TY - THES A1 - Prokhorov, Boris E. T1 - High-latitude coupling processes between thermospheric circulation and solar wind driven magnetospheric currents and plasma convection T1 - Kopplungsprozesse zwischen der thermosphärischen Zirkulation in hohen Breiten und den vom Sonnenwind getriebenen magnetosphärischen Strömen und der Plasmakonvektion N2 - The high-latitudinal thermospheric processes driven by the solar wind and Interplanetary Magnetic Field (IMF) interaction with the Earth magnetosphere are highly variable parts of the complex dynamic plasma environment, which represent the coupled Magnetosphere – Ionosphere – Thermosphere (MIT) system. The solar wind and IMF interactions transfer energy to the MIT system via reconnection processes at the magnetopause. The Field Aligned Currents (FACs) constitute the energetic links between the magnetosphere and the Earth ionosphere. The MIT system depends on the highly variable solar wind conditions, in particular on changes of the strength and orientation of the IMF. In my thesis, I perform an investigation on the physical background of the complex MIT system using the global physical - numerical, three-dimensional, time-dependent and self-consistent Upper Atmosphere Model (UAM). This model describes the thermosphere, ionosphere, plasmasphere and inner magnetosphere as well as the electrodynamics of the coupled MIT system for the altitudinal range from 80 (60) km up to the 15 Earth radii. In the present study, I developed and investigated several variants of the high-latitudinal electrodynamic coupling by including the IMF dependence of FACs into the UAM model. For testing, the various variants were applied to simulations of the coupled MIT system for different seasons, geomagnetic activities, various solar wind and IMF conditions. Additionally, these variants of the theoretical model with the IMF dependence were compared with global empirical models. The modelling results for the most important thermospheric parameters like neutral wind and mass density were compared with satellite measurements. The variants of the UAM model with IMF dependence show a good agreement with the satellite observations. In comparison with the empirical models, the improved variants of the UAM model reproduce a more realistic meso-scale structures and dynamics of the coupled MIT system than the empirical models, in particular at high latitudes. The new configurations of the UAM model with IMF dependence contribute to the improvement of space weather prediction. N2 - Die thermosphärischen Prozesse in hohen Breiten, die durch die Wechselwirkung des Sonnenwinds und des Interplanetaren Magnetfeldes (IMF) mit der Erdmagnetosphäre getrieben werden, stellen sich als stark veränderliches Geschehen in der komplexen dynamischen Plasmaumgebung der Erde dar, die das gekoppelte System der Magnetosphäre, Ionosphäre und Thermosphäre (MIT) umfaßt. Die Einflüsse des Sonnenwindes und des IMF zeigen sich als Energieübertragung in das MIT System mittels Rekonnektionsprozessen an der Magnetopause. Feldliniengerichtete Ströme (FACs) repräsentieren die energetische Kopplung zwischen der Magnetosphäre und der Ionosphäre der Erde. Das MIT System wird bestimmt durch die stark veränderlichen Sonnenwindbedingungen, insbesondere von der Stärke und Richtung des IMF. In meiner Promotionsschrift untersuche ich die physikalischen Bedingungen des komplexen MIT System mit Hilfe eines globalen physikalisch-numerischen, dreidimensionalen, zeitabhängigen und selbstkonsistenten Modells, dem Upper Atmosphere Model (UAM). Das UAM beschreibt das Verhalten der Thermosphäre, Ionosphäre, Plasmasphäre und der inneren Magnetosphäre in einem Höhenbereich zwischen 80 (60) km und 15 Erdradien sowie die elektrodynamische Verkopplung des gesamten MIT Systems. In der vorliegenden Arbeit habe ich mehrere Varianten der elektrodynamischen Kopplung in hohen Breiten entwickelt und analysiert, die die FACs innerhalb des UAM in ihrer Abhängigkeit vom IMF darstellen. Für Testzwecke wurden diese Varianten auf eine Reihe von numerischen Simulationen des gekoppelten MIT Systems unter verschiedenen Bedingungen hinsichtlich Jahreszeit, geomagnetischer Aktivität, Sonnenwind- und IMF-Parametern angewandt. Darüberhinaus wurden diese Varianten des IMF-abhängigen theoretischen Modells entsprechenden globalen empirischen Modellen gegenübergestellt. Modellergebnisse wurden außerdem mit einigen wichtigen von Satelliten gemessenen Thermosphärenparametern, wie dem Neutralwind und der Massendichte verglichen. Die UAM Modelvarianten mit IMF-Abhängigkeit zeigen eine gute Übereinstimmung mit den Satellitenbeobachtungen. Im Vergleich mit empirischen Modellaussagen geben die UAM Modellvarianten ein genaueres Bild der mesoskaligen Strukturen und der Dynamik des gekoppelten MIT Systems wieder, insbesondere für die hohen Breiten. Die neuen UAM Konfigurationen mit IMF-Abhängigkeit tragen damit zu verbesserten Möglichkeiten in der Weltraumwettervorhersage bei. KW - upper atmosphere model KW - high-latitudinal thermosphere KW - magnetosphere-ionosphere-thermosphere coupling KW - solar wind and interplanetary magnetic field influence KW - field aligned currents KW - Upper Atmosphere Model (UAM) KW - Thermosphäre hoher Breiten KW - Kopplung zwischen Magnetosphäre, Ionosphäre und Thermosphäre KW - Einfluß des Sonnenwindes und des interplanetaren magnetischen Feldes KW - feldlinengerichtete Ströme Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-92353 ER - TY - THES A1 - Matuschek, Hannes T1 - Applications of reproducing Kernel Hilbert spaces and their approximations Y1 - 2015 ER - TY - JOUR A1 - Metzler, Ralf A1 - Bauer, Maximilian A1 - Rasmussen, Emil S. A1 - Lomholt, Michael A. T1 - Real sequence effects on the search dynamics of transcription factors on DNA JF - Scientific Reports N2 - Recent experiments show that transcription factors (TFs) indeed use the facilitated diffusion mechanism to locate their target sequences on DNA in living bacteria cells: TFs alternate between sliding motion along DNA and relocation events through the cytoplasm. From simulations and theoretical analysis we study the TF-sliding motion for a large section of the DNA-sequence of a common E. coli strain, based on the two-state TF-model with a fast-sliding search state and a recognition state enabling target detection. For the probability to detect the target before dissociating from DNA the TF-search times self-consistently depend heavily on whether or not an auxiliary operator (an accessible sequence similar to the main operator) is present in the genome section. Importantly, within our model the extent to which the interconversion rates between search and recognition states depend on the underlying nucleotide sequence is varied. A moderate dependence maximises the capability to distinguish between the main operator and similar sequences. Moreover, these auxiliary operators serve as starting points for DNA looping with the main operator, yielding a spectrum of target detection times spanning several orders of magnitude. Auxiliary operators are shown to act as funnels facilitating target detection by TFs. KW - gene regulatory networks KW - biological physics Y1 - 2015 U6 - https://doi.org/10.1038/srep10072 SN - 2045-2322 VL - 5 IS - 10072 PB - Nature Publishing Group CY - London ER - TY - THES A1 - Hainich, Rainer T1 - The Wolf-Rayet stars of the nitrogen sequence in environments of different metallicities Y1 - 2015 ER - TY - GEN A1 - Metzler, Ralf A1 - Bauer, Maximilian A1 - Rasmussen, Emil S. A1 - Lomholt, Michael A. T1 - Real sequence effects on the search dynamics of transcription factors on DNA N2 - Recent experiments show that transcription factors (TFs) indeed use the facilitated diffusion mechanism to locate their target sequences on DNA in living bacteria cells: TFs alternate between sliding motion along DNA and relocation events through the cytoplasm. From simulations and theoretical analysis we study the TF-sliding motion for a large section of the DNA-sequence of a common E. coli strain, based on the two-state TF-model with a fast-sliding search state and a recognition state enabling target detection. For the probability to detect the target before dissociating from DNA the TF-search times self-consistently depend heavily on whether or not an auxiliary operator (an accessible sequence similar to the main operator) is present in the genome section. Importantly, within our model the extent to which the interconversion rates between search and recognition states depend on the underlying nucleotide sequence is varied. A moderate dependence maximises the capability to distinguish between the main operator and similar sequences. Moreover, these auxiliary operators serve as starting points for DNA looping with the main operator, yielding a spectrum of target detection times spanning several orders of magnitude. Auxiliary operators are shown to act as funnels facilitating target detection by TFs. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 189 KW - gene regulatory networks KW - biological physics Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-79411 ER - TY - THES A1 - Bittermann, Klaus T1 - Semi-empirical sea-level modelling T1 - Semiempirische Meeresspiegelmodellierung N2 - Semi-empirical sea-level models (SEMs) exploit physically motivated empirical relationships between global sea level and certain drivers, in the following global mean temperature. This model class evolved as a supplement to process-based models (Rahmstorf (2007)) which were unable to fully represent all relevant processes. They thus failed to capture past sea-level change (Rahmstorf et al. (2012)) and were thought likely to underestimate future sea-level rise. Semi-empirical models were found to be a fast and useful tool for exploring the uncertainties in future sea-level rise, consistently giving significantly higher projections than process-based models. In the following different aspects of semi-empirical sea-level modelling have been studied. Models were first validated using various data sets of global sea level and temperature. SEMs were then used on the glacier contribution to sea level, and to infer past global temperature from sea-level data via inverse modelling. Periods studied encompass the instrumental period, covered by tide gauges (starting 1700 CE (Common Era) in Amsterdam) and satellites (first launched in 1992 CE), the era from 1000 BCE (before CE) to present, and the full length of the Holocene (using proxy data). Accordingly different data, model formulations and implementations have been used. It could be shown in Bittermann et al. (2013) that SEMs correctly predict 20th century sea-level when calibrated with data until 1900 CE. SEMs also turned out to give better predictions than the Intergovernmental Panel on Climate Change (IPCC) 4th assessment report (AR4, IPCC (2007)) models, for the period from 1961–2003 CE. With the first multi-proxy reconstruction of global sea-level as input, estimate of the human-induced component of modern sea-level change and projections of future sea-level rise were calculated (Kopp et al. (2016)). It turned out with 90% confidence that more than 40 % of the observed 20th century sea-level rise is indeed anthropogenic. With the new semi-empirical and IPCC (2013) 5th assessment report (AR5) projections the gap between SEM and process-based model projections closes, giving higher credibility to both. Combining all scenarios, from strong mitigation to business as usual, a global sea-level rise of 28–131 cm relative to 2000 CE, is projected with 90% confidence. The decision for a low carbon pathway could halve the expected global sea-level rise by 2100 CE. Present day temperature and thus sea level are driven by the globally acting greenhouse-gas forcing. Unlike that, the Milankovich forcing, acting on Holocene timescales, results mainly in a northern-hemisphere temperature change. Therefore a semi-empirical model can be driven with northernhemisphere temperatures, which makes it possible to model the main subcomponent of sea-level change over this period. It showed that an additional positive constant rate of the order of the estimated Antarctic sea-level contribution is then required to explain the sea-level evolution over the Holocene. Thus the global sea level, following the climatic optimum, can be interpreted as the sum of a temperature induced sea-level drop and a positive long-term contribution, likely an ongoing response to deglaciation coming from Antarctica. N2 - Semiempirische Meeresspiegelmodelle (SEMe) nutzen die physikalisch motivierte, empirische Beziehung des globalen Meeresspiegels zu einem bestimmten Antrieb. Im Folgenden ist das die mittlere globale Temperatur. Diese Modellklasse entstand als Ergänzung zu prozeßbasierten Modellen, die nicht alle relevanten Prozesse abbilden konnten (Rahmstorf (2007)) und die deshalb weder den beobachteten Meeresspiegel erklären konnten (Rahmstorf et al. (2012)) noch vertrauenswürdige Zukunftsprojektionen lieferten. Semiempirische Modelle sind eine gute und schnelle Option, die Unsicherheit im zukünftigen Meeresspiegelanstieg auszuloten, wobei sie konsistent höhere Zukunftsprojektionen lieferten als prozeßbasierte Modelle. Im Folgenden wurden verschiedene Aspekte der semiempirischen Meeresspiegelmodellierung untersucht. Modelle wurden erst mit verschiedenen globalen Temperatur- und Meeresspiegeldatensätzen validiert. SEMe wurden dann auf den Meeresspiegelbeitrag von Gletschern angewandt und genutzt, um die globale Temperatur aus Meeresspiegeldaten abzuleiten. Die untersuchten Zeiträume variieren zwischen dem instrumentellen Abschnitt mit Pegelstandsmessungen (seit dem Jahr 1700 in Amsterdam) und Satellitendaten (seit 1992), dem Zeitraum seit 1000 vor Christus und dem gesamten Holozän (mittels Proxydaten). Entsprechend wurden verschiedene Daten, Modellformulierungen und -implementationen benutzt. Es konnte in Bittermann et al. (2013) gezeigt werden, dass SEMe den beobachteten Meeresspiegel des 20sten Jahrhunderts korrekt vorhersagen können, wenn sie bis zum Jahr 1900 kalibriert wurden. Auch für den Zeitraum 1961 bis 2003 lieferten SEMe bessere Vorhersagen als der vierte Sachstandsbericht des Intergovernmental Panel on Climate Change (AR4, IPCC (2007)). Mit der ersten globalen multi-proxy Rekonstruktion des globalen Meeresspiegels als Input konnten sowohl der anthropogene Anteil des modernen Meeresspiegelanstiegs als auch Zukunftsprojektionen berechnet werden (Kopp et al. (2016)). Es zeigt sich mit 90% Sicherheit, dass mehr als 40 % des beobachteten Meeresspiegelanstiegs im 20sten Jahrhundert anthropogenen Ursprungs sind. Mit den neuen semiempirischen Zukunftsprojektionen und denen des fünften Sachstandsberichtes (AR5) des IPCC (2013) läßt sich die Kluft zwischen SEMen und prozeßbasierten Modellen schließen, was beide vertrauenswürdiger macht. Über alle Szenarien hinweg, von starker Treibhausgaseinsparung bis zum ungebremsten Ausstoß, ergibt sich, mit 90% Sicherheit, zwischen 2000 und 2100 ein Meeresspiegelanstieg von 28 bis 131 cm. Die Entscheidung starker Treibhausgaseinsparungen kann den erwarteten globalen Meeresspiegelanstieg im Jahr 2100 halbieren. Die gegenwärtige globale Temperatur, und damit der globale Meeresspiegel, werden von dem global wirkenden Treibhausgasforcing bestimmt. Im Gegensatz dazu wirkt das orbitale Forcing, welches über Holozän-Zeitskalen dominiert, hauptsächlich auf die Nordhemisphäre. Deshalb kann man ein SEM mit Nordhemisphärentemperaturen antreiben und dadurch die Hauptkomponente der Meeresspiegeländerung über das Holozän simulieren. Es stellte sich heraus, dass eine zusätzliche konstante Rate, von der Größenordnung des antarktischen Beitrags zum Meeresspiegel, nötig ist, um den Meeresspiegelverlauf des Holozäns zu erklären. Der Meeresspiegel seit dem Holozän-Klimaoptimum kann also als eine Summe von temperaturbedingtem Fallen und einem langfristigen positiven Beitrag, wahrscheinlich einer andauernden Reaktion auf die Deglaziation der Antarktis, interpretiert werden. KW - sea level KW - Meeresspiegel KW - climate change KW - Klimawandel KW - projections KW - Projektionen KW - anthropogenic sea level KW - anthropogener Meeresspiegel KW - Holocene KW - Holozän KW - semi-empirical models KW - semiempirische Modelle Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-93881 ER - TY - THES A1 - Anielski, Alexander T1 - Entwicklung einer mikrofluidischen, adaptiv geregelten Messapparatur zur quantitativen Untersuchung von Chemotaxis mit Hilfe der Flussfotolyse KW - Flussfotolyse KW - Konzentration KW - Chemotaxis KW - Mikrokanal KW - Dictyostelium KW - flow photolysis KW - concentration KW - chemotaxis KW - microchannel KW - Dictyostelium Y1 - 2015 ER - TY - THES A1 - Kondic, Todor T1 - Hall-MHD Instabilities of Shear Flows in Neutron Stars Y1 - 2015 ER - TY - GEN A1 - Nöchel, Ulrich A1 - Reddy, Chaganti Srinivasa A1 - Wang, Ke A1 - Cui, Jing A1 - Zizak, Ivo A1 - Behl, Marc A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Nanostructural changes in crystallizable controlling units determine the temperature-memory of polymers N2 - Temperature-memory polymers remember the temperature, where they were deformed recently, enabled by broad thermal transitions. In this study, we explored a series of crosslinked poly[ethylene-co-(vinyl acetate)] networks (cPEVAs) comprising crystallizable polyethylene (PE) controlling units exhibiting a pronounced temperature-memory effect (TME) between 16 and 99 °C related to a broad melting transition (∼100 °C). The nanostructural changes in such cPEVAs during programming and activation of the TME were analyzed via in situ X-ray scattering and specific annealing experiments. Different contributions to the mechanism of memorizing high or low deformation temperatures (Tdeform) were observed in cPEVA, which can be associated to the average PE crystal sizes. At high deformation temperatures (>50 °C), newly formed PE crystals, which are established during cooling when fixing the temporary shape, dominated the TME mechanism. In contrast, at low Tdeform (<50 °C), corresponding to a cold drawing scenario, the deformation led preferably to a disruption of existing large crystals into smaller ones, which then fix the temporary shape upon cooling. The observed mechanism of memorizing a deformation temperature might enable the prediction of the TME behavior and the knowledge based design of other TMPs with crystallizable controlling units. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 194 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81124 SP - 8284 EP - 8293 ER - TY - JOUR A1 - Nöchel, Ulrich A1 - Reddy, Chaganti Srinivasa A1 - Wang, Ke A1 - Cui, Jing A1 - Zizak, Ivo A1 - Behl, Marc A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Nanostructural changes in crystallizable controlling units determine the temperature-memory of polymers JF - Journal of Materials Chemistry A, Materials for energy and sustainability N2 - Temperature-memory polymers remember the temperature, where they were deformed recently, enabled by broad thermal transitions. In this study, we explored a series of crosslinked poly[ethylene-co-(vinyl acetate)] networks (cPEVAs) comprising crystallizable polyethylene (PE) controlling units exhibiting a pronounced temperature-memory effect (TME) between 16 and 99 °C related to a broad melting transition (∼100 °C). The nanostructural changes in such cPEVAs during programming and activation of the TME were analyzed via in situ X-ray scattering and specific annealing experiments. Different contributions to the mechanism of memorizing high or low deformation temperatures (Tdeform) were observed in cPEVA, which can be associated to the average PE crystal sizes. At high deformation temperatures (>50 °C), newly formed PE crystals, which are established during cooling when fixing the temporary shape, dominated the TME mechanism. In contrast, at low Tdeform (<50 °C), corresponding to a cold drawing scenario, the deformation led preferably to a disruption of existing large crystals into smaller ones, which then fix the temporary shape upon cooling. The observed mechanism of memorizing a deformation temperature might enable the prediction of the TME behavior and the knowledge based design of other TMPs with crystallizable controlling units. Y1 - 2015 U6 - https://doi.org/10.1039/c4ta06586g SN - 2050-7488 SN - 2050-7496 VL - 16 IS - 3 SP - 8284 EP - 8293 PB - Royal Society of Chemistry CY - Cambridge ER - TY - THES A1 - Sauter, Tilman T1 - Function by structure BT - microstructural approaches to tailor surface, mechanical and shape-memory properties of porous polymer structures Y1 - 2015 ER - TY - THES A1 - Deresch, Andreas T1 - Modellierung von Röntgenspektren für technische Anwendungen Y1 - 2015 ER - TY - THES A1 - Kappel, David T1 - Multi-spectrum retrieval of maps of Venus' surface emissivity in the infrared T1 - Multispektrum-Retrieval von Karten der Oberflächenemissivität der Venus im Infrarotbereich N2 - The main goal of this cumulative thesis is the derivation of surface emissivity data in the infrared from radiance measurements of Venus. Since these data are diagnostic of the chemical composition and grain size of the surface material, they can help to improve knowledge of the planet’s geology. Spectrally resolved images of nightside emissions in the range 1.0-5.1 μm were recently acquired by the InfraRed Mapping channel of the Visible and InfraRed Thermal Imaging Spectrometer (VIRTIS-M-IR) aboard ESA’s Venus EXpress (VEX). Surface and deep atmospheric thermal emissions in this spectral range are strongly obscured by the extremely opaque atmosphere, but three narrow spectral windows at 1.02, 1.10, and 1.18 μm allow the sounding of the surface. Additional windows between 1.3 and 2.6 μm provide information on atmospheric parameters that is required to interpret the surface signals. Quantitative data on surface and atmosphere can be retrieved from the measured spectra by comparing them to simulated spectra. A numerical radiative transfer model is used in this work to simulate the observable radiation as a function of atmospheric, surface, and instrumental parameters. It is a line-by-line model taking into account thermal emissions by surface and atmosphere as well as absorption and multiple scattering by gases and clouds. The VIRTIS-M-IR measurements are first preprocessed to obtain an optimal data basis for the subsequent steps. In this process, a detailed detector responsivity analysis enables the optimization of the data consistency. The measurement data have a relatively low spectral information content, and different parameter vectors can describe the same measured spectrum equally well. A usual method to regularize the retrieval of the wanted parameters from a measured spectrum is to take into account a priori mean values and standard deviations of the parameters to be retrieved. This decreases the probability to obtain unreasonable parameter values. The multi-spectrum retrieval algorithm MSR is developed to additionally consider physically realistic spatial and temporal a priori correlations between retrieval parameters describing different measurements. Neglecting geologic activity, MSR also allows the retrieval of an emissivity map as a parameter vector that is common to several spectrally resolved images that cover the same surface target. Even applying MSR, it is difficult to obtain reliable emissivity maps in absolute values. A detailed retrieval error analysis based on synthetic spectra reveals that this is mainly due to interferences from parameters that cannot be derived from the spectra themselves, but that have to be set to assumed values to enable the radiative transfer simulations. The MSR retrieval of emissivity maps relative to a fixed emissivity is shown to effectively avoid most emissivity retrieval errors. Relative emissivity maps at 1.02, 1.10, and 1.18 μm are finally derived from many VIRTIS-M-IR measurements that cover a surface target at Themis Regio. They are interpreted as spatial variations relative to an assumed emissivity mean of the target. It is verified that the maps are largely independent of the choice of many interfering parameters as well as the utilized measurement data set. These are the first Venus IR emissivity data maps based on a consistent application of a full radiative transfer simulation and a retrieval algorithm that respects a priori information. The maps are sufficiently reliable for future geologic interpretations. N2 - Das Hauptziel dieser publikationsbasierten Dissertation ist die Ableitung von Oberflächenemissivitäts-Daten im Infraroten aus Radianzmessungen der Venus. Da diese Daten diagnostisch bezüglich chemischer Zusammensetzung und Korngröße des Oberflächenmaterials sind, können sie zur Erweiterung des Wissens über die Geologie des Planeten beitragen. Spektral aufgelöste Bilder von nachtseitigen Emissionen im Bereich 1.0-5.1 µm wurden kürzlich durch den Infrarot-Kartierungskanal des Abbildenden Spektrometers im Sichtbaren und Infraroten Bereich (VIRTIS-M-IR) an Bord der ESA-Sonde Venus Express (VEX) gewonnen. Die thermischen Emissionen der Oberfläche sowie der tiefen Atmosphäre werden in diesem Spektralbereich stark durch die extrem licht-undurchlässige Atmosphäre verschleiert, aber drei schmale spektrale Fenster bei 1.02, 1.10 und 1.18 µm ermöglichen die Sondierung der Oberfläche. Weitere Fenster zwischen 1.3 und 2.6 µm liefern Informationen über atmosphärische Parameter, die benötigt werden, um die Oberflächensignale zu interpretieren. Quantitative Daten von Oberfläche und Atmosphäre können von den gemessenen Spektren durch Vergleiche mit simulierten Spektren abgeleitet werden. In dieser Arbeit wird ein numerisches Strahlungstransportmodell verwendet, um die beobachtbare Strahlung als Funktion von Atmosphären-, Oberflächen-, und Instrumentenparametern zu simulieren. Es ist ein Linie-für-Linie-Modell und berücksichtigt sowohl thermische Emissionen der Oberfläche und Atmosphäre, als auch Absorption und Mehrfachstreuung durch Gase und Wolken. Die VIRTIS-M-IR-Messungen werden zunächst vorverarbeitet, um eine optimale Datenbasis für die nachfolgenden Schritte zu erhalten. Eine detaillierte Analyse des Detektoransprechvermögens ermöglicht dabei die Optimierung der Datenkonsistenz. Die Messdaten haben einen vergleichsweise geringen spektralen Informationsgehalt, und verschiedene Parametervektoren können ein- und dasselbe gemessene Spektrum gleich gut beschreiben. Eine übliche Maßnahme, das Retrieval der gesuchten Parameter aus einem gemessenem Spektrum zu regularisieren, ist die Berücksichtigung von a-priori-Mittelwerten und -Standardabweichungen der zu bestimmenden Parameter. Dadurch wird die Wahrscheinlichkeit verringert, unrealistische Parameterwerte zu erhalten. Es wird der Multispektrum-Retrieval-Algorithmus MSR entwickelt, um zusätzlich physikalisch realistische räumliche und zeitliche a-priori-Korrelationen zwischen Retrievalparametern, die verschiedene Messungen beschreiben, berücksichtigen zu können. Vernachlässigt man geologische Aktivität, kann mittels MSR auch eine Emissivitätskarte in Form eines Parametervektors bestimmt werden, der verschiedenen spektral aufgelösten, denselben Oberflächenbereich überdeckenden Bildern gemeinsam ist. Selbst bei Anwendung von MSR ist es schwierig, verlässliche Karten für die Absolutwerte der Emissivität zu erhalten. Eine detaillierte Retrieval-Fehleranalyse, die auf synthetischen Spektren beruht, zeigt, dass dies hauptsächlich an Interferenzen von Parametern liegt, die nicht aus den Spektren selbst hergeleitet werden können. Um dennoch die Strahlungstransportsimulationen zu ermöglichen, müssen diese Parameter auf angenommene Werte gesetzt werden. Es wird nachgewiesen, dass durch ein MSR-Retrieval von Emissivitätskarten relativ zu einer festen Emissivität die meisten Fehler bei der Emissivitätsbestimmung effizient vermieden werden können. Abschließend werden relative Emissivitätskarten bei 1.02, 1.10 und 1.18 µm aus vielen VIRTIS-M-IR-Messungen bestimmt, die einen Oberflächenbereich in der Themis Regio überdecken. Diese Karten werden als räumliche Variationen relativ zu einer angenommenen mittleren Emissivität des Oberflächenbereichs interpretiert. Es wird nachgewiesen, dass die Karten von der Wahl vieler interferierender Parameter sowie von der Auswahl der zugrunde liegenden Messungen weitgehend unabhängig sind. Dieses sind die ersten Karten von Emissivitätsdaten der Venus im Infrarotbereich auf Basis der konsistenten Anwendung einer umfassenden Strahlungstransportsimulation und eines Retrievalalgorithmus, der a priori Informationen berücksichtigt. Die Karten sind hinreichend zuverlässig für zukünftige geologische Interpretationen. KW - Venus Express KW - VIRTIS KW - surface emissivity KW - infrared KW - radiative transfer KW - retrieval KW - multi-spectrum regularization KW - Venus Express KW - VIRTIS KW - Oberflächenemissivität KW - Infrarot KW - Strahlungstransport KW - Retrieval KW - Multi-Spektrum-Regularisierung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85301 ER - TY - THES A1 - Sauer, Tim-Oliver T1 - Quasi-condensation in low-dimensional Bose gases T1 - Quasi-Kondensation in niedrig-dimensionalen Bosegasen BT - mean-field theories and stochastic modelling BT - Molekularfeldtheorie und stochastische Modellierung N2 - The subject of the present thesis is the one-dimensional Bose gas. Since long-rang order is destroyed by infra-red fluctuations in one dimension, only the formation of a quasi-condensate is possible, which exhibits suppressed density fluctuations, but whose phase fluctuates strongly. It is shown that modified mean-field theories based on a symmetry-breaking approach can even characterise phase coherence properties of such a quasi-condensate properly. A correct description of the transition from the degenerate ideal Bose gas to the quasi-condensate, which is a smooth cross-over rather than a phase transition, is not possible though. Basic conditions for the applicability of the theories are not fulfilled in this regime, such that the existence of a critical point is predicted. The theories are compared on the basis of their excitation sprectum, equation of state, density fluctuations and related correlation functions. High-temperature expansions of the corresponding integrals are derived analytically for the numerical evaluation of the self-consistent integral equations. Apart from that, the Stochastic Gross-Pitaevskii equation (SGPE), a non-linear Langevin equation, is analysed numerically by means of Monte-Carlo simulations and the results are compared to those of the mean-field theories. In this context, a lot of attention is payed to the appropriate choice of the parameters. The simulations prove that the SGPE is capable of describing the cross-over properly, but highlight the limitations of the widely used local density approximation as well. N2 - Gegenstand der vorgelegten Arbeit ist das ein-dimensionale Bose-Gas. Da durch Infrarot-Fluktuationen langreichweitige Ordnung zerstört wird, kann sich in einer Dimension nur ein Quasi-Kondensat ausbilden, welches sich durch unterdrückte Dichte-Fluktuationen auszeichnet, dessen Phase jedoch stark fluktuiert. Es wird gezeigt, dass entsprechend angepasste Mean-field-Theorien, ausgehend von einem symmetriebrechenden Ansatz, in der Lage sind, auch Phasenkohärenzeigenschaften eines solchen Quasi-Kondensats richtig wiederzugeben. Eine Beschreibung des Übergangs vom entarteten idealen Bose-Gas zum Quasi-Kondensat, welcher kontinuierlich ist und damit keinen Phasenübergang sondern einen Cross-over darstellt, ist jedoch nicht möglich. Grundlegende Vorraussetzungen für die Anwendung der Theorien sind in diesem Regime nicht erfüllt, sodass falsche Aussagen wie die Existenz eines kritischen Punktes getroffen werden. Die Theorien werden anhand ihres Anregungsspektrums und ihrer Vorhersagen in Bezug auf die Zustandsgleichung, Dichte-Fluktuationen und damit in Beziehung stehenden Korrelationsfunktionen verglichen. Für die dafür notwendige numerische Auswertung der selbstkonsistenten Integralgleichungen werden Hochtemperaturentwicklungen der entsprechenden Integrale analytisch hergeleitet. Darüber hinaus wird die Stochastische Gross-Pitaevskii (SGP) Gleichung, eine nicht-lineare Langevin-Gleichung, numerisch mittels Monte-Carlo Simulationen analysiert und ihre Ergebnisse mit denen der Mean-field-Theorien verglichen. Dabei erfolgt eine intensive Auseinandersetzung mit der adäquaten Wahl der Parameter. Die Simulationen beweisen, dass die SGP Gleichung den Cross-over beschreiben kann, zeigen jedoch auch die Grenzen der oft verwendeten lokalen Dichte-Näherung auf. KW - Bose-Einstein Kondensation KW - Quasi-Kondensat KW - kritische Fluktuationen KW - Mean-field Theorie KW - Stochastische Gross-Pitaevskii Gleichung KW - Bogoliubov-Theorie KW - lokale Dichte-Näherung KW - Bosegas KW - Phasenübergang KW - Bose-Einstein condensation KW - quasi-condensate KW - critical fluctuations KW - mean-field theory KW - stochastic Gross-Pitaevskii equation KW - Bogoliubov theory KW - local density approximation KW - bose gas KW - phase transition Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-87247 ER - TY - THES A1 - Sander, Andreas Alexander Christoph T1 - Radiatively driven winds of hot stars BT - Coupling hydrodynamics with detailed non-LTE radiative transfer Y1 - 2015 ER - TY - THES A1 - Ermilova, Elena T1 - Breitbandige dielektrische Charakterisierung biologisch relevanter Polymere Y1 - 2015 ER - TY - THES A1 - Siegel, Daniel T1 - Binary neutron star mergers and short gamma-ray bursts BT - magnetohydrodynamics and electromagnetic emission Y1 - 2015 ER - TY - JOUR A1 - Metzler, Ralf A1 - Cherstvy, Andrey G. A1 - Chechkin, Aleksei V. A1 - Bodrova, Anna S. T1 - Ultraslow scaled Brownian motion JF - New journal of physics : the open-access journal for physics N2 - We define and study in detail utraslow scaled Brownian motion (USBM) characterized by a time dependent diffusion coefficient of the form . For unconfined motion the mean squared displacement (MSD) of USBM exhibits an ultraslow, logarithmic growth as function of time, in contrast to the conventional scaled Brownian motion. In a harmonic potential the MSD of USBM does not saturate but asymptotically decays inverse-proportionally to time, reflecting the highly non-stationary character of the process. We show that the process is weakly non-ergodic in the sense that the time averaged MSD does not converge to the regular MSD even at long times, and for unconfined motion combines a linear lag time dependence with a logarithmic term. The weakly non-ergodic behaviour is quantified in terms of the ergodicity breaking parameter. The USBM process is also shown to be ageing: observables of the system depend on the time gap between initiation of the test particle and start of the measurement of its motion. Our analytical results are shown to agree excellently with extensive computer simulations. KW - anomalous diffusion KW - stochastic processes KW - ageing Y1 - 2015 U6 - https://doi.org/10.1088/1367-2630/17/6/063038 SN - 1367-2630 VL - 17 IS - 063038 PB - Dt. Physikalische Ges., IOP CY - Bad Honnef, London ER - TY - GEN A1 - Metzler, Ralf A1 - Cherstvy, Andrey G. A1 - Chechkin, Aleksei V. A1 - Bodrova, Anna S. T1 - Ultraslow scaled Brownian motion T2 - New journal of physics : the open-access journal for physics N2 - We define and study in detail utraslow scaled Brownian motion (USBM) characterized by a time dependent diffusion coefficient of the form . For unconfined motion the mean squared displacement (MSD) of USBM exhibits an ultraslow, logarithmic growth as function of time, in contrast to the conventional scaled Brownian motion. In a harmonic potential the MSD of USBM does not saturate but asymptotically decays inverse-proportionally to time, reflecting the highly non-stationary character of the process. We show that the process is weakly non-ergodic in the sense that the time averaged MSD does not converge to the regular MSD even at long times, and for unconfined motion combines a linear lag time dependence with a logarithmic term. The weakly non-ergodic behaviour is quantified in terms of the ergodicity breaking parameter. The USBM process is also shown to be ageing: observables of the system depend on the time gap between initiation of the test particle and start of the measurement of its motion. Our analytical results are shown to agree excellently with extensive computer simulations. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 188 KW - anomalous diffusion KW - stochastic processes KW - ageing Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-78618 ER - TY - THES A1 - Vlasov, Vladimir T1 - Synchronization of oscillatory networks in terms of global variables T1 - Synchronisation in Netzwerken von Oszillatoren via globaler Variabler N2 - Synchronization of large ensembles of oscillators is an omnipresent phenomenon observed in different fields of science like physics, engineering, life sciences, etc. The most simple setup is that of globally coupled phase oscillators, where all the oscillators contribute to a global field which acts on all oscillators. This formulation of the problem was pioneered by Winfree and Kuramoto. Such a setup gives a possibility for the analysis of these systems in terms of global variables. In this work we describe nontrivial collective dynamics in oscillator populations coupled via mean fields in terms of global variables. We consider problems which cannot be directly reduced to standard Kuramoto and Winfree models. In the first part of the thesis we adopt a method introduced by Watanabe and Strogatz. The main idea is that the system of identical oscillators of particular type can be described by a low-dimensional system of global equations. This approach enables us to perform a complete analytical analysis for a special but vast set of initial conditions. Furthermore, we show how the approach can be expanded for some nonidentical systems. We apply the Watanabe-Strogatz approach to arrays of Josephson junctions and systems of identical phase oscillators with leader-type coupling. In the next parts of the thesis we consider the self-consistent mean-field theory method that can be applied to general nonidentical globally coupled systems of oscillators both with or without noise. For considered systems a regime, where the global field rotates uniformly, is the most important one. With the help of this approach such solutions of the self-consistency equation for an arbitrary distribution of frequencies and coupling parameters can be found analytically in the parametric form, both for noise-free and noisy cases. We apply this method to deterministic Kuramoto-type model with generic coupling and an ensemble of spatially distributed oscillators with leader-type coupling. Furthermore, with the proposed self-consistent approach we fully characterize rotating wave solutions of noisy Kuramoto-type model with generic coupling and an ensemble of noisy oscillators with bi-harmonic coupling. Whenever possible, a complete analysis of global dynamics is performed and compared with direct numerical simulations of large populations. N2 - Die Synchronisation einer großen Menge von Oszillatoren ist ein omnipräsentes Phänomen, das in verschiedenen Forschungsgebieten wie Physik, Ingenieurwissenschaften, Medizin und Weiteren beobachtet wird. In der einfachsten Situation ist von einer Menge Phasenoszillatoren jeder mit dem Anderen gekoppelt und trägt zu einem gemeinsamen Feld (dem sogenannten mean field) bei, das auf alle Oszillatoren wirkt. Dieser Formulierung wurde von Winfree und Kuramoto der Weg bereitet und sie birgt die Möglichkeit einer Analyse des Systems mithilfe von globalen Variablen. In dieser Arbeit beschreiben wir mithilfe globaler Variablen die nicht-triviale kollektive Dynamik von Oszillatorpopulationen, welche mit einem mean field verbunden sind. Wir beschäftigen uns mit Problemen die nicht direkt auf die Standardmodelle von Kuramoto und Winfree reduziert werden können. Im ersten Teil der Arbeit verwenden wir eine Methode die auf Watanabe und Stro- gatz zurückgeht. Die Hauptidee ist, dass ein System von identischen Oszillatoren eines bestimmten Typs durch ein niedrig-dimensionales System von globalen Gleichungen beschrieben werden kann. Dieser Ansatz versetzt uns in die Lage eine vollständige analytische Untersuchung für eine spezielle jedoch große Menge an Anfangsbedingungen durchzuführen. Wir zeigen des Weiteren wie der Ansatz auf nicht-identische Systeme erweitert werden kann. Wir wenden die Methode von Watanabe und Strogatz auf Reihen von Josephson-Kontakten und auf identische Phasenoszillatoren mit einer Anführer-Kopplung an. Im nächsten Teil der Arbeit betrachten wir eine selbst-konsistente mean-field-Methode, die auf allgemeine nicht-identische global gekoppelte Phasenoszillatoren mit oder ohne Rauschen angewendet werden kann. Für die betrachteten Systeme gibt es ein Regime, in dem die globalen Felder gleichförmig rotieren. Dieses ist das wichtigste Regime. Es kann mithilfe unseres Ansatzes als Lösung einer Selbstkonsistenzgleichung für beliebige Verteilungen der Frequenzen oder Kopplungsstärken gefunden werden. Die Lösung liegt in einer analytischen, parametrischen Form sowohl für den Fall mit Rauschen, als auch für den Fall ohne Rauschen, vor. Die Methode wird auf ein deterministisches System der Kuramoto-Art mit generischer Kopplung und auf ein Ensemble von räumlich verteilten Oszillatoren mit Anführer-Kopplung angewendet. Zuletzt sind wir in der Lage, die Rotierende-Wellen-Lösungen der Kuramoto-artigen Modelle mit generischer Kopplung, sowie ein Ensemble von verrauschten Oszillatoren mit bi-harmonischer Kopplung, mithilfe des von uns vorgeschlagenen selbst-konsistenten Ansatzes vollständig zu charakterisieren. Wann immer es möglich war, wurde eine vollständige Untersuchung der globalen Dynamik durchgeführt und mit numerischen Ergebnissen von großen Populationen verglichen. KW - synchronization KW - Synchronisation KW - complex networks KW - komplexe Netzwerke KW - global description Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-78182 ER -