@phdthesis{Bhattacharryya2006,
  author    = {Bhattacharryya, Saroj Kumar},
  title     = {Development of detector for analytical ultracentrifuge. - [korr. Fassung]},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-8215},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {In this work approaches for new detection system development for an Analytical Ultracentrifuge (AUC) were explored. Unlike its counterpart in chromatography fractionation techniques, the use of a Multidetection system for AUC has not yet been implemented to full extent despite its potential benefit. In this study we tried to couple existing fundamental spectroscopic and scattering techniques that are used in day to day science as tool for extracting analyte information. Trials were performed for adapting Raman, Light scattering and UV/Vis (with possibility to work with the whole range of wavelengths) to AUC. Conclusions were drawn for Raman and Light scattering to be a possible detection system for AUC, while the development for a fast fiber optics based multiwavelength detector was completed. The multiwavelength detector demonstrated the capability of data generation matching the literature and reference measurement data and faster data collection than that of the commercial instrument. It became obvious that with the generation of data in 3-D space in the UV/Vis detection system, the user can select the wavelength for the evaluation of experimental results as the data set contains the whole range of information from UV/Vis wavelength. The detector showed the data generation with much faster speed unlike the commercial instruments. The advantage of fast data generation was exemplified with the evaluation of data for a mixture of three colloids. These data were in conformity with measurement results from normal radial experiments and without significant diffusion broadening. Thus conclusions were drawn that with our designed Multiwavelength detector, meaningful data in 3-D space can be collected with much faster speed of data generation.},
  subject      = {Ultrazentrifuge},
  language  = {en}
}
@phdthesis{Nolte2006,
  author    = {Nolte, Marc},
  title     = {Integration of freestanding polyelectrolyte multilayer membranes in larger scale structures},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7355},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Ultrathin, semi-permeable membranes are not only essential in natural systems (membranes of cells or organelles) but they are also important for applications (separation, filtering) in miniaturized devices. Membranes, integrated as diffusion barriers or filters in micron scale devices need to fulfill equivalent requirements as the natural systems, in particular mechanical stability and functionality (e.g. permeability), while being only tens of nm in thickness to allow fast diffusion times. Promising candidates for such membranes are polyelectrolyte multilayers, which were found to be mechanically stable, and variable in functionality. In this thesis two concepts to integrate such membranes in larger scale structures were developed. The first is based on the directed adhesion of polyelectrolyte hollow microcapsules. As a result, arrays of capsules were created. These can be useful for combinatorial chemistry or sensing. This concept was expanded to couple encapsulated living cells to the surface. The second concept is the transfer of flat freestanding multilayer membranes to structured surfaces. We have developed a method that allows us to couple mm2 areas of defect free film with thicknesses down to 50 nm to structured surfaces and to avoid crumpling of the membrane. We could again use this technique to produce arrays of micron size. The freestanding membrane is a diffusion barrier for high molecular weight molecules, while small molecules can pass through the membrane and thus allows us to sense solution properties. We have shown also that osmotic pressures lead to membrane deflection. That could be described quantitatively.},
  subject      = {Polyelektrolyt},
  language  = {en}
}
@phdthesis{Franke2005,
  author    = {Franke, Danielle},
  title     = {Novel surfactants for the production of functional nanostructured materials via the ionic self-assembly (ISA) route = Neuartige Tenside f{\"u}r die Synthese funktioneller nanostrukturierter Materialien durch ionische Selbsorganisation},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6922},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {In recent years, the aim of supramolecular syntheses is not only the creation of particular structures but also the introduction of specific functions in these supramolecules. The present work describes the use of the ionic self-assembly (ISA) route to generate nanostructured materials with integrated functionality. Since the ISA strategy has proved to be a facile method for the production of liquid-crystalline materials, we investigated the phase behaviour, physical properties and function of a variety of ISA materials comprising a perylene derivative as the employed oligoelectrolyte. Functionality was introduced into the materials through the use of functional surfactants. In order to meet the requirements to produce functional ISA materials through the use of functional surfactants, we designed and synthesized pyrrole-derived monomers as surfactant building blocks. Owing to the presence of the pyrrole moiety, these surfactants are not only polymerizable but are also potentially conductive when polymerized. We adopted single-tailed and double-tailed N-substituted pyrrole monomers as target molecules. Since routine characterization analysis of the double-tailed pyrrole-containing surfactant indicated very interesting, complex phase behaviour, a comprehensive investigation of its interfacial properties and mesophase behavior was conducted. The synthesized pyrrole-derived surfactants were then employed in the synthesis of ISA complexes. The self-assembled materials were characterized and subsequently polymerized by both chemical and electrochemical methods. The changes in the structure and properties of the materials caused by the in-situ polymerization were addressed. In the second part of this work, the motif investigated was a property rather than a function. Since chiral superstructures have obtained much attention during the last few years, we investigated the possibility of chiral ISA materials through the use of chiral surfactants. Thus, the work involved synthesis of novel chiral surfactants and their incorporation in ISA materials with the aim of obtaining ionically self-assembled chiral superstructures. The results and insights presented here suggest that the presented synthesis strategy can be easily extended to incorporate any kind of charged tectonic unit with desired optical, electrical, or magnetic properties into supramolecular assemblies for practical applications.},
  subject      = {Nanotechnologie},
  language  = {en}
}
@phdthesis{Jovanovic2005,
  author    = {Jovanovic, Ljubisa},
  title     = {New synthetic approaches to 8,5'-neolignans},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6878},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {Neolignans, dehydrodimers of phenylpropenes, are natural products that exhibit different biological activities. 8,5'-Neolignans containing a trans- dihydrobenzofuran skeleton are the most abundant neolignans in nature. The published syntheses of trans-dihydrobenzofurans are multistep procedures that are time consuming and provide the product in low yield. Furthermore, all dimerisation reactions either in the presence of enzymes or mediated by metal salts are yielding dimers consisting of two units of the same phenylpropene compound, narrowing substantially the substitution pattern. Two different general synthetic approaches were examined. The first strategy was the enantioselective deprotonation at the α-carbon of the ο-alkyl phenols in the presence of a chiral diamine and sBuLi. Synthesis of several new phosphorous-based directed ortho-metalation groups was studied. The examined compounds having these new groups decomposed even under very mild reaction conditions and are not suitable for the application in the synthesis. The second strategy was to examine one [3+2] cycloaddition reaction, transition metal catalysed Heck oxyarylation reaction, in the synthetic approach to compounds having trans-dihydrobenzofuran skeleton. Palladium catalysed Heck oxyarylation reaction with halogenophenols or ortho-diazonium phenols as the starting material allowed the trans-dihydrobenzofuran compounds as the major products in acceptable yield and in one step. The products were formed under ligand free condition, as well as in the presence of some strong coordinating ligands (Ph3P). The experiments with several chiral ligands, showed that the obtained trans-dihydrobenzofurans were racemic mixtures. This result suggests formation of an achiral intermediate along the reaction pathway, which causes the lack of stereoselectivity in the products. Initially formed trans-dihydrobenzofuran compounds are the key precursors of many naturally occurring neolignans, and can be easily converted to 8,5'-neolignan derivatives.},
  subject      = {Dihydrobenzofurane},
  language  = {en}
}
@phdthesis{Andersen2005,
  author    = {Andersen, Audr{\´e}e},
  title     = {Surfactant dynamics at interfaces : a series of second harmonic generation experiments},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6553},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {Adsorption layers of soluble surfactants enable and govern a variety of phenomena in surface and colloidal sciences, such as foams. The ability of a surfactant solution to form wet foam lamellae is governed by the surface dilatational rheology. Only systems having a non-vanishing imaginary part in their surface dilatational modulus, E, are able to form wet foams. The aim of this thesis is to illuminate the dissipative processes that give rise to the imaginary part of the modulus. There are two controversial models discussed in the literature. The reorientation model assumes that the surfactants adsorb in two distinct states, differing in their orientation. This model is able to describe the frequency dependence of the modulus E. However, it assumes reorientation dynamics in the millisecond time regime. In order to assess this model, we designed a SHG pump-probe experiment that addresses the orientation dynamics. Results obtained reveal that the orientation dynamics occur in the picosecond time regime, being in strong contradiction with the two states model. The second model regards the interface as an interphase. The adsorption layer consists of a topmost monolayer and an adjacent sublayer. The dissipative process is due to the molecular exchange between both layers. The assessment of this model required the design of an experiment that discriminates between the surface compositional term and the sublayer contribution. Such an experiment has been successfully designed and results on elastic and viscoelastic surfactant provided evidence for the correctness of the model. Because of its inherent surface specificity, surface SHG is a powerful analytical tool that can be used to gain information on molecular dynamics and reorganization of soluble surfactants. They are central elements of both experiments. However, they impose several structural elements of the model system. During the course of this thesis, a proper model system has been identified and characterized. The combination of several linear and nonlinear optical techniques, allowed for a detailed picture of the interfacial architecture of these surfactants.},
  subject      = {Tensid},
  language  = {en}
}
@phdthesis{Garnier2005,
  author    = {Garnier, S{\´e}bastien},
  title     = {Novel amphiphilic diblock copolymers by RAFT-polymerization, their self-organization and surfactant properties},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6395},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {The Reversible Addition Fragmentation Chain Transfer (RAFT) process using the new RAFT agent benzyldithiophenyl acetate is shown to be a powerful polymerization tool to synthesize novel well-defined amphiphilic diblock copolymers composed of the constant hydrophobic block poly(butyl acrylate) and of 6 different hydrophilic blocks with various polarities, namely a series of non-ionic, non-ionic comb-like, anionic and cationic hydrophilic blocks. The controlled character of the polymerizations was supported by the linear increase of the molar masses with conversion, monomodal molar mass distributions with low polydispersities and high degrees of end-group functionalization. The new macro-surfactants form micelles in water, whose size and geometry strongly depend on their composition, according to dynamic and static light scattering measurements. The micellization is shown to be thermodynamically favored, due to the high incompatibility of the blocks as indicated by thermal analysis of the block copolymers in bulk. The thermodynamic state in solution is found to be in the strong or super strong segregation limit. Nevertheless, due to the low glass transition temperature of the core-forming block, unimer exchange occurs between the micelles. Despite the dynamic character of the polymeric micellar systems, the aggregation behavior is strongly dependent on the history of the sample, i.e., on the preparation conditions. The aqueous micelles exhibit high stability upon temperature cycles, except for an irreversibly precipitating block copolymer containing a hydrophilic block exhibiting a lower critical solution temperature (LCST). Their exceptional stability upon dilution indicates very low critical micelle concentrations (CMC) (below 4∙10<sup>-4 g∙L<sup>-1). All non-ionic copolymers with sufficiently long solvophobic blocks aggregated into direct micelles in DMSO, too. Additionally, a new low-toxic highly hydrophilic sulfoxide block enables the formation of inverse micelles in organic solvents. The high potential of the new polymeric surfactants for many applications is demonstrated, in comparison to reference surfactants. The diblock copolymers are weakly surface-active, as indicated by the graduate decrease of the surface tension of their aqueous solutions with increasing concentration. No CMC could be detected. Their surface properties at the air/water interface confer anti-foaming properties. The macro-surfactants synthesized are surface-active at the interface between two liquid phases, too, since they are able to stabilize emulsions. The polymeric micelles are shown to exhibit a high ability to solubilize hydrophobic substances in water.},
  subject      = {Blockcopolymere},
  language  = {en}
}
@phdthesis{Justynska2005,
  author    = {Justynska, Justyna},
  title     = {Towards a library of functional block copolymers : synthesis and colloidal properties},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5907},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {Understanding the principles of self-organisation exhibited by block copolymers requires the combination of synthetic and physicochemical knowledge. The ability to synthesise block copolymers with desired architecture facilitates the ability to manipulate their aggregation behaviour, thus providing the key to nanotechnology. Apart from relative block volumes, the size and morphology of the produced nanostructures is controlled by the effective incompatibility between the different blocks. Since polymerisation techniques allowing for the synthesis of well-defined block copolymers are restricted to a limited number of monomers, the ability to tune the incompatibility is very limited. Nevertheless, Polymer Analogue Reactions can offer another possibility for the production of functional block copolymers by chemical modifications of well-defined polymer precursors. Therefore, by applying appropriate modification methods both volume fractions and incompatibility, can be adjusted. Moreover, copolymers with introduced functional units allow utilization of the concept of molecular recognition in the world of synthetic polymers. The present work describes a modular synthetic approach towards functional block copolymers. Radical addition of functional mercaptanes was employed for the introduction of diverse functional groups to polybutadiene-containing block copolymers. Various modifications of 1,2-polybutadiene-poly(ethylene oxide) block copolymer precursors are described in detail. Furthermore, extension of the concept to 1,2-polybutadiene-polystyrene block copolymers is demonstrated. Further investigations involved the self-organisation of the modified block copolymers. Formed aggregates in aqueous solutions of block copolymers with introduced carboxylic acid, amine and hydroxyl groups as well as fluorinated chains were characterised. Study of the aggregation behaviour allowed general conclusions to be drawn regarding the influence of the introduced groups on the self-organisation of the modified copolymers. Finally, possibilities for the formation of complexes, based on electrostatic or hydrogen-bonding interactions in mixtures of block copolymers bearing mutually interacting functional groups, were investigated.},
  subject      = {Blockcopolymere},
  language  = {en}
}
@phdthesis{Garnweitner2005,
  author    = {Garnweitner, Georg},
  title     = {Nichtw{\"a}ssrige Synthese und Bildungsmechanismus von {\"U}bergangsmetalloxid-Nanopartikeln = Nonaqueous synthesis of transition-metal oxide nanoparticles and their formation mechanism},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5892},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {In this work, the nonaqueous synthesis of binary and ternary metal oxide nanoparticles is investigated for a number of technologically important materials. A strong focus was put on studying the reaction mechanisms leading to particle formation upon solvothermal treatment of the precursors, as an understanding of the formation processes is expected to be crucial for a better control of the systems, offering the potential to tailor particle size and morphology. The synthesis of BaTiO3 was achieved by solvothermal reaction of metallic barium and titanium isopropoxide in organic solvents. Phase-pure, highly crystalline particles about 6 nm in size resulted in benzyl alcohol, whereas larger particles could be obtained in ketones such as acetone or acetophenone. In benzyl alcohol, a novel mechanism was found to lead to BaTiO3, involving a C-C coupling step between the isopropoxide ligand and the benzylic carbon of the solvent. The resulting coupling product, 4-phenyl-2-butanol, is found in almost stoichiometric yield. The particle formation in ketones proceeds via a Ti-mediated aldol condensation of the solvent, involving formal elimination of water which induces formation of the oxide. These processes also occurred when reacting solely the titanium alkoxide with ketones or aldehydes, leading to highly crystalline anatase nanoparticles for all tested solvents. In ketones, also the synthesis of nanopowders of lead zirconate titanate (PZT) was achieved, which were initially amorphous but could be crystallized by calcination at moderate temperatures. Additionally, PZT films were prepared by simply casting a suspension of the powder onto Si substrates followed by calcination.Solvothermal synthesis however is not restricted to alkoxides as precursors but is also achieved from metal acetylacetonates. The use of benzylamine as solvent proved particularly versatile, making possible the synthesis of nanocrystalline In2O3, Ga2O3, ZnO and iron oxide from the respective acetylacetonates. During the synthesis, the acetylacetonate ligand undergoes a solvolysis under C-C cleavage, resulting in metal-bound enolate ligands which, in analogy to the synthesis in ketones, induce ketimine and aldol condensation reactions. In the last section of this work, surface functionalization of anatase nanoparticles is explored. The particles were first capped with various organic ligands via a facile in situ route, which resulted in altered properties such as enhanced dispersibility in various solvents. In a second step, short functional oligopeptide segments were attached to the particles by means of a catechol linker to achieve advanced self-assembly properties.},
  subject      = {Nanopartikel},
  language  = {en}
}
@phdthesis{Nozari2005,
  author    = {Nozari, Samira},
  title     = {Towards understanding RAFT aqueous heterophase polymerization},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5801},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {Reversible addition-fragmentation transfer (RAFT) was used as a controlling technique for studying the aqueous heterophase polymerization. The polymerization rates obtained by calorimetric investigation of ab initio emulsion polymerization of styrene revealed the strong influence of the type and combination of the RAFT agent and initiator on the polymerization rate and its profile. The studies in all-glass reactors on the evolution of the characteristic data such as average molecular weight, molecular weight distribution, and average particle size during the polymerization revealed the importance of the peculiarities of the heterophase system such as compartmentalization, swelling, and phase transfer. These results illustrated the important role of the water solubility of the initiator in determining the main loci of polymerization and the crucial role of the hydrophobicity of the RAFT agent for efficient transportation to the polymer particles. For an optimum control during ab-initio batch heterophase polymerization of styrene with RAFT, the RAFT agent must have certain hydrophilicity and the initiator must be water soluble in order to minimize reactions in the monomer phase. An analytical method was developed for the quantitative measurements of the sorption of the RAFT agents to the polymer particles based on the absorption of the visible light by the RAFT agent. Polymer nanoparticles, temperature, and stirring were employed to simulate the conditions of a typical aqueous heterophase polymerization system. The results confirmed the role of the hydrophilicity of the RAFT agent on the effectiveness of the control due to its fast transportation to the polymer particles during the initial period of polymerization after particle nucleation. As the presence of the polymer particles were essential for the transportation of the RAFT agents into the polymer dispersion, it was concluded that in an ab initio emulsion polymerization the transport of the hydrophobic RAFT agent only takes place after the nucleation and formation of the polymer particles. While the polymerization proceeds and the particles grow the rate of the transportation of the RAFT agent increases with conversion until the free monomer phase disappears. The degradation of the RAFT agent by addition of KPS initiator revealed unambigueous evidence on the mechanism of entry in heterophase polymerization. These results showed that even extremely hydrophilic primary radicals, such as sulfate ion radical stemming from the KPS initiator, can enter the polymer particles without necessarily having propagated and reached a certain chain length. Moreover, these results recommend the employment of azo-initiators instead of persulfates for the application in seeded heterophase polymerization with RAFT agents. The significant slower rate of transportation of the RAFT agent to the polymer particles when its solvent (styrene) was replaced with a more hydrophilic monomer (methyl methacrylate) lead to the conclusion that a complicated cooperative and competitive interplay of solubility parameters and interaction parameter with the particles exist, determining an effective transportation of the organic molecules to the polymer particles through the aqueous phase. The choice of proper solutions of even the most hydrophobic organic molecules can provide the opportunity of their sorption into the polymer particles. Examples to support this idea were given by loading the extremely stiff fluorescent molecule, pentacene, and very hydrophobic dye, Sudan IV, into the polymer particles. Finally, the first application of RAFT at room temperature heterophase polymerization is reported. The results show that the RAFT process is effective at ambient temperature; however, the rate of fragmentation is significantly slower. The elevation of the reaction temperature in the presence of the RAFT agent resulted in faster polymerization and higher molar mass, suggesting that the fragmentation rate coefficient and its dependence on the temperature is responsible for the observed retardation.},
  subject      = {Heterophasenpolymerisation},
  language  = {en}
}
@phdthesis{Maltseva2005,
  author    = {Maltseva, Elena},
  title     = {Model membrane interactions with ions and peptides at the air/water interface},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5670},
  school      = {Universit{\"a}t Potsdam},
  year      = {2005},
  abstract  = {The interactions between peptides and lipids are of fundamental importance in the functioning of numerous membrane-mediated biochemical processes including antimicrobial peptide action, hormone-receptor interactions, drug bioavailability across the blood-brain barrier and viral fusion processes. Alteration of peptide structure could be a cause of many diseases. Biological membranes are complex systems, therefore simplified models may be introduced in order to understand processes occurring in nature. The lipid monolayers at the air/water interface are suitable model systems to mimic biological membranes since many parameters can be easily controlled. In the present work the lipid monolayers were used as a model membrane and their interactions with two different peptides B18 and Amyloid beta (1-40) peptide were investigated. B18 is a synthetic peptide that binds to lipid membranes that leads to the membrane fusion. It was demonstrated that it adopts different structures in the aqueous solutions and in the membrane interior. It is unstructured in solutions and forms alpha-helix at the air/water interface or in the membrane bound state. The peptide has affinity to the negatively charged lipids and even can fold into beta-sheet structure in the vicinity of charged membranes at high peptide to lipid ratio. It was elucidated that in the absence of electrostatic interactions B18 does not influence on the lipid structure, whereas it provides partial liquidization of the negatively charged lipids. The understanding of mechanism of the peptide action in model system may help to develop the new type of antimicrobial peptides as well as it can shed light on the general mechanisms of peptide/membrane binding. The other studied peptide - Amyloid beta (1-40) peptide, which is the major component of amyloid plaques found in the brain of patients with Alzheimer's disease. Normally the peptide is soluble and is not toxic. During aging or as a result of the disease it aggregates and shows a pronounced neurotoxicity. The peptide aggregation involves the conformational transition from a random coil or alpha-helix to beta-sheets. Recently it was demonstrated that the membrane can play a crucial role for the peptide aggregation and even more the peptide can cause the change in the cell membranes that leads to a neuron death. In the present studies the structure of the membrane bound Amyloid beta peptide was elucidated. It was found that the peptide adopts the beta-sheet structure at the air/water interface or being adsorbed on lipid monolayers, while it can form alpha-helical structure in the presence of the negatively charged vesicles. The difference between the monolayer system and the bulk system with vesicles is the peptide to lipid ratio. The peptide adopts the helical structure at low peptide to lipid ratio and folds into beta-sheet at high ratio. Apparently, Abeta peptide accumulation in the brain is concentration driven. Increasing concentration leads to a change in the lipid to peptide ratio that induces the beta-sheet formation. The negatively charged lipids can act as seeds in the plaque formation, the peptide accumulates on the membrane and when the peptide to lipid ratio increases it the peptide forms toxic beta-sheet containing aggregates.},
  subject      = {Lipide},
  language  = {en}
}