\"a}hrend der Hydratbildung und -zersetzung. Durch wiederholte Messungen w{\"a}hrend der Hydraterzeugung ist es m{\"o}glich die r{\"a}umliche Widerstandsverteilung in LARS aufzuzeichnen. Diese Daten bilden in der Folge die Grundlage f{\"u}r eine neue Auswerteroutine, welche die r{\"a}umliche Widerstandsverteilung in die r{\"a}umliche Verteilung der Hydrats{\"a}ttigung {\"u}berf{\"u}hrt. Dadurch ist es m{\"o}glich, die sich {\"a}ndernde Hydrats{\"a}ttigung sowohl r{\"a}umlich als auch zeitlich hoch aufgel{\"o}st w{\"a}hrend der gesamten Hydraterzeugungsphase zu verfolgen. Diese Arbeit zeigt, dass die entwickelte Widerstandstomographie eine gute Datenqualit{\"a}t aufwies und selbst geringe Hydrats{\"a}ttigungen innerhalb der Sedimentprobe detektiert werden konnten. Bei der Umrechnung der Widerstandsverteilung in lokale Hydrat-S{\"a}ttigungswerte wurden die besten Ergebnisse mit dem Archie-var-phi Ansatz erzielt, der die zunehmende Hydratphase dem Sedimentger{\"u}st zuschreibt, was einer Abnahme der Porosit{\"a}t gleichkommt. Die Widerstandsmessungen zeigten weiterhin, dass die schnelle Hydraterzeugung im Labor zur Ausbildung von kleinen Hydratkristallen f{\"u}hrte, die dazu neigten, zu rekristalliesieren. Es wurden weiterhin Hydrat-Abbauversuche durchgef{\"u}hrt, bei denen die Hydratphase {\"u}ber Druckerniedrigung in Anlehnung an den 2007/2008 Mallik Feldtest zersetzt wurde. Dabei konnte beobachtet werden, dass die Muster der Gas- undWasserflussraten im Labor zum Teil gut nachgebildet werden konnten, jedoch auch aufbaubedingte Abweichungen auftraten. In zwei weiteren Langzeitversuchen wurde die Realisierbarkeit und das Verhalten bei CO2-CH4-Hydrat Austauschversuchen in LARS untersucht. Das tomographische Messsystem wurde dabei genutzt um w{\"a}hrend der CH4 Hydrat Aufbauphase die Hydratverteilung innerhalb der Sedimentprobe zu {\"u}berwachen. Im Zuge der anschließenden CO2-Injektion konnte mithilfe der Widerstandstomographie die sich ausbreitende CO2-Front {\"u}berwacht und der Zeitpunkt des CO2 Durchbruchs identifiziert werden.},
  language  = {en}
}