TY - JOUR A1 - López de Guereñu Kurganova, Anna A1 - Klier, Dennis Tobias A1 - Haubitz, Toni A1 - Kumke, Michael Uwe T1 - Influence of Gd3+ doping concentration on the properties of Na(Y,Gd)F-4 BT - Yb3+, Tm3+ upconverting nanoparticles and their long-term aging behavior JF - Photochemical & photobiological sciences / European Society for Photobiology N2 - We present a systematic study on the properties of Na(Y,Gd)F-4-based upconverting nanoparticles (UCNP) doped with 18% Yb3+, 2% Tm3+, and the influence of Gd3+ (10-50 mol% Gd3+). UCNP were synthesized via the solvothermal method and had a range of diameters within 13 and 50 nm. Structural and photophysical changes were monitored for the UCNP samples after a 24-month incubation period in dry phase and further redispersion. Structural characterization was performed by means of X-ray diffraction (XRD), transmission electron microscopy (TEM) as well as dynamic light scattering (DLS), and the upconversion luminescence (UCL) studies were executed at various temperatures (from 4 to 295 K) using time-resolved and steady-state spectroscopy. An increase in the hexagonal lattice phase with the increase of Gd3+ content was found, although the cubic phase was prevalent in most samples. The Tm3+-luminescence intensity as well as the Tm3+-luminescence decay times peaked at the Gd3+ concentration of 30 mol%. Although the general upconverting luminescence properties of the nanoparticles were preserved, the 24-month incubation period lead to irreversible agglomeration of the UCNP and changes in luminescence band ratios and lifetimes. KW - Upconversion luminescence KW - Lanthanides KW - Near infra-red KW - Ultra-low KW - temperature KW - Time-resolved spectroscopy Y1 - 2022 U6 - https://doi.org/10.1007/s43630-021-00161-4 SN - 1474-905X SN - 1474-9092 VL - 21 IS - 2 SP - 235 EP - 245 PB - Springer CY - Heidelberg ER - TY - JOUR A1 - Liu, Yue A1 - Gould, Oliver E. C. A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - On demand sequential release of (sub)micron particles controlled by size and temperature JF - Small : nano micro N2 - Polymeric devices capable of releasing submicron particles (subMP) on demand are highly desirable for controlled release systems, sensors, and smart surfaces. Here, a temperature-memory polymer sheet with a programmable smooth surface served as matrix to embed and release polystyrene subMP controlled by particle size and temperature. subMPs embedding at 80 degrees C can be released sequentially according to their size (diameter D of 200 nm, 500 nm, 1 mu m) when heated. The differences in their embedding extent are determined by the various subMPs sizes and result in their distinct release temperatures. Microparticles of the same size (D approximate to 1 mu m) incorporated in films at different programming temperatures T-p (50, 65, and 80 degrees C) lead to a sequential release based on the temperature-memory effect. The change of apparent height over the film surface is quantified using atomic force microscopy and the realization of sequential release is proven by confocal laser scanning microscopy. The demonstration and quantification of on demand subMP release are of technological impact for assembly, particle sorting, and release technologies in microtechnology, catalysis, and controlled release. KW - on demand particle release KW - temperature-memory effect KW - thermosensitive KW - polymer surface Y1 - 2022 U6 - https://doi.org/10.1002/smll.202104621 SN - 1613-6810 SN - 1613-6829 VL - 18 IS - 5 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Kuntze, Kim A1 - Viljakka, Jani A1 - Titov, Evgenii A1 - Ahmed, Zafar A1 - Kalenius, Elina A1 - Saalfrank, Peter A1 - Priimagi, Arri T1 - Towards low-energy-light-driven bistable photoswitches BT - ortho-fluoroaminoazobenzenes JF - Photochemical & photobiological sciences / European Society for Photobiology N2 - Thermally stable photoswitches that are driven with low-energy light are rare, yet crucial for extending the applicability of photoresponsive molecules and materials towards, e.g., living systems. Combined ortho-fluorination and -amination couples high visible light absorptivity of o-aminoazobenzenes with the extraordinary bistability of o-fluoroazobenzenes. Herein, we report a library of easily accessible o-aminofluoroazobenzenes and establish structure-property relationships regarding spectral qualities, visible light isomerization efficiency and thermal stability of the cis-isomer with respect to the degree of o-substitution and choice of amino substituent. We rationalize the experimental results with quantum chemical calculations, revealing the nature of low-lying excited states and providing insight into thermal isomerization. The synthesized azobenzenes absorb at up to 600 nm and their thermal cis-lifetimes range from milliseconds to months. The most unique example can be driven from trans to cis with any wavelength from UV up to 595 nm, while still exhibiting a thermal cis-lifetime of 81 days.
[GRAPHICS]
. Y1 - 2022 U6 - https://doi.org/10.1007/s43630-021-00145-4 SN - 1474-905X SN - 1474-9092 VL - 21 IS - 2 SP - 159 EP - 173 PB - Springer CY - Heidelberg ER - TY - THES A1 - Nie, Yan T1 - Modulating keratinocyte and induced pluripotent stem cell behavior by microenvironment design or temperature control N2 - Under the in vivo condition, a cell is continually interacting with its surrounding microenvironment, which is composed of its neighboring cells and the extracellular matrix (ECM). These components generate and transmit the microenvironmental signals to regulate the fate and function of the target cells. Except the signals from the microenvironment, stimuli from the ambient environment, such as temperature changes, also play an important in modulating the cell behaviors, which are considered as regulators from the macroenvironment. In this regard, recapitulation of these environmental factors to steer cell function will be of crucial importance for therapeutic purposes and tissue regeneration. Although the role of a variety of environmental factors has been evaluated, it is still challenging to identify and provide the appropriate factors, which are required for optimizing the survival of cells and for ensuring effective cell functions. Thus, in vitro recreating the environmental factors that are present in the extracellular environment would help to understand the mechanism of how cells sense and process those environmental signals. In this context, this thesis is aimed to harness these environmental parameters to guide cell responses. Here, human induced pluripotent stem cells (hiPSCs) and human keratinocytes (KTCs), HaCaT cells, were used to investigate the impact of signals from the microenvironment or stimuli from the macroenvironment. Firstly, polydopamine (PDA) or chitosan (CS) modifications were applied to generate different substrate surfaces for hiPSCs and KTCs (Chapter 4 to Chapter 6). Our results showed that the PDA modification was efficient to increase the cell-substrate adhesion and consequently promoted cell spreading. While CS modification was able to decrease the cell-substrate adhesion and enhance the cell-cell interaction, which enabled the morphology shift from monolayered cells to multicellular spheroids. The quantitative result was acquired using the atomic force microscopy (AFM)-based single-cell force spectroscopy. The balance between the cell-substrate and cell-cell adhesion yielded a net force, which determined the preference of the cell to adhere to its neighboring cells or to the substrate. The difference in the adhesive behaviors further affected the cellular function, such as the proliferation and differentiation potential of both hiPSCs and HaCaT cells. Next, the cyclic temperature changes (ΔT) were selected here to study the influence of macroenvironmental stimuli on hiPSCs and KTCs (Chapter 7 and Chapter 8). The macroenvironmental temperature ranging from 10.0 ± 0.1 °C to 37.0 ± 0.1 °C was achieved using a thermal chamber equipped with a temperature controller. This temperature range was selected to explore the responses of hiPSCs to the extreme environments, while a temperature variation between 25.0 ± 0.1 °C and 37.0 ± 0.1 °C was applied to mimic the ambient temperature variations experienced by the skin epithelial KTCs. The ΔT led to cell stiffening in both hiPSCs and HaCaT cells in a cytoskeleton-dependent manner, which was measured by AFM. Specifically, in hiPSCs, the cell stiffening was resulted from the rearrangement of the actin skeleton; in HaCaT cells, was due to the difference of the Keratin (KRT) filaments. Except for inducing cell hardening, ΔT also caused differences in the protein expression profiles in hiPSCs or HaCaT cells, compared to those without ΔT treatment, which might be attributed to the alterations in their cytoskeleton structures. To sum up, the results of the thesis demonstrated how individual factors from the micro-/macro-environment can be harnessed to modulate the behaviors of hiPSCs and HaCaT cells. Engineering the microenvironmental cues using surface modification and exploiting the macroenvironmental stimuli through temperature control were identified as precise and potent approaches to steer hiPSC and HaCaT cell behaviors. The application of AFM served as a non-invasive and real-time monitoring platform to trace the change in cell topography and mechanics induced by the environmental signals, which provide novel insights into the cell-environment interactions. N2 - In vivo interagiert eine Zelle ständig mit ihrer Mikroumgebung, die aus ihren Nachbarzellen und der extrazellulären Matrix (ECM) besteht. Diese Komponenten erzeugen und übertragen die Mikroumgebungssignale, um das Schicksal und die Funktion der Zielzellen zu regulieren. Außer den Signalen aus der Mikroumgebung spielen auch Reize aus der Makroumgebung, wie Temperaturänderungen, eine wichtige Rolle bei der Modulation des Zellverhaltens. In dieser Hinsicht ist es wichtig, diese Umweltfaktoren zur Steuerung der Zellfunktion für therapeutische Zwecke und die Geweberegeneration zu rekapitulieren. Es stellt sich immer noch eine Herausforderung, geeignete Faktoren zu identifizieren und bereitzustellen, die zur Optimierung des Überlebens von Zellen und zur Sicherstellung effektiver Zellfunktionen erforderlich sind. Daher würde die in vitro-Nachbildung der Umweltfaktoren helfen, den Mechanismus zu verstehen, wie Zellen diese Umweltsignale wahrnehmen und verarbeiten. In diesem Zusammenhang zielt diese Dissertation darauf ab, diese externen Parameter zu nutzen, um Zellantworten zu steuern. Hier wurden humaninduzierte pluripotente Stammzellen (hiPSCs) und humane Keratinozyten (KTCs) wie HaCaT-Zellen verwendet, um den Einfluss von Signalen aus der Mikroumgebung oder Stimuli aus der Makroumgebung zu untersuchen. Zunächst wurden Modifikationen mit Polydopamin (PDA) oder Chitosan (CS) angewendet, um unterschiedliche Substratoberflächen für hiPSCs und KTCs zu erzeugen (Kapitel 4 bis Kapitel 6). Unsere Ergebnisse zeigten, dass die PDA-Modifikation die Zell-Substrat-Adhäsion erhöhte und folglich die Zellausbreitung förderte. Während die CS-Modifikation die Zell-Substrat-Adhäsion verringerte und die Zell-Zell-Interaktion verstärkte, verändeite sich die Morphologie von einschichtigen Zellen zu mehrzelligen Sphäroiden. Das quantitative Ergebnis wurde mittels Rasterkraftmikroskopie (AFM)-basierter Einzelzellkraftspektroskopie gewonnen. Das Gleichgewicht zwischen Zell-Substrat und Zell-Zell-Adhäsion ergab eine Nettokraft, die die Präferenz der Zelle bestimmt, an ihren Nachbarzellen oder am Substrat zu haften. Der Unterschied im Adhäsionsverhalten beeinflusste außerdem die Zellfunktion, wie das Proliferations- und Differenzierungspotential von hiPSCs und HaCaT-Zellen. Als nächstes wurden hier zyklische Temperaturänderungen (ΔT) ausgewählt, um den Einfluss von Stimuli aus der Makroumgebung auf hiPSCs und KTCs zu untersuchen (Kapitel 7 und Kapitel 8). Die Makroumgebungstemperatur im Bereich von 10,0 ± 0,1 °C bis 37,0 ± 0,1 °C wurde unter Verwendung einer mit einem Temperaturregler ausgestatteten Wärmekammer erreicht. Dieser Temperaturbereich wurde gewählt, um die Reaktion von hiPSCs auf extreme Umgebungen zu untersuchen, während eine Temperaturvariation zwischen 25,0 ± 0,1 ° C und 37,0 ± 0,1 ° C angewendet wurde, um die Temperaturänderungen nachzuahmen, die die Epithelzellen erfahren. Das ΔT führte zytoskelettabhängig zu einer Zellversteifung sowohl in hiPSCs als auch in HaCaT-Zellen, die mittels AFM gemessen wurde. Insbesondere bei hiPSCs resultierte die Zellversteifung aus der Neuordnung des Aktinskeletts; in HaCaT-Zellen, war auf den Unterschied der Keratin (KRT)-Filamente zurückzuführen. Abgesehen von der festgestellten Erhärtung der Zellen verursachte ΔT auch Unterschiede in den Proteinexpressionsprofilen in hiPSCs oder HaCaT-Zellen im Vergleich zu denen ohne ΔT-Behandlung. Dies könnte auf die Veränderungen in ihren Zytoskelettstrukturen zurückgeführt werden. Zusammenfassend zeigten die Ergebnisse, wie die drei Faktoren (PDA/CS-Modifikation und ΔT) aus der Mikro-/Makroumgebung genutzt werden können, um das Verhalten von hiPSCs und HaCaT-Zellen zu modulieren. Als präzise und wirksame Ansätze zur Steuerung des hiPSC- und HaCaT-Zellen-Verhaltens wurde das Engineering der Mikroumgebungssignale durch Oberflächenmodifikation und die Nutzung der Makroumgebungsreize durch Temperaturkontrolle identifiziert. Die Anwendung von AFM diente als nicht-invasive und Echtzeit-Überwachungsplattform, um die durch die Umweltsignale induzierten Veränderungen der Zelltopographie und -mechanik zu verfolgen, die neue Einblicke in die Zell-Umwelt-Interaktionen liefern. KW - human induced pluripotent stem cells KW - human keratinocytes KW - cell-environment interactions KW - surface modification KW - temperature variations KW - humaninduzierte pluripotente Stammzellen KW - humane Keratinozyten KW - Zell-Umwelt-Interaktionen KW - Oberflächenmodifikation KW - Temperaturänderungen Y1 - 2022 ER - TY - JOUR A1 - Tung, Wing Tai A1 - Maring, Janita A. A1 - Xu, Xun A1 - Liu, Yue A1 - Becker, Matthias A1 - Somesh, Dipthi Bachamanda A1 - Klose, Kristin A1 - Wang, Weiwei A1 - Sun, Xianlei A1 - Ullah, Imran A1 - Kratz, Karl A1 - Neffe, Axel T. A1 - Stamm, Christof A1 - Ma, Nan A1 - Lendlein, Andreas T1 - In vivo performance of a cell and factor free multifunctional fiber mesh modulating postinfarct myocardial remodeling JF - Advanced Functional Materials N2 - Guidance of postinfarct myocardial remodeling processes by an epicardial patch system may alleviate the consequences of ischemic heart disease. As macrophages are highly relevant in balancing immune response and regenerative processes their suitable instruction would ensure therapeutic success. A polymeric mesh capable of attracting and instructing monocytes by purely physical cues and accelerating implant degradation at the cell/implant interface is designed. In a murine model for myocardial infarction the meshes are compared to those either coated with extracellular matrix or loaded with induced cardiomyocyte progenitor cells. All implants promote macrophage infiltration and polarization in the epicardium, which is verified by in vitro experiments. 6 weeks post-MI, especially the implantation of the mesh attenuates left ventricular adverse remodeling processes as shown by reduced infarct size (14.7% vs 28-32%) and increased wall thickness (854 mu m vs 400-600 mu m), enhanced angiogenesis/arteriogenesis (more than 50% increase compared to controls and other groups), and improved heart function (ejection fraction = 36.8% compared to 12.7-31.3%). Upscaling as well as process controls is comprehensively considered in the presented mesh fabrication scheme to warrant further progression from bench to bedside. KW - bioinstructive materials KW - cardiac regeneration KW - function by structure; KW - modulation of in vivo regeneration KW - multifunctional biomaterials Y1 - 2022 U6 - https://doi.org/10.1002/adfm.202110179 SN - 1616-301X SN - 1616-3028 VL - 32 IS - 31 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Sandmann, Michael A1 - Münzberg, Marvin A1 - Bressel, Lena A1 - Reich, Oliver A1 - Hass, Roland T1 - Inline monitoring of high cell density cultivation of Scenedesmus rubescens in a mesh ultra-thin layer photobioreactor by photon density wave spectroscopy JF - BMC Research Notes / Biomed Central N2 - Objective Due to multiple light scattering that occurs inside and between cells, quantitative optical spectroscopy in turbid biological suspensions is still a major challenge. This includes also optical inline determination of biomass in bioprocessing. Photon Density Wave (PDW) spectroscopy, a technique based on multiple light scattering, enables the independent and absolute determination of optical key parameters of concentrated cell suspensions, which allow to determine biomass during cultivation. Results A unique reactor type, called "mesh ultra-thin layer photobioreactor" was used to create a highly concentrated algal suspension. PDW spectroscopy measurements were carried out continuously in the reactor without any need of sampling or sample preparation, over 3 weeks, and with 10-min time resolution. Conventional dry matter content and coulter counter measurements have been employed as established offline reference analysis. The PBR allowed peak cell dry weight (CDW) of 33.4 g L-1. It is shown that the reduced scattering coefficient determined by PDW spectroscopy is strongly correlated with the biomass concentration in suspension and is thus suitable for process understanding. The reactor in combination with the fiber-optical measurement approach will lead to a better process management. KW - Photon density wave spectroscopy KW - Multiple light scattering KW - Process KW - analytical technology KW - Fiber-optical spectroscopy KW - Mesh ultra-thin layer KW - photobioreactor Y1 - 2022 U6 - https://doi.org/10.1186/s13104-022-05943-2 SN - 1756-0500 VL - 15 IS - 1 PB - Biomed Central (London) CY - London ER - TY - JOUR A1 - Fudickar, Werner A1 - Metz, Melanie A1 - Mai-Linde, Yasemin A1 - Krüger, Tobias A1 - Kelling, Alexandra A1 - Sperlich, Eric A1 - Linker, Torsten T1 - Influence of functional groups on the ene reaction of singlet oxygen with 1,4-cyclohexadienes JF - Photochemistry and photobiology : the official journal of the American Society for Photobiology N2 - The photooxygenation of 1,4-cyclohexadienes has been studied with a special focus on regio- and stereoselectivities. In all examples, only the methyl-substituted double bond undergoes an ene reaction with singlet oxygen, to afford hydroperoxides in moderate to good yields. We explain the high regioselectivities by a "large-group effect" of the adjacent quaternary stereocenter. Nitriles decrease the reactivity of singlet oxygen, presumably by quenching, but can stabilize proposed per-epoxide intermediates by polar interactions resulting in different stereoselectivities. Spiro lactams and lactones show an interesting effect on regio- and stereoselectivities of the ene reactions. Thus, singlet oxygen attacks the double bond preferentially anti to the carbonyl group, affording only one regioisomeric hydroperoxide. If the reaction occurs from the opposite face, the other regioisomer is exclusively formed by severe electrostatic repulsion in a perepoxide intermediate. We explain this unusual behavior by the fixed geometry of spiro compounds and call it a "spiro effect" in singlet oxygen ene reactions. Y1 - 2021 U6 - https://doi.org/10.1111/php.13422 SN - 0031-8655 SN - 1751-1097 VL - 97 IS - 6 SP - 1289 EP - 1297 PB - Wiley CY - Malden, Mass. ER - TY - JOUR A1 - Raju, Rajarshi Roy A1 - Koetz, Joachim T1 - Inner rotation of Pickering Janus emulsions JF - Nanomaterials : open access journal N2 - Janus droplets were prepared by vortex mixing of three non-mixable liquids, i.e., olive oil, silicone oil and water, in the presence of gold nanoparticles (AuNPs) in the aqueous phase and magnetite nanoparticles (MNPs) in the olive oil. The resulting Pickering emulsions were stabilized by a red-colored AuNP layer at the olive oil/water interface and MNPs at the oil/oil interface. The core–shell droplets can be stimulated by an external magnetic field. Surprisingly, an inner rotation of the silicon droplet is observed when MNPs are fixed at the inner silicon droplet interface. This is the first example of a controlled movement of the inner parts of complex double emulsions by magnetic manipulation via interfacially confined magnetic nanoparticles. KW - Janus droplets KW - Pickering emulsions KW - magnetic manipulation KW - gold nanoparticles KW - magnetite nanoparticles Y1 - 2021 U6 - https://doi.org/10.3390/nano11123312 SN - 2079-4991 VL - 11 IS - 12 PB - MDPI CY - Basel ER - TY - JOUR A1 - Picconi, David T1 - Nonadiabatic quantum dynamics of the coherent excited state intramolecular proton transfer of 10-hydroxybenzo[h]quinoline JF - Photochemical & photobiological sciences N2 - The photoinduced nonadiabatic dynamics of the enol-keto isomerization of 10-hydroxybenzo[h]quinoline (HBQ) are studied computationally using high-dimensional quantum dynamics. The simulations are based on a diabatic vibronic coupling Hamiltonian, which includes the two lowest pi pi* excited states and a n pi* state, which has high energy in the Franck-Condon zone, but significantly stabilizes upon excited state intramolecular proton transfer. A procedure, applicable to large classes of excited state proton transfer reactions, is presented to parametrize this model using potential energies, forces and force constants, which, in this case, are obtained by time-dependent density functional theory. The wave packet calculations predict a time scale of 10-15 fs for the photoreaction, and reproduce the time constants and the coherent oscillations observed in time- resolved spectroscopic studies performed on HBQ. In contrast to the interpretation given to the most recent experiments, it is found that the reaction initiated by 1 pi pi* <- S-0 photoexcitation proceeds essentially on a single potential energy surface, and the observed coherences bear signatures of Duschinsky mode-mixing along the reaction path. The dynamics after the 2 pi pi* <- S-0 excitation are instead nonadiabatic, and the n pi* state plays a major role in the relaxation process. The simulations suggest a mainly active role of the proton in the isomerization, rather than a passive migration assisted by the vibrations of the benzoquinoline backbone.
[GRAPHICS]
. KW - Excited state proton transfer KW - Quantum dynamics KW - Nonadiabatic effects KW - Spectroscopy KW - Coherences Y1 - 2021 U6 - https://doi.org/10.1007/s43630-021-00112-z SN - 1474-905X SN - 1474-9092 VL - 20 IS - 11 SP - 1455 EP - 1473 PB - Springer CY - Heidelberg ER - TY - THES A1 - Nacak, Selma T1 - Synthesis and Characterization of Upconversion Nanaparticles for Applications in Life Sciences Y1 - 2021 ER -