• search hit 4 of 4
Back to Result List

Nanomechanik und Adhäsion von Polyelektrolytmultischicht-Hohlkapseln

Nanomechanics and adhesion of polyelectrolyte multilayer hollow capsules

  • Die vorliegende Arbeit beschäftigte sich mit zwei Themengebieten. Es ging zum einen um die mechanischen Eigenschaften von Polyelektrolythohlkapseln und zum anderen um die Adhäsion von Polyelektrolythohlkapseln. Die mechanischen Eigenschaften wurden mit der AFM „colloidal probe” Technik untersucht. Dabei zeigte sich, dass die Kraftdeformationskurven für kleine Deformationen den nach der Schalentheorie vorhergesagten linearen Verlauf haben. Ebenso wurde die quadratische Abhängigkeit der Federkonstanten von der Dicke bestätigt. Für PAH/PSS findet man einen E-Modul von 0.25 GPa. Zusammen mit der Tatsache, dass die Deformationskurven unabhängig von der Geschwindigkeit sind und praktisch keine Hysterese zeigen, sowie der Möglichkeit die Kapseln plastisch zu deformieren, kann man schließen, dass das System in einem glasartigen Zustand vorliegt. <pt>Erwartungsgemäß zeigte der pH einen starken Einfluss auf die PEM. Während in einem pH-Bereich zwischen 2 und 11.5 keine morphologischen Änderungen festgestellt werden konnten, vergrößerte sich derDie vorliegende Arbeit beschäftigte sich mit zwei Themengebieten. Es ging zum einen um die mechanischen Eigenschaften von Polyelektrolythohlkapseln und zum anderen um die Adhäsion von Polyelektrolythohlkapseln. Die mechanischen Eigenschaften wurden mit der AFM „colloidal probe” Technik untersucht. Dabei zeigte sich, dass die Kraftdeformationskurven für kleine Deformationen den nach der Schalentheorie vorhergesagten linearen Verlauf haben. Ebenso wurde die quadratische Abhängigkeit der Federkonstanten von der Dicke bestätigt. Für PAH/PSS findet man einen E-Modul von 0.25 GPa. Zusammen mit der Tatsache, dass die Deformationskurven unabhängig von der Geschwindigkeit sind und praktisch keine Hysterese zeigen, sowie der Möglichkeit die Kapseln plastisch zu deformieren, kann man schließen, dass das System in einem glasartigen Zustand vorliegt. <pt>Erwartungsgemäß zeigte der pH einen starken Einfluss auf die PEM. Während in einem pH-Bereich zwischen 2 und 11.5 keine morphologischen Änderungen festgestellt werden konnten, vergrößerte sich der Radius bei pH = 12 um bis zu 50 %. Diese Radienänderung war reversibel und ging einher mit einem sichtbaren Weicherwerden der Kapseln. Eine Abnahme des E-Moduls um mindestens drei Größenordungen wurde durch Kraftdeformationsmessungen bestätigt. Die Kraftdeformationskurven zeigen eine starke Hysterese. Das System befindet sich nun nicht mehr in einem glasartigen Zustand, sondern ist viskos bis gummiartig geworden. Messungen an Kapseln, die mit Glutardialdehyd behandelt wurden, zeigten, dass die Behandlung das pH-abhängige Verhalten verändert. Dies kann darauf zurückgeführt werden, dass das PAH durch den Glutardialdehyd quervernetzt wird. Bei einem hohen Quervernetzungsgrad, zeigen die Kapseln keine Änderung des mechanischen Verhaltens bei pH = 12. Schwach quervernetzte Kapseln werden immer noch signifikant weicher bei pH = 12, jedoch ändert sich der Radius nicht. Außerdem wurden Multilagenkapseln untersucht, deren Stabilität nicht auf elektrostatischen Wechselwirkungen sondern auf Wasserstoffbrückenbindungen beruhte. Diese Kapseln zeigten eine deutlich höhere Steifigkeit mit E-Modulen bis zu 1 GPa. Es wurde gefunden, dass auch dieses System für kleine Deformationen ein lineares Kraft-Deformationsverhalten zeigt, und dass die Federkonstante quadratisch von der Dicke abhängt. Die Kapseln lösen sich praktisch sofort bei pH = 6.5 auf. In der Nähe dieses pHs konnte das Abnehmen der Federkonstanten verfolgt werden. Außerdem wurde das Adhäsionsverhalten von PAH/PSS Kapseln auf mit PEI-beschichtetem Glas untersucht. Die Adhäsionsflächen waren zu einem großen Teil rund und ließen sich quantitativ auswerten. Der Adhäsionsradius nimmt mit dem Kapselradius zu und mit der Dicke ab. Das Verhalten konnte mit zwei Modellen, einem für die große und einem für die kleine Deformation beschrieben werden. Das große Deformationsmodell liefert um eine Größenordung niedrigere Adhäsionsenergien als das kleine Deformationsmodell, welches mit Werten von ‑0.2 mJ/m<sup>2 Werte in einem plausiblen Bereich liefert. Es wurde gefunden, dass bei einem Verhältnis von Dicke zu Deformation von etwa eins "buckling" auftritt. Dieser Punkt markierte zugleich den Übergang von der großen zur kleinen Deformation.show moreshow less
  • This work had two objectives. The first was to study the mechanical properties of polyelectrolyte hollow capsules depending on the pH and the wall composition utilizing the AFM colloidal probe technique. The second objective was to study the adhesion of these capsules varying the radius and thickness. It was found that the AFM colloidal probe technique can be utilized to measure the shells spring constant. The acquired deformation curves for small deformations showed the linear force deformation relation predicted by the shell theory. The stiffness of capsules composed of polyallylamine and polystyrenesulfonate scales quadratically with the thickness giving Young’s modulus of 0.25 GPa. Changing the pH had no effect concerning the morphology and the elastic properties of the afore mentioned capsules up to pH = 11.5. At pH = 12 the capsules’ radius increased between 30 % and 50 % and the elastic modulus decreased by more than one order of magnitude. This pH-change can be viewed as the glass transition of the material, being in a glassyThis work had two objectives. The first was to study the mechanical properties of polyelectrolyte hollow capsules depending on the pH and the wall composition utilizing the AFM colloidal probe technique. The second objective was to study the adhesion of these capsules varying the radius and thickness. It was found that the AFM colloidal probe technique can be utilized to measure the shells spring constant. The acquired deformation curves for small deformations showed the linear force deformation relation predicted by the shell theory. The stiffness of capsules composed of polyallylamine and polystyrenesulfonate scales quadratically with the thickness giving Young’s modulus of 0.25 GPa. Changing the pH had no effect concerning the morphology and the elastic properties of the afore mentioned capsules up to pH = 11.5. At pH = 12 the capsules’ radius increased between 30 % and 50 % and the elastic modulus decreased by more than one order of magnitude. This pH-change can be viewed as the glass transition of the material, being in a glassy state below pH = 11.5 and becoming rubbery at pH = 12. Introducing crosslinking into the capsule wall inhibited any morphological changes at pH = 12, while leaving the capsule stiffness sensitive for small degrees of crosslinking. It was possible to prove the quadratic thickness dependency of the stiffness for a system where the internal forces keeping together the multilayer were hydrogen bonds (poly(methacrylic acid) / poly-4-vinylpyrrolidone). These apsules are significantly stiffer than the afore mentioned ones (Young’s modulus 0.6 to 1 GPa) and show a strong reaction towards increasing the pH by dissolving within seconds. Close to the dissolution pH these capsules also exhibit a transition from a glassy to a rubbery state. Capsules composed of polyallylamine / polystyrene sulfonate adhered to polyethylene imine coated glass. The radius of the adhesion disc increased with the radius of the capsule and decreased with increasing thickness. This behaviour could be semi quantitatively described with a strong and a weak deformation model giving a value for the adhesion energy of ‑0.02 mJ/m<sup>2 for the small deformation model. At deformations of the order of the thickness, the theoretically predicted buckling was observed.show moreshow less

Download full text files

Export metadata

Additional Services

Search Google Scholar Statistics
Metadaten
Author details:Nils Elsner
URN:urn:nbn:de:kobv:517-opus-5555
Supervisor(s):Helmuth Möhwald
Publication type:Doctoral Thesis
Language:German
Publication year:2005
Publishing institution:Universität Potsdam
Granting institution:Universität Potsdam
Date of final exam:2005/07/14
Release date:2005/08/09
Tag:adhesion; atomic force microscopy; mechanical properties; microscopy; polyelectrolyte multilayer
GND Keyword:Polyelektrolyt; Mehrschichtsystem; Mikroskopie; Kraftmikroskopie; Mechanische Eigenschaft; Adhäsion; Wasserstoffionenkonzentration
RVK - Regensburg classification:UV 1080
RVK - Regensburg classification:UV 4100
RVK - Regensburg classification:UF 3000
RVK - Regensburg classification:VE 8007
RVK - Regensburg classification:UV 7100
RVK - Regensburg classification:UV 9350
Organizational units:Mathematisch-Naturwissenschaftliche Fakultät / Institut für Physik und Astronomie
DDC classification:5 Naturwissenschaften und Mathematik / 53 Physik / 530 Physik
Accept ✔
This website uses technically necessary session cookies. By continuing to use the website, you agree to this. You can find our privacy policy here.