TY - THES A1 - Wieland, Volkmar T1 - Particle-in-cell simulations of perpendicular supernova shock fronts T1 - Particle-in-Cell Simulationen von senkrechten Supernova Schock-Fronten N2 - The origin of cosmic rays was the subject of several studies for over a century. The investigations done within this dissertation are one small step to shed some more light on this mystery. Locating the sources of cosmic rays is not trivial due to the interstellar magnetic field. However, the Hillas criterion allows us to arrive at the conclusion that supernova remnants are our main suspect for the origin of galactic cosmic rays. The mechanism by which they are accelerating particles is found within the field of shock physics as diffusive shock acceleration. To allow particles to enter this process also known as Fermi acceleration pre-acceleration processes like shock surfing acceleration and shock drift acceleration are necessary. Investigating the processes happening in the plasma shocks of supernova remnants is possible by utilising a simplified model which can be simulated on a computer using Particle-in-Cell simulations. We developed a new and clean setup to simulate the formation of a double shock, i.e., consisting of a forward and a reverse shock and a contact discontinuity, by the collision of two counter-streaming plasmas, in which a magnetic field can be woven into. In a previous work, we investigated the processes at unmagnetised and at magnetised parallel shocks, whereas in the current work, we move our investigation on to magnetised perpendicular shocks. Due to a much stronger confinement of the particles to the collision region the perpendicular shock develops much faster than the parallel shock. On the other hand, this leads to much weaker turbulence. We are able to find indications for shock surfing acceleration and shock drift acceleration happening at the two shocks leading to populations of pre-accelerated particles that are suitable as a seed population to be injected into further diffusive shock acceleration to be accelerated to even higher energies. We observe the development of filamentary structures in the shock ramp of the forward shock, but not at the reverse shock. This leads to the conclusion that the development of such structures in the shock ramp of quasi-perpendicular collisionless shocks might not necessarily be determined by the existence of a critical sonic Mach number but by a critical shock speed. The results of the investigations done within this dissertation might be useful for further studies of oblique shocks and for studies using hybrid or magnetohydrodynamic simulations. Together with more sophisticated observational methods, these studies will help to bring us closer to an answer as to how particles can be accelerated in supernova remnants and eventually become cosmic rays that can be detected on Earth. N2 - Der Ursprung der kosmischen Strahlung war seit über einem Jahrhundert Gegenstand von zahlreichen Untersuchungen. Die Untersuchungen, welche innerhalb dieser Dissertation gemacht wurden, sind ein kleiner Schritt dazu etwas mehr Licht auf dieses Geheimnis zu werfen. Die Quellen der kosmischen Strahlung herauszufinden stellt sich aufgrund des interstellaren Magnetfeldes als nicht trivial heraus. Jedoch erlaubt uns das Hillas-Kriterium die Schlussfolgerung, dass Supernovaüberreste unsere Hauptverdächtigen für den Ursprung der galaktischen kosmischen Strahlung sind. Der Mechanismus, durch welchen sie Teilchen beschleunigen, kann im Gebiet der Schock-Physik in Form der diffusen Schockbeschleunigung gefunden werden. Um den Teilchen zu ermöglichen an diesem Prozess, der auch als Fermi-Beschleunigung bekannt ist, teilzunehmen, sind Vorbeschleunigungsprozesse wie die Schock-Surfing-Beschleunigung und die Schock-Drift-Beschleunigung nötig. Die Untersuchung der Prozesse in Plasma-Schocks ist durch die Verwendung eines vereinfachten Modells möglich, welches sich mit Hilfe von Particle-in-Cell Simulationen auf einem Computer simulieren lässt. Wir haben einen neuen und sauberen Setup entwickelt um die Entstehung eines Doppelschocks, bestehend aus einem vorwärts und einem rückwärts gerichtet Schock und einer Kontakt-Diskontinuität, durch die Kollision zweier gegeneinander strömender Plasmen, in welche ein Magnetfeld eingelagert werden kann, zu simulieren. In einer vorhergehenden Arbeit haben wir bereits die Prozesse an unmagnetisierten und an magnetisierten parallelen Schocks untersucht, weshalb wir in der vorliegenden Arbeit zu der Untersuchung magnetisierter senkrechter Schocks weiter gegangen sind. Aufgrund eines sehr viel stärkeren Einfangens der Teilchen in der Kollisionsregion, entwickelt sich der senkrechte Schock sehr viel schneller als der parallele Schock. Andererseits führt dies zu einer viel schwächeren Turbulenz. Wir finden Anzeichen für Schock-Surfing-Beschleunigung und Schock-Drift-Beschleunigung in beiden Schocks, welche Populationen von vorbeschleunigten Teilchen erzeugen, die wiederum als Ausgangspopulation für die Injektion in die diffusive Schock-Beschleunigung geeignet sind um zu noch höheren Energien beschleunigt zu werden. Wir beobachten die Entwicklung von Filamentstrukturen in der Schockrampe des vorwärts gerichteten Schocks, jedoch nicht im rückwärts gerichtet Schock. Dies führt zu der Schlussfolgerung, dass die Entwicklung dieser Strukturen in der Schockrampe von quasi-senkrechten kollisionsfreien Schocks nicht notwendigerweise durch die Existenz einer kritischen sonischen Machzahl bestimmt ist, sondern durch eine kritische Schock-Geschwindigkeit. Die Ergebnisse der Untersuchungen in dieser Dissertation können sich für weiterführende Untersuchungen von schrägen Schocks und für Untersuchungen mit Hilfe von hybriden oder magnetohydrodynamischen Simulationen als nützlich erweisen. Zusammen mit ausgefeilteren Beobachtungsmethoden helfen uns diese Untersuchungen dabei näher an eine Antwort auf die Frage zu kommen, wie Teilchen in Supernovaüberresten beschleunigt werden können um schließlich als kosmische Strahlung auf der Erde detektiert werden zu können. KW - cosmic rays KW - kosmische Strahlung KW - supernova remnants KW - Supernovaüberreste KW - particle-in-cell simulations Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-74532 ER - TY - THES A1 - Vlasov, Vladimir T1 - Synchronization of oscillatory networks in terms of global variables T1 - Synchronisation in Netzwerken von Oszillatoren via globaler Variabler N2 - Synchronization of large ensembles of oscillators is an omnipresent phenomenon observed in different fields of science like physics, engineering, life sciences, etc. The most simple setup is that of globally coupled phase oscillators, where all the oscillators contribute to a global field which acts on all oscillators. This formulation of the problem was pioneered by Winfree and Kuramoto. Such a setup gives a possibility for the analysis of these systems in terms of global variables. In this work we describe nontrivial collective dynamics in oscillator populations coupled via mean fields in terms of global variables. We consider problems which cannot be directly reduced to standard Kuramoto and Winfree models. In the first part of the thesis we adopt a method introduced by Watanabe and Strogatz. The main idea is that the system of identical oscillators of particular type can be described by a low-dimensional system of global equations. This approach enables us to perform a complete analytical analysis for a special but vast set of initial conditions. Furthermore, we show how the approach can be expanded for some nonidentical systems. We apply the Watanabe-Strogatz approach to arrays of Josephson junctions and systems of identical phase oscillators with leader-type coupling. In the next parts of the thesis we consider the self-consistent mean-field theory method that can be applied to general nonidentical globally coupled systems of oscillators both with or without noise. For considered systems a regime, where the global field rotates uniformly, is the most important one. With the help of this approach such solutions of the self-consistency equation for an arbitrary distribution of frequencies and coupling parameters can be found analytically in the parametric form, both for noise-free and noisy cases. We apply this method to deterministic Kuramoto-type model with generic coupling and an ensemble of spatially distributed oscillators with leader-type coupling. Furthermore, with the proposed self-consistent approach we fully characterize rotating wave solutions of noisy Kuramoto-type model with generic coupling and an ensemble of noisy oscillators with bi-harmonic coupling. Whenever possible, a complete analysis of global dynamics is performed and compared with direct numerical simulations of large populations. N2 - Die Synchronisation einer großen Menge von Oszillatoren ist ein omnipräsentes Phänomen, das in verschiedenen Forschungsgebieten wie Physik, Ingenieurwissenschaften, Medizin und Weiteren beobachtet wird. In der einfachsten Situation ist von einer Menge Phasenoszillatoren jeder mit dem Anderen gekoppelt und trägt zu einem gemeinsamen Feld (dem sogenannten mean field) bei, das auf alle Oszillatoren wirkt. Dieser Formulierung wurde von Winfree und Kuramoto der Weg bereitet und sie birgt die Möglichkeit einer Analyse des Systems mithilfe von globalen Variablen. In dieser Arbeit beschreiben wir mithilfe globaler Variablen die nicht-triviale kollektive Dynamik von Oszillatorpopulationen, welche mit einem mean field verbunden sind. Wir beschäftigen uns mit Problemen die nicht direkt auf die Standardmodelle von Kuramoto und Winfree reduziert werden können. Im ersten Teil der Arbeit verwenden wir eine Methode die auf Watanabe und Stro- gatz zurückgeht. Die Hauptidee ist, dass ein System von identischen Oszillatoren eines bestimmten Typs durch ein niedrig-dimensionales System von globalen Gleichungen beschrieben werden kann. Dieser Ansatz versetzt uns in die Lage eine vollständige analytische Untersuchung für eine spezielle jedoch große Menge an Anfangsbedingungen durchzuführen. Wir zeigen des Weiteren wie der Ansatz auf nicht-identische Systeme erweitert werden kann. Wir wenden die Methode von Watanabe und Strogatz auf Reihen von Josephson-Kontakten und auf identische Phasenoszillatoren mit einer Anführer-Kopplung an. Im nächsten Teil der Arbeit betrachten wir eine selbst-konsistente mean-field-Methode, die auf allgemeine nicht-identische global gekoppelte Phasenoszillatoren mit oder ohne Rauschen angewendet werden kann. Für die betrachteten Systeme gibt es ein Regime, in dem die globalen Felder gleichförmig rotieren. Dieses ist das wichtigste Regime. Es kann mithilfe unseres Ansatzes als Lösung einer Selbstkonsistenzgleichung für beliebige Verteilungen der Frequenzen oder Kopplungsstärken gefunden werden. Die Lösung liegt in einer analytischen, parametrischen Form sowohl für den Fall mit Rauschen, als auch für den Fall ohne Rauschen, vor. Die Methode wird auf ein deterministisches System der Kuramoto-Art mit generischer Kopplung und auf ein Ensemble von räumlich verteilten Oszillatoren mit Anführer-Kopplung angewendet. Zuletzt sind wir in der Lage, die Rotierende-Wellen-Lösungen der Kuramoto-artigen Modelle mit generischer Kopplung, sowie ein Ensemble von verrauschten Oszillatoren mit bi-harmonischer Kopplung, mithilfe des von uns vorgeschlagenen selbst-konsistenten Ansatzes vollständig zu charakterisieren. Wann immer es möglich war, wurde eine vollständige Untersuchung der globalen Dynamik durchgeführt und mit numerischen Ergebnissen von großen Populationen verglichen. KW - synchronization KW - Synchronisation KW - complex networks KW - komplexe Netzwerke KW - global description Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-78182 ER - TY - THES A1 - Sommerfeld, Anja T1 - Quantification of internal variability of the arctic summer atmosphere based on HIRHAM5 ensemble simulations T1 - Quantifizierung der modellinternen Variabilität der Arktischen Sommeratmosphäre basierend auf HIRHAM5 Ensemblesimulationen N2 - The non-linear behaviour of the atmospheric dynamics is not well understood and makes the evaluation and usage of regional climate models (RCMs) difficult. Due to these non-linearities, chaos and internal variability (IV) within the RCMs are induced, leading to a sensitivity of RCMs to their initial conditions (IC). The IV is the ability of RCMs to realise different solutions of simulations that differ in their IC, but have the same lower and lateral boundary conditions (LBC), hence can be defined as the across-member spread between the ensemble members. For the investigation of the IV and the dynamical and diabatic contributions generating the IV four ensembles of RCM simulations are performed with the atmospheric regional model HIRHAM5. The integration area is the Arctic and each ensemble consists of 20 members. The ensembles cover the time period from July to September for the years 2006, 2007, 2009 and 2012. The ensemble members have the same LBC and differ in their IC only. The different IC are arranged by an initialisation time that shifts successively by six hours. Within each ensemble the first simulation starts on 1st July at 00 UTC and the last simulation starts on 5th July at 18 UTC and each simulation runs until 30th September. The analysed time period ranges from 6th July to 30th September, the time period that is covered by all ensemble members. The model runs without any nudging to allow a free development of each simulation to get the full internal variability within the HIRHAM5. As a measure of the model generated IV, the across-member standard deviation and the across-member variance is used and the dynamical and diabatic processes influencing the IV are estimated by applying a diagnostic budget study for the IV tendency of the potential temperature developed by Nikiema and Laprise [2010] and Nikiema and Laprise [2011]. The diagnostic budget study is based on the first law of thermodynamics for potential temperature and the mass-continuity equation. The resulting budget equation reveals seven contributions to the potential temperature IV tendency. As a first study, this work analyses the IV within the HIRHAM5. Therefore, atmospheric circulation parameters and the potential temperature for all four ensemble years are investigated. Similar to previous studies, the IV fluctuates strongly in time. Further, due to the fact that all ensemble members are forced with the same LBC, the IV depends on the vertical level within the troposphere, with high values in the lower troposphere and at 500 hPa and low values in the upper troposphere and at the surface. By the same reason, the spatial distribution shows low values of IV at the boundaries of the model domain. The diagnostic budget study for the IV tendency of potential temperature reveals that the seven contributions fluctuate in time like the IV. However, the individual terms reach different absolute magnitudes. The budget study identifies the horizontal and vertical ‘baroclinic’ terms as the main contributors to the IV tendency, with the horizontal ‘baroclinic’ term producing and the vertical ‘baroclinic’ term reducing the IV. The other terms fluctuate around zero, because they are small in general or are balanced due to the domain average. The comparison of the results obtained for the four different ensembles (summers 2006, 2007, 2009 and 2012) reveals that on average the findings for each ensemble are quite similar concerning the magnitude and the general pattern of IV and its contributions. However, near the surface a weaker IV is produced with decreasing sea ice extent. This is caused by a smaller impact of the horizontal 'baroclinic' term over some regions and by the changing diabatic processes, particularly a more intense reducing tendency of the IV due to condensative heating. However, it has to be emphasised that the behaviour of the IV and its dynamical and diabatic contributions are influenced mainly by complex atmospheric feedbacks and large-scale processes and not by the sea ice distribution. Additionally, a comparison with a second RCM covering the Arctic and using the same LBCs and IC is performed. For both models very similar results concerning the IV and its dynamical and diabatic contributions are found. Hence, this investigation leads to the conclusion that the IV is a natural phenomenon and is independent from the applied RCM. N2 - Das nicht-lineare Verhalten der atmosphärischen Dynamik ist noch immer nicht ausreichend verstanden und daher sind die Evaluierung und die Anwendung von regionalen Klimamodellen (RCM) schwierig. Aufgrund dieser Nicht-Linearitäten wird Chaos und modellinterne Variabilität (IV) in RCMs erzeugt, was zur Sensitivität der RCMs bezüglich ihrer Anfangsbedingungen führt. Die IV ist die Fähigkeit von RCMs, verschiedene Lösungen für Simulationen zu erzeugen, die sich in ihren Anfangsbedingungen unterschieden, aber die gleichen unteren und seitlichen Randbedingungen aufweisen. Daher kann die IV als die Spannweite zwischen den Ensemblemitgliedern definiert werden. Für die Untersuchung der IV und deren dynamische und diabatische Beiträge werden vier Ensembles mit dem atmosphärischen Regionalmodell HIRHAM5 erzeugt. Das Integrationsgebiet ist die Arktis und jedes Ensemble besteht aus 20 Ensemblemitgliedern. Die Ensembles umfassen den Zeitraum von Juli bis September für die Jahre 2006, 2007, 2009 und 2012. Die Mitglieder eines Ensembles haben alle die gleichen unteren und seitlichen Randbedingungen und unterscheiden sich nur in ihren Anfangsbedingungen. Die unterschiedlichen Anfangsbedingungen werden durch eine Verschiebung der Initialisierungszeit um jeweils 6 Stunden erzeugt. Innerhalb eines jeden Ensembles wird die erste Simulation am 1. Juli um 00 UTC gestartet und die letzte Simulation beginnt am 5. Juli um 18 UTC. Jede Simulation endet am 30. September. Um gleich lange Simulationen für die Auswertung zu gewährleisten, wird die Studie für den Zeitraum vom 6. Juli bis 30. September durchgeführt. Das Modell wird ohne Nudging betrieben, um jeder Simulation eine freie Entwicklung zu gewähren und damit die modellinterne Variabilität des HIRHAM5 vollständig zu erhalten. Als Maβ für die im Modell generierte IV wird die Standardabweichung und die Varianz zwischen den Ensemblemitgliedern bestimmt. Die die IV beeinflussenden dynamischen und diabatischen Prozesse werden mit Hilfe der diagnostischen Budgetstudie zur Berechnung der IV Tendenz der potentiellen Temperatur bestimmt. Diese diagnostische Budgetstudie wurde von Nikiema and Laprise [2010] und Nikiema and Laprise [2011] entwickelt und basiert auf dem ersten Hauptsatz der Thermodynamik für die potentielle Temperatur und der Massenkontinuitätsgleichung. Aus der resultierenden Budgetgleichung können sieben Terme, die zu der Tendenz der potentiellen Temperatur beitragen, berechnet werden. In dieser Arbeit wird erstmalig die IV des HIRHAM5 analysiert. Dafür werden Parameter der atmosphärischen Zirkulation und die potentiellen Temperatur für alle vier Ensemblejahre analysiert. Wie auch frühere Studien zeigten, schwankt die IV stark mit der Zeit. Auβerdem wird eine vertikale Abhängigkeit der IV innerhalb der Troposphäre gefunden, mit hohen Werten in der unteren Troposphäre und in 500 hPa. Geringe Werte hingegen treten in der oberen Troposphäre und am Erdboden auf, da alle Ensemblemitglieder mit den gleichen Randbedingungen angetrieben werden. Daher zeigt auch die räumliche Verteilung niedrige IV Werte am Rand des Modellgebietes. Die diagnostische Budgetstudie für die IV Tendenz der potentiellen Temperatur verdeutlicht, dass die sieben Beiträge ebenfalls mit der Zeit schwanken wie die IV selbst. Jedoch erreichen die einzelnen Terme unterschiedliche Intensitäten. Mit Hilfe der Budgetstudie können der horizontale und vertikale 'Baroklinitätsterm' als die wichtigsten Beiträge zur Tendenz der IV ermittelt werden. Dabei trägt der horizontale 'Baroklinitätsterm' zur Produktion und der vertikale 'Baroklinitätsterm' zur Reduktion der IV bei. Die anderen Beiträge schwanken um Null, weil sie an sich klein oder aufgrund des Gebietsmittels ausbalanciert sind. Der Vergleich der Resultate für die Ensembles untereinander (Sommer 2006, 2007, 2009 und 2012) führt zu der Erkenntnis, das im Mittel die Ergebnisse für die IV und ihre Beiträge, die Gröβenordnung und die Muster betreffend, sehr ähnlich sind. Nur nahe der Erdoberfläche wird mit abnehmender Meereisausdehnung eine schwächere IV generiert. Dies ist bedingt durch einen geringeren Einfluss des horizontale 'Baroklinitätsterms' der in manchen Region auftritt sowie durch die sich ändernden diabatischen Prozesse (Tendenz zur intensiveren Reduktion der IV) aufgrund von Erwärmung durch Kondensation. Jedoch ist das Verhalten der IV und ihrer dynamischen und diabatischen Beiträge durch komplexe atmosphärische Rückkopplungen und groβskaligen Prozessen beeinflusst und nicht nur durch die Meereisverteilung. Des Weiteren wird ein Vergleich mit einem zweiten RCM durchgeführt. Dieses zweite RCM wird mit den selben unteren und seitlichen Randbedingungen und Anfangsbedingungen angetrieben wie das HIRHAM5. Für beide Modelle werden sehr ähnliche Ergebnisse für die IV und ihre dynamischen und diabatischen Beiträge gefunden. Daher führt die Untersuchung zu dem Schluss, dass die IV ein natürlichen Phänomen und damit unabhängig von dem verwendeten RCM ist. KW - internal variability KW - modellinterne Variabilitaet KW - regional climate model KW - regionales Klimamodell KW - ensemble simulations KW - Ensemblesimulationen KW - arctic KW - Arktis KW - budget study KW - Budgetstudie Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85347 ER - TY - THES A1 - Siegel, Daniel T1 - Binary neutron star mergers and short gamma-ray bursts BT - magnetohydrodynamics and electromagnetic emission Y1 - 2015 ER - TY - THES A1 - Sborikas, Martynas T1 - Preparation and characterization of acoustic electret and electromechanical properties of polypropylene ferroelectrets Y1 - 2015 ER - TY - THES A1 - Sauter, Tilman T1 - Function by structure BT - microstructural approaches to tailor surface, mechanical and shape-memory properties of porous polymer structures Y1 - 2015 ER - TY - THES A1 - Sauer, Tim-Oliver T1 - Quasi-condensation in low-dimensional Bose gases T1 - Quasi-Kondensation in niedrig-dimensionalen Bosegasen BT - mean-field theories and stochastic modelling BT - Molekularfeldtheorie und stochastische Modellierung N2 - The subject of the present thesis is the one-dimensional Bose gas. Since long-rang order is destroyed by infra-red fluctuations in one dimension, only the formation of a quasi-condensate is possible, which exhibits suppressed density fluctuations, but whose phase fluctuates strongly. It is shown that modified mean-field theories based on a symmetry-breaking approach can even characterise phase coherence properties of such a quasi-condensate properly. A correct description of the transition from the degenerate ideal Bose gas to the quasi-condensate, which is a smooth cross-over rather than a phase transition, is not possible though. Basic conditions for the applicability of the theories are not fulfilled in this regime, such that the existence of a critical point is predicted. The theories are compared on the basis of their excitation sprectum, equation of state, density fluctuations and related correlation functions. High-temperature expansions of the corresponding integrals are derived analytically for the numerical evaluation of the self-consistent integral equations. Apart from that, the Stochastic Gross-Pitaevskii equation (SGPE), a non-linear Langevin equation, is analysed numerically by means of Monte-Carlo simulations and the results are compared to those of the mean-field theories. In this context, a lot of attention is payed to the appropriate choice of the parameters. The simulations prove that the SGPE is capable of describing the cross-over properly, but highlight the limitations of the widely used local density approximation as well. N2 - Gegenstand der vorgelegten Arbeit ist das ein-dimensionale Bose-Gas. Da durch Infrarot-Fluktuationen langreichweitige Ordnung zerstört wird, kann sich in einer Dimension nur ein Quasi-Kondensat ausbilden, welches sich durch unterdrückte Dichte-Fluktuationen auszeichnet, dessen Phase jedoch stark fluktuiert. Es wird gezeigt, dass entsprechend angepasste Mean-field-Theorien, ausgehend von einem symmetriebrechenden Ansatz, in der Lage sind, auch Phasenkohärenzeigenschaften eines solchen Quasi-Kondensats richtig wiederzugeben. Eine Beschreibung des Übergangs vom entarteten idealen Bose-Gas zum Quasi-Kondensat, welcher kontinuierlich ist und damit keinen Phasenübergang sondern einen Cross-over darstellt, ist jedoch nicht möglich. Grundlegende Vorraussetzungen für die Anwendung der Theorien sind in diesem Regime nicht erfüllt, sodass falsche Aussagen wie die Existenz eines kritischen Punktes getroffen werden. Die Theorien werden anhand ihres Anregungsspektrums und ihrer Vorhersagen in Bezug auf die Zustandsgleichung, Dichte-Fluktuationen und damit in Beziehung stehenden Korrelationsfunktionen verglichen. Für die dafür notwendige numerische Auswertung der selbstkonsistenten Integralgleichungen werden Hochtemperaturentwicklungen der entsprechenden Integrale analytisch hergeleitet. Darüber hinaus wird die Stochastische Gross-Pitaevskii (SGP) Gleichung, eine nicht-lineare Langevin-Gleichung, numerisch mittels Monte-Carlo Simulationen analysiert und ihre Ergebnisse mit denen der Mean-field-Theorien verglichen. Dabei erfolgt eine intensive Auseinandersetzung mit der adäquaten Wahl der Parameter. Die Simulationen beweisen, dass die SGP Gleichung den Cross-over beschreiben kann, zeigen jedoch auch die Grenzen der oft verwendeten lokalen Dichte-Näherung auf. KW - Bose-Einstein Kondensation KW - Quasi-Kondensat KW - kritische Fluktuationen KW - Mean-field Theorie KW - Stochastische Gross-Pitaevskii Gleichung KW - Bogoliubov-Theorie KW - lokale Dichte-Näherung KW - Bosegas KW - Phasenübergang KW - Bose-Einstein condensation KW - quasi-condensate KW - critical fluctuations KW - mean-field theory KW - stochastic Gross-Pitaevskii equation KW - Bogoliubov theory KW - local density approximation KW - bose gas KW - phase transition Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-87247 ER - TY - THES A1 - Sander, Andreas Alexander Christoph T1 - Radiatively driven winds of hot stars BT - Coupling hydrodynamics with detailed non-LTE radiative transfer Y1 - 2015 ER - TY - JOUR A1 - Pulkkinen, Otto A1 - Metzler, Ralf T1 - Variance-corrected Michaelis-Menten equation predicts transient rates of single-enzyme reactions and response times in bacterial gene-regulation JF - Scientific reports N2 - Many chemical reactions in biological cells occur at very low concentrations of constituent molecules. Thus, transcriptional gene-regulation is often controlled by poorly expressed transcription-factors, such as E.coli lac repressor with few tens of copies. Here we study the effects of inherent concentration fluctuations of substrate-molecules on the seminal Michaelis-Menten scheme of biochemical reactions. We present a universal correction to the Michaelis-Menten equation for the reaction-rates. The relevance and validity of this correction for enzymatic reactions and intracellular gene-regulation is demonstrated. Our analytical theory and simulation results confirm that the proposed variance-corrected Michaelis-Menten equation predicts the rate of reactions with remarkable accuracy even in the presence of large non-equilibrium concentration fluctuations. The major advantage of our approach is that it involves only the mean and variance of the substrate-molecule concentration. Our theory is therefore accessible to experiments and not specific to the exact source of the concentration fluctuations. Y1 - 2015 U6 - https://doi.org/10.1038/srep17820 SN - 2045-2322 IS - 5 PB - Nature Publishing Group CY - London ER - TY - THES A1 - Prokhorov, Boris E. T1 - High-latitude coupling processes between thermospheric circulation and solar wind driven magnetospheric currents and plasma convection T1 - Kopplungsprozesse zwischen der thermosphärischen Zirkulation in hohen Breiten und den vom Sonnenwind getriebenen magnetosphärischen Strömen und der Plasmakonvektion N2 - The high-latitudinal thermospheric processes driven by the solar wind and Interplanetary Magnetic Field (IMF) interaction with the Earth magnetosphere are highly variable parts of the complex dynamic plasma environment, which represent the coupled Magnetosphere – Ionosphere – Thermosphere (MIT) system. The solar wind and IMF interactions transfer energy to the MIT system via reconnection processes at the magnetopause. The Field Aligned Currents (FACs) constitute the energetic links between the magnetosphere and the Earth ionosphere. The MIT system depends on the highly variable solar wind conditions, in particular on changes of the strength and orientation of the IMF. In my thesis, I perform an investigation on the physical background of the complex MIT system using the global physical - numerical, three-dimensional, time-dependent and self-consistent Upper Atmosphere Model (UAM). This model describes the thermosphere, ionosphere, plasmasphere and inner magnetosphere as well as the electrodynamics of the coupled MIT system for the altitudinal range from 80 (60) km up to the 15 Earth radii. In the present study, I developed and investigated several variants of the high-latitudinal electrodynamic coupling by including the IMF dependence of FACs into the UAM model. For testing, the various variants were applied to simulations of the coupled MIT system for different seasons, geomagnetic activities, various solar wind and IMF conditions. Additionally, these variants of the theoretical model with the IMF dependence were compared with global empirical models. The modelling results for the most important thermospheric parameters like neutral wind and mass density were compared with satellite measurements. The variants of the UAM model with IMF dependence show a good agreement with the satellite observations. In comparison with the empirical models, the improved variants of the UAM model reproduce a more realistic meso-scale structures and dynamics of the coupled MIT system than the empirical models, in particular at high latitudes. The new configurations of the UAM model with IMF dependence contribute to the improvement of space weather prediction. N2 - Die thermosphärischen Prozesse in hohen Breiten, die durch die Wechselwirkung des Sonnenwinds und des Interplanetaren Magnetfeldes (IMF) mit der Erdmagnetosphäre getrieben werden, stellen sich als stark veränderliches Geschehen in der komplexen dynamischen Plasmaumgebung der Erde dar, die das gekoppelte System der Magnetosphäre, Ionosphäre und Thermosphäre (MIT) umfaßt. Die Einflüsse des Sonnenwindes und des IMF zeigen sich als Energieübertragung in das MIT System mittels Rekonnektionsprozessen an der Magnetopause. Feldliniengerichtete Ströme (FACs) repräsentieren die energetische Kopplung zwischen der Magnetosphäre und der Ionosphäre der Erde. Das MIT System wird bestimmt durch die stark veränderlichen Sonnenwindbedingungen, insbesondere von der Stärke und Richtung des IMF. In meiner Promotionsschrift untersuche ich die physikalischen Bedingungen des komplexen MIT System mit Hilfe eines globalen physikalisch-numerischen, dreidimensionalen, zeitabhängigen und selbstkonsistenten Modells, dem Upper Atmosphere Model (UAM). Das UAM beschreibt das Verhalten der Thermosphäre, Ionosphäre, Plasmasphäre und der inneren Magnetosphäre in einem Höhenbereich zwischen 80 (60) km und 15 Erdradien sowie die elektrodynamische Verkopplung des gesamten MIT Systems. In der vorliegenden Arbeit habe ich mehrere Varianten der elektrodynamischen Kopplung in hohen Breiten entwickelt und analysiert, die die FACs innerhalb des UAM in ihrer Abhängigkeit vom IMF darstellen. Für Testzwecke wurden diese Varianten auf eine Reihe von numerischen Simulationen des gekoppelten MIT Systems unter verschiedenen Bedingungen hinsichtlich Jahreszeit, geomagnetischer Aktivität, Sonnenwind- und IMF-Parametern angewandt. Darüberhinaus wurden diese Varianten des IMF-abhängigen theoretischen Modells entsprechenden globalen empirischen Modellen gegenübergestellt. Modellergebnisse wurden außerdem mit einigen wichtigen von Satelliten gemessenen Thermosphärenparametern, wie dem Neutralwind und der Massendichte verglichen. Die UAM Modelvarianten mit IMF-Abhängigkeit zeigen eine gute Übereinstimmung mit den Satellitenbeobachtungen. Im Vergleich mit empirischen Modellaussagen geben die UAM Modellvarianten ein genaueres Bild der mesoskaligen Strukturen und der Dynamik des gekoppelten MIT Systems wieder, insbesondere für die hohen Breiten. Die neuen UAM Konfigurationen mit IMF-Abhängigkeit tragen damit zu verbesserten Möglichkeiten in der Weltraumwettervorhersage bei. KW - upper atmosphere model KW - high-latitudinal thermosphere KW - magnetosphere-ionosphere-thermosphere coupling KW - solar wind and interplanetary magnetic field influence KW - field aligned currents KW - Upper Atmosphere Model (UAM) KW - Thermosphäre hoher Breiten KW - Kopplung zwischen Magnetosphäre, Ionosphäre und Thermosphäre KW - Einfluß des Sonnenwindes und des interplanetaren magnetischen Feldes KW - feldlinengerichtete Ströme Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-92353 ER - TY - GEN A1 - Nöchel, Ulrich A1 - Reddy, Chaganti Srinivasa A1 - Wang, Ke A1 - Cui, Jing A1 - Zizak, Ivo A1 - Behl, Marc A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Nanostructural changes in crystallizable controlling units determine the temperature-memory of polymers N2 - Temperature-memory polymers remember the temperature, where they were deformed recently, enabled by broad thermal transitions. In this study, we explored a series of crosslinked poly[ethylene-co-(vinyl acetate)] networks (cPEVAs) comprising crystallizable polyethylene (PE) controlling units exhibiting a pronounced temperature-memory effect (TME) between 16 and 99 °C related to a broad melting transition (∼100 °C). The nanostructural changes in such cPEVAs during programming and activation of the TME were analyzed via in situ X-ray scattering and specific annealing experiments. Different contributions to the mechanism of memorizing high or low deformation temperatures (Tdeform) were observed in cPEVA, which can be associated to the average PE crystal sizes. At high deformation temperatures (>50 °C), newly formed PE crystals, which are established during cooling when fixing the temporary shape, dominated the TME mechanism. In contrast, at low Tdeform (<50 °C), corresponding to a cold drawing scenario, the deformation led preferably to a disruption of existing large crystals into smaller ones, which then fix the temporary shape upon cooling. The observed mechanism of memorizing a deformation temperature might enable the prediction of the TME behavior and the knowledge based design of other TMPs with crystallizable controlling units. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 194 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-81124 SP - 8284 EP - 8293 ER - TY - JOUR A1 - Nöchel, Ulrich A1 - Reddy, Chaganti Srinivasa A1 - Wang, Ke A1 - Cui, Jing A1 - Zizak, Ivo A1 - Behl, Marc A1 - Kratz, Karl A1 - Lendlein, Andreas T1 - Nanostructural changes in crystallizable controlling units determine the temperature-memory of polymers JF - Journal of Materials Chemistry A, Materials for energy and sustainability N2 - Temperature-memory polymers remember the temperature, where they were deformed recently, enabled by broad thermal transitions. In this study, we explored a series of crosslinked poly[ethylene-co-(vinyl acetate)] networks (cPEVAs) comprising crystallizable polyethylene (PE) controlling units exhibiting a pronounced temperature-memory effect (TME) between 16 and 99 °C related to a broad melting transition (∼100 °C). The nanostructural changes in such cPEVAs during programming and activation of the TME were analyzed via in situ X-ray scattering and specific annealing experiments. Different contributions to the mechanism of memorizing high or low deformation temperatures (Tdeform) were observed in cPEVA, which can be associated to the average PE crystal sizes. At high deformation temperatures (>50 °C), newly formed PE crystals, which are established during cooling when fixing the temporary shape, dominated the TME mechanism. In contrast, at low Tdeform (<50 °C), corresponding to a cold drawing scenario, the deformation led preferably to a disruption of existing large crystals into smaller ones, which then fix the temporary shape upon cooling. The observed mechanism of memorizing a deformation temperature might enable the prediction of the TME behavior and the knowledge based design of other TMPs with crystallizable controlling units. Y1 - 2015 U6 - https://doi.org/10.1039/c4ta06586g SN - 2050-7488 SN - 2050-7496 VL - 16 IS - 3 SP - 8284 EP - 8293 PB - Royal Society of Chemistry CY - Cambridge ER - TY - GEN A1 - Mitzscherling, Steffen A1 - Cui, Qianling A1 - Koopman, Wouter-Willem Adriaan A1 - Bargheer, Matias T1 - Dielectric function of two-phase colloid–polymer nanocomposite N2 - The plasmon resonance of metal nanoparticles determines their optical response in the visible spectral range. Many details such as the electronic properties of gold near the particle surface and the local environment of the particles influence the spectra. We show how the cheap but highly precise fabrication of composite nanolayers by spin-assisted layer-by-layer deposition of polyelectrolytes can be used to investigate the spectral response of gold nanospheres (GNS) and gold nanorods (GNR) in a self-consistent way, using the established Maxwell–Garnett effective medium (MGEM) theory beyond the limit of homogeneous media. We show that the dielectric function of gold nanoparticles differs from the bulk value and experimentally characterize the shape and the surrounding of the particles thoroughly by SEM, AFM and ellipsometry. Averaging the dielectric functions of the layered surrounding by an appropriate weighting with the electric field intensity yields excellent agreement for the spectra of several nanoparticles and nanorods with various cover-layer thicknesses. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 305 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102695 SP - 29465 EP - 29474 ER - TY - THES A1 - Mitzscherling, Steffen T1 - Polyelectrolyte multilayers for plasmonics and picosecond ultrasonics T1 - Multischichten aus Polyelektrolyten in der Pikosekundenakustik und Plasmonik N2 - This thesis investigates the application of polyelectrolyte multilayers in plasmonics and picosecond acoustics. The observed samples were fabricated by the spin-assisted layer-by-layer deposition technique that allowed a precise tuning of layer thickness in the range of few nanometers. The first field of interest deals with the interaction of light-induced localized surface plasmons (LSP) of rod-shaped gold nanoparticles with the particles' environment. The environment consists of an air phase and a phase of polyelectrolytes, whose ratio affects the spectral position of the LSP resonance. Measured UV-VIS spectra showed the shift of the LSP absorption peak as a function of the cover layer thickness of the particles. The data are modeled using an average dielectric function instead of the dielectric functions of air and polyelectrolytes. In addition using a measured dielectric function of the gold nanoparticles, the position of the LSP absorption peak could be simulated with good agreement to the data. The analytic model helps to understand the optical properties of metal nanoparticles in an inhomogeneous environment. The second part of this work discusses the applicability of PAzo/PAH and dye-doped PSS/PAH polyelectrolyte multilayers as transducers to generate hypersound pulses. The generated strain pulses were detected by time-domain Brillouin scattering (TDBS) using a pump-probe laser setup. Transducer layers made of polyelectrolytes were compared qualitatively to common aluminum transducers in terms of measured TDBS signal amplitude, degradation due to laser excitation, and sample preparation. The measurements proved that fast and easy prepared polyelectrolyte transducers provided stronger TDBS signals than the aluminum transducer. AFM topography measurements showed a degradation of the polyelectrolyte structures, especially for the PAzo/PAH sample. To quantify the induced strain, optical barriers were introduced to separate the transducer material from the medium of the hypersound propagation. Difficulties in the sample preparation prohibited a reliable quantification. But the experiments showed that a coating with transparent polyelectrolytes increases the efficiency of aluminum transducers and modifies the excited phonon distribution. The adoption of polyelectrolytes to the scientific field of picosecond acoustics enables a cheap and fast fabrication of transducer layers on most surfaces. In contrast to aluminum layers the polyelectrolytes are transparent over a wide spectral range. Thus, the strain modulation can be probed from surface and back. N2 - Diese Doktorarbeit behandelt die Verwendung von Multischichtsystemen aus Polyelektrolyten in den Fachgebieten der Plasmonik und der Pikosekunden-Akustik. Die verwendeten Proben wurden mit dem Spincoater-gestützten Layer-by-Layer-Verfahren hergestellt. Diese Methode ermöglichte die Einstellung Schichtdicke mit einer Präzision von wenigen Nanometern. Im Bereich der Plasmonik wurde die Wechselwirkung von Oberflächenplasmonen stabförmiger Gold-Nanopartikel mit deren Umgebung untersucht. Diese Umgebung bestand aus zwei Phasen: Polyelektrolyte und Luft. Das Volumenverhältnis der Materialien bestimmte die spektrale Position des Oberflächenplasmons. Bei zunehmender Einbettung der Goldpartikel zeigten die gemessenen UV-VIS Spektren eine Rotverschiebung der Plasmonenabsorption. Es wurde ein Modell entwickelt, das die inhomogene Umgebung der Partikel durch eine mittlere dieelekrische Funktion beschreibt. Nachdem die dielektrische Funktion der Goldpartikel in separaten Messungen bestimmt waren, konnte die Lage der Plasmonenabsorption berechnet werden. Die Berechnungen stimmten dabei mit den Messwerten überein. Mit diesem analytischen Modell ist es möglich, die optischen Eigenschaften von metallischen Nanopartikeln in einer inhomogenene Umgebung zu verstehen. Der zweite Teil dieser Arbeit diskutiert die Anwendbarkeit von polyelektrolytischen Multischichten aus PAzo/PAH bzw. Porphyrin-dotiertem PSS/PAH für die Erzeugung von Hyperschallpulsen. Die erzeugten Schallpulse wurden durch zeitaufgelöste Brillouin-Streuung in einem sogenannten pump-probe Aufbau detektiert. Schallerzeugende Schichten aus Polyelektrolyten wurden mit Wandlern aus Aluminium verglichen. Die Messungen zeigten, dass die Polyelektrolyte sehr gut für die Erzeugung von Schallpulsen geeignet sind. Der einfachen Probenpräparation und der guten Effizienz steht jedoch eine geringe Zerstörschwelle gegenüber. AFM-Messungen zeigten besonders bei den PAzo/PAH Multischichten sehr starke Veränderungen in der Struktur. Eine Quantisierung der induzierten Schallamplitude sollte durch eine optische Trennung von Wandler und Propagationmedium erreicht werden. Da die Trennschichten auch eine akustische Abkopplung bewirkten, ließen sich die Schallamplituden nicht bestimmen. Es wurde jedoch festgestellt, dass sich die Effizienz eines Aluminium-Wandlers durch das Aufbringen transparenter Polyelektrolytschichten deutlich steigern lässt. Die Herstellung von Ultraschall-Wandlern aus Polyelektrolyten erweitert die Möglichkeiten der Pikosekunden-Akustik. Zum einen können diese Wandler schnell und kostengünstig direkt auf fast jeder Oberfläche aufgebracht werden. Zum anderen sind Polyelektrolyte in einem breiten Spektralbereich transparent. Das ermöglicht Messungen von der Vorderseite, die bei herkömmlichen Aluminium-Wandlern nicht oder nur schwer realisierbar sind. KW - polyelectrolyte KW - plasmonics KW - picosecond acoustics KW - hypersound KW - nanoparticle KW - Polyelektrolyte KW - Pikosekundenakustik KW - Hyperschall KW - Plasmonik KW - Nanopartikel Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-80833 ER - TY - JOUR A1 - Metzler, Ralf A1 - Cherstvy, Andrey G. A1 - Chechkin, Aleksei V. A1 - Bodrova, Anna S. T1 - Ultraslow scaled Brownian motion JF - New journal of physics : the open-access journal for physics N2 - We define and study in detail utraslow scaled Brownian motion (USBM) characterized by a time dependent diffusion coefficient of the form . For unconfined motion the mean squared displacement (MSD) of USBM exhibits an ultraslow, logarithmic growth as function of time, in contrast to the conventional scaled Brownian motion. In a harmonic potential the MSD of USBM does not saturate but asymptotically decays inverse-proportionally to time, reflecting the highly non-stationary character of the process. We show that the process is weakly non-ergodic in the sense that the time averaged MSD does not converge to the regular MSD even at long times, and for unconfined motion combines a linear lag time dependence with a logarithmic term. The weakly non-ergodic behaviour is quantified in terms of the ergodicity breaking parameter. The USBM process is also shown to be ageing: observables of the system depend on the time gap between initiation of the test particle and start of the measurement of its motion. Our analytical results are shown to agree excellently with extensive computer simulations. KW - anomalous diffusion KW - stochastic processes KW - ageing Y1 - 2015 U6 - https://doi.org/10.1088/1367-2630/17/6/063038 SN - 1367-2630 VL - 17 IS - 063038 PB - Dt. Physikalische Ges., IOP CY - Bad Honnef, London ER - TY - GEN A1 - Metzler, Ralf A1 - Cherstvy, Andrey G. A1 - Chechkin, Aleksei V. A1 - Bodrova, Anna S. T1 - Ultraslow scaled Brownian motion T2 - New journal of physics : the open-access journal for physics N2 - We define and study in detail utraslow scaled Brownian motion (USBM) characterized by a time dependent diffusion coefficient of the form . For unconfined motion the mean squared displacement (MSD) of USBM exhibits an ultraslow, logarithmic growth as function of time, in contrast to the conventional scaled Brownian motion. In a harmonic potential the MSD of USBM does not saturate but asymptotically decays inverse-proportionally to time, reflecting the highly non-stationary character of the process. We show that the process is weakly non-ergodic in the sense that the time averaged MSD does not converge to the regular MSD even at long times, and for unconfined motion combines a linear lag time dependence with a logarithmic term. The weakly non-ergodic behaviour is quantified in terms of the ergodicity breaking parameter. The USBM process is also shown to be ageing: observables of the system depend on the time gap between initiation of the test particle and start of the measurement of its motion. Our analytical results are shown to agree excellently with extensive computer simulations. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 188 KW - anomalous diffusion KW - stochastic processes KW - ageing Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-78618 ER - TY - JOUR A1 - Metzler, Ralf A1 - Bauer, Maximilian A1 - Rasmussen, Emil S. A1 - Lomholt, Michael A. T1 - Real sequence effects on the search dynamics of transcription factors on DNA JF - Scientific Reports N2 - Recent experiments show that transcription factors (TFs) indeed use the facilitated diffusion mechanism to locate their target sequences on DNA in living bacteria cells: TFs alternate between sliding motion along DNA and relocation events through the cytoplasm. From simulations and theoretical analysis we study the TF-sliding motion for a large section of the DNA-sequence of a common E. coli strain, based on the two-state TF-model with a fast-sliding search state and a recognition state enabling target detection. For the probability to detect the target before dissociating from DNA the TF-search times self-consistently depend heavily on whether or not an auxiliary operator (an accessible sequence similar to the main operator) is present in the genome section. Importantly, within our model the extent to which the interconversion rates between search and recognition states depend on the underlying nucleotide sequence is varied. A moderate dependence maximises the capability to distinguish between the main operator and similar sequences. Moreover, these auxiliary operators serve as starting points for DNA looping with the main operator, yielding a spectrum of target detection times spanning several orders of magnitude. Auxiliary operators are shown to act as funnels facilitating target detection by TFs. KW - gene regulatory networks KW - biological physics Y1 - 2015 U6 - https://doi.org/10.1038/srep10072 SN - 2045-2322 VL - 5 IS - 10072 PB - Nature Publishing Group CY - London ER - TY - GEN A1 - Metzler, Ralf A1 - Bauer, Maximilian A1 - Rasmussen, Emil S. A1 - Lomholt, Michael A. T1 - Real sequence effects on the search dynamics of transcription factors on DNA N2 - Recent experiments show that transcription factors (TFs) indeed use the facilitated diffusion mechanism to locate their target sequences on DNA in living bacteria cells: TFs alternate between sliding motion along DNA and relocation events through the cytoplasm. From simulations and theoretical analysis we study the TF-sliding motion for a large section of the DNA-sequence of a common E. coli strain, based on the two-state TF-model with a fast-sliding search state and a recognition state enabling target detection. For the probability to detect the target before dissociating from DNA the TF-search times self-consistently depend heavily on whether or not an auxiliary operator (an accessible sequence similar to the main operator) is present in the genome section. Importantly, within our model the extent to which the interconversion rates between search and recognition states depend on the underlying nucleotide sequence is varied. A moderate dependence maximises the capability to distinguish between the main operator and similar sequences. Moreover, these auxiliary operators serve as starting points for DNA looping with the main operator, yielding a spectrum of target detection times spanning several orders of magnitude. Auxiliary operators are shown to act as funnels facilitating target detection by TFs. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 189 KW - gene regulatory networks KW - biological physics Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-79411 ER - TY - THES A1 - Matuschek, Hannes T1 - Applications of reproducing Kernel Hilbert spaces and their approximations Y1 - 2015 ER - TY - THES A1 - Maerten, Lena T1 - Spectroscopic perspectives on ultrafast coupling phenomena in perovskite oxides T1 - Spektroskopische Untersuchung ultraschneller Kopplungsphänomene in Perowskit-Oxiden N2 - In this thesis, I study ultrafast dynamics in perovskite oxides using time resolved broadband spectroscopy. I focus on the observation of coherent phonon propagation by time resolved Brillouin scattering: following the excition of metal transducer films with a femtosecond infrared pump pulse, coherent phonon dynamics in the GHz frequency range are triggered. Their propagation is monitored using a delayed white light probe pulse. The technique is illustrated on various thin films and multilayered samples. I apply the technique to investigate the linear and nonlinear acoustic response in bulk SrTiO_3, which displays a ferroelastic phase transition from a cubic to a tetragonal structural phase at T_a=105 K. In the linear regime, I observe a coupling of the observed acoustic phonon mode to the softening optic modes describing the phase transition. In the nonlinear regime, I find a giant slowing down of the sound velocity in the low temperature phase that is only observable for a strain amplitude exceeding the tetragonality of the material. It is attributed to a coupling of the high frequency phonons to ferroelastic domain walls in the material. I propose a new mechanism for the coupling of strain waves to the domain walls that is only effective for high amplitude strain. A detailed study of the phonon attenuation across a wide temperature range shows that the phonon attenuation at low temperatures is influenced by the domain configuration, which is determined by interface strain. Preliminary measurements on magnetic-ferroelectric multilayers reveal that the excitation fluence needs to be carefully controlled when dynamics at phase transitions are studied. N2 - In dieser Doktorarbeit untersuche ich ultraschnelle Dynamik in perovskitischen Oxiden mittels zeitaufgelöster optischer Spektroskopie. Der Schwerpunkt liegt dabei auf Phononendynamik, die mithilfe von zeitaufgelöster Brillouin-Streuung sichtbar gemacht wird: durch die Anregung einer metallischen Transducer-Schicht mit einem ultrakurzen Anregepuls wird eine kohärente Phononendynamik im GHz Frequenzbereich erzeugt. Die Ausbreitung der Schallpulse wird mit einem Weißlicht-Abfragepuls aufgezeichnet. Diese Methode wird am Beispiel verschiedener Dünnschicht- und Übergitterproben illustriert. Die Methode und das gewonnene Verständnis wende ich an, um lineare und nichtlineare akustische Eigenschaften an einem SrTiO_3-Kristall zu untersuchen. Dieser weist einen ferroelastischen Phasenübergang von kubischer zu tetragonaler Kristallstruktur bei T_a=105 K auf. Im linearen Regime beobachte ich eine Kopplung der untersuchten akustischen Mode an eine weichwerdende optische Mode, welche den Phasenübergang charakterisiert. Im nichtlinearen Regime tritt eine gigantische Verlangsamung der Schallgeschwindigkeit unterhalb von T_a auf, wenn die induzierte Gitterverzerrung die Tetragonalität des Materials übersteigt. Dies kann auf eine Kopplung der hochfrequenten akustischen Mode an ferroelastische Domänenwände bei tiefen Temperaturen zurückgeführt werden. Ich entwickle einen neuen Mechanismus, der die Kopplung der Verzerrungswelle an die Domänenwände beschreibt. Eine detaillierte Untersuchung der Phononendämpfung in SrTiO_3 über einen weiten Temperaturbereich zeigt, dass diese bei tiefen Temperaturen durch die Domänenkonfiguration beeinflusst ist. Die Domänenkonfiguration ist durch Verzerrungen an der Kristall-Transducer Grenzfläche bestimmt. Erste Untersuchungen an magnetisch-ferroelektrischen Übergittern zeigen, dass die Anregungsfluenz vorsichtig eingestellt werden muss, um die Dynamik an Phasenübergängen zu untersuchen. KW - coherent phonons KW - phonon dynamics KW - time resolved KW - Brillouin scattering KW - perovskite oxides KW - optical spectroscopy KW - hypersound propagation KW - phonon damping KW - domain wall motion KW - phonon backfolding KW - superlattice dispersion KW - kohärente Phononen KW - Phononen Dynamik KW - zeitaufgelöst KW - Brillouin Streuung KW - Perowskit-Oxide KW - optische Spektroskopie KW - Hyperschall Propagation KW - Phononen Dämpfung KW - Domänenwandbewegung KW - Phononen Rückfaltung KW - Übergitter Dispersion Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-77623 ER - TY - THES A1 - Kondic, Todor T1 - Hall-MHD Instabilities of Shear Flows in Neutron Stars Y1 - 2015 ER - TY - THES A1 - Kniepert, Juliane T1 - Correlation between dynamic parameters and device performance of organic solar cells T1 - Zusammenhang zwischen den dynamischen Größen und der Effizienz Organischer Solarzellen N2 - Organic bulk heterojunction (BHJ) solar cells based on polymer:fullerene blends are a promising alternative for a low-cost solar energy conversion. Despite significant improvements of the power conversion efficiency in recent years, the fundamental working principles of these devices are yet not fully understood. In general, the current output of organic solar cells is determined by the generation of free charge carriers upon light absorption and their transport to the electrodes in competition to the loss of charge carriers due to recombination. The object of this thesis is to provide a comprehensive understanding of the dynamic processes and physical parameters determining the performance. A new approach for analyzing the characteristic current-voltage output was developed comprising the experimental determination of the efficiencies of charge carrier generation, recombination and transport, combined with numerical device simulations. Central issues at the beginning of this work were the influence of an electric field on the free carrier generation process and the contribution of generation, recombination and transport to the current-voltage characteristics. An elegant way to directly measure the field dependence of the free carrier generation is the Time Delayed Collection Field (TDCF) method. In TDCF charge carriers are generated by a short laser pulse and subsequently extracted by a defined rectangular voltage pulse. A new setup was established with an improved time resolution compared to former reports in literature. It was found that charge generation is in general independent of the electric field, in contrast to the current view in literature and opposed to the expectations of the Braun-Onsager model that was commonly used to describe the charge generation process. Even in cases where the charge generation was found to be field-dependend, numerical modelling showed that this field-dependence is in general not capable to account for the voltage dependence of the photocurrent. This highlights the importance of efficient charge extraction in competition to non-geminate recombination, which is the second objective of the thesis. Therefore, two different techniques were combined to characterize the dynamics and efficiency of non-geminate recombination under device-relevant conditions. One new approach is to perform TDCF measurements with increasing delay between generation and extraction of charges. Thus, TDCF was used for the first time to measure charge carrier generation, recombination and transport with the same experimental setup. This excludes experimental errors due to different measurement and preparation conditions and demonstrates the strength of this technique. An analytic model for the description of TDCF transients was developed and revealed the experimental conditions for which reliable results can be obtained. In particular, it turned out that the $RC$ time of the setup which is mainly given by the sample geometry has a significant influence on the shape of the transients which has to be considered for correct data analysis. Secondly, a complementary method was applied to characterize charge carrier recombination under steady state bias and illumination, i.e. under realistic operating conditions. This approach relies on the precise determination of the steady state carrier densities established in the active layer. It turned out that current techniques were not sufficient to measure carrier densities with the necessary accuracy. Therefore, a new technique {Bias Assisted Charge Extraction} (BACE) was developed. Here, the charge carriers photogenerated under steady state illumination are extracted by applying a high reverse bias. The accelerated extraction compared to conventional charge extraction minimizes losses through non-geminate recombination and trapping during extraction. By performing numerical device simulations under steady state, conditions were established under which quantitative information on the dynamics can be retrieved from BACE measurements. The applied experimental techniques allowed to sensitively analyse and quantify geminate and non-geminate recombination losses along with charge transport in organic solar cells. A full analysis was exemplarily demonstrated for two prominent polymer-fullerene blends. The model system P3HT:PCBM spincast from chloroform (as prepared) exhibits poor power conversion efficiencies (PCE) on the order of 0.5%, mainly caused by low fill factors (FF) and currents. It could be shown that the performance of these devices is limited by the hole transport and large bimolecular recombination (BMR) losses, while geminate recombination losses are insignificant. The low polymer crystallinity and poor interconnection between the polymer and fullerene domains leads to a hole mobility of the order of 10^-7 cm^2/Vs which is several orders of magnitude lower than the electron mobility in these devices. The concomitant build up of space charge hinders extraction of both electrons and holes and promotes bimolecular recombination losses. Thermal annealing of P3HT:PCBM blends directly after spin coating improves crystallinity and interconnection of the polymer and the fullerene phase and results in comparatively high electron and hole mobilities in the order of 10^-3 cm^2/Vs and 10^-4 cm^2/Vs, respectively. In addition, a coarsening of the domain sizes leads to a reduction of the BMR by one order of magnitude. High charge carrier mobilities and low recombination losses result in comparatively high FF (>65%) and short circuit current (J_SC ≈ 10 mA/cm^2). The overall device performance (PCE ≈ 4%) is only limited by a rather low spectral overlap of absorption and solar emission and a small V_OC, given by the energetics of the P3HT. From this point of view the combination of the low bandgap polymer PTB7 with PCBM is a promising approach. In BHJ solar cells, this polymer leads to a higher V_OC due to optimized energetics with PCBM. However, the J_SC in these (unoptimized) devices is similar to the J_SC in the optimized blend with P3HT and the FF is rather low (≈ 50%). It turned out that the unoptimized PTB7:PCBM blends suffer from high BMR, a low electron mobility of the order of 10^-5 cm^2/Vs and geminate recombination losses due to field dependent charge carrier generation. The use of the solvent additive DIO optimizes the blend morphology, mainly by suppressing the formation of very large fullerene domains and by forming a more uniform structure of well interconnected donor and acceptor domains of the order of a few nanometers. Our analysis shows that this results in an increase of the electron mobility by about one order of magnitude (3 x 10^-4 cm^2/Vs), while BMR and geminate recombination losses are significantly reduced. In total these effects improve the J_SC (≈ 17 mA/cm^2) and the FF (> 70%). In 2012 this polymer/fullerene combination resulted in a record PCE for a single junction OSC of 9.2%. Remarkably, the numerical device simulations revealed that the specific shape of the J-V characteristics depends very sensitively to the variation of not only one, but all dynamic parameters. On the one hand this proves that the experimentally determined parameters, if leading to a good match between simulated and measured J-V curves, are realistic and reliable. On the other hand it also emphasizes the importance to consider all involved dynamic quantities, namely charge carrier generation, geminate and non-geminate recombination as well as electron and hole mobilities. The measurement or investigation of only a subset of these parameters as frequently found in literature will lead to an incomplete picture and possibly to misleading conclusions. Importantly, the comparison of the numerical device simulation employing the measured parameters and the experimental $J-V$ characteristics allows to identify loss channels and limitations of OSC. For example, it turned out that inefficient extraction of charge carriers is a criticical limitation factor that is often disobeyed. However, efficient and fast transport of charges becomes more and more important with the development of new low bandgap materials with very high internal quantum efficiencies. Likewise, due to moderate charge carrier mobilities, the active layer thicknesses of current high-performance devices are usually limited to around 100 nm. However, larger layer thicknesses would be more favourable with respect to higher current output and robustness of production. Newly designed donor materials should therefore at best show a high tendency to form crystalline structures, as observed in P3HT, combined with the optimized energetics and quantum efficiency of, for example, PTB7. N2 - Organische Solarzellen aus Polymer-Fulleren Mischschichten sind eine vielversprechende Alternative für eine kostengünstige Quelle erneuerbarer Energien. Jedoch sind trotz intensiver Forschung und bedeutenden Verbesserungen der Effizienzen während der letzten Jahre, die fundamentalen Prozesse in diesen Solarzellen noch immer nicht vollständig verstanden. Im Allgemeinen wird der Photostrom in organischen Solarzellen durch die Generation freier Ladungsträger nach Absorption von Licht und dem anschliessenden Transport dieser Ladungsträger zu den Elektroden bestimmt, wobei ein Teil durch Rekombination verloren geht. Das Ziel dieser Dissertation ist es, zu einem umfassenden Verständnis aller dynamischen Prozesse und relevanten physikalischen Parameter und deren Zusammenhang mit der Solarzelleneffizienz beizutragen. Dabei wurde eine neue Herangehensweise zur Analyse der Strom-Spannungskennlinien entwickelt, die auf der experimentellen Bestimmung von Ladungsträgergeneration, Rekombination und Transport im Vergleich mit numerischen Simulationen beruht. Die zentralen Fragestellungen zu Beginn der Arbeit waren, in welchem Masse die Ladungsträgergeneration von der Stärke des elektrischen Feldes abhängt und in wie weit die einzelnen Prozesse Generation, Rekombination und Transport zum charakteristischen Verlauf der Strom-Spannungskennlinie beitragen. Eine elegante Methode um direkt die Feldabhängigkeit der Ladungsträgergeneration zu bestimmen, ist die Time Delayed Collection Field (TDCF) Methode. Dabei werden in der Solarzelle Ladungsträger mit einem kurzen Laserpuls erzeugt und anschliessend mit einem wohldefinierten rechteckigen Spannungspuls extrahiert. Im Rahmen dieser Arbeit wurde ein neuer Versuchsaufbau mit stark verbesserter Zeitauflösung im Vergleich zu vorangegangenen Arbeiten aufgebaut. Es hat sich gezeigt, dass die Generation im Allgemeinen nicht vom elektrischen Feld abhängt. Dies steht im Widerspruch zu dem in der Literatur häufig verwendeten Braun-Onsager Modell zur Beschreibung der Ladungsgeneration. Selbst in Fällen, in denen eine feldabhängige Generation gemessen wurde, reichte diese im Allgemeinen nicht aus, um die Spannungsabhängigkeit des Photostroms in diesen Zellen zu erklären. Dies führt zu der zunehmenden Bedeutung einer effizienten Ladungsextraktion in Konkurrenz zur nicht-geminalen Rekombination, welche die zweite wichtige Fragestellung in dieser Arbeit war. Dazu wurden zwei neue Herangehensweisen zur Messung der Rekombinationsdynamik unter Solarzellen-relevanten Messbedingungen erarbeitet. Zum Einen wurde zum ersten Mal TDCF zur Messung von Rekombination und Transport verwendet. Der Vorteil ist, dass die Messung aller drei relevanten Prozesse in einem Versuchsaufbau zu einer höheren Genauigkeit führt, da experimentelle Fehler durch unterschiedliche Probenpräparation und Messbedingungen ausgeschlossen werden können. Es wurde ein analytisches Modell zur Beschreibung der TDCF Transienten entwickelt, welches direkt Rückschlüsse auf die notwendigen Messbedingungen erlaubt, unter denen zuverlässige Ergebnisse erzielt werden können. Insbesondere hat sich dabei gezeigt, dass die RC-Zeit des Aufbaus, die hauptsächlich durch die Probengeometrie bestimmt wird, einen wesentlichen Einfluss auf die Transienten hat, welcher in der Datenauswertung nicht vernachlässigt werden darf. Zum Anderen wurde eine komplementäre Methode zur Messung der Rekombination im Gleichgewicht benutzt, die auf der genauen Bestimmung der statischen Ladungsträgerdichte unter Beleuchtung basiert. Es zeigte sich, dass die in der Literatur etablierten Methoden zur Ladungsträgerbestimmung nicht ausreichend genau waren. Daher wurde eine neue, sensitive Technik entwickelt, die Bias Assisted Charge Extraction (BACE) Methode. Dabei werden die unter kontinuierlicher Beleuchtung generierten Ladungsträger mit einem hohen angelegten elektrischen Feld extrahiert. Dies führt zu einer beschleunigten Extraktion im Vergleich zur konventionellen Charge Extraction Methode, welche die Verluste durch Rekombination und Trapping deutlich reduziert. Mit Hilfe von numerischen Simulationen wurden Bedingungen festgelegt, unter denen zuverlässige Messungen mit BACE möglich sind. Mit den vorgestellten Methoden können alle relevanten Parameter für Generation, Rekombination und Transport experimentell sehr genau bestimmt und analysiert werden. Dies wurde exemplarisch für zwei in der Literatur bedeutende Materialsysteme durchgeführt. Das Modellsystem P3HT:PCBM, hergestellt aus dem Lösungsmittel Chloroform, weist direkt nach der Präparation nur sehr niedrige Effizienzen im Bereich von 0.5% auf, die vor allem durch niedrige Ströme und Füllfaktoren (FF) gekennzeichnet sind. Es konnte gezeigt werden, dass die Effizienz dieser Zellen durch den sehr langsamen Lochtransport und die starke bimolekulare Rekombination begrenzt wird, während Verluste durch geminale Rekombination eher unbedeutend sind. Eine geringe Kristallinität des Polymers und schlechte Verbindungen zwischen den Polymerdomänen führt zu einer Lochmobilität von nur 10^7 cm^2/Vs. Diese ist mehrere Grössenordnungen kleiner als die Elektronenmobilität in diesen Zellen, was den Aufbau von Raumladungen zur Folge hat und damit die Extraktion von beiden Ladungsträgern behindert und bimolekulare Rekombination begünstigt. Die thermische Behandlung der P3HT:PCBM Proben direkt nach dem Spin Coating verbessert sowohl die Kristallinität als auch die Vernetzung der Polymer- und Fullerenphasen. Dies führt zu vergleichsweise hohen Mobilitäten für Elektronen (10^3 cm^2/Vs) und Löcher (10^4 cm^2/Vs). Zusätzlich reduziert eine Vergrösserung der Domänenstruktur die bimolekulare Rekombination um eine Grössenordnung. Die hohen Mobilitäten und niedrigen Rekombinationverluste resultieren in vergleichsweise hohen FF (> 65%) und Strömen (J_SC ≈ 10 mA/cm^2). Die Effizienz (≈ 4%) wird dabei nur durch den eher geringen spektralen Überlapp zwischen Absorptions- und Sonnenemissionsspektrum begrenzt und einer geringen Leerlaufspannung (V_OC), verursacht durch die ungünstige Energetik des P3HT. Aus dieser Perspektive ist die Kombination des Low-Bandgap Polymers PTB7 mit dem Fullerenderivat PCBM ein vielversprechender Ansatz. Aufgrund der angepassten Energetik führt diese Kombination in Mischschichtsolarzellen zu einer höheren V_OC. Jedoch ist der Kurzschlussstrom (J_SC) in den unoptimierten Zellen gegenüber dem der optimierten P3HT:PCBM Zellen nicht erhöht und die FF sind niedrig (≈ 50%). Die Untersuchungen ergaben, dass die Dynamik in den unoptimierten PTB7:PCBM Zellen durch hohe bimolekulare Rekombination (BMR), eine niedrige Elektronenmobilität im Bereich von 10^5 cm^2/Vs und nicht-geminalen Rekombinationsverslusten aufgrund einer feldabhängigen Generation geprägt ist. Die Zugabe des Lösungsmitteladditivs DIO bei der Probenpräparation optimiert die Morphologie in der Schicht. Dabei wird hauptsächlich die Formation von sehr grossen Fullerendomänen unterdrückt und eine gleichmässige Struktur von gut vernetzten, nanometergrossen Donor- und Akzeptordomänen ausgebildet. Unsere Analyse zeigt, dass dadurch die Elektronenmobilität um ca eine Grössenordnung erhöht wird (auf 3 x 10^4 cm^2/Vs), während BMR und geminale Rekombination deutlich unterdrückt werden. Zusammen genommen verbessern diese Effekte sowohl den J_SC (≈ 17 mA/cm^2) als auch den FF (> 70%). Im Jahr 2012 führten die optimierten PTB7:PCBM Solarzellen damit zu einer Rekordeffizienz für organische Solarzellen von 9.2%. Von grösserer Bedeutung ist jedoch, dass der Vergleich zwischen den gemessenen und simulierten Strom-Spannungskennlinien, mit experimentell bestimmten Eingangsparametern, Rückschlüsse auf die entsprechenden Verlustkanäle in den jeweiligen Solarzellen erlaubt. Hierbei zeigte sich, dass die effiziente Extraktion von Ladungsträgern ein kritischer Faktor ist, der in der Literatur oft unterschätzt wird. Der effiziente und schnelle Transport von Ladungen wird aber gerade im Hinblick auf neue Low-Bandgap Materialien mit sehr hohen internen Quanteneffizienzen immer wichtiger. Moderate Mobilitäten limitieren die möglichen Schichtdicken auf ca 100 nm. Grössere Schichtdicken wären jedoch vorteilhafter im Hinblick auf höhere Ausgangsströme und der Robustheit des Produktionsprozesses. Neu entwickelte Donormaterialien sollten daher sowohl möglichst kristalline Strukturen ausbilden mit einhergehenden hohen Mobilitäten, wie beim P3HT, als auch optimierte Energieniveaus und Quanteneffizienzen aufweisen, wie beispielsweise PTB7. KW - organic solar cells KW - optoelectronic measurements KW - transient methods KW - numeric device simulations KW - organische Solarzellen KW - optoelektronische Messungen KW - transiente Messmethoden KW - numerische Bauteilsimulationen Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-90087 ER - TY - THES A1 - Kappel, David T1 - Multi-spectrum retrieval of maps of Venus' surface emissivity in the infrared T1 - Multispektrum-Retrieval von Karten der Oberflächenemissivität der Venus im Infrarotbereich N2 - The main goal of this cumulative thesis is the derivation of surface emissivity data in the infrared from radiance measurements of Venus. Since these data are diagnostic of the chemical composition and grain size of the surface material, they can help to improve knowledge of the planet’s geology. Spectrally resolved images of nightside emissions in the range 1.0-5.1 μm were recently acquired by the InfraRed Mapping channel of the Visible and InfraRed Thermal Imaging Spectrometer (VIRTIS-M-IR) aboard ESA’s Venus EXpress (VEX). Surface and deep atmospheric thermal emissions in this spectral range are strongly obscured by the extremely opaque atmosphere, but three narrow spectral windows at 1.02, 1.10, and 1.18 μm allow the sounding of the surface. Additional windows between 1.3 and 2.6 μm provide information on atmospheric parameters that is required to interpret the surface signals. Quantitative data on surface and atmosphere can be retrieved from the measured spectra by comparing them to simulated spectra. A numerical radiative transfer model is used in this work to simulate the observable radiation as a function of atmospheric, surface, and instrumental parameters. It is a line-by-line model taking into account thermal emissions by surface and atmosphere as well as absorption and multiple scattering by gases and clouds. The VIRTIS-M-IR measurements are first preprocessed to obtain an optimal data basis for the subsequent steps. In this process, a detailed detector responsivity analysis enables the optimization of the data consistency. The measurement data have a relatively low spectral information content, and different parameter vectors can describe the same measured spectrum equally well. A usual method to regularize the retrieval of the wanted parameters from a measured spectrum is to take into account a priori mean values and standard deviations of the parameters to be retrieved. This decreases the probability to obtain unreasonable parameter values. The multi-spectrum retrieval algorithm MSR is developed to additionally consider physically realistic spatial and temporal a priori correlations between retrieval parameters describing different measurements. Neglecting geologic activity, MSR also allows the retrieval of an emissivity map as a parameter vector that is common to several spectrally resolved images that cover the same surface target. Even applying MSR, it is difficult to obtain reliable emissivity maps in absolute values. A detailed retrieval error analysis based on synthetic spectra reveals that this is mainly due to interferences from parameters that cannot be derived from the spectra themselves, but that have to be set to assumed values to enable the radiative transfer simulations. The MSR retrieval of emissivity maps relative to a fixed emissivity is shown to effectively avoid most emissivity retrieval errors. Relative emissivity maps at 1.02, 1.10, and 1.18 μm are finally derived from many VIRTIS-M-IR measurements that cover a surface target at Themis Regio. They are interpreted as spatial variations relative to an assumed emissivity mean of the target. It is verified that the maps are largely independent of the choice of many interfering parameters as well as the utilized measurement data set. These are the first Venus IR emissivity data maps based on a consistent application of a full radiative transfer simulation and a retrieval algorithm that respects a priori information. The maps are sufficiently reliable for future geologic interpretations. N2 - Das Hauptziel dieser publikationsbasierten Dissertation ist die Ableitung von Oberflächenemissivitäts-Daten im Infraroten aus Radianzmessungen der Venus. Da diese Daten diagnostisch bezüglich chemischer Zusammensetzung und Korngröße des Oberflächenmaterials sind, können sie zur Erweiterung des Wissens über die Geologie des Planeten beitragen. Spektral aufgelöste Bilder von nachtseitigen Emissionen im Bereich 1.0-5.1 µm wurden kürzlich durch den Infrarot-Kartierungskanal des Abbildenden Spektrometers im Sichtbaren und Infraroten Bereich (VIRTIS-M-IR) an Bord der ESA-Sonde Venus Express (VEX) gewonnen. Die thermischen Emissionen der Oberfläche sowie der tiefen Atmosphäre werden in diesem Spektralbereich stark durch die extrem licht-undurchlässige Atmosphäre verschleiert, aber drei schmale spektrale Fenster bei 1.02, 1.10 und 1.18 µm ermöglichen die Sondierung der Oberfläche. Weitere Fenster zwischen 1.3 und 2.6 µm liefern Informationen über atmosphärische Parameter, die benötigt werden, um die Oberflächensignale zu interpretieren. Quantitative Daten von Oberfläche und Atmosphäre können von den gemessenen Spektren durch Vergleiche mit simulierten Spektren abgeleitet werden. In dieser Arbeit wird ein numerisches Strahlungstransportmodell verwendet, um die beobachtbare Strahlung als Funktion von Atmosphären-, Oberflächen-, und Instrumentenparametern zu simulieren. Es ist ein Linie-für-Linie-Modell und berücksichtigt sowohl thermische Emissionen der Oberfläche und Atmosphäre, als auch Absorption und Mehrfachstreuung durch Gase und Wolken. Die VIRTIS-M-IR-Messungen werden zunächst vorverarbeitet, um eine optimale Datenbasis für die nachfolgenden Schritte zu erhalten. Eine detaillierte Analyse des Detektoransprechvermögens ermöglicht dabei die Optimierung der Datenkonsistenz. Die Messdaten haben einen vergleichsweise geringen spektralen Informationsgehalt, und verschiedene Parametervektoren können ein- und dasselbe gemessene Spektrum gleich gut beschreiben. Eine übliche Maßnahme, das Retrieval der gesuchten Parameter aus einem gemessenem Spektrum zu regularisieren, ist die Berücksichtigung von a-priori-Mittelwerten und -Standardabweichungen der zu bestimmenden Parameter. Dadurch wird die Wahrscheinlichkeit verringert, unrealistische Parameterwerte zu erhalten. Es wird der Multispektrum-Retrieval-Algorithmus MSR entwickelt, um zusätzlich physikalisch realistische räumliche und zeitliche a-priori-Korrelationen zwischen Retrievalparametern, die verschiedene Messungen beschreiben, berücksichtigen zu können. Vernachlässigt man geologische Aktivität, kann mittels MSR auch eine Emissivitätskarte in Form eines Parametervektors bestimmt werden, der verschiedenen spektral aufgelösten, denselben Oberflächenbereich überdeckenden Bildern gemeinsam ist. Selbst bei Anwendung von MSR ist es schwierig, verlässliche Karten für die Absolutwerte der Emissivität zu erhalten. Eine detaillierte Retrieval-Fehleranalyse, die auf synthetischen Spektren beruht, zeigt, dass dies hauptsächlich an Interferenzen von Parametern liegt, die nicht aus den Spektren selbst hergeleitet werden können. Um dennoch die Strahlungstransportsimulationen zu ermöglichen, müssen diese Parameter auf angenommene Werte gesetzt werden. Es wird nachgewiesen, dass durch ein MSR-Retrieval von Emissivitätskarten relativ zu einer festen Emissivität die meisten Fehler bei der Emissivitätsbestimmung effizient vermieden werden können. Abschließend werden relative Emissivitätskarten bei 1.02, 1.10 und 1.18 µm aus vielen VIRTIS-M-IR-Messungen bestimmt, die einen Oberflächenbereich in der Themis Regio überdecken. Diese Karten werden als räumliche Variationen relativ zu einer angenommenen mittleren Emissivität des Oberflächenbereichs interpretiert. Es wird nachgewiesen, dass die Karten von der Wahl vieler interferierender Parameter sowie von der Auswahl der zugrunde liegenden Messungen weitgehend unabhängig sind. Dieses sind die ersten Karten von Emissivitätsdaten der Venus im Infrarotbereich auf Basis der konsistenten Anwendung einer umfassenden Strahlungstransportsimulation und eines Retrievalalgorithmus, der a priori Informationen berücksichtigt. Die Karten sind hinreichend zuverlässig für zukünftige geologische Interpretationen. KW - Venus Express KW - VIRTIS KW - surface emissivity KW - infrared KW - radiative transfer KW - retrieval KW - multi-spectrum regularization KW - Venus Express KW - VIRTIS KW - Oberflächenemissivität KW - Infrarot KW - Strahlungstransport KW - Retrieval KW - Multi-Spektrum-Regularisierung Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-85301 ER - TY - THES A1 - Holländer, Lars T1 - Einfluss der remanenten Polarisation auf die optischen Transmissionseingenschaften eines ferroelektrischen Polymers mit nematischen Flüssigkristalleinschlüssen Y1 - 2015 ER - TY - THES A1 - Hainich, Rainer T1 - The Wolf-Rayet stars of the nitrogen sequence in environments of different metallicities Y1 - 2015 ER - TY - JOUR A1 - Goychuk, Igor A1 - Goychuk, Andriy T1 - Stochastic Wilson BT - Cowan models of neuronal network dynamics with memory and delay JF - New journal of physics N2 - We consider a simple Markovian class of the stochastic Wilson–Cowan type models of neuronal network dynamics, which incorporates stochastic delay caused by the existence of a refractory period of neurons. From the point of view of the dynamics of the individual elements, we are dealing with a network of non-Markovian stochastic two-state oscillators with memory, which are coupled globally in a mean-field fashion. This interrelation of a higher-dimensional Markovian and lower-dimensional non-Markovian dynamics is discussed in its relevance to the general problem of the network dynamics of complex elements possessing memory. The simplest model of this class is provided by a three-state Markovian neuron with one refractory state, which causes firing delay with an exponentially decaying memory within the two-state reduced model. This basic model is used to study critical avalanche dynamics (the noise sustained criticality) in a balanced feedforward network consisting of the excitatory and inhibitory neurons. Such avalanches emerge due to the network size dependent noise (mesoscopic noise). Numerical simulations reveal an intermediate power law in the distribution of avalanche sizes with the critical exponent around −1.16. We show that this power law is robust upon a variation of the refractory time over several orders of magnitude. However, the avalanche time distribution is biexponential. It does not reflect any genuine power law dependence. KW - neuronal networks KW - stochastic models KW - memory and delay KW - critical avalanche dynamics Y1 - 2015 U6 - https://doi.org/10.1088/1367-2630/17/4/045029 SN - 1367-2630 VL - 17 IS - 4 PB - Deutsche Physikalische Gesellschaft, Institute of Physics CY - Bad Honnef, London ER - TY - GEN A1 - Goychuk, Igor A1 - Goychuk, Andriy T1 - Stochastic Wilson BT - Cowan models of neuronal network dynamics with memory and delay N2 - We consider a simple Markovian class of the stochastic Wilson–Cowan type models of neuronal network dynamics, which incorporates stochastic delay caused by the existence of a refractory period of neurons. From the point of view of the dynamics of the individual elements, we are dealing with a network of non-Markovian stochastic two-state oscillators with memory, which are coupled globally in a mean-field fashion. This interrelation of a higher-dimensional Markovian and lower-dimensional non-Markovian dynamics is discussed in its relevance to the general problem of the network dynamics of complex elements possessing memory. The simplest model of this class is provided by a three-state Markovian neuron with one refractory state, which causes firing delay with an exponentially decaying memory within the two-state reduced model. This basic model is used to study critical avalanche dynamics (the noise sustained criticality) in a balanced feedforward network consisting of the excitatory and inhibitory neurons. Such avalanches emerge due to the network size dependent noise (mesoscopic noise). Numerical simulations reveal an intermediate power law in the distribution of avalanche sizes with the critical exponent around −1.16. We show that this power law is robust upon a variation of the refractory time over several orders of magnitude. However, the avalanche time distribution is biexponential. It does not reflect any genuine power law dependence. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 187 KW - neuronal networks KW - stochastic models KW - memory and delay KW - critical avalanche dynamics Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-77814 ER - TY - THES A1 - Ermilova, Elena T1 - Breitbandige dielektrische Charakterisierung biologisch relevanter Polymere Y1 - 2015 ER - TY - THES A1 - Dunlop, John William Chapman T1 - The physics of shape changes in biology T1 - Die Physik von Formveränderungen in der Biologie N2 - Biological materials, in addition to having remarkable physical properties, can also change shape and volume. These shape and volume changes allow organisms to form new tissue during growth and morphogenesis, as well as to repair and remodel old tissues. In addition shape or volume changes in an existing tissue can lead to useful motion or force generation (actuation) that may even still function in the dead organism, such as in the well known example of the hygroscopic opening or closing behaviour of the pine cone. Both growth and actuation of tissues are mediated, in addition to biochemical factors, by the physical constraints of the surrounding environment and the architecture of the underlying tissue. This habilitation thesis describes biophysical studies carried out over the past years on growth and swelling mediated shape changes in biological systems. These studies use a combination of theoretical and experimental tools to attempt to elucidate the physical mechanisms governing geometry controlled tissue growth and geometry constrained tissue swelling. It is hoped that in addition to helping understand fundamental processes of growth and morphogenesis, ideas stemming from such studies can also be used to design new materials for medicine and robotics. N2 - Biologische Materialien verfügen nicht nur über außergewöhnliche physikalische Eigenschaften, sie können auch ihre Form und ihr Volumen verändern. Ermöglicht werden diese Anpassungen während der Morphogenese und des Wachstums sowohl durch die Bildung neuer Gewebe, als auch die Umformung und/oder Reparatur alter Gewebe. Zusätzlich führen Form? oder Volumenänderungen in Geweben häufig zur Generierung von Kräften (Aktuation) und daraus resultierenden Bewegungen. Ein bekanntes Beispiel dafür ist der feuchtigkeitsgetriebene Öffnungs? und Schließmechanismus der Schuppen von Kiefernzapfen, die ausschließlich aus totem Gewebe ohne aktiven Metabolismus bestehen. Bestimmend für Wachstum und Aktuation sind dabei nicht nur biochemische Faktoren sondern auch physikalische Randbedingung definiert durch die Umgebung und die Gewebearchitektur. Die vorliegende Habilitationsschrift basiert auf biophysikalischen Arbeiten der Gruppe „Biomimetic Actuation and Tissue Growth“ zu wachstums? und quellungsbedingten Formänderungen biologischer Systeme. Physikalische Mechanismen von Gewebewachstum und Quellprozessen unter dem kontrollierenden Einfluss von geometrischen Randbedingungen werden mit theoretischen und experimentellen Methoden untersucht und erklärt. Die gewonnenen Ergebnisse tragen nicht nur zum Verständnis grundlegender Wachstums? und Morphogeneseprozesse bei, sie könnten zukünftig auch für die Entwicklung neuer Materialien für die Medizin und Robotik von Nutzen sein. KW - tissue growth KW - actuation KW - swelling KW - biomechanics KW - biophysics KW - Biomechanik KW - Aktuation KW - Gewebewachstum KW - Biophysik KW - Morphogenese Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-96554 ER - TY - THES A1 - Deresch, Andreas T1 - Modellierung von Röntgenspektren für technische Anwendungen Y1 - 2015 ER - TY - GEN A1 - Das, Samir A1 - Pradhan, Basudev T1 - Photophysical and photochemical properties of a family of isoelectronic tris chelated ruthenium(II) aza-/azo-aromatic complexes N2 - We have investigated the electrochemical, spectroscopic and electroluminescent properties of a family of aza-aromatic complexes of ruthenium of type [RuII(bpy/phen)2(L)]2+ (4d6) with three isomeric L ligands, where, bpy = 2,2′-bipyridine, phen = 1,10-phenanthroline and the L ligands are 3-(2-pyridyl)[1,2,4]triazolo[1,5-a]pyridine (L1), 3-(2-pyridyl[1,2,3])triazolo[1,5-a]pyridine (L2) and 2-(2-pyridyl)[1,2,4]triazolo[1,5-a]pyridine (L3). The complexes display two bands in the visible region near 410–420 and 440–450 nm. The complexes are diamagnetic and show well defined 1H NMR lines. They are electroactive in acetonitrile solution and exhibit a well defined RuII/RuIII couple near 1.20 to 1.30 V and −1.40 to −1.50 V due to ligand reduction versus Saturated Calomel Electrode (SCE). The solutions are also luminescent, with peaks are near 600 nm. All the complexes are electroluminescent in nature with peaks lying near 580 nm. L1 and L3 ligated complexes with two bpy co-ligands show weak photoluminescence (PL) but stronger electroluminescence (EL) compared to corresponding L2 ligated analogues. T3 - Zweitveröffentlichungen der Universität Potsdam : Mathematisch-Naturwissenschaftliche Reihe - 303 Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-102320 SP - 73726 EP - 73731 ER - TY - THES A1 - Bittermann, Klaus T1 - Semi-empirical sea-level modelling T1 - Semiempirische Meeresspiegelmodellierung N2 - Semi-empirical sea-level models (SEMs) exploit physically motivated empirical relationships between global sea level and certain drivers, in the following global mean temperature. This model class evolved as a supplement to process-based models (Rahmstorf (2007)) which were unable to fully represent all relevant processes. They thus failed to capture past sea-level change (Rahmstorf et al. (2012)) and were thought likely to underestimate future sea-level rise. Semi-empirical models were found to be a fast and useful tool for exploring the uncertainties in future sea-level rise, consistently giving significantly higher projections than process-based models. In the following different aspects of semi-empirical sea-level modelling have been studied. Models were first validated using various data sets of global sea level and temperature. SEMs were then used on the glacier contribution to sea level, and to infer past global temperature from sea-level data via inverse modelling. Periods studied encompass the instrumental period, covered by tide gauges (starting 1700 CE (Common Era) in Amsterdam) and satellites (first launched in 1992 CE), the era from 1000 BCE (before CE) to present, and the full length of the Holocene (using proxy data). Accordingly different data, model formulations and implementations have been used. It could be shown in Bittermann et al. (2013) that SEMs correctly predict 20th century sea-level when calibrated with data until 1900 CE. SEMs also turned out to give better predictions than the Intergovernmental Panel on Climate Change (IPCC) 4th assessment report (AR4, IPCC (2007)) models, for the period from 1961–2003 CE. With the first multi-proxy reconstruction of global sea-level as input, estimate of the human-induced component of modern sea-level change and projections of future sea-level rise were calculated (Kopp et al. (2016)). It turned out with 90% confidence that more than 40 % of the observed 20th century sea-level rise is indeed anthropogenic. With the new semi-empirical and IPCC (2013) 5th assessment report (AR5) projections the gap between SEM and process-based model projections closes, giving higher credibility to both. Combining all scenarios, from strong mitigation to business as usual, a global sea-level rise of 28–131 cm relative to 2000 CE, is projected with 90% confidence. The decision for a low carbon pathway could halve the expected global sea-level rise by 2100 CE. Present day temperature and thus sea level are driven by the globally acting greenhouse-gas forcing. Unlike that, the Milankovich forcing, acting on Holocene timescales, results mainly in a northern-hemisphere temperature change. Therefore a semi-empirical model can be driven with northernhemisphere temperatures, which makes it possible to model the main subcomponent of sea-level change over this period. It showed that an additional positive constant rate of the order of the estimated Antarctic sea-level contribution is then required to explain the sea-level evolution over the Holocene. Thus the global sea level, following the climatic optimum, can be interpreted as the sum of a temperature induced sea-level drop and a positive long-term contribution, likely an ongoing response to deglaciation coming from Antarctica. N2 - Semiempirische Meeresspiegelmodelle (SEMe) nutzen die physikalisch motivierte, empirische Beziehung des globalen Meeresspiegels zu einem bestimmten Antrieb. Im Folgenden ist das die mittlere globale Temperatur. Diese Modellklasse entstand als Ergänzung zu prozeßbasierten Modellen, die nicht alle relevanten Prozesse abbilden konnten (Rahmstorf (2007)) und die deshalb weder den beobachteten Meeresspiegel erklären konnten (Rahmstorf et al. (2012)) noch vertrauenswürdige Zukunftsprojektionen lieferten. Semiempirische Modelle sind eine gute und schnelle Option, die Unsicherheit im zukünftigen Meeresspiegelanstieg auszuloten, wobei sie konsistent höhere Zukunftsprojektionen lieferten als prozeßbasierte Modelle. Im Folgenden wurden verschiedene Aspekte der semiempirischen Meeresspiegelmodellierung untersucht. Modelle wurden erst mit verschiedenen globalen Temperatur- und Meeresspiegeldatensätzen validiert. SEMe wurden dann auf den Meeresspiegelbeitrag von Gletschern angewandt und genutzt, um die globale Temperatur aus Meeresspiegeldaten abzuleiten. Die untersuchten Zeiträume variieren zwischen dem instrumentellen Abschnitt mit Pegelstandsmessungen (seit dem Jahr 1700 in Amsterdam) und Satellitendaten (seit 1992), dem Zeitraum seit 1000 vor Christus und dem gesamten Holozän (mittels Proxydaten). Entsprechend wurden verschiedene Daten, Modellformulierungen und -implementationen benutzt. Es konnte in Bittermann et al. (2013) gezeigt werden, dass SEMe den beobachteten Meeresspiegel des 20sten Jahrhunderts korrekt vorhersagen können, wenn sie bis zum Jahr 1900 kalibriert wurden. Auch für den Zeitraum 1961 bis 2003 lieferten SEMe bessere Vorhersagen als der vierte Sachstandsbericht des Intergovernmental Panel on Climate Change (AR4, IPCC (2007)). Mit der ersten globalen multi-proxy Rekonstruktion des globalen Meeresspiegels als Input konnten sowohl der anthropogene Anteil des modernen Meeresspiegelanstiegs als auch Zukunftsprojektionen berechnet werden (Kopp et al. (2016)). Es zeigt sich mit 90% Sicherheit, dass mehr als 40 % des beobachteten Meeresspiegelanstiegs im 20sten Jahrhundert anthropogenen Ursprungs sind. Mit den neuen semiempirischen Zukunftsprojektionen und denen des fünften Sachstandsberichtes (AR5) des IPCC (2013) läßt sich die Kluft zwischen SEMen und prozeßbasierten Modellen schließen, was beide vertrauenswürdiger macht. Über alle Szenarien hinweg, von starker Treibhausgaseinsparung bis zum ungebremsten Ausstoß, ergibt sich, mit 90% Sicherheit, zwischen 2000 und 2100 ein Meeresspiegelanstieg von 28 bis 131 cm. Die Entscheidung starker Treibhausgaseinsparungen kann den erwarteten globalen Meeresspiegelanstieg im Jahr 2100 halbieren. Die gegenwärtige globale Temperatur, und damit der globale Meeresspiegel, werden von dem global wirkenden Treibhausgasforcing bestimmt. Im Gegensatz dazu wirkt das orbitale Forcing, welches über Holozän-Zeitskalen dominiert, hauptsächlich auf die Nordhemisphäre. Deshalb kann man ein SEM mit Nordhemisphärentemperaturen antreiben und dadurch die Hauptkomponente der Meeresspiegeländerung über das Holozän simulieren. Es stellte sich heraus, dass eine zusätzliche konstante Rate, von der Größenordnung des antarktischen Beitrags zum Meeresspiegel, nötig ist, um den Meeresspiegelverlauf des Holozäns zu erklären. Der Meeresspiegel seit dem Holozän-Klimaoptimum kann also als eine Summe von temperaturbedingtem Fallen und einem langfristigen positiven Beitrag, wahrscheinlich einer andauernden Reaktion auf die Deglaziation der Antarktis, interpretiert werden. KW - sea level KW - Meeresspiegel KW - climate change KW - Klimawandel KW - projections KW - Projektionen KW - anthropogenic sea level KW - anthropogener Meeresspiegel KW - Holocene KW - Holozän KW - semi-empirical models KW - semiempirische Modelle Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:kobv:517-opus4-93881 ER - TY - THES A1 - Anielski, Alexander T1 - Entwicklung einer mikrofluidischen, adaptiv geregelten Messapparatur zur quantitativen Untersuchung von Chemotaxis mit Hilfe der Flussfotolyse KW - Flussfotolyse KW - Konzentration KW - Chemotaxis KW - Mikrokanal KW - Dictyostelium KW - flow photolysis KW - concentration KW - chemotaxis KW - microchannel KW - Dictyostelium Y1 - 2015 ER -