Filtern
Volltext vorhanden
- ja (19) (entfernen)
Dokumenttyp
Schlagworte
- perovskite solar cells (4)
- phase-transitions (2)
- photoluminescence (2)
- thin films (2)
- 2D perovskites (1)
- Electronic and spintronic devices (1)
- ISOS-L-1I protocol (1)
- Perovskite solar cell (1)
- Semiconductors (1)
- anionic polymerizations (1)
Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80% and up to 25.1% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30% tandem efficiency in the near future.
Compared to their inorganic counterparts, organic semiconductors suffer from relatively low charge carrier mobilities. Therefore, expressions derived for inorganic solar cells to correlate characteristic performance parameters to material properties are prone to fail when applied to organic devices. This is especially true for the classical Shockley-equation commonly used to describe current-voltage (JV)-curves, as it assumes a high electrical conductivity of the charge transporting material. Here, an analytical expression for the JV-curves of organic solar cells is derived based on a previously published analytical model. This expression, bearing a similar functional dependence as the Shockley-equation, delivers a new figure of merit α to express the balance between free charge recombination and extraction in low mobility photoactive materials. This figure of merit is shown to determine critical device parameters such as the apparent series resistance and the fill factor.
A water soluble fluorescent polymer as a dual colour sensor for temperature and a specific protein
(2013)
We present two thermoresponsive water soluble copolymers prepared via free radical statistical copolymerization of N-isopropylacrylamide (NIPAm) and of oligo(ethylene glycol) methacrylates (OEGMAs), respectively, with a solvatochromic 7-(diethylamino)-3-carboxy-coumarin (DEAC)- functionalized monomer. In aqueous solutions, the NIPAm-based copolymer exhibits characteristic changes in its fluorescence profile in response to a change in solution temperature as well as to the presence of a specific protein, namely an anti-DEAC antibody. This polymer emits only weakly at low temperatures, but exhibits a marked fluorescence enhancement accompanied by a change in its emission colour when heated above its cloud point. Such drastic changes in the fluorescence and absorbance spectra are observed also upon injection of the anti-DEAC antibody, attributed to the specific binding of the antibody to DEAC moieties. Importantly, protein binding occurs exclusively when the polymer is in the well hydrated state below the cloud point, enabling a temperature control on the molecular recognition event. On the other hand, heating of the polymer–antibody complexes releases a fraction of the bound antibody. In the presence of the DEAC-functionalized monomer in this mixture, the released antibody competitively binds to the monomer and the antibody-free chains of the polymer undergo a more effective collapse and inter-aggregation. In contrast, the emission properties of the OEGMA-based analogous copolymer are rather insensitive to the thermally induced phase transition or to antibody binding. These opposite behaviours underline the need for a carefully tailored molecular design of responsive polymers aimed at specific applications, such as biosensing.
Derivatization of fullerene (C60) with branched aliphatic chains softens C60-based materials and enables the formation of thermotropic liquid crystals and room temperature nonvolatile liquids. This work demonstrates that by carefully tuning parameters such as type, number and substituent position of the branched chains, liquid crystalline C60 materials with mesophase temperatures suited for photovoltaic cell fabrication and room temperature nonvolatile liquid fullerenes with tunable viscosity can be obtained. In particular, compound 1, with branched chains, exhibits a smectic liquid crystalline phase extending from 84 °C to room temperature. Analysis of bulk heterojunction (BHJ) organic solar cells with a ca. 100 nm active layer of compound 1 and poly(3-hexylthiophene) (P3HT) as an electron acceptor and an electron donor, respectively, reveals an improved performance (power conversion efficiency, PCE: 1.6 ± 0.1%) in comparison with another compound, 10 (PCE: 0.5 ± 0.1%). The latter, in contrast to 1, carries linear aliphatic chains and thus forms a highly ordered solid lamellar phase at room temperature. The solar cell performance of 1 blended with P3HT approaches that of PCBM/P3HT for the same active layer thickness. This indicates that C60 derivatives bearing branched tails are a promising class of electron acceptors in soft (flexible) photovoltaic devices.
Bildung:digital
(2024)
Heute Morgen schon im Bett geswiped, geliked oder gepostet? Auf Arbeit an einer Video-Konferenz teilgenommen, eine Datenbank benutzt oder programmiert? Auf dem Heimweg schnell noch im Laden mit dem Smartphone bezahlt, Podcasts gehört und die Ausleihe der Bibliotheksbücher verlängert? Und abends auf der Couch mit dem Tablet auf ELSTER.de die Steuererklärung ausgefüllt, online geshoppt oder Rechnungen bezahlt, ehe die Streaming-Plattform mit einer Serie lockt?
Unser Leben ist durch und durch digitalisiert. Diese Veränderungen machen vieles schneller, leichter, effizienter. Doch damit Schritt zu halten, verlangt uns einiges ab und gelingt beileibe nicht allen. Es gibt Menschen, die für eine Überweisung lieber zur Bank gehen, das Programmieren den Experten überlassen, die Steuererklärung per Post schicken und das Smartphone nur zum Telefonieren benutzen. Sie wollen nicht, vielleicht können sie auch nicht. Haben es nicht gelernt. Andere, jüngere Menschen, wachsen als „Digital Natives“ inmitten digitaler Geräte, Tools und Prozesse auf. Aber können sie deshalb wirklich damit umgehen? Oder brauchen auch sie digitale Bildung?
Aber wie sieht erfolgreiche digitale Bildung eigentlich aus? Lernen wir dabei ein Tablet zu bedienen, richtig zu googeln und Excel-Tabellen zu schreiben? Möglicherweise geht es um mehr: darum, den umfassenden Wandel zu verstehen, der unsere Welt erfasst, seitdem sie in Einsen und Nullen zerlegt und virtuell neu aufgebaut wird. Aber wie lernen wir, in einer Welt der Digitalität zu leben – mit allem, was dazu gehört und zu unserem Nutzen? Für die aktuelle Ausgabe der „Portal Wissen“ haben wir uns an der Universität Potsdam umgeschaut, welche Rolle die Verbindung von Digitalisierung und Lernen in der Forschung der verschiedenen Disziplinen spielt: Wir haben mit Katharina Scheiter, Professorin für digitale Bildung, über die Zukunft in deutschen Schulen gesprochen und uns gleich von mehreren Expert*innen Beispiele dafür zeigen lassen, wie digitale Instrumente schulisches Lernen, aber auch Weiterbildung im Berufsleben verbessern können. Außerdem haben uns Forschende aus Informatik und Agrarforschung vorgeführt, wie auch gestandene Landwirte dank digitaler Hilfsmittel noch viel über ihr Land und ihre Arbeit lernen können. Wir haben mit Bildungsforschenden gesprochen, die mithilfe von Big Data analysieren, wie Jungen und Mädchen lernen und wo mögliche Ursachen für Unterschiede zu suchen sind. Die Bildungsund Politikwissenschaftlerin Nina Kolleck wiederum schaut auf Bildung vor dem Hintergrund der Globalisierung und setzt dabei auf die Auswertung von großen Mengen Social-Media- Daten.
Dabei verlieren wir natürlich die Vielfalt der Forschung an der Uni Potsdam nicht aus den Augen: Wir stellen der Strafrechtlerin Anna Albrecht 33 Fragen, begleiten eine Gruppe von Geoforschenden in den Himalaya und lassen uns erklären, welche Alternativen es bald zu Antibiotika geben könnte. Außerdem geht es in diesem Magazin um Stress und wie er uns krankmacht, die Forschung zu nachhaltiger Erzgewinnung und neue Ansätze in der Schulentwicklung.
Neu ist auch eine ganze Reihe kürzerer Beiträge, die zum Blättern und Schmökern einladen: von Forschungsnews und Personalia- Infos über fotografische Einblicke in Labore, einfache Erklärungen komplexer Phänomene und Ausblicke in die weite Forschungswelt bis hin zu einer kleinen Wissenschaftsutopie, einem persönlichen Dank an die Forschung und einem Wissenschaftscomic. All das im Namen der Bildung, versteht sich. Viel Vergnügen bei der Lektüre!
Herein, we report the chain-growth tin-free room temperature polymerization method to synthesize n-type perylene diimide-dithiophene-based conjugated polymers (PPDIT2s) suitable for solar cell and transistor applications. The palladium/electron-rich tri-tert-butylphosphine catalyst is effective to enable the chain-growth polymerization of anion-radical monomer Br-TPDIT-Br/Zn to PPDIT2 with a molecular weight up to Mw ≈ 50 kg mol−1 and moderate polydispersity. This is the second example of the polymerization of unusual anion-radical aromatic complexes formed in a reaction of active Zn and electron-deficient diimide-based aryl halides. As such, the discovered polymerization method is not a specific reactivity feature of the naphthalene-diimide derivatives but is rather a general polymerization tool. This is an important finding, given the significantly higher maximum external quantum efficiency that can be reached with PDI-based copolymers (32–45%) in all-polymer solar cells compared to NDI-based materials (15–30%). Our studies revealed that PPDIT2 synthesized by the new method and the previously published polymer prepared by step-growth Stille polycondensation show similar electron mobility and all-polymer solar cell performance. At the same time, the polymerization reported herein has several technological advantages as it proceeds relatively fast at room temperature and does not involve toxic tin-based compounds. Because several chain-growth polymerization reactions are well-suited for the preparation of well-defined multi-functional polymer architectures, the next target is to explore the utility of the discovered polymerization in the synthesis of end-functionalized polymers and block copolymers. Such materials would be helpful to improve the nanoscale morphology of polymer blends in all-polymer solar cells.
The in‐depth understanding of charge carrier photogeneration and recombination mechanisms in organic solar cells is still an ongoing effort. In donor:acceptor (bulk) heterojunction organic solar cells, charge photogeneration and recombination are inter‐related via the kinetics of charge transfer states—being singlet or triplet states. Although high‐charge‐photogeneration quantum yields are achieved in many donor:acceptor systems, only very few systems show significantly reduced bimolecular recombination relative to the rate of free carrier encounters, in low‐mobility systems. This is a serious limitation for the industrialization of organic solar cells, in particular when aiming at thick active layers. Herein, a meta‐analysis of the device performance of numerous bulk heterojunction organic solar cells is presented for which field‐dependent photogeneration, charge carrier mobility, and fill factor are determined. Herein, a “spin‐related factor” that is dependent on the ratio of back electron transfer of the triplet charge transfer (CT) states to the decay rate of the singlet CT states is introduced. It is shown that this factor links the recombination reduction factor to charge‐generation efficiency. As a consequence, it is only in the systems with very efficient charge generation and very fast CT dissociation that free carrier recombination is strongly suppressed, regardless of the spin‐related factor.
Recombination of free charge is a key process limiting the performance of solar cells. For low mobility materials, such as organic semiconductors, the kinetics of non-geminate recombination (NGR) is strongly linked to the motion of charges. As these materials possess significant disorder, thermalization of photogenerated carriers in the inhomogeneously broadened density of state distribution is an unavoidable process. Despite its general importance, knowledge about the kinetics of NGR in complete organic solar cells is rather limited. We employ time delayed collection field (TDCF) experiments to study the recombination of photogenerated charge in the high-performance polymer:fullerene blend PCDTBT:PCBM. NGR in the bulk of this amorphous blend is shown to be highly dispersive, with a continuous reduction of the recombination coefficient throughout the entire time scale, until all charge carriers have either been extracted or recombined. Rapid, contact-mediated recombination is identified as an additional loss channel, which, if not properly taken into account, would erroneously suggest a pronounced field dependence of charge generation. These findings are in stark contrast to the results of TDCF experiments on photovoltaic devices made from ordered blends, such as P3HT:PCBM, where non-dispersive recombination was proven to dominate the charge carrier dynamics under application relevant conditions.
Fluorination of organic spacer impacts on the structural and optical response of 2D perovskites
(2020)
Low-dimensional hybrid perovskites have triggered significant research interest due to their intrinsically tunable optoelectronic properties and technologically relevant material stability. In particular, the role of the organic spacer on the inherent structural and optical features in two-dimensional (2D) perovskites is paramount for material optimization. To obtain a deeper understanding of the relationship between spacers and the corresponding 2D perovskite film properties, we explore the influence of the partial substitution of hydrogen atoms by fluorine in an alkylammonium organic cation, resulting in (Lc)(2)PbI4 and (Lf)(2)PbI4 2D perovskites, respectively. Consequently, optical analysis reveals a clear 0.2 eV blue-shift in the excitonic position at room temperature. This result can be mainly attributed to a band gap opening, with negligible effects on the exciton binding energy. According to Density Functional Theory (DFT) calculations, the band gap increases due to a larger distortion of the structure that decreases the atomic overlap of the wavefunctions and correspondingly bandwidth of the valence and conduction bands. In addition, fluorination impacts the structural rigidity of the 2D perovskite, resulting in a stable structure at room temperature and the absence of phase transitions at a low temperature, in contrast to the widely reported polymorphism in some non-fluorinated materials that exhibit such a phase transition. This indicates that a small perturbation in the material structure can strongly influence the overall structural stability and related phase transition of 2D perovskites, making them more robust to any phase change. This work provides key information on how the fluorine content in organic spacer influence the structural distortion of 2D perovskites and their optical properties which possess remarkable importance for future optoelectronic applications, for instance in the field of light-emitting devices or sensors.