TY - BOOK A1 - Laloë, Franck T1 - Grundlagen kontinuierlicher Symmetrien BT - von der Raumzeit zur Quantenmechanik N2 - Das neue Buch von Franck Laloë stellt einen symmetriebasierten Ansatz vor, um die Quantenmechanik auf einer fundamentalen Ebene zu verstehen, und liefert die dazugehörigen Rechentechniken, um fortgeschrittene Kurse über Kernphysik, Quantenoptik und Festkörperphysik zu meistern. Y1 - 2024 SN - 978-3-527-41415-4 SN - 978-3-527-83999-5 SN - 978-3-527-83998-8 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Schröder, Jakob T1 - Fundamentals of diffraction-based residual stress and texture analysis of laser powder bed fused Inconel 718 T1 - Grundlagen der beugungsbasierten Eigenspannungs- und Texturanalyse von laserstrahlgeschmolzenem Inconel 718 N2 - Additive manufacturing (AM) processes enable the production of metal structures with exceptional design freedom, of which laser powder bed fusion (PBF-LB) is one of the most common. In this process, a laser melts a bed of loose feedstock powder particles layer-by-layer to build a structure with the desired geometry. During fabrication, the repeated melting and rapid, directional solidification create large temperature gradients that generate large thermal stress. This thermal stress can itself lead to cracking or delamination during fabrication. More often, large residual stresses remain in the final part as a footprint of the thermal stress. This residual stress can cause premature distortion or even failure of the part in service. Hence, knowledge of the residual stress field is critical for both process optimization and structural integrity. Diffraction-based techniques allow the non-destructive characterization of the residual stress fields. However, such methods require a good knowledge of the material of interest, as certain assumptions must be made to accurately determine residual stress. First, the measured lattice plane spacings must be converted to lattice strains with the knowledge of a strain-free material state. Second, the measured lattice strains must be related to the macroscopic stress using Hooke's law, which requires knowledge of the stiffness of the material. Since most crystal structures exhibit anisotropic material behavior, the elastic behavior is specific to each lattice plane of the single crystal. Thus, the use of individual lattice planes in monochromatic diffraction residual stress analysis requires knowledge of the lattice plane-specific elastic properties. In addition, knowledge of the microstructure of the material is required for a reliable assessment of residual stress. This work presents a toolbox for reliable diffraction-based residual stress analysis. This is presented for a nickel-based superalloy produced by PBF-LB. First, this work reviews the existing literature in the field of residual stress analysis of laser-based AM using diffraction-based techniques. Second, the elastic and plastic anisotropy of the nickel-based superalloy Inconel 718 produced by PBF-LB is studied using in situ energy dispersive synchrotron X-ray and neutron diffraction techniques. These experiments are complemented by ex situ material characterization techniques. These methods establish the relationship between the microstructure and texture of the material and its elastic and plastic anisotropy. Finally, surface, sub-surface, and bulk residual stress are determined using a texture-based approach. Uncertainties of different methods for obtaining stress-free reference values are discussed. The tensile behavior in the as-built condition is shown to be controlled by texture and cellular sub-grain structure, while in the heat-treated condition the precipitation of strengthening phases and grain morphology dictate the behavior. In fact, the results of this thesis show that the diffraction elastic constants depend on the underlying microstructure, including texture and grain morphology. For columnar microstructures in both as-built and heat-treated conditions, the diffraction elastic constants are best described by the Reuss iso-stress model. Furthermore, the low accumulation of intergranular strains during deformation demonstrates the robustness of using the 311 reflection for the diffraction-based residual stress analysis with columnar textured microstructures. The differences between texture-based and quasi-isotropic approaches for the residual stress analysis are shown to be insignificant in the observed case. However, the analysis of the sub-surface residual stress distributions show, that different scanning strategies result in a change in the orientation of the residual stress tensor. Furthermore, the location of the critical sub-surface tensile residual stress is related to the surface roughness and the microstructure. Finally, recommendations are given for the diffraction-based determination and evaluation of residual stress in textured additively manufactured alloys. N2 - Additive Fertigungsverfahren (AM) ermöglichen die Herstellung von Metallstrukturen mit außergewöhnlicher Gestaltungsfreiheit, wobei das pulverbettbasierte Laserstrahlschmelzen (PBF-LB) eines der gängigsten dieser Verfahren darstellt. In diesem Verfahren schmilzt ein Laser ein Pulverbett schichtweise auf, um ein Bauteil mit der gewünschten Geometrie zu erzeugen. Während der Fertigung kommt es aufgrund des wiederholten Aufschmelzens und der schnellen, gerichteten Erstarrung zu hohen Temperaturgradienten, die hohe thermische Spannungen erzeugen. Einerseits können diese thermischen Spannungen während des Fertigungsprozesses zur Rissbildung oder zur Ablösung des Bauteils führen. Häufiger jedoch verbleiben große Eigenspannungen im gefertigten Bauteil als Folge der thermischen Spannungen. Diese Eigenspannungen begünstigen die Verzerrung der Bauteile und können sogar ihr vorzeitiges Versagen im Betrieb verursachen. Daher ist die Kenntnis der Eigenspannungsverteilung im Bauteil sowohl für die Prozessoptimierung als auch die strukturelle Integrität bedeutend. Beugungsbasierte Verfahren ermöglichen die zerstörungsfreie Bestimmung des Eigenspannungsfeldes. Diese Verfahren erfordern jedoch eine vorhergehende Kenntnis der Materialeigenschaften, da gewisse Annahmen getroffen werden müssen, um die Eigenspannungen genau bestimmen zu können. Zunächst müssen aus den gemessenen Abständen der Gitterebenen Gitterdehnungen berechnet werden, wozu der dehnungsfreie Referenzzustand bekannt sein muss. Weiterhin müssen die Gitterdehnungen über das Hookesche Gesetz, unter Bezugnahme der elastischen Eigenschaften, in Spannungen überführt werden. Da die meisten Kristallstrukturen durch ein anisotropes Verhalten gekennzeichnet sind, ist ihr elastisches Verhalten für jede Gitterebene spezifisch. Deshalb bedarf es bei der Nutzung monochromatischer Strahlung zur beugungsbasierten Eigenspannungsbestimmung der Kenntnis der gitterebenenspezifischen elastischen Eigenschaften. Zusätzlich ist das Wissen über die Mikrostruktur des Materials unabdingbar für eine zuverlässige Bestimmung der Eigenspannungen. Die vorliegende Arbeit präsentiert eine Reihe von Bedingungen, die für eine zuverlässige beugungsbasierte Eigenspannungsanalyse notwendig sind. Dies wird exemplarisch an einer mittels PBF-LB gefertigten Nickelbasis Superlegierung gezeigt. Einleitend wird ein Überblick der Literatur im Bereich der beugungsbasierten Eigenspannungsanalyse mit Bezug zur additiven Fertigung gegeben. Anschließend wird die elastische und plastische Anisotropie der mittels PBF-LB gefertigten Nickelbasis Superlegierung Inconel 718 durch in situ energiedispersive Synchrotron Röntgen- und Neutronenbeugung charakterisiert. Diese Methoden werden durch ex situ Untersuchungsverfahren ergänzt. So wird die Beziehung zwischen der Mikrostruktur und der Textur zur elastischen und plastischen Anisotropie hergestellt. Abschließend werden die Oberflächen-, oberflächennahen-, sowie Volumeneigenspannungen in einem texturbasierten Ansatz bestimmt. Dabei werden Unsicherheiten verschiedener Methoden zur Bestimmung der spannungsfreien Referenz diskutiert. Das mechanische Verhalten unter Zugbelastung des as-built Zustandes ist dabei durch die Textur und die zelluläre Substruktur bedingt, während es im wärmebehandelten Zustand vom Ausscheidungszustand und der geänderten Kornmorphologie bestimmt wird. Die Ergebnisse dieser Arbeit zeigen, dass die diffraktionselastischen Konstanten von der zugrundeliegenden Mikrostruktur abhängen. Für die kolumnaren Mikrostrukturen, egal ob im as-built oder wärmebehandeltem Zustand, werden die diffraktionselastischen Konstanten am besten durch die Reuss Annahme homogener Spannung beschrieben. Darüber hinaus zeigt die geringe Akkumulation intergranularer Dehnung des 311 Reflexes seine Robustheit für die beugungsbasierte Eigenspannungsanalyse. Im vorhandenen Fall ist der Unterschied zwischen texturbasierten und quasiisotropen Ansätzen zur Eigenspannungsanalyse unbedeutend. Oberflächennahe Eigenspannungsanalysen zeigen jedoch, dass verschiedene Scanstrategien zu einer Änderung in der Ausrichtung des Eigenspannungstensors führen. Weiterhin zeigt die Lage der kritischen oberflächennahen Zugeigenspannungen eine Abhängigkeit zur Oberflächenrauheit und dem Gefüge. Abschließend werden Empfehlungen zur beugungsbasierten Ermittlung und Bewertung von Eigenspannungen in texturierten additiv gefertigten Legierungen gegeben. KW - residual stress KW - diffraction KW - texture KW - mechanical behavior KW - in-situ testing KW - laser powder bed fusion KW - additive manufacturing KW - electron backscatter diffraction KW - diffraction elastic constants KW - Inconel 718 KW - Inconel 718 KW - additive Fertigung KW - Diffraktion KW - diffraktionselastische Konstanten KW - Elektronenrückstreubeugung KW - In-situ Experimente KW - Laserstrahlschmelzen KW - mechanisches Verhalten KW - Eigenspannung KW - Textur Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-621972 ER - TY - THES A1 - Gostkowska-Lekner, Natalia Katarzyna T1 - Organic-inorganic hybrids based on P3HT and mesoporous silicon for thermoelectric applications T1 - Organisch-anorganische Hybride basierend auf P3HT und porösem Silizium für thermoelektrische Anwendungen N2 - This thesis presents a comprehensive study on synthesis, structure and thermoelectric transport properties of organic-inorganic hybrids based on P3HT and porous silicon. The effect of embedding polymer in silicon pores on the electrical and thermal transport is studied. Morphological studies confirm successful polymer infiltration and diffusion doping with roughly 50% of the pore space occupied by conjugated polymer. Synchrotron diffraction experiments reveal no specific ordering of the polymer inside the pores. P3HT-pSi hybrids show improved electrical transport by five orders of magnitude compared to porous silicon and power factor values comparable or exceeding other P3HT-inorganic hybrids. The analysis suggests different transport mechanisms in both materials. In pSi, the transport mechanism relates to a Meyer-Neldel compansation rule. The analysis of hybrids' data using the power law in Kang-Snyder model suggests that a doped polymer mainly provides charge carriers to the pSi matrix, similar to the behavior of a doped semiconductor. Heavily suppressed thermal transport in porous silicon is treated with a modified Landauer/Lundstrom model and effective medium theories, which reveal that pSi agrees well with the Kirkpatrick model with a 68% percolation threshold. Thermal conductivities of hybrids show an increase compared to the empty pSi but the overall thermoelectric figure of merit ZT of P3HT-pSi hybrid exceeds both pSi and P3HT as well as bulk Si. N2 - Diese Arbeit präsentiert eine umfassende Studie über Synthese, Struktur und thermoelektrische Transporteigenschaften von organisch-anorganischen Hybriden basierend auf P3HT und porösem Silizium. Es wird die Auswirkung der Einbettung von Polymerin Siliziumporen auf den elektrischen und thermischen Transport untersucht. Morphologische Studien bestätigen eine erfolgreiche Polymerinfiltration und Diffusionsdotierung, wobei etwa 50% des Porenraums mit konjugiertem Polymer gefüllt sind. Synchrotronexperimente zeigen keine spezifische Ordnung des Polymers innerhalb der Poren. P3HT-pSi-Hybride zeigen einen um fünf Größenordnungen verbesserten elektrischen Transport im Vergleich zu porösem Silizium und sogenannte Powerfaktoren, die mit anderen P3HT-anorganischen Hybriden vergleichbar sind oder diese übertreffen. Die Analyse lässt auf unterschiedliche Transportmechanismen in beiden Materialien schließen. In pSi bezieht sich der Transportmechanismus auf eine Meyer-Neldel-{Kompensa\-tionsregel}. Die Analyse der Hybriddaten unter Verwendung des Potenzgesetzes im Kang-Snyder-Modell legt nahe, dass ein dotiertes Polymer hauptsächlich Ladungsträger für die pSi-Matrix bereitstellt, ähnlich dem Verhalten eines {dotier\-ten} Halbleiters. Der stark unterdrückte Wärmetransport in porösem Silizium wird mit einem modifizierten Landauer/Lundstrom-Modell und Effektivmediumtheorien behandelt, die zeigen, dass pSi mit einem Perkolationsschwellenwert von 68% gut mit dem Kirkpatrick-Modell übereinstimmt. Die {Wärmeleitfähigkei\-ten} von Hybriden zeigen einen Anstieg im Vergleich zum leeren pSi, aber der gesamte thermoelektrische Gütefaktor ZT des P3HT-pSi-Hybrids übertrifft sowohl pSi und P3HT als auch den von Bulk-Si. KW - physics KW - energy KW - thermoelectricity KW - organic-inorganic hybrids KW - Energie KW - organisch-anorganische Hybride KW - Physik KW - Thermoelektrizität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620475 ER - TY - THES A1 - Littmann, Daniela-Christin T1 - Large eddy simulations of the Arctic boundary layer around the MOSAiC drift track T1 - Large-Eddy-Simulationen der arktischen Grenzschicht um die MOSAiC-Driftroute N2 - The icosahedral non-hydrostatic large eddy model (ICON-LEM) was applied around the drift track of the Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 and 2020. The model was set up with horizontal grid-scales between 100m and 800m on areas with radii of 17.5km and 140 km. At its lateral boundaries, the model was driven by analysis data from the German Weather Service (DWD), downscaled by ICON in limited area mode (ICON-LAM) with horizontal grid-scale of 3 km. The aim of this thesis was the investigation of the atmospheric boundary layer near the surface in the central Arctic during polar winter with a high-resolution mesoscale model. The default settings in ICON-LEM prevent the model from representing the exchange processes in the Arctic boundary layer in accordance to the MOSAiC observations. The implemented sea-ice scheme in ICON does not include a snow layer on sea-ice, which causes a too slow response of the sea-ice surface temperature to atmospheric changes. To allow the sea-ice surface to respond faster to changes in the atmosphere, the implemented sea-ice parameterization in ICON was extended with an adapted heat capacity term. The adapted sea-ice parameterization resulted in better agreement with the MOSAiC observations. However, the sea-ice surface temperature in the model is generally lower than observed due to biases in the downwelling long-wave radiation and the lack of complex surface structures, like leads. The large eddy resolving turbulence closure yielded a better representation of the lower boundary layer under strongly stable stratification than the non-eddy-resolving turbulence closure. Furthermore, the integration of leads into the sea-ice surface reduced the overestimation of the sensible heat flux for different weather conditions. The results of this work help to better understand boundary layer processes in the central Arctic during the polar night. High-resolving mesoscale simulations are able to represent temporally and spatially small interactions and help to further develop parameterizations also for the application in regional and global models. N2 - Das icosahedral non-hydrostatische large eddy model (ICON-LEM) wurde entlang des Driftweges des Multidisciplinary Observatory Study of the Arctic (MOSAiC) in 2019 und 20 angewendet. Das Modell nutzte horizontale Gitterauflösungen zwischen 100m und 800m auf Gebieten mit Durchmessern von 17.5km und 140 km. An den seitlichen Rändern wurde das Modell mit Analysedaten des Deutschen Wetterdienstes (DWD) angetrieben, welche mit ICON im limited area mode (ICON-LAM) mit einer horizontalen Auflösung von 3km herunterskaliert wurden. Ziel dieser Arbeit war es, die flache atmosphärische Grenzschicht in der zentralen Arktis während des polaren Winters mit einem hochauflösenden mesoskaligen Modell zu untersuchen. Die standardmäßigen Einstellungen in ICON-LEM machen es dem Modell unmöglich, die wechselwirkenden Austauschprozesse in der arktischen Grenzschicht gemäß der MOSAiC Beobachtungen abzubilden. Das implementierte Meereis-Schema in ICON beinhaltet keine Schneeschicht auf dem Meereis, was eine zu große Verzögerung der Meereisoberflächentemperatur auf atmosphärische Veränderungen bewirkt. Um die Meereisfläche schneller auf Änderungen in der Atmosphäre reagieren lassen zu können, wurde die bestehende Meereisparameterisierung in ICON um einen angepasstenWärmekapazitätsterm erweitert. Die angepasste Meereis-Parameterisierung stimmte besser mit den MOSAiC Beobachtungen überein. Allerdings ist die Meereisoberflächentemperatur im Modell aufgrund der fehlerbehafteten einfallenden, langwelligen Strahlung und dem Fehlen komplexer Oberflächenstrukturen im Meereis generell niedriger als beobachtet. Die groß-wirbellige Turbulenz-Schliessung wird der Darstellung der unteren Grenschicht während starker stabiler Schichtung besser gerecht als die Nicht-Wirbel-auflösende Turbulenz-Schließung. Desweiteren reduzierte die Integration der Risse in der Meereisoberfläche die Abweichung der sensiblen Wärme für verschiedene Wetterzustände. Die Ergebnisse dieser Arbeit helfen die Grenzschicht-Prozesse in der zentralen Arktis während der polaren Nacht besser zu verstehen. Hochauflösende mesoskalige Simulationen ermöglichen die Repräsentation zeitlicher und räumlicher klein-skaliger Wechselwirkungen und bestehende Parametrisierungen auch für regionale und globale Modelle weiterzuentwickeln. KW - Arctic KW - atmosphere KW - atmospheric science KW - high resolution KW - boundary layer KW - stable stratification KW - heat flux KW - heat capacity KW - Arktis KW - Atmosphäre KW - Atmosphärenforschung KW - hohe Auflösung KW - Grenzschicht KW - stabile Schichtung KW - Wärmefluss KW - Wärmekapazität Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-624374 ER - TY - THES A1 - Shaw, Vasundhara T1 - Cosmic-ray transport and signatures in their local environment N2 - The origin and structure of magnetic fields in the Galaxy are largely unknown. What is known is that they are essential for several astrophysical processes, in particular the propagation of cosmic rays. Our ability to describe the propagation of cosmic rays through the Galaxy is severely limited by the lack of observational data needed to probe the structure of the Galactic magnetic field on many different length scales. This is particularly true for modelling the propagation of cosmic rays into the Galactic halo, where our knowledge of the magnetic field is particularly poor. In the last decade, observations of the Galactic halo in different frequency regimes have revealed the existence of out-of-plane bubble emission in the Galactic halo. In gamma rays these bubbles have been termed Fermi bubbles with a radial extent of ≈ 3 kpc and an azimuthal height of ≈ 6 kpc. The radio counterparts of the Fermi bubbles were seen by both the S-PASS telescopes and the Planck satellite, and showed a clear spatial overlap. The X-ray counterparts of the Fermi bubbles were named eROSITA bubbles after the eROSITA satellite, with a radial width of ≈ 7 kpc and an azimuthal height of ≈ 14 kpc. Taken together, these observations suggest the presence of large extended Galactic Halo Bubbles (GHB) and have stimulated interest in exploring the less explored Galactic halo. In this thesis, a new toy model (GHB model) for the magnetic field and non-thermal electron distribution in the Galactic halo has been proposed. The new toy model has been used to produce polarised synchrotron emission sky maps. Chi-square analysis was used to compare the synthetic skymaps with the Planck 30 GHz polarised skymaps. The obtained constraints on the strength and azimuthal height were found to be in agreement with the S-PASS radio observations. The upper, lower and best-fit values obtained from the above chi-squared analysis were used to generate three separate toy models. These three models were used to propagate ultra-high energy cosmic rays. This study was carried out for two potential sources, Centaurus A and NGC 253, to produce magnification maps and arrival direction skymaps. The simulated arrival direction skymaps were found to be consistent with the hotspots of Centaurus A and NGC 253 as seen in the observed arrival direction skymaps provided by the Pierre Auger Observatory (PAO). The turbulent magnetic field component of the GHB model was also used to investigate the extragalactic dipole suppression seen by PAO. UHECRs with an extragalactic dipole were forward-tracked through the turbulent GHB model at different field strengths. The suppression in the dipole due to the varying diffusion coefficient from the simulations was noted. The results could also be compared with an analytical analogy of electrostatics. The simulations of the extragalactic dipole suppression were in agreement with similar studies carried out for galactic cosmic rays. N2 - Unsere Galaxie wird ständig von hochenergetischen geladenen Teilchen unterschiedlicher Energie bombardiert, die als kosmische Strahlung bezeichnet werden und deren Ursprung nicht bekannt ist. Satelliten- und erdgestützte Messungen haben bisher ergeben, dass es in unserer Galaxie Beschleuniger für kosmische Strahlung gibt, z. B. die Überreste explodierender Sterne (Supernova-Überreste), aber bei den höchsten kosmischen Strahlungsenergien bleiben die Quellen ein Rätsel. Fortschritte zu erzielen ist eine Herausforderung, auch weil die kosmische Strahlung durch Magnetfelder abgelenkt wird, was bedeutet, dass die beobachtete Richtung mit der Richtung der Quelle übereinstimmen kann oder auch nicht. Unsere Galaxie weist starke Magnetfelder auf, deren Beschaffenheit noch nicht gut verstanden ist, insbesondere in der Komponente außerhalb der Scheibe (dem galaktischen Halo). Darüber hinaus haben Beobachtungen in den letzten zehn Jahren blasenartige Strukturen im galaktischen Halo mit enormen Gesamtenergien aufgedeckt, die auch als galaktische Halo-Blasen bezeichnet werden. All dies motiviert uns, den galaktischen Halo zu untersuchen. In meiner Doktorarbeit schlagen wir ein neues, vereinfachtes Magnetfeldmodell für galaktische Halo-Blasen vor. Das Modell umfasst sowohl strukturierte als auch turbulente Komponenten des Magnetfelds. Das vereinfachte Modell wurde mit Beobachtungsdaten verglichen, um den am besten passenden Parametersatz zusammen mit den Unsicherheiten zu erhalten. Ich untersuchte die Propagation der ultrahochenergetischen kosmischen Strahlung durch das vereinfachte Modell und untersuchte dessen Auswirkungen auf die Ankunftsrichtungen der ultrahochenergetischen kosmischen Strahlung für zwei potenzielle Quellen, Centaurus~A und NGC~253. Außerdem habe ich sowohl numerisch als auch analytisch abgeschätzt, wie stark ein Dipol der extragalaktischen kosmischen Strahlung durch verschiedene Konfigurationen der turbulenten Magnetfelder des vereinfachten Modells unterdrückt wird. Die Ergebnisse all dieser Arbeiten werden in dieser Arbeit im Detail vorgestellt. KW - galactic magnetic fields KW - synchrotron radiation KW - non-thermal radiation KW - ultra-high energy cosmic rays KW - cosmic ray propagation KW - Ausbreitung der kosmischen Strahlung KW - galaktische Magnetfelder KW - nicht-thermische Strahlung KW - Synchrotronstrahlung KW - ultrahochenergetische kosmische Strahlung Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-620198 ER - TY - THES A1 - Dörries, Timo Julian T1 - Anomalous transport and non-Gaussian dynamics in mobile-immobile models N2 - The mobile-immobile model (MIM) has been established in geoscience in the context of contaminant transport in groundwater. Here the tracer particles effectively immobilise, e.g., due to diffusion into dead-end pores or sorption. The main idea of the MIM is to split the total particle density into a mobile and an immobile density. Individual tracers switch between the mobile and immobile state following a two-state telegraph process, i.e., the residence times in each state are distributed exponentially. In geoscience the focus lies on the breakthrough curve (BTC), which is the concentration at a fixed location over time. We apply the MIM to biological experiments with a special focus on anomalous scaling regimes of the mean squared displacement (MSD) and non-Gaussian displacement distributions. As an exemplary system, we have analysed the motion of tau proteins, that diffuse freely inside axons of neurons. Their free diffusion thereby corresponds to the mobile state of the MIM. Tau proteins stochastically bind to microtubules, which effectively immobilises the tau proteins until they unbind and continue diffusing. Long immobilisation durations compared to the mobile durations give rise to distinct non-Gaussian Laplace shaped distributions. It is accompanied by a plateau in the MSD for initially mobile tracer particles at relevant intermediate timescales. An equilibrium fraction of initially mobile tracers gives rise to non-Gaussian displacements at intermediate timescales, while the MSD remains linear at all times. In another setting bio molecules diffuse in a biosensor and transiently bind to specific receptors, where advection becomes relevant in the mobile state. The plateau in the MSD observed for the advection-free setting and long immobilisation durations persists also for the case with advection. We find a new clear regime of anomalous diffusion with non-Gaussian distributions and a cubic scaling of the MSD. This regime emerges for initially mobile and for initially immobile tracers. For an equilibrium fraction of initially mobile tracers we observe an intermittent ballistic scaling of the MSD. The long-time effective diffusion coefficient is enhanced by advection, which we physically explain with the variance of mobile durations. Finally, we generalize the MIM to incorporate arbitrary immobilisation time distributions and focus on a Mittag-Leffler immobilisation time distribution with power-law tail ~ t^(-1-mu) with 0