@book{Laloe2024, author = {Lalo{\"e}, Franck}, title = {Grundlagen kontinuierlicher Symmetrien}, publisher = {Wiley-VCH}, address = {Weinheim}, isbn = {978-3-527-41415-4}, pages = {xii, 538}, year = {2024}, abstract = {Das neue Buch von Franck Lalo{\"e} stellt einen symmetriebasierten Ansatz vor, um die Quantenmechanik auf einer fundamentalen Ebene zu verstehen, und liefert die dazugeh{\"o}rigen Rechentechniken, um fortgeschrittene Kurse {\"u}ber Kernphysik, Quantenoptik und Festk{\"o}rperphysik zu meistern.}, language = {de} } @phdthesis{Schroeder2024, author = {Schr{\"o}der, Jakob}, title = {Fundamentals of diffraction-based residual stress and texture analysis of laser powder bed fused Inconel 718}, doi = {10.25932/publishup-62197}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-621972}, school = {Universit{\"a}t Potsdam}, pages = {XVII, 135}, year = {2024}, abstract = {Additive manufacturing (AM) processes enable the production of metal structures with exceptional design freedom, of which laser powder bed fusion (PBF-LB) is one of the most common. In this process, a laser melts a bed of loose feedstock powder particles layer-by-layer to build a structure with the desired geometry. During fabrication, the repeated melting and rapid, directional solidification create large temperature gradients that generate large thermal stress. This thermal stress can itself lead to cracking or delamination during fabrication. More often, large residual stresses remain in the final part as a footprint of the thermal stress. This residual stress can cause premature distortion or even failure of the part in service. Hence, knowledge of the residual stress field is critical for both process optimization and structural integrity. Diffraction-based techniques allow the non-destructive characterization of the residual stress fields. However, such methods require a good knowledge of the material of interest, as certain assumptions must be made to accurately determine residual stress. First, the measured lattice plane spacings must be converted to lattice strains with the knowledge of a strain-free material state. Second, the measured lattice strains must be related to the macroscopic stress using Hooke's law, which requires knowledge of the stiffness of the material. Since most crystal structures exhibit anisotropic material behavior, the elastic behavior is specific to each lattice plane of the single crystal. Thus, the use of individual lattice planes in monochromatic diffraction residual stress analysis requires knowledge of the lattice plane-specific elastic properties. In addition, knowledge of the microstructure of the material is required for a reliable assessment of residual stress. This work presents a toolbox for reliable diffraction-based residual stress analysis. This is presented for a nickel-based superalloy produced by PBF-LB. First, this work reviews the existing literature in the field of residual stress analysis of laser-based AM using diffraction-based techniques. Second, the elastic and plastic anisotropy of the nickel-based superalloy Inconel 718 produced by PBF-LB is studied using in situ energy dispersive synchrotron X-ray and neutron diffraction techniques. These experiments are complemented by ex situ material characterization techniques. These methods establish the relationship between the microstructure and texture of the material and its elastic and plastic anisotropy. Finally, surface, sub-surface, and bulk residual stress are determined using a texture-based approach. Uncertainties of different methods for obtaining stress-free reference values are discussed. The tensile behavior in the as-built condition is shown to be controlled by texture and cellular sub-grain structure, while in the heat-treated condition the precipitation of strengthening phases and grain morphology dictate the behavior. In fact, the results of this thesis show that the diffraction elastic constants depend on the underlying microstructure, including texture and grain morphology. For columnar microstructures in both as-built and heat-treated conditions, the diffraction elastic constants are best described by the Reuss iso-stress model. Furthermore, the low accumulation of intergranular strains during deformation demonstrates the robustness of using the 311 reflection for the diffraction-based residual stress analysis with columnar textured microstructures. The differences between texture-based and quasi-isotropic approaches for the residual stress analysis are shown to be insignificant in the observed case. However, the analysis of the sub-surface residual stress distributions show, that different scanning strategies result in a change in the orientation of the residual stress tensor. Furthermore, the location of the critical sub-surface tensile residual stress is related to the surface roughness and the microstructure. Finally, recommendations are given for the diffraction-based determination and evaluation of residual stress in textured additively manufactured alloys.}, language = {en} } @phdthesis{GostkowskaLekner2024, author = {Gostkowska-Lekner, Natalia Katarzyna}, title = {Organic-inorganic hybrids based on P3HT and mesoporous silicon for thermoelectric applications}, doi = {10.25932/publishup-62047}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-620475}, school = {Universit{\"a}t Potsdam}, pages = {121}, year = {2024}, abstract = {This thesis presents a comprehensive study on synthesis, structure and thermoelectric transport properties of organic-inorganic hybrids based on P3HT and porous silicon. The effect of embedding polymer in silicon pores on the electrical and thermal transport is studied. Morphological studies confirm successful polymer infiltration and diffusion doping with roughly 50\% of the pore space occupied by conjugated polymer. Synchrotron diffraction experiments reveal no specific ordering of the polymer inside the pores. P3HT-pSi hybrids show improved electrical transport by five orders of magnitude compared to porous silicon and power factor values comparable or exceeding other P3HT-inorganic hybrids. The analysis suggests different transport mechanisms in both materials. In pSi, the transport mechanism relates to a Meyer-Neldel compansation rule. The analysis of hybrids' data using the power law in Kang-Snyder model suggests that a doped polymer mainly provides charge carriers to the pSi matrix, similar to the behavior of a doped semiconductor. Heavily suppressed thermal transport in porous silicon is treated with a modified Landauer/Lundstrom model and effective medium theories, which reveal that pSi agrees well with the Kirkpatrick model with a 68\% percolation threshold. Thermal conductivities of hybrids show an increase compared to the empty pSi but the overall thermoelectric figure of merit ZT of P3HT-pSi hybrid exceeds both pSi and P3HT as well as bulk Si.}, language = {en} } @phdthesis{Stange2024, author = {Stange, Maike}, title = {A study on Coronin-A and Aip1 function in motility of Dictyostelium discoideum and on Aip1 interchangeability between Dictyostelium discoideum and Arabidopsis thaliana}, doi = {10.25932/publishup-62856}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-628569}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 168}, year = {2024}, abstract = {Actin is one of the most highly conserved proteins in eukaryotes and distinct actin-related proteins with filament-forming properties are even found in prokaryotes. Due to these commonalities, actin-modulating proteins of many species share similar structural properties and proposed functions. The polymerization and depolymerization of actin are critical processes for a cell as they can contribute to shape changes to adapt to its environment and to move and distribute nutrients and cellular components within the cell. However, to what extent functions of actin-binding proteins are conserved between distantly related species, has only been addressed in a few cases. In this work, functions of Coronin-A (CorA) and Actin-interacting protein 1 (Aip1), two proteins involved in actin dynamics, were characterized. In addition, the interchangeability and function of Aip1 were investigated in two phylogenetically distant model organisms. The flowering plant Arabidopsis thaliana (encoding two homologs, AIP1-1 and AIP1-2) and in the amoeba Dictyostelium discoideum (encoding one homolog, DdAip1) were chosen because the functions of their actin cytoskeletons may differ in many aspects. Functional analyses between species were conducted for AIP1 homologs as flowering plants do not harbor a CorA gene. In the first part of the study, the effect of four different mutation methods on the function of Coronin-A protein and the resulting phenotype in D. discoideum was revealed in two genetic knockouts, one RNAi knockdown and a sudden loss-of-function mutant created by chemical-induced dislocation (CID). The advantages and disadvantages of the different mutation methods on the motility, appearance and development of the amoebae were investigated, and the results showed that not all observed properties were affected with the same intensity. Remarkably, a new combination of Selection-Linked Integration and CID could be established. In the second and third parts of the thesis, the exchange of Aip1 between plant and amoeba was carried out. For A. thaliana, the two homologs (AIP1-1 and AIP1-2) were analyzed for functionality as well as in D. discoideum. In the Aip1-deficient amoeba, rescue with AIP1-1 was more effective than with AIP1-2. The main results in the plant showed that in the aip1-2 mutant background, reintroduced AIP1-2 displayed the most efficient rescue and A. thaliana AIP1-1 rescued better than DdAip1. The choice of the tagging site was important for the function of Aip1 as steric hindrance is a problem. The DdAip1 was less effective when tagged at the C-terminus, while the plant AIP1s showed mixed results depending on the tag position. In conclusion, the foreign proteins partially rescued phenotypes of mutant plants and mutant amoebae, despite the organisms only being very distantly related in evolutionary terms.}, language = {en} } @phdthesis{Littmann2024, author = {Littmann, Daniela-Christin}, title = {Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track}, doi = {10.25932/publishup-62437}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-624374}, school = {Universit{\"a}t Potsdam}, pages = {xii, 110}, year = {2024}, abstract = {The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models.}, language = {en} } @phdthesis{Shaw2024, author = {Shaw, Vasundhara}, title = {Cosmic-ray transport and signatures in their local environment}, doi = {10.25932/publishup-62019}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-620198}, school = {Universit{\"a}t Potsdam}, pages = {143}, year = {2024}, abstract = {The origin and structure of magnetic fields in the Galaxy are largely unknown. What is known is that they are essential for several astrophysical processes, in particular the propagation of cosmic rays. Our ability to describe the propagation of cosmic rays through the Galaxy is severely limited by the lack of observational data needed to probe the structure of the Galactic magnetic field on many different length scales. This is particularly true for modelling the propagation of cosmic rays into the Galactic halo, where our knowledge of the magnetic field is particularly poor. In the last decade, observations of the Galactic halo in different frequency regimes have revealed the existence of out-of-plane bubble emission in the Galactic halo. In gamma rays these bubbles have been termed Fermi bubbles with a radial extent of ≈ 3 kpc and an azimuthal height of ≈ 6 kpc. The radio counterparts of the Fermi bubbles were seen by both the S-PASS telescopes and the Planck satellite, and showed a clear spatial overlap. The X-ray counterparts of the Fermi bubbles were named eROSITA bubbles after the eROSITA satellite, with a radial width of ≈ 7 kpc and an azimuthal height of ≈ 14 kpc. Taken together, these observations suggest the presence of large extended Galactic Halo Bubbles (GHB) and have stimulated interest in exploring the less explored Galactic halo. In this thesis, a new toy model (GHB model) for the magnetic field and non-thermal electron distribution in the Galactic halo has been proposed. The new toy model has been used to produce polarised synchrotron emission sky maps. Chi-square analysis was used to compare the synthetic skymaps with the Planck 30 GHz polarised skymaps. The obtained constraints on the strength and azimuthal height were found to be in agreement with the S-PASS radio observations. The upper, lower and best-fit values obtained from the above chi-squared analysis were used to generate three separate toy models. These three models were used to propagate ultra-high energy cosmic rays. This study was carried out for two potential sources, Centaurus A and NGC 253, to produce magnification maps and arrival direction skymaps. The simulated arrival direction skymaps were found to be consistent with the hotspots of Centaurus A and NGC 253 as seen in the observed arrival direction skymaps provided by the Pierre Auger Observatory (PAO). The turbulent magnetic field component of the GHB model was also used to investigate the extragalactic dipole suppression seen by PAO. UHECRs with an extragalactic dipole were forward-tracked through the turbulent GHB model at different field strengths. The suppression in the dipole due to the varying diffusion coefficient from the simulations was noted. The results could also be compared with an analytical analogy of electrostatics. The simulations of the extragalactic dipole suppression were in agreement with similar studies carried out for galactic cosmic rays.}, language = {en} } @phdthesis{Alawashra2024, author = {Alawashra, Mahmoud}, title = {Plasma instabilities of TeV pair beams induced by blazars}, doi = {10.25932/publishup-63013}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-630131}, school = {Universit{\"a}t Potsdam}, pages = {xxi, 130}, year = {2024}, abstract = {Relativistic pair beams produced in the cosmic voids by TeV gamma rays from blazars are expected to produce a detectable GeV-scale cascade emission missing in the observations. The suppression of this secondary cascade implies either the deflection of the pair beam by intergalactic magnetic fields (IGMFs) or an energy loss of the beam due to the electrostatic beam-plasma instability. IGMF of femto-Gauss strength is sufficient to significantly deflect the pair beams reducing the flux of secondary cascade below the observational limits. A similar flux reduction may result in the absence of the IGMF from the beam energy loss by the instability before the inverse Compton cooling. This dissertation consists of two studies about the instability role in the evolution of blazar-induced beams. Firstly, we investigated the effect of sub-fG level IGMF on the beam energy loss by the instability. Considering IGMF with correlation lengths smaller than a few kpc, we found that such fields increase the transverse momentum of the pair beam particles, dramatically reducing the linear growth rate of the electrostatic instability and hence the energy-loss rate of the pair beam. Our results show that the IGMF eliminates beam plasma instability as an effective energy-loss agent at a field strength three orders of magnitude below that needed to suppress the secondary cascade emission by magnetic deflection. For intermediate-strength IGMF, we do not know a viable process to explain the observed absence of GeV-scale cascade emission and hence can be excluded. Secondly, we probed how the beam-plasma instability feeds back on the beam, using a realistic two-dimensional beam distribution. We found that the instability broadens the beam opening angles significantly without any significant energy loss, thus confirming a recent feedback study on a simplified one-dimensional beam distribution. However, narrowing diffusion feedback of the beam particles with Lorentz factors less than 1e6 might become relevant even though initially it is negligible. Finally, when considering the continuous creation of TeV pairs, we found that the beam distribution and the wave spectrum reach a new quasi-steady state, in which the scattering of beam particles persists and the beam opening angle may increase by a factor of hundreds. This new intrinsic scattering of the cascade can result in time delays of around ten years, thus potentially mimicking the IGMF deflection. Understanding the implications on the GeV cascade emission requires accounting for inverse Compton cooling and simulating the beam-plasma system at different points in the IGM.}, language = {en} } @phdthesis{Doerries2024, author = {D{\"o}rries, Timo Julian}, title = {Anomalous transport and non-Gaussian dynamics in mobile-immobile models}, doi = {10.25932/publishup-63495}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-634959}, school = {Universit{\"a}t Potsdam}, pages = {ii, 177}, year = {2024}, abstract = {The mobile-immobile model (MIM) has been established in geoscience in the context of contaminant transport in groundwater. Here the tracer particles effectively immobilise, e.g., due to diffusion into dead-end pores or sorption. The main idea of the MIM is to split the total particle density into a mobile and an immobile density. Individual tracers switch between the mobile and immobile state following a two-state telegraph process, i.e., the residence times in each state are distributed exponentially. In geoscience the focus lies on the breakthrough curve (BTC), which is the concentration at a fixed location over time. We apply the MIM to biological experiments with a special focus on anomalous scaling regimes of the mean squared displacement (MSD) and non-Gaussian displacement distributions. As an exemplary system, we have analysed the motion of tau proteins, that diffuse freely inside axons of neurons. Their free diffusion thereby corresponds to the mobile state of the MIM. Tau proteins stochastically bind to microtubules, which effectively immobilises the tau proteins until they unbind and continue diffusing. Long immobilisation durations compared to the mobile durations give rise to distinct non-Gaussian Laplace shaped distributions. It is accompanied by a plateau in the MSD for initially mobile tracer particles at relevant intermediate timescales. An equilibrium fraction of initially mobile tracers gives rise to non-Gaussian displacements at intermediate timescales, while the MSD remains linear at all times. In another setting bio molecules diffuse in a biosensor and transiently bind to specific receptors, where advection becomes relevant in the mobile state. The plateau in the MSD observed for the advection-free setting and long immobilisation durations persists also for the case with advection. We find a new clear regime of anomalous diffusion with non-Gaussian distributions and a cubic scaling of the MSD. This regime emerges for initially mobile and for initially immobile tracers. For an equilibrium fraction of initially mobile tracers we observe an intermittent ballistic scaling of the MSD. The long-time effective diffusion coefficient is enhanced by advection, which we physically explain with the variance of mobile durations. Finally, we generalize the MIM to incorporate arbitrary immobilisation time distributions and focus on a Mittag-Leffler immobilisation time distribution with power-law tail ~ t^(-1-mu) with 0 100 GeV) instruments such as imaging atmospheric Cherenkov telescopes (IACTs) can play an important role in constraining the main properties of such DM particles, by detecting these products. One of the most privileged targets where to look for DM signal are dwarf spheroidal galaxies (dSphs), as they are expected to be high DM-dominated objects with a clean, gas-free environment. Some dSphs could be considered as extended sources, considering the angular resolution of IACTs; their angu- lar resolution is adequate to detect extended emission from dSphs. For this reason, we performed an extended-source analysis, by taking into account in the unbinned maximum likelihood estimation both the energy and the angular extension dependency of observed events. The goal was to set more constrained upper limits on the velocity-averaged cross-section annihilation of WIMPs with VERITAS data. VERITAS is an array of four IACTs, able to detect γ-ray photons ranging between 100 GeV and 30 TeV. The results of this extended analysis were compared against the traditional spectral analysis. We found that a 2D analysis may lead to more constrained results, depending on the DM mass, channel, and source. Moreover, in this thesis, the results of a multi-instrument project are presented too. Its goal was to combine already published 20 dSphs data from five different experiments, such as Fermi-LAT, MAGIC, H.E.S.S., VERITAS and HAWC, in order to set upper limits on the WIMP annihilation cross-section in the widest mass range ever reported.}, language = {en} } @phdthesis{Das2023, author = {Das, Samata}, title = {Modelling particle acceleration in core-collapse supernova remnants inside circumstellar wind-blown bubbles}, doi = {10.25932/publishup-61414}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-614140}, school = {Universit{\"a}t Potsdam}, pages = {142}, year = {2023}, abstract = {Supernova remnants are considered to be the primary sources of galactic cosmic rays. These cosmic rays are assumed to be accelerated by the diffusive shock acceleration mechanism, specifically at shocks in the remnants. Particularly in the core-collapse scenario, these supernova remnant shocks expand inside the wind-blown bubbles structured by massive progenitors during their lifetime. Therefore, the complex environment of wind bubbles can influence the particle acceleration and radiation from the remnants. Further, the evolution of massive stars depends on their Zero Age Main Sequence mass, rotation, and metallicity. Consequently, the structures of the wind bubbles generated during the lifetime of massive stars should be considerably different. Hence, the particle acceleration in the core-collapse supernova remnants should vary, not only from the remnants evolving in the uniform environment but also from one another, depending on their progenitor stars. A core-collapse supernova remnant with a very massive 60 𝑀 ⊙ progenitor star has been considered to study the particle acceleration at the shock considering Bohm-like diffusion. This dissertation demonstrates the modification in particle acceleration and radiation while the remnant propagates through different regions of the wind bubble by impacts from the profiles of gas density, the temperature of the bubble and the magnetic field structure. Subsequently, in this thesis, I discuss the impacts of the non-identical ambient environment of core-collapse supernova remnants on particle spectra and the non-thermal emissions, considering 20 𝑀 ⊙ and 60 𝑀⊙ massive progenitors having different evolutionary tracks. Additionally, I also analyse the effect of cosmic ray streaming instabilities on particle spectra. To model the particle acceleration in the remnants, I have performed simulations in one-dimensional spherical symmetry using RATPaC code. The transport equation for cosmic rays and magnetic turbulence in test-particle approximation, along with the induction equation for the evolution of the large-scale magnetic field, have been solved simultaneously with the hydrodynamic equations for the expansion of remnants inside the pre-supernova circumstellar medium. The results from simulations describe that the spectra of accelerated particles in supernova remnants are regulated by density fluctuations, temperature variations, the large-scale magnetic field configuration and scattering turbulence. Although the diffusive shock acceleration mechanism at supernova remnant shock predicts the spectral index of 2 for the accelerated non-thermal particles, I have obtained the particle spectra that deviate from this prediction, in the core-collapse scenario. I have found that the particle spectral index reaches 2.5 for the supernova remnant with 60 𝑀 ⊙ progenitor when the remnant resides inside the shocked wind region of the wind bubble, and this softness persists at later evolutionary stages even with Bohm-like diffusion for accelerated particles. However, the supernova remnant with 20 𝑀 ⊙ progenitor does not demonstrate persistent softness in particle spectra from the influence of the hydrodynamics of the corresponding wind bubble. At later stages of evolution, the particle spectra illustrate softness at higher energies for both remnants as the consequence of the escape of high-energy particles from the remnants while considering the cosmic ray streaming instabilities. Finally, I have probed the emission morphology of remnants that varies depending on the progenitors, particularly in earlier evolutionary stages. This dissertation provides insight into different core-collapse remnants expanding inside wind bubbles, for instance, the calculated gamma-ray spectral index from the supernova remnant with 60 𝑀 ⊙ progenitor at later evolutionary stages is consistent with that of the observed supernova remnants expanding in dense molecular clouds.}, language = {en} } @phdthesis{Pfrang2023, author = {Pfrang, Konstantin Johannes}, title = {Search for light primordial black holes with VERITAS using gamma γ-ray and optical observations}, doi = {10.25932/publishup-58726}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-587266}, school = {Universit{\"a}t Potsdam}, pages = {139}, year = {2023}, abstract = {The Very Energetic Radiation Imaging Telescope Array System (VERITAS) is an array of four imaging atmospheric Cherenkov telescopes (IACTs). VERITAS is sensitive to very-high-energy gamma-rays in the range of 100 GeV to >30 TeV. Hypothesized primordial black holes (PBHs) are attractive targets for IACTs. If they exist, their potential cosmological impact reaches beyond the candidacy for constituents of dark matter. The sublunar mass window is the largest unconstrained range of PBH masses. This thesis aims to develop novel concepts searching for light PBHs with VERITAS. PBHs below the sublunar window lose mass due to Hawking radiation. They would evaporate at the end of their lifetime, leading to a short burst of gamma-rays. If PBHs formed at about 10^15 g, the evaporation would occur nowadays. Detecting these signals might not only confirm the existence of PBHs but also prove the theory of Hawking radiation. This thesis probes archival VERITAS data recorded between 2012 and 2021 for possible PBH signals. This work presents a new automatic approach to assess the quality of the VERITAS data. The array-trigger rate and far infrared temperature are well suited to identify periods with poor data quality. These are masked by time cuts to obtain a consistent and clean dataset which contains about 4222 hours. The PBH evaporations could occur at any location in the field of view or time within this data. Only a blind search can be performed to identify these short signals. This thesis implements a data-driven deep learning based method to search for short transient signals with VERITAS. It does not depend on the modelling of the effective area and radial acceptance. This work presents the first application of this method to actual observational IACT data. This thesis develops new concepts dealing with the specifics of the data and the transient detection method. These are reflected in the developed data preparation pipeline and search strategies. After correction for trial factors, no candidate PBH evaporation is found in the data. Thus, new constraints of the local rate of PBH evaporations are derived. At the 99\% confidence limit it is below <1.07 * 10^5 pc^-3 yr^-1. This constraint with the new, independent analysis approach is in the range of existing limits for the evaporation rate. This thesis also investigates an alternative novel approach to searching for PBHs with IACTs. Above the sublunar window, the PBH abundance is constrained by optical microlensing studies. The sampling speed, which is of order of minutes to hours for traditional optical telescopes, is a limiting factor in expanding the limits to lower masses. IACTs are also powerful instruments for fast transient optical astronomy with up to O(ns) sampling. This thesis investigates whether IACTs might constrain the sublunar window with optical microlensing observations. This study confirms that, in principle, the fast sampling speed might allow extending microlensing searches into the sublunar mass window. However, the limiting factor for IACTs is the modest sensitivity to detect changes in optical fluxes. This thesis presents the expected rate of detectable events for VERITAS as well as prospects of possible future next-generation IACTs. For VERITAS, the rate of detectable microlensing events in the sublunar range is ~10^-6 per year of observation time. The future prospects for a 100 times more sensitive instrument are at ~0.05 events per year.}, language = {en} } @phdthesis{Kanehira2023, author = {Kanehira, Yuya}, title = {Versatile DNA origami based SERS substrates for spectroscopic applications}, pages = {115}, year = {2023}, language = {en} } @phdthesis{Braun2023, author = {Braun, Tobias}, title = {Recurrences in past climates}, doi = {10.25932/publishup-58690}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-586900}, school = {Universit{\"a}t Potsdam}, pages = {xxviii, 251}, year = {2023}, abstract = {Our ability to predict the state of a system relies on its tendency to recur to states it has visited before. Recurrence also pervades common intuitions about the systems we are most familiar with: daily routines, social rituals and the return of the seasons are just a few relatable examples. To this end, recurrence plots (RP) provide a systematic framework to quantify the recurrence of states. Despite their conceptual simplicity, they are a versatile tool in the study of observational data. The global climate is a complex system for which an understanding based on observational data is not only of academical relevance, but vital for the predurance of human societies within the planetary boundaries. Contextualizing current global climate change, however, requires observational data far beyond the instrumental period. The palaeoclimate record offers a valuable archive of proxy data but demands methodological approaches that adequately address its complexities. In this regard, the following dissertation aims at devising novel and further developing existing methods in the framework of recurrence analysis (RA). The proposed research questions focus on using RA to capture scale-dependent properties in nonlinear time series and tailoring recurrence quantification analysis (RQA) to characterize seasonal variability in palaeoclimate records ('Palaeoseasonality'). In the first part of this thesis, we focus on the methodological development of novel approaches in RA. The predictability of nonlinear (palaeo)climate time series is limited by abrupt transitions between regimes that exhibit entirely different dynamical complexity (e.g. crossing of 'tipping points'). These possibly depend on characteristic time scales. RPs are well-established for detecting transitions and capture scale-dependencies, yet few approaches have combined both aspects. We apply existing concepts from the study of self-similar textures to RPs to detect abrupt transitions, considering the most relevant time scales. This combination of methods further results in the definition of a novel recurrence based nonlinear dependence measure. Quantifying lagged interactions between multiple variables is a common problem, especially in the characterization of high-dimensional complex systems. The proposed 'recurrence flow' measure of nonlinear dependence offers an elegant way to characterize such couplings. For spatially extended complex systems, the coupled dynamics of local variables result in the emergence of spatial patterns. These patterns tend to recur in time. Based on this observation, we propose a novel method that entails dynamically distinct regimes of atmospheric circulation based on their recurrent spatial patterns. Bridging the two parts of this dissertation, we next turn to methodological advances of RA for the study of Palaeoseasonality. Observational series of palaeoclimate 'proxy' records involve inherent limitations, such as irregular temporal sampling. We reveal biases in the RQA of time series with a non-stationary sampling rate and propose a correction scheme. In the second part of this thesis, we proceed with applications in Palaeoseasonality. A review of common and promising time series analysis methods shows that numerous valuable tools exist, but their sound application requires adaptions to archive-specific limitations and consolidating transdisciplinary knowledge. Next, we study stalagmite proxy records from the Central Pacific as sensitive recorders of mid-Holocene El Ni{\~n}o-Southern Oscillation (ENSO) dynamics. The records' remarkably high temporal resolution allows to draw links between ENSO and seasonal dynamics, quantified by RA. The final study presented here examines how seasonal predictability could play a role for the stability of agricultural societies. The Classic Maya underwent a period of sociopolitical disintegration that has been linked to drought events. Based on seasonally resolved stable isotope records from Yok Balum cave in Belize, we propose a measure of seasonal predictability. It unveils the potential role declining seasonal predictability could have played in destabilizing agricultural and sociopolitical systems of Classic Maya populations. The methodological approaches and applications presented in this work reveal multiple exciting future research avenues, both for RA and the study of Palaeoseasonality.}, language = {en} } @phdthesis{Meyer2023, author = {Meyer, Dominique M.-A.}, title = {The circumstellar medium of massive stars}, school = {Universit{\"a}t Potsdam}, pages = {318}, year = {2023}, language = {en} } @phdthesis{HerreroAlonso2023, author = {Herrero Alonso, Yohana}, title = {Properties of high-redshift galaxies in different environments}, doi = {10.25932/publishup-61328}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-613288}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 114}, year = {2023}, abstract = {The Lyman-𝛼 (Ly𝛼) line commonly assists in the detection of high-redshift galaxies, the so-called Lyman-alpha emitters (LAEs). LAEs are useful tools to study the baryonic matter distribution of the high-redshift universe. Exploring their spatial distribution not only reveals the large-scale structure of the universe at early epochs, but it also provides an insight into the early formation and evolution of the galaxies we observe today. Because dark matter halos (DMHs) serve as sites of galaxy formation, the LAE distribution also traces that of the underlying dark matter. However, the details of this relation and their co-evolution over time remain unclear. Moreover, theoretical studies predict that the spatial distribution of LAEs also impacts their own circumgalactic medium (CGM) by influencing their extended Ly𝛼 gaseous halos (LAHs), whose origin is still under investigation. In this thesis, I make several contributions to improve the knowledge on these fields using samples of LAEs observed with the Multi Unit Spectroscopic Explorer (MUSE) at redshifts of 3 < 𝑧 < 6.}, language = {en} } @phdthesis{Smirnov2023, author = {Smirnov, Artem}, title = {Understanding the dynamics of the near-earth space environment utilizing long-term satellite observations}, doi = {10.25932/publishup-61371}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-613711}, school = {Universit{\"a}t Potsdam}, pages = {xxxvi, 286}, year = {2023}, abstract = {The near-Earth space environment is a highly complex system comprised of several regions and particle populations hazardous to satellite operations. The trapped particles in the radiation belts and ring current can cause significant damage to satellites during space weather events, due to deep dielectric and surface charging. Closer to Earth is another important region, the ionosphere, which delays the propagation of radio signals and can adversely affect navigation and positioning. In response to fluctuations in solar and geomagnetic activity, both the inner-magnetospheric and ionospheric populations can undergo drastic and sudden changes within minutes to hours, which creates a challenge for predicting their behavior. Given the increasing reliance of our society on satellite technology, improving our understanding and modeling of these populations is a matter of paramount importance. In recent years, numerous spacecraft have been launched to study the dynamics of particle populations in the near-Earth space, transforming it into a data-rich environment. To extract valuable insights from the abundance of available observations, it is crucial to employ advanced modeling techniques, and machine learning methods are among the most powerful approaches available. This dissertation employs long-term satellite observations to analyze the processes that drive particle dynamics, and builds interdisciplinary links between space physics and machine learning by developing new state-of-the-art models of the inner-magnetospheric and ionospheric particle dynamics. The first aim of this thesis is to investigate the behavior of electrons in Earth's radiation belts and ring current. Using ~18 years of electron flux observations from the Global Positioning System (GPS), we developed the first machine learning model of hundreds-of-keV electron flux at Medium Earth Orbit (MEO) that is driven solely by solar wind and geomagnetic indices and does not require auxiliary flux measurements as inputs. We then proceeded to analyze the directional distributions of electrons, and for the first time, used Fourier sine series to fit electron pitch angle distributions (PADs) in Earth's inner magnetosphere. We performed a superposed epoch analysis of 129 geomagnetic storms during the Van Allen Probes era and demonstrated that electron PADs have a strong energy-dependent response to geomagnetic activity. Additionally, we showed that the solar wind dynamic pressure could be used as a good predictor of the PAD dynamics. Using the observed dependencies, we created the first PAD model with a continuous dependence on L, magnetic local time (MLT) and activity, and developed two techniques to reconstruct near-equatorial electron flux observations from low-PA data using this model. The second objective of this thesis is to develop a novel model of the topside ionosphere. To achieve this goal, we collected observations from five of the most widely used ionospheric missions and intercalibrated these data sets. This allowed us to use these data jointly for model development, validation, and comparison with other existing empirical models. We demonstrated, for the first time, that ion density observations by Swarm Langmuir Probes exhibit overestimation (up to ~40-50\%) at low and mid-latitudes on the night side, and suggested that the influence of light ions could be a potential cause of this overestimation. To develop the topside model, we used 19 years of radio occultation (RO) electron density profiles, which were fitted with a Chapman function with a linear dependence of scale height on altitude. This approximation yields 4 parameters, namely the peak density and height of the F2-layer and the slope and intercept of the linear scale height trend, which were modeled using feedforward neural networks (NNs). The model was extensively validated against both RO and in-situ observations and was found to outperform the International Reference Ionosphere (IRI) model by up to an order of magnitude. Our analysis showed that the most substantial deviations of the IRI model from the data occur at altitudes of 100-200 km above the F2-layer peak. The developed NN-based ionospheric model reproduces the effects of various physical mechanisms observed in the topside ionosphere and provides highly accurate electron density predictions. This dissertation provides an extensive study of geospace dynamics, and the main results of this work contribute to the improvement of models of plasma populations in the near-Earth space environment.}, language = {en} } @phdthesis{Sajedi2023, author = {Sajedi, Maryam}, title = {Investigation of metal-halide-perovskites by state-of-the-art synchrotron-radiation methods}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 149}, year = {2023}, abstract = {My thesis chiefly aims to shed light on the favourable properties of LHP semiconductors from the point of view of their electronic structure. Currently, various hypotheses are circulating to explain the exceptionally favourable transport properties of LHPs. Seeking an explanation for the low non-radiative recombination rates and long carrier lifetimes is particularly interesting to the halide perovskites research community. The first part of this work investigates the two main hypotheses that are believed to play a significant role: the existence of a giant Rashba effect and large polarons. The experimental method of ARPES is mainly applied to verify their credibility. The first hypothesis presumes that a giant Rashba effect restricts the recombination losses of the charge carriers by making the band gap slightly indirect. The Rashba effect is based on a strong SOC that could appear in LHPs thanks to incorporating the heavy element Pb in their structure. Earlier experimental work had pointed out this effect at the VBM of a hybrid LHP as a viable explanation for the long lifetimes of the charge carriers. My systematic ARPES studies on hybrid MAPbBr3 and spin-resolved ARPES studies on the inorganic CsPbBr3 disprove the presence of any Rashba effect in the VBM of the reported order of magnitude. Therefore, neither the spin texture nor an indirect band gap character at the VBM in the bulk or at the surface can explain the high efficiency of LHP. In case of existence, this effect is in terms of the Rashba parameter at least a factor of a hundred smaller than previously assumed. The second hypothesis proposes large polaron formation in the electronic structure of LHPs and attributes it to their high defect tolerance and low non-radiative recombination rate. Because the perovskite structure consists of negative and positive ions, polarons of this kind can be expected due to the Coulomb interaction between carriers and the polar lattice at intermediate electron-phonon coupling strength. Their existence is proposed to screen the carriers and defects to avoid recombination and trapping, thus leading to long carrier lifetimes. ARPES results by one group supported this assumption, reporting a 50\% effective mass enhancement over the theoretical effective mass for CsPbBr3 in the orthorhombic structure. The current thesis examines this hypothesis experimentally by photon-energy-dependent ARPES spectra and theoretically by GW band calculations of CsPbBr3 perovskites. The investigation is based on the fact that a polaron contribution in charge transport can become evident by an increase of the effective mass as measured by ARPES over the calculated one without polaron effects. However, my experiments on crystalline CsPbBr3 did not imply a larger effective mass for which one could postulate large polarons. In fact, the effective masses determined from ARPES agree with that of theoretical predictions. The second part of my thesis thoroughly investigates the possibility of spontaneously magnetizing LHPs by introducing Mn2+ ions. Mn doping was reported to cause ferromagnetism in one of the most common LHPs, MAPbI3, mediated by super-exchange. The current work investigates the magnetic properties of a wide concentration range of Mn-doped MAPbI3 and triple-cation films by XAS, XMCD, and SQUID measurements. Based on the XAS line shape and a sum-rule analysis of the XMCD spectra, a pure Mn2+ configuration has been confirmed. Negative Curie temperatures are extracted from fitting the magnetization with a Curie-Weiss law. However, a remanent magnetization, which would be an indication of the absence of ferromagnetism down to 2K. As far as the double exchange is concerned, the element-specific XAS excludes a sufficient amount of Mn3+ as a prerequisite for this mechanism. All the findings show no evidence of significant double exchange or ferromagnetism in Mn-doped LHPs. The magnetic behavior is paramagnetic rather than ferromagnetic. In the dissertation's last chapter, orthorhombic features of CsPbBr3 are revealed by ARPES, including an extra VBM at the Γ-point. The VBM of CsPbBr3 shows a temperature-dependent splitting, which decreases by 190 meV between 38K and 300K and tracks a shift of a saddle point at the cubic M-point. It is possible to reproduce the energy shift using an atomic model with a larger unit cell for room temperature, allowing local inversion symmetry breaking. This indicates the importance of electric dipoles for the inorganic LHPs, which may contribute to their high efficiency by breaking inversion symmetry and a Berry-phase effect.}, language = {en} } @phdthesis{Maiti2023, author = {Maiti, Snehanshu}, title = {Magnetohydrodynamic turbulence and cosmic ray transport}, doi = {10.25932/publishup-58903}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-589030}, school = {Universit{\"a}t Potsdam}, pages = {vii, 81}, year = {2023}, abstract = {The first part of the thesis studies the properties of fast mode in magneto hydro-dynamic (MHD) turbulence. 1D and 3D numerical simulations are carried out to generate decaying fast mode MHD turbulence. The injection of waves are carried out in a collinear and isotropic fashion to generate fast mode turbulence. The properties of fast mode turbulence are analyzed by studying their energy spectral density, 2D structure functions and energy decay/cascade time. The injection wave vector is varied to study the dependence of the above properties on the injection wave vectors. The 1D energy spectrum obtained for the velocity and magnetic fields has 𝐸 (𝑘) ∝ 𝑘-2. The 2D energy spectrum and 2D structure functions in parallel and perpendicular directions shows that fast mode turbulence generated is isotropic in nature. The cascade/decay rate of fast mode MHD turbulence is proportional to 𝑘-0.5 for different kinds of wave vector injection. Simulations are also carried out in 1D and 3D to compare balanced and imbalanced turbulence. The results obtained shows that while 1D imbalanced turbulence decays faster than 1D balanced turbulence, there is no difference in the decay of 3D balanced and imbalanced turbulence for the current resolution of 512 grid points. "The second part of the thesis studies cosmic ray (CR) transport in driven MHD turbulence and is strongly dependent on it's properties. Test particle simulations are carried out to study CR interaction with both total MHD turbulence and decomposed MHD modes. The spatial diffusion coefficients and the pitch angle scattering diffusion coefficients are calculated from the test particle trajectories in turbulence. The results confirms that the fast modes dominate the CR propagation, whereas Alfv{\´e}n, slow modes are much less efficient with similar pitch angle scattering rates. The cross field transport on large and small scales are investigated next. On large/global scales, normal diffusion is observed and the diffusion coefficient is suppressed by 𝑀𝜁𝐴 compared to the parallel diffusion coefficients, with 𝜁 closer to 4 in Alfv{\´e}n modes than that in total turbulence as theoretically expected. For the CR transport on scales smaller than the turbulence injection scale 𝐿, both the local and global magnetic reference frames are adopted. Super diffusion is observed on such small scales in all the cases. Particularly, CR transport in Alfv{\´e}n modes show clear Richardson diffusion in the local reference frame. The diffusion transition smoothly from the Richardson's one with index 1.5 to normal diffusion as particle's mean free path decreases from 𝜆∥ ≫ 𝐿 to 𝜆∥ ≪ 𝐿. These results have broad applications to CRs in various astrophysical environments".}, language = {en} } @article{PranavHultzschMusiienkoetal.2023, author = {Pranav, Manasi and Hultzsch, Thomas and Musiienko, Artem and Sun, Bowen and Shukla, Atul and Jaiser, Frank and Shoaee, Safa and Neher, Dieter}, title = {Anticorrelated photoluminescence and free charge generation proves field-assisted exciton dissociation in low-offset PM6:Y5 organic solar cells}, series = {APL materials : high impact open access journal in functional materials science}, volume = {11}, journal = {APL materials : high impact open access journal in functional materials science}, number = {6}, publisher = {AIP Publishing}, address = {Melville}, issn = {2166-532X}, doi = {10.1063/5.0151580}, pages = {8}, year = {2023}, abstract = {Understanding the origin of inefficient photocurrent generation in organic solar cells with low energy offset remains key to realizing high-performance donor-acceptor systems. Here, we probe the origin of field-dependent free-charge generation and photoluminescence in wnon-fullereneacceptor (NFA)-based organic solar cells using the polymer PM6 and the NFA Y5-a non-halogenated sibling to Y6, with a smaller energetic offset to PM6. By performing time-delayed collection field (TDCF) measurements on a variety of samples with different electron transport layers and active layer thickness, we show that the fill factor and photocurrent are limited by field-dependent free charge generation in the bulk of the blend. We also introduce a new method of TDCF called m-TDCF to prove the absence of artifacts from non-geminate recombination of photogenerated and dark charge carriers near the electrodes. We then correlate free charge generation with steady-state photoluminescence intensity and find perfect anticorrelation between these two properties. Through this, we conclude that photocurrent generation in this low-offset system is entirely controlled by the field-dependent dissociation of local excitons into charge-transfer states. (c) 2023 Author(s).}, language = {en} } @article{HovhannisyanNematiHenkeletal.2023, author = {Hovhannisyan, Karen V. and Nemati, Somayyeh and Henkel, Carsten and Anders, Janet}, title = {Long-time equilibration can determine transient thermality}, series = {PRX Quantum}, volume = {4}, journal = {PRX Quantum}, number = {3}, publisher = {American Physical Society}, address = {College Park}, issn = {2691-3399}, doi = {10.1103/PRXQuantum.4.030321}, pages = {23}, year = {2023}, abstract = {When two initially thermal many-body systems start to interact strongly, their transient states quickly become non-Gibbsian, even if the systems eventually equilibrate. To see beyond this apparent lack of structure during the transient regime, we use a refined notion of thermality, which we call g-local. A system is g-locally thermal if the states of all its small subsystems are marginals of global thermal states. We numerically demonstrate for two harmonic lattices that whenever the total system equilibrates in the long run, each lattice remains g-locally thermal at all times, including the transient regime. This is true even when the lattices have long-range interactions within them. In all cases, we find that the equilibrium is described by the generalized Gibbs ensemble, with three-dimensional lattices requiring special treatment due to their extended set of conserved charges. We compare our findings with the well-known two-temperature model. While its standard form is not valid beyond weak coupling, we show that at strong coupling it can be partially salvaged by adopting the concept of a g-local temperature.}, language = {en} } @phdthesis{Damle2023, author = {Damle, Mitali}, title = {Gas distribution around galaxies in cosmological simulations}, doi = {10.25932/publishup-59054}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-590543}, school = {Universit{\"a}t Potsdam}, pages = {ii, xii, 146}, year = {2023}, abstract = {The evolution of a galaxy is pivotally governed by its pattern of star formation over a given period of time. The star formation rate at any given time is strongly dependent on the amount of cold gas available in the galaxy. Accretion of pristine gas from the Intergalactic medium (IGM) is thought to be one of the primary sources for star-forming gas. This gas first passes through the virial regions of the galaxy before reaching the Interstellar medium (ISM), the hub of star formation. On the other hand, owing to the evolutionary course of young and massive stars, energetic winds are ejected from the ISM to the virial regions of the galaxy. A bunch of interlinked, complex astrophysical processes, arising from the concurrent presence of both infalling as well as outbound gas, play out over a range of timescales in the halo region or the Circumgalactic medium (CGM) of a galaxy. It would not be incorrect to say that the CGM has a stronghold over the gas reserves of a galaxy and thus, plays a backhand, yet, rather pivotal role in shaping many galactic properties, some of which are also readily observable. Observing the multi-phase CGM (via spectral-line ion measurements), however, remains a non-trivial effort even today. Low particle densities as well as the CGM's vast spatial extent, coupled with likely deviations from a spherical distribution, marr the possibility of obtaining complete, unbiased, high-quality spectral information tracing the full extent of the gaseous halo. This often incomplete information leads to multiple inferences about the CGM properties that give rise to multiple contradicting models. In this regard, computer simulations offer a neat solution towards testing and, subsequently, falsifying many of these existing CGM models. Thanks to their controlled environments, simulations are able to not only effortlessly transcend several orders of magnitude in time and space, but also get around many of the observational limitations and provide some unique views on many CGM properties. In this thesis, I focus on effectively using different computer simulations to understand the role of CGM in various astrophysical contexts, namely, the effect of Local Group (LG) environment, major merger events and satellite galaxies. In Chapter 2, I discuss the approach used for modeling various phases of the simulated z = 0 LG CGM in Hestia constrained simulations. Each of the three realizations contain a Milky Way (MW)-Andromeda (M31) galaxy pair, along with their corresponding sets of satellite galaxies, all embedded within the larger cosmological context. For characterizing the different temperature-density phases within the CGM, I model five tracer ions with cloudy ionization modeling. The cold and cool-ionized CGM (H i and Si iii respectively) in Hestia is very clumpy and distributed close to the galactic centers, while the warm-hot and hot CGM (O vi, O vii and O viii) is tenuous and volume-filling. On comparing the H i and Si iii column densities for the simulated M31 with observational measurements from Project AMIGA survey and other low-z galaxies, I found that Hestia galaxies produced less gas in the outer CGM, unlike observations. My carefully designed observational bias model subsequently revealed the possibility that some MW gas clouds might be incorrectly associated with the M31 CGM in observations, and hence, may be partly responsible for giving rise to the detected mismatch between simulated data and observations. In Chapter 3, I present results from four zoom-in, major merger, gas-rich simulations and the subsequent role of the gas, originally situated in the CGM, in influencing some of the galactic observables. The progenitor parameters are selected such that the post-merger remnants are MW-mass galaxies. We generally see a very clear gas bridge joining the merging galaxies in case of multiple passage mergers while such a bridge is mostly absent when a direct collision occurs. On the basis of particle-to-galaxy distance computations and tracer particle analysis, I found that about 33-48 percent of the cold gas contributing to the merger-induced star formation in the bridge originated from the CGM regions. In Chapter 4, I used a sample of 234 MW-mass, L* galaxies from the TNG50 cosmological simulations, with an aim of characterizing the impact of their global satellite populations on the extended cold CGM properties of their host L* halos. On the basis of halo mass and number of satellite galaxies (N_sats ), I categorized the sample into low and high mass bins, and subsequently into bottom, inter and top quartiles respectively. After confirming that satellites indeed influence the extended cold halo gas density profiles of the host galaxies, I investigated the effects of different satellite population parameters on the host halo cold CGMs. My analysis showed that there is hardly any cold gas associated with the satellite population of the lowest mass halos. The stellar mass of the most massive satellite (M_*mms ) impacted the cold gas in low mass bin halos the most, while N_sats (followed by M_*mms ) was the most influential factor for the high mass halos. In any case, how easily cold gas was stripped off the most massive satellite did not play much role. The number of massive (Stellar mass, M* > 10^8 M_solar) satellites as well as the M_*mms associated with a galaxy are two of the most crucial parameters determining how much cold gas ultimately finds its way from the satellites to the host halo. Low mass galaxies are found rather lacking on both these fronts unlike their high mass counterparts. This work highlights some aspects of the complex gas physics that constitute the basic essence of a low-z CGM. My analysis proved the importance of a cosmological environment, local surroundings and merger history in defining some key observable properties of a galactic CGM. Furthermore, I found that different satellite properties were responsible for affecting the cold-dense CGM of the low and high-mass parent galaxies. Finally, the LG emerged as an exciting prospect for testing and pinning down several intricate details about the CGM.}, language = {en} } @phdthesis{Haseeb2023, author = {Haseeb, Haider}, title = {Charge and heat transport across interfaces in nanostructured porous silicon}, doi = {10.25932/publishup-61122}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-611224}, school = {Universit{\"a}t Potsdam}, pages = {84}, year = {2023}, abstract = {This thesis discusses heat and charge transport phenomena in single-crystalline Silicon penetrated by nanometer-sized pores, known as mesoporous Silicon (pSi). Despite the extensive attention given to it as a thermoelectric material of interest, studies on microscopic thermal and electronic transport beyond its macroscopic characterizations are rarely reported. In contrast, this work reports the interplay of both. PSi samples synthesized by electrochemical anodization display a temperature dependence of specific heat 𝐶𝑝 that deviates from the characteristic 𝑇^3 behaviour (at 𝑇<50𝐾). A thorough analysis reveals that both 3D and 2D Einstein and Debye modes contribute to this specific heat. Additional 2D Einstein modes (~3 𝑚𝑒𝑉) agree reasonably well with the boson peak of SiO2 in pSi pore walls. 2D Debye modes are proposed to account for surface acoustic modes causing a significant deviation from the well-known 𝑇^3 dependence of 𝐶𝑝 at 𝑇<50𝐾. A novel theoretical model gives insights into the thermal conductivity of pSi in terms of porosity and phonon scattering on the nanoscale. The thermal conductivity analysis utilizes the peculiarities of the pSi phonon dispersion probed by the inelastic neutron scattering experiments. A phonon mean-free path of around 10 𝑛𝑚 extracted from the presented model is proposed to cause the reduced thermal conductivity of pSi by two orders of magnitude compared to p-doped bulk Silicon. Detailed analysis indicates that compound averaging may cause a further 10-50\% reduction. The percolation threshold of 65\% for thermal conductivity of pSi samples is subsequently determined by employing theoretical effective medium models. Temperature-dependent electrical conductivity measurements reveal a thermally activated transport process. A detailed analysis of the activation energy 𝐸𝐴𝜎 in the thermally activated transport exhibits a Meyer Neldel compensation rule between different samples that originates in multi-phonon absorption upon carrier transport. Activation energies 𝐸𝐴𝑆 obtained from temperature-dependent thermopower measurements provide further evidence for multi-phonon assisted hopping between localized states as a dominant charge transport mechanism in pSi, as they systematically differ from the determined 𝐸𝐴𝜎 values.}, language = {en} } @article{JaiserAkperovTimazhevetal.2023, author = {Jaiser, Ralf and Akperov, Mirseid and Timazhev, A. and Romanowsky, Erik and Handorf, D{\"o}rthe and Mokhov, I. I.}, title = {Linkages between arctic and mid-latitude weather and climate}, series = {Meteorologische Zeitschrift}, volume = {32}, journal = {Meteorologische Zeitschrift}, number = {3}, publisher = {Schweizerbart}, address = {Stuttgart}, issn = {0941-2948}, doi = {10.1127/metz/2023/1154}, pages = {173 -- 194}, year = {2023}, abstract = {The study addresses the question, if observed changes in terms of Arctic-midlatitude linkages during winter are driven by Arctic Sea ice decline alone or if the increase of global sea surface temperatures plays an additional role. We compare atmosphere-only model experiments with ECHAM6 to ERA-Interim Reanalysis data. The model sensitivity experiment is implemented as a set of four combinations of sea ice and sea surface temperature boundary conditions. Atmospheric circulation regimes are determined and evaluated in terms of their cyclone and blocking characteristics and changes in frequency during winter. As a prerequisite, ECHAM6 reproduces general features of circulation regimes very well. Tropospheric changes induced by the change of boundary conditions are revealed and further impacts on the large-scale circulation up into the stratosphere are investigated. In early winter, the observed increase of atmospheric blocking in the region between Scandinavia and the Urals are primarily related to the changes in sea surface temperatures. During late winter, we f nd a weakened polar stratospheric vortex in the reanalysis that further impacts the troposphere. In the model sensitivity study a climatologically weakened polar vortex occurs only if sea ice is reduced and sea surface temperatures are increased together. This response is delayed compared to the reanalysis. The tropospheric response during late winter is inconclusive in the model, which is potentially related to the weak and delayed response in the stratosphere. The model experiments do not reproduce the connection between early and late winter as interpreted from the reanalysis. Potentially explaining this mismatch, we identify a discrepancy of ECHAM6 to reproduce the weakening of the stratospheric polar vortex through blocking induced upward propagation of planetary waves.}, language = {en} } @misc{MatternPudellDumesniletal.2023, author = {Mattern, Maximilian and Pudell, Jan-Etienne and Dumesnil, Karine and Reppert, Alexander von and Bargheer, Matias}, title = {Towards shaping picosecond strain pulses via magnetostrictive transducers}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1321}, issn = {1866-8372}, doi = {10.25932/publishup-58886}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-588868}, pages = {7}, year = {2023}, abstract = {Using time-resolved x-ray diffraction, we demonstrate the manipulation of the picosecond strain response of a metallic heterostructure consisting of a dysprosium (Dy) transducer and a niobium (Nb) detection layer by an external magnetic field. We utilize the first-order ferromagnetic-antiferromagnetic phase transition of the Dy layer, which provides an additional large contractive stress upon laser excitation compared to its zerofield response. This enhances the laser-induced contraction of the transducer and changes the shape of the picosecond strain pulses driven in Dy and detected within the buried Nb layer. Based on our experiment with rare-earth metals we discuss required properties for functional transducers, which may allow for novel field-control of the emitted picosecond strain pulses.}, language = {en} } @article{MatternReppertZeuschneretal.2023, author = {Mattern, Maximilian and Reppert, Alexander von and Zeuschner, Steffen Peer and Herzog, Marc and Pudell, Jan-Etienne and Bargheer, Matias}, title = {Concepts and use cases for picosecond ultrasonics with x-rays}, series = {Photoacoustics}, volume = {31}, journal = {Photoacoustics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2213-5979}, doi = {10.1016/j.pacs.2023.100503}, pages = {22}, year = {2023}, abstract = {This review discusses picosecond ultrasonics experiments using ultrashort hard x-ray probe pulses to extract the transient strain response of laser-excited nanoscopic structures from Bragg-peak shifts. This method provides direct, layer-specific, and quantitative information on the picosecond strain response for structures down to few-nm thickness. We model the transient strain using the elastic wave equation and express the driving stress using Gruneisen parameters stating that the laser-induced stress is proportional to energy density changes in the microscopic subsystems of the solid, i.e., electrons, phonons and spins. The laser-driven strain response can thus serve as an ultrafast proxy for local energy-density and temperature changes, but we emphasize the importance of the nanoscale morphology for an accurate interpretation due to the Poisson effect. The presented experimental use cases encompass ultrathin and opaque metal-heterostructures, continuous and granular nanolayers as well as negative thermal expansion materials, that each pose a challenge to established all-optical techniques.}, language = {en} } @article{MatternPudellDumesniletal.2023, author = {Mattern, Maximilian and Pudell, Jan-Etienne and Dumesnil, Karine and Reppert, Alexander von and Bargheer, Matias}, title = {Towards shaping picosecond strain pulses via magnetostrictive transducers}, series = {Photoacoustics}, volume = {30}, journal = {Photoacoustics}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2213-5979}, doi = {10.1016/j.pacs.2023.100463}, pages = {7}, year = {2023}, abstract = {Using time-resolved x-ray diffraction, we demonstrate the manipulation of the picosecond strain response of a metallic heterostructure consisting of a dysprosium (Dy) transducer and a niobium (Nb) detection layer by an external magnetic field. We utilize the first-order ferromagnetic-antiferromagnetic phase transition of the Dy layer, which provides an additional large contractive stress upon laser excitation compared to its zerofield response. This enhances the laser-induced contraction of the transducer and changes the shape of the picosecond strain pulses driven in Dy and detected within the buried Nb layer. Based on our experiment with rare-earth metals we discuss required properties for functional transducers, which may allow for novel field-control of the emitted picosecond strain pulses.}, language = {en} } @article{DiBelloHartmannMajumdaretal.2023, author = {Di Bello, Costantino and Hartmann, Alexander K. and Majumdar, Satya N. and Mori, Francesco and Rosso, Alberto and Schehr, Gregory}, title = {Current fluctuations in stochastically resetting particle systems}, series = {Physical review : E, Statistical, nonlinear and soft matter physics}, volume = {108}, journal = {Physical review : E, Statistical, nonlinear and soft matter physics}, number = {1}, publisher = {American Physical Society}, address = {College Park}, issn = {2470-0045}, doi = {10.1103/PhysRevE.108.014112}, pages = {18}, year = {2023}, abstract = {We consider a system of noninteracting particles on a line with initial positions distributed uniformly with density ? on the negative half-line. We consider two different models: (i) Each particle performs independent Brownian motion with stochastic resetting to its initial position with rate r and (ii) each particle performs run -and-tumble motion, and with rate r its position gets reset to its initial value and simultaneously its velocity gets randomized. We study the effects of resetting on the distribution P(Q, t) of the integrated particle current Q up to time t through the origin (from left to right). We study both the annealed and the quenched current distributions and in both cases, we find that resetting induces a stationary limiting distribution of the current at long times. However, we show that the approach to the stationary state of the current distribution in the annealed and the quenched cases are drastically different for both models. In the annealed case, the whole distribution P-an(Q, t) approaches its stationary limit uniformly for all Q. In contrast, the quenched distribution P-qu(Q, t) attains its stationary form for Q < Q(crit)(t), while it remains time dependent for Q > Q(crit)(t). We show that Q(crit)(t) increases linearly with t for large t. On the scale where Q <; Q(crit)(t), we show that P-qu(Q, t) has an unusual large deviation form with a rate function that has a third-order phase transition at the critical point. We have computed the associated rate functions analytically for both models. Using an importance sampling method that allows to probe probabilities as tiny as 10-14000, we were able to compute numerically this nonanalytic rate function for the resetting Brownian dynamics and found excellent agreement with our analytical prediction.}, language = {en} } @phdthesis{Alexoudi2023, author = {Alexoudi, Xanthippi}, title = {Clarifying the discrepant results in the characterization of exoplanetary atmospheres}, doi = {10.25932/publishup-60565}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-605659}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 125}, year = {2023}, abstract = {Planets outside our solar system, so-called "exoplanets", can be detected with different methods, and currently more than 5000 exoplanets have been confirmed, according to NASA Exoplanet Archive. One major highlight of the studies on exoplanets in the past twenty years is the characterization of their atmospheres usingtransmission spectroscopy as the exoplanet transits. However, this characterization is a challenging process and sometimes there are reported discrepancies in the literature regarding the atmosphere of the same exoplanet. One potential reason for the observed atmospheric inconsistencies is called impact parameter degeneracy, and it is highly driven by the limb darkening effect of the host star. A brief introductionto those topics in presented in chapter 1, while the motivation and objectives of thiswork are described in chapter 2.The first goal is to clarify the origin of the transmission spectrum, which is anindicator of an exoplanet's atmosphere; whether it is real or influenced by the impactparameter degeneracy. A second goal is to determine whether photometry from space using the Transiting Exoplanet Survey Satellite (TESS), could improve on the major parameters, which are responsible for the aforementioned degeneracy, of known exoplanetary systems. Three individual projects were conducted in order toaddress those goals. The three manuscripts are presented, in short, in the manuscriptoverview in chapter 3.More specifically, in chapter 4, the first manuscript is presented, which is an ex-tended investigation on the impact parameter degeneracy and its application onsynthetic transmission spectra. Evidently, the limb darkening of the host star isan important driver for this effect. It keeps the degeneracy persisting through different groups of exoplanets, based on the uncertainty of their impact parameter and on the type of their host star. The second goal, was addressed in the second and third manuscripts (chapter 5 and chapter 6 respectively). Using observationsfrom the TESS mission, two samples of exoplanets were studied; 10 transiting inflated hot-Jupiters and 43 transiting grazing systems. Potentially, the refinement or confirmation of their major system parameters' measurements can assist in solving current or future discrepancies regarding their atmospheric characterization.In chapter 7 the conclusions of this work are discussed, while in chapter 8 itis proposed how TESS's measurements can be able to discern between erroneousinterpretations of transmission spectra, especially on systems where the impact parameter degeneracy is likely not applicable.}, language = {en} } @article{MeyerPohlPetrovetal.2023, author = {Meyer, Dominique M.-A. and Pohl, Martin and Petrov, Miroslav and Egberts, Kathrin}, title = {Mixing of materials in magnetized core-collapse supernova remnants}, series = {Monthly notices of the Royal Astronomical Society}, volume = {521}, journal = {Monthly notices of the Royal Astronomical Society}, number = {4}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0035-8711}, doi = {10.1093/mnras/stad906}, pages = {5354 -- 5371}, year = {2023}, abstract = {Core-collapse supernova remnants are structures of the interstellar medium (ISM) left behind the explosive death of most massive stars ( ?40 M-?). Since they result in the expansion of the supernova shock wave into the gaseous environment shaped by the star's wind history, their morphology constitutes an insight into the past evolution of their progenitor star. Particularly, fast-mo ving massiv e stars can produce asymmetric core-collapse superno va remnants. We inv estigate the mixing of materials in core-collapse supernova remnants generated by a moving massive 35 M-? star, in a magnetized ISM. Stellar rotation and the wind magnetic field are time-dependently included into the models which follow the entire evolution of the stellar surroundings from the zero-age main-sequence to 80 kyr after the supernova explosion. It is found that very little main-sequence material is present in remnants from moving stars, that the Wolf-Rayet wind mixes very efficiently within the 10 kyr after the explosion, while the red supergiant material is still unmixed by 30 per cent within 50 kyr after the supernova. Our results indicate that the faster the stellar motion, the more complex the internal organization of the supernova remnant and the more ef fecti ve the mixing of ejecta therein. In contrast, the mixing of stellar wind material is only weakly affected by progenitor motion, if at all.}, language = {en} } @phdthesis{Khosravi2023, author = {Khosravi, Sara}, title = {The effect of new turbulence parameterizations for the stable surface layer on simulations of the Arctic climate}, doi = {10.25932/publishup-64352}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-643520}, school = {Universit{\"a}t Potsdam}, pages = {XIV, 119}, year = {2023}, abstract = {Arctic climate change is marked by intensified warming compared to global trends and a significant reduction in Arctic sea ice which can intricately influence mid-latitude atmospheric circulation through tropo- and stratospheric pathways. Achieving accurate simulations of current and future climate demands a realistic representation of Arctic climate processes in numerical climate models, which remains challenging. Model deficiencies in replicating observed Arctic climate processes often arise due to inadequacies in representing turbulent boundary layer interactions that determine the interactions between the atmosphere, sea ice, and ocean. Many current climate models rely on parameterizations developed for mid-latitude conditions to handle Arctic turbulent boundary layer processes. This thesis focuses on modified representation of the Arctic atmospheric processes and understanding their resulting impact on large-scale mid-latitude atmospheric circulation within climate models. The improved turbulence parameterizations, recently developed based on Arctic measurements, were implemented in the global atmospheric circulation model ECHAM6. This involved modifying the stability functions over sea ice and ocean for stable stratification and changing the roughness length over sea ice for all stratification conditions. Comprehensive analyses are conducted to assess the impacts of these modifications on ECHAM6's simulations of the Arctic boundary layer, overall atmospheric circulation, and the dynamical pathways between the Arctic and mid-latitudes. Through a step-wise implementation of the mentioned parameterizations into ECHAM6, a series of sensitivity experiments revealed that the combined impacts of the reduced roughness length and the modified stability functions are non-linear. Nevertheless, it is evident that both modifications consistently lead to a general decrease in the heat transfer coefficient, being in close agreement with the observations. Additionally, compared to the reference observations, the ECHAM6 model falls short in accurately representing unstable and strongly stable conditions. The less frequent occurrence of strong stability restricts the influence of the modified stability functions by reducing the affected sample size. However, when focusing solely on the specific instances of a strongly stable atmosphere, the sensible heat flux approaches near-zero values, which is in line with the observations. Models employing commonly used surface turbulence parameterizations were shown to have difficulties replicating the near-zero sensible heat flux in strongly stable stratification. I also found that these limited changes in surface layer turbulence parameterizations have a statistically significant impact on the temperature and wind patterns across multiple pressure levels, including the stratosphere, in both the Arctic and mid-latitudes. These significant signals vary in strength, extent, and direction depending on the specific month or year, indicating a strong reliance on the background state. Furthermore, this research investigates how the modified surface turbulence parameterizations may influence the response of both stratospheric and tropospheric circulation to Arctic sea ice loss. The most suitable parameterizations for accurately representing Arctic boundary layer turbulence were identified from the sensitivity experiments. Subsequently, the model's response to sea ice loss is evaluated through extended ECHAM6 simulations with different prescribed sea ice conditions. The simulation with adjusted surface turbulence parameterizations better reproduced the observed Arctic tropospheric warming in vertical extent, demonstrating improved alignment with the reanalysis data. Additionally, unlike the control experiments, this simulation successfully reproduced specific circulation patterns linked to the stratospheric pathway for Arctic-mid-latitude linkages. Specifically, an increased occurrence of the Scandinavian-Ural blocking regime (negative phase of the North Atlantic Oscillation) in early (late) winter is observed. Overall, it can be inferred that improving turbulence parameterizations at the surface layer can improve the ECHAM6's response to sea ice loss.}, language = {en} } @phdthesis{Stoll2022, author = {Stoll, Andreas}, title = {Advanced spectroscopic instruments enabled by integrated optics}, school = {Universit{\"a}t Potsdam}, pages = {97, XV}, year = {2022}, abstract = {The aim of this work is the study of silica Arrayed Waveguide Gratings (AWGs) in the context of applications in astronomy. The specific focus lies on the investigation of the feasibility and technology limits of customized silica AWG devices for high resolution near-infrared spectroscopy. In a series of theoretical and experimental studies, AWG devices of varying geometry, foot-print and spectral resolution are constructed, simulated using a combination of a numerical beam propagation method and Fraunhofer diffraction and fabricated devices are characterized with respect to transmission efficiency, spectral resolution and polarization sensitivity. The impact of effective index non-uniformities on the performance of high-resolution AWG devices is studied numerically. Characterization results of fabricated devices are used to extrapolate the technology limits of the silica platform. The important issues of waveguide birefringence and defocus aberration are discussed theoretically and addressed experimentally by selection of an appropriate aberration-minimizing anastigmatic AWG layout structure. The drawbacks of the anastigmatic AWG geometry are discussed theoretically. From the results of the experimental studies, it is concluded that fabrication-related phase errors and waveguide birefringence are the primary limiting factors for the growth of AWG spectral resolution. It is shown that, without post-processing, the spectral resolving power is phase-error-limited to R < 40, 000 and, in the case of unpolarized light, birefringence-limited to R < 30, 000 in the AWG devices presented in this work. Necessary measures, such as special waveguide geometries and post-fabrication phase error correction are proposed for future designs. The elimination of defocus aberration using an anastigmatic AWG geometry is successfully demonstrated in experiment. Finally, a novel, non-planar dispersive in-fibre waveguide structure is proposed, discussed and studied theoretically.}, language = {en} } @phdthesis{Spaeker2022, author = {Sp{\"a}ker, Oliver C.}, title = {Structure-property-function relationships in the cornea of Limulus polyphemus}, pages = {VIII, 110, A16}, year = {2022}, language = {en} } @article{Fritsch2022, author = {Fritsch, Daniel}, title = {Revisiting the Cu-Zn disorder in kesterite type Cu2ZnSnSe4 employing a novel approach to hybrid functional calculations}, series = {Applied Sciences : open access journal}, volume = {12}, journal = {Applied Sciences : open access journal}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2076-3417}, doi = {10.3390/app12052576}, pages = {10}, year = {2022}, abstract = {In recent years, the search for more efficient and environmentally friendly materials to be employed in the next generation of thin film solar cell devices has seen a shift towards hybrid halide perovskites and chalcogenide materials crystallising in the kesterite crystal structure. Prime examples for the latter are Cu2ZnSnS4, Cu2ZnSnSe4, and their solid solution Cu2ZnSn(SxSe1-x)(4), where actual devices already demonstrated power conversion efficiencies of about 13 \%. However, in their naturally occurring kesterite crystal structure, the so-called Cu-Zn disorder plays an important role and impacts the structural, electronic, and optical properties. To understand the influence of Cu-Zn disorder, we perform first-principles calculations based on density functional theory combined with special quasirandom structures to accurately model the cation disorder. Since the electronic band gaps and derived optical properties are severely underestimated by (semi)local exchange and correlation functionals, supplementary hybrid functional calculations have been performed. Concerning the latter, we additionally employ a recently devised technique to speed up structural relaxations for hybrid functional calculations. Our calculations show that the Cu-Zn disorder leads to a slight increase in the unit cell volume compared to the conventional kesterite structure showing full cation order, and that the band gap gets reduced by about 0.2 eV, which is in very good agreement with earlier experimental and theoretical findings. Our detailed results on structural, electronic, and optical properties will be discussed with respect to available experimental data, and will provide further insights into the atomistic origin of the disorder-induced band gap lowering in these promising kesterite type materials.}, language = {en} } @phdthesis{Velk2022, author = {Velk, Natalia}, title = {Investigation of the interaction of lysozyme with poly(l-lysine)/hyaluronic acid multilayers}, school = {Universit{\"a}t Potsdam}, pages = {85}, year = {2022}, language = {en} } @article{TeichmannLewandowskiAlemani2022, author = {Teichmann, Erik and Lewandowski, Heather J. and Alemani, Micol}, title = {Investigating students' views of experimental physics in German laboratory classes}, series = {Physical Review Physics Education Research}, volume = {18}, journal = {Physical Review Physics Education Research}, edition = {1}, publisher = {APS}, address = {College Park, Maryland, United States}, issn = {1554-9178}, doi = {10.1103/PhysRevPhysEducRes.18.010135}, pages = {010135-1 -- 010135-17}, year = {2022}, abstract = {There is a large variety of goals instructors have for laboratory courses, with different courses focusing on different subsets of goals. An often implicit, but crucial, goal is to develop students' attitudes, views, and expectations about experimental physics to align with practicing experimental physicists. The assessment of laboratory courses upon this one dimension of learning has been intensively studied in U.S. institutions using the Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS). However, there is no such an instrument available to use in Germany, and the influence of laboratory courses on students views about the nature of experimental physics is still unexplored at German-speaking institutions. Motivated by the lack of an assessment tool to investigate this goal in laboratory courses at German-speaking institutions, we present a translated version of the E-CLASS adapted to the context at German-speaking institutions. We call the German version of the E-CLASS, the GE-CLASS. We describe the translation process and the creation of an automated web-based system for instructors to assess their laboratory courses. We also present first results using GE-CLASS obtained at the University of Potsdam. A first comparison between E-CLASS and GE-CLASS results shows clear differences between University of Potsdam and U.S. students' views and beliefs about experimental physics.}, language = {en} } @article{CestnikPikovsky2022, author = {Cestnik, Rok and Pikovsky, Arkady}, title = {Hierarchy of exact low-dimensional reductions for populations of coupled oscillators}, series = {Physical review letters}, volume = {128}, journal = {Physical review letters}, number = {5}, publisher = {American Physical Society}, address = {College Park}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.128.054101}, pages = {6}, year = {2022}, abstract = {We consider an ensemble of phase oscillators in the thermodynamic limit, where it is described by a kinetic equation for the phase distribution density. We propose an Ansatz for the circular moments of the distribution (Kuramoto-Daido order parameters) that allows for an exact truncation at an arbitrary number of modes. In the simplest case of one mode, the Ansatz coincides with that of Ott and Antonsen [Chaos 18, 037113 (2008)]. Dynamics on the extended manifolds facilitate higher-dimensional behavior such as chaos, which we demonstrate with a simulation of a Josephson junction array. The findings are generalized for oscillators with a Cauchy-Lorentzian distribution of natural frequencies.}, language = {en} } @article{SarabadaniMetzlerAlaNissila2022, author = {Sarabadani, Jalal and Metzler, Ralf and Ala-Nissila, Tapio}, title = {Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations}, series = {Physical Review Research}, volume = {4}, journal = {Physical Review Research}, edition = {3}, publisher = {American Physical Society}, address = {College Park, Maryland, USA}, issn = {2643-1564}, doi = {10.1103/PhysRevResearch.4.033003}, pages = {033003-1 -- 033003-14}, year = {2022}, abstract = {Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = -1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = -1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity.}, language = {en} } @article{SposiniKrapfMarinarietal.2022, author = {Sposini, Vittoria and Krapf, Diego and Marinari, Enzo and Sunyer, Raimon and Ritort, Felix and Taheri, Fereydoon and Selhuber-Unkel, Christine and Benelli, Rebecca and Weiss, Matthias and Metzler, Ralf and Oshanin, Gleb}, title = {Towards a robust criterion of anomalous diffusion}, series = {Communications Physics}, volume = {5}, journal = {Communications Physics}, publisher = {Springer Nature}, address = {London}, issn = {2399-3650}, doi = {10.1038/s42005-022-01079-8}, pages = {10}, year = {2022}, abstract = {Anomalous-diffusion, the departure of the spreading dynamics of diffusing particles from the traditional law of Brownian-motion, is a signature feature of a large number of complex soft-matter and biological systems. Anomalous-diffusion emerges due to a variety of physical mechanisms, e.g., trapping interactions or the viscoelasticity of the environment. However, sometimes systems dynamics are erroneously claimed to be anomalous, despite the fact that the true motion is Brownian—or vice versa. This ambiguity in establishing whether the dynamics as normal or anomalous can have far-reaching consequences, e.g., in predictions for reaction- or relaxation-laws. Demonstrating that a system exhibits normal- or anomalous-diffusion is highly desirable for a vast host of applications. Here, we present a criterion for anomalous-diffusion based on the method of power-spectral analysis of single trajectories. The robustness of this criterion is studied for trajectories of fractional-Brownian-motion, a ubiquitous stochastic process for the description of anomalous-diffusion, in the presence of two types of measurement errors. In particular, we find that our criterion is very robust for subdiffusion. Various tests on surrogate data in absence or presence of additional positional noise demonstrate the efficacy of this method in practical contexts. Finally, we provide a proof-of-concept based on diverse experiments exhibiting both normal and anomalous-diffusion.}, language = {en} } @article{LopezdeGuerenuKurganovaKlierHaubitzetal.2022, author = {L{\´o}pez de Guere{\~n}u Kurganova, Anna and Klier, Dennis Tobias and Haubitz, Toni and Kumke, Michael Uwe}, title = {Influence of Gd3+ doping concentration on the properties of Na(Y,Gd)F-4}, series = {Photochemical \& photobiological sciences / European Society for Photobiology}, volume = {21}, journal = {Photochemical \& photobiological sciences / European Society for Photobiology}, number = {2}, publisher = {Springer}, address = {Heidelberg}, issn = {1474-905X}, doi = {10.1007/s43630-021-00161-4}, pages = {235 -- 245}, year = {2022}, abstract = {We present a systematic study on the properties of Na(Y,Gd)F-4-based upconverting nanoparticles (UCNP) doped with 18\% Yb3+, 2\% Tm3+, and the influence of Gd3+ (10-50 mol\% Gd3+). UCNP were synthesized via the solvothermal method and had a range of diameters within 13 and 50 nm. Structural and photophysical changes were monitored for the UCNP samples after a 24-month incubation period in dry phase and further redispersion. Structural characterization was performed by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) as well as dynamic light scattering (DLS), and the upconversion luminescence (UCL) studies were executed at various temperatures (from 4 to 295 K) using time-resolved and steady-state spectroscopy. An increase in the hexagonal lattice phase with the increase of Gd3+ content was found, although the cubic phase was prevalent in most samples. The Tm3+-luminescence intensity as well as the Tm3+-luminescence decay times peaked at the Gd3+ concentration of 30 mol\%. Although the general upconverting luminescence properties of the nanoparticles were preserved, the 24-month incubation period lead to irreversible agglomeration of the UCNP and changes in luminescence band ratios and lifetimes.}, language = {en} } @article{SecklerMetzler2022, author = {Seckler, Henrik and Metzler, Ralf}, title = {Bayesian deep learning for error estimation in the analysis of anomalous diffusion}, series = {Nature Communnications}, volume = {13}, journal = {Nature Communnications}, publisher = {Nature Publishing Group UK}, address = {London}, issn = {2041-1723}, doi = {10.1038/s41467-022-34305-6}, pages = {13}, year = {2022}, abstract = {Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusionmodel and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a wellcalibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output.}, language = {en} } @article{MayerLeverGuehr2022, author = {Mayer, Dennis and Lever, Fabiano and G{\"u}hr, Markus}, title = {Data analysis procedures for time-resolved x-ray photoelectron spectroscopy at a SASE free-electron-laser}, series = {Journal of physics : B, Atomic, molecular and optical physics}, volume = {55}, journal = {Journal of physics : B, Atomic, molecular and optical physics}, number = {5}, publisher = {IOP Publ.}, address = {Bristol}, issn = {0953-4075}, doi = {10.1088/1361-6455/ac3c91}, pages = {9}, year = {2022}, abstract = {The random nature of self-amplified spontaneous emission (SASE) is a well-known challenge for x-ray core level spectroscopy at SASE free-electron lasers (FELs). Especially in time-resolved experiments that require a combination of good temporal and spectral resolution the jitter and drifts in the spectral characteristics, relative arrival time as well as power fluctuations can smear out spectral-temporal features. We present a combination of methods for the analysis of time-resolved photoelectron spectra based on power and time corrections as well as self-referencing of a strong photoelectron line. Based on sulfur 2p photoelectron spectra of 2-thiouracil taken at the SASE FEL FLASH2, we show that it is possible to correct for some of the photon energy drift and jitter even when reliable shot-to-shot photon energy data is not available. The quality of pump-probe difference spectra improves as random jumps in energy between delay points reduce significantly. The data analysis allows to identify coherent oscillations of 1 eV shift on the mean photoelectron line of 4 eV width with an error of less than 0.1 eV.}, language = {en} } @article{AndersSaitHorsley2022, author = {Anders, Janet and Sait, Connor R. J. and Horsley, Simon A. R.}, title = {Quantum Brownian motion for magnets}, series = {New journal of physics : the open-access journal for physics}, volume = {24}, journal = {New journal of physics : the open-access journal for physics}, number = {3}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1367-2630}, doi = {10.1088/1367-2630/ac4ef2}, pages = {21}, year = {2022}, abstract = {Spin precession in magnetic materials is commonly modelled with the classical phenomenological Landau-Lifshitz-Gilbert (LLG) equation. Based on a quantized three-dimensional spin + environment Hamiltonian, we here derive a spin operator equation of motion that describes precession and includes a general form of damping that consistently accounts for memory, coloured noise and quantum statistics. The LLG equation is recovered as its classical, Ohmic approximation. We further introduce resonant Lorentzian system-reservoir couplings that allow a systematic comparison of dynamics between Ohmic and non-Ohmic regimes. Finally, we simulate the full non-Markovian dynamics of a spin in the semi-classical limit. At low temperatures, our numerical results demonstrate a characteristic reduction and flattening of the steady state spin alignment with an external field, caused by the quantum statistics of the environment. The results provide a powerful framework to explore general three-dimensional dissipation in quantum thermodynamics.}, language = {en} } @phdthesis{Ilin2022, author = {Ilin, Ekaterina}, title = {High lights: stellar flares as probes of magnetism in stars and star-planet systems}, doi = {10.25932/publishup-56356}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-563565}, school = {Universit{\"a}t Potsdam}, pages = {x, 168}, year = {2022}, abstract = {Flares are magnetically driven explosions that occur in the atmospheres of all main sequence stars that possess an outer convection zone. Flaring activity is rooted in the magnetic dynamo that operates deep in the stellar interior, propagates through all layers of the atmosphere from the corona to the photosphere, and emits electromagnetic radiation from radio bands to X-ray. Eventually, this radiation, and associated eruptions of energetic particles, are ejected out into interplanetary space, where they impact planetary atmospheres, and dominate the space weather environments of young star-planet systems. Thanks to the Kepler and the Transit Exoplanet Survey Satellite (TESS) missions, flare observations have become accessible for millions of stars and star-planet systems. The goal of this thesis is to use these flares as multifaceted messengers to understand stellar magnetism across the main sequence, investigate planetary habitability, and explore how close-in planets can affect the host star. Using space based observations obtained by the Kepler/K2 mission, I found that flaring activity declines with stellar age, but this decline crucially depends on stellar mass and rotation. I calibrated the age of the stars in my sample using their membership in open clusters from zero age main sequence to solar age. This allowed me to reveal the rapid transition from an active, saturated flaring state to a more quiescent, inactive flaring behavior in early M dwarfs at about 600-800 Myr. This result is an important observational constraint on stellar activity evolution that I was able to de-bias using open clusters as an activity-independent age indicator. The TESS mission quickly superseded Kepler and K2 as the main source of flares in low mass M dwarfs. Using TESS 2-minute cadence light curves, I developed a new technique for flare localization and discovered, against the commonly held belief, that flares do not occur uniformly across their stellar surface: In fast rotating fully convective stars, giant flares are preferably located at high latitudes. This bears implications for both our understanding of magnetic field emergence in these stars, and the impact on the exoplanet atmospheres: A planet that orbits in the equatorial plane of its host may be spared from the destructive effects of these poleward emitting flares. AU Mic is an early M dwarf, and the most actively flaring planet host detected to date. Its innermost companion, AU Mic b is one of the most promising targets for a first observation of flaring star-planet interactions. In these interactions, the planet influences the star, as opposed to space weather, where the planet is always on the receiving side. The effect reflects the properties of the magnetosphere shared by planet and star, as well as the so far inaccessible magnetic properties of planets. In the about 50 days of TESS monitoring data of AU Mic, I searched for statistically robust signs of flaring interactions with AU Mic b as flares that occur in surplus of the star's intrinsic activity. I found the strongest yet still marginal signal in recurring excess flaring in phase with the orbital period of AU Mic b. If it reflects true signal, I estimate that extending the observing time by a factor of 2-3 will yield a statistically significant detection. Well within the reach of future TESS observations, this additional data may bring us closer to robustly detecting this effect than we have ever been. This thesis demonstrates the immense scientific value of space based, long baseline flare monitoring, and the versatility of flares as a carrier of information about the magnetism of star-planet systems. Many discoveries still lay in wait in the vast archives that Kepler and TESS have produced over the years. Flares are intense spotlights into the magnetic structures in star-planet systems that are otherwise far below our resolution limits. The ongoing TESS mission, and soon PLATO, will further open the door to in-depth understanding of small and dynamic scale magnetic fields on low mass stars, and the space weather environment they effect.}, language = {en} } @phdthesis{Mayer2022, author = {Mayer, Dennis}, title = {Time-resolved x-ray spectroscopy of 2-thiouracil}, doi = {10.25932/publishup-57163}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-571636}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 169}, year = {2022}, abstract = {In this thesis, I present my contributions to the field of ultrafast molecular spectroscopy. Using the molecule 2-thiouracil as an example, I use ultrashort x-ray pulses from free- electron lasers to study the relaxation dynamics of gas-phase molecular samples. Taking advantage of the x-ray typical element- and site-selectivity, I investigate the charge flow and geometrical changes in the excited states of 2-thiouracil. In order to understand the photoinduced dynamics of molecules, knowledge about the ground-state structure and the relaxation after photoexcitation is crucial. Therefore, a part of this thesis covers the electronic ground-state spectroscopy of mainly 2-thiouracil to provide the basis for the time-resolved experiments. Many of the previously published studies that focused on the gas-phase time-resolved dynamics of thionated uracils after UV excitation relied on information from solution phase spectroscopy to determine the excitation energies. This is not an optimal strategy as solvents alter the absorption spec- trum and, hence, there is no guarantee that liquid-phase spectra resemble the gas-phase spectra. Therefore, I measured the UV-absorption spectra of all three thionated uracils to provide a gas-phase reference and, in combination with calculations, we determined the excited states involved in the transitions. In contrast to the UV absorption, the literature on the x-ray spectroscopy of thionated uracil is sparse. Thus, we measured static photoelectron, Auger-Meitner and x-ray absorption spectra on the sulfur L edge before or parallel to the time-resolved experiments we performed at FLASH (DESY, Hamburg). In addition, (so far unpublished) measurements were performed at the synchrotron SOLEIL (France) which have been included in this thesis and show the spin-orbit splitting of the S 2p photoline and its satellite which was not observed at the free-electron laser. The relaxation of 2-thiouracil has been studied extensively in recent years with ultrafast visible and ultraviolet methods showing the ultrafast nature of the molecular process after photoexcitation. Ultrafast spectroscopy probing the core-level electrons provides a complementary approach to common optical ultrafast techniques. The method inherits its local sensitivity from the strongly localised core electrons. The core energies and core-valence transitions are strongly affected by local valence charge and geometry changes, and past studies have utilised this sensitivity to investigate the molecular process reflected by the ultrafast dynamics. We have built an apparatus that provides the requirements to perform time-resolved x-ray spectroscopy on molecules in the gas phase. With the apparatus, we performed UV-pump x-ray-probe electron spectroscopy on the S 2p edge of 2-thiouracil using the free-electron laser FLASH2. While the UV triggers the relaxation dynamics, the x-ray probes the single sulfur atom inside the molecule. I implemented photoline self-referencing for the photoelectron spectral analysis. This minimises the spectral jitter of the FEL, which is due to the underlying self-amplified spontaneous emission (SASE) process. With this approach, we were not only able to study dynamical changes in the binding energy of the electrons but also to detect an oscillatory behaviour in the shift of the observed photoline, which we associate with non-adiabatic dynamics involving several electronic states. Moreover, we were able to link the UV-induced shift in binding energy to the local charge flow at the sulfur which is directly connected to the electronic state. Furthermore, the analysis of the Auger-Meitner electrons shows that energy shifts observed at early stages of the photoinduced relaxation are related to the geometry change in the molecule. More specifically, the observed increase in kinetic energy of the Auger-Meitner electrons correlates with a previously predicted C=S bond stretch.}, language = {en} } @article{SecklerMetzler2022, author = {Seckler, Henrik and Metzler, Ralf}, title = {Bayesian deep learning for error estimation in the analysis of anomalous diffusion}, series = {Nature Communications}, volume = {13}, journal = {Nature Communications}, number = {1}, publisher = {Nature portfolio}, address = {Berlin}, issn = {2041-1723}, doi = {10.1038/s41467-022-34305-6}, pages = {13}, year = {2022}, abstract = {Modern single-particle-tracking techniques produce extensive time-series of diffusive motion in a wide variety of systems, from single-molecule motion in living-cells to movement ecology. The quest is to decipher the physical mechanisms encoded in the data and thus to better understand the probed systems. We here augment recently proposed machine-learning techniques for decoding anomalous-diffusion data to include an uncertainty estimate in addition to the predicted output. To avoid the Black-Box-Problem a Bayesian-Deep-Learning technique named Stochastic-Weight-Averaging-Gaussian is used to train models for both the classification of the diffusion model and the regression of the anomalous diffusion exponent of single-particle-trajectories. Evaluating their performance, we find that these models can achieve a well-calibrated error estimate while maintaining high prediction accuracies. In the analysis of the output uncertainty predictions we relate these to properties of the underlying diffusion models, thus providing insights into the learning process of the machine and the relevance of the output.
Diffusive motions in complex environments such as living biological cells or soft matter systems can be analyzed with single-particle-tracking approaches, where accuracy of output may vary. The authors involve a machine-learning technique for decoding anomalous-diffusion data and provide an uncertainty estimate together with predicted output.}, language = {en} } @phdthesis{Vu2022, author = {Vu, Nils Leif}, title = {A task-based parallel elliptic solver for numerical relativity with discontinuous Galerkin methods}, doi = {10.25932/publishup-56226}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-562265}, school = {Universit{\"a}t Potsdam}, pages = {172}, year = {2022}, abstract = {Elliptic partial differential equations are ubiquitous in physics. In numerical relativity---the study of computational solutions to the Einstein field equations of general relativity---elliptic equations govern the initial data that seed every simulation of merging black holes and neutron stars. In the quest to produce detailed numerical simulations of these most cataclysmic astrophysical events in our Universe, numerical relativists resort to the vast computing power offered by current and future supercomputers. To leverage these computational resources, numerical codes for the time evolution of general-relativistic initial value problems are being developed with a renewed focus on parallelization and computational efficiency. Their capability to solve elliptic problems for accurate initial data must keep pace with the increasing detail of the simulations, but elliptic problems are traditionally hard to parallelize effectively. In this thesis, I develop new numerical methods to solve elliptic partial differential equations on computing clusters, with a focus on initial data for orbiting black holes and neutron stars. I develop a discontinuous Galerkin scheme for a wide range of elliptic equations, and a stack of task-based parallel algorithms for their iterative solution. The resulting multigrid-Schwarz preconditioned Newton-Krylov elliptic solver proves capable of parallelizing over 200 million degrees of freedom to at least a few thousand cores, and already solves initial data for a black hole binary about ten times faster than the numerical relativity code SpEC. I also demonstrate the applicability of the new elliptic solver across physical disciplines, simulating the thermal noise in thin mirror coatings of interferometric gravitational-wave detectors to unprecedented accuracy. The elliptic solver is implemented in the new open-source SpECTRE numerical relativity code, and set up to support simulations of astrophysical scenarios for the emerging era of gravitational-wave and multimessenger astronomy.}, language = {en} } @article{Regenstein2022, author = {Regenstein, Wolfgang}, title = {Statistische Beschreibung des Resonanzenergietransfers in L{\"o}sungen}, doi = {10.25932/publishup-56500}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-565009}, pages = {23}, year = {2022}, abstract = {In resonance energy transfer, photons are transferred from an excited donor to an acceptor over an interaction distance. According to F{\"o}rster's quantum mechanical theory, this distance can be calculated using the overlap integral of the fluorescence spectrum of the donor and the absorption spectrum of the acceptor. Another possibility of determination is obtained with the help of statistical models, which are compiled in an overview. The distance can be determined by evaluating the extinction curve. In this work, a further statistical variant of the determination of the interaction radius is added and demonstrated in detail using an example.}, language = {de} } @phdthesis{Thomas2022, author = {Thomas, Timon}, title = {Cosmic-ray hydrodynamics: theory, numerics, applications}, doi = {10.25932/publishup-56384}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-563843}, school = {Universit{\"a}t Potsdam}, pages = {334}, year = {2022}, abstract = {Cosmic rays (CRs) are a ubiquitous and an important component of astrophysical environments such as the interstellar medium (ISM) and intracluster medium (ICM). Their plasma physical interactions with electromagnetic fields strongly influence their transport properties. Effective models which incorporate the microphysics of CR transport are needed to study the effects of CRs on their surrounding macrophysical media. Developing such models is challenging because of the conceptional, length-scale, and time-scale separation between the microscales of plasma physics and the macroscales of the environment. Hydrodynamical theories of CR transport achieve this by capturing the evolution of CR population in terms of statistical moments. In the well-established one-moment hydrodynamical model for CR transport, the dynamics of the entire CR population are described by a single statistical quantity such as the commonly used CR energy density. In this work, I develop a new hydrodynamical two-moment theory for CR transport that expands the well-established hydrodynamical model by including the CR energy flux as a second independent hydrodynamical quantity. I detail how this model accounts for the interaction between CRs and gyroresonant Alfv{\´e}n waves. The small-scale magnetic fields associated with these Alfv{\´e}n waves scatter CRs which fundamentally alters CR transport along large-scale magnetic field lines. This leads to the effects of CR streaming and diffusion which are both captured within the presented hydrodynamical theory. I use an Eddington-like approximation to close the hydrodynamical equations and investigate the accuracy of this closure-relation by comparing it to high-order approximations of CR transport. In addition, I develop a finite-volume scheme for the new hydrodynamical model and adapt it to the moving-mesh code Arepo. This scheme is applied using a simulation of a CR-driven galactic wind. I investigate how CRs launch the wind and perform a statistical analysis of CR transport properties inside the simulated circumgalactic medium (CGM). I show that the new hydrodynamical model can be used to explain the morphological appearance of a particular type of radio filamentary structures found inside the central molecular zone (CMZ). I argue that these harp-like features are synchrotron-radiating CRs which are injected into braided magnetic field lines by a point-like source such as a stellar wind of a massive star or a pulsar. Lastly, I present the finite-volume code Blinc that uses adaptive mesh refinement (AMR) techniques to perform simulations of radiation and magnetohydrodynamics (MHD). The mesh of Blinc is block-structured and represented in computer memory using a graph-based approach. I describe the implementation of the mesh graph and how a diffusion process is employed to achieve load balancing in parallel computing environments. Various test problems are used to verify the accuracy and robustness of the employed numerical algorithms.}, language = {en} } @misc{XuZhouMetzleretal.2022, author = {Xu, Pengbo and Zhou, Tian and Metzler, Ralf and Deng, Weihua}, title = {Stochastic harmonic trapping of a L{\´e}vy walk: transport and first-passage dynamics under soft resetting strategies}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1866-8372}, doi = {10.25932/publishup-56040}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560402}, pages = {1 -- 28}, year = {2022}, abstract = {We introduce and study a L{\´e}vy walk (LW) model of particle spreading with a finite propagation speed combined with soft resets, stochastically occurring periods in which an harmonic external potential is switched on and forces the particle towards a specific position. Soft resets avoid instantaneous relocation of particles that in certain physical settings may be considered unphysical. Moreover, soft resets do not have a specific resetting point but lead the particle towards a resetting point by a restoring Hookean force. Depending on the exact choice for the LW waiting time density and the probability density of the periods when the harmonic potential is switched on, we demonstrate a rich emerging response behaviour including ballistic motion and superdiffusion. When the confinement periods of the soft-reset events are dominant, we observe a particle localisation with an associated non-equilibrium steady state. In this case the stationary particle probability density function turns out to acquire multimodal states. Our derivations are based on Markov chain ideas and LWs with multiple internal states, an approach that may be useful and flexible for the investigation of other generalised random walks with soft and hard resets. The spreading efficiency of soft-rest LWs is characterised by the first-passage time statistic.}, language = {en} } @misc{TeichmannLewandowskiAlemani2022, author = {Teichmann, Erik and Lewandowski, Heather J. and Alemani, Micol}, title = {Investigating students' views of experimental physics in German laboratory classes}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1866-8372}, doi = {10.25932/publishup-56042}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560429}, pages = {010135-1 -- 010135-17}, year = {2022}, abstract = {There is a large variety of goals instructors have for laboratory courses, with different courses focusing on different subsets of goals. An often implicit, but crucial, goal is to develop students' attitudes, views, and expectations about experimental physics to align with practicing experimental physicists. The assessment of laboratory courses upon this one dimension of learning has been intensively studied in U.S. institutions using the Colorado Learning Attitudes about Science Survey for Experimental Physics (E-CLASS). However, there is no such an instrument available to use in Germany, and the influence of laboratory courses on students views about the nature of experimental physics is still unexplored at German-speaking institutions. Motivated by the lack of an assessment tool to investigate this goal in laboratory courses at German-speaking institutions, we present a translated version of the E-CLASS adapted to the context at German-speaking institutions. We call the German version of the E-CLASS, the GE-CLASS. We describe the translation process and the creation of an automated web-based system for instructors to assess their laboratory courses. We also present first results using GE-CLASS obtained at the University of Potsdam. A first comparison between E-CLASS and GE-CLASS results shows clear differences between University of Potsdam and U.S. students' views and beliefs about experimental physics.}, language = {en} } @phdthesis{Schemenz2022, author = {Schemenz, Victoria}, title = {Correlations between osteocyte lacuno-canalicular network and material characteristics in bone adaptation and regeneration}, doi = {10.25932/publishup-55959}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-559593}, school = {Universit{\"a}t Potsdam}, pages = {3, xii, 146}, year = {2022}, abstract = {The complex hierarchical structure of bone undergoes a lifelong remodeling process, where it adapts to mechanical needs. Hereby, bone resorption by osteoclasts and bone formation by osteoblasts have to be balanced to sustain a healthy and stable organ. Osteocytes orchestrate this interplay by sensing mechanical strains and translating them into biochemical signals. The osteocytes are located in lacunae and are connected to one another and other bone cells via cell processes through small channels, the canaliculi. Lacunae and canaliculi form a network (LCN) of extracellular spaces that is able to transport ions and enables cell-to-cell communication. Osteocytes might also contribute to mineral homeostasis by direct interactions with the surrounding matrix. If the LCN is acting as a transport system, this should be reflected in the mineralization pattern. The central hypothesis of this thesis is that osteocytes are actively changing their material environment. Characterization methods of material science are used to achieve the aim of detecting traces of this interaction between osteocytes and the extracellular matrix. First, healthy murine bones were characterized. The properties analyzed were then compared with three murine model systems: 1) a loading model, where a bone of the mouse was loaded during its life time; 2) a healing model, where a bone of the mouse was cut to induce a healing response; and 3) a disease model, where the Fbn1 gene is dysfunctional causing defects in the formation of the extracellular tissue. The measurement strategy included routines that make it possible to analyze the organization of the LCN and the material components (i.e., the organic collagen matrix and the mineral particles) in the same bone volumes and compare the spatial distribution of different data sets. The three-dimensional network architecture of the LCN is visualized by confocal laser scanning microscopy (CLSM) after rhodamine staining and is then subsequently quantified. The calcium content is determined via quantitative backscattered electron imaging (qBEI), while small- and wide-angle X-ray scattering (SAXS and WAXS) are employed to determine the thickness and length of local mineral particles. First, tibiae cortices of healthy mice were characterized to investigate how changes in LCN architecture can be attributed to interactions of osteocytes with the surrounding bone matrix. The tibial mid-shaft cross-sections showed two main regions, consisting of a band with unordered LCN surrounded by a region with ordered LCN. The unordered region is a remnant of early bone formation and exhibited short and thin mineral particles. The surrounding, more aligned bone showed ordered and dense LCN as well as thicker and longer mineral particles. The calcium content was unchanged between the two regions. In the mouse loading model, the left tibia underwent two weeks of mechanical stimulation, which results in increased bone formation and decreased resorption in skeletally mature mice. Here the specific research question addressed was how do bone material characteristics change at (re)modeling sites? The new bone formed in response to mechanical stimulation showed similar properties in terms of the mineral particles, like the ordered calcium region but lower calcium content compared to the right, non-loaded control bone of the same mice. There was a clear, recognizable border between mature and newly formed bone. Nevertheless, some canaliculi went through this border connecting the LCN of mature and newly formed bone. Additionally, the question should be answered whether the LCN topology and the bone matrix material properties adapt to loading. Although, mechanically stimulated bones did not show differences in calcium content compared to controls, different correlations were found between the local LCN density and the local Ca content depending on whether the bone was loaded or not. These results suggest that the LCN may serve as a mineral reservoir. For the healing model, the femurs of mice underwent an osteotomy, stabilized with an external fixator and were allowed to heal for 21 days. Thus, the spatial variations in the LCN topology with mineral properties within different tissue types and their interfaces, namely calcified cartilage, bony callus and cortex, could be simultaneously visualized and compared in this model. All tissue types showed structural differences across multiple length scales. Calcium content increased and became more homogeneous from calcified cartilage to bony callus to lamellar cortical bone. The degree of LCN organization increased as well, while the lacunae became smaller, as did the lacunar density between these different tissue types that make up the callus. In the calcified cartilage, the mineral particles were short and thin. The newly formed callus exhibited thicker mineral particles, which still had a low degree of orientation. While most of the callus had a woven-like structure, it also served as a scaffold for more lamellar tissue at the edges. The lamelar bone callus showed thinner mineral particles, but a higher degree of alignment in both, mineral particles and the LCN. The cortex showed the highest values for mineral length, thickness and degree of orientation. At the same time, the lacunae number density was 34\% lower and the lacunar volume 40\% smaller compared to bony callus. The transition zone between cortical and callus regions showed a continuous convergence of bone mineral properties and lacunae shape. Although only a few canaliculi connected callus and the cortical region, this indicates that communication between osteocytes of both tissues should be possible. The presented correlations between LCN architecture and mineral properties across tissue types may suggest that osteocytes have an active role in mineralization processes of healing. A mouse model for the disease marfan syndrome, which includes a genetic defect in the fibrillin-1 gene, was investigated. In humans, Marfan syndrome is characterized by a range of clinical symptoms such as long bone overgrowth, loose joints, reduced bone mineral density, compromised bone microarchitecture, and increased fracture rates. Thus, fibrillin-1 seems to play a role in the skeletal homeostasis. Therefore, the present work studied how marfan syndrome alters LCN architecture and the surrounding bone matrix. The mice with marfan syndrome showed longer tibiae than their healthy littermates from an age of seven weeks onwards. In contrast, the cortical development appeared retarded, which was observed across all measured characteristics, i. e. lower endocortical bone formation, looser and less organized lacuno-canalicular network, less collagen orientation, thinner and shorter mineral particles. In each of the three model systems, this study found that changes in the LCN architecture spatially correlated with bone matrix material parameters. While not knowing the exact mechanism, these results provide indications that osteocytes can actively manipulate a mineral reservoir located around the canaliculi to make a quickly accessible contribution to mineral homeostasis. However, this interaction is most likely not one-sided, but could be understood as an interplay between osteocytes and extra-cellular matrix, since the bone matrix contains biochemical signaling molecules (e.g. non-collagenous proteins) that can change osteocyte behavior. Bone (re)modeling can therefore not only be understood as a method for removing defects or adapting to external mechanical stimuli, but also for increasing the efficiency of possible osteocyte-mineral interactions during bone homeostasis. With these findings, it seems reasonable to consider osteocytes as a target for drug development related to bone diseases that cause changes in bone composition and mechanical properties. It will most likely require the combined effort of materials scientists, cell biologists, and molecular biologists to gain a deeper understanding of how bone cells respond to their material environment.}, language = {en} } @phdthesis{Nayak2022, author = {Nayak, Abani Shankar}, title = {Design, Characterization and On-sky Testing of an Integrated Optics Device for Stellar Interferometry: from Pupil Remappers to Discrete Beam Combiner}, doi = {10.25932/publishup-55874}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-558743}, school = {Universit{\"a}t Potsdam}, pages = {xl, 175}, year = {2022}, abstract = {Stellar interferometry is the only method in observational astronomy for obtaining the highest resolution images of astronomical targets. This method is based on combining light from two or more separate telescopes to obtain the complex visibility that contains information about the brightness distribution of an astronomical source. The applications of stellar interferometry have made significant contributions in the exciting research areas of astronomy and astrophysics, including the precise measurement of stellar diameters, imaging of stellar surfaces, observations of circumstellar disks around young stellar objects, predictions of Einstein's General relativity at the galactic center, and the direct search for exoplanets to name a few. One important related technique is aperture masking interferometry, pioneered in the 1960s, which uses a mask with holes at the re-imaged pupil of the telescope, where the light from the holes is combined using the principle of stellar interferometry. While this can increase the resolution, it comes with a disadvantage. Due to the finite size of the holes, the majority of the starlight (typically > 80 \%) is lost at the mask, thus limiting the signal-to-noise ratio (SNR) of the output images. This restriction of aperture masking only to the bright targets can be avoided using pupil remapping interferometry - a technique combining aperture masking interferometry and advances in photonic technologies using single-mode fibers. Due to the inherent spatial filtering properties, the single-mode fibers can be placed at the focal plane of the re-imaged pupil, allowing the utilization of the whole pupil of the telescope to produce a high-dynamic range along with high-resolution images. Thus, pupil remapping interferometry is one of the most promising application areas in the emerging field of astrophotonics. At the heart of an interferometric facility, a beam combiner exists whose primary function is to combine light to obtain high-contrast fringes. A beam combiner can be as simple as a beam splitter or an anamorphic lens to combine light from 2 apertures (or telescopes) or as complex as a cascade of beam splitters and lenses to combine light for > 2 apertures. However, with the field of astrophotonics, interferometric facilities across the globe are increasingly employing some form of photonics technologies by using single-mode fibers or integrated optics (IO) chips as an efficient way to combine light from several apertures. The state-of-the-art instrument - GRAVITY at the very large telescope interferometer (VLTI) facility uses an IO-based beam combiner device reaching visibilities accuracy of better than < 0.25 \%, which is roughly 50× as precise as a few decades back. Therefore, in the context of IO-based components for applications in stellar interferometry, this Thesis describes the work towards the development of a 3-dimensional (3-D) IO device - a monolithic astrophotonics component containing both the pupil remappers and a discrete beam combiner (DBC). In this work, the pupil remappers are 3-D single-mode waveguides in a glass substrate collecting light from the re-imaged pupil of the telescope and feeding the light to a DBC, where the combination takes place. The DBC is a lattice of 3-D single-mode waveguides, which interact through evanescent coupling. By observing the output power of single-mode waveguides of the DBC, the visibilities are retrieved by using a calibrated transfer matrix ({U}) of the device. The feasibility of the DBC in retrieving the visibilities theoretically and experimentally had already been studied in the literature but was only limited to laboratory tests with monochromatic light sources. Thus, a part of this work extends these studies by investigating the response of a 4-input DBC to a broad-band light source. Hence, the objectives of this Thesis are the following: 1) Design an IO device for broad-band light operation such that accurate and precise visibilities could be retrieved experimentally at astronomical H-band (1.5-1.65 μm), and 2) Validation of the DBC as a possible beam combination scheme for future interferometric facilities through on-sky testing at the William Herschel Telescope (WHT). This work consisted of designing three different 3-D IO devices. One of the popular methods for fabricating 3-D photonic components in a glass substrate is ultra-fast laser inscription (ULI). Thus, manufacturing of the designed devices was outsourced to Politecnico di Milano as part of an iterative fabrication process using their state-of-the-art ULI facility. The devices were then characterized using a 2-beam Michelson interferometric setup obtaining both the monochromatic and polychromatic visibilities. The retrieved visibilities for all devices were in good agreement as predicted by the simulation results of a DBC, which confirms both the repeatability of the ULI process and the stability of the Michelson setup, thus fulfilling the first objective. The best-performing device was then selected for the pupil-remapping of the WHT using a different optical setup consisting of a deformable mirror and a microlens array. The device successfully collected stellar photons from Vega and Altair. The visibilities were retrieved using a previously calibrated {U} but showed significant deviations from the expected results. Based on the analysis of comparable simulations, it was found that such deviations were primarily caused by the limited SNR of the stellar observations, thus constituting a first step towards the fulfillment of the second objective.}, language = {en} } @misc{SarabadaniMetzlerAlaNissila2022, author = {Sarabadani, Jalal and Metzler, Ralf and Ala-Nissila, Tapio}, title = {Driven polymer translocation into a channel: Isoflux tension propagation theory and Langevin dynamics simulations}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1292}, issn = {1866-8372}, doi = {10.25932/publishup-57438}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-574387}, pages = {033003-1 -- 033003-14}, year = {2022}, abstract = {Isoflux tension propagation (IFTP) theory and Langevin dynamics (LD) simulations are employed to study the dynamics of channel-driven polymer translocation in which a polymer translocates into a narrow channel and the monomers in the channel experience a driving force fc. In the high driving force limit, regardless of the channel width, IFTP theory predicts τ ∝ f βc for the translocation time, where β = -1 is the force scaling exponent. Moreover, LD data show that for a very narrow channel fitting only a single file of monomers, the entropic force due to the subchain inside the channel does not play a significant role in the translocation dynamics and the force exponent β = -1 regardless of the force magnitude. As the channel width increases the number of possible spatial configurations of the subchain inside the channel becomes significant and the resulting entropic force causes the force exponent to drop below unity.}, language = {en} } @misc{SmirnovBolotovBolotovetal.2022, author = {Smirnov, Lev A. and Bolotov, Maxim and Bolotov, Dmitri and Osipov, Grigory V. and Pikovsky, Arkady}, title = {Finite-density-induced motility and turbulence of chimera solitons}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1291}, issn = {1866-8372}, doi = {10.25932/publishup-57428}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-574281}, pages = {15}, year = {2022}, abstract = {We consider a one-dimensional oscillatory medium with a coupling through a diffusive linear field. In the limit of fast diffusion this setup reduces to the classical Kuramoto-Battogtokh model. We demonstrate that for a finite diffusion stable chimera solitons, namely localized synchronous domain in an infinite asynchronous environment, are possible. The solitons are stable also for finite density of oscillators, but in this case they sway with a nearly constant speed. This finite-density-induced motility disappears in the continuum limit, as the velocity of the solitons is inverse proportional to the density. A long-wave instability of the homogeneous asynchronous state causes soliton turbulence, which appears as a sequence of soliton mergings and creations. As the instability of the asynchronous state becomes stronger, this turbulence develops into a spatio-temporal intermittency.}, language = {en} } @misc{VilkAghionAvgaretal.2022, author = {Vilk, Ohad and Aghion, Erez and Avgar, Tal and Beta, Carsten and Nagel, Oliver and Sabri, Adal and Sarfati, Raphael and Schwartz, Daniel K. and Weiß, Matthias and Krapf, Diego and Nathan, Ran and Metzler, Ralf and Assaf, Michael}, title = {Unravelling the origins of anomalous diffusion}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1303}, issn = {1866-8372}, doi = {10.25932/publishup-57764}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-577643}, pages = {16}, year = {2022}, abstract = {Anomalous diffusion or, more generally, anomalous transport, with nonlinear dependence of the mean-squared displacement on the measurement time, is ubiquitous in nature. It has been observed in processes ranging from microscopic movement of molecules to macroscopic, large-scale paths of migrating birds. Using data from multiple empirical systems, spanning 12 orders of magnitude in length and 8 orders of magnitude in time, we employ a method to detect the individual underlying origins of anomalous diffusion and transport in the data. This method decomposes anomalous transport into three primary effects: long-range correlations ("Joseph effect"), fat-tailed probability density of increments ("Noah effect"), and nonstationarity ("Moses effect"). We show that such a decomposition of real-life data allows us to infer nontrivial behavioral predictions and to resolve open questions in the fields of single-particle tracking in living cells and movement ecology.}, language = {en} } @article{MauRosenblum2022, author = {Mau, Erik Thomas Klaus and Rosenblum, Michael}, title = {Optimizing charge-balanced pulse stimulation for desynchronization}, series = {Chaos : an interdisciplinary journal of nonlinear science}, volume = {32}, journal = {Chaos : an interdisciplinary journal of nonlinear science}, number = {1}, publisher = {AIP}, address = {Melville}, issn = {1054-1500}, doi = {10.1063/5.0070036}, pages = {15}, year = {2022}, abstract = {Collective synchronization in a large population of self-sustained units appears both in natural and engineered systems. Sometimes this effect is in demand, while in some cases, it is undesirable, which calls for control techniques. In this paper, we focus on pulsatile control, with the goal to either increase or decrease the level of synchrony. We quantify this level by the entropy of the phase distribution. Motivated by possible applications in neuroscience, we consider pulses of a realistic shape. Exploiting the noisy Kuramoto-Winfree model, we search for the optimal pulse profile and the optimal stimulation phase. For this purpose, we derive an expression for the change of the phase distribution entropy due to the stimulus. We relate this change to the properties of individual units characterized by generally different natural frequencies and phase response curves and the population's state. We verify the general result by analyzing a two-frequency population model and demonstrating a good agreement of the theory and numerical simulations.}, language = {en} } @article{MorenoGrossmannBetaetal.2022, author = {Moreno, Eduardo and Großmann, Robert and Beta, Carsten and Alonso, Sergio}, title = {From single to collective motion of social amoebae}, series = {Frontiers in physics}, volume = {9}, journal = {Frontiers in physics}, publisher = {Frontiers Media}, address = {Lausanne}, issn = {2296-424X}, doi = {10.3389/fphy.2021.750187}, pages = {17}, year = {2022}, abstract = {The coupling of the internal mechanisms of cell polarization to cell shape deformations and subsequent cell crawling poses many interdisciplinary scientific challenges. Several mathematical approaches have been proposed to model the coupling of both processes, where one of the most successful methods relies on a phase field that encodes the morphology of the cell, together with the integration of partial differential equations that account for the polarization mechanism inside the cell domain as defined by the phase field. This approach has been previously employed to model the motion of single cells of the social amoeba Dictyostelium discoideum, a widely used model organism to study actin-driven motility and chemotaxis of eukaryotic cells. Besides single cell motility, Dictyostelium discoideum is also well-known for its collective behavior. Here, we extend the previously introduced model for single cell motility to describe the collective motion of large populations of interacting amoebae by including repulsive interactions between the cells. We performed numerical simulations of this model, first characterizing the motion of single cells in terms of their polarity and velocity vectors. We then systematically studied the collisions between two cells that provided the basic interaction scenarios also observed in larger ensembles of interacting amoebae. Finally, the relevance of the cell density was analyzed, revealing a systematic decrease of the motility with density, associated with the formation of transient cell clusters that emerge in this system even though our model does not include any attractive interactions between cells. This model is a prototypical active matter system for the investigation of the emergent collective dynamics of deformable, self-driven cells with a highly complex, nonlinear coupling of cell shape deformations, self-propulsion and repulsive cell-cell interactions. Understanding these self-organization processes of cells like their autonomous aggregation is of high relevance as collective amoeboid motility is part of wound healing, embryonic morphogenesis or pathological processes like the spreading of metastatic cancer cells.}, language = {en} } @phdthesis{Buechner2022, author = {B{\"u}chner, Robby}, title = {Understanding local electronic structure variations in bio-inspired aromatic molecules}, doi = {10.25932/publishup-55319}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-553192}, school = {Universit{\"a}t Potsdam}, pages = {viii, 111}, year = {2022}, abstract = {In this thesis, the dependencies of charge localization and itinerance in two classes of aromatic molecules are accessed: pyridones and porphyrins. The focus lies on the effects of isomerism, complexation, solvation, and optical excitation, which are concomitant with different crucial biological applications of specific members of these groups of compounds. Several porphyrins play key roles in the metabolism of plants and animals. The nucleobases, which store the genetic information in the DNA and RNA are pyridone derivatives. Additionally, a number of vitamins are based on these two groups of substances. This thesis aims to answer the question of how the electronic structure of these classes of molecules is modified, enabling the versatile natural functionality. The resulting insights into the effect of constitutional and external factors are expected to facilitate the design of new processes for medicine, light-harvesting, catalysis, and environmental remediation. The common denominator of pyridones and porphyrins is their aromatic character. As aromaticity was an early-on topic in chemical physics, the overview of relevant theoretical models in this work also mirrors the development of this scientific field in the 20th century. The spectroscopic investigation of these compounds has long been centered on their global, optical transition between frontier orbitals. The utilization and advancement of X-ray spectroscopic methods characterizing the local electronic structure of molecular samples form the core of this thesis. The element selectivity of the near-edge X-ray absorption fine structure (NEXAFS) is employed to probe the unoccupied density of states at the nitrogen site, which is key for the chemical reactivity of pyridones and porphyrins. The results contribute to the growing database of NEXAFS features and their interpretation, e.g., by advancing the debate on the porphyrin N K-edge through systematic experimental and theoretical arguments. Further, a state-of-the-art laser pump - NEXAFS probe scheme is used to characterize the relaxation pathway of a photoexcited porphyrin on the atomic level. Resonant inelastic X-ray scattering (RIXS) provides complementary results by accessing the highest occupied valence levels including symmetry information. It is shown that RIXS is an effective experimental tool to gain detailed information on charge densities of individual species in tautomeric mixtures. Additionally, the hRIXS and METRIXS high-resolution RIXS spectrometers, which have been in part commissioned in the course of this thesis, will gain access to the ultra-fast and thermal chemistry of pyridones, porphyrins, and many other compounds. With respect to both classes of bio-inspired aromatic molecules, this thesis establishes that even though pyridones and porphyrins differ largely by their optical absorption bands and hydrogen bonding abilities, they all share a global stabilization of local constitutional changes and relevant external perturbation. It is because of this wide-ranging response that pyridones and porphyrins can be applied in a manifold of biological and technical processes.}, language = {en} } @article{KranjcHorvatWienerSchmelingetal.2022, author = {Kranjc Horvat, Anja and Wiener, Jeff and Schmeling, Sascha and Borowski, Andreas}, title = {Learning goals of professional development programs at science research institutions}, series = {Journal of science teacher education : the official journal of the Association for the Education of Teachers in Science}, volume = {33}, journal = {Journal of science teacher education : the official journal of the Association for the Education of Teachers in Science}, number = {1}, publisher = {Routledge, Taylor \& Francis Group}, address = {Abingdon}, issn = {1046-560X}, doi = {10.1080/1046560X.2021.1905330}, pages = {32 -- 54}, year = {2022}, abstract = {Effective professional development programs (PDPs) rely on well-defined goals. However, recent studies on PDPs have not explored the goals from a multi-stakeholder perspective. This study identifies the most important learning goals of PDPs at science research institutions as perceived by four groups of stakeholders, namely teachers, education researchers, government representatives, and research scientists. Altogether, over 100 stakeholders from 42 countries involved in PDPs at science research institutions in Europe and North America participated in a three-round Delphi study. In the first round, the stakeholders provided their opinions on what they thought the learning goals of PDPs should be through an open-ended questionnaire. In the second and third rounds, the stakeholders assessed the importance of the learning goals that emerged from the first round by rating and ranking them, respectively. The outcome of the study is a hierarchical list of the ten most important learning goals of PDPs at particle physics laboratories. The stakeholders identified enhancing teachers' knowledge of scientific concepts and models and enhancing their knowledge of the curricula as the most important learning goals. Furthermore, the results show strong agreement between all the stakeholder groups regarding the defined learning goals. Indeed, all groups ranked the learning goals by their perceived importance almost identically. These outcomes could help policymakers establish more specific policies for PDPs. Additionally, they provide PDP practitioners at science research institutions with a solid base for future research and planning endeavors.}, language = {en} } @article{LewensteinCirauquiAngelGarciaMarchetal.2022, author = {Lewenstein, Maciej and Cirauqui, David and Angel Garcia-March, Miguel and Corominas, Guillem Guigo and Grzybowski, Przemyslaw and Saavedra, Jose R. M. and Wilkens, Martin and Wehr, Jan}, title = {Haake-Lewenstein-Wilkens approach to spin-glasses revisited}, series = {Journal of physics : A, Mathematical and theoretical}, volume = {55}, journal = {Journal of physics : A, Mathematical and theoretical}, number = {45}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1751-8113}, doi = {10.1088/1751-8121/ac9d10}, pages = {20}, year = {2022}, abstract = {We revisit the Haake-Lewenstein-Wilkens approach to Edwards-Anderson (EA) model of Ising spin glass (SG) (Haake et al 1985 Phys. Rev. Lett. 55 2606). This approach consists in evaluation and analysis of the probability distribution of configurations of two replicas of the system, averaged over quenched disorder. This probability distribution generates squares of thermal copies of spin variables from the two copies of the systems, averaged over disorder, that is the terms that enter the standard definition of the original EA order parameter, qEA 0 0}, language = {en} } @article{Regenstein2022, author = {Regenstein, Wolfgang}, title = {Statistische Beschreibung des Resonanzenergietransfers in L{\"o}sungen}, edition = {2. Version}, doi = {10.25932/publishup-56597}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-565977}, pages = {23}, year = {2022}, abstract = {Beim Resonanzenergietransfer werden Fotonen von einem angeregten Donator {\"u}ber einen Wechselwirkungsabstand auf einen Akzeptor {\"u}bertragen. Nach der quantenmechanischen Theorie von F{\"O}RSTER kann dieser Abstand mit Hilfe des {\"U}berlappungsintegrals von Fluoreszenzspektrum des Donators und Absorp-tionsspektrum des Akzeptors berechnet werden. Eine andere M{\"o}glichkeit der Bestimmung erh{\"a}lt man mit Hilfe von statistischen Modellen, die in einem {\"U}berblick zusammengestellt sind. Dabei kann der Abstand durch Auswertung der L{\"o}schkurve bestimmt werden. In dieser Arbeit wird dazu eine weitere statistische Variante der Bestimmung des Wechselwirkungsradius hinzugef{\"u}gt und an einem Beispiel ausf{\"u}hrlich demonstriert.}, language = {de} } @article{KliemSeehafer2022, author = {Kliem, Bernhard and Seehafer, Norbert}, title = {Helicity shedding by flux rope ejection}, series = {Astronomy and astrophysics : an international weekly journal}, volume = {659}, journal = {Astronomy and astrophysics : an international weekly journal}, publisher = {EDP Sciences}, address = {Les Ulis}, issn = {0004-6361}, doi = {10.1051/0004-6361/202142422}, pages = {9}, year = {2022}, abstract = {We quantitatively address the conjecture that magnetic helicity must be shed from the Sun by eruptions launching coronal mass ejections in order to limit its accumulation in each hemisphere. By varying the ratio of guide and strapping field and the flux rope twist in a parametric simulation study of flux rope ejection from approximately marginally stable force-free equilibria, different ratios of self- and mutual helicity are set and the onset of the torus or helical kink instability is obtained. The helicity shed is found to vary over a broad range from a minor to a major part of the initial helicity, with self helicity being largely or completely shed and mutual helicity, which makes up the larger part of the initial helicity, being shed only partly. Torus-unstable configurations with subcritical twist and without a guide field shed up to about two-thirds of the initial helicity, while a highly twisted, kink-unstable configuration sheds only about one-quarter. The parametric study also yields stable force-free flux rope equilibria up to a total flux-normalized helicity of 0.25, with a ratio of self- to total helicity of 0.32 and a ratio of flux rope to external poloidal flux of 0.94. These results numerically demonstrate the conjecture of helicity shedding by coronal mass ejections and provide a first account of its parametric dependence. Both self- and mutual helicity are shed significantly; this reduces the total initial helicity by a fraction of ∼0.4--0.65 for typical source region parameters.}, language = {en} } @phdthesis{Laquai2022, author = {Laquai, Ren{\´e}}, title = {Extending synchrotron X-ray refraction techniques to the quantitative analysis of metallic materials}, doi = {10.25932/publishup-54183}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-541835}, school = {Universit{\"a}t Potsdam}, pages = {vii, 71, XIV}, year = {2022}, abstract = {In this work, two X-ray refraction based imaging methods, namely, synchrotron X-ray refraction radiography (SXRR) and synchrotron X-ray refraction computed tomography (SXRCT), are applied to analyze quantitatively cracks and porosity in metallic materials. SXRR and SXRCT make use of the refraction of X-rays at inner surfaces of the material, e.g., the surfaces of cracks and pores, for image contrast. Both methods are, therefore, sensitive to smaller defects than their absorption based counterparts X-ray radiography and computed tomography. They can detect defects of nanometric size. So far the methods have been applied to the analysis of ceramic materials and fiber reinforced plastics. The analysis of metallic materials requires higher photon energies to achieve sufficient X-ray transmission due to their higher density. This causes smaller refraction angles and, thus, lower image contrast because the refraction index depends on the photon energy. Here, for the first time, a conclusive study is presented exploring the possibility to apply SXRR and SXRCT to metallic materials. It is shown that both methods can be optimized to overcome the reduced contrast due to smaller refraction angles. Hence, the only remaining limitation is the achievable X-ray transmission which is common to all X-ray imaging methods. Further, a model for the quantitative analysis of the inner surfaces is presented and verified. For this purpose four case studies are conducted each posing a specific challenge to the imaging task. Case study A investigates cracks in a coupon taken from an aluminum weld seam. This case study primarily serves to verify the model for quantitative analysis and prove the sensitivity to sub-resolution features. In case study B, the damage evolution in an aluminum-based particle reinforced metal-matrix composite is analyzed. Here, the accuracy and repeatability of subsequent SXRR measurements is investigated showing that measurement errors of less than 3 \% can be achieved. Further, case study B marks the fist application of SXRR in combination with in-situ tensile loading. Case study C is out of the highly topical field of additive manufacturing. Here, porosity in additively manufactured Ti-Al6-V4 is analyzed with a special interest in the pore morphology. A classification scheme based on SXRR measurements is devised which allows to distinguish binding defects from keyhole pores even if the defects cannot be spatially resolved. In case study D, SXRCT is applied to the analysis of hydrogen assisted cracking in steel. Due to the high X-ray attenuation of steel a comparatively high photonenergy of 50 keV is required here. This causes increased noise and lower contrast in the data compared to the other case studies. However, despite the lower data quality a quantitative analysis of the occurance of cracks in dependence of hydrogen content and applied mechanical load is possible.}, language = {en} } @article{FischerAndersSaalfrank2022, author = {Fischer, Eric Wolfgang and Anders, Janet and Saalfrank, Peter}, title = {Cavity-altered thermal isomerization rates and dynamical resonant localization in vibro-polaritonic chemistry}, series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, volume = {156}, journal = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistr}, number = {15}, publisher = {American Institute of Physics}, address = {Melville, NY}, issn = {0021-9606}, doi = {10.1063/5.0076434}, pages = {16}, year = {2022}, abstract = {It has been experimentally demonstrated that reaction rates for molecules embedded in microfluidic optical cavities are altered when compared to rates observed under "ordinary" reaction conditions. However, precise mechanisms of how strong coupling of an optical cavity mode to molecular vibrations affects the reactivity and how resonance behavior emerges are still under dispute. In the present work, we approach these mechanistic issues from the perspective of a thermal model reaction, the inversion of ammonia along the umbrella mode, in the presence of a single-cavity mode of varying frequency and coupling strength. A topological analysis of the related cavity Born-Oppenheimer potential energy surface in combination with quantum mechanical and transition state theory rate calculations reveals two quantum effects, leading to decelerated reaction rates in qualitative agreement with experiments: the stiffening of quantized modes perpendicular to the reaction path at the transition state, which reduces the number of thermally accessible reaction channels, and the broadening of the barrier region, which attenuates tunneling. We find these two effects to be very robust in a fluctuating environment, causing statistical variations of potential parameters, such as the barrier height. Furthermore, by solving the time-dependent Schrodinger equation in the vibrational strong coupling regime, we identify a resonance behavior, in qualitative agreement with experimental and earlier theoretical work. The latter manifests as reduced reaction probability when the cavity frequency omega(c) is tuned resonant to a molecular reactant frequency. We find this effect to be based on the dynamical localization of the vibro-polaritonic wavepacket in the reactant well.}, language = {en} } @article{OsterFritschUlbrichtetal.2022, author = {Oster, Simon and Fritsch, Tobias and Ulbricht, Alexander and Mohr, Gunther and Bruno, Giovanni and Maierhofer, Christiane and Altenburg, Simon}, title = {On the registration of thermographic in situ monitoring data and computed tomography reference data in the scope of defect prediction in laser powder bed fusion}, series = {Metals : open access journal}, volume = {12}, journal = {Metals : open access journal}, number = {6}, publisher = {MDPI}, address = {Basel}, issn = {2075-4701}, doi = {10.3390/met12060947}, pages = {21}, year = {2022}, abstract = {The detection of internal irregularities is crucial for quality assessment in metal-based additive manufacturing (AM) technologies such as laser powder bed fusion (L-PBF). The utilization of in-process thermography as an in situ monitoring tool in combination with post-process X-ray micro computed tomography (XCT) as a reference technique has shown great potential for this aim. Due to the small irregularity dimensions, a precise registration of the datasets is necessary as a requirement for correlation. In this study, the registration of thermography and XCT reference datasets of a cylindric specimen containing keyhole pores is carried out for the development of a porosity prediction model. The considered datasets show variations in shape, data type and dimensionality, especially due to shrinkage and material elevation effects present in the manufactured part. Since the resulting deformations are challenging for registration, a novel preprocessing methodology is introduced that involves an adaptive volume adjustment algorithm which is based on the porosity distribution in the specimen. Thus, the implementation of a simple three-dimensional image-to-image registration is enabled. The results demonstrate the influence of the part deformation on the resulting porosity location and the importance of registration in terms of irregularity prediction.}, language = {en} } @article{MallonnPoppenhaegerGranzeretal.2022, author = {Mallonn, Matthias and Poppenh{\"a}ger, Katja and Granzer, Thomas and Weber, Michael and Strassmeier, Klaus G.}, title = {Detection capability of ground-based meter-sized telescopes for shallow exoplanet transits}, series = {Astronomy and astrophysics : an international weekly journal}, volume = {657}, journal = {Astronomy and astrophysics : an international weekly journal}, publisher = {EDP Sciences}, address = {Les Ulis}, issn = {0004-6361}, doi = {10.1051/0004-6361/202140599}, pages = {10}, year = {2022}, abstract = {Meter-sized ground-based telescopes are frequently used today for the follow-up of extrasolar planet candidates. While the transit signal of a Jupiter-sized object can typically be detected to a high level of confidence with small telescope apertures as well, the shallow transit dips of planets with the size of Neptune and smaller are more challenging to reveal. We employ new observational data to illustrate the photometric follow-up capabilities of meter-sized telescopes for shallow exoplanet transits. We describe in detail the capability of distinguishing the photometric signal of an exoplanet transit from an underlying trend in the light curve. The transit depths of the six targets we observed, Kepler-94b, Kepler-63b, K2-100b, K2-138b, K2-138c, and K2-138e, range from 3.9 ppt down to 0.3 ppt. For five targets of this sample, we provide the first ground-based photometric follow-up. The timing of three targets is precisely known from previous observations, and the timing of the other three targets is uncertain and we aim to constrain it. We detect or rule out the transit features significantly in single observations for the targets that show transits of 1.3 ppt or deeper. The shallower transit depths of two targets of 0.6 and 0.8 ppt were detected tentatively in single light curves, and were detected significantly by repeated observations. Only for the target of the shallowest transit depth of 0.3 ppt were we unable to draw a significant conclusion despite combining five individual light curves. An injection-recovery test on our real data shows that we detect transits of 1.3 ppt depth significantly in single light curves if the transit is fully covered, including out-of-transit data toward both sides, in some cases down to 0.7 ppt depth. For Kepler-94b, Kepler-63b, and K2-100b, we were able to verify the ephemeris. In the case of K2-138c with a 0.6 ppt deep transit, we were able to refine it, and in the case of K2-138e, we ruled out the transit in the time interval of more than ±1.5 σ of its current literature ephemeris.}, language = {en} } @article{Poppenhaeger2022, author = {Poppenh{\"a}ger, Katja}, title = {Helium absorption in exoplanet atmospheres is connected to stellar coronal abundances}, series = {Monthly notices of the Royal Astronomical Society}, volume = {512}, journal = {Monthly notices of the Royal Astronomical Society}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0035-8711}, doi = {10.1093/mnras/stac507}, pages = {1751 -- 1764}, year = {2022}, abstract = {Transit observations in the helium triplet around 10 830 Angstrom are a successful tool to study exoplanetary atmospheres and their mass loss. Forming those lines requires ionization and recombination of helium in the exoplanetary atmosphere. This ionization is caused by stellar photons at extreme ultraviolet (EUV) wavelengths; however, no currently active telescopes can observe this part of the stellar spectrum. The relevant part of the stellar EUV spectrum consists of individual emission lines, many of them being formed by iron at coronal temperatures. The stellar iron abundance in the corona is often observed to be depleted for high-activity low-mass stars due to the first ionization potential (FIP) effect. I show that stars with high versus low coronal iron abundances follow different scaling laws that tie together their X-ray emission and the narrow-band EUV flux that causes helium ionization. I also show that the stellar iron to oxygen abundance ratio in the corona can be measured reasonably well from X-ray CCD spectra, yielding similar results to high-resolution X-ray observations. Taking coronal iron abundance into account, the currently observed large scatter in the relationship of EUV irradiation with exoplanetary helium transit depths can be reduced, improving the target selection criteria for exoplanet transmission spectroscopy. In particular, previously puzzling non-detections of helium for Neptunic exoplanets are now in line with expectations from the revised scaling laws.}, language = {en} } @article{NematiHenkelAnders2022, author = {Nemati, Somayyeh and Henkel, Carsten and Anders, Janet}, title = {Coupling function from bath density of states}, series = {epl : a letters journal exploring the frontiers of physics}, volume = {139}, journal = {epl : a letters journal exploring the frontiers of physics}, number = {3}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0295-5075}, doi = {10.1209/0295-5075/ac7b42}, pages = {7}, year = {2022}, abstract = {Modelling of an open quantum system requires knowledge of parameters that specify how it couples to its environment. However, beyond relaxation rates, realistic parameters for specific environments and materials are rarely known. Here we present a method of inferring the coupling between a generic system and its bosonic (e.g., phononic) environment from the experimentally measurable density of states (DOS). With it we confirm that the DOS of the well-known Debye model for three-dimensional solids is physically equivalent to choosing an Ohmic bath. We further match a real phonon DOS to a series of Lorentzian coupling functions, allowing us to determine coupling parameters for gold, yttrium iron garnet (YIG) and iron as examples. The results illustrate how to obtain material-specific dynamical properties, such as memory kernels. The proposed method opens the door to more accurate modelling of relaxation dynamics, for example for phonon-dominated spin damping in magnetic materials.}, language = {en} } @article{BonettoPoundSam2022, author = {Bonetto, Riccardo and Pound, Adam and Sam, Zeyd}, title = {Deformed Schwarzschild horizons in second-order perturbation theory}, series = {Physical review D, Particles, fields, gravitation, and cosmology}, volume = {105}, journal = {Physical review D, Particles, fields, gravitation, and cosmology}, number = {2}, publisher = {American Physical Society}, address = {College Park}, issn = {2470-0010}, doi = {10.1103/PhysRevD.105.024048}, pages = {42}, year = {2022}, abstract = {In recent years, gravitational-wave astronomy has motivated increasingly accurate perturbative studies of gravitational dynamics in compact binaries. This in turn has enabled more detailed analyses of the dynamical black holes in these systems. For example, Pound et al. [Phys. Rev. Lett. 124, 021101 (2020)] recently computed the surface area of a Schwarzschild black hole's apparent horizon, perturbed by an orbiting body, to second order in the binary's mass ratio. In this paper, we take that as the starting point for a comprehensive study of a perturbed Schwarzschild black hole's apparent and event horizon at second perturbative order, deriving generic formulas for the first- and second-order corrections to the horizons' radial profiles, surface areas, Hawking masses, and intrinsic curvatures. We find that the two horizons are remarkably similar, and that any teleological behavior of the event horizon is suppressed in several ways. Critically, we establish that at all orders, the perturbed event horizon in a small-mass-ratio binary is effectively localized in time. Even more pointedly, the event horizon is identical to the apparent horizon at linear order regardless of the source of perturbation, implying that the seemingly teleological "tidal lead," previously observed in linearly perturbed event horizons, is not genuinely teleological in origin. The two horizons do generically differ at second order, but their Hawking masses remain identical, implying that the event horizon obeys the same energy-flux balance law as the apparent horizon. At least in the case of a binary system, the difference between their surface areas remains extremely small even in the late stages of inspiral. In the course of our analysis, we also numerically illustrate puzzling behavior in the black hole's motion around the binary's center of mass.}, language = {en} } @article{AwadMetzler2022, author = {Awad, Emad and Metzler, Ralf}, title = {Closed-form multi-dimensional solutions and asymptotic behaviours for subdiffusive processes with crossovers: II. Accelerating case}, series = {Journal of physics : A, Mathematical and theoretical}, volume = {55}, journal = {Journal of physics : A, Mathematical and theoretical}, number = {20}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1751-8113}, doi = {10.1088/1751-8121/ac5a90}, pages = {29}, year = {2022}, abstract = {Anomalous diffusion with a power-law time dependence vertical bar R vertical bar(2)(t) similar or equal to t(alpha i) of the mean squared displacement occurs quite ubiquitously in numerous complex systems. Often, this anomalous diffusion is characterised by crossovers between regimes with different anomalous diffusion exponents alpha(i). Here we consider the case when such a crossover occurs from a first regime with alpha(1) to a second regime with alpha(2) such that alpha(2) > alpha(1), i.e., accelerating anomalous diffusion. A widely used framework to describe such crossovers in a one-dimensional setting is the bi-fractional diffusion equation of the so-called modified type, involving two time-fractional derivatives defined in the Riemann-Liouville sense. We here generalise this bi-fractional diffusion equation to higher dimensions and derive its multidimensional propagator (Green's function) for the general case when also a space fractional derivative is present, taking into consideration long-ranged jumps (Levy flights). We derive the asymptotic behaviours for this propagator in both the short- and long-time as well the short- and long-distance regimes. Finally, we also calculate the mean squared displacement, skewness and kurtosis in all dimensions, demonstrating that in the general case the non-Gaussian shape of the probability density function changes.}, language = {en} }