@article{RoesslerKruegerRuempkeretal.2006,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and R{\"u}mpker, Georg and Psencik, Ivan},
  title     = {Tensile source components of swarm events in West Bohemia in 2000 by considering seismic anisotropy},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12975},
  year      = {2006},
  abstract  = {Earthquake swarms occur frequently in West Bohemia, Central Europe. Their occurrence is correlated with and propably triggered by fluids that escape on the earth's surface near the epicentres. These fluids raise up periodically from a seemingbly deep-seated source in the upper mantle. Moment tensors for swarm events in 1997 indicate tensile faulting. However, they were determined under assumption of seismic isotropy although anisotropy can be observed. Anisotropy may obscure moment tensors and their interpretation. In 2000, more than 10,000 swarm earthquakes occurred near Novy Kostel, West Bohemia. Event triggering by fluid injection is likely. Activity lasted from 28/08 until 31/12/00 (9 phases) with maximum ML=3.2. High quality P-wave seismograms were used to retrieve the source mechanisms for 112 events between 28/08/00 and 30/10/00 using > 20 stations. We determine the source geometry using a new algorithm and different velocity models including anisotropy. From inversions of P waves we observe ML<3.2, strike-slip events on steep N-S oriented faults with additional normal or reverse components. Tensile components seem to be evident for more than 60\% of the processed swarm events in West Bohemia during the phases 1-7. Being most significant at great depths and at phases 1-4 during the swarm they are time and location dependent. Although tensile components are reduced when anisotropy is assumed they persist and seem to be important. They can be explained by pore-pressure changes due to the injection of fluids that raise up. Our findings agree with other observations e.g. correlation of fluid transport and seismicity, variations in b-value, forcing rate, and in pore pressure diffusion. Tests of our results show their significance.},
  language  = {en}
}
@phdthesis{Roessler2006,
  author    = {R{\"o}ßler, Dirk},
  title     = {Retrieval of earthquake source parameters in inhomogeneous anisotropic mediawith application to swarm events in West Bohemia in 2000},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7758},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60\% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting.},
  subject      = {Seismologie},
  language  = {en}
}
@phdthesis{Sen2014,
  author    = {Sen, Ali Tolga},
  title     = {Inversion of seismic source parameters for weak mining-induced and natural earthquakes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71914},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {The purpose of this thesis is to develop an automated inversion scheme to derive point and finite source parameters for weak earthquakes, here intended with the unusual meaning of earthquakes with magnitudes at the limit or below the bottom magnitude threshold of standard source inversion routines. The adopted inversion approaches entirely rely on existing inversion software, the methodological work mostly targeting the development and tuning of optimized inversion flows. The resulting inversion scheme is tested for very different datasets, and thus allows the discussion on the source inversion problem at different scales. In the first application, dealing with mining induced seismicity, the source parameters determination is addressed at a local scale, with source-sensor distance of less than 3 km. In this context, weak seismicity corresponds to event below magnitude MW 2.0, which are rarely target of automated source inversion routines. The second application considers a regional dataset, namely the aftershock sequence of the 2010 Maule earthquake (Chile), using broadband stations at regional distances, below 300 km. In this case, the magnitude range of the target aftershocks range down to MW 4.0. This dataset is here considered as a weak seismicity case, since the analysis of such moderate seismicity is generally investigated only by moment tensor inversion routines, with no attempt to resolve source duration or finite source parameters. In this work, automated multi-step inversion schemes are applied to both datasets with the aim of resolving point source parameters, both using double couple (DC) and full moment tensor (MT) models, source duration and finite source parameters. A major result of the analysis of weaker events is the increased size of resulting moment tensor catalogues, which interpretation may become not trivial. For this reason, a novel focal mechanism clustering approach is used to automatically classify focal mechanisms, allowing the investigation of the most relevant and repetitive rupture features. The inversion of the mining induced seismicity dataset reveals the repetitive occurrence of similar rupture processes, where the source geometry is controlled by the shape of the mined panel. Moreover, moment tensor solutions indicate a significant contribution of tensile processes. Also the second application highlights some characteristic geometrical features of the fault planes, which show a general consistency with the orientation of the slab. The additional inversion for source duration allowed to verify the empirical correlation for moment normalized earthquakes in subduction zones among a decreasing rupture duration with increasing source depth, which was so far only observed for larger events.},
  language  = {en}
}
@misc{DonnerRoesslerStreckeretal.2009,
  author    = {Donner, Stefanie and R{\"o}ßler, Dirk and Strecker, Manfred and Landgraf, Angela and Ballato, Paolo},
  title     = {Erweiterte Momententensorinversion und ihre seismotektonische Anwendung : Elbursgebirge, Nordiran},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29308},
  year      = {2009},
  abstract  = {Der Elburs im Norden Irans ist ein durch die Konvergenz der Arabischen und Eurasischen Platte verursachtes doppelt konvergentes Gebirge. Das komplexe System von Blattverschiebungen und {\"U}berschiebungen sowie die Aufnahme der Deformation im Elburs ist noch nicht sehr gut verstanden. Eine neu zu entwicklende Methode zur Inversion von seismischen Momententensoren, die unterschiedliche Beobachtungen verschiedener Stationstypen kombiniert invertiert, soll die bisher haupts{\"a}chlich strukturelle/geomorphologische Datengrundlage um Momententensoren auch kleinerer Magnituden (M < 4.5) erweitern. Dies ist die notwendige Grundlage f{\"u}r detaillierte seismotektonische Studien, die wiederum die Basis f{\"u}r seismische Gef{\"a}hrdungsanalysen bilden.},
  language  = {de}
}
@misc{DonnerStreckerRoessleretal.2009,
  author    = {Donner, Stefanie and Strecker, Manfred and R{\"o}ßler, Dirk and Ghods, Abdolreza and Kr{\"u}ger, Frank and Landgraf, Angela and Ballato, Paolo},
  title     = {Earthquake source models for earthquakes in Northern Iran},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-32581},
  year      = {2009},
  abstract  = {The complex system of strike-slip and thrust faults in the Alborz Mountains, Northern Iran, are not well understood yet. Mainly structural and geomorphic data are available so far. As a more extensive base for seismotectonic studies and seismic hazard analysis we plan to do a comprehensive seismic moment tensor study also from smaller magnitudes (M < 4.5) by developing a new algorithm. Here, we present first preliminary results.},
  language  = {en}
}