@article{XieMeiXuetal.2021,
  author    = {Xie, Dongjiu and Mei, Shilin and Xu, Yaolin and Quan, Ting and Haerk, Eneli and Kochovski, Zdravko and Lu, Yan},
  title     = {Efficient sulfur host based on yolk-shell iron oxide/sulfide-carbon nanospindles for lithium-sulfur batteries},
  series = {ChemSusChem : chemistry, sustainability, energy, materials},
  volume    = {14},
  journal   = {ChemSusChem : chemistry, sustainability, energy, materials},
  number    = {5},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1864-5631},
  doi       = {10.1002/cssc.202002731},
  pages     = {1404 -- 1413},
  year      = {2021},
  abstract  = {Numerous nanostructured materials have been reported as efficient sulfur hosts to suppress the problematic "shuttling" of lithium polysulfides (LiPSs) in lithium-sulfur (Li-S) batteries. However, direct comparison of these materials in their efficiency of suppressing LiPSs shuttling is challenging, owing to the structural and morphological differences between individual materials. This study introduces a simple route to synthesize a series of sulfur host materials with the same yolk-shell nanospindle morphology but tunable compositions (Fe3O4, FeS, or FeS2), which allows for a systematic investigation into the specific effect of chemical composition on the electrochemical performances of Li-S batteries. Among them, the S/FeS2-C electrode exhibits the best performance and delivers an initial capacity of 877.6 mAh g(-1) at 0.5 C with a retention ratio of 86.7 \% after 350 cycles. This approach can also be extended to the optimization of materials for other functionalities and applications.},
  language  = {en}
}
@phdthesis{FortesMartin2023,
  author    = {Fortes Mart{\´i}n, Rebeca},
  title     = {Water-in-oil microemulsions as soft-templates to mediate nanoparticle interfacial assembly into hybrid nanostructures},
  doi       = {10.25932/publishup-57180},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-571801},
  school      = {Universit{\"a}t Potsdam},
  pages     = {119},
  year      = {2023},
  abstract  = {Hybrid nanomaterials offer the combination of individual properties of different types of nanoparticles. Some strategies for the development of new nanostructures in larger scale rely on the self-assembly of nanoparticles as a bottom-up approach. The use of templates provides ordered assemblies in defined patterns. In a typical soft-template, nanoparticles and other surface-active agents are incorporated into non-miscible liquids. The resulting self-organized dispersions will mediate nanoparticle interactions to control the subsequent self-assembly. Especially interactions between nanoparticles of very different dispersibility and functionality can be directed at a liquid-liquid interface. In this project, water-in-oil microemulsions were formulated from quasi-ternary mixtures with Aerosol-OT as surfactant. Oleyl-capped superparamagnetic iron oxide and/or silver nanoparticles were incorporated in the continuous organic phase, while polyethyleneimine-stabilized gold nanoparticles were confined in the dispersed water droplets. Each type of nanoparticle can modulate the surfactant film and the inter-droplet interactions in diverse ways, and their combination causes synergistic effects. Interfacial assemblies of nanoparticles resulted after phase-separation. On one hand, from a biphasic Winsor type II system at low surfactant concentration, drop-casting of the upper phase afforded thin films of ordered nanoparticles in filament-like networks. Detailed characterization proved that this templated assembly over a surface is based on the controlled clustering of nanoparticles and the elongation of the microemulsion droplets. This process offers versatility to use different nanoparticle compositions by keeping the surface functionalization, in different solvents and over different surfaces. On the other hand, a magnetic heterocoagulate was formed at higher surfactant concentration, whose phase-transfer from oleic acid to water was possible with another auxiliary surfactant in ethanol-water mixture. When the original components were initially mixed under heating, defined oil-in-water, magnetic-responsive nanostructures were obtained, consisting on water-dispersible nanoparticle domains embedded by a matrix-shell of oil-dispersible nanoparticles. Herein, two different approaches were demonstrated to form diverse hybrid nanostructures from reverse microemulsions as self-organized dispersions of the same components. This shows that microemulsions are versatile soft-templates not only for the synthesis of nanoparticles, but also for their self-assembly, which suggest new approaches towards the production of new sophisticated nanomaterials in larger scale.},
  language  = {en}
}
@article{HenningLiebigPrietzeletal.2020,
  author    = {Henning, Ricky and Liebig, Ferenc and Prietzel, Claudia Christina and Klemke, Bastian and Koetz, Joachim},
  title     = {Gold nanotriangles with magnetite satellites},
  series = {Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects},
  volume    = {600},
  journal   = {Colloids and surfaces : an international journal devoted to the principles and applications of colloid and interface science ; A, Physicochemical and engineering aspects},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0927-7757},
  doi       = {10.1016/j.colsurfa.2020.124913},
  pages     = {7},
  year      = {2020},
  abstract  = {This work describes the synthesis of hybrid particles of gold nanotriangles (AuNTs) with magnetite nanoparticles (MNPs) by using 1-mercaptopropyl-3-trimethoxysilan (MPTMS) and L-cysteine as linker molecules. Due to the combination of superparamagnetic properties of MNPs with optical properties of the AuNTs, nanoplatelet-satellite hybrid nanostructures with combined features become available. By using MPTMS with silan groups as linker molecule a magnetic "cloud" with embedded AuNTs can be separated. In presence of L-cysteine as linker molecule at pH > pH(iso) a more unordered aggregate structure of MNPs is obtained due to the dimerization of the L-cysteine. At pH < pH(iso) water soluble positively charged AuNTs with satellite MNPs can be synthesized. The time-dependent loading with MNP satellites under release of the extinction and magnetization offer a hybrid material, which is of special relevance for biomedical applications and plasmonic catalysis.},
  language  = {en}
}
@article{HesseKlierSgarzietal.2018,
  author    = {Hesse, Julia and Klier, Dennis Tobias and Sgarzi, Massimo and Nsubuga, Anne and Bauer, Christoph and Grenzer, Joerg and H{\"u}bner, Rene and Wislicenus, Marcus and Joshi, Tanmaya and Kumke, Michael Uwe and Stephan, Holger},
  title     = {Rapid Synthesis of Sub-10nm Hexagonal NaYF4-Based Upconverting Nanoparticles using Therminol((R))66},
  series = {ChemistryOpen : including thesis treasury},
  volume    = {7},
  journal   = {ChemistryOpen : including thesis treasury},
  number    = {2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {2191-1363},
  doi       = {10.1002/open.201700186},
  pages     = {159 -- 168},
  year      = {2018},
  abstract  = {We report a simple one-pot method for the rapid preparation of sub-10nm pure hexagonal (-phase) NaYF4-based upconverting nanoparticles (UCNPs). Using Therminol((R))66 as a co-solvent, monodisperse UCNPs could be obtained in unusually short reaction times. By varying the reaction time and reaction temperature, it was possible to control precisely the particle size and crystalline phase of the UCNPs. The upconversion (UC) luminescence properties of the nanocrystals were tuned by varying the concentrations of the dopants (Nd3+ and Yb3+ sensitizer ions and Er3+ activator ions). The size and phase-purity of the as-synthesized core and core-shell nanocrystals were assessed by using complementary transmission electron microscopy, dynamic light scattering, X-ray diffraction, and small-angle X-ray scattering studies. In-depth photophysical evaluation of the UCNPs was pursued by using steady-state and time-resolved luminescence spectroscopy. An enhancement in the UC intensity was observed if the nanocrystals, doped with optimized concentrations of lanthanide sensitizer/activator ions, were further coated with an inert/active shell. This was attributed to the suppression of surface-related luminescence quenching effects.},
  language  = {en}
}
@article{QuanGoubardBretescheHaerketal.2019,
  author    = {Quan, Ting and Goubard-Bretesche, Nicolas and Haerk, Eneli and Kochovski, Zdravko and Mei, Shilin and Pinna, Nicola and Ballauff, Matthias and Lu, Yan},
  title     = {Highly Dispersible Hexagonal Carbon-MoS2-Carbon Nanoplates with Hollow Sandwich Structures for Supercapacitors},
  series = {Chemistry - a European journal},
  volume    = {25},
  journal   = {Chemistry - a European journal},
  number    = {18},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201806060},
  pages     = {4757 -- 4766},
  year      = {2019},
  abstract  = {MoS2, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon-MoS2-carbon was successfully synthesized through an L-cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS2 flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m(2) g(-1), a total pore volume of 0.677 cm(3) g(-1), and fairly small mesopores (approximate to 5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g(-1) (0.12 F cm(-2)) at a constant current density of 0.1 Ag-1; thus suggesting that hollow carbon-MoS2 carbon nanoplates are promising candidate materials for supercapacitors.},
  language  = {en}
}
@article{TaubertLerouxRabuetal.2019,
  author    = {Taubert, Andreas and Leroux, Fabrice and Rabu, Pierre and de Zea Bermudez, Veronica},
  title     = {Advanced hybrid nanomaterials},
  series = {Beilstein journal of nanotechnology},
  volume    = {10},
  journal   = {Beilstein journal of nanotechnology},
  publisher = {Beilstein-Institut zur F{\"o}rderung der Chemischen Wissenschaften},
  address   = {Frankfurt am Main},
  issn      = {2190-4286},
  doi       = {10.3762/bjnano.10.247},
  pages     = {2563 -- 2567},
  year      = {2019},
  language  = {en}
}
@misc{PacholskiAgarwalBalderasValadez2016,
  author    = {Pacholski, Claudia and Agarwal, Vivechana and Balderas-Valadez, Ruth Fabiola},
  title     = {Fabrication of porous silicon-based optical sensors using metal-assisted chemical etching},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-394426},
  pages     = {21430 -- 21434},
  year      = {2016},
  abstract  = {Optical biosensors based on porous silicon were fabricated by metal assisted chemical etching. Thereby double layered porous silicon structures were obtained consisting of porous pillars with large pores on top of a porous silicon layer with smaller pores. These structures showed a similar sensing performance in comparison to electrochemically produced porous silicon interferometric sensors.},
  language  = {en}
}
@article{OlejkoCywinskiBald2015,
  author    = {Olejko, Lydia and Cywinski, Piotr J. and Bald, Ilko},
  title     = {Ion-Selective formation of a guanine quadruplex on DNA origami structures},
  series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  volume    = {54},
  journal   = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  number    = {2},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1433-7851},
  doi       = {10.1002/anie.201409278},
  pages     = {673 -- 677},
  year      = {2015},
  abstract  = {DNA origami nanostructures are a versatile tool that can be used to arrange functionalities with high local control to study molecular processes at a single-molecule level. Here, we demonstrate that DNA origami substrates can be used to suppress the formation of specific guanine (G) quadruplex structures from telomeric DNA. The folding of telomeres into G-quadruplex structures in the presence of monovalent cations (e.g. Na+ and K+) is currently used for the detection of K+ ions, however, with insufficient selectivity towards Na+. By means of FRET between two suitable dyes attached to the 3- and 5-ends of telomeric DNA we demonstrate that the formation of G-quadruplexes on DNA origami templates in the presence of sodium ions is suppressed due to steric hindrance. Hence, telomeric DNA attached to DNA origami structures represents a highly sensitive and selective detection tool for potassium ions even in the presence of high concentrations of sodium ions.},
  language  = {en}
}
@misc{OlejkoCywińskiBald2016,
  author    = {Olejko, Lydia and Cywiński, P. J. and Bald, Ilko},
  title     = {An ion-controlled four-color fluorescent telomeric switch on DNA origami structures},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-95831},
  pages     = {10339 -- 10347},
  year      = {2016},
  abstract  = {The folding of single-stranded telomeric DNA into guanine (G) quadruplexes is a conformational change that plays a major role in sensing and drug targeting. The telomeric DNA can be placed on DNA origami nanostructures to make the folding process extremely selective for K+ ions even in the presence of high Na+ concentrations. Here, we demonstrate that the K+-selective G-quadruplex formation is reversible when using a cryptand to remove K+ from the G-quadruplex. We present a full characterization of the reversible switching between single-stranded telomeric DNA and G-quadruplex structures using F{\"o}rster resonance energy transfer (FRET) between the dyes fluorescein (FAM) and cyanine3 (Cy3). When attached to the DNA origami platform, the G-quadruplex switch can be incorporated into more complex photonic networks, which is demonstrated for a three-color and a four-color FRET cascade from FAM over Cy3 and Cy5 to IRDye700 with G-quadruplex-Cy3 acting as a switchable transmitter.},
  language  = {en}
}
@article{OlejkoCywińskiBald2016,
  author    = {Olejko, Lydia and Cywiński, Piotr J. and Bald, Ilko},
  title     = {An ion-controlled four-color fluorescent telomeric switch on DNA origami structures},
  series = {Nanoscale},
  volume    = {8},
  journal   = {Nanoscale},
  publisher = {RSC Publ.},
  address   = {Cambridge},
  issn      = {2040-3372},
  doi       = {10.1039/C6NR00119J},
  pages     = {10339 -- 10347},
  year      = {2016},
  abstract  = {The folding of single-stranded telomeric DNA into guanine (G) quadruplexes is a conformational change that plays a major role in sensing and drug targeting. The telomeric DNA can be placed on DNA origami nanostructures to make the folding process extremely selective for K+ ions even in the presence of high Na+ concentrations. Here, we demonstrate that the K+-selective G-quadruplex formation is reversible when using a cryptand to remove K+ from the G-quadruplex. We present a full characterization of the reversible switching between single-stranded telomeric DNA and G-quadruplex structures using F{\"o}rster resonance energy transfer (FRET) between the dyes fluorescein (FAM) and cyanine3 (Cy3). When attached to the DNA origami platform, the G-quadruplex switch can be incorporated into more complex photonic networks, which is demonstrated for a three-color and a four-color FRET cascade from FAM over Cy3 and Cy5 to IRDye700 with G-quadruplex-Cy3 acting as a switchable transmitter.},
  language  = {en}
}