@phdthesis{LauerDuenkelberg2023,
  author    = {Lauer-D{\"u}nkelberg, Gregor},
  title     = {Extensional deformation and landscape evolution of the Central Andean Plateau},
  doi       = {10.25932/publishup-61759},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-617593},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xviii, 195},
  year      = {2023},
  abstract  = {Mountain ranges can fundamentally influence the physical and and chemical processes that shape Earths' surface. With elevations of up to several kilometers they create climatic enclaves by interacting with atmospheric circulation and hydrologic systems, thus leading to a specific distribution of flora and fauna. As a result, the interiors of many Cenozoic mountain ranges are characterized by an arid climate, internally drained and sediment-filled basins, as well as unique ecosystems that are isolated from the adjacent humid, low-elevation regions along their flanks and forelands. These high-altitude interiors of orogens are often characterized by low relief and coalesced sedimentary basins, commonly referred to as plateaus, tectono-geomorphic entities that result from the complex interactions between mantle-driven geological and tectonic conditions and superposed atmospheric and hydrological processes. The efficiency of these processes and the fate of orogenic plateaus is therefore closely tied to the balance of constructive and destructive processes - tectonic uplift and erosion, respectively. In numerous geological studies it has been shown that mountain ranges are delicate systems that can be obliterated by an imbalance of these underlying forces. As such, Cenozoic mountain ranges might not persist on long geological timescales and will be destroyed by erosion or tectonic collapse. Advancing headward erosion of river systems that drain the flanks of the orogen may ultimately sever the internal drainage conditions and the maintenance of storage of sediments within the plateau, leading to destruction of plateau morphology and connectivity with the foreland. Orogenic collapse may be associated with the changeover from a compressional stress field with regional shortening and topographic growth, to a tensional stress field with regional extensional deformation and ensuing incision of the plateau. While the latter case is well-expressed by active extensional faults in the interior parts of the Tibetan Plateau and the Himalaya, for example, the former has been attributed to have breached the internally drained areas of the high-elevation sectors of the Iranian Plateau. In the case of the Andes of South America and their internally drained Altiplano-Puna Plateau, signs of both processes have been previously described. However, in the orogenic collapse scenario the nature of the extensional structures had been primarily investigated in the northern and southern terminations of the plateau; in some cases, the extensional faults were even regarded to be inactive. After a shallow earthquake in 2020 within the Eastern Cordillera of Argentina that was associated with extensional deformation, the state of active deformation and the character of the stress field in the central parts of the plateau received renewed interest to explain a series of extensional structures in the northernmost sectors of the plateau in north-western Argentina. This study addresses (1) the issue of tectonic orogenic collapse of the Andes and the destruction of plateau morphology by studying the fill and erosion history of the central eastern Andean Plateau using sedimentological and geochronological data and (2) the kinematics, timing and magnitude of extensional structures that form well-expressed fault scarps in sediments of the regional San Juan del Oro surface, which is an integral part of the Andean Plateau and adjacent morphotectonic provinces to the east. Importantly, sediment properties and depositional ages document that the San Juan del Oro Surface was not part of the internally-drained Andean Plateau, but rather associated with a foreland-directed drainage system, which was modified by the Andean orogeny and that became successively incorporated into the orogen by the eastward-migration of the Andean deformation front during late Miocene - Pliocene time. Structural and geomorphic observations within the plateau indicate that extensional processes must have been repeatedly active between the late Miocene and Holocene supporting the notion of plateau-wide extensional processes, potentially associated with Mw ~ 7 earthquakes. The close relationship between extensional joints and fault orientations underscores that 3 was oriented horizontally in NW-SE direction and 1 was vertical. This unambiguously documents that the observed deformation is related to gravitational forces that drive the orogenic collapse of the plateau. Applied geochronological analyses suggest that normal faulting in the northern Puna was active at about 3 Ma, based on paired cosmogenic nuclide dating of sediment fill units. Possibly due to regional normal faulting the drainage system within the plateau was modified, promoting fluvial incision.},
  language  = {en}
}
@article{ScherlerSchwanghart2020,
  author    = {Scherler, Dirk and Schwanghart, Wolfgang},
  title     = {Drainage divide networks},
  series = {Earth surface dynamics},
  volume    = {8},
  journal   = {Earth surface dynamics},
  number    = {2},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {2196-6311},
  doi       = {10.5194/esurf-8-261-2020},
  pages     = {261 -- 274},
  year      = {2020},
  abstract  = {Drainage divides are organized into tree-like networks that may record information about drainage divide mobility. However, views diverge about how to best assess divide mobility. Here, we apply a new approach of automatically extracting and ordering drainage divide networks from digital elevation models to results from landscape evolution model experiments. We compared landscapes perturbed by strike-slip faulting and spatiotemporal variations in erodibility to a reference model to assess which topographic metrics (hillslope relief, flow distance, and chi) are diagnostic of divide mobility. Results show that divide segments that are a minimum distance of similar to 5 km from river confluences strive to attain constant values of hillslope relief and flow distance to the nearest stream. Disruptions of such patterns can be related to mobile divides that are lower than stable divides, closer to streams, and often asymmetric in shape. In general, we observe that drainage divides high up in the network, i.e., at great distances from river confluences, are more susceptible to disruptions than divides closer to these confluences and are thus more likely to record disturbance for a longer time period. We found that across-divide differences in hillslope relief proved more useful for assessing divide migration than other tested metrics. However, even stable drainage divide networks exhibit across-divide differences in any of the studied topographic metrics. Finally, we propose a new metric to quantify the connectivity of divide junctions.},
  language  = {en}
}
@phdthesis{Pons2023,
  author    = {Pons, Micha{\"e}l},
  title     = {The Nature of the tectonic shortening in Central Andes},
  doi       = {10.25932/publishup-60089},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-600892},
  school      = {Universit{\"a}t Potsdam},
  pages     = {160},
  year      = {2023},
  abstract  = {The Andean Cordillera is a mountain range located at the western South American margin and is part of the Eastern- Circum-Pacific orogenic Belt. The ~7000 km long mountain range is one of the longest on Earth and hosts the second largest orogenic plateau in the world, the Altiplano-Puna plateau. The Andes are known as a non-collisional subduction-type orogen which developed as a result of the interaction between the subducted oceanic Nazca plate and the South American continental plate. The different Andean segments exhibit along-strike variations of morphotectonic provinces characterized by different elevations, volcanic activity, deformation styles, crustal thickness, shortening magnitude and oceanic plate geometry. Most of the present-day elevation can be explained by crustal shortening in the last ~50 Ma, with the shortening magnitude decreasing from ~300 km in the central (15°S-30°S) segment to less than half that in the southern part (30°S-40°S). Several factors were proposed that might control the magnitude and acceleration of shortening of the Central Andes in the last 15 Ma. One important factor is likely the slab geometry. At 27-33°S, the slab dips horizontally at ~100 km depth due to the subduction of the buoyant Juan Fernandez Ridge, forming the Pampean flat-slab. This horizontal subduction is thought to influence the thermo-mechanical state of the Sierras Pampeanas foreland, for instance, by strengthening the lithosphere and promoting the thick-skinned propagation of deformation to the east, resulting in the uplift of the Sierras Pampeanas basement blocks. The flat-slab has migrated southwards from the Altiplano latitude at ~30 Ma to its present-day position and the processes and consequences associated to its passage on the contemporaneous acceleration of the shortening rate in Central Andes remain unclear. Although the passage of the flat-slab could offer an explanation to the acceleration of the shortening, the timing does not explain the two pulses of shortening at about 15 Ma and 4 Ma that are suggested from geological observations. I hypothesize that deformation in the Central Andes is controlled by a complex interaction between the subduction dynamics of the Nazca plate and the dynamic strengthening and weakening of the South American plate due to several upper plate processes. To test this hypothesis, a detailed investigation into the role of the flat-slab, the structural inheritance of the continental plate, and the subduction dynamics in the Andes is needed. Therefore, I have built two classes of numerical thermo-mechanical models: (i) The first class of models are a series of generic E-W-oriented high-resolution 2D subduction models thatinclude flat subduction in order to investigate the role of the subduction dynamics on the temporal variability of the shortening rate in the Central Andes at Altiplano latitudes (~21°S). The shortening rate from the models was then validated with the observed tectonic shortening rate in the Central Andes. (ii) The second class of models are a series of 3D data-driven models of the present-day Pampean flat-slab configuration and the Sierras Pampeanas (26-42°S). The models aim to investigate the relative contribution of the present-day flat subduction and inherited structures in the continental lithosphere on the strain localization. Both model classes were built using the advanced finite element geodynamic code ASPECT. The first main finding of this work is to suggest that the temporal variability of shortening in the Central Andes is primarily controlled by the subduction dynamics of the Nazca plate while it penetrates into the mantle transition zone. These dynamics depends on the westward velocity of the South American plate that provides the main crustal shortening force to the Andes and forces the trench to retreat. When the subducting plate reaches the lower mantle, it buckles on it-self until the forced trench retreat causes the slab to steepen in the upper mantle in contrast with the classical slab-anchoring model. The steepening of the slab hinders the trench causing it to resist the advancing South American plate, resulting in the pulsatile shortening. This buckling and steepening subduction regime could have been initiated because of the overall decrease in the westwards velocity of the South American plate. In addition, the passage of the flat-slab is required to promote the shortening of the continental plate because flat subduction scrapes the mantle lithosphere, thus weakening the continental plate. This process contributes to the efficient shortening when the trench is hindered, followed by mantle lithosphere delamination at ~20 Ma. Finally, the underthrusting of the Brazilian cratonic shield beneath the orogen occurs at ~11 Ma due to the mechanical weakening of the thick sediments covered the shield margin, and due to the decreasing resistance of the weakened lithosphere of the orogen. The second main finding of this work is to suggest that the cold flat-slab strengthens the overriding continental lithosphere and prevents strain localization. Therefore, the deformation is transmitted to the eastern front of the flat-slab segment by the shear stress operating at the subduction interface, thus the flat-slab acts like an indenter that "bulldozes" the mantle-keel of the continental lithosphere. The offset in the propagation of deformation to the east between the flat and steeper slab segments in the south causes the formation of a transpressive dextral shear zone. Here, inherited faults of past tectonic events are reactivated and further localize the deformation in an en-echelon strike-slip shear zone, through a mechanism that I refer to as "flat-slab conveyor". Specifically, the shallowing of the flat-slab causes the lateral deformation, which explains the timing of multiple geological events preceding the arrival of the flat-slab at 33°S. These include the onset of the compression and of the transition between thin to thick-skinned deformation styles resulting from the crustal contraction of the crust in the Sierras Pampeanas some 10 and 6 Myr before the Juan Fernandez Ridge collision at that latitude, respectively.},
  language  = {en}
}
@phdthesis{Metzger2023,
  author    = {Metzger, Sabrina},
  title     = {Neotectonic deformation over space and time as observed by space-based geodesy},
  doi       = {10.25932/publishup-59922},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-599225},
  school      = {Universit{\"a}t Potsdam},
  pages     = {V, 217},
  year      = {2023},
  abstract  = {Alfred Wegeners ideas on continental drift were doubted for several decades until the discovery of polarization changes at the Atlantic seafloor and the seismic catalogs imaging oceanic subduction underneath the continental crust (Wadati-Benioff Zone). It took another 20 years until plate motion could be directly observed and quantified by using space geodesy. Since then, it is unthinkable to do neotectonic research without the use of satellite-based methods. Thanks to a tremendeous increase of instrumental observations in space and time over the last decades we significantly increased our knowledge on the complexity of the seismic cycle, that is, the interplay of tectonic stress build up and release. Our classical assumption, earthquakes were the only significant phenomena of strain release previously accumulated in a linear fashion, is outdated. We now know that this concept is actually decorated with a wide range of slow and fast processes such as triggered slip, afterslip, post-seismic and visco-elastic relaxation of the lower crust, dynamic pore-pressure changes in the elastic crust, aseismic creep, slow slip events and seismic swarms. On the basis of eleven peer-reviewed papers studies I here present the diversity of crustal deformation processes. Based on time-series analyses of radar imagery and satellited-based positioning data I quantify tectonic surface deformation and use numerical and analytical models and independent geologic and seismologic data to better understand the underlying crustal processes. The main part of my work focuses on the deformation observed in the Pamir, the Hindu Kush and the Tian Shan that together build the highly active continental collision zone between Northwest-India and Eurasia. Centered around the Sarez earthquake that ruptured the center of the Pamir in 2015 I present diverse examples of crustal deformation phenomena. Driver of the deformation is the Indian indenter, bulldozing into the Pamir, compressing the orogen that then collapses westward into the Tajik depression. A second natural observatory of mine to study tectonic deformation is the oceanic subduction zone in Chile that repeatedly hosts large earthquakes of magnitude 8 and more. These are best to study post-seismic relaxation processes and coupling of large earthquake. My findings nicely illustrate how complex fashion and how much the different deformation phenomena are coupled in space and time. My publications contribute to the awareness that the classical concept of the seismic cycle needs to be revised, which, in turn, has a large influence in the classical, probabilistic seismic hazard assessment that primarily relies on statistically solid recurrence times.},
  language  = {en}
}
@article{MorishitaLazeckyWrightetal.2020,
  author    = {Morishita, Yu and Lazecky, Milan and Wright, Tim J. and Weiss, Jonathan R. and Elliott, John R. and Hooper, Andy},
  title     = {LiCSBAS},
  series = {Remote sensing},
  volume    = {12},
  journal   = {Remote sensing},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2072-4292},
  doi       = {10.3390/rs12030424},
  pages     = {29},
  year      = {2020},
  abstract  = {For the past five years, the 2-satellite Sentinel-1 constellation has provided abundant and useful Synthetic Aperture Radar (SAR) data, which have the potential to reveal global ground surface deformation at high spatial and temporal resolutions. However, for most users, fully exploiting the large amount of associated data is challenging, especially over wide areas. To help address this challenge, we have developed LiCSBAS, an open-source SAR interferometry (InSAR) time series analysis package that integrates with the automated Sentinel-1 InSAR processor (LiCSAR). LiCSBAS utilizes freely available LiCSAR products, and users can save processing time and disk space while obtaining the results of InSAR time series analysis. In the LiCSBAS processing scheme, interferograms with many unwrapping errors are automatically identified by loop closure and removed. Reliable time series and velocities are derived with the aid of masking using several noise indices. The easy implementation of atmospheric corrections to reduce noise is achieved with the Generic Atmospheric Correction Online Service for InSAR (GACOS). Using case studies in southern Tohoku and the Echigo Plain, Japan, we demonstrate that LiCSBAS applied to LiCSAR products can detect both large-scale (>100 km) and localized (similar to km) relative displacements with an accuracy of <1 cm/epoch and similar to 2 mm/yr. We detect displacements with different temporal characteristics, including linear, periodic, and episodic, in Niigata, Ojiya, and Sanjo City, respectively. LiCSBAS and LiCSAR products facilitate greater exploitation of globally available and abundant SAR datasets and enhance their applications for scientific research and societal benefit.},
  language  = {en}
}
@phdthesis{Riedl2021,
  author    = {Riedl, Simon},
  title     = {Active tectonics in the Kenya Rift},
  doi       = {10.25932/publishup-53855},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-538552},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 207},
  year      = {2021},
  abstract  = {Magmatische und tektonisch aktive Grabenzonen (Rifts) stellen die Vorstufen entstehender Plattengrenzen dar. Diese sich spreizenden tektonischen Provinzen zeichnen sich durch allgegenw{\"a}rtige Abschiebungen aus, und die r{\"a}umliche Verteilung, die Geometrie, und das Alter dieser Abschiebungen l{\"a}sst R{\"u}ckschl{\"u}sse auf die r{\"a}umlichen und zeitlichen Zusammenh{\"a}nge zwischen tektonischer Deformation, Magmatismus und langwelliger Krustendeformation in Rifts zu. Diese Arbeit konzentriert sich auf die St{\"o}rungsaktivit{\"a}t im Kenia-Rift des k{\"a}nozoischen Ostafrikanischen Grabensystems im Zeitraum zwischen dem mittleren Pleistoz{\"a}n und dem Holoz{\"a}n. Um die fr{\"u}hen Stadien der Entstehung kontinentaler Plattengrenzen zu untersuchen, wird in dieser Arbeit eine zeitlich gemittelte minimale Extensionsrate f{\"u}r den inneren Graben des N{\"o}rdlichen Kenia-Rifts (NKR) f{\"u}r die letzten 0,5 Mio Jahre abgeleitet. Die Analyse beruht auf Messungen mit Hilfe des digitalen TanDEM-X-H{\"o}henmodells, um die Abschiebungen entlang der vulkanisch-tektonischen Achse des inneren Grabens des NKR zu kartieren und deren Versatzbetr{\"a}ge zu bestimmen. Mithilfe von vorhandenen Geochronologiedaten der deformierten vulkanischen Einheiten sowie in dieser Arbeit erstellten ⁴⁰Ar/³⁹Ar-Datierungen werden zeitlich gemittelte Extensionsraten berechnet. Die Auswertungen zeigen, dass im inneren Graben des NKR die langfristige Extensionsrate f{\"u}r mittelpleistoz{\"a}ne bis rezente St{\"o}rungen Mindestwerte von 1,0 bis 1,6 mm yr⁻¹ aufweist und lokal allerdings auch Werte bis zu 2,0 mm yr⁻¹ existieren. In Anbetracht der nahezu inaktiven Randst{\"o}rungen des NKR zeigt sich somit, dass sich die Extension auf die Region der aktiven vulkanisch-tektonischen Achse im inneren Graben konzentriert und somit ein fortgeschrittenes Stadium kontinentaler Extensionsprozesse im NKR vorliegt. In dieser Arbeit wird diese r{\"a}umlich fokussierte Extension zudem im Rahmen einer St{\"o}rungsanalyse der j{\"u}ngsten vulkanischen Erscheinungen des Kenia-Rifts betrachtet. Die Arbeit analysiert mithilfe von Gel{\"a}ndekartierungen und eines auf Luftbildern basierenden Gel{\"a}ndemodells die St{\"o}rungscharakteristika der etwa 36 tausend Jahre alten Menengai-Kaldera und der umliegenden Gebiete im zentralen Kenia-Rift. Im Allgemeinen sind die holoz{\"a}nen St{\"o}rungen innerhalb des Rifts reine, NNO-streichende Abschiebungen, die somit das gegenw{\"a}rtige tektonische Spannungsfeld wiederspiegeln; innerhalb der Menengai-Kaldera sind die jungen Strukturen jedoch von andauernder magmatischer Aktivit{\"a}t und von Aufdomung {\"u}berpr{\"a}gt. Die Kaldera befindet sich im Zentrum eines sich aktiv dehnenden Riftsegments und zusammen mit den anderen quart{\"a}ren Vulkanen des Kenia-Rifts lassen sich diese Bereiche als Kernpunkte der extensionalen St{\"o}rungsaktivit{\"a}t verstehen, die letztlich zu einer weiter entwickelten Phase magmengest{\"u}tzter Kontinentalseparation f{\"u}hren werden. Die bereits seit dem Terti{\"a}r andauernde St{\"o}rungsaktivit{\"a}t im Kenia-Rift f{\"u}hrt zur Zergliederung der gr{\"o}ßeren Rift-Senken in kleinere Segmente und beeinflusst die Sedimentologie und die Hydrologie dieser Riftbecken. Gegenw{\"a}rtig sind die meisten, durch St{\"o}rungen begrenzten Becken des Kenia-Rifts hydrologisch isoliert, sie waren aber w{\"a}hrend feuchter Klimaphasen hydrologisch miteinander verbunden; in dieser Arbeit untersuche ich deshalb auch diese hydrologische Verbindung der Rift-Becken f{\"u}r die Zeit der Afrikanischen Feuchteperiode des fr{\"u}hen Holoz{\"a}ns. Mithilfe der Analyse von digitalen Gel{\"a}ndemodellen, unter Ber{\"u}cksichtigung von geomorphologischen Anzeigern f{\"u}r Seespiegelhochst{\"a}nde, Radiokarbondatierungen und einer {\"U}bersicht {\"u}ber Fossiliendaten konnten zwei kaskadierende Flusssysteme aus diesen Daten abgeleitet werden: eine Flusskaskade in Richtung S{\"u}den und eine in Richtung Norden. Beide Kaskaden haben die derzeit isolierten Becken w{\"a}hrend des fr{\"u}hen Holoz{\"a}ns durch {\"u}berlaufende Seen und eingeschnittene Schluchten miteinander verbunden. Diese hydrologische Verbindung f{\"u}hrte zu der Ausbreitung aquatischer Fauna entlang des Rifts, und gleichzeitig stellte die Wasserscheide zwischen den beiden Flusssystemen den einzigen terrestrischen Ausbreitungskorridor dar, der eine {\"U}berquerung des Kenia-Rifts erm{\"o}glichte. Diese tektonisch-geomorphologische Rekonstruktion erkl{\"a}rt die heute isolierten Vorkommen nilotischer Fischarten in den Riftseen Kenias sowie die isolierten Vorkommen Guineo-Congolischer S{\"a}ugetiere in W{\"a}ldern {\"o}stlich des Kenia-Rifts, die sich {\"u}ber die Wasserscheide im Kenia-Rift ausbreiten konnten. Auf l{\"a}ngeren Zeitskalen sind solche Phasen hydrologischer Verbindung und Phasen der Isolation wiederholt aufgetreten und zeigen sich in wechselnden pal{\"a}o{\"o}kologischen Indikatoren in Sedimentbohrkernen. Hier stelle ich einen Sedimentbohrkern aus dem Koora-Becken des S{\"u}dlichen Kenia-Rifts vor, der einen Datensatz der Pal{\"a}o-Umweltbedingungen der letzten 1 Million Jahre beinhaltet. Dieser Datensatz zeigt, dass etwa vor 400 tausend Jahren die zuvor relativ stabilen Umweltbedingungen zum Erliegen kamen und tektonische, hydrologische und {\"o}kologische Ver{\"a}nderungen dazu f{\"u}hrten, dass die Wasserverf{\"u}gbarkeit, die Grasland-Vergesellschaftungen und die Bedeckung durch Baumvegetation zunehmend st{\"a}rkeren und h{\"a}ufigeren Schwankungen unterlagen. Diese großen Ver{\"a}nderungen fallen zeitlich mit Phasen zusammen, in denen das s{\"u}dliche Becken des Kenia-Rifts von vulkanischer und tektonischer Aktivit{\"a}t besonders betroffen war. Die vorliegende Arbeit zeigt deshalb deutlich, inwiefern die tektonischen und geomorphologischen Gegebenheiten im Zuge einer zeitlich langanhaltenden Extension die Hydrologie, die Pal{\"a}o-Umweltbedingungen sowie die Biodiversit{\"a}t einer Riftzone beeinflussen k{\"o}nnen.},
  language  = {en}
}
@article{vonSpechtHeidbachCottonetal.2018,
  author    = {von Specht, Sebastian and Heidbach, Oliver and Cotton, Fabrice Pierre and Zang, Arno},
  title     = {Uncertainty reduction of stress tensor inversion with data-driven catalogue selection},
  series = {Geophysical journal international},
  volume    = {214},
  journal   = {Geophysical journal international},
  number    = {3},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggy240},
  pages     = {2250 -- 2263},
  year      = {2018},
  abstract  = {The selection of earthquake focal mechanisms (FMs) for stress tensor inversion (STI) is commonly done on a spatial basis, that is, hypocentres. However, this selection approach may include data that are undesired, for example, by mixing events that are caused by different stress tensors when for the STI a single stress tensor is assumed. Due to the significant increase of FM data in the past decades, objective data-driven data selection is feasible, allowing more refined FM catalogues that avoid these issues and provide data weights for the STI routines. We present the application of angular classification with expectation-maximization (ACE) as a tool for data selection. ACE identifies clusters of FM without a priori information. The identified clusters can be used for the classification of the style-of-faulting and as weights of the FM data. We demonstrate that ACE effectively selects data that can be associated with a single stress tensor. Two application examples are given for weighted STI from South America. We use the resulting clusters and weights as a priori information for an STI for these regions and show that uncertainties of the stress tensor estimates are reduced significantly.},
  language  = {en}
}
@phdthesis{Barrionuevo2020,
  author    = {Barrionuevo, Mat{\´i}as},
  title     = {The role of the upper plate in the Andean tectonic evolution (33-36°S): insights from structural geology and numerical modeling},
  doi       = {10.25932/publishup-51590},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-515909},
  school      = {Universit{\"a}t Potsdam},
  pages     = {148, S2},
  year      = {2020},
  abstract  = {Los Andes Centrales del Sur (33-36°S) son un gran laboratorio para el estudio de los procesos de deformaci{\´o}n orog{\´e}nica, donde las condiciones de borde, como la geometr{\´i}a de la placa subductada, imponen un importante control sobre la deformaci{\´o}n andina. Por otro lado, la Placa Sudamericana presenta una serie de heterogeneidades que tambi{\´e}n imparten un control sobre el modo de deformaci{\´o}n. El objetivo de esta tesis es probar el control de este {\´u}ltimo factor sobre la construcci{\´o}n del sistema orog{\´e}nico andino. A partir de la integraci{\´o}n de la informaci{\´o}n superficial y de subsuelo en el {\´a}rea sur (34°-36°S), se estudi{\´o} la evoluci{\´o}n de la deformaci{\´o}n andina sobre el segmento de subducci{\´o}n normal. Se desarroll{\´o} un modelo estructural que eval{\´u}a el estado de esfuerzos desde el Mioceno hasta la actualidad, el rol de estructuras previas y su influencia en la migraci{\´o}n de fluidos. Con estos datos y publicaciones previas de la zona norte del {\´a}rea de estudio (33°-34ºS), se realiz{\´o} un modelado num{\´e}rico geodin{\´a}mico para probar la hip{\´o}tesis del papel de las heterogeneidades de la placa superior en la evoluci{\´o}n andina. Se utilizaron dos c{\´o}digos (LAPEX-2D y ASPECT) basados en elementos finitos/diferencias finitas, que simulan el comportamiento de materiales con reolog{\´i}as elastoviscopl{\´a}sticas bajo deformaci{\´o}n. Los resultados del modelado sugieren que la deformaci{\´o}n contraccional de la placa superior est{\´a} significativamente controlada por la resistencia de la lit{\´o}sfera, que est{\´a} definida por la composici{\´o}n de la corteza superior e inferior y por la proporci{\´o}n del manto litosf{\´e}rico, que a su vez est{\´a} definida por eventos tect{\´o}nicos previos. Estos eventos previos tambi{\´e}n definieron la composici{\´o}n de la corteza y su geometr{\´i}a, que es otro factor que controla la localizaci{\´o}n de la deformaci{\´o}n. Con una composici{\´o}n de corteza inferior m{\´a}s f{\´e}lsica, la deformaci{\´o}n sigue un modo de cizalla pura mientras que las composiciones m{\´a}s m{\´a}ficas provocan un modo de deformaci{\´o}n tipo cizalla simple. Por otro lado, observamos que el espesor inicial de la lit{\´o}sfera controla la localizaci{\´o}n de la deformaci{\´o}n, donde zonas con lit{\´o}sfera m{\´a}s fina es propensa a concentrar la deformaci{\´o}n. Un l{\´i}mite lit{\´o}sfera-asten{\´o}sfera asim{\´e}trico, como resultado del flujo de la cu{\~n}a mant{\´e}lica tiende a generar despegues vergentes al E.},
  language  = {en}
}
@misc{MorishitaLazeckyWrightetal.2020,
  author    = {Morishita, Yu and Lazecky, Milan and Wright, Tim J. and Weiss, Jonathan R. and Elliott, John R. and Hooper, Andy},
  title     = {LiCSBAS},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1078},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-47243},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472431},
  pages     = {31},
  year      = {2020},
  abstract  = {For the past five years, the 2-satellite Sentinel-1 constellation has provided abundant and useful Synthetic Aperture Radar (SAR) data, which have the potential to reveal global ground surface deformation at high spatial and temporal resolutions. However, for most users, fully exploiting the large amount of associated data is challenging, especially over wide areas. To help address this challenge, we have developed LiCSBAS, an open-source SAR interferometry (InSAR) time series analysis package that integrates with the automated Sentinel-1 InSAR processor (LiCSAR). LiCSBAS utilizes freely available LiCSAR products, and users can save processing time and disk space while obtaining the results of InSAR time series analysis. In the LiCSBAS processing scheme, interferograms with many unwrapping errors are automatically identified by loop closure and removed. Reliable time series and velocities are derived with the aid of masking using several noise indices. The easy implementation of atmospheric corrections to reduce noise is achieved with the Generic Atmospheric Correction Online Service for InSAR (GACOS). Using case studies in southern Tohoku and the Echigo Plain, Japan, we demonstrate that LiCSBAS applied to LiCSAR products can detect both large-scale (>100 km) and localized (~km) relative displacements with an accuracy of <1 cm/epoch and ~2 mm/yr. We detect displacements with different temporal characteristics, including linear, periodic, and episodic, in Niigata, Ojiya, and Sanjo City, respectively. LiCSBAS and LiCSAR products facilitate greater exploitation of globally available and abundant SAR datasets and enhance their applications for scientific research and societal benefit.},
  language  = {en}
}
@article{ForteWhippleBookhagenetal.2016,
  author    = {Forte, Adam M. and Whipple, Kelin X. and Bookhagen, Bodo and Rossi, Matthew W.},
  title     = {Decoupling of modern shortening rates, climate, and topography in the Caucasus},
  series = {Earth \& planetary science letters},
  volume    = {449},
  journal   = {Earth \& planetary science letters},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0012-821X},
  doi       = {10.1016/j.epsl.2016.06.013},
  pages     = {282 -- 294},
  year      = {2016},
  abstract  = {The Greater and Lesser Caucasus mountains and their associated foreland basins contain similar rock types, experience a similar two-fold, along-strike variation in mean annual precipitation, and were affected by extreme base-level drops of the neighboring Caspian Sea. However, the two Caucasus ranges are characterized by decidedly different tectonic regimes and rates of deformation that are subject to moderate (less than an order of magnitude) gradients in climate, and thus allow for a unique opportunity to isolate the effects of climate and tectonics in the evolution of topography within active orogens. There is an apparent disconnect between modern climate, shortening rates, and topography of both the Greater Caucasus and Lesser Caucasus which exhibit remarkably similar topography along-strike despite the gradients in forcing. By combining multiple datasets, we examine plausible causes for this disconnect by presenting a detailed analysis of the topography of both ranges utilizing established relationships between catchment-mean erosion rates and topography (local relief, hillslope gradients, and channel steepness) and combining it with a synthesis of previously published low-temperature thermochronologic data. Modern climate of the Caucasus region is assessed through an analysis of remotely-sensed data (TRMM and MODIS) and historical streamflow data. Because along-strike variation in either erosional efficiency or thickness of accreted material fail to explain our observations, we suggest that the topography of both the western Lesser and Greater Caucasus are partially supported by different geodynamic forces. In the western Lesser Caucasus, high relief portions of the landscape likely reflect uplift related to ongoing mantle lithosphere delamination beneath the neighboring East Anatolian Plateau. In the Greater Caucasus, maintenance of high topography in the western portion of the range despite extremely low (<2-4 mm/y) modern convergence rates may be related to dynamic topography from detachment of the north-directed Greater Caucasus slab or to a recent slowing of convergence rates. Large-scale spatial gradients in climate are not reflected in the topography of the Caucasus and do not seem to exert any significant control on the tectonics or structure of either range. (C) 2016 Elsevier B.V. All rights reserved.},
  language  = {en}
}
@phdthesis{Zapata2019,
  author    = {Zapata, Sebastian Henao},
  title     = {Paleozoic to Pliocene evolution of the Andean retroarc between 26 and 28°S: interactions between tectonics, climate, and upper plate architecture},
  doi       = {10.25932/publishup-43903},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439036},
  school      = {Universit{\"a}t Potsdam},
  pages     = {139},
  year      = {2019},
  abstract  = {Interactions and feedbacks between tectonics, climate, and upper plate architecture control basin geometry, relief, and depositional systems. The Andes is part of a longlived continental margin characterized by multiple tectonic cycles which have strongly modified the Andean upper plate architecture. In the Andean retroarc, spatiotemporal variations in the structure of the upper plate and tectonic regimes have resulted in marked along-strike variations in basin geometry, stratigraphy, deformational style, and mountain belt morphology. These along-strike variations include high-elevation plateaus (Altiplano and Puna) associated with a thin-skin fold-and-thrust-belt and thick-skin deformation in broken foreland basins such as the Santa Barbara system and the Sierras Pampeanas. At the confluence of the Puna Plateau, the Santa Barbara system and the Sierras Pampeanas, major along-strike changes in upper plate architecture, mountain belt morphology, basement exhumation, and deformation style can be recognized. I have used a source to sink approach to unravel the spatiotemporal tectonic evolution of the Andean retroarc between 26 and 28°S. I obtained a large low-temperature thermochronology data set from basement units which includes apatite fission track, apatite U-Th-Sm/He, and zircon U-Th/He (ZHe) cooling ages. Stratigraphic descriptions of Miocene units were temporally constrained by U-Pb LA-ICP-MS zircon ages from interbedded pyroclastic material. Modeled ZHe ages suggest that the basement of the study area was exhumed during the Famatinian orogeny (550-450 Ma), followed by a period of relative tectonic quiescence during the Paleozoic and the Triassic. The basement experienced horst exhumation during the Cretaceous development of the Salta rift. After initial exhumation, deposition of thick Cretaceous syn-rift strata caused reheating of several basement blocks within the Santa Barbara system. During the Eocene-Oligocene, the Andean compressional setting was responsible for the exhumation of several disconnected basement blocks. These exhumed blocks were separated by areas of low relief, in which humid climate and low erosion rates facilitated the development of etchplains on the crystalline basement. The exhumed basement blocks formed an Eocene to Oligocene broken foreland basin in the back-bulge depozone of the Andean foreland. During the Early Miocene, foreland basin strata filled up the preexisting Paleogene topography. The basement blocks in lower relief positions were reheated; associated geothermal gradients were higher than 25°C/km. Miocene volcanism was responsible for lateral variations on the amount of reheating along the Campo-Arenal basin. Around 12 Ma, a new deformational phase modified the drainage network and fragmented the lacustrine system. As deformation and rock uplift continued, the easily eroded sedimentary cover was efficiently removed and reworked by an ephemeral fluvial system, preventing the development of significant relief. After ~6 Ma, the low erodibility of the basement blocks which began to be exposed caused relief increase, leading to the development of stable fluvial systems. Progressive relief development modified atmospheric circulation, creating a rainfall gradient. After 3 Ma, orographic rainfall and high relief lead to the development of proximal fluvial-gravitational depositional systems in the surrounding basins.},
  language  = {en}
}
@phdthesis{Bande2016,
  author    = {Bande, Alejandro},
  title     = {The tectonic evolution of the western Tien Shan},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-398933},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiv, 119},
  year      = {2016},
  abstract  = {Intracontinental deformation usually is a result of tectonic forces associated with distant plate collisions. In general, the evolution of mountain ranges and basins in this environment is strongly controlled by the distribution and geometries of preexisting structures. Thus, predictive models usually fail in forecasting the deformation evolution in these kinds of settings. Detailed information on each range and basin-fill is vital to comprehend the evolution of intracontinental mountain belts and basins. In this dissertation, I have investigated the complex Cenozoic tectonic evolution of the western Tien Shan in Central Asia, which is one of the most active intracontinental ranges in the world. The work presented here combines a broad array of datasets, including thermo- and geochronology, paleoenvironmental interpretations, sediment provenance and subsurface interpretations in order to track changes in tectonic deformation. Most of the identified changes are connected and can be related to regional-scale processes that governed the evolution of the western Tien Shan. The NW-SE trending Talas-Fergana fault (TFF) separates the western from the central Tien Shan and constitutes a world-class example of the influence of preexisting anisotropies on the subsequent structural development of a contractile orogen. While to the east most of ranges and basins have a sub-parallel E-W trend, the triangular-shaped Fergana basin forms a substantial feature in the western Tien Shan morphology with ranges on all three sides. In this thesis, I present 55 new thermochronologic ages (apatite fission track and zircon (U-Th)/He)) used to constrain exhumation histories of several mountain ranges in the western Tien Shan. At the same time, I analyzed the Fergana basin-fill looking for progressive changes in sedimentary paleoenvironments, source areas and stratal geometrical configurations in the subsurface and outcrops. The data presented in this thesis suggests that low cooling rates (<1°C Myr-1), calm depositional environments, and low depositional rates (<10 m Myr-1) were widely distributed across the western Tien Shan, describing a quiescent tectonic period throughout the Paleogene. Increased cooling rates in the late Cenozoic occurred diachronously and with variable magnitudes in different ranges. This rapid cooling stage is interpreted to represent increased erosion caused by active deformation and constrains the onset of Cenozoic deformation in the western Tien Shan. Time-temperature histories derived from the northwestern Tien Shan samples show an increase in cooling rates by ~25 Ma. This event is correlated with a synchronous pulse iv in the South Tien Shan. I suggest that strike-slip motion along the TFF commenced at the Oligo-Miocene boundary, facilitating CCW rotation of the Fergana basin and enabling exhumation of the linked horsetail splays. Higher depositional rates (~150 m Myr-1) in the Oligo-Miocene section (Massaget Fm.) of the Fergana basin suggest synchronous deformation in the surrounding ranges. The central Alai Range also experienced rapid cooling around this time, suggesting that the onset of intramontane basin fragmentation and isolation is coeval. These results point to deformation starting simultaneously in the late Oligocene - early Miocene in geographically distant mountain ranges. I suggest that these early uplifts are controlled by reactivated structures (like the TFF), which are probably the frictionally weakest and most-suitably oriented for accommodating and transferring N-S horizontal shortening along the western Tien Shan. Afterwards, in the late Miocene (~10 Ma), a period of renewed rapid cooling affected the Tien Shan and most mountain ranges and inherited structures started to actively deform. This episode is widely distributed and an increase in exhumation is interpreted in most of the sampled ranges. Moreover, the Pliocene section in the basin subsurface shows the higher depositional rates (>180 m Myr-1) and higher energy facies. The deformation and exhumation increase further contributed to intramontane basin partitioning. Overall, the interpretation is that the Tien Shan and much of Central Asia suffered a global increase in the rate of horizontal crustal shortening. Previously, stress transfer along the rigid Tarim block or Pamir indentation has been proposed to account for Himalayan hinterland deformation. However, the extent of the episode requires a different and broader geodynamic driver.},
  language  = {en}
}
@article{ScherlerBookhagenStrecker2014,
  author    = {Scherler, Dirk and Bookhagen, Bodo and Strecker, Manfred},
  title     = {Tectonic control on Be-10-derived erosion rates in the Garhwal Himalaya, India},
  series = {Journal of geophysical research : Earth surface},
  volume    = {119},
  journal   = {Journal of geophysical research : Earth surface},
  number    = {2},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {2169-9003},
  doi       = {10.1002/2013JF002955},
  pages     = {83 -- 105},
  year      = {2014},
  abstract  = {Erosion in the Himalaya is responsible for one of the greatest mass redistributions on Earth and has fueled models of feedback loops between climate and tectonics. Although the general trends of erosion across the Himalaya are reasonably well known, the relative importance of factors controlling erosion is less well constrained. Here we present 25 Be-10-derived catchment-averaged erosion rates from the Yamuna catchment in the Garhwal Himalaya, northern India. Tributary erosion rates range between similar to 0.1 and 0.5mmyr(-1) in the Lesser Himalaya and similar to 1 and 2mmyr(-1) in the High Himalaya, despite uniform hillslope angles. The erosion-rate data correlate with catchment-averaged values of 5 km radius relief, channel steepness indices, and specific stream power but to varying degrees of nonlinearity. Similar nonlinear relationships and coefficients of determination suggest that topographic steepness is the major control on the spatial variability of erosion and that twofold to threefold differences in annual runoff are of minor importance in this area. Instead, the spatial distribution of erosion in the study area is consistent with a tectonic model in which the rock uplift pattern is largely controlled by the shortening rate and the geometry of the Main Himalayan Thrust fault (MHT). Our data support a shallow dip of the MHT underneath the Lesser Himalaya, followed by a midcrustal ramp underneath the High Himalaya, as indicated by geophysical data. Finally, analysis of sample results from larger main stem rivers indicates significant variability of Be-10-derived erosion rates, possibly related to nonproportional sediment supply from different tributaries and incomplete mixing in main stem channels.},
  language  = {en}
}
@article{HokeGiambiagiGarzioneetal.2014,
  author    = {Hoke, Gregory D. and Giambiagi, Laura B. and Garzione, Carmala N. and Mahoney, J. Brian and Strecker, Manfred},
  title     = {Neogene paleoelevation of intermontane basins in a narrow, compressional mountain range, southern Central Andes of Argentina},
  series = {Earth \& planetary science letters},
  volume    = {406},
  journal   = {Earth \& planetary science letters},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0012-821X},
  doi       = {10.1016/j.epsl.2014.08.032},
  pages     = {153 -- 164},
  year      = {2014},
  language  = {en}
}
@phdthesis{Schroeder2015,
  author    = {Schr{\"o}der, Sarah},
  title     = {Modelling surface evolution coupled with tectonics},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90385},
  school      = {Universit{\"a}t Potsdam},
  pages     = {viii, 129},
  year      = {2015},
  abstract  = {This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west.},
  language  = {en}
}
@phdthesis{Macaulay2013,
  author    = {Macaulay, Euan Angus},
  title     = {The orogenic evolution of the Central Kyrgyz Tien Shan},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68985},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {Intra-continental mountain belts typically form as a result of tectonic forces associated with distant plate collisions. In general, each mountain belt has a distinctive morphology and orogenic evolution that is highly dependent on the unique distribution and geometries of inherited structures and other crustal weaknesses. In this thesis, I have investigated the complex and irregular Cenozoic orogenic evolution of the Central Kyrgyz Tien Shan in Central Asia, which is presently one of the most active intra-continental mountain belts in the world. This work involved combining a broad array of datasets, including thermochronologic, magnetostratigraphic, sediment provenance and stable isotope data, to identify and date various changes in tectonic deformation, climate and surface processes. Many of these changes are linked and can ultimately be related to regional-scale processes that altered the orogenic evolution of the Central Kyrgyz Tien Shan. The Central Kyrgyz Tien Shan contains a sub-parallel series of structures that were reactivated in the late Cenozoic in response to the tectonic forces associated with the distant India-Eurasia collision. Over time, slip on the various reactivated structures created the succession of mountain ranges and intermontane basins which characterises the modern morphology of the region. In this thesis, new quantitative constraints on the exhumation histories of several mountain ranges have been obtained by using low temperature thermochronological data from 95 samples (zircon (U-Th)/He, apatite fission track and (U-Th)/He). Time-temperature histories derived by modelling the thermochronologic data of individual samples identify at least two stages of Cenozoic cooling in most of the region's mountain ranges: (1) initially low cooling rates (<1°C/Myr) during the tectonic quiescent period and (2) increased cooling in the late Cenozoic, which occurred diachronously and with variable magnitude in different ranges. This second cooling stage is interpreted to represent increased erosion caused by active deformation, and in many of the sampled mountain ranges, provides the first available constraints on the timing of late Cenozoic deformation. New constraints on the timing of deformation have also been derived from the sedimentary record of intermontane basins. In the intermontane Issyk Kul basin, new magnetostratigraphic data from two sedimentary sections suggests that deposition of the first Cenozoic syn-tectonic sediments commenced at ~26 Ma. Zircon U-Pb provenance data, paleocurrent and conglomerate clast analysis reveals that these sediments were sourced from the Terskey Range to the south of the basin, suggesting that the onset of the late Cenozoic deformation occurred >26 Ma in that particular range. Elsewhere, growth strata relationships are used to identify syn-tecotnic deposition and constrain the timing of nearby deformation. Collectively, these new constraints obtained from thermochronologic and sedimentary data have allowed me to infer the spatiotemporal distribution of deformation in a transect through the Central Kyrgyz Tien Shan, and determine the order in which mountain ranges started deforming. These data suggest that deformation began in a few widely-spaced mountain ranges in the late Oligocene and early Miocene. Typically, these earlier mountain ranges are bounded on at least one side by a reactivated structure, which probably corresponds to the frictionally weakest and most suitably orientated inherited structures for accommodating the roughly north-south directed horizontal crustal shortening of the late Cenozoic. Moreover, tectonically-induced rock uplift in the Terskey Range, following the reactivation of the bounding structure before 26 Ma, likely caused significant surface uplift across the range, which in turn lead to enhanced orographic precipitation. These wetter conditions have been inferred from stable isotope data collected in the two magnetostratigraphically-dated sections in the Issyk Kul basin. Subsequently, in the late Miocene (~12‒5 Ma), more mountain ranges and inherited structures appear to have started actively deforming. Importantly, the onset of deformation at these locations in the late Miocene coincides with an increase in exhumation of ranges that had started deforming earlier in the late Oligocene‒early Miocene. Based on this observation, I have suggested that there must have been an overall increase in the rate of horizontal crustal shortening across the Central Kyrgyz Tien Shan, which likely relates to regional tectonic changes that affected much of Central Asia. Many of the mountain ranges that started deforming in the late Miocene were associated with out-of-sequence tectonic reactivation and initiation, which lead to the partitioning of larger intermontane basins. Moreover, within most of the intermontane basins in the Central Kyrgyz Tien Shan, this inferred late Miocene increase in horizontal crustal shortening occurs roughly at the same time as an increase in sedimentation rates and a significant change sediment composition. Therefore, I have suggested that the overall magnitude of deformational processes increased in the late Miocene, promoting more flexural subsidence in the intermontane basins of the Central Kyrgyz Tien Shan.},
  language  = {en}
}
@phdthesis{Kesten2004,
  author    = {Kesten, Dagmar},
  title     = {Structural observations at the southern Dead Sea Transform from seismic reflection data and ASTER satellite images},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001807},
  school      = {Universit{\"a}t Potsdam},
  year      = {2004},
  abstract  = {Die folgende Arbeit ist Teil des multidisziplin{\"a}ren Projektes DESERT (DEad SEa Rift Transect), welches seit dem Jahr 2000 im Nahen Osten durchgef{\"u}hrt wird. Dabei geht es prim{\"a}r um die Struktur der s{\"u}dlichen Dead Sea Transform (DST; Tote-Meer-Transformst{\"o}rung), Plattengrenze zwischen Afrika (Sinai) und der Arabischen Mikroplatte. Seit dem Mioz{\"a}n betr{\"a}gt der sinistrale Versatz an dieser bedeutenden aktiven Blattverschiebung mehr als 100 km. Das steilwinkelseismische (NVR) Experiment von DESERT querte die DST im Arava Tal zwischen Rotem Meer und Totem Meer, wo die Hauptst{\"o}rung auch Arava Fault genannt wird. Das 100 km lange Profil erstreckte sich von Sede Boqer/Israel im Nordwesten nach Ma'an/Jordanien im S{\"u}dosten und f{\"a}llt mit dem zentralen Teil einer weitwinkelseismischen Profillinie zusammen. Steilwinkelseismische Messungen stellen bei der Bestimmung der Krustenstruktur bis zur Krusten/Mantel-Grenze ein wichtiges Instrument dar. Obwohl es kaum m{\"o}glich ist, steilstehende St{\"o}rungszonen direkt abzubilden, geben abrupte Ver{\"a}nderungen des Reflektivit{\"a}tsmuster oder pl{\"o}tzlich endende Reflektoren indirekte Hinweise auf Transformbewegung. Da bis zum DESERT Experiment keine anderen reflexionsseismischen Messungen {\"u}ber die DST ausgef{\"u}hrt worden waren, waren wichtige Aspekte dieser Transform-Plattengrenze und der damit verbundenen Krustenstruktur nicht bekannt. Mit dem Projekt sollte deshalb untersucht werden, wie sich die DST sowohl in der oberen als auch in der unteren Kruste manifestiert. Zu den Fragestellungen geh{\"o}rte unter anderem, ob sich die DST bis in den Mantel fortsetzt und ob ein Versatz der Krusten/Mantel-Grenze beobachtet werden kann. So ein Versatz ist von anderen großen Transformst{\"o}rungen bekannt. In der vorliegenden Arbeit werden zun{\"a}chst die Methode der Steilwinkelseismik und die Datenverarbeitung kurz erl{\"a}utert, bevor die Daten geologisch interpretiert werden. Bei der Interpetation werden die Ergebnisse anderer relevanter Studien ber{\"u}cksichtigt. Geologische Gel{\"a}ndearbeiten im Gebiet des NVR Profiles ergaben, dass die Arava Fault zum Teil charakterisiert ist durch niedrige Steilstufen in den neogenen Sedimenten, durch kleine Druckr{\"u}cken oder Rhomb-Gr{\"a}ben. Ein typischer Aufbau der St{\"o}rungszone mit einem St{\"o}rungskern, einer st{\"o}rungsbezogenen Deformationszone und einem undeformierten Ausgangsgestein, wie er von anderen großen St{\"o}rungszonen beschrieben worden ist, konnte nicht gefunden werden. Deshalb wurden zur Erg{\"a}nzung der Reflexionsseismik, welche vor allem die tieferen Krustenstrukturen abbildet, ASTER (Advanced Spacebourne Thermal Emission and Reflection Radiometer) Satellitendaten herangezogen, um oberfl{\"a}chennahe Deformation und neotektonische Aktivit{\"a}t zu bestimmen.},
  language  = {en}
}