@article{AndersSaitHorsley2022, author = {Anders, Janet and Sait, Connor R. J. and Horsley, Simon A. R.}, title = {Quantum Brownian motion for magnets}, series = {New journal of physics : the open-access journal for physics}, volume = {24}, journal = {New journal of physics : the open-access journal for physics}, number = {3}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1367-2630}, doi = {10.1088/1367-2630/ac4ef2}, pages = {21}, year = {2022}, abstract = {Spin precession in magnetic materials is commonly modelled with the classical phenomenological Landau-Lifshitz-Gilbert (LLG) equation. Based on a quantized three-dimensional spin + environment Hamiltonian, we here derive a spin operator equation of motion that describes precession and includes a general form of damping that consistently accounts for memory, coloured noise and quantum statistics. The LLG equation is recovered as its classical, Ohmic approximation. We further introduce resonant Lorentzian system-reservoir couplings that allow a systematic comparison of dynamics between Ohmic and non-Ohmic regimes. Finally, we simulate the full non-Markovian dynamics of a spin in the semi-classical limit. At low temperatures, our numerical results demonstrate a characteristic reduction and flattening of the steady state spin alignment with an external field, caused by the quantum statistics of the environment. The results provide a powerful framework to explore general three-dimensional dissipation in quantum thermodynamics.}, language = {en} } @phdthesis{Kovacs2022, author = {Kov{\´a}cs, R{\´o}bert}, title = {Human-scale personal fabrication}, doi = {10.25932/publishup-55539}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-555398}, school = {Universit{\"a}t Potsdam}, pages = {139}, year = {2022}, abstract = {The availability of commercial 3D printers and matching 3D design software has allowed a wide range of users to create physical prototypes - as long as these objects are not larger than hand size. However, when attempting to create larger, "human-scale" objects, such as furniture, not only are these machines too small, but also the commonly used 3D design software is not equipped to design with forces in mind — since forces increase disproportionately with scale. In this thesis, we present a series of end-to-end fabrication software systems that support users in creating human-scale objects. They achieve this by providing three main functions that regular "small-scale" 3D printing software does not offer: (1) subdivision of the object into small printable components combined with ready-made objects, (2) editing based on predefined elements sturdy enough for larger scale, i.e., trusses, and (3) functionality for analyzing, detecting, and fixing structural weaknesses. The presented software systems also assist the fabrication process based on either 3D printing or steel welding technology. The presented systems focus on three levels of engineering challenges: (1) fabricating static load-bearing objects, (2) creating mechanisms that involve motion, such as kinematic installations, and finally (3) designing mechanisms with dynamic repetitive movement where power and energy play an important role. We demonstrate and verify the versatility of our systems by building and testing human-scale prototypes, ranging from furniture pieces, pavilions, to animatronic installations and playground equipment. We have also shared our system with schools, fablabs, and fabrication enthusiasts, who have successfully created human-scale objects that can withstand with human-scale forces.}, language = {en} } @article{ZhangCaoXuetal.2022, author = {Zhang, Naimeng and Cao, Xianyong and Xu, Qinghai and Huang, Xiaozhong and Herzschuh, Ulrike and Shen, Zhongwei and Peng, Wei and Liu, Sisi and Wu, Duo and Wang, Jian and Xia, Huan and Zhang, Dongju and Chen, Fahu}, title = {Vegetation change and human-environment interactions in the Qinghai Lake Basin, northeastern Tibetan Plateau, since the last deglaciation}, series = {Catena}, volume = {210}, journal = {Catena}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0341-8162}, doi = {10.1016/j.catena.2021.105892}, pages = {14}, year = {2022}, abstract = {The nature of the interaction between prehistoric humans and their environment, especially the vegetation, has long been of interest. The Qinghai Lake Basin in North China is well-suited to exploring the interactions between prehistoric humans and vegetation in the Tibetan Plateau, because of the comparatively dense distribution of archaeological sites and the ecologically fragile environment. Previous pollen studies of Qinghai Lake have enabled a detailed reconstruction of the regional vegetation, but they have provided relatively little information on vegetation change within the Qinghai Lake watershed. To address the issue we conducted a pollen-based vegetation reconstruction for an archaeological site (YWY), located on the southern shore of Qinghai Lake. We used high temporal-resolution pollen records from the YWY site and from Qinghai Lake, spanning the interval since the last deglaciation (15.3 kyr BP to the present) to quantitatively reconstruct changes in the local and regional vegetation using Landscape Reconstruction Algorithm models. The results show that, since the late glacial, spruce forest grew at high altitudes in the surrounding mountains, while the lakeshore environment was occupied mainly by shrub-steppe. From the lateglacial to the middle Holocene, coniferous woodland began to expand downslope and reached the YWY site at 7.1 kyr BP. The living environment of the local small groups of Paleolithic-Epipaleolithic humans (during 15.3-13.1 kyr BP and 9-6.4 kyr BP) changed from shrub-steppe to coniferous forest-steppe. The pollen record shows no evidence of pronounced changes in the vegetation community corresponding to human activity. However, based on a comparison of the local and regional vegetation reconstructions, low values of biodiversity and a significant increase in two indicators of vegetation degradation, Chenopodiaceae and Rosaceae, suggest that prehistoric hunters-gatherers likely disturbed the local vegetation during 9.0-6.4 kyr BP. Our findings are a preliminary attempt to study human-environment interactions at Paleolithic-Epipaleolithic sites in the region, and they contribute to ongoing environmental archaeology research in the Tibetan Plateau.}, language = {en} } @article{MarschallSkorovZakharovetal.2020, author = {Marschall, Raphael and Skorov, Yuri and Zakharov, Vladimir and Rezac, Ladislav and Gerig, Selina-Barbara and Christou, Chariton and Dadzie, S. Kokou and Migliorini, Alessandra and Rinaldi, Giovanna and Agarwal, Jessica and Vincent, Jean-Baptiste and Kappel, David}, title = {Cometary comae-surface links the physics of gas and dust from the surface to a spacecraft}, series = {Space science reviews}, volume = {216}, journal = {Space science reviews}, number = {8}, publisher = {Springer}, address = {Dordrecht}, issn = {0038-6308}, doi = {10.1007/s11214-020-00744-0}, pages = {53}, year = {2020}, abstract = {A comet is a highly dynamic object, undergoing a permanent state of change. These changes have to be carefully classified and considered according to their intrinsic temporal and spatial scales. The Rosetta mission has, through its contiguous in-situ and remote sensing coverage of comet 67P/Churyumov-Gerasimenko (hereafter 67P) over the time span of August 2014 to September 2016, monitored the emergence, culmination, and winding down of the gas and dust comae. This provided an unprecedented data set and has spurred a large effort to connect in-situ and remote sensing measurements to the surface. In this review, we address our current understanding of cometary activity and the challenges involved when linking comae data to the surface. We give the current state of research by describing what we know about the physical processes involved from the surface to a few tens of kilometres above it with respect to the gas and dust emission from cometary nuclei. Further, we describe how complex multidimensional cometary gas and dust models have developed from the Halley encounter of 1986 to today. This includes the study of inhomogeneous outgassing and determination of the gas and dust production rates. Additionally, the different approaches used and results obtained to link coma data to the surface will be discussed. We discuss forward and inversion models and we describe the limitations of the respective approaches. The current literature suggests that there does not seem to be a single uniform process behind cometary activity. Rather, activity seems to be the consequence of a variety of erosion processes, including the sublimation of both water ice and more volatile material, but possibly also more exotic processes such as fracture and cliff erosion under thermal and mechanical stress, sub-surface heat storage, and a complex interplay of these processes. Seasons and the nucleus shape are key factors for the distribution and temporal evolution of activity and imply that the heliocentric evolution of activity can be highly individual for every comet, and generalisations can be misleading.}, language = {en} } @misc{Metzler2020, author = {Metzler, Ralf}, title = {Superstatistics and non-Gaussian diffusion}, series = {The European physical journal special topics}, volume = {229}, journal = {The European physical journal special topics}, number = {5}, publisher = {Springer}, address = {Heidelberg}, issn = {1951-6355}, doi = {10.1140/epjst/e2020-900210-x}, pages = {711 -- 728}, year = {2020}, abstract = {Brownian motion and viscoelastic anomalous diffusion in homogeneous environments are intrinsically Gaussian processes. In a growing number of systems, however, non-Gaussian displacement distributions of these processes are being reported. The physical cause of the non-Gaussianity is typically seen in different forms of disorder. These include, for instance, imperfect "ensembles" of tracer particles, the presence of local variations of the tracer mobility in heteroegenous environments, or cases in which the speed or persistence of moving nematodes or cells are distributed. From a theoretical point of view stochastic descriptions based on distributed ("superstatistical") transport coefficients as well as time-dependent generalisations based on stochastic transport parameters with built-in finite correlation time are invoked. After a brief review of the history of Brownian motion and the famed Gaussian displacement distribution, we here provide a brief introduction to the phenomenon of non-Gaussianity and the stochastic modelling in terms of superstatistical and diffusing-diffusivity approaches.}, language = {en} } @article{vanVelzen2020, author = {van Velzen, Ellen}, title = {Predator coexistence through emergent fitness equalization}, series = {Ecology : a publication of the Ecological Society of America}, volume = {101}, journal = {Ecology : a publication of the Ecological Society of America}, number = {5}, publisher = {Wiley}, address = {Hoboken}, issn = {0012-9658}, doi = {10.1002/ecy.2995}, pages = {10}, year = {2020}, abstract = {The competitive exclusion principle is one of the oldest ideas in ecology and states that without additional self-limitation two predators cannot coexist on a single prey. The search for mechanisms allowing coexistence despite this has identified niche differentiation between predators as crucial: without this, coexistence requires the predators to have exactly the same R* values, which is considered impossible. However, this reasoning misses a critical point: predators' R* values are not static properties, but affected by defensive traits of their prey, which in turn can adapt in response to changes in predator densities. Here I show that this feedback between defense and predator dynamics enables stable predator coexistence without ecological niche differentiation. Instead, the mechanism driving coexistence is that prey adaptation causes defense to converge to the value where both predators have equal R* values ("fitness equalization"). This result is highly general, independent of specific model details, and applies to both rapid defense evolution and inducible defenses. It demonstrates the importance of considering long-standing ecological questions from an eco-evolutionary viewpoint, and showcases how the effects of adaptation can cascade through communities, driving diversity on higher trophic levels. These insights offer an important new perspective on coexistence theory.}, language = {en} } @article{EhrlichGaedke2020, author = {Ehrlich, Elias and Gaedke, Ursula}, title = {Coupled changes in traits and biomasses cascading through a tritrophic plankton food web}, series = {Limnology and oceanography}, volume = {65}, journal = {Limnology and oceanography}, number = {10}, publisher = {Wiley}, address = {Hoboken}, issn = {0024-3590}, doi = {10.1002/lno.11466}, pages = {2502 -- 2514}, year = {2020}, abstract = {Trait-based approaches have broadened our understanding of how the composition of ecological communities responds to environmental drivers. This research has mainly focussed on abiotic factors and competition determining the community trait distribution, while effects of trophic interactions on trait dynamics, if considered at all, have been studied for two trophic levels at maximum. However, natural food webs are typically at least tritrophic. This enables indirect interactions of traits and biomasses among multiple trophic levels leading to underexplored effects on food web dynamics. Here, we demonstrate the occurrence of mutual trait adjustment among three trophic levels in a natural plankton food web (Lake Constance) and in a corresponding mathematical model. We found highly recurrent seasonal biomass and trait dynamics, where herbivorous zooplankton increased its size, and thus its ability to counter phytoplankton defense, before phytoplankton defense actually increased. This is contrary to predictions from bitrophic systems where counter-defense of the consumer is a reaction to prey defense. In contrast, counter-defense of carnivores by size adjustment followed the defense of herbivores as expected. By combining observations and model simulations, we show how the reversed trait dynamics at the two lower trophic levels result from a "trophic biomass-trait cascade" driven by the carnivores. Trait adjustment between two trophic levels can therefore be altered by biomass or trait changes of adjacent trophic levels. Hence, analyses of only pairwise trait adjustment can be misleading in natural food webs, while multitrophic trait-based approaches capture indirect biomass-trait interactions among multiple trophic levels.}, language = {en} } @article{BanerjeeLipowskySanter2020, author = {Banerjee, Pallavi and Lipowsky, Reinhard and Santer, Mark}, title = {Coarse-grained molecular model for the Glycosylphosphatidylinositol anchor with and without protein}, series = {Journal of Chemical Theory and Computation}, volume = {16}, journal = {Journal of Chemical Theory and Computation}, number = {6}, publisher = {ACS Publications}, address = {Washington DC}, issn = {1549-9626}, doi = {10.1021/acs.jctc.0c00056}, pages = {15}, year = {2020}, abstract = {Glycosylphosphatidylinositol (GPI) anchors are a unique class of complex glycolipids that anchor a great variety of proteins to the extracellular leaflet of plasma membranes of eukaryotic cells. These anchors can exist either with or without an attached protein called GPI-anchored protein (GPI-AP) both in vitro and in vivo. Although GPIs are known to participate in a broad range of cellular functions, it is to a large extent unknown how these are related to GPI structure and composition. Their conformational flexibility and microheterogeneity make it difficult to study them experimentally. Simplified atomistic models are amenable to all-atom computer simulations in small lipid bilayer patches but not suitable for studying their partitioning and trafficking in complex and heterogeneous membranes. Here, we present a coarse-grained model of the GPI anchor constructed with a modified version of the MARTINI force field that is suited for modeling carbohydrates, proteins, and lipids in an aqueous environment using MARTINI's polarizable water. The nonbonded interactions for sugars were reparametrized by calculating their partitioning free energies between polar and apolar phases. In addition, sugar-sugar interactions were optimized by adjusting the second virial coefficients of osmotic pressures for solutions of glucose, sucrose, and trehalose to match with experimental data. With respect to the conformational dynamics of GPI-anchored green fluorescent protein, the accessible time scales are now at least an order of magnitude larger than for the all-atom system. This is particularly important for fine-tuning the mutual interactions of lipids, carbohydrates, and amino acids when comparing to experimental results. We discuss the prospective use of the coarse-grained GPI model for studying protein-sorting and trafficking in membrane models.}, language = {en} } @article{Omelʹchenko2020, author = {Omelʹchenko, Oleh E.}, title = {Nonstationary coherence-incoherence patterns in nonlocally coupled heterogeneous phase oscillators}, series = {Chaos : an interdisciplinary journal of nonlinear science}, volume = {30}, journal = {Chaos : an interdisciplinary journal of nonlinear science}, number = {4}, publisher = {American Institute of Physics}, address = {Melville}, issn = {1054-1500}, doi = {10.1063/1.5145259}, pages = {8}, year = {2020}, abstract = {We consider a large ring of nonlocally coupled phase oscillators and show that apart from stationary chimera states, this system also supports nonstationary coherence-incoherence patterns (CIPs). For identical oscillators, these CIPs behave as breathing chimera states and are found in a relatively small parameter region only. It turns out that the stability region of these states enlarges dramatically if a certain amount of spatially uniform heterogeneity (e.g., Lorentzian distribution of natural frequencies) is introduced in the system. In this case, nonstationary CIPs can be studied as stable quasiperiodic solutions of a corresponding mean-field equation, formally describing the infinite system limit. Carrying out direct numerical simulations of the mean-field equation, we find different types of nonstationary CIPs with pulsing and/or alternating chimera-like behavior. Moreover, we reveal a complex bifurcation scenario underlying the transformation of these CIPs into each other. These theoretical predictions are confirmed by numerical simulations of the original coupled oscillator system.}, language = {en} } @misc{BanerjeeLipowskySanter2020, author = {Banerjee, Pallavi and Lipowsky, Reinhard and Santer, Mark}, title = {Coarse-grained molecular model for the Glycosylphosphatidylinositol anchor with and without protein}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {6}, issn = {1866-8372}, doi = {10.25932/publishup-52374}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-523742}, pages = {17}, year = {2020}, abstract = {Glycosylphosphatidylinositol (GPI) anchors are a unique class of complex glycolipids that anchor a great variety of proteins to the extracellular leaflet of plasma membranes of eukaryotic cells. These anchors can exist either with or without an attached protein called GPI-anchored protein (GPI-AP) both in vitro and in vivo. Although GPIs are known to participate in a broad range of cellular functions, it is to a large extent unknown how these are related to GPI structure and composition. Their conformational flexibility and microheterogeneity make it difficult to study them experimentally. Simplified atomistic models are amenable to all-atom computer simulations in small lipid bilayer patches but not suitable for studying their partitioning and trafficking in complex and heterogeneous membranes. Here, we present a coarse-grained model of the GPI anchor constructed with a modified version of the MARTINI force field that is suited for modeling carbohydrates, proteins, and lipids in an aqueous environment using MARTINI's polarizable water. The nonbonded interactions for sugars were reparametrized by calculating their partitioning free energies between polar and apolar phases. In addition, sugar-sugar interactions were optimized by adjusting the second virial coefficients of osmotic pressures for solutions of glucose, sucrose, and trehalose to match with experimental data. With respect to the conformational dynamics of GPI-anchored green fluorescent protein, the accessible time scales are now at least an order of magnitude larger than for the all-atom system. This is particularly important for fine-tuning the mutual interactions of lipids, carbohydrates, and amino acids when comparing to experimental results. We discuss the prospective use of the coarse-grained GPI model for studying protein-sorting and trafficking in membrane models.}, language = {en} }