@article{SchneiderFritzschePuciulMalinowskaetal.2020,
  author    = {Schneider, Matthias and Fritzsche, Nora and Puciul-Malinowska, Agnieszka and Baliś, Andrzej and Mostafa, Amr and Bald, Ilko and Zapotoczny, Szczepan and Taubert, Andreas},
  title     = {Surface etching of 3D printed poly(lactic acid) with NaOH},
  series = {Polymers},
  volume    = {12},
  journal   = {Polymers},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2073-4360},
  doi       = {10.3390/polym12081711},
  pages     = {16},
  year      = {2020},
  abstract  = {The article describes a systematic investigation of the effects of an aqueous NaOH treatment of 3D printed poly(lactic acid) (PLA) scaffolds for surface activation. The PLA surface undergoes several morphology changes and after an initial surface roughening, the surface becomes smoother again before the material dissolves. Erosion rates and surface morphologies can be controlled by the treatment. At the same time, the bulk mechanical properties of the treated materials remain unaltered. This indicates that NaOH treatment of 3D printed PLA scaffolds is a simple, yet viable strategy for surface activation without compromising the mechanical stability of PLA scaffolds.},
  language  = {en}
}
@article{QiuBenjaminRamanVenkatesanetal.2020,
  author    = {Qiu, Xunlin and Benjamin, Aravindan Joseph and Raman Venkatesan, Thulasinath and Schmidt, Georg C. and Soler, Ricardo Alonso Quintana and Panicker, Pramul Muraleedhara and Gerhard, Reimund and H{\"u}bler, Arved Carl},
  title     = {Dielectric and electroacoustic assessment of screen-printed piezoelectric polymer layers as flexible transducers},
  series = {IEEE transactions on dielectrics and electrical insulation},
  volume    = {27},
  journal   = {IEEE transactions on dielectrics and electrical insulation},
  number    = {5},
  publisher = {Institute of Electrical and Electronics Engineers},
  address   = {New York, NY},
  issn      = {1070-9878},
  doi       = {10.1109/TDEI.2020.008864},
  pages     = {1683 -- 1690},
  year      = {2020},
  abstract  = {Here, piezoelectric transducers consisting of a P(VDF-TrFE) layer with either silver or PEDOT:PSS screen-printed electrodes are studied. The influence of electrodes on the dielectric and electroacoustic properties are studied in dielectric-spectroscopy and ferroelectric-hysteresis measurements. Only when both the bottom and the top electrodes are made of silver, the typical dielectric relaxation of the P(VDF-TrFE) layer is clearly observed. When one or two of the electrodes are of PEDOT:PSS, a Debye-like relaxation is present. Compared with silver electrodes, PEDOT:PSS electrodes allow for moderate self-healing. Consequently, samples with bottom and top PEDOT:PSS electrodes can be poled to saturation, while samples with silver electrodes can hardly be poled to saturation due to destructive electric breakdown. Acoustic transducer measurements show that silver electrodes facilitate higher and broader frequency operation, while PEDOT:PSS electrodes bring slightly lower total harmonic distortion. Overall, the acoustic performance shows no significant deviations between differently electroded samples so that silver electrodes do not offer any advantages for the transducers studied here due to their much higher tendency for destructive electric breakdown.},
  language  = {en}
}